19:45:49:245 -> SSID found!
19:45:50:252 -> Connecting to WiFi (attempt #0)
19:45:55:861 -> Connected to WiFi!
19:45:55:862 -> Connecting to AIO MQTT (attempt #0)
19:45:55:862 -> WiFi Status: 20
19:45:59:952 -> Registering hardware with WipperSnapper...
19:45:59:952 -> Registering hardware with IO...
19:45:59:952 -> Encoding registration request...Encoding registration msg...Published!
19:46:00:164 -> Polling for registration message response...2
19:46:01:155 -> GOT Registration Response Message:
19:46:01:155 -> Hardware Response Msg:
19:46:01:155 -> 	GPIO Pins: 16
19:46:01:155 -> 	Analog Pins: 6
19:46:01:155 -> 	Reference voltage: 2.60v
19:46:01:278 -> Completed registration process, configuration next!
19:46:01:279 -> Polling for message containing hardware configuration...
19:46:01:299 -> Polling for message containing hardware configuration...
19:46:01:312 -> cbSignalTopic: New Msg on Signal Topic
19:46:01:312 -> 2 bytes.
19:46:01:312 -> decodeSignalMsg
19:46:01:312 -> cbSignalMsg
19:46:01:312 -> Sub-messages found: 1
19:46:01:312 -> Signal Msg Tag: Pin Configuration
19:46:01:312 -> Initial Pin Configuration Complete!
19:46:01:312 -> Publishing to pin config complete...
19:46:01:323 -> * NEW MESSAGE on Signal of type UART: 
19:46:01:323 -> 28 bytes.
19:46:01:324 -> [Message Type]: wippersnapper_signal_v1_UARTRequest_req_uart_device_attach_tag
19:46:01:415 -> [INFO, UART]: PM25 UART driver initialized!
19:46:01:416 -> PUBLISHING: UART Attach Response...Published!
19:46:01:587 -> Hardware configured successfully!
19:46:13:717 -> Registration and configuration complete!
19:46:13:717 -> Running application...
19:46:13:832 -> Connected to WiFi!
19:46:13:832 -> Connecting to AIO MQTT (attempt #0)
19:46:13:833 -> WiFi Status: 20
19:46:17:863 -> PING!
19:46:17:986 -> [UART, PM25] Reading data...
19:46:17:987 -> [UART, PM25] Read data OK
19:46:17:987 -> 
19:46:17:987 -> ---------------------------------------
19:46:17:987 -> Concentration Units (standard)
19:46:17:987 -> ---------------------------------------
19:46:17:987 -> PM 1.0: 84		PM 2.5: 162		PM 10: 182
19:46:17:987 -> Concentration Units (environmental)
19:46:17:987 -> ---------------------------------------
19:46:17:987 -> PM 1.0: 55		PM 2.5: 107		PM 10: 121
19:46:17:987 -> ---------------------------------------
19:46:17:987 -> [UART] Publishing event to IO..Published!
19:46:22:481 -> PING!
19:46:27:205 -> PING!
19:46:31:890 -> PING!
19:46:36:514 -> PING!
19:46:41:228 -> PING!
19:46:45:923 -> PING!
19:46:48:187 -> [UART, PM25] Reading data...
19:46:48:188 -> [UART, PM25] Read data OK
19:46:48:188 -> 
19:46:48:188 -> ---------------------------------------
19:46:48:188 -> Concentration Units (standard)
19:46:48:188 -> ---------------------------------------
19:46:48:188 -> PM 1.0: 86		PM 2.5: 164		PM 10: 185
19:46:48:188 -> Concentration Units (environmental)
19:46:48:188 -> ---------------------------------------
19:46:48:188 -> PM 1.0: 57		PM 2.5: 109		PM 10: 123
19:46:48:188 -> ---------------------------------------
19:46:48:188 -> [UART] Publishing event to IO..Published!
19:46:50:642 -> PING!
19:46:55:337 -> PING!
19:46:59:971 -> PING!
19:47:04:674 -> PING!
19:47:09:388 -> PING!
19:47:14:083 -> PING!
19:47:18:387 -> [UART, PM25] Reading data...
19:47:18:387 -> [UART, PM25] Read data OK
19:47:18:388 -> 
19:47:18:388 -> ---------------------------------------
19:47:18:388 -> Concentration Units (standard)
19:47:18:388 -> ---------------------------------------
19:47:18:388 -> PM 1.0: 86		PM 2.5: 164		PM 10: 185
19:47:18:388 -> Concentration Units (environmental)
19:47:18:388 -> ---------------------------------------
19:47:18:388 -> PM 1.0: 57		PM 2.5: 109		PM 10: 123
19:47:18:388 -> ---------------------------------------
19:47:18:389 -> [UART] Publishing event to IO..Published!
19:47:18:902 -> PING!
19:47:19:013 -> Dropped a packet
19:47:23:606 -> PING!
19:47:28:311 -> PING!
19:47:32:927 -> PING!
19:47:37:651 -> PING!
19:47:37:844 -> STATUS LED BLINK KAT
19:47:42:363 -> PING!
19:47:47:058 -> PING!
19:47:48:903 -> [UART, PM25] Reading data...
19:47:48:904 -> [UART, PM25] Read data OK
19:47:48:904 -> 
19:47:48:904 -> ---------------------------------------
19:47:48:904 -> Concentration Units (standard)
19:47:48:904 -> ---------------------------------------
19:47:48:904 -> PM 1.0: 86		PM 2.5: 164		PM 10: 185
19:47:48:904 -> Concentration Units (environmental)
19:47:48:904 -> ---------------------------------------
19:47:48:904 -> PM 1.0: 57		PM 2.5: 109		PM 10: 123
19:47:48:904 -> ---------------------------------------
19:47:48:904 -> [UART] Publishing event to IO..Published!
19:47:51:768 -> PING!
19:47:56:475 -> PING!
19:48:01:198 -> PING!
19:48:05:895 -> PING!
19:48:10:610 -> PING!
19:48:15:335 -> PING!
19:48:19:108 -> [UART, PM25] Reading data...
19:48:19:108 -> [UART, PM25] Read data OK
19:48:19:109 -> 
19:48:19:109 -> ---------------------------------------
19:48:19:109 -> Concentration Units (standard)
19:48:19:109 -> ---------------------------------------
19:48:19:109 -> PM 1.0: 85		PM 2.5: 161		PM 10: 182
19:48:19:109 -> Concentration Units (environmental)
19:48:19:109 -> ---------------------------------------
19:48:19:109 -> PM 1.0: 56		PM 2.5: 107		PM 10: 121
19:48:19:109 -> ---------------------------------------
19:48:19:110 -> [UART] Publishing event to IO..Published!
19:48:20:033 -> PING!
19:48:24:757 -> PING!
19:48:29:470 -> PING!
19:48:34:174 -> PING!
19:48:38:888 -> PING!
19:48:43:583 -> PING!
19:48:48:306 -> PING!
19:48:49:319 -> [UART, PM25] Reading data...
19:48:49:320 -> [UART, PM25] Read data OK
19:48:49:320 -> 
19:48:49:320 -> ---------------------------------------
19:48:49:320 -> Concentration Units (standard)
19:48:49:320 -> ---------------------------------------
19:48:49:320 -> PM 1.0: 87		PM 2.5: 162		PM 10: 182
19:48:49:320 -> Concentration Units (environmental)
19:48:49:320 -> ---------------------------------------
19:48:49:320 -> PM 1.0: 57		PM 2.5: 107		PM 10: 121
19:48:49:320 -> ---------------------------------------
19:48:49:321 -> [UART] Publishing event to IO..Published!
19:48:53:007 -> PING!
19:48:57:728 -> PING!
19:49:02:441 -> PING!
19:49:07:126 -> PING!
19:49:11:760 -> PING!
19:49:16:463 -> PING!
19:49:19:539 -> [UART, PM25] Reading data...
19:49:19:540 -> [UART, PM25] Read data OK
19:49:19:540 -> 
19:49:19:540 -> ---------------------------------------
19:49:19:540 -> Concentration Units (standard)
19:49:19:540 -> ---------------------------------------
19:49:19:540 -> PM 1.0: 87		PM 2.5: 164		PM 10: 182
19:49:19:540 -> Concentration Units (environmental)
19:49:19:540 -> ---------------------------------------
19:49:19:540 -> PM 1.0: 57		PM 2.5: 109		PM 10: 121
19:49:19:540 -> ---------------------------------------
19:49:19:540 -> [UART] Publishing event to IO..Published!
19:49:21:174 -> PING!
19:49:25:888 -> PING!
19:49:30:602 -> PING!
19:49:35:286 -> PING!
19:49:38:860 -> STATUS LED BLINK KAT
19:49:39:917 -> PING!
19:49:44:612 -> PING!
19:49:49:636 -> PING!
19:49:49:860 -> [UART, PM25] Reading data...
19:49:49:860 -> [UART, PM25] Data not available.
19:49:49:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:860 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:860 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:880 -> [UART, PM25] Reading data...
19:49:49:881 -> [UART, PM25] Data not available.
19:49:49:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:881 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:881 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:902 -> [UART, PM25] Reading data...
19:49:49:902 -> [UART, PM25] Data not available.
19:49:49:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:902 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:902 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:922 -> [UART, PM25] Reading data...
19:49:49:923 -> [UART, PM25] Data not available.
19:49:49:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:923 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:923 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:943 -> [UART, PM25] Reading data...
19:49:49:944 -> [UART, PM25] Data not available.
19:49:49:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:944 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:944 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:964 -> [UART, PM25] Reading data...
19:49:49:965 -> [UART, PM25] Data not available.
19:49:49:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:965 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:965 -> [UART, PM25] Uart available, resetting event queue..
19:49:49:985 -> [UART, PM25] Reading data...
19:49:49:986 -> [UART, PM25] Data not available.
19:49:49:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:49:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:49:986 -> [UART, PM25] Uart available, clearing write errors..
19:49:49:986 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:006 -> [UART, PM25] Reading data...
19:49:50:007 -> [UART, PM25] Data not available.
19:49:50:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:007 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:007 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:028 -> [UART, PM25] Reading data...
19:49:50:028 -> [UART, PM25] Data not available.
19:49:50:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:028 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:028 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:048 -> [UART, PM25] Reading data...
19:49:50:049 -> [UART, PM25] Data not available.
19:49:50:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:049 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:049 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:069 -> [UART, PM25] Reading data...
19:49:50:069 -> [UART, PM25] Data not available.
19:49:50:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:070 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:070 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:090 -> [UART, PM25] Reading data...
19:49:50:091 -> [UART, PM25] Data not available.
19:49:50:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:091 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:091 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:121 -> [UART, PM25] Reading data...
19:49:50:121 -> [UART, PM25] Data not available.
19:49:50:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:121 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:121 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:133 -> [UART, PM25] Reading data...
19:49:50:133 -> [UART, PM25] Data not available.
19:49:50:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:133 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:133 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:153 -> [UART, PM25] Reading data...
19:49:50:154 -> [UART, PM25] Data not available.
19:49:50:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:154 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:154 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:174 -> [UART, PM25] Reading data...
19:49:50:175 -> [UART, PM25] Data not available.
19:49:50:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:175 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:175 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:195 -> [UART, PM25] Reading data...
19:49:50:196 -> [UART, PM25] Data not available.
19:49:50:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:196 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:196 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:216 -> [UART, PM25] Reading data...
19:49:50:217 -> [UART, PM25] Data not available.
19:49:50:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:217 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:217 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:237 -> [UART, PM25] Reading data...
19:49:50:238 -> [UART, PM25] Data not available.
19:49:50:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:238 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:238 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:258 -> [UART, PM25] Reading data...
19:49:50:259 -> [UART, PM25] Data not available.
19:49:50:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:259 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:259 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:279 -> [UART, PM25] Reading data...
19:49:50:280 -> [UART, PM25] Data not available.
19:49:50:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:280 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:280 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:300 -> [UART, PM25] Reading data...
19:49:50:301 -> [UART, PM25] Data not available.
19:49:50:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:301 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:301 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:321 -> [UART, PM25] Reading data...
19:49:50:322 -> [UART, PM25] Data not available.
19:49:50:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:322 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:322 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:342 -> [UART, PM25] Reading data...
19:49:50:343 -> [UART, PM25] Data not available.
19:49:50:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:343 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:343 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:363 -> [UART, PM25] Reading data...
19:49:50:364 -> [UART, PM25] Data not available.
19:49:50:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:364 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:364 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:384 -> [UART, PM25] Reading data...
19:49:50:385 -> [UART, PM25] Data not available.
19:49:50:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:385 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:385 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:405 -> [UART, PM25] Reading data...
19:49:50:406 -> [UART, PM25] Data not available.
19:49:50:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:406 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:406 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:426 -> [UART, PM25] Reading data...
19:49:50:427 -> [UART, PM25] Data not available.
19:49:50:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:427 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:427 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:448 -> [UART, PM25] Reading data...
19:49:50:448 -> [UART, PM25] Data not available.
19:49:50:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:448 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:448 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:468 -> [UART, PM25] Reading data...
19:49:50:469 -> [UART, PM25] Data not available.
19:49:50:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:469 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:469 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:489 -> [UART, PM25] Reading data...
19:49:50:490 -> [UART, PM25] Data not available.
19:49:50:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:490 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:490 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:510 -> [UART, PM25] Reading data...
19:49:50:511 -> [UART, PM25] Data not available.
19:49:50:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:511 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:511 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:531 -> [UART, PM25] Reading data...
19:49:50:532 -> [UART, PM25] Data not available.
19:49:50:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:532 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:532 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:552 -> [UART, PM25] Reading data...
19:49:50:553 -> [UART, PM25] Data not available.
19:49:50:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:553 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:553 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:573 -> [UART, PM25] Reading data...
19:49:50:574 -> [UART, PM25] Data not available.
19:49:50:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:574 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:574 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:594 -> [UART, PM25] Reading data...
19:49:50:595 -> [UART, PM25] Data not available.
19:49:50:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:595 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:595 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:615 -> [UART, PM25] Reading data...
19:49:50:616 -> [UART, PM25] Data not available.
19:49:50:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:616 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:616 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:639 -> [UART, PM25] Reading data...
19:49:50:640 -> [UART, PM25] Data not available.
19:49:50:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:640 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:640 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:657 -> [UART, PM25] Reading data...
19:49:50:658 -> [UART, PM25] Data not available.
19:49:50:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:658 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:658 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:678 -> [UART, PM25] Reading data...
19:49:50:678 -> [UART, PM25] Data not available.
19:49:50:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:679 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:679 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:699 -> [UART, PM25] Reading data...
19:49:50:700 -> [UART, PM25] Data not available.
19:49:50:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:700 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:700 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:720 -> [UART, PM25] Reading data...
19:49:50:721 -> [UART, PM25] Data not available.
19:49:50:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:721 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:721 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:741 -> [UART, PM25] Reading data...
19:49:50:742 -> [UART, PM25] Data not available.
19:49:50:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:742 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:742 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:763 -> [UART, PM25] Reading data...
19:49:50:763 -> [UART, PM25] Data not available.
19:49:50:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:763 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:763 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:783 -> [UART, PM25] Reading data...
19:49:50:784 -> [UART, PM25] Data not available.
19:49:50:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:784 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:784 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:804 -> [UART, PM25] Reading data...
19:49:50:805 -> [UART, PM25] Data not available.
19:49:50:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:805 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:805 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:825 -> [UART, PM25] Reading data...
19:49:50:826 -> [UART, PM25] Data not available.
19:49:50:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:826 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:826 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:846 -> [UART, PM25] Reading data...
19:49:50:847 -> [UART, PM25] Data not available.
19:49:50:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:847 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:847 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:867 -> [UART, PM25] Reading data...
19:49:50:868 -> [UART, PM25] Data not available.
19:49:50:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:868 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:868 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:888 -> [UART, PM25] Reading data...
19:49:50:888 -> [UART, PM25] Data not available.
19:49:50:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:889 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:889 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:909 -> [UART, PM25] Reading data...
19:49:50:910 -> [UART, PM25] Data not available.
19:49:50:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:910 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:910 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:930 -> [UART, PM25] Reading data...
19:49:50:931 -> [UART, PM25] Data not available.
19:49:50:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:931 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:931 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:951 -> [UART, PM25] Reading data...
19:49:50:952 -> [UART, PM25] Data not available.
19:49:50:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:952 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:952 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:972 -> [UART, PM25] Reading data...
19:49:50:973 -> [UART, PM25] Data not available.
19:49:50:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:973 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:973 -> [UART, PM25] Uart available, resetting event queue..
19:49:50:993 -> [UART, PM25] Reading data...
19:49:50:994 -> [UART, PM25] Data not available.
19:49:50:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:50:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:50:994 -> [UART, PM25] Uart available, clearing write errors..
19:49:50:994 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:014 -> [UART, PM25] Reading data...
19:49:51:015 -> [UART, PM25] Data not available.
19:49:51:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:015 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:015 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:035 -> [UART, PM25] Reading data...
19:49:51:036 -> [UART, PM25] Data not available.
19:49:51:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:036 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:036 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:056 -> [UART, PM25] Reading data...
19:49:51:058 -> [UART, PM25] Data not available.
19:49:51:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:058 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:058 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:077 -> [UART, PM25] Reading data...
19:49:51:078 -> [UART, PM25] Data not available.
19:49:51:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:078 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:078 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:098 -> [UART, PM25] Reading data...
19:49:51:099 -> [UART, PM25] Data not available.
19:49:51:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:099 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:099 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:119 -> [UART, PM25] Reading data...
19:49:51:120 -> [UART, PM25] Data not available.
19:49:51:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:120 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:120 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:151 -> [UART, PM25] Reading data...
19:49:51:152 -> [UART, PM25] Data not available.
19:49:51:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:152 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:152 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:161 -> [UART, PM25] Reading data...
19:49:51:162 -> [UART, PM25] Data not available.
19:49:51:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:162 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:162 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:182 -> [UART, PM25] Reading data...
19:49:51:183 -> [UART, PM25] Data not available.
19:49:51:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:183 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:183 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:212 -> [UART, PM25] Reading data...
19:49:51:217 -> [UART, PM25] Data not available.
19:49:51:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:217 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:217 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:244 -> [UART, PM25] Reading data...
19:49:51:244 -> [UART, PM25] Data not available.
19:49:51:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:244 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:244 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:245 -> [UART, PM25] Reading data...
19:49:51:245 -> [UART, PM25] Data not available.
19:49:51:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:246 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:246 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:266 -> [UART, PM25] Reading data...
19:49:51:267 -> [UART, PM25] Data not available.
19:49:51:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:267 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:267 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:287 -> [UART, PM25] Reading data...
19:49:51:288 -> [UART, PM25] Data not available.
19:49:51:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:288 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:288 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:308 -> [UART, PM25] Reading data...
19:49:51:309 -> [UART, PM25] Data not available.
19:49:51:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:309 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:309 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:329 -> [UART, PM25] Reading data...
19:49:51:330 -> [UART, PM25] Data not available.
19:49:51:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:330 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:330 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:350 -> [UART, PM25] Reading data...
19:49:51:351 -> [UART, PM25] Data not available.
19:49:51:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:351 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:351 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:371 -> [UART, PM25] Reading data...
19:49:51:372 -> [UART, PM25] Data not available.
19:49:51:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:372 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:372 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:392 -> [UART, PM25] Reading data...
19:49:51:393 -> [UART, PM25] Data not available.
19:49:51:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:393 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:393 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:413 -> [UART, PM25] Reading data...
19:49:51:414 -> [UART, PM25] Data not available.
19:49:51:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:414 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:414 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:434 -> [UART, PM25] Reading data...
19:49:51:435 -> [UART, PM25] Data not available.
19:49:51:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:435 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:435 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:455 -> [UART, PM25] Reading data...
19:49:51:456 -> [UART, PM25] Data not available.
19:49:51:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:456 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:456 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:476 -> [UART, PM25] Reading data...
19:49:51:477 -> [UART, PM25] Data not available.
19:49:51:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:477 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:477 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:497 -> [UART, PM25] Reading data...
19:49:51:498 -> [UART, PM25] Data not available.
19:49:51:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:498 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:498 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:518 -> [UART, PM25] Reading data...
19:49:51:519 -> [UART, PM25] Data not available.
19:49:51:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:519 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:519 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:539 -> [UART, PM25] Reading data...
19:49:51:539 -> [UART, PM25] Data not available.
19:49:51:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:540 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:540 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:560 -> [UART, PM25] Reading data...
19:49:51:561 -> [UART, PM25] Data not available.
19:49:51:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:561 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:561 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:581 -> [UART, PM25] Reading data...
19:49:51:582 -> [UART, PM25] Data not available.
19:49:51:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:582 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:582 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:602 -> [UART, PM25] Reading data...
19:49:51:603 -> [UART, PM25] Data not available.
19:49:51:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:603 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:603 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:623 -> [UART, PM25] Reading data...
19:49:51:624 -> [UART, PM25] Data not available.
19:49:51:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:624 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:624 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:644 -> [UART, PM25] Reading data...
19:49:51:645 -> [UART, PM25] Data not available.
19:49:51:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:645 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:645 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:678 -> [UART, PM25] Reading data...
19:49:51:678 -> [UART, PM25] Data not available.
19:49:51:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:678 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:678 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:687 -> [UART, PM25] Reading data...
19:49:51:687 -> [UART, PM25] Data not available.
19:49:51:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:687 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:687 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:707 -> [UART, PM25] Reading data...
19:49:51:708 -> [UART, PM25] Data not available.
19:49:51:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:708 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:708 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:728 -> [UART, PM25] Reading data...
19:49:51:729 -> [UART, PM25] Data not available.
19:49:51:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:729 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:729 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:749 -> [UART, PM25] Reading data...
19:49:51:750 -> [UART, PM25] Data not available.
19:49:51:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:750 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:750 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:770 -> [UART, PM25] Reading data...
19:49:51:771 -> [UART, PM25] Data not available.
19:49:51:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:771 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:771 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:791 -> [UART, PM25] Reading data...
19:49:51:792 -> [UART, PM25] Data not available.
19:49:51:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:792 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:792 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:812 -> [UART, PM25] Reading data...
19:49:51:813 -> [UART, PM25] Data not available.
19:49:51:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:813 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:813 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:833 -> [UART, PM25] Reading data...
19:49:51:834 -> [UART, PM25] Data not available.
19:49:51:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:834 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:834 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:854 -> [UART, PM25] Reading data...
19:49:51:854 -> [UART, PM25] Data not available.
19:49:51:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:854 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:854 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:875 -> [UART, PM25] Reading data...
19:49:51:875 -> [UART, PM25] Data not available.
19:49:51:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:876 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:876 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:896 -> [UART, PM25] Reading data...
19:49:51:897 -> [UART, PM25] Data not available.
19:49:51:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:897 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:897 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:917 -> [UART, PM25] Reading data...
19:49:51:918 -> [UART, PM25] Data not available.
19:49:51:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:918 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:918 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:938 -> [UART, PM25] Reading data...
19:49:51:939 -> [UART, PM25] Data not available.
19:49:51:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:939 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:939 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:959 -> [UART, PM25] Reading data...
19:49:51:960 -> [UART, PM25] Data not available.
19:49:51:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:960 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:960 -> [UART, PM25] Uart available, resetting event queue..
19:49:51:980 -> [UART, PM25] Reading data...
19:49:51:981 -> [UART, PM25] Data not available.
19:49:51:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:51:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:51:981 -> [UART, PM25] Uart available, clearing write errors..
19:49:51:981 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:001 -> [UART, PM25] Reading data...
19:49:52:002 -> [UART, PM25] Data not available.
19:49:52:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:002 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:002 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:022 -> [UART, PM25] Reading data...
19:49:52:023 -> [UART, PM25] Data not available.
19:49:52:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:023 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:023 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:043 -> [UART, PM25] Reading data...
19:49:52:044 -> [UART, PM25] Data not available.
19:49:52:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:044 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:044 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:064 -> [UART, PM25] Reading data...
19:49:52:065 -> [UART, PM25] Data not available.
19:49:52:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:065 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:065 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:085 -> [UART, PM25] Reading data...
19:49:52:086 -> [UART, PM25] Data not available.
19:49:52:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:086 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:086 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:106 -> [UART, PM25] Reading data...
19:49:52:107 -> [UART, PM25] Data not available.
19:49:52:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:107 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:107 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:128 -> [UART, PM25] Reading data...
19:49:52:129 -> [UART, PM25] Data not available.
19:49:52:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:129 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:129 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:148 -> [UART, PM25] Reading data...
19:49:52:149 -> [UART, PM25] Data not available.
19:49:52:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:149 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:149 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:169 -> [UART, PM25] Reading data...
19:49:52:169 -> [UART, PM25] Data not available.
19:49:52:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:169 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:169 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:191 -> [UART, PM25] Reading data...
19:49:52:191 -> [UART, PM25] Data not available.
19:49:52:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:191 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:191 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:211 -> [UART, PM25] Reading data...
19:49:52:212 -> [UART, PM25] Data not available.
19:49:52:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:212 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:212 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:232 -> [UART, PM25] Reading data...
19:49:52:232 -> [UART, PM25] Data not available.
19:49:52:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:232 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:232 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:253 -> [UART, PM25] Reading data...
19:49:52:254 -> [UART, PM25] Data not available.
19:49:52:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:254 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:254 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:274 -> [UART, PM25] Reading data...
19:49:52:275 -> [UART, PM25] Data not available.
19:49:52:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:275 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:275 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:295 -> [UART, PM25] Reading data...
19:49:52:296 -> [UART, PM25] Data not available.
19:49:52:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:296 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:296 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:316 -> [UART, PM25] Reading data...
19:49:52:317 -> [UART, PM25] Data not available.
19:49:52:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:317 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:317 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:337 -> [UART, PM25] Reading data...
19:49:52:338 -> [UART, PM25] Data not available.
19:49:52:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:338 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:338 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:358 -> [UART, PM25] Reading data...
19:49:52:359 -> [UART, PM25] Data not available.
19:49:52:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:359 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:359 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:379 -> [UART, PM25] Reading data...
19:49:52:380 -> [UART, PM25] Data not available.
19:49:52:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:380 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:380 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:400 -> [UART, PM25] Reading data...
19:49:52:401 -> [UART, PM25] Data not available.
19:49:52:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:401 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:401 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:421 -> [UART, PM25] Reading data...
19:49:52:422 -> [UART, PM25] Data not available.
19:49:52:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:422 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:422 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:442 -> [UART, PM25] Reading data...
19:49:52:443 -> [UART, PM25] Data not available.
19:49:52:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:443 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:443 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:463 -> [UART, PM25] Reading data...
19:49:52:464 -> [UART, PM25] Data not available.
19:49:52:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:464 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:464 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:484 -> [UART, PM25] Reading data...
19:49:52:485 -> [UART, PM25] Data not available.
19:49:52:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:485 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:485 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:505 -> [UART, PM25] Reading data...
19:49:52:506 -> [UART, PM25] Data not available.
19:49:52:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:506 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:506 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:526 -> [UART, PM25] Reading data...
19:49:52:527 -> [UART, PM25] Data not available.
19:49:52:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:527 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:527 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:547 -> [UART, PM25] Reading data...
19:49:52:548 -> [UART, PM25] Data not available.
19:49:52:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:548 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:548 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:568 -> [UART, PM25] Reading data...
19:49:52:569 -> [UART, PM25] Data not available.
19:49:52:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:569 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:569 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:589 -> [UART, PM25] Reading data...
19:49:52:590 -> [UART, PM25] Data not available.
19:49:52:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:590 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:590 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:610 -> [UART, PM25] Reading data...
19:49:52:611 -> [UART, PM25] Data not available.
19:49:52:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:611 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:611 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:631 -> [UART, PM25] Reading data...
19:49:52:632 -> [UART, PM25] Data not available.
19:49:52:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:632 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:632 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:652 -> [UART, PM25] Reading data...
19:49:52:653 -> [UART, PM25] Data not available.
19:49:52:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:653 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:653 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:673 -> [UART, PM25] Reading data...
19:49:52:674 -> [UART, PM25] Data not available.
19:49:52:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:674 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:674 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:705 -> [UART, PM25] Reading data...
19:49:52:705 -> [UART, PM25] Data not available.
19:49:52:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:705 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:705 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:715 -> [UART, PM25] Reading data...
19:49:52:715 -> [UART, PM25] Data not available.
19:49:52:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:716 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:716 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:736 -> [UART, PM25] Reading data...
19:49:52:737 -> [UART, PM25] Data not available.
19:49:52:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:737 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:737 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:757 -> [UART, PM25] Reading data...
19:49:52:758 -> [UART, PM25] Data not available.
19:49:52:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:758 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:758 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:778 -> [UART, PM25] Reading data...
19:49:52:779 -> [UART, PM25] Data not available.
19:49:52:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:779 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:779 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:799 -> [UART, PM25] Reading data...
19:49:52:800 -> [UART, PM25] Data not available.
19:49:52:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:800 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:800 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:821 -> [UART, PM25] Reading data...
19:49:52:821 -> [UART, PM25] Data not available.
19:49:52:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:821 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:821 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:841 -> [UART, PM25] Reading data...
19:49:52:842 -> [UART, PM25] Data not available.
19:49:52:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:842 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:842 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:863 -> [UART, PM25] Reading data...
19:49:52:863 -> [UART, PM25] Data not available.
19:49:52:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:863 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:863 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:883 -> [UART, PM25] Reading data...
19:49:52:884 -> [UART, PM25] Data not available.
19:49:52:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:884 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:884 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:919 -> [UART, PM25] Reading data...
19:49:52:949 -> [UART, PM25] Data not available.
19:49:52:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:949 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:949 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:949 -> [UART, PM25] Reading data...
19:49:52:949 -> [UART, PM25] Data not available.
19:49:52:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:949 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:949 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:949 -> [UART, PM25] Reading data...
19:49:52:949 -> [UART, PM25] Data not available.
19:49:52:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:949 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:949 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:967 -> [UART, PM25] Reading data...
19:49:52:968 -> [UART, PM25] Data not available.
19:49:52:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:968 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:968 -> [UART, PM25] Uart available, resetting event queue..
19:49:52:988 -> [UART, PM25] Reading data...
19:49:52:989 -> [UART, PM25] Data not available.
19:49:52:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:52:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:52:989 -> [UART, PM25] Uart available, clearing write errors..
19:49:52:989 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:010 -> [UART, PM25] Reading data...
19:49:53:010 -> [UART, PM25] Data not available.
19:49:53:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:010 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:010 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:030 -> [UART, PM25] Reading data...
19:49:53:031 -> [UART, PM25] Data not available.
19:49:53:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:031 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:031 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:051 -> [UART, PM25] Reading data...
19:49:53:052 -> [UART, PM25] Data not available.
19:49:53:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:052 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:052 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:072 -> [UART, PM25] Reading data...
19:49:53:073 -> [UART, PM25] Data not available.
19:49:53:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:073 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:073 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:093 -> [UART, PM25] Reading data...
19:49:53:094 -> [UART, PM25] Data not available.
19:49:53:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:094 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:094 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:114 -> [UART, PM25] Reading data...
19:49:53:115 -> [UART, PM25] Data not available.
19:49:53:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:115 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:115 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:135 -> [UART, PM25] Reading data...
19:49:53:136 -> [UART, PM25] Data not available.
19:49:53:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:136 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:136 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:156 -> [UART, PM25] Reading data...
19:49:53:157 -> [UART, PM25] Data not available.
19:49:53:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:157 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:157 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:177 -> [UART, PM25] Reading data...
19:49:53:178 -> [UART, PM25] Data not available.
19:49:53:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:178 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:178 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:198 -> [UART, PM25] Reading data...
19:49:53:198 -> [UART, PM25] Data not available.
19:49:53:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:199 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:199 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:224 -> [UART, PM25] Reading data...
19:49:53:225 -> [UART, PM25] Data not available.
19:49:53:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:225 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:225 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:240 -> [UART, PM25] Reading data...
19:49:53:241 -> [UART, PM25] Data not available.
19:49:53:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:241 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:241 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:261 -> [UART, PM25] Reading data...
19:49:53:261 -> [UART, PM25] Data not available.
19:49:53:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:261 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:261 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:282 -> [UART, PM25] Reading data...
19:49:53:283 -> [UART, PM25] Data not available.
19:49:53:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:283 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:283 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:303 -> [UART, PM25] Reading data...
19:49:53:304 -> [UART, PM25] Data not available.
19:49:53:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:304 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:304 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:324 -> [UART, PM25] Reading data...
19:49:53:325 -> [UART, PM25] Data not available.
19:49:53:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:325 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:325 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:345 -> [UART, PM25] Reading data...
19:49:53:346 -> [UART, PM25] Data not available.
19:49:53:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:346 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:346 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:366 -> [UART, PM25] Reading data...
19:49:53:367 -> [UART, PM25] Data not available.
19:49:53:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:367 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:367 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:387 -> [UART, PM25] Reading data...
19:49:53:388 -> [UART, PM25] Data not available.
19:49:53:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:388 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:388 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:408 -> [UART, PM25] Reading data...
19:49:53:409 -> [UART, PM25] Data not available.
19:49:53:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:409 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:409 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:429 -> [UART, PM25] Reading data...
19:49:53:430 -> [UART, PM25] Data not available.
19:49:53:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:430 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:430 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:450 -> [UART, PM25] Reading data...
19:49:53:451 -> [UART, PM25] Data not available.
19:49:53:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:451 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:451 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:471 -> [UART, PM25] Reading data...
19:49:53:472 -> [UART, PM25] Data not available.
19:49:53:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:472 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:472 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:493 -> [UART, PM25] Reading data...
19:49:53:494 -> [UART, PM25] Data not available.
19:49:53:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:494 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:494 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:514 -> [UART, PM25] Reading data...
19:49:53:514 -> [UART, PM25] Data not available.
19:49:53:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:514 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:514 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:534 -> [UART, PM25] Reading data...
19:49:53:535 -> [UART, PM25] Data not available.
19:49:53:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:535 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:535 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:555 -> [UART, PM25] Reading data...
19:49:53:556 -> [UART, PM25] Data not available.
19:49:53:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:556 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:556 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:576 -> [UART, PM25] Reading data...
19:49:53:577 -> [UART, PM25] Data not available.
19:49:53:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:577 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:577 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:597 -> [UART, PM25] Reading data...
19:49:53:598 -> [UART, PM25] Data not available.
19:49:53:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:598 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:598 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:618 -> [UART, PM25] Reading data...
19:49:53:619 -> [UART, PM25] Data not available.
19:49:53:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:619 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:619 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:639 -> [UART, PM25] Reading data...
19:49:53:640 -> [UART, PM25] Data not available.
19:49:53:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:640 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:640 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:660 -> [UART, PM25] Reading data...
19:49:53:661 -> [UART, PM25] Data not available.
19:49:53:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:661 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:661 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:681 -> [UART, PM25] Reading data...
19:49:53:682 -> [UART, PM25] Data not available.
19:49:53:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:682 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:682 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:702 -> [UART, PM25] Reading data...
19:49:53:703 -> [UART, PM25] Data not available.
19:49:53:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:703 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:703 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:732 -> [UART, PM25] Reading data...
19:49:53:733 -> [UART, PM25] Data not available.
19:49:53:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:733 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:733 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:744 -> [UART, PM25] Reading data...
19:49:53:744 -> [UART, PM25] Data not available.
19:49:53:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:745 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:745 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:765 -> [UART, PM25] Reading data...
19:49:53:765 -> [UART, PM25] Data not available.
19:49:53:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:766 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:766 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:786 -> [UART, PM25] Reading data...
19:49:53:787 -> [UART, PM25] Data not available.
19:49:53:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:787 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:787 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:807 -> [UART, PM25] Reading data...
19:49:53:809 -> [UART, PM25] Data not available.
19:49:53:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:809 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:809 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:829 -> [UART, PM25] Reading data...
19:49:53:829 -> [UART, PM25] Data not available.
19:49:53:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:829 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:829 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:849 -> [UART, PM25] Reading data...
19:49:53:850 -> [UART, PM25] Data not available.
19:49:53:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:850 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:850 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:870 -> [UART, PM25] Reading data...
19:49:53:871 -> [UART, PM25] Data not available.
19:49:53:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:871 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:871 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:891 -> [UART, PM25] Reading data...
19:49:53:892 -> [UART, PM25] Data not available.
19:49:53:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:892 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:892 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:912 -> [UART, PM25] Reading data...
19:49:53:913 -> [UART, PM25] Data not available.
19:49:53:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:913 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:913 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:933 -> [UART, PM25] Reading data...
19:49:53:934 -> [UART, PM25] Data not available.
19:49:53:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:934 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:934 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:954 -> [UART, PM25] Reading data...
19:49:53:955 -> [UART, PM25] Data not available.
19:49:53:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:955 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:955 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:975 -> [UART, PM25] Reading data...
19:49:53:976 -> [UART, PM25] Data not available.
19:49:53:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:976 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:976 -> [UART, PM25] Uart available, resetting event queue..
19:49:53:996 -> [UART, PM25] Reading data...
19:49:53:997 -> [UART, PM25] Data not available.
19:49:53:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:53:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:53:997 -> [UART, PM25] Uart available, clearing write errors..
19:49:53:997 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:017 -> [UART, PM25] Reading data...
19:49:54:018 -> [UART, PM25] Data not available.
19:49:54:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:018 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:018 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:041 -> [UART, PM25] Reading data...
19:49:54:042 -> [UART, PM25] Data not available.
19:49:54:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:042 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:042 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:059 -> [UART, PM25] Reading data...
19:49:54:060 -> [UART, PM25] Data not available.
19:49:54:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:060 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:060 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:080 -> [UART, PM25] Reading data...
19:49:54:081 -> [UART, PM25] Data not available.
19:49:54:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:081 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:081 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:101 -> [UART, PM25] Reading data...
19:49:54:102 -> [UART, PM25] Data not available.
19:49:54:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:102 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:102 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:122 -> [UART, PM25] Reading data...
19:49:54:123 -> [UART, PM25] Data not available.
19:49:54:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:123 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:123 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:143 -> [UART, PM25] Reading data...
19:49:54:144 -> [UART, PM25] Data not available.
19:49:54:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:144 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:144 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:164 -> [UART, PM25] Reading data...
19:49:54:165 -> [UART, PM25] Data not available.
19:49:54:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:165 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:165 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:185 -> [UART, PM25] Reading data...
19:49:54:186 -> [UART, PM25] Data not available.
19:49:54:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:186 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:186 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:206 -> [UART, PM25] Reading data...
19:49:54:207 -> [UART, PM25] Data not available.
19:49:54:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:207 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:207 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:229 -> [UART, PM25] Reading data...
19:49:54:229 -> [UART, PM25] Data not available.
19:49:54:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:229 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:229 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:258 -> [UART, PM25] Reading data...
19:49:54:258 -> [UART, PM25] Data not available.
19:49:54:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:258 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:258 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:269 -> [UART, PM25] Reading data...
19:49:54:269 -> [UART, PM25] Data not available.
19:49:54:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:269 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:269 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:290 -> [UART, PM25] Reading data...
19:49:54:291 -> [UART, PM25] Data not available.
19:49:54:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:291 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:291 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:314 -> [UART, PM25] Reading data...
19:49:54:315 -> [UART, PM25] Data not available.
19:49:54:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:315 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:315 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:332 -> [UART, PM25] Reading data...
19:49:54:333 -> [UART, PM25] Data not available.
19:49:54:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:333 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:333 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:353 -> [UART, PM25] Reading data...
19:49:54:354 -> [UART, PM25] Data not available.
19:49:54:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:354 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:354 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:354 -> PING!
19:49:54:567 -> [UART, PM25] Reading data...
19:49:54:567 -> [UART, PM25] Data not available.
19:49:54:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:568 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:568 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:588 -> [UART, PM25] Reading data...
19:49:54:589 -> [UART, PM25] Data not available.
19:49:54:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:589 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:589 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:609 -> [UART, PM25] Reading data...
19:49:54:610 -> [UART, PM25] Data not available.
19:49:54:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:610 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:610 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:630 -> [UART, PM25] Reading data...
19:49:54:630 -> [UART, PM25] Data not available.
19:49:54:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:631 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:631 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:651 -> [UART, PM25] Reading data...
19:49:54:652 -> [UART, PM25] Data not available.
19:49:54:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:652 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:652 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:688 -> [UART, PM25] Reading data...
19:49:54:706 -> [UART, PM25] Data not available.
19:49:54:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:706 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:706 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:706 -> [UART, PM25] Reading data...
19:49:54:706 -> [UART, PM25] Data not available.
19:49:54:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:706 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:706 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:714 -> [UART, PM25] Reading data...
19:49:54:714 -> [UART, PM25] Data not available.
19:49:54:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:715 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:715 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:736 -> [UART, PM25] Reading data...
19:49:54:737 -> [UART, PM25] Data not available.
19:49:54:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:737 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:737 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:756 -> [UART, PM25] Reading data...
19:49:54:756 -> [UART, PM25] Data not available.
19:49:54:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:757 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:757 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:783 -> [UART, PM25] Reading data...
19:49:54:785 -> [UART, PM25] Data not available.
19:49:54:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:785 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:785 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:798 -> [UART, PM25] Reading data...
19:49:54:799 -> [UART, PM25] Data not available.
19:49:54:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:799 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:799 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:819 -> [UART, PM25] Reading data...
19:49:54:820 -> [UART, PM25] Data not available.
19:49:54:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:820 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:820 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:840 -> [UART, PM25] Reading data...
19:49:54:842 -> [UART, PM25] Data not available.
19:49:54:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:842 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:842 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:861 -> [UART, PM25] Reading data...
19:49:54:862 -> [UART, PM25] Data not available.
19:49:54:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:862 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:862 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:882 -> [UART, PM25] Reading data...
19:49:54:882 -> [UART, PM25] Data not available.
19:49:54:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:882 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:882 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:903 -> [UART, PM25] Reading data...
19:49:54:904 -> [UART, PM25] Data not available.
19:49:54:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:904 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:904 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:924 -> [UART, PM25] Reading data...
19:49:54:925 -> [UART, PM25] Data not available.
19:49:54:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:925 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:925 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:945 -> [UART, PM25] Reading data...
19:49:54:946 -> [UART, PM25] Data not available.
19:49:54:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:946 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:946 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:966 -> [UART, PM25] Reading data...
19:49:54:967 -> [UART, PM25] Data not available.
19:49:54:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:967 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:967 -> [UART, PM25] Uart available, resetting event queue..
19:49:54:987 -> [UART, PM25] Reading data...
19:49:54:988 -> [UART, PM25] Data not available.
19:49:54:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:54:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:54:988 -> [UART, PM25] Uart available, clearing write errors..
19:49:54:988 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:008 -> [UART, PM25] Reading data...
19:49:55:009 -> [UART, PM25] Data not available.
19:49:55:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:009 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:009 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:029 -> [UART, PM25] Reading data...
19:49:55:030 -> [UART, PM25] Data not available.
19:49:55:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:030 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:030 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:050 -> [UART, PM25] Reading data...
19:49:55:051 -> [UART, PM25] Data not available.
19:49:55:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:051 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:051 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:071 -> [UART, PM25] Reading data...
19:49:55:072 -> [UART, PM25] Data not available.
19:49:55:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:072 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:072 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:092 -> [UART, PM25] Reading data...
19:49:55:093 -> [UART, PM25] Data not available.
19:49:55:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:093 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:093 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:114 -> [UART, PM25] Reading data...
19:49:55:114 -> [UART, PM25] Data not available.
19:49:55:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:114 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:114 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:134 -> [UART, PM25] Reading data...
19:49:55:135 -> [UART, PM25] Data not available.
19:49:55:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:135 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:135 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:155 -> [UART, PM25] Reading data...
19:49:55:156 -> [UART, PM25] Data not available.
19:49:55:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:156 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:156 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:176 -> [UART, PM25] Reading data...
19:49:55:177 -> [UART, PM25] Data not available.
19:49:55:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:177 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:177 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:200 -> [UART, PM25] Reading data...
19:49:55:201 -> [UART, PM25] Data not available.
19:49:55:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:201 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:201 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:218 -> [UART, PM25] Reading data...
19:49:55:219 -> [UART, PM25] Data not available.
19:49:55:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:219 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:219 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:239 -> [UART, PM25] Reading data...
19:49:55:240 -> [UART, PM25] Data not available.
19:49:55:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:240 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:240 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:260 -> [UART, PM25] Reading data...
19:49:55:261 -> [UART, PM25] Data not available.
19:49:55:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:261 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:261 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:282 -> [UART, PM25] Reading data...
19:49:55:282 -> [UART, PM25] Data not available.
19:49:55:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:282 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:282 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:302 -> [UART, PM25] Reading data...
19:49:55:302 -> [UART, PM25] Data not available.
19:49:55:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:303 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:303 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:323 -> [UART, PM25] Reading data...
19:49:55:324 -> [UART, PM25] Data not available.
19:49:55:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:324 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:324 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:344 -> [UART, PM25] Reading data...
19:49:55:345 -> [UART, PM25] Data not available.
19:49:55:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:345 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:345 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:365 -> [UART, PM25] Reading data...
19:49:55:366 -> [UART, PM25] Data not available.
19:49:55:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:366 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:366 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:389 -> [UART, PM25] Reading data...
19:49:55:389 -> [UART, PM25] Data not available.
19:49:55:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:389 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:389 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:407 -> [UART, PM25] Reading data...
19:49:55:408 -> [UART, PM25] Data not available.
19:49:55:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:408 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:408 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:428 -> [UART, PM25] Reading data...
19:49:55:429 -> [UART, PM25] Data not available.
19:49:55:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:429 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:429 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:449 -> [UART, PM25] Reading data...
19:49:55:450 -> [UART, PM25] Data not available.
19:49:55:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:450 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:450 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:470 -> [UART, PM25] Reading data...
19:49:55:471 -> [UART, PM25] Data not available.
19:49:55:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:471 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:471 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:491 -> [UART, PM25] Reading data...
19:49:55:492 -> [UART, PM25] Data not available.
19:49:55:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:492 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:492 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:512 -> [UART, PM25] Reading data...
19:49:55:513 -> [UART, PM25] Data not available.
19:49:55:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:513 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:513 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:533 -> [UART, PM25] Reading data...
19:49:55:534 -> [UART, PM25] Data not available.
19:49:55:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:534 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:534 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:554 -> [UART, PM25] Reading data...
19:49:55:555 -> [UART, PM25] Data not available.
19:49:55:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:555 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:555 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:577 -> [UART, PM25] Reading data...
19:49:55:578 -> [UART, PM25] Data not available.
19:49:55:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:578 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:578 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:596 -> [UART, PM25] Reading data...
19:49:55:597 -> [UART, PM25] Data not available.
19:49:55:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:597 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:597 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:617 -> [UART, PM25] Reading data...
19:49:55:618 -> [UART, PM25] Data not available.
19:49:55:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:618 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:618 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:638 -> [UART, PM25] Reading data...
19:49:55:639 -> [UART, PM25] Data not available.
19:49:55:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:639 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:639 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:659 -> [UART, PM25] Reading data...
19:49:55:660 -> [UART, PM25] Data not available.
19:49:55:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:660 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:660 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:680 -> [UART, PM25] Reading data...
19:49:55:681 -> [UART, PM25] Data not available.
19:49:55:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:681 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:681 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:701 -> [UART, PM25] Reading data...
19:49:55:702 -> [UART, PM25] Data not available.
19:49:55:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:702 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:702 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:722 -> [UART, PM25] Reading data...
19:49:55:723 -> [UART, PM25] Data not available.
19:49:55:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:723 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:723 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:743 -> [UART, PM25] Reading data...
19:49:55:744 -> [UART, PM25] Data not available.
19:49:55:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:744 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:744 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:764 -> [UART, PM25] Reading data...
19:49:55:765 -> [UART, PM25] Data not available.
19:49:55:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:765 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:765 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:785 -> [UART, PM25] Reading data...
19:49:55:786 -> [UART, PM25] Data not available.
19:49:55:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:786 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:786 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:808 -> [UART, PM25] Reading data...
19:49:55:809 -> [UART, PM25] Data not available.
19:49:55:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:809 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:809 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:827 -> [UART, PM25] Reading data...
19:49:55:827 -> [UART, PM25] Data not available.
19:49:55:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:828 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:828 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:848 -> [UART, PM25] Reading data...
19:49:55:849 -> [UART, PM25] Data not available.
19:49:55:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:849 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:849 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:870 -> [UART, PM25] Reading data...
19:49:55:870 -> [UART, PM25] Data not available.
19:49:55:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:870 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:870 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:890 -> [UART, PM25] Reading data...
19:49:55:891 -> [UART, PM25] Data not available.
19:49:55:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:891 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:891 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:911 -> [UART, PM25] Reading data...
19:49:55:912 -> [UART, PM25] Data not available.
19:49:55:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:912 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:912 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:934 -> [UART, PM25] Reading data...
19:49:55:935 -> [UART, PM25] Data not available.
19:49:55:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:935 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:935 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:953 -> [UART, PM25] Reading data...
19:49:55:953 -> [UART, PM25] Data not available.
19:49:55:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:953 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:953 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:974 -> [UART, PM25] Reading data...
19:49:55:975 -> [UART, PM25] Data not available.
19:49:55:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:975 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:975 -> [UART, PM25] Uart available, resetting event queue..
19:49:55:995 -> [UART, PM25] Reading data...
19:49:55:996 -> [UART, PM25] Data not available.
19:49:55:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:55:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:55:996 -> [UART, PM25] Uart available, clearing write errors..
19:49:55:996 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:016 -> [UART, PM25] Reading data...
19:49:56:017 -> [UART, PM25] Data not available.
19:49:56:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:017 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:017 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:037 -> [UART, PM25] Reading data...
19:49:56:038 -> [UART, PM25] Data not available.
19:49:56:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:038 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:038 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:058 -> [UART, PM25] Reading data...
19:49:56:059 -> [UART, PM25] Data not available.
19:49:56:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:059 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:059 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:079 -> [UART, PM25] Reading data...
19:49:56:080 -> [UART, PM25] Data not available.
19:49:56:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:080 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:080 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:100 -> [UART, PM25] Reading data...
19:49:56:101 -> [UART, PM25] Data not available.
19:49:56:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:101 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:101 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:121 -> [UART, PM25] Reading data...
19:49:56:122 -> [UART, PM25] Data not available.
19:49:56:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:122 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:122 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:142 -> [UART, PM25] Reading data...
19:49:56:143 -> [UART, PM25] Data not available.
19:49:56:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:143 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:143 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:163 -> [UART, PM25] Reading data...
19:49:56:164 -> [UART, PM25] Data not available.
19:49:56:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:164 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:164 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:185 -> [UART, PM25] Reading data...
19:49:56:185 -> [UART, PM25] Data not available.
19:49:56:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:185 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:185 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:205 -> [UART, PM25] Reading data...
19:49:56:206 -> [UART, PM25] Data not available.
19:49:56:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:206 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:206 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:226 -> [UART, PM25] Reading data...
19:49:56:227 -> [UART, PM25] Data not available.
19:49:56:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:227 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:227 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:247 -> [UART, PM25] Reading data...
19:49:56:248 -> [UART, PM25] Data not available.
19:49:56:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:248 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:248 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:268 -> [UART, PM25] Reading data...
19:49:56:269 -> [UART, PM25] Data not available.
19:49:56:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:269 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:269 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:289 -> [UART, PM25] Reading data...
19:49:56:290 -> [UART, PM25] Data not available.
19:49:56:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:290 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:290 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:320 -> [UART, PM25] Reading data...
19:49:56:321 -> [UART, PM25] Data not available.
19:49:56:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:321 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:321 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:331 -> [UART, PM25] Reading data...
19:49:56:332 -> [UART, PM25] Data not available.
19:49:56:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:332 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:332 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:352 -> [UART, PM25] Reading data...
19:49:56:353 -> [UART, PM25] Data not available.
19:49:56:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:353 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:353 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:373 -> [UART, PM25] Reading data...
19:49:56:374 -> [UART, PM25] Data not available.
19:49:56:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:374 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:374 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:394 -> [UART, PM25] Reading data...
19:49:56:395 -> [UART, PM25] Data not available.
19:49:56:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:395 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:395 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:415 -> [UART, PM25] Reading data...
19:49:56:416 -> [UART, PM25] Data not available.
19:49:56:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:416 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:416 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:436 -> [UART, PM25] Reading data...
19:49:56:437 -> [UART, PM25] Data not available.
19:49:56:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:437 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:437 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:457 -> [UART, PM25] Reading data...
19:49:56:458 -> [UART, PM25] Data not available.
19:49:56:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:458 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:458 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:499 -> [UART, PM25] Reading data...
19:49:56:505 -> [UART, PM25] Data not available.
19:49:56:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:505 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:505 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:505 -> [UART, PM25] Reading data...
19:49:56:505 -> [UART, PM25] Data not available.
19:49:56:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:505 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:505 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:520 -> [UART, PM25] Reading data...
19:49:56:521 -> [UART, PM25] Data not available.
19:49:56:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:521 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:521 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:541 -> [UART, PM25] Reading data...
19:49:56:542 -> [UART, PM25] Data not available.
19:49:56:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:542 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:542 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:562 -> [UART, PM25] Reading data...
19:49:56:563 -> [UART, PM25] Data not available.
19:49:56:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:563 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:563 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:583 -> [UART, PM25] Reading data...
19:49:56:584 -> [UART, PM25] Data not available.
19:49:56:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:584 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:584 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:604 -> [UART, PM25] Reading data...
19:49:56:605 -> [UART, PM25] Data not available.
19:49:56:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:605 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:605 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:625 -> [UART, PM25] Reading data...
19:49:56:626 -> [UART, PM25] Data not available.
19:49:56:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:626 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:626 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:646 -> [UART, PM25] Reading data...
19:49:56:647 -> [UART, PM25] Data not available.
19:49:56:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:647 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:647 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:667 -> [UART, PM25] Reading data...
19:49:56:668 -> [UART, PM25] Data not available.
19:49:56:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:668 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:668 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:688 -> [UART, PM25] Reading data...
19:49:56:689 -> [UART, PM25] Data not available.
19:49:56:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:689 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:689 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:709 -> [UART, PM25] Reading data...
19:49:56:710 -> [UART, PM25] Data not available.
19:49:56:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:710 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:710 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:730 -> [UART, PM25] Reading data...
19:49:56:731 -> [UART, PM25] Data not available.
19:49:56:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:731 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:731 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:751 -> [UART, PM25] Reading data...
19:49:56:752 -> [UART, PM25] Data not available.
19:49:56:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:752 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:752 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:772 -> [UART, PM25] Reading data...
19:49:56:773 -> [UART, PM25] Data not available.
19:49:56:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:773 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:773 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:793 -> [UART, PM25] Reading data...
19:49:56:794 -> [UART, PM25] Data not available.
19:49:56:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:794 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:794 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:814 -> [UART, PM25] Reading data...
19:49:56:815 -> [UART, PM25] Data not available.
19:49:56:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:815 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:815 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:845 -> [UART, PM25] Reading data...
19:49:56:845 -> [UART, PM25] Data not available.
19:49:56:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:845 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:845 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:856 -> [UART, PM25] Reading data...
19:49:56:857 -> [UART, PM25] Data not available.
19:49:56:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:857 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:857 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:877 -> [UART, PM25] Reading data...
19:49:56:878 -> [UART, PM25] Data not available.
19:49:56:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:878 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:878 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:898 -> [UART, PM25] Reading data...
19:49:56:898 -> [UART, PM25] Data not available.
19:49:56:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:899 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:899 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:919 -> [UART, PM25] Reading data...
19:49:56:920 -> [UART, PM25] Data not available.
19:49:56:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:920 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:920 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:940 -> [UART, PM25] Reading data...
19:49:56:941 -> [UART, PM25] Data not available.
19:49:56:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:941 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:941 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:961 -> [UART, PM25] Reading data...
19:49:56:962 -> [UART, PM25] Data not available.
19:49:56:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:962 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:962 -> [UART, PM25] Uart available, resetting event queue..
19:49:56:982 -> [UART, PM25] Reading data...
19:49:56:983 -> [UART, PM25] Data not available.
19:49:56:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:56:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:56:983 -> [UART, PM25] Uart available, clearing write errors..
19:49:56:983 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:003 -> [UART, PM25] Reading data...
19:49:57:004 -> [UART, PM25] Data not available.
19:49:57:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:004 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:004 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:024 -> [UART, PM25] Reading data...
19:49:57:025 -> [UART, PM25] Data not available.
19:49:57:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:025 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:025 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:045 -> [UART, PM25] Reading data...
19:49:57:046 -> [UART, PM25] Data not available.
19:49:57:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:046 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:046 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:066 -> [UART, PM25] Reading data...
19:49:57:067 -> [UART, PM25] Data not available.
19:49:57:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:067 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:067 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:088 -> [UART, PM25] Reading data...
19:49:57:088 -> [UART, PM25] Data not available.
19:49:57:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:088 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:088 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:108 -> [UART, PM25] Reading data...
19:49:57:109 -> [UART, PM25] Data not available.
19:49:57:109 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:109 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:109 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:109 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:129 -> [UART, PM25] Reading data...
19:49:57:130 -> [UART, PM25] Data not available.
19:49:57:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:130 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:130 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:150 -> [UART, PM25] Reading data...
19:49:57:151 -> [UART, PM25] Data not available.
19:49:57:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:151 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:151 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:171 -> [UART, PM25] Reading data...
19:49:57:172 -> [UART, PM25] Data not available.
19:49:57:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:172 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:172 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:192 -> [UART, PM25] Reading data...
19:49:57:193 -> [UART, PM25] Data not available.
19:49:57:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:193 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:193 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:213 -> [UART, PM25] Reading data...
19:49:57:214 -> [UART, PM25] Data not available.
19:49:57:214 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:214 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:214 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:214 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:234 -> [UART, PM25] Reading data...
19:49:57:235 -> [UART, PM25] Data not available.
19:49:57:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:235 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:235 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:255 -> [UART, PM25] Reading data...
19:49:57:256 -> [UART, PM25] Data not available.
19:49:57:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:256 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:256 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:276 -> [UART, PM25] Reading data...
19:49:57:276 -> [UART, PM25] Data not available.
19:49:57:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:276 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:276 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:297 -> [UART, PM25] Reading data...
19:49:57:298 -> [UART, PM25] Data not available.
19:49:57:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:298 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:298 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:318 -> [UART, PM25] Reading data...
19:49:57:319 -> [UART, PM25] Data not available.
19:49:57:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:319 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:319 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:339 -> [UART, PM25] Reading data...
19:49:57:340 -> [UART, PM25] Data not available.
19:49:57:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:340 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:340 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:363 -> [UART, PM25] Reading data...
19:49:57:364 -> [UART, PM25] Data not available.
19:49:57:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:364 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:364 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:381 -> [UART, PM25] Reading data...
19:49:57:382 -> [UART, PM25] Data not available.
19:49:57:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:382 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:382 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:402 -> [UART, PM25] Reading data...
19:49:57:403 -> [UART, PM25] Data not available.
19:49:57:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:403 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:403 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:423 -> [UART, PM25] Reading data...
19:49:57:424 -> [UART, PM25] Data not available.
19:49:57:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:424 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:424 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:444 -> [UART, PM25] Reading data...
19:49:57:445 -> [UART, PM25] Data not available.
19:49:57:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:445 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:445 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:465 -> [UART, PM25] Reading data...
19:49:57:466 -> [UART, PM25] Data not available.
19:49:57:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:466 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:466 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:486 -> [UART, PM25] Reading data...
19:49:57:487 -> [UART, PM25] Data not available.
19:49:57:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:487 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:487 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:507 -> [UART, PM25] Reading data...
19:49:57:508 -> [UART, PM25] Data not available.
19:49:57:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:508 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:508 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:528 -> [UART, PM25] Reading data...
19:49:57:528 -> [UART, PM25] Data not available.
19:49:57:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:529 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:529 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:549 -> [UART, PM25] Reading data...
19:49:57:550 -> [UART, PM25] Data not available.
19:49:57:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:550 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:550 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:570 -> [UART, PM25] Reading data...
19:49:57:571 -> [UART, PM25] Data not available.
19:49:57:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:571 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:571 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:591 -> [UART, PM25] Reading data...
19:49:57:592 -> [UART, PM25] Data not available.
19:49:57:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:592 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:592 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:612 -> [UART, PM25] Reading data...
19:49:57:613 -> [UART, PM25] Data not available.
19:49:57:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:613 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:613 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:633 -> [UART, PM25] Reading data...
19:49:57:634 -> [UART, PM25] Data not available.
19:49:57:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:634 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:634 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:654 -> [UART, PM25] Reading data...
19:49:57:655 -> [UART, PM25] Data not available.
19:49:57:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:655 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:655 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:675 -> [UART, PM25] Reading data...
19:49:57:676 -> [UART, PM25] Data not available.
19:49:57:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:676 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:676 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:696 -> [UART, PM25] Reading data...
19:49:57:696 -> [UART, PM25] Data not available.
19:49:57:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:697 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:697 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:717 -> [UART, PM25] Reading data...
19:49:57:718 -> [UART, PM25] Data not available.
19:49:57:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:718 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:718 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:738 -> [UART, PM25] Reading data...
19:49:57:739 -> [UART, PM25] Data not available.
19:49:57:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:739 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:739 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:759 -> [UART, PM25] Reading data...
19:49:57:759 -> [UART, PM25] Data not available.
19:49:57:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:759 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:759 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:780 -> [UART, PM25] Reading data...
19:49:57:781 -> [UART, PM25] Data not available.
19:49:57:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:781 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:781 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:801 -> [UART, PM25] Reading data...
19:49:57:802 -> [UART, PM25] Data not available.
19:49:57:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:802 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:802 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:822 -> [UART, PM25] Reading data...
19:49:57:823 -> [UART, PM25] Data not available.
19:49:57:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:823 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:823 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:843 -> [UART, PM25] Reading data...
19:49:57:844 -> [UART, PM25] Data not available.
19:49:57:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:844 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:844 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:873 -> [UART, PM25] Reading data...
19:49:57:873 -> [UART, PM25] Data not available.
19:49:57:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:873 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:873 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:885 -> [UART, PM25] Reading data...
19:49:57:885 -> [UART, PM25] Data not available.
19:49:57:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:886 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:886 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:906 -> [UART, PM25] Reading data...
19:49:57:907 -> [UART, PM25] Data not available.
19:49:57:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:907 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:907 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:927 -> [UART, PM25] Reading data...
19:49:57:928 -> [UART, PM25] Data not available.
19:49:57:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:928 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:928 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:948 -> [UART, PM25] Reading data...
19:49:57:949 -> [UART, PM25] Data not available.
19:49:57:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:949 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:949 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:969 -> [UART, PM25] Reading data...
19:49:57:970 -> [UART, PM25] Data not available.
19:49:57:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:970 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:970 -> [UART, PM25] Uart available, resetting event queue..
19:49:57:990 -> [UART, PM25] Reading data...
19:49:57:991 -> [UART, PM25] Data not available.
19:49:57:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:57:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:57:991 -> [UART, PM25] Uart available, clearing write errors..
19:49:57:991 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:011 -> [UART, PM25] Reading data...
19:49:58:011 -> [UART, PM25] Data not available.
19:49:58:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:012 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:012 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:032 -> [UART, PM25] Reading data...
19:49:58:033 -> [UART, PM25] Data not available.
19:49:58:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:033 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:033 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:053 -> [UART, PM25] Reading data...
19:49:58:054 -> [UART, PM25] Data not available.
19:49:58:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:054 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:054 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:074 -> [UART, PM25] Reading data...
19:49:58:075 -> [UART, PM25] Data not available.
19:49:58:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:075 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:075 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:096 -> [UART, PM25] Reading data...
19:49:58:096 -> [UART, PM25] Data not available.
19:49:58:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:096 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:096 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:116 -> [UART, PM25] Reading data...
19:49:58:117 -> [UART, PM25] Data not available.
19:49:58:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:117 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:117 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:137 -> [UART, PM25] Reading data...
19:49:58:137 -> [UART, PM25] Data not available.
19:49:58:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:137 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:137 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:158 -> [UART, PM25] Reading data...
19:49:58:162 -> [UART, PM25] Data not available.
19:49:58:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:162 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:162 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:179 -> [UART, PM25] Reading data...
19:49:58:180 -> [UART, PM25] Data not available.
19:49:58:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:180 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:180 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:200 -> [UART, PM25] Reading data...
19:49:58:201 -> [UART, PM25] Data not available.
19:49:58:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:201 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:201 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:221 -> [UART, PM25] Reading data...
19:49:58:222 -> [UART, PM25] Data not available.
19:49:58:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:222 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:222 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:242 -> [UART, PM25] Reading data...
19:49:58:243 -> [UART, PM25] Data not available.
19:49:58:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:243 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:243 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:263 -> [UART, PM25] Reading data...
19:49:58:264 -> [UART, PM25] Data not available.
19:49:58:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:264 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:264 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:284 -> [UART, PM25] Reading data...
19:49:58:285 -> [UART, PM25] Data not available.
19:49:58:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:285 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:285 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:305 -> [UART, PM25] Reading data...
19:49:58:306 -> [UART, PM25] Data not available.
19:49:58:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:306 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:306 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:326 -> [UART, PM25] Reading data...
19:49:58:327 -> [UART, PM25] Data not available.
19:49:58:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:327 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:327 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:347 -> [UART, PM25] Reading data...
19:49:58:348 -> [UART, PM25] Data not available.
19:49:58:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:348 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:348 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:399 -> [UART, PM25] Reading data...
19:49:58:399 -> [UART, PM25] Data not available.
19:49:58:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:399 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:399 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:399 -> [UART, PM25] Reading data...
19:49:58:399 -> [UART, PM25] Data not available.
19:49:58:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:399 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:399 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:411 -> [UART, PM25] Reading data...
19:49:58:412 -> [UART, PM25] Data not available.
19:49:58:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:412 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:412 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:431 -> [UART, PM25] Reading data...
19:49:58:432 -> [UART, PM25] Data not available.
19:49:58:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:432 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:432 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:452 -> [UART, PM25] Reading data...
19:49:58:456 -> [UART, PM25] Data not available.
19:49:58:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:456 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:456 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:473 -> [UART, PM25] Reading data...
19:49:58:474 -> [UART, PM25] Data not available.
19:49:58:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:474 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:474 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:494 -> [UART, PM25] Reading data...
19:49:58:495 -> [UART, PM25] Data not available.
19:49:58:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:495 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:495 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:515 -> [UART, PM25] Reading data...
19:49:58:516 -> [UART, PM25] Data not available.
19:49:58:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:516 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:516 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:536 -> [UART, PM25] Reading data...
19:49:58:537 -> [UART, PM25] Data not available.
19:49:58:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:537 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:537 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:557 -> [UART, PM25] Reading data...
19:49:58:558 -> [UART, PM25] Data not available.
19:49:58:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:558 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:558 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:578 -> [UART, PM25] Reading data...
19:49:58:578 -> [UART, PM25] Data not available.
19:49:58:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:579 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:579 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:599 -> [UART, PM25] Reading data...
19:49:58:600 -> [UART, PM25] Data not available.
19:49:58:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:600 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:600 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:620 -> [UART, PM25] Reading data...
19:49:58:621 -> [UART, PM25] Data not available.
19:49:58:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:621 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:621 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:641 -> [UART, PM25] Reading data...
19:49:58:642 -> [UART, PM25] Data not available.
19:49:58:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:642 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:642 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:662 -> [UART, PM25] Reading data...
19:49:58:663 -> [UART, PM25] Data not available.
19:49:58:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:663 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:663 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:683 -> [UART, PM25] Reading data...
19:49:58:684 -> [UART, PM25] Data not available.
19:49:58:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:684 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:684 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:704 -> [UART, PM25] Reading data...
19:49:58:705 -> [UART, PM25] Data not available.
19:49:58:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:705 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:705 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:725 -> [UART, PM25] Reading data...
19:49:58:726 -> [UART, PM25] Data not available.
19:49:58:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:726 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:726 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:746 -> [UART, PM25] Reading data...
19:49:58:747 -> [UART, PM25] Data not available.
19:49:58:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:747 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:747 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:767 -> [UART, PM25] Reading data...
19:49:58:767 -> [UART, PM25] Data not available.
19:49:58:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:767 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:767 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:788 -> [UART, PM25] Reading data...
19:49:58:789 -> [UART, PM25] Data not available.
19:49:58:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:789 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:789 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:809 -> [UART, PM25] Reading data...
19:49:58:810 -> [UART, PM25] Data not available.
19:49:58:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:810 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:810 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:830 -> [UART, PM25] Reading data...
19:49:58:830 -> [UART, PM25] Data not available.
19:49:58:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:830 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:830 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:851 -> [UART, PM25] Reading data...
19:49:58:852 -> [UART, PM25] Data not available.
19:49:58:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:852 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:852 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:872 -> [UART, PM25] Reading data...
19:49:58:873 -> [UART, PM25] Data not available.
19:49:58:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:873 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:873 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:893 -> [UART, PM25] Reading data...
19:49:58:894 -> [UART, PM25] Data not available.
19:49:58:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:894 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:894 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:917 -> [UART, PM25] Reading data...
19:49:58:917 -> [UART, PM25] Data not available.
19:49:58:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:917 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:917 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:935 -> [UART, PM25] Reading data...
19:49:58:936 -> [UART, PM25] Data not available.
19:49:58:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:936 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:936 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:956 -> [UART, PM25] Reading data...
19:49:58:957 -> [UART, PM25] Data not available.
19:49:58:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:957 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:957 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:977 -> [UART, PM25] Reading data...
19:49:58:978 -> [UART, PM25] Data not available.
19:49:58:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:978 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:978 -> [UART, PM25] Uart available, resetting event queue..
19:49:58:998 -> [UART, PM25] Reading data...
19:49:58:999 -> [UART, PM25] Data not available.
19:49:58:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:58:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:58:999 -> [UART, PM25] Uart available, clearing write errors..
19:49:58:999 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:019 -> [UART, PM25] Reading data...
19:49:59:020 -> [UART, PM25] Data not available.
19:49:59:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:020 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:020 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:040 -> [UART, PM25] Reading data...
19:49:59:041 -> [UART, PM25] Data not available.
19:49:59:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:041 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:041 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:061 -> [UART, PM25] Reading data...
19:49:59:062 -> [UART, PM25] Data not available.
19:49:59:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:062 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:062 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:062 -> PING!
19:49:59:275 -> [UART, PM25] Reading data...
19:49:59:275 -> [UART, PM25] Data not available.
19:49:59:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:276 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:276 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:296 -> [UART, PM25] Reading data...
19:49:59:297 -> [UART, PM25] Data not available.
19:49:59:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:297 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:297 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:317 -> [UART, PM25] Reading data...
19:49:59:318 -> [UART, PM25] Data not available.
19:49:59:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:318 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:318 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:338 -> [UART, PM25] Reading data...
19:49:59:342 -> [UART, PM25] Data not available.
19:49:59:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:342 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:342 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:359 -> [UART, PM25] Reading data...
19:49:59:360 -> [UART, PM25] Data not available.
19:49:59:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:360 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:360 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:380 -> [UART, PM25] Reading data...
19:49:59:381 -> [UART, PM25] Data not available.
19:49:59:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:381 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:381 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:402 -> [UART, PM25] Reading data...
19:49:59:402 -> [UART, PM25] Data not available.
19:49:59:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:402 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:402 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:432 -> [UART, PM25] Reading data...
19:49:59:432 -> [UART, PM25] Data not available.
19:49:59:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:432 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:432 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:464 -> [UART, PM25] Reading data...
19:49:59:464 -> [UART, PM25] Data not available.
19:49:59:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:465 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:465 -> [UART, PM25] Uart available, resetting event queue..

19:49:59:444 -> [UART, PM25] Data not available.
19:49:59:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:444 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:444 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:443 -> [UART, PM25] Reading data...19:49:59:485 -> [UART, PM25] Reading data...
19:49:59:485 -> [UART, PM25] Data not available.
19:49:59:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:485 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:485 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:506 -> [UART, PM25] Reading data...
19:49:59:507 -> [UART, PM25] Data not available.
19:49:59:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:507 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:507 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:527 -> [UART, PM25] Reading data...
19:49:59:527 -> [UART, PM25] Data not available.
19:49:59:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:527 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:527 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:548 -> [UART, PM25] Reading data...
19:49:59:549 -> [UART, PM25] Data not available.
19:49:59:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:549 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:549 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:569 -> [UART, PM25] Reading data...
19:49:59:570 -> [UART, PM25] Data not available.
19:49:59:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:570 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:570 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:590 -> [UART, PM25] Reading data...
19:49:59:590 -> [UART, PM25] Data not available.
19:49:59:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:590 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:590 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:611 -> [UART, PM25] Reading data...
19:49:59:612 -> [UART, PM25] Data not available.
19:49:59:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:612 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:612 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:632 -> [UART, PM25] Reading data...
19:49:59:632 -> [UART, PM25] Data not available.
19:49:59:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:633 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:633 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:653 -> [UART, PM25] Reading data...
19:49:59:654 -> [UART, PM25] Data not available.
19:49:59:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:654 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:654 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:674 -> [UART, PM25] Reading data...
19:49:59:675 -> [UART, PM25] Data not available.
19:49:59:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:675 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:675 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:695 -> [UART, PM25] Reading data...
19:49:59:696 -> [UART, PM25] Data not available.
19:49:59:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:696 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:696 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:716 -> [UART, PM25] Reading data...
19:49:59:716 -> [UART, PM25] Data not available.
19:49:59:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:716 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:716 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:737 -> [UART, PM25] Reading data...
19:49:59:738 -> [UART, PM25] Data not available.
19:49:59:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:738 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:738 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:758 -> [UART, PM25] Reading data...
19:49:59:759 -> [UART, PM25] Data not available.
19:49:59:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:759 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:759 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:779 -> [UART, PM25] Reading data...
19:49:59:780 -> [UART, PM25] Data not available.
19:49:59:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:780 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:780 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:800 -> [UART, PM25] Reading data...
19:49:59:801 -> [UART, PM25] Data not available.
19:49:59:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:801 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:801 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:821 -> [UART, PM25] Reading data...
19:49:59:822 -> [UART, PM25] Data not available.
19:49:59:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:822 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:822 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:842 -> [UART, PM25] Reading data...
19:49:59:842 -> [UART, PM25] Data not available.
19:49:59:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:842 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:842 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:864 -> [UART, PM25] Reading data...
19:49:59:865 -> [UART, PM25] Data not available.
19:49:59:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:865 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:865 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:884 -> [UART, PM25] Reading data...
19:49:59:885 -> [UART, PM25] Data not available.
19:49:59:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:885 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:885 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:905 -> [UART, PM25] Reading data...
19:49:59:905 -> [UART, PM25] Data not available.
19:49:59:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:905 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:905 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:926 -> [UART, PM25] Reading data...
19:49:59:927 -> [UART, PM25] Data not available.
19:49:59:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:927 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:927 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:947 -> [UART, PM25] Reading data...
19:49:59:948 -> [UART, PM25] Data not available.
19:49:59:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:948 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:948 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:968 -> [UART, PM25] Reading data...
19:49:59:969 -> [UART, PM25] Data not available.
19:49:59:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:969 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:969 -> [UART, PM25] Uart available, resetting event queue..
19:49:59:989 -> [UART, PM25] Reading data...
19:49:59:990 -> [UART, PM25] Data not available.
19:49:59:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:49:59:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:49:59:990 -> [UART, PM25] Uart available, clearing write errors..
19:49:59:990 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:010 -> [UART, PM25] Reading data...
19:50:00:010 -> [UART, PM25] Data not available.
19:50:00:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:010 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:010 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:031 -> [UART, PM25] Reading data...
19:50:00:031 -> [UART, PM25] Data not available.
19:50:00:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:031 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:031 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:052 -> [UART, PM25] Reading data...
19:50:00:053 -> [UART, PM25] Data not available.
19:50:00:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:053 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:053 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:073 -> [UART, PM25] Reading data...
19:50:00:074 -> [UART, PM25] Data not available.
19:50:00:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:074 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:074 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:094 -> [UART, PM25] Reading data...
19:50:00:094 -> [UART, PM25] Data not available.
19:50:00:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:094 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:094 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:139 -> [UART, PM25] Reading data...
19:50:00:140 -> [UART, PM25] Data not available.
19:50:00:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:140 -> [UART, PM25] Reading data...
19:50:00:140 -> [UART, PM25] Data not available.
19:50:00:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:157 -> [UART, PM25] Reading data...
19:50:00:158 -> [UART, PM25] Data not available.
19:50:00:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:158 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:158 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:178 -> [UART, PM25] Reading data...
19:50:00:179 -> [UART, PM25] Data not available.
19:50:00:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:179 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:179 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:199 -> [UART, PM25] Reading data...
19:50:00:200 -> [UART, PM25] Data not available.
19:50:00:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:200 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:200 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:220 -> [UART, PM25] Reading data...
19:50:00:221 -> [UART, PM25] Data not available.
19:50:00:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:221 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:221 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:241 -> [UART, PM25] Reading data...
19:50:00:242 -> [UART, PM25] Data not available.
19:50:00:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:242 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:242 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:262 -> [UART, PM25] Reading data...
19:50:00:263 -> [UART, PM25] Data not available.
19:50:00:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:263 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:263 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:283 -> [UART, PM25] Reading data...
19:50:00:283 -> [UART, PM25] Data not available.
19:50:00:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:284 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:284 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:304 -> [UART, PM25] Reading data...
19:50:00:305 -> [UART, PM25] Data not available.
19:50:00:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:305 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:305 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:325 -> [UART, PM25] Reading data...
19:50:00:326 -> [UART, PM25] Data not available.
19:50:00:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:326 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:326 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:346 -> [UART, PM25] Reading data...
19:50:00:347 -> [UART, PM25] Data not available.
19:50:00:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:347 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:347 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:367 -> [UART, PM25] Reading data...
19:50:00:368 -> [UART, PM25] Data not available.
19:50:00:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:368 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:368 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:388 -> [UART, PM25] Reading data...
19:50:00:389 -> [UART, PM25] Data not available.
19:50:00:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:389 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:389 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:409 -> [UART, PM25] Reading data...
19:50:00:409 -> [UART, PM25] Data not available.
19:50:00:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:409 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:409 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:430 -> [UART, PM25] Reading data...
19:50:00:430 -> [UART, PM25] Data not available.
19:50:00:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:431 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:431 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:461 -> [UART, PM25] Reading data...
19:50:00:462 -> [UART, PM25] Data not available.
19:50:00:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:472 -> [UART, PM25] Reading data...
19:50:00:473 -> [UART, PM25] Data not available.
19:50:00:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:473 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:473 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:493 -> [UART, PM25] Reading data...
19:50:00:493 -> [UART, PM25] Data not available.
19:50:00:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:493 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:493 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:514 -> [UART, PM25] Reading data...
19:50:00:518 -> [UART, PM25] Data not available.
19:50:00:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:518 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:518 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:535 -> [UART, PM25] Reading data...
19:50:00:536 -> [UART, PM25] Data not available.
19:50:00:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:536 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:536 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:556 -> [UART, PM25] Reading data...
19:50:00:556 -> [UART, PM25] Data not available.
19:50:00:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:557 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:557 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:577 -> [UART, PM25] Reading data...
19:50:00:578 -> [UART, PM25] Data not available.
19:50:00:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:578 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:578 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:598 -> [UART, PM25] Reading data...
19:50:00:599 -> [UART, PM25] Data not available.
19:50:00:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:599 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:599 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:619 -> [UART, PM25] Reading data...
19:50:00:620 -> [UART, PM25] Data not available.
19:50:00:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:620 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:620 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:640 -> [UART, PM25] Reading data...
19:50:00:641 -> [UART, PM25] Data not available.
19:50:00:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:641 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:641 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:661 -> [UART, PM25] Reading data...
19:50:00:662 -> [UART, PM25] Data not available.
19:50:00:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:662 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:662 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:682 -> [UART, PM25] Reading data...
19:50:00:683 -> [UART, PM25] Data not available.
19:50:00:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:683 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:683 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:703 -> [UART, PM25] Reading data...
19:50:00:704 -> [UART, PM25] Data not available.
19:50:00:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:704 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:704 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:724 -> [UART, PM25] Reading data...
19:50:00:725 -> [UART, PM25] Data not available.
19:50:00:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:725 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:725 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:745 -> [UART, PM25] Reading data...
19:50:00:745 -> [UART, PM25] Data not available.
19:50:00:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:745 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:745 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:766 -> [UART, PM25] Reading data...
19:50:00:767 -> [UART, PM25] Data not available.
19:50:00:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:767 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:767 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:787 -> [UART, PM25] Reading data...
19:50:00:788 -> [UART, PM25] Data not available.
19:50:00:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:788 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:788 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:808 -> [UART, PM25] Reading data...
19:50:00:809 -> [UART, PM25] Data not available.
19:50:00:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:809 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:809 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:829 -> [UART, PM25] Reading data...
19:50:00:830 -> [UART, PM25] Data not available.
19:50:00:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:830 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:830 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:850 -> [UART, PM25] Reading data...
19:50:00:851 -> [UART, PM25] Data not available.
19:50:00:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:851 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:851 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:871 -> [UART, PM25] Reading data...
19:50:00:871 -> [UART, PM25] Data not available.
19:50:00:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:871 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:871 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:892 -> [UART, PM25] Reading data...
19:50:00:893 -> [UART, PM25] Data not available.
19:50:00:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:893 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:893 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:913 -> [UART, PM25] Reading data...
19:50:00:914 -> [UART, PM25] Data not available.
19:50:00:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:914 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:914 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:934 -> [UART, PM25] Reading data...
19:50:00:935 -> [UART, PM25] Data not available.
19:50:00:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:935 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:935 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:955 -> [UART, PM25] Reading data...
19:50:00:956 -> [UART, PM25] Data not available.
19:50:00:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:956 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:956 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:978 -> [UART, PM25] Reading data...
19:50:00:978 -> [UART, PM25] Data not available.
19:50:00:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:978 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:978 -> [UART, PM25] Uart available, resetting event queue..
19:50:00:997 -> [UART, PM25] Reading data...
19:50:00:998 -> [UART, PM25] Data not available.
19:50:00:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:00:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:00:998 -> [UART, PM25] Uart available, clearing write errors..
19:50:00:998 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:018 -> [UART, PM25] Reading data...
19:50:01:019 -> [UART, PM25] Data not available.
19:50:01:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:019 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:019 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:039 -> [UART, PM25] Reading data...
19:50:01:040 -> [UART, PM25] Data not available.
19:50:01:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:040 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:040 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:060 -> [UART, PM25] Reading data...
19:50:01:061 -> [UART, PM25] Data not available.
19:50:01:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:061 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:061 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:081 -> [UART, PM25] Reading data...
19:50:01:081 -> [UART, PM25] Data not available.
19:50:01:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:082 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:082 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:103 -> [UART, PM25] Reading data...
19:50:01:104 -> [UART, PM25] Data not available.
19:50:01:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:104 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:104 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:123 -> [UART, PM25] Reading data...
19:50:01:123 -> [UART, PM25] Data not available.
19:50:01:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:124 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:124 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:144 -> [UART, PM25] Reading data...
19:50:01:145 -> [UART, PM25] Data not available.
19:50:01:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:145 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:145 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:165 -> [UART, PM25] Reading data...
19:50:01:166 -> [UART, PM25] Data not available.
19:50:01:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:166 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:166 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:186 -> [UART, PM25] Reading data...
19:50:01:186 -> [UART, PM25] Data not available.
19:50:01:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:186 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:186 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:207 -> [UART, PM25] Reading data...
19:50:01:208 -> [UART, PM25] Data not available.
19:50:01:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:208 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:208 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:228 -> [UART, PM25] Reading data...
19:50:01:229 -> [UART, PM25] Data not available.
19:50:01:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:229 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:229 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:249 -> [UART, PM25] Reading data...
19:50:01:250 -> [UART, PM25] Data not available.
19:50:01:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:250 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:250 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:270 -> [UART, PM25] Reading data...
19:50:01:270 -> [UART, PM25] Data not available.
19:50:01:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:271 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:271 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:291 -> [UART, PM25] Reading data...
19:50:01:292 -> [UART, PM25] Data not available.
19:50:01:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:292 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:292 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:312 -> [UART, PM25] Reading data...
19:50:01:313 -> [UART, PM25] Data not available.
19:50:01:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:313 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:313 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:333 -> [UART, PM25] Reading data...
19:50:01:334 -> [UART, PM25] Data not available.
19:50:01:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:334 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:334 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:354 -> [UART, PM25] Reading data...
19:50:01:354 -> [UART, PM25] Data not available.
19:50:01:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:354 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:354 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:375 -> [UART, PM25] Reading data...
19:50:01:375 -> [UART, PM25] Data not available.
19:50:01:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:375 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:375 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:396 -> [UART, PM25] Reading data...
19:50:01:397 -> [UART, PM25] Data not available.
19:50:01:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:397 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:397 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:417 -> [UART, PM25] Reading data...
19:50:01:418 -> [UART, PM25] Data not available.
19:50:01:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:418 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:418 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:438 -> [UART, PM25] Reading data...
19:50:01:439 -> [UART, PM25] Data not available.
19:50:01:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:439 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:439 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:459 -> [UART, PM25] Reading data...
19:50:01:460 -> [UART, PM25] Data not available.
19:50:01:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:460 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:460 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:490 -> [UART, PM25] Reading data...
19:50:01:491 -> [UART, PM25] Data not available.
19:50:01:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:491 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:491 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:501 -> [UART, PM25] Reading data...
19:50:01:502 -> [UART, PM25] Data not available.
19:50:01:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:502 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:502 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:522 -> [UART, PM25] Reading data...
19:50:01:523 -> [UART, PM25] Data not available.
19:50:01:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:523 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:523 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:543 -> [UART, PM25] Reading data...
19:50:01:544 -> [UART, PM25] Data not available.
19:50:01:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:544 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:544 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:564 -> [UART, PM25] Reading data...
19:50:01:564 -> [UART, PM25] Data not available.
19:50:01:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:565 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:565 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:585 -> [UART, PM25] Reading data...
19:50:01:586 -> [UART, PM25] Data not available.
19:50:01:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:586 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:586 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:606 -> [UART, PM25] Reading data...
19:50:01:607 -> [UART, PM25] Data not available.
19:50:01:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:607 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:607 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:627 -> [UART, PM25] Reading data...
19:50:01:628 -> [UART, PM25] Data not available.
19:50:01:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:628 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:628 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:648 -> [UART, PM25] Reading data...
19:50:01:649 -> [UART, PM25] Data not available.
19:50:01:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:649 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:649 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:669 -> [UART, PM25] Reading data...
19:50:01:670 -> [UART, PM25] Data not available.
19:50:01:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:670 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:670 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:690 -> [UART, PM25] Reading data...
19:50:01:691 -> [UART, PM25] Data not available.
19:50:01:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:691 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:691 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:711 -> [UART, PM25] Reading data...
19:50:01:712 -> [UART, PM25] Data not available.
19:50:01:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:712 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:712 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:732 -> [UART, PM25] Reading data...
19:50:01:733 -> [UART, PM25] Data not available.
19:50:01:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:733 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:733 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:753 -> [UART, PM25] Reading data...
19:50:01:754 -> [UART, PM25] Data not available.
19:50:01:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:754 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:754 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:774 -> [UART, PM25] Reading data...
19:50:01:775 -> [UART, PM25] Data not available.
19:50:01:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:775 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:775 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:795 -> [UART, PM25] Reading data...
19:50:01:796 -> [UART, PM25] Data not available.
19:50:01:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:796 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:796 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:816 -> [UART, PM25] Reading data...
19:50:01:817 -> [UART, PM25] Data not available.
19:50:01:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:817 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:817 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:849 -> [UART, PM25] Reading data...
19:50:01:875 -> [UART, PM25] Data not available.
19:50:01:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:875 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:875 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:875 -> [UART, PM25] Reading data...
19:50:01:875 -> [UART, PM25] Data not available.
19:50:01:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:875 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:875 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:879 -> [UART, PM25] Reading data...
19:50:01:879 -> [UART, PM25] Data not available.
19:50:01:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:880 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:880 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:900 -> [UART, PM25] Reading data...
19:50:01:901 -> [UART, PM25] Data not available.
19:50:01:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:901 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:901 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:921 -> [UART, PM25] Reading data...
19:50:01:922 -> [UART, PM25] Data not available.
19:50:01:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:922 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:922 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:942 -> [UART, PM25] Reading data...
19:50:01:942 -> [UART, PM25] Data not available.
19:50:01:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:942 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:942 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:963 -> [UART, PM25] Reading data...
19:50:01:964 -> [UART, PM25] Data not available.
19:50:01:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:964 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:964 -> [UART, PM25] Uart available, resetting event queue..
19:50:01:984 -> [UART, PM25] Reading data...
19:50:01:984 -> [UART, PM25] Data not available.
19:50:01:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:01:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:01:984 -> [UART, PM25] Uart available, clearing write errors..
19:50:01:984 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:012 -> [UART, PM25] Reading data...
19:50:02:013 -> [UART, PM25] Data not available.
19:50:02:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:013 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:013 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:026 -> [UART, PM25] Reading data...
19:50:02:027 -> [UART, PM25] Data not available.
19:50:02:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:027 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:027 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:047 -> [UART, PM25] Reading data...
19:50:02:048 -> [UART, PM25] Data not available.
19:50:02:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:048 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:048 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:068 -> [UART, PM25] Reading data...
19:50:02:069 -> [UART, PM25] Data not available.
19:50:02:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:069 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:069 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:089 -> [UART, PM25] Reading data...
19:50:02:090 -> [UART, PM25] Data not available.
19:50:02:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:090 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:090 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:110 -> [UART, PM25] Reading data...
19:50:02:111 -> [UART, PM25] Data not available.
19:50:02:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:111 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:111 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:131 -> [UART, PM25] Reading data...
19:50:02:132 -> [UART, PM25] Data not available.
19:50:02:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:132 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:132 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:152 -> [UART, PM25] Reading data...
19:50:02:153 -> [UART, PM25] Data not available.
19:50:02:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:153 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:153 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:173 -> [UART, PM25] Reading data...
19:50:02:174 -> [UART, PM25] Data not available.
19:50:02:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:174 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:174 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:194 -> [UART, PM25] Reading data...
19:50:02:195 -> [UART, PM25] Data not available.
19:50:02:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:195 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:195 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:215 -> [UART, PM25] Reading data...
19:50:02:216 -> [UART, PM25] Data not available.
19:50:02:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:216 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:216 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:236 -> [UART, PM25] Reading data...
19:50:02:236 -> [UART, PM25] Data not available.
19:50:02:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:236 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:236 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:257 -> [UART, PM25] Reading data...
19:50:02:258 -> [UART, PM25] Data not available.
19:50:02:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:258 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:258 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:278 -> [UART, PM25] Reading data...
19:50:02:279 -> [UART, PM25] Data not available.
19:50:02:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:279 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:279 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:302 -> [UART, PM25] Reading data...
19:50:02:302 -> [UART, PM25] Data not available.
19:50:02:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:320 -> [UART, PM25] Reading data...
19:50:02:321 -> [UART, PM25] Data not available.
19:50:02:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:321 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:321 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:341 -> [UART, PM25] Reading data...
19:50:02:341 -> [UART, PM25] Data not available.
19:50:02:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:341 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:341 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:362 -> [UART, PM25] Reading data...
19:50:02:363 -> [UART, PM25] Data not available.
19:50:02:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:363 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:363 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:386 -> [UART, PM25] Reading data...
19:50:02:387 -> [UART, PM25] Data not available.
19:50:02:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:387 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:387 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:404 -> [UART, PM25] Reading data...
19:50:02:405 -> [UART, PM25] Data not available.
19:50:02:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:405 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:405 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:425 -> [UART, PM25] Reading data...
19:50:02:426 -> [UART, PM25] Data not available.
19:50:02:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:426 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:426 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:446 -> [UART, PM25] Reading data...
19:50:02:446 -> [UART, PM25] Data not available.
19:50:02:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:446 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:446 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:467 -> [UART, PM25] Reading data...
19:50:02:468 -> [UART, PM25] Data not available.
19:50:02:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:468 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:468 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:488 -> [UART, PM25] Reading data...
19:50:02:489 -> [UART, PM25] Data not available.
19:50:02:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:489 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:489 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:509 -> [UART, PM25] Reading data...
19:50:02:510 -> [UART, PM25] Data not available.
19:50:02:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:510 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:510 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:530 -> [UART, PM25] Reading data...
19:50:02:531 -> [UART, PM25] Data not available.
19:50:02:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:531 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:531 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:551 -> [UART, PM25] Reading data...
19:50:02:552 -> [UART, PM25] Data not available.
19:50:02:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:552 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:552 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:572 -> [UART, PM25] Reading data...
19:50:02:573 -> [UART, PM25] Data not available.
19:50:02:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:573 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:573 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:593 -> [UART, PM25] Reading data...
19:50:02:594 -> [UART, PM25] Data not available.
19:50:02:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:594 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:594 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:614 -> [UART, PM25] Reading data...
19:50:02:615 -> [UART, PM25] Data not available.
19:50:02:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:615 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:615 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:636 -> [UART, PM25] Reading data...
19:50:02:636 -> [UART, PM25] Data not available.
19:50:02:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:636 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:636 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:658 -> [UART, PM25] Reading data...
19:50:02:659 -> [UART, PM25] Data not available.
19:50:02:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:659 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:659 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:677 -> [UART, PM25] Reading data...
19:50:02:678 -> [UART, PM25] Data not available.
19:50:02:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:678 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:678 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:698 -> [UART, PM25] Reading data...
19:50:02:699 -> [UART, PM25] Data not available.
19:50:02:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:699 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:699 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:719 -> [UART, PM25] Reading data...
19:50:02:720 -> [UART, PM25] Data not available.
19:50:02:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:720 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:720 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:740 -> [UART, PM25] Reading data...
19:50:02:741 -> [UART, PM25] Data not available.
19:50:02:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:741 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:741 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:761 -> [UART, PM25] Reading data...
19:50:02:762 -> [UART, PM25] Data not available.
19:50:02:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:762 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:762 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:782 -> [UART, PM25] Reading data...
19:50:02:783 -> [UART, PM25] Data not available.
19:50:02:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:783 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:783 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:803 -> [UART, PM25] Reading data...
19:50:02:804 -> [UART, PM25] Data not available.
19:50:02:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:804 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:804 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:824 -> [UART, PM25] Reading data...
19:50:02:825 -> [UART, PM25] Data not available.
19:50:02:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:825 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:825 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:845 -> [UART, PM25] Reading data...
19:50:02:846 -> [UART, PM25] Data not available.
19:50:02:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:846 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:846 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:866 -> [UART, PM25] Reading data...
19:50:02:867 -> [UART, PM25] Data not available.
19:50:02:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:867 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:867 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:887 -> [UART, PM25] Reading data...
19:50:02:888 -> [UART, PM25] Data not available.
19:50:02:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:888 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:888 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:908 -> [UART, PM25] Reading data...
19:50:02:909 -> [UART, PM25] Data not available.
19:50:02:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:909 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:909 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:930 -> [UART, PM25] Reading data...
19:50:02:931 -> [UART, PM25] Data not available.
19:50:02:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:931 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:931 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:950 -> [UART, PM25] Reading data...
19:50:02:951 -> [UART, PM25] Data not available.
19:50:02:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:951 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:951 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:971 -> [UART, PM25] Reading data...
19:50:02:972 -> [UART, PM25] Data not available.
19:50:02:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:972 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:972 -> [UART, PM25] Uart available, resetting event queue..
19:50:02:992 -> [UART, PM25] Reading data...
19:50:02:993 -> [UART, PM25] Data not available.
19:50:02:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:02:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:02:993 -> [UART, PM25] Uart available, clearing write errors..
19:50:02:993 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:016 -> [UART, PM25] Reading data...
19:50:03:017 -> [UART, PM25] Data not available.
19:50:03:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:017 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:017 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:044 -> [UART, PM25] Reading data...
19:50:03:045 -> [UART, PM25] Data not available.
19:50:03:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:045 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:045 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:055 -> [UART, PM25] Reading data...
19:50:03:055 -> [UART, PM25] Data not available.
19:50:03:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:055 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:055 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:076 -> [UART, PM25] Reading data...
19:50:03:077 -> [UART, PM25] Data not available.
19:50:03:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:077 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:077 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:097 -> [UART, PM25] Reading data...
19:50:03:098 -> [UART, PM25] Data not available.
19:50:03:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:098 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:098 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:118 -> [UART, PM25] Reading data...
19:50:03:118 -> [UART, PM25] Data not available.
19:50:03:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:118 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:118 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:139 -> [UART, PM25] Reading data...
19:50:03:140 -> [UART, PM25] Data not available.
19:50:03:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:160 -> [UART, PM25] Reading data...
19:50:03:161 -> [UART, PM25] Data not available.
19:50:03:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:161 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:161 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:181 -> [UART, PM25] Reading data...
19:50:03:181 -> [UART, PM25] Data not available.
19:50:03:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:181 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:181 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:202 -> [UART, PM25] Reading data...
19:50:03:203 -> [UART, PM25] Data not available.
19:50:03:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:203 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:203 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:223 -> [UART, PM25] Reading data...
19:50:03:224 -> [UART, PM25] Data not available.
19:50:03:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:224 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:224 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:244 -> [UART, PM25] Reading data...
19:50:03:244 -> [UART, PM25] Data not available.
19:50:03:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:245 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:245 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:265 -> [UART, PM25] Reading data...
19:50:03:265 -> [UART, PM25] Data not available.
19:50:03:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:266 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:266 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:286 -> [UART, PM25] Reading data...
19:50:03:287 -> [UART, PM25] Data not available.
19:50:03:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:287 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:287 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:307 -> [UART, PM25] Reading data...
19:50:03:308 -> [UART, PM25] Data not available.
19:50:03:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:308 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:308 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:328 -> [UART, PM25] Reading data...
19:50:03:329 -> [UART, PM25] Data not available.
19:50:03:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:329 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:329 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:349 -> [UART, PM25] Reading data...
19:50:03:350 -> [UART, PM25] Data not available.
19:50:03:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:350 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:350 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:370 -> [UART, PM25] Reading data...
19:50:03:371 -> [UART, PM25] Data not available.
19:50:03:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:371 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:371 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:391 -> [UART, PM25] Reading data...
19:50:03:392 -> [UART, PM25] Data not available.
19:50:03:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:392 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:392 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:412 -> [UART, PM25] Reading data...
19:50:03:413 -> [UART, PM25] Data not available.
19:50:03:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:413 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:413 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:433 -> [UART, PM25] Reading data...
19:50:03:434 -> [UART, PM25] Data not available.
19:50:03:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:434 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:434 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:454 -> [UART, PM25] Reading data...
19:50:03:455 -> [UART, PM25] Data not available.
19:50:03:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:455 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:455 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:475 -> [UART, PM25] Reading data...
19:50:03:476 -> [UART, PM25] Data not available.
19:50:03:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:476 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:476 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:496 -> [UART, PM25] Reading data...
19:50:03:496 -> [UART, PM25] Data not available.
19:50:03:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:517 -> [UART, PM25] Reading data...
19:50:03:518 -> [UART, PM25] Data not available.
19:50:03:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:518 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:518 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:538 -> [UART, PM25] Reading data...
19:50:03:539 -> [UART, PM25] Data not available.
19:50:03:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:539 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:539 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:587 -> [UART, PM25] Reading data...
19:50:03:587 -> [UART, PM25] Data not available.
19:50:03:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:587 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:587 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:587 -> [UART, PM25] Reading data...
19:50:03:587 -> [UART, PM25] Data not available.
19:50:03:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:587 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:587 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:601 -> [UART, PM25] Reading data...
19:50:03:601 -> [UART, PM25] Data not available.
19:50:03:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:622 -> [UART, PM25] Reading data...
19:50:03:623 -> [UART, PM25] Data not available.
19:50:03:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:623 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:623 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:643 -> [UART, PM25] Reading data...
19:50:03:643 -> [UART, PM25] Data not available.
19:50:03:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:643 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:643 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:664 -> [UART, PM25] Reading data...
19:50:03:665 -> [UART, PM25] Data not available.
19:50:03:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:665 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:665 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:685 -> [UART, PM25] Reading data...
19:50:03:685 -> [UART, PM25] Data not available.
19:50:03:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:686 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:686 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:706 -> [UART, PM25] Reading data...
19:50:03:707 -> [UART, PM25] Data not available.
19:50:03:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:707 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:707 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:727 -> [UART, PM25] Reading data...
19:50:03:728 -> [UART, PM25] Data not available.
19:50:03:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:728 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:728 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:748 -> [UART, PM25] Reading data...
19:50:03:748 -> [UART, PM25] Data not available.
19:50:03:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:749 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:749 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:769 -> [UART, PM25] Reading data...
19:50:03:770 -> [UART, PM25] Data not available.
19:50:03:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:770 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:770 -> [UART, PM25] Uart available, resetting event queue..
19:50:03:770 -> PING!
19:50:03:983 -> [UART, PM25] Reading data...
19:50:03:984 -> [UART, PM25] Data not available.
19:50:03:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:03:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:03:984 -> [UART, PM25] Uart available, clearing write errors..
19:50:03:984 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:004 -> [UART, PM25] Reading data...
19:50:04:005 -> [UART, PM25] Data not available.
19:50:04:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:005 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:005 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:025 -> [UART, PM25] Reading data...
19:50:04:026 -> [UART, PM25] Data not available.
19:50:04:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:026 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:026 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:046 -> [UART, PM25] Reading data...
19:50:04:046 -> [UART, PM25] Data not available.
19:50:04:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:047 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:047 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:067 -> [UART, PM25] Reading data...
19:50:04:068 -> [UART, PM25] Data not available.
19:50:04:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:068 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:068 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:100 -> [UART, PM25] Reading data...
19:50:04:101 -> [UART, PM25] Data not available.
19:50:04:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:101 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:101 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:109 -> [UART, PM25] Reading data...
19:50:04:110 -> [UART, PM25] Data not available.
19:50:04:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:110 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:110 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:130 -> [UART, PM25] Reading data...
19:50:04:130 -> [UART, PM25] Data not available.
19:50:04:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:130 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:130 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:151 -> [UART, PM25] Reading data...
19:50:04:152 -> [UART, PM25] Data not available.
19:50:04:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:152 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:152 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:173 -> [UART, PM25] Reading data...
19:50:04:174 -> [UART, PM25] Data not available.
19:50:04:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:174 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:174 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:193 -> [UART, PM25] Reading data...
19:50:04:194 -> [UART, PM25] Data not available.
19:50:04:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:194 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:194 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:214 -> [UART, PM25] Reading data...
19:50:04:215 -> [UART, PM25] Data not available.
19:50:04:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:215 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:215 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:235 -> [UART, PM25] Reading data...
19:50:04:236 -> [UART, PM25] Data not available.
19:50:04:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:236 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:236 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:256 -> [UART, PM25] Reading data...
19:50:04:257 -> [UART, PM25] Data not available.
19:50:04:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:257 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:257 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:277 -> [UART, PM25] Reading data...
19:50:04:277 -> [UART, PM25] Data not available.
19:50:04:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:278 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:278 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:298 -> [UART, PM25] Reading data...
19:50:04:299 -> [UART, PM25] Data not available.
19:50:04:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:299 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:299 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:319 -> [UART, PM25] Reading data...
19:50:04:320 -> [UART, PM25] Data not available.
19:50:04:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:320 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:320 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:340 -> [UART, PM25] Reading data...
19:50:04:341 -> [UART, PM25] Data not available.
19:50:04:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:341 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:341 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:361 -> [UART, PM25] Reading data...
19:50:04:362 -> [UART, PM25] Data not available.
19:50:04:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:362 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:362 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:382 -> [UART, PM25] Reading data...
19:50:04:383 -> [UART, PM25] Data not available.
19:50:04:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:383 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:383 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:403 -> [UART, PM25] Reading data...
19:50:04:403 -> [UART, PM25] Data not available.
19:50:04:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:404 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:404 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:424 -> [UART, PM25] Reading data...
19:50:04:425 -> [UART, PM25] Data not available.
19:50:04:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:425 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:425 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:445 -> [UART, PM25] Reading data...
19:50:04:446 -> [UART, PM25] Data not available.
19:50:04:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:446 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:446 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:466 -> [UART, PM25] Reading data...
19:50:04:467 -> [UART, PM25] Data not available.
19:50:04:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:467 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:467 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:487 -> [UART, PM25] Reading data...
19:50:04:488 -> [UART, PM25] Data not available.
19:50:04:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:488 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:488 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:508 -> [UART, PM25] Reading data...
19:50:04:509 -> [UART, PM25] Data not available.
19:50:04:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:509 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:509 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:529 -> [UART, PM25] Reading data...
19:50:04:530 -> [UART, PM25] Data not available.
19:50:04:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:530 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:530 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:550 -> [UART, PM25] Reading data...
19:50:04:551 -> [UART, PM25] Data not available.
19:50:04:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:551 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:551 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:571 -> [UART, PM25] Reading data...
19:50:04:572 -> [UART, PM25] Data not available.
19:50:04:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:572 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:572 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:592 -> [UART, PM25] Reading data...
19:50:04:592 -> [UART, PM25] Data not available.
19:50:04:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:592 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:592 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:616 -> [UART, PM25] Reading data...
19:50:04:617 -> [UART, PM25] Data not available.
19:50:04:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:637 -> [UART, PM25] Reading data...
19:50:04:637 -> [UART, PM25] Data not available.
19:50:04:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:655 -> [UART, PM25] Reading data...
19:50:04:655 -> [UART, PM25] Data not available.
19:50:04:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:655 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:655 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:676 -> [UART, PM25] Reading data...
19:50:04:677 -> [UART, PM25] Data not available.
19:50:04:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:677 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:677 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:697 -> [UART, PM25] Reading data...
19:50:04:698 -> [UART, PM25] Data not available.
19:50:04:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:698 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:698 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:718 -> [UART, PM25] Reading data...
19:50:04:718 -> [UART, PM25] Data not available.
19:50:04:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:719 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:719 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:739 -> [UART, PM25] Reading data...
19:50:04:740 -> [UART, PM25] Data not available.
19:50:04:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:740 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:740 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:760 -> [UART, PM25] Reading data...
19:50:04:761 -> [UART, PM25] Data not available.
19:50:04:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:761 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:761 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:781 -> [UART, PM25] Reading data...
19:50:04:782 -> [UART, PM25] Data not available.
19:50:04:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:782 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:782 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:802 -> [UART, PM25] Reading data...
19:50:04:803 -> [UART, PM25] Data not available.
19:50:04:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:803 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:803 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:823 -> [UART, PM25] Reading data...
19:50:04:824 -> [UART, PM25] Data not available.
19:50:04:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:824 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:824 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:844 -> [UART, PM25] Reading data...
19:50:04:845 -> [UART, PM25] Data not available.
19:50:04:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:845 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:845 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:865 -> [UART, PM25] Reading data...
19:50:04:866 -> [UART, PM25] Data not available.
19:50:04:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:866 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:866 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:886 -> [UART, PM25] Reading data...
19:50:04:887 -> [UART, PM25] Data not available.
19:50:04:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:887 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:887 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:907 -> [UART, PM25] Reading data...
19:50:04:907 -> [UART, PM25] Data not available.
19:50:04:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:907 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:907 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:928 -> [UART, PM25] Reading data...
19:50:04:928 -> [UART, PM25] Data not available.
19:50:04:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:928 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:928 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:949 -> [UART, PM25] Reading data...
19:50:04:950 -> [UART, PM25] Data not available.
19:50:04:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:950 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:950 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:970 -> [UART, PM25] Reading data...
19:50:04:970 -> [UART, PM25] Data not available.
19:50:04:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:970 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:970 -> [UART, PM25] Uart available, resetting event queue..
19:50:04:991 -> [UART, PM25] Reading data...
19:50:04:992 -> [UART, PM25] Data not available.
19:50:04:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:04:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:04:992 -> [UART, PM25] Uart available, clearing write errors..
19:50:04:992 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:012 -> [UART, PM25] Reading data...
19:50:05:013 -> [UART, PM25] Data not available.
19:50:05:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:013 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:013 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:033 -> [UART, PM25] Reading data...
19:50:05:033 -> [UART, PM25] Data not available.
19:50:05:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:034 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:034 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:054 -> [UART, PM25] Reading data...
19:50:05:055 -> [UART, PM25] Data not available.
19:50:05:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:055 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:055 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:075 -> [UART, PM25] Reading data...
19:50:05:076 -> [UART, PM25] Data not available.
19:50:05:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:076 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:076 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:096 -> [UART, PM25] Reading data...
19:50:05:097 -> [UART, PM25] Data not available.
19:50:05:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:097 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:097 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:128 -> [UART, PM25] Reading data...
19:50:05:128 -> [UART, PM25] Data not available.
19:50:05:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:128 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:128 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:138 -> [UART, PM25] Reading data...
19:50:05:139 -> [UART, PM25] Data not available.
19:50:05:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:139 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:139 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:159 -> [UART, PM25] Reading data...
19:50:05:159 -> [UART, PM25] Data not available.
19:50:05:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:159 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:159 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:180 -> [UART, PM25] Reading data...
19:50:05:180 -> [UART, PM25] Data not available.
19:50:05:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:180 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:180 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:201 -> [UART, PM25] Reading data...
19:50:05:202 -> [UART, PM25] Data not available.
19:50:05:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:222 -> [UART, PM25] Reading data...
19:50:05:222 -> [UART, PM25] Data not available.
19:50:05:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:243 -> [UART, PM25] Reading data...
19:50:05:244 -> [UART, PM25] Data not available.
19:50:05:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:244 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:244 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:264 -> [UART, PM25] Reading data...
19:50:05:265 -> [UART, PM25] Data not available.
19:50:05:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:265 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:265 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:285 -> [UART, PM25] Reading data...
19:50:05:285 -> [UART, PM25] Data not available.
19:50:05:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:285 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:285 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:306 -> [UART, PM25] Reading data...
19:50:05:307 -> [UART, PM25] Data not available.
19:50:05:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:307 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:307 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:327 -> [UART, PM25] Reading data...
19:50:05:328 -> [UART, PM25] Data not available.
19:50:05:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:328 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:328 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:348 -> [UART, PM25] Reading data...
19:50:05:348 -> [UART, PM25] Data not available.
19:50:05:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:348 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:348 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:372 -> [UART, PM25] Reading data...
19:50:05:372 -> [UART, PM25] Data not available.
19:50:05:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:372 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:372 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:390 -> [UART, PM25] Reading data...
19:50:05:391 -> [UART, PM25] Data not available.
19:50:05:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:391 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:391 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:427 -> [UART, PM25] Reading data...
19:50:05:440 -> [UART, PM25] Data not available.
19:50:05:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:440 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:440 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:440 -> [UART, PM25] Reading data...
19:50:05:440 -> [UART, PM25] Data not available.
19:50:05:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:440 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:440 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:453 -> [UART, PM25] Reading data...
19:50:05:453 -> [UART, PM25] Data not available.
19:50:05:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:453 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:453 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:474 -> [UART, PM25] Reading data...
19:50:05:475 -> [UART, PM25] Data not available.
19:50:05:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:475 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:475 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:495 -> [UART, PM25] Reading data...
19:50:05:496 -> [UART, PM25] Data not available.
19:50:05:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:516 -> [UART, PM25] Reading data...
19:50:05:517 -> [UART, PM25] Data not available.
19:50:05:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:517 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:517 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:537 -> [UART, PM25] Reading data...
19:50:05:538 -> [UART, PM25] Data not available.
19:50:05:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:538 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:538 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:558 -> [UART, PM25] Reading data...
19:50:05:558 -> [UART, PM25] Data not available.
19:50:05:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:558 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:558 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:579 -> [UART, PM25] Reading data...
19:50:05:580 -> [UART, PM25] Data not available.
19:50:05:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:580 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:580 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:600 -> [UART, PM25] Reading data...
19:50:05:601 -> [UART, PM25] Data not available.
19:50:05:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:622 -> [UART, PM25] Reading data...
19:50:05:622 -> [UART, PM25] Data not available.
19:50:05:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:622 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:622 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:649 -> [UART, PM25] Reading data...
19:50:05:649 -> [UART, PM25] Data not available.
19:50:05:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:649 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:649 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:663 -> [UART, PM25] Reading data...
19:50:05:664 -> [UART, PM25] Data not available.
19:50:05:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:664 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:664 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:684 -> [UART, PM25] Reading data...
19:50:05:685 -> [UART, PM25] Data not available.
19:50:05:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:705 -> [UART, PM25] Reading data...
19:50:05:706 -> [UART, PM25] Data not available.
19:50:05:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:706 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:706 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:726 -> [UART, PM25] Reading data...
19:50:05:727 -> [UART, PM25] Data not available.
19:50:05:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:727 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:727 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:747 -> [UART, PM25] Reading data...
19:50:05:747 -> [UART, PM25] Data not available.
19:50:05:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:747 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:747 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:768 -> [UART, PM25] Reading data...
19:50:05:769 -> [UART, PM25] Data not available.
19:50:05:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:769 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:769 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:789 -> [UART, PM25] Reading data...
19:50:05:790 -> [UART, PM25] Data not available.
19:50:05:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:790 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:790 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:810 -> [UART, PM25] Reading data...
19:50:05:811 -> [UART, PM25] Data not available.
19:50:05:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:811 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:811 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:831 -> [UART, PM25] Reading data...
19:50:05:832 -> [UART, PM25] Data not available.
19:50:05:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:832 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:832 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:852 -> [UART, PM25] Reading data...
19:50:05:853 -> [UART, PM25] Data not available.
19:50:05:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:853 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:853 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:873 -> [UART, PM25] Reading data...
19:50:05:874 -> [UART, PM25] Data not available.
19:50:05:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:874 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:874 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:894 -> [UART, PM25] Reading data...
19:50:05:895 -> [UART, PM25] Data not available.
19:50:05:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:895 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:895 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:915 -> [UART, PM25] Reading data...
19:50:05:916 -> [UART, PM25] Data not available.
19:50:05:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:916 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:916 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:936 -> [UART, PM25] Reading data...
19:50:05:937 -> [UART, PM25] Data not available.
19:50:05:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:937 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:937 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:957 -> [UART, PM25] Reading data...
19:50:05:958 -> [UART, PM25] Data not available.
19:50:05:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:958 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:958 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:978 -> [UART, PM25] Reading data...
19:50:05:979 -> [UART, PM25] Data not available.
19:50:05:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:05:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:05:979 -> [UART, PM25] Uart available, clearing write errors..
19:50:05:979 -> [UART, PM25] Uart available, resetting event queue..
19:50:05:999 -> [UART, PM25] Reading data...
19:50:06:000 -> [UART, PM25] Data not available.
19:50:06:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:000 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:000 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:020 -> [UART, PM25] Reading data...
19:50:06:021 -> [UART, PM25] Data not available.
19:50:06:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:021 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:021 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:041 -> [UART, PM25] Reading data...
19:50:06:042 -> [UART, PM25] Data not available.
19:50:06:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:042 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:042 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:062 -> [UART, PM25] Reading data...
19:50:06:063 -> [UART, PM25] Data not available.
19:50:06:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:063 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:063 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:083 -> [UART, PM25] Reading data...
19:50:06:084 -> [UART, PM25] Data not available.
19:50:06:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:084 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:084 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:104 -> [UART, PM25] Reading data...
19:50:06:105 -> [UART, PM25] Data not available.
19:50:06:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:105 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:105 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:125 -> [UART, PM25] Reading data...
19:50:06:126 -> [UART, PM25] Data not available.
19:50:06:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:126 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:126 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:146 -> [UART, PM25] Reading data...
19:50:06:147 -> [UART, PM25] Data not available.
19:50:06:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:147 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:147 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:167 -> [UART, PM25] Reading data...
19:50:06:168 -> [UART, PM25] Data not available.
19:50:06:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:168 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:168 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:188 -> [UART, PM25] Reading data...
19:50:06:189 -> [UART, PM25] Data not available.
19:50:06:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:189 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:189 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:209 -> [UART, PM25] Reading data...
19:50:06:209 -> [UART, PM25] Data not available.
19:50:06:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:210 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:210 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:230 -> [UART, PM25] Reading data...
19:50:06:231 -> [UART, PM25] Data not available.
19:50:06:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:231 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:231 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:252 -> [UART, PM25] Reading data...
19:50:06:252 -> [UART, PM25] Data not available.
19:50:06:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:272 -> [UART, PM25] Reading data...
19:50:06:273 -> [UART, PM25] Data not available.
19:50:06:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:293 -> [UART, PM25] Reading data...
19:50:06:294 -> [UART, PM25] Data not available.
19:50:06:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:314 -> [UART, PM25] Reading data...
19:50:06:315 -> [UART, PM25] Data not available.
19:50:06:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:315 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:315 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:335 -> [UART, PM25] Reading data...
19:50:06:336 -> [UART, PM25] Data not available.
19:50:06:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:336 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:336 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:356 -> [UART, PM25] Reading data...
19:50:06:357 -> [UART, PM25] Data not available.
19:50:06:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:357 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:357 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:377 -> [UART, PM25] Reading data...
19:50:06:378 -> [UART, PM25] Data not available.
19:50:06:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:378 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:378 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:398 -> [UART, PM25] Reading data...
19:50:06:399 -> [UART, PM25] Data not available.
19:50:06:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:399 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:399 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:419 -> [UART, PM25] Reading data...
19:50:06:420 -> [UART, PM25] Data not available.
19:50:06:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:420 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:420 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:440 -> [UART, PM25] Reading data...
19:50:06:440 -> [UART, PM25] Data not available.
19:50:06:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:441 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:441 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:461 -> [UART, PM25] Reading data...
19:50:06:462 -> [UART, PM25] Data not available.
19:50:06:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:482 -> [UART, PM25] Reading data...
19:50:06:483 -> [UART, PM25] Data not available.
19:50:06:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:483 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:483 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:503 -> [UART, PM25] Reading data...
19:50:06:504 -> [UART, PM25] Data not available.
19:50:06:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:504 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:504 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:524 -> [UART, PM25] Reading data...
19:50:06:525 -> [UART, PM25] Data not available.
19:50:06:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:545 -> [UART, PM25] Reading data...
19:50:06:545 -> [UART, PM25] Data not available.
19:50:06:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:545 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:545 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:566 -> [UART, PM25] Reading data...
19:50:06:567 -> [UART, PM25] Data not available.
19:50:06:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:567 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:567 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:587 -> [UART, PM25] Reading data...
19:50:06:588 -> [UART, PM25] Data not available.
19:50:06:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:588 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:588 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:608 -> [UART, PM25] Reading data...
19:50:06:609 -> [UART, PM25] Data not available.
19:50:06:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:629 -> [UART, PM25] Reading data...
19:50:06:630 -> [UART, PM25] Data not available.
19:50:06:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:650 -> [UART, PM25] Reading data...
19:50:06:651 -> [UART, PM25] Data not available.
19:50:06:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:651 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:651 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:684 -> [UART, PM25] Reading data...
19:50:06:684 -> [UART, PM25] Data not available.
19:50:06:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:684 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:684 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:692 -> [UART, PM25] Reading data...
19:50:06:692 -> [UART, PM25] Data not available.
19:50:06:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:692 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:692 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:713 -> [UART, PM25] Reading data...
19:50:06:714 -> [UART, PM25] Data not available.
19:50:06:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:714 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:714 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:734 -> [UART, PM25] Reading data...
19:50:06:734 -> [UART, PM25] Data not available.
19:50:06:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:755 -> [UART, PM25] Reading data...
19:50:06:756 -> [UART, PM25] Data not available.
19:50:06:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:756 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:756 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:776 -> [UART, PM25] Reading data...
19:50:06:777 -> [UART, PM25] Data not available.
19:50:06:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:797 -> [UART, PM25] Reading data...
19:50:06:798 -> [UART, PM25] Data not available.
19:50:06:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:818 -> [UART, PM25] Reading data...
19:50:06:819 -> [UART, PM25] Data not available.
19:50:06:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:839 -> [UART, PM25] Reading data...
19:50:06:840 -> [UART, PM25] Data not available.
19:50:06:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:840 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:840 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:860 -> [UART, PM25] Reading data...
19:50:06:860 -> [UART, PM25] Data not available.
19:50:06:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:860 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:860 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:881 -> [UART, PM25] Reading data...
19:50:06:882 -> [UART, PM25] Data not available.
19:50:06:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:882 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:882 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:902 -> [UART, PM25] Reading data...
19:50:06:903 -> [UART, PM25] Data not available.
19:50:06:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:903 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:903 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:923 -> [UART, PM25] Reading data...
19:50:06:923 -> [UART, PM25] Data not available.
19:50:06:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:944 -> [UART, PM25] Reading data...
19:50:06:944 -> [UART, PM25] Data not available.
19:50:06:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:944 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:944 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:965 -> [UART, PM25] Reading data...
19:50:06:966 -> [UART, PM25] Data not available.
19:50:06:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:06:986 -> [UART, PM25] Reading data...
19:50:06:987 -> [UART, PM25] Data not available.
19:50:06:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:06:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:06:987 -> [UART, PM25] Uart available, clearing write errors..
19:50:06:987 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:007 -> [UART, PM25] Reading data...
19:50:07:007 -> [UART, PM25] Data not available.
19:50:07:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:008 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:008 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:028 -> [UART, PM25] Reading data...
19:50:07:029 -> [UART, PM25] Data not available.
19:50:07:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:029 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:029 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:049 -> [UART, PM25] Reading data...
19:50:07:050 -> [UART, PM25] Data not available.
19:50:07:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:050 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:050 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:070 -> [UART, PM25] Reading data...
19:50:07:071 -> [UART, PM25] Data not available.
19:50:07:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:071 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:071 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:091 -> [UART, PM25] Reading data...
19:50:07:092 -> [UART, PM25] Data not available.
19:50:07:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:092 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:092 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:142 -> [UART, PM25] Reading data...
19:50:07:151 -> [UART, PM25] Data not available.
19:50:07:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:151 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:151 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:151 -> [UART, PM25] Reading data...
19:50:07:151 -> [UART, PM25] Data not available.
19:50:07:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:151 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:151 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:154 -> [UART, PM25] Reading data...
19:50:07:154 -> [UART, PM25] Data not available.
19:50:07:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:154 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:154 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:175 -> [UART, PM25] Reading data...
19:50:07:175 -> [UART, PM25] Data not available.
19:50:07:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:175 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:175 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:202 -> [UART, PM25] Reading data...
19:50:07:202 -> [UART, PM25] Data not available.
19:50:07:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:217 -> [UART, PM25] Reading data...
19:50:07:218 -> [UART, PM25] Data not available.
19:50:07:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:218 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:218 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:239 -> [UART, PM25] Reading data...
19:50:07:239 -> [UART, PM25] Data not available.
19:50:07:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:239 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:239 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:259 -> [UART, PM25] Reading data...
19:50:07:259 -> [UART, PM25] Data not available.
19:50:07:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:259 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:259 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:280 -> [UART, PM25] Reading data...
19:50:07:281 -> [UART, PM25] Data not available.
19:50:07:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:281 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:281 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:301 -> [UART, PM25] Reading data...
19:50:07:302 -> [UART, PM25] Data not available.
19:50:07:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:322 -> [UART, PM25] Reading data...
19:50:07:323 -> [UART, PM25] Data not available.
19:50:07:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:323 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:323 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:343 -> [UART, PM25] Reading data...
19:50:07:344 -> [UART, PM25] Data not available.
19:50:07:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:344 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:344 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:365 -> [UART, PM25] Reading data...
19:50:07:365 -> [UART, PM25] Data not available.
19:50:07:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:365 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:365 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:385 -> [UART, PM25] Reading data...
19:50:07:385 -> [UART, PM25] Data not available.
19:50:07:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:386 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:386 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:406 -> [UART, PM25] Reading data...
19:50:07:407 -> [UART, PM25] Data not available.
19:50:07:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:407 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:407 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:427 -> [UART, PM25] Reading data...
19:50:07:428 -> [UART, PM25] Data not available.
19:50:07:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:428 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:428 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:448 -> [UART, PM25] Reading data...
19:50:07:449 -> [UART, PM25] Data not available.
19:50:07:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:449 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:449 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:469 -> [UART, PM25] Reading data...
19:50:07:470 -> [UART, PM25] Data not available.
19:50:07:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:470 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:470 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:490 -> [UART, PM25] Reading data...
19:50:07:491 -> [UART, PM25] Data not available.
19:50:07:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:491 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:491 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:511 -> [UART, PM25] Reading data...
19:50:07:511 -> [UART, PM25] Data not available.
19:50:07:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:511 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:511 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:532 -> [UART, PM25] Reading data...
19:50:07:533 -> [UART, PM25] Data not available.
19:50:07:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:533 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:533 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:553 -> [UART, PM25] Reading data...
19:50:07:554 -> [UART, PM25] Data not available.
19:50:07:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:554 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:554 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:574 -> [UART, PM25] Reading data...
19:50:07:575 -> [UART, PM25] Data not available.
19:50:07:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:575 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:575 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:595 -> [UART, PM25] Reading data...
19:50:07:596 -> [UART, PM25] Data not available.
19:50:07:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:596 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:596 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:616 -> [UART, PM25] Reading data...
19:50:07:617 -> [UART, PM25] Data not available.
19:50:07:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:637 -> [UART, PM25] Reading data...
19:50:07:637 -> [UART, PM25] Data not available.
19:50:07:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:658 -> [UART, PM25] Reading data...
19:50:07:659 -> [UART, PM25] Data not available.
19:50:07:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:659 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:659 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:679 -> [UART, PM25] Reading data...
19:50:07:679 -> [UART, PM25] Data not available.
19:50:07:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:679 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:679 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:701 -> [UART, PM25] Reading data...
19:50:07:701 -> [UART, PM25] Data not available.
19:50:07:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:701 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:701 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:721 -> [UART, PM25] Reading data...
19:50:07:722 -> [UART, PM25] Data not available.
19:50:07:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:722 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:722 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:742 -> [UART, PM25] Reading data...
19:50:07:743 -> [UART, PM25] Data not available.
19:50:07:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:743 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:743 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:763 -> [UART, PM25] Reading data...
19:50:07:764 -> [UART, PM25] Data not available.
19:50:07:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:764 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:764 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:784 -> [UART, PM25] Reading data...
19:50:07:785 -> [UART, PM25] Data not available.
19:50:07:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:785 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:785 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:805 -> [UART, PM25] Reading data...
19:50:07:806 -> [UART, PM25] Data not available.
19:50:07:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:826 -> [UART, PM25] Reading data...
19:50:07:827 -> [UART, PM25] Data not available.
19:50:07:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:827 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:827 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:847 -> [UART, PM25] Reading data...
19:50:07:848 -> [UART, PM25] Data not available.
19:50:07:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:848 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:848 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:868 -> [UART, PM25] Reading data...
19:50:07:869 -> [UART, PM25] Data not available.
19:50:07:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:869 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:869 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:889 -> [UART, PM25] Reading data...
19:50:07:890 -> [UART, PM25] Data not available.
19:50:07:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:890 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:890 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:910 -> [UART, PM25] Reading data...
19:50:07:911 -> [UART, PM25] Data not available.
19:50:07:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:911 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:911 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:931 -> [UART, PM25] Reading data...
19:50:07:932 -> [UART, PM25] Data not available.
19:50:07:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:932 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:932 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:952 -> [UART, PM25] Reading data...
19:50:07:953 -> [UART, PM25] Data not available.
19:50:07:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:953 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:953 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:973 -> [UART, PM25] Reading data...
19:50:07:973 -> [UART, PM25] Data not available.
19:50:07:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:973 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:973 -> [UART, PM25] Uart available, resetting event queue..
19:50:07:994 -> [UART, PM25] Reading data...
19:50:07:994 -> [UART, PM25] Data not available.
19:50:07:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:07:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:07:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:07:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:015 -> [UART, PM25] Reading data...
19:50:08:016 -> [UART, PM25] Data not available.
19:50:08:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:016 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:016 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:036 -> [UART, PM25] Reading data...
19:50:08:036 -> [UART, PM25] Data not available.
19:50:08:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:036 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:036 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:057 -> [UART, PM25] Reading data...
19:50:08:058 -> [UART, PM25] Data not available.
19:50:08:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:058 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:058 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:078 -> [UART, PM25] Reading data...
19:50:08:079 -> [UART, PM25] Data not available.
19:50:08:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:079 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:079 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:099 -> [UART, PM25] Reading data...
19:50:08:100 -> [UART, PM25] Data not available.
19:50:08:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:100 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:100 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:120 -> [UART, PM25] Reading data...
19:50:08:121 -> [UART, PM25] Data not available.
19:50:08:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:121 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:121 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:141 -> [UART, PM25] Reading data...
19:50:08:142 -> [UART, PM25] Data not available.
19:50:08:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:162 -> [UART, PM25] Reading data...
19:50:08:163 -> [UART, PM25] Data not available.
19:50:08:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:163 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:163 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:183 -> [UART, PM25] Reading data...
19:50:08:184 -> [UART, PM25] Data not available.
19:50:08:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:184 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:184 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:204 -> [UART, PM25] Reading data...
19:50:08:205 -> [UART, PM25] Data not available.
19:50:08:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:205 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:205 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:233 -> [UART, PM25] Reading data...
19:50:08:234 -> [UART, PM25] Data not available.
19:50:08:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:234 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:234 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:246 -> [UART, PM25] Reading data...
19:50:08:247 -> [UART, PM25] Data not available.
19:50:08:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:247 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:247 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:267 -> [UART, PM25] Reading data...
19:50:08:268 -> [UART, PM25] Data not available.
19:50:08:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:268 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:268 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:288 -> [UART, PM25] Reading data...
19:50:08:289 -> [UART, PM25] Data not available.
19:50:08:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:289 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:289 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:309 -> [UART, PM25] Reading data...
19:50:08:310 -> [UART, PM25] Data not available.
19:50:08:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:310 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:310 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:330 -> [UART, PM25] Reading data...
19:50:08:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:352 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:352 -> [UART, PM25] Uart available, resetting event queue..

19:50:08:331 -> [UART, PM25] Data not available.
19:50:08:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:331 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:331 -> [UART, PM25] Uart available, resetting event queue..

19:50:08:352 -> [UART, PM25] Data not available.19:50:08:351 -> [UART, PM25] Reading data...19:50:08:374 -> [UART, PM25] Reading data...
19:50:08:375 -> [UART, PM25] Data not available.
19:50:08:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:375 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:375 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:393 -> [UART, PM25] Reading data...
19:50:08:394 -> [UART, PM25] Data not available.
19:50:08:394 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:394 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:394 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:394 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:414 -> [UART, PM25] Reading data...
19:50:08:415 -> [UART, PM25] Data not available.
19:50:08:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:415 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:415 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:435 -> [UART, PM25] Reading data...
19:50:08:436 -> [UART, PM25] Data not available.
19:50:08:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:436 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:436 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:456 -> [UART, PM25] Reading data...
19:50:08:457 -> [UART, PM25] Data not available.
19:50:08:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:457 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:457 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:477 -> [UART, PM25] Reading data...
19:50:08:478 -> [UART, PM25] Data not available.
19:50:08:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:478 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:478 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:478 -> PING!
19:50:08:691 -> [UART, PM25] Reading data...
19:50:08:692 -> [UART, PM25] Data not available.
19:50:08:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:692 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:692 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:712 -> [UART, PM25] Reading data...
19:50:08:712 -> [UART, PM25] Data not available.
19:50:08:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:712 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:712 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:744 -> [UART, PM25] Reading data...
19:50:08:744 -> [UART, PM25] Data not available.
19:50:08:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:744 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:744 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:754 -> [UART, PM25] Reading data...
19:50:08:755 -> [UART, PM25] Data not available.
19:50:08:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:755 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:755 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:775 -> [UART, PM25] Reading data...
19:50:08:776 -> [UART, PM25] Data not available.
19:50:08:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:776 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:776 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:796 -> [UART, PM25] Reading data...
19:50:08:796 -> [UART, PM25] Data not available.
19:50:08:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:797 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:797 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:817 -> [UART, PM25] Reading data...
19:50:08:817 -> [UART, PM25] Data not available.
19:50:08:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:817 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:817 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:838 -> [UART, PM25] Reading data...
19:50:08:839 -> [UART, PM25] Data not available.
19:50:08:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:839 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:839 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:859 -> [UART, PM25] Reading data...
19:50:08:860 -> [UART, PM25] Data not available.
19:50:08:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:860 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:860 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:881 -> [UART, PM25] Reading data...
19:50:08:908 -> [UART, PM25] Data not available.
19:50:08:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:908 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:908 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:908 -> [UART, PM25] Reading data...
19:50:08:908 -> [UART, PM25] Data not available.
19:50:08:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:908 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:908 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:922 -> [UART, PM25] Reading data...
19:50:08:923 -> [UART, PM25] Data not available.
19:50:08:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:923 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:923 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:943 -> [UART, PM25] Reading data...
19:50:08:943 -> [UART, PM25] Data not available.
19:50:08:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:943 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:943 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:964 -> [UART, PM25] Reading data...
19:50:08:964 -> [UART, PM25] Data not available.
19:50:08:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:964 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:964 -> [UART, PM25] Uart available, resetting event queue..
19:50:08:985 -> [UART, PM25] Reading data...
19:50:08:986 -> [UART, PM25] Data not available.
19:50:08:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:08:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:08:986 -> [UART, PM25] Uart available, clearing write errors..
19:50:08:986 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:006 -> [UART, PM25] Reading data...
19:50:09:007 -> [UART, PM25] Data not available.
19:50:09:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:007 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:007 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:027 -> [UART, PM25] Reading data...
19:50:09:028 -> [UART, PM25] Data not available.
19:50:09:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:028 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:028 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:048 -> [UART, PM25] Reading data...
19:50:09:049 -> [UART, PM25] Data not available.
19:50:09:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:049 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:049 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:069 -> [UART, PM25] Reading data...
19:50:09:070 -> [UART, PM25] Data not available.
19:50:09:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:070 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:070 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:091 -> [UART, PM25] Reading data...
19:50:09:091 -> [UART, PM25] Data not available.
19:50:09:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:091 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:091 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:111 -> [UART, PM25] Reading data...
19:50:09:112 -> [UART, PM25] Data not available.
19:50:09:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:112 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:112 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:132 -> [UART, PM25] Reading data...
19:50:09:133 -> [UART, PM25] Data not available.
19:50:09:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:133 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:133 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:153 -> [UART, PM25] Reading data...
19:50:09:154 -> [UART, PM25] Data not available.
19:50:09:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:154 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:154 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:174 -> [UART, PM25] Reading data...
19:50:09:175 -> [UART, PM25] Data not available.
19:50:09:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:175 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:175 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:195 -> [UART, PM25] Reading data...
19:50:09:196 -> [UART, PM25] Data not available.
19:50:09:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:196 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:196 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:216 -> [UART, PM25] Reading data...
19:50:09:216 -> [UART, PM25] Data not available.
19:50:09:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:217 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:217 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:237 -> [UART, PM25] Reading data...
19:50:09:238 -> [UART, PM25] Data not available.
19:50:09:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:238 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:238 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:258 -> [UART, PM25] Reading data...
19:50:09:259 -> [UART, PM25] Data not available.
19:50:09:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:259 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:259 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:279 -> [UART, PM25] Reading data...
19:50:09:280 -> [UART, PM25] Data not available.
19:50:09:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:280 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:280 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:300 -> [UART, PM25] Reading data...
19:50:09:301 -> [UART, PM25] Data not available.
19:50:09:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:301 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:301 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:321 -> [UART, PM25] Reading data...
19:50:09:322 -> [UART, PM25] Data not available.
19:50:09:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:322 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:322 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:342 -> [UART, PM25] Reading data...
19:50:09:343 -> [UART, PM25] Data not available.
19:50:09:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:343 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:343 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:363 -> [UART, PM25] Reading data...
19:50:09:364 -> [UART, PM25] Data not available.
19:50:09:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:364 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:364 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:384 -> [UART, PM25] Reading data...
19:50:09:385 -> [UART, PM25] Data not available.
19:50:09:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:385 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:385 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:405 -> [UART, PM25] Reading data...
19:50:09:406 -> [UART, PM25] Data not available.
19:50:09:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:406 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:406 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:426 -> [UART, PM25] Reading data...
19:50:09:427 -> [UART, PM25] Data not available.
19:50:09:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:427 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:427 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:447 -> [UART, PM25] Reading data...
19:50:09:448 -> [UART, PM25] Data not available.
19:50:09:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:448 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:448 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:468 -> [UART, PM25] Reading data...
19:50:09:469 -> [UART, PM25] Data not available.
19:50:09:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:469 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:469 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:489 -> [UART, PM25] Reading data...
19:50:09:489 -> [UART, PM25] Data not available.
19:50:09:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:490 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:490 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:510 -> [UART, PM25] Reading data...
19:50:09:511 -> [UART, PM25] Data not available.
19:50:09:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:511 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:511 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:531 -> [UART, PM25] Reading data...
19:50:09:532 -> [UART, PM25] Data not available.
19:50:09:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:532 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:532 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:552 -> [UART, PM25] Reading data...
19:50:09:552 -> [UART, PM25] Data not available.
19:50:09:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:553 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:553 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:573 -> [UART, PM25] Reading data...
19:50:09:573 -> [UART, PM25] Data not available.
19:50:09:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:573 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:573 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:594 -> [UART, PM25] Reading data...
19:50:09:595 -> [UART, PM25] Data not available.
19:50:09:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:595 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:595 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:615 -> [UART, PM25] Reading data...
19:50:09:615 -> [UART, PM25] Data not available.
19:50:09:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:616 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:616 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:636 -> [UART, PM25] Reading data...
19:50:09:637 -> [UART, PM25] Data not available.
19:50:09:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:657 -> [UART, PM25] Reading data...
19:50:09:658 -> [UART, PM25] Data not available.
19:50:09:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:658 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:658 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:678 -> [UART, PM25] Reading data...
19:50:09:679 -> [UART, PM25] Data not available.
19:50:09:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:679 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:679 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:699 -> [UART, PM25] Reading data...
19:50:09:700 -> [UART, PM25] Data not available.
19:50:09:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:700 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:700 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:720 -> [UART, PM25] Reading data...
19:50:09:721 -> [UART, PM25] Data not available.
19:50:09:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:721 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:721 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:741 -> [UART, PM25] Reading data...
19:50:09:742 -> [UART, PM25] Data not available.
19:50:09:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:742 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:742 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:770 -> [UART, PM25] Reading data...
19:50:09:770 -> [UART, PM25] Data not available.
19:50:09:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:770 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:770 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:783 -> [UART, PM25] Reading data...
19:50:09:784 -> [UART, PM25] Data not available.
19:50:09:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:784 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:784 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:804 -> [UART, PM25] Reading data...
19:50:09:805 -> [UART, PM25] Data not available.
19:50:09:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:805 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:805 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:825 -> [UART, PM25] Reading data...
19:50:09:825 -> [UART, PM25] Data not available.
19:50:09:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:826 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:826 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:846 -> [UART, PM25] Reading data...
19:50:09:847 -> [UART, PM25] Data not available.
19:50:09:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:847 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:847 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:867 -> [UART, PM25] Reading data...
19:50:09:868 -> [UART, PM25] Data not available.
19:50:09:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:868 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:868 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:888 -> [UART, PM25] Reading data...
19:50:09:889 -> [UART, PM25] Data not available.
19:50:09:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:889 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:889 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:909 -> [UART, PM25] Reading data...
19:50:09:910 -> [UART, PM25] Data not available.
19:50:09:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:910 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:910 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:930 -> [UART, PM25] Reading data...
19:50:09:931 -> [UART, PM25] Data not available.
19:50:09:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:931 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:931 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:951 -> [UART, PM25] Reading data...
19:50:09:951 -> [UART, PM25] Data not available.
19:50:09:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:952 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:952 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:972 -> [UART, PM25] Reading data...
19:50:09:973 -> [UART, PM25] Data not available.
19:50:09:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:973 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:973 -> [UART, PM25] Uart available, resetting event queue..
19:50:09:993 -> [UART, PM25] Reading data...
19:50:09:994 -> [UART, PM25] Data not available.
19:50:09:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:09:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:09:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:09:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:014 -> [UART, PM25] Reading data...
19:50:10:014 -> [UART, PM25] Data not available.
19:50:10:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:015 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:015 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:035 -> [UART, PM25] Reading data...
19:50:10:036 -> [UART, PM25] Data not available.
19:50:10:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:036 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:036 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:056 -> [UART, PM25] Reading data...
19:50:10:057 -> [UART, PM25] Data not available.
19:50:10:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:057 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:057 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:077 -> [UART, PM25] Reading data...
19:50:10:077 -> [UART, PM25] Data not available.
19:50:10:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:077 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:077 -> [UART, PM25] Uart available, resetting event queue..

19:50:10:099 -> [UART, PM25] Data not available.
19:50:10:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:099 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:099 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:098 -> [UART, PM25] Reading data...19:50:10:119 -> [UART, PM25] Reading data...
19:50:10:120 -> [UART, PM25] Data not available.
19:50:10:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:120 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:120 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:142 -> [UART, PM25] Reading data...
19:50:10:143 -> [UART, PM25] Data not available.
19:50:10:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:161 -> [UART, PM25] Reading data...
19:50:10:161 -> [UART, PM25] Data not available.
19:50:10:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:161 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:161 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:182 -> [UART, PM25] Reading data...
19:50:10:183 -> [UART, PM25] Data not available.
19:50:10:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:183 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:183 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:203 -> [UART, PM25] Reading data...
19:50:10:204 -> [UART, PM25] Data not available.
19:50:10:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:204 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:204 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:224 -> [UART, PM25] Reading data...
19:50:10:225 -> [UART, PM25] Data not available.
19:50:10:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:225 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:225 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:245 -> [UART, PM25] Reading data...
19:50:10:246 -> [UART, PM25] Data not available.
19:50:10:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:246 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:246 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:266 -> [UART, PM25] Reading data...
19:50:10:266 -> [UART, PM25] Data not available.
19:50:10:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:267 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:267 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:293 -> [UART, PM25] Reading data...
19:50:10:294 -> [UART, PM25] Data not available.
19:50:10:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:309 -> [UART, PM25] Reading data...
19:50:10:309 -> [UART, PM25] Data not available.
19:50:10:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:309 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:309 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:329 -> [UART, PM25] Reading data...
19:50:10:329 -> [UART, PM25] Data not available.
19:50:10:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:329 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:329 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:350 -> [UART, PM25] Reading data...
19:50:10:351 -> [UART, PM25] Data not available.
19:50:10:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:351 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:351 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:371 -> [UART, PM25] Reading data...
19:50:10:372 -> [UART, PM25] Data not available.
19:50:10:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:372 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:372 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:392 -> [UART, PM25] Reading data...
19:50:10:393 -> [UART, PM25] Data not available.
19:50:10:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:393 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:393 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:413 -> [UART, PM25] Reading data...
19:50:10:414 -> [UART, PM25] Data not available.
19:50:10:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:414 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:414 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:437 -> [UART, PM25] Reading data...
19:50:10:438 -> [UART, PM25] Data not available.
19:50:10:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:438 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:438 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:455 -> [UART, PM25] Reading data...
19:50:10:455 -> [UART, PM25] Data not available.
19:50:10:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:456 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:456 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:476 -> [UART, PM25] Reading data...
19:50:10:477 -> [UART, PM25] Data not available.
19:50:10:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:477 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:477 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:524 -> [UART, PM25] Reading data...
19:50:10:525 -> [UART, PM25] Data not available.
19:50:10:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:525 -> [UART, PM25] Reading data...
19:50:10:525 -> [UART, PM25] Data not available.
19:50:10:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:539 -> [UART, PM25] Reading data...
19:50:10:540 -> [UART, PM25] Data not available.
19:50:10:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:540 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:540 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:560 -> [UART, PM25] Reading data...
19:50:10:561 -> [UART, PM25] Data not available.
19:50:10:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:561 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:561 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:581 -> [UART, PM25] Reading data...
19:50:10:581 -> [UART, PM25] Data not available.
19:50:10:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:582 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:582 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:602 -> [UART, PM25] Reading data...
19:50:10:603 -> [UART, PM25] Data not available.
19:50:10:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:603 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:603 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:623 -> [UART, PM25] Reading data...
19:50:10:624 -> [UART, PM25] Data not available.
19:50:10:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:624 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:624 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:644 -> [UART, PM25] Reading data...
19:50:10:644 -> [UART, PM25] Data not available.
19:50:10:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:644 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:644 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:665 -> [UART, PM25] Reading data...
19:50:10:666 -> [UART, PM25] Data not available.
19:50:10:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:666 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:666 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:686 -> [UART, PM25] Reading data...
19:50:10:687 -> [UART, PM25] Data not available.
19:50:10:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:687 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:687 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:707 -> [UART, PM25] Reading data...
19:50:10:708 -> [UART, PM25] Data not available.
19:50:10:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:708 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:708 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:728 -> [UART, PM25] Reading data...
19:50:10:729 -> [UART, PM25] Data not available.
19:50:10:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:729 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:729 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:749 -> [UART, PM25] Reading data...
19:50:10:750 -> [UART, PM25] Data not available.
19:50:10:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:750 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:750 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:770 -> [UART, PM25] Reading data...
19:50:10:770 -> [UART, PM25] Data not available.
19:50:10:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:770 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:770 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:791 -> [UART, PM25] Reading data...
19:50:10:792 -> [UART, PM25] Data not available.
19:50:10:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:792 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:792 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:812 -> [UART, PM25] Reading data...
19:50:10:813 -> [UART, PM25] Data not available.
19:50:10:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:813 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:813 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:833 -> [UART, PM25] Reading data...
19:50:10:834 -> [UART, PM25] Data not available.
19:50:10:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:834 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:834 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:854 -> [UART, PM25] Reading data...
19:50:10:855 -> [UART, PM25] Data not available.
19:50:10:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:855 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:855 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:875 -> [UART, PM25] Reading data...
19:50:10:876 -> [UART, PM25] Data not available.
19:50:10:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:876 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:876 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:896 -> [UART, PM25] Reading data...
19:50:10:897 -> [UART, PM25] Data not available.
19:50:10:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:897 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:897 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:917 -> [UART, PM25] Reading data...
19:50:10:918 -> [UART, PM25] Data not available.
19:50:10:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:918 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:918 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:938 -> [UART, PM25] Reading data...
19:50:10:938 -> [UART, PM25] Data not available.
19:50:10:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:939 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:939 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:959 -> [UART, PM25] Reading data...
19:50:10:960 -> [UART, PM25] Data not available.
19:50:10:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:960 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:960 -> [UART, PM25] Uart available, resetting event queue..
19:50:10:980 -> [UART, PM25] Reading data...
19:50:10:980 -> [UART, PM25] Data not available.
19:50:10:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:10:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:10:980 -> [UART, PM25] Uart available, clearing write errors..
19:50:10:980 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:001 -> [UART, PM25] Reading data...
19:50:11:001 -> [UART, PM25] Data not available.
19:50:11:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:002 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:002 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:022 -> [UART, PM25] Reading data...
19:50:11:023 -> [UART, PM25] Data not available.
19:50:11:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:023 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:023 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:043 -> [UART, PM25] Reading data...
19:50:11:044 -> [UART, PM25] Data not available.
19:50:11:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:044 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:044 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:065 -> [UART, PM25] Reading data...
19:50:11:065 -> [UART, PM25] Data not available.
19:50:11:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:065 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:065 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:085 -> [UART, PM25] Reading data...
19:50:11:086 -> [UART, PM25] Data not available.
19:50:11:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:086 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:086 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:106 -> [UART, PM25] Reading data...
19:50:11:106 -> [UART, PM25] Data not available.
19:50:11:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:106 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:106 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:127 -> [UART, PM25] Reading data...
19:50:11:128 -> [UART, PM25] Data not available.
19:50:11:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:128 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:128 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:148 -> [UART, PM25] Reading data...
19:50:11:149 -> [UART, PM25] Data not available.
19:50:11:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:149 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:149 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:169 -> [UART, PM25] Reading data...
19:50:11:169 -> [UART, PM25] Data not available.
19:50:11:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:169 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:169 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:190 -> [UART, PM25] Reading data...
19:50:11:190 -> [UART, PM25] Data not available.
19:50:11:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:191 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:191 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:211 -> [UART, PM25] Reading data...
19:50:11:212 -> [UART, PM25] Data not available.
19:50:11:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:212 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:212 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:232 -> [UART, PM25] Reading data...
19:50:11:233 -> [UART, PM25] Data not available.
19:50:11:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:233 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:233 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:253 -> [UART, PM25] Reading data...
19:50:11:253 -> [UART, PM25] Data not available.
19:50:11:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:253 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:253 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:275 -> [UART, PM25] Reading data...
19:50:11:275 -> [UART, PM25] Data not available.
19:50:11:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:275 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:275 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:295 -> [UART, PM25] Reading data...
19:50:11:296 -> [UART, PM25] Data not available.
19:50:11:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:296 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:296 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:328 -> [UART, PM25] Reading data...
19:50:11:329 -> [UART, PM25] Data not available.
19:50:11:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:329 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:329 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:337 -> [UART, PM25] Reading data...
19:50:11:338 -> [UART, PM25] Data not available.
19:50:11:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:338 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:338 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:358 -> [UART, PM25] Reading data...
19:50:11:359 -> [UART, PM25] Data not available.
19:50:11:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:359 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:359 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:379 -> [UART, PM25] Reading data...
19:50:11:380 -> [UART, PM25] Data not available.
19:50:11:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:380 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:380 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:400 -> [UART, PM25] Reading data...
19:50:11:401 -> [UART, PM25] Data not available.
19:50:11:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:401 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:401 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:421 -> [UART, PM25] Reading data...
19:50:11:422 -> [UART, PM25] Data not available.
19:50:11:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:422 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:422 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:442 -> [UART, PM25] Reading data...
19:50:11:443 -> [UART, PM25] Data not available.
19:50:11:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:443 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:443 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:463 -> [UART, PM25] Reading data...
19:50:11:464 -> [UART, PM25] Data not available.
19:50:11:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:464 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:464 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:484 -> [UART, PM25] Reading data...
19:50:11:485 -> [UART, PM25] Data not available.
19:50:11:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:485 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:485 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:505 -> [UART, PM25] Reading data...
19:50:11:506 -> [UART, PM25] Data not available.
19:50:11:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:506 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:506 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:526 -> [UART, PM25] Reading data...
19:50:11:527 -> [UART, PM25] Data not available.
19:50:11:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:527 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:527 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:547 -> [UART, PM25] Reading data...
19:50:11:548 -> [UART, PM25] Data not available.
19:50:11:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:548 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:548 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:568 -> [UART, PM25] Reading data...
19:50:11:568 -> [UART, PM25] Data not available.
19:50:11:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:568 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:568 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:589 -> [UART, PM25] Reading data...
19:50:11:590 -> [UART, PM25] Data not available.
19:50:11:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:590 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:590 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:610 -> [UART, PM25] Reading data...
19:50:11:611 -> [UART, PM25] Data not available.
19:50:11:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:611 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:611 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:631 -> [UART, PM25] Reading data...
19:50:11:631 -> [UART, PM25] Data not available.
19:50:11:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:631 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:631 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:652 -> [UART, PM25] Reading data...
19:50:11:653 -> [UART, PM25] Data not available.
19:50:11:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:653 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:653 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:673 -> [UART, PM25] Reading data...
19:50:11:673 -> [UART, PM25] Data not available.
19:50:11:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:674 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:674 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:694 -> [UART, PM25] Reading data...
19:50:11:694 -> [UART, PM25] Data not available.
19:50:11:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:695 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:695 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:715 -> [UART, PM25] Reading data...
19:50:11:716 -> [UART, PM25] Data not available.
19:50:11:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:716 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:716 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:737 -> [UART, PM25] Reading data...
19:50:11:737 -> [UART, PM25] Data not available.
19:50:11:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:737 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:737 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:757 -> [UART, PM25] Reading data...
19:50:11:758 -> [UART, PM25] Data not available.
19:50:11:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:758 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:758 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:778 -> [UART, PM25] Reading data...
19:50:11:779 -> [UART, PM25] Data not available.
19:50:11:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:779 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:779 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:799 -> [UART, PM25] Reading data...
19:50:11:800 -> [UART, PM25] Data not available.
19:50:11:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:800 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:800 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:820 -> [UART, PM25] Reading data...
19:50:11:820 -> [UART, PM25] Data not available.
19:50:11:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:820 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:820 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:845 -> [UART, PM25] Reading data...
19:50:11:845 -> [UART, PM25] Data not available.
19:50:11:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:846 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:846 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:862 -> [UART, PM25] Reading data...
19:50:11:863 -> [UART, PM25] Data not available.
19:50:11:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:863 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:863 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:883 -> [UART, PM25] Reading data...
19:50:11:883 -> [UART, PM25] Data not available.
19:50:11:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:904 -> [UART, PM25] Reading data...
19:50:11:905 -> [UART, PM25] Data not available.
19:50:11:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:905 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:905 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:925 -> [UART, PM25] Reading data...
19:50:11:926 -> [UART, PM25] Data not available.
19:50:11:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:926 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:926 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:946 -> [UART, PM25] Reading data...
19:50:11:946 -> [UART, PM25] Data not available.
19:50:11:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:947 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:947 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:967 -> [UART, PM25] Reading data...
19:50:11:968 -> [UART, PM25] Data not available.
19:50:11:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:968 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:968 -> [UART, PM25] Uart available, resetting event queue..
19:50:11:988 -> [UART, PM25] Reading data...
19:50:11:989 -> [UART, PM25] Data not available.
19:50:11:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:11:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:11:989 -> [UART, PM25] Uart available, clearing write errors..
19:50:11:989 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:009 -> [UART, PM25] Reading data...
19:50:12:010 -> [UART, PM25] Data not available.
19:50:12:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:010 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:010 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:056 -> [UART, PM25] Reading data...
19:50:12:067 -> [UART, PM25] Data not available.
19:50:12:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:067 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:067 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:067 -> [UART, PM25] Reading data...
19:50:12:067 -> [UART, PM25] Data not available.
19:50:12:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:067 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:067 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:072 -> [UART, PM25] Reading data...
19:50:12:073 -> [UART, PM25] Data not available.
19:50:12:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:073 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:073 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:093 -> [UART, PM25] Reading data...
19:50:12:094 -> [UART, PM25] Data not available.
19:50:12:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:094 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:094 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:114 -> [UART, PM25] Reading data...
19:50:12:115 -> [UART, PM25] Data not available.
19:50:12:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:115 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:115 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:135 -> [UART, PM25] Reading data...
19:50:12:136 -> [UART, PM25] Data not available.
19:50:12:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:136 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:136 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:156 -> [UART, PM25] Reading data...
19:50:12:157 -> [UART, PM25] Data not available.
19:50:12:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:157 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:157 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:177 -> [UART, PM25] Reading data...
19:50:12:178 -> [UART, PM25] Data not available.
19:50:12:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:178 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:178 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:198 -> [UART, PM25] Reading data...
19:50:12:199 -> [UART, PM25] Data not available.
19:50:12:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:199 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:199 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:219 -> [UART, PM25] Reading data...
19:50:12:220 -> [UART, PM25] Data not available.
19:50:12:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:220 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:220 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:240 -> [UART, PM25] Reading data...
19:50:12:240 -> [UART, PM25] Data not available.
19:50:12:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:240 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:240 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:261 -> [UART, PM25] Reading data...
19:50:12:261 -> [UART, PM25] Data not available.
19:50:12:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:262 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:262 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:282 -> [UART, PM25] Reading data...
19:50:12:283 -> [UART, PM25] Data not available.
19:50:12:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:283 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:283 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:303 -> [UART, PM25] Reading data...
19:50:12:304 -> [UART, PM25] Data not available.
19:50:12:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:304 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:304 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:324 -> [UART, PM25] Reading data...
19:50:12:324 -> [UART, PM25] Data not available.
19:50:12:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:324 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:324 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:345 -> [UART, PM25] Reading data...
19:50:12:359 -> [UART, PM25] Data not available.
19:50:12:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:359 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:359 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:366 -> [UART, PM25] Reading data...
19:50:12:367 -> [UART, PM25] Data not available.
19:50:12:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:367 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:367 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:387 -> [UART, PM25] Reading data...
19:50:12:388 -> [UART, PM25] Data not available.
19:50:12:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:388 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:388 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:408 -> [UART, PM25] Reading data...
19:50:12:409 -> [UART, PM25] Data not available.
19:50:12:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:409 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:409 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:429 -> [UART, PM25] Reading data...
19:50:12:430 -> [UART, PM25] Data not available.
19:50:12:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:430 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:430 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:450 -> [UART, PM25] Reading data...
19:50:12:450 -> [UART, PM25] Data not available.
19:50:12:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:450 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:450 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:471 -> [UART, PM25] Reading data...
19:50:12:472 -> [UART, PM25] Data not available.
19:50:12:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:472 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:472 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:492 -> [UART, PM25] Reading data...
19:50:12:493 -> [UART, PM25] Data not available.
19:50:12:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:493 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:493 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:513 -> [UART, PM25] Reading data...
19:50:12:514 -> [UART, PM25] Data not available.
19:50:12:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:514 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:514 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:534 -> [UART, PM25] Reading data...
19:50:12:534 -> [UART, PM25] Data not available.
19:50:12:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:534 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:534 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:555 -> [UART, PM25] Reading data...
19:50:12:556 -> [UART, PM25] Data not available.
19:50:12:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:556 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:556 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:576 -> [UART, PM25] Reading data...
19:50:12:577 -> [UART, PM25] Data not available.
19:50:12:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:577 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:577 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:597 -> [UART, PM25] Reading data...
19:50:12:598 -> [UART, PM25] Data not available.
19:50:12:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:598 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:598 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:618 -> [UART, PM25] Reading data...
19:50:12:618 -> [UART, PM25] Data not available.
19:50:12:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:618 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:618 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:639 -> [UART, PM25] Reading data...
19:50:12:640 -> [UART, PM25] Data not available.
19:50:12:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:640 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:640 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:660 -> [UART, PM25] Reading data...
19:50:12:661 -> [UART, PM25] Data not available.
19:50:12:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:661 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:661 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:681 -> [UART, PM25] Reading data...
19:50:12:682 -> [UART, PM25] Data not available.
19:50:12:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:682 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:682 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:702 -> [UART, PM25] Reading data...
19:50:12:703 -> [UART, PM25] Data not available.
19:50:12:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:703 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:703 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:723 -> [UART, PM25] Reading data...
19:50:12:723 -> [UART, PM25] Data not available.
19:50:12:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:723 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:723 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:745 -> [UART, PM25] Reading data...
19:50:12:746 -> [UART, PM25] Data not available.
19:50:12:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:746 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:746 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:765 -> [UART, PM25] Reading data...
19:50:12:766 -> [UART, PM25] Data not available.
19:50:12:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:766 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:766 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:786 -> [UART, PM25] Reading data...
19:50:12:786 -> [UART, PM25] Data not available.
19:50:12:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:786 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:786 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:807 -> [UART, PM25] Reading data...
19:50:12:808 -> [UART, PM25] Data not available.
19:50:12:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:808 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:808 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:828 -> [UART, PM25] Reading data...
19:50:12:829 -> [UART, PM25] Data not available.
19:50:12:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:829 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:829 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:849 -> [UART, PM25] Reading data...
19:50:12:850 -> [UART, PM25] Data not available.
19:50:12:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:850 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:850 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:882 -> [UART, PM25] Reading data...
19:50:12:883 -> [UART, PM25] Data not available.
19:50:12:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:891 -> [UART, PM25] Reading data...
19:50:12:891 -> [UART, PM25] Data not available.
19:50:12:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:891 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:891 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:912 -> [UART, PM25] Reading data...
19:50:12:912 -> [UART, PM25] Data not available.
19:50:12:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:912 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:912 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:933 -> [UART, PM25] Reading data...
19:50:12:934 -> [UART, PM25] Data not available.
19:50:12:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:934 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:934 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:954 -> [UART, PM25] Reading data...
19:50:12:955 -> [UART, PM25] Data not available.
19:50:12:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:955 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:955 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:975 -> [UART, PM25] Reading data...
19:50:12:976 -> [UART, PM25] Data not available.
19:50:12:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:976 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:976 -> [UART, PM25] Uart available, resetting event queue..
19:50:12:996 -> [UART, PM25] Reading data...
19:50:12:997 -> [UART, PM25] Data not available.
19:50:12:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:12:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:12:997 -> [UART, PM25] Uart available, clearing write errors..
19:50:12:997 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:017 -> [UART, PM25] Reading data...
19:50:13:017 -> [UART, PM25] Data not available.
19:50:13:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:017 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:017 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:038 -> [UART, PM25] Reading data...
19:50:13:038 -> [UART, PM25] Data not available.
19:50:13:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:038 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:038 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:059 -> [UART, PM25] Reading data...
19:50:13:060 -> [UART, PM25] Data not available.
19:50:13:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:060 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:060 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:080 -> [UART, PM25] Reading data...
19:50:13:080 -> [UART, PM25] Data not available.
19:50:13:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:081 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:081 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:101 -> [UART, PM25] Reading data...
19:50:13:102 -> [UART, PM25] Data not available.
19:50:13:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:102 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:102 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:122 -> [UART, PM25] Reading data...
19:50:13:123 -> [UART, PM25] Data not available.
19:50:13:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:123 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:123 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:143 -> [UART, PM25] Reading data...
19:50:13:143 -> [UART, PM25] Data not available.
19:50:13:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:164 -> [UART, PM25] Reading data...
19:50:13:165 -> [UART, PM25] Data not available.
19:50:13:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:165 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:165 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:185 -> [UART, PM25] Reading data...
19:50:13:186 -> [UART, PM25] Data not available.
19:50:13:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:186 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:186 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:186 -> PING!
19:50:13:409 -> [UART, PM25] Reading data...
19:50:13:410 -> [UART, PM25] Data not available.
19:50:13:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:410 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:410 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:430 -> [UART, PM25] Reading data...
19:50:13:431 -> [UART, PM25] Data not available.
19:50:13:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:431 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:431 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:451 -> [UART, PM25] Reading data...
19:50:13:452 -> [UART, PM25] Data not available.
19:50:13:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:452 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:452 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:472 -> [UART, PM25] Reading data...
19:50:13:473 -> [UART, PM25] Data not available.
19:50:13:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:473 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:473 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:493 -> [UART, PM25] Reading data...
19:50:13:494 -> [UART, PM25] Data not available.
19:50:13:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:494 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:494 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:514 -> [UART, PM25] Reading data...
19:50:13:515 -> [UART, PM25] Data not available.
19:50:13:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:515 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:515 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:535 -> [UART, PM25] Reading data...
19:50:13:536 -> [UART, PM25] Data not available.
19:50:13:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:536 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:536 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:556 -> [UART, PM25] Reading data...
19:50:13:556 -> [UART, PM25] Data not available.
19:50:13:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:556 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:556 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:577 -> [UART, PM25] Reading data...
19:50:13:578 -> [UART, PM25] Data not available.
19:50:13:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:578 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:578 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:598 -> [UART, PM25] Reading data...
19:50:13:598 -> [UART, PM25] Data not available.
19:50:13:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:599 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:599 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:619 -> [UART, PM25] Reading data...
19:50:13:620 -> [UART, PM25] Data not available.
19:50:13:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:620 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:620 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:640 -> [UART, PM25] Reading data...
19:50:13:640 -> [UART, PM25] Data not available.
19:50:13:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:640 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:640 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:661 -> [UART, PM25] Reading data...
19:50:13:664 -> [UART, PM25] Data not available.
19:50:13:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:664 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:664 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:682 -> [UART, PM25] Reading data...
19:50:13:683 -> [UART, PM25] Data not available.
19:50:13:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:683 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:683 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:703 -> [UART, PM25] Reading data...
19:50:13:704 -> [UART, PM25] Data not available.
19:50:13:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:704 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:704 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:724 -> [UART, PM25] Reading data...
19:50:13:724 -> [UART, PM25] Data not available.
19:50:13:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:724 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:724 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:745 -> [UART, PM25] Reading data...
19:50:13:745 -> [UART, PM25] Data not available.
19:50:13:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:745 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:745 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:766 -> [UART, PM25] Reading data...
19:50:13:767 -> [UART, PM25] Data not available.
19:50:13:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:767 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:767 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:787 -> [UART, PM25] Reading data...
19:50:13:787 -> [UART, PM25] Data not available.
19:50:13:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:787 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:787 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:808 -> [UART, PM25] Reading data...
19:50:13:809 -> [UART, PM25] Data not available.
19:50:13:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:809 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:809 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:838 -> [UART, PM25] Reading data...
19:50:13:857 -> [UART, PM25] Data not available.
19:50:13:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:857 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:857 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:857 -> [UART, PM25] Reading data...
19:50:13:857 -> [UART, PM25] Data not available.
19:50:13:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:857 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:857 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:871 -> [UART, PM25] Reading data...
19:50:13:871 -> [UART, PM25] Data not available.
19:50:13:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:871 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:871 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:892 -> [UART, PM25] Reading data...
19:50:13:893 -> [UART, PM25] Data not available.
19:50:13:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:893 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:893 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:920 -> [UART, PM25] Reading data...
19:50:13:921 -> [UART, PM25] Data not available.
19:50:13:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:921 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:921 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:934 -> [UART, PM25] Reading data...
19:50:13:934 -> [UART, PM25] Data not available.
19:50:13:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:934 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:934 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:955 -> [UART, PM25] Reading data...
19:50:13:955 -> [UART, PM25] Data not available.
19:50:13:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:955 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:955 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:976 -> [UART, PM25] Reading data...
19:50:13:976 -> [UART, PM25] Data not available.
19:50:13:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:976 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:976 -> [UART, PM25] Uart available, resetting event queue..
19:50:13:997 -> [UART, PM25] Reading data...
19:50:13:998 -> [UART, PM25] Data not available.
19:50:13:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:13:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:13:998 -> [UART, PM25] Uart available, clearing write errors..
19:50:13:998 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:018 -> [UART, PM25] Reading data...
19:50:14:019 -> [UART, PM25] Data not available.
19:50:14:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:019 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:019 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:039 -> [UART, PM25] Reading data...
19:50:14:039 -> [UART, PM25] Data not available.
19:50:14:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:039 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:039 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:060 -> [UART, PM25] Reading data...
19:50:14:060 -> [UART, PM25] Data not available.
19:50:14:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:060 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:060 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:081 -> [UART, PM25] Reading data...
19:50:14:082 -> [UART, PM25] Data not available.
19:50:14:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:082 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:082 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:102 -> [UART, PM25] Reading data...
19:50:14:103 -> [UART, PM25] Data not available.
19:50:14:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:103 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:103 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:123 -> [UART, PM25] Reading data...
19:50:14:124 -> [UART, PM25] Data not available.
19:50:14:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:124 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:124 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:144 -> [UART, PM25] Reading data...
19:50:14:145 -> [UART, PM25] Data not available.
19:50:14:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:145 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:145 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:165 -> [UART, PM25] Reading data...
19:50:14:165 -> [UART, PM25] Data not available.
19:50:14:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:166 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:166 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:186 -> [UART, PM25] Reading data...
19:50:14:187 -> [UART, PM25] Data not available.
19:50:14:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:187 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:187 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:207 -> [UART, PM25] Reading data...
19:50:14:208 -> [UART, PM25] Data not available.
19:50:14:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:208 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:208 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:228 -> [UART, PM25] Reading data...
19:50:14:228 -> [UART, PM25] Data not available.
19:50:14:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:228 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:228 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:251 -> [UART, PM25] Reading data...
19:50:14:253 -> [UART, PM25] Data not available.
19:50:14:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:253 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:253 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:270 -> [UART, PM25] Reading data...
19:50:14:271 -> [UART, PM25] Data not available.
19:50:14:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:271 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:271 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:291 -> [UART, PM25] Reading data...
19:50:14:291 -> [UART, PM25] Data not available.
19:50:14:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:291 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:291 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:312 -> [UART, PM25] Reading data...
19:50:14:313 -> [UART, PM25] Data not available.
19:50:14:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:313 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:313 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:333 -> [UART, PM25] Reading data...
19:50:14:334 -> [UART, PM25] Data not available.
19:50:14:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:334 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:334 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:354 -> [UART, PM25] Reading data...
19:50:14:354 -> [UART, PM25] Data not available.
19:50:14:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:354 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:354 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:375 -> [UART, PM25] Reading data...
19:50:14:376 -> [UART, PM25] Data not available.
19:50:14:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:376 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:376 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:396 -> [UART, PM25] Reading data...
19:50:14:397 -> [UART, PM25] Data not available.
19:50:14:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:397 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:397 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:417 -> [UART, PM25] Reading data...
19:50:14:417 -> [UART, PM25] Data not available.
19:50:14:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:417 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:417 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:439 -> [UART, PM25] Reading data...
19:50:14:439 -> [UART, PM25] Data not available.
19:50:14:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:439 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:439 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:459 -> [UART, PM25] Reading data...
19:50:14:460 -> [UART, PM25] Data not available.
19:50:14:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:460 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:460 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:480 -> [UART, PM25] Reading data...
19:50:14:480 -> [UART, PM25] Data not available.
19:50:14:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:480 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:480 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:501 -> [UART, PM25] Reading data...
19:50:14:502 -> [UART, PM25] Data not available.
19:50:14:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:502 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:502 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:522 -> [UART, PM25] Reading data...
19:50:14:522 -> [UART, PM25] Data not available.
19:50:14:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:523 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:523 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:543 -> [UART, PM25] Reading data...
19:50:14:544 -> [UART, PM25] Data not available.
19:50:14:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:544 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:544 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:564 -> [UART, PM25] Reading data...
19:50:14:565 -> [UART, PM25] Data not available.
19:50:14:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:565 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:565 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:585 -> [UART, PM25] Reading data...
19:50:14:585 -> [UART, PM25] Data not available.
19:50:14:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:585 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:585 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:606 -> [UART, PM25] Reading data...
19:50:14:606 -> [UART, PM25] Data not available.
19:50:14:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:607 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:607 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:627 -> [UART, PM25] Reading data...
19:50:14:627 -> [UART, PM25] Data not available.
19:50:14:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:627 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:627 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:648 -> [UART, PM25] Reading data...
19:50:14:648 -> [UART, PM25] Data not available.
19:50:14:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:648 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:648 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:669 -> [UART, PM25] Reading data...
19:50:14:669 -> [UART, PM25] Data not available.
19:50:14:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:669 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:669 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:690 -> [UART, PM25] Reading data...
19:50:14:691 -> [UART, PM25] Data not available.
19:50:14:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:691 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:691 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:711 -> [UART, PM25] Reading data...
19:50:14:712 -> [UART, PM25] Data not available.
19:50:14:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:712 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:712 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:732 -> [UART, PM25] Reading data...
19:50:14:733 -> [UART, PM25] Data not available.
19:50:14:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:733 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:733 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:753 -> [UART, PM25] Reading data...
19:50:14:753 -> [UART, PM25] Data not available.
19:50:14:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:753 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:753 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:774 -> [UART, PM25] Reading data...
19:50:14:774 -> [UART, PM25] Data not available.
19:50:14:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:774 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:774 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:795 -> [UART, PM25] Reading data...
19:50:14:796 -> [UART, PM25] Data not available.
19:50:14:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:796 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:796 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:816 -> [UART, PM25] Reading data...
19:50:14:816 -> [UART, PM25] Data not available.
19:50:14:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:817 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:817 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:837 -> [UART, PM25] Reading data...
19:50:14:838 -> [UART, PM25] Data not available.
19:50:14:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:838 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:838 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:858 -> [UART, PM25] Reading data...
19:50:14:859 -> [UART, PM25] Data not available.
19:50:14:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:859 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:859 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:879 -> [UART, PM25] Reading data...
19:50:14:880 -> [UART, PM25] Data not available.
19:50:14:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:880 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:880 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:900 -> [UART, PM25] Reading data...
19:50:14:901 -> [UART, PM25] Data not available.
19:50:14:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:901 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:901 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:922 -> [UART, PM25] Reading data...
19:50:14:922 -> [UART, PM25] Data not available.
19:50:14:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:922 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:922 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:953 -> [UART, PM25] Reading data...
19:50:14:954 -> [UART, PM25] Data not available.
19:50:14:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:954 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:954 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:963 -> [UART, PM25] Reading data...
19:50:14:964 -> [UART, PM25] Data not available.
19:50:14:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:964 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:964 -> [UART, PM25] Uart available, resetting event queue..
19:50:14:984 -> [UART, PM25] Reading data...
19:50:14:985 -> [UART, PM25] Data not available.
19:50:14:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:14:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:14:985 -> [UART, PM25] Uart available, clearing write errors..
19:50:14:985 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:005 -> [UART, PM25] Reading data...
19:50:15:005 -> [UART, PM25] Data not available.
19:50:15:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:005 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:005 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:026 -> [UART, PM25] Reading data...
19:50:15:027 -> [UART, PM25] Data not available.
19:50:15:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:027 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:027 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:047 -> [UART, PM25] Reading data...
19:50:15:048 -> [UART, PM25] Data not available.
19:50:15:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:048 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:048 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:068 -> [UART, PM25] Reading data...
19:50:15:069 -> [UART, PM25] Data not available.
19:50:15:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:069 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:069 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:089 -> [UART, PM25] Reading data...
19:50:15:090 -> [UART, PM25] Data not available.
19:50:15:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:090 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:090 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:110 -> [UART, PM25] Reading data...
19:50:15:111 -> [UART, PM25] Data not available.
19:50:15:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:111 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:111 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:131 -> [UART, PM25] Reading data...
19:50:15:132 -> [UART, PM25] Data not available.
19:50:15:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:132 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:132 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:152 -> [UART, PM25] Reading data...
19:50:15:153 -> [UART, PM25] Data not available.
19:50:15:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:153 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:153 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:173 -> [UART, PM25] Reading data...
19:50:15:174 -> [UART, PM25] Data not available.
19:50:15:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:174 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:174 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:194 -> [UART, PM25] Reading data...
19:50:15:194 -> [UART, PM25] Data not available.
19:50:15:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:195 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:195 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:215 -> [UART, PM25] Reading data...
19:50:15:216 -> [UART, PM25] Data not available.
19:50:15:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:216 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:216 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:236 -> [UART, PM25] Reading data...
19:50:15:237 -> [UART, PM25] Data not available.
19:50:15:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:237 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:237 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:257 -> [UART, PM25] Reading data...
19:50:15:257 -> [UART, PM25] Data not available.
19:50:15:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:258 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:258 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:278 -> [UART, PM25] Reading data...
19:50:15:278 -> [UART, PM25] Data not available.
19:50:15:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:278 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:278 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:299 -> [UART, PM25] Reading data...
19:50:15:300 -> [UART, PM25] Data not available.
19:50:15:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:300 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:300 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:320 -> [UART, PM25] Reading data...
19:50:15:321 -> [UART, PM25] Data not available.
19:50:15:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:321 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:321 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:341 -> [UART, PM25] Reading data...
19:50:15:342 -> [UART, PM25] Data not available.
19:50:15:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:342 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:342 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:362 -> [UART, PM25] Reading data...
19:50:15:363 -> [UART, PM25] Data not available.
19:50:15:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:363 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:363 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:383 -> [UART, PM25] Reading data...
19:50:15:383 -> [UART, PM25] Data not available.
19:50:15:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:383 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:383 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:404 -> [UART, PM25] Reading data...
19:50:15:405 -> [UART, PM25] Data not available.
19:50:15:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:405 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:405 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:425 -> [UART, PM25] Reading data...
19:50:15:426 -> [UART, PM25] Data not available.
19:50:15:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:426 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:426 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:446 -> [UART, PM25] Reading data...
19:50:15:446 -> [UART, PM25] Data not available.
19:50:15:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:446 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:446 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:473 -> [UART, PM25] Reading data...
19:50:15:473 -> [UART, PM25] Data not available.
19:50:15:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:473 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:473 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:488 -> [UART, PM25] Reading data...
19:50:15:489 -> [UART, PM25] Data not available.
19:50:15:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:489 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:489 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:509 -> [UART, PM25] Reading data...
19:50:15:509 -> [UART, PM25] Data not available.
19:50:15:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:509 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:509 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:530 -> [UART, PM25] Reading data...
19:50:15:531 -> [UART, PM25] Data not available.
19:50:15:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:531 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:531 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:551 -> [UART, PM25] Reading data...
19:50:15:573 -> [UART, PM25] Data not available.
19:50:15:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:573 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:573 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:573 -> [UART, PM25] Reading data...
19:50:15:573 -> [UART, PM25] Data not available.
19:50:15:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:573 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:573 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:593 -> [UART, PM25] Reading data...
19:50:15:594 -> [UART, PM25] Data not available.
19:50:15:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:594 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:594 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:614 -> [UART, PM25] Reading data...
19:50:15:614 -> [UART, PM25] Data not available.
19:50:15:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:614 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:614 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:635 -> [UART, PM25] Reading data...
19:50:15:635 -> [UART, PM25] Data not available.
19:50:15:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:636 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:636 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:656 -> [UART, PM25] Reading data...
19:50:15:656 -> [UART, PM25] Data not available.
19:50:15:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:656 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:656 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:677 -> [UART, PM25] Reading data...
19:50:15:677 -> [UART, PM25] Data not available.
19:50:15:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:677 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:677 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:698 -> [UART, PM25] Reading data...
19:50:15:699 -> [UART, PM25] Data not available.
19:50:15:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:699 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:699 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:719 -> [UART, PM25] Reading data...
19:50:15:719 -> [UART, PM25] Data not available.
19:50:15:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:720 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:720 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:740 -> [UART, PM25] Reading data...
19:50:15:740 -> [UART, PM25] Data not available.
19:50:15:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:740 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:740 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:761 -> [UART, PM25] Reading data...
19:50:15:762 -> [UART, PM25] Data not available.
19:50:15:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:762 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:762 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:782 -> [UART, PM25] Reading data...
19:50:15:783 -> [UART, PM25] Data not available.
19:50:15:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:783 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:783 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:803 -> [UART, PM25] Reading data...
19:50:15:804 -> [UART, PM25] Data not available.
19:50:15:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:804 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:804 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:824 -> [UART, PM25] Reading data...
19:50:15:825 -> [UART, PM25] Data not available.
19:50:15:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:825 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:825 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:845 -> [UART, PM25] Reading data...
19:50:15:846 -> [UART, PM25] Data not available.
19:50:15:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:846 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:846 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:866 -> [UART, PM25] Reading data...
19:50:15:867 -> [UART, PM25] Data not available.
19:50:15:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:867 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:867 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:887 -> [UART, PM25] Reading data...
19:50:15:888 -> [UART, PM25] Data not available.
19:50:15:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:888 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:888 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:908 -> [UART, PM25] Reading data...
19:50:15:908 -> [UART, PM25] Data not available.
19:50:15:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:908 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:908 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:929 -> [UART, PM25] Reading data...
19:50:15:930 -> [UART, PM25] Data not available.
19:50:15:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:930 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:930 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:950 -> [UART, PM25] Reading data...
19:50:15:951 -> [UART, PM25] Data not available.
19:50:15:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:951 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:951 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:971 -> [UART, PM25] Reading data...
19:50:15:971 -> [UART, PM25] Data not available.
19:50:15:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:971 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:971 -> [UART, PM25] Uart available, resetting event queue..
19:50:15:993 -> [UART, PM25] Reading data...
19:50:15:994 -> [UART, PM25] Data not available.
19:50:15:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:15:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:15:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:15:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:013 -> [UART, PM25] Reading data...
19:50:16:013 -> [UART, PM25] Data not available.
19:50:16:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:013 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:013 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:034 -> [UART, PM25] Reading data...
19:50:16:035 -> [UART, PM25] Data not available.
19:50:16:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:035 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:035 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:055 -> [UART, PM25] Reading data...
19:50:16:056 -> [UART, PM25] Data not available.
19:50:16:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:056 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:056 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:076 -> [UART, PM25] Reading data...
19:50:16:077 -> [UART, PM25] Data not available.
19:50:16:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:077 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:077 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:097 -> [UART, PM25] Reading data...
19:50:16:097 -> [UART, PM25] Data not available.
19:50:16:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:098 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:098 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:118 -> [UART, PM25] Reading data...
19:50:16:119 -> [UART, PM25] Data not available.
19:50:16:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:119 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:119 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:139 -> [UART, PM25] Reading data...
19:50:16:139 -> [UART, PM25] Data not available.
19:50:16:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:160 -> [UART, PM25] Reading data...
19:50:16:161 -> [UART, PM25] Data not available.
19:50:16:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:161 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:161 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:181 -> [UART, PM25] Reading data...
19:50:16:182 -> [UART, PM25] Data not available.
19:50:16:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:182 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:182 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:202 -> [UART, PM25] Reading data...
19:50:16:202 -> [UART, PM25] Data not available.
19:50:16:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:223 -> [UART, PM25] Reading data...
19:50:16:223 -> [UART, PM25] Data not available.
19:50:16:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:244 -> [UART, PM25] Reading data...
19:50:16:245 -> [UART, PM25] Data not available.
19:50:16:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:245 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:245 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:265 -> [UART, PM25] Reading data...
19:50:16:266 -> [UART, PM25] Data not available.
19:50:16:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:266 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:266 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:286 -> [UART, PM25] Reading data...
19:50:16:286 -> [UART, PM25] Data not available.
19:50:16:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:286 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:286 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:307 -> [UART, PM25] Reading data...
19:50:16:308 -> [UART, PM25] Data not available.
19:50:16:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:308 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:308 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:328 -> [UART, PM25] Reading data...
19:50:16:328 -> [UART, PM25] Data not available.
19:50:16:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:328 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:328 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:349 -> [UART, PM25] Reading data...
19:50:16:350 -> [UART, PM25] Data not available.
19:50:16:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:350 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:350 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:370 -> [UART, PM25] Reading data...
19:50:16:370 -> [UART, PM25] Data not available.
19:50:16:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:370 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:370 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:391 -> [UART, PM25] Reading data...
19:50:16:391 -> [UART, PM25] Data not available.
19:50:16:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:392 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:392 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:412 -> [UART, PM25] Reading data...
19:50:16:412 -> [UART, PM25] Data not available.
19:50:16:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:413 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:413 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:433 -> [UART, PM25] Reading data...
19:50:16:434 -> [UART, PM25] Data not available.
19:50:16:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:434 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:434 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:454 -> [UART, PM25] Reading data...
19:50:16:455 -> [UART, PM25] Data not available.
19:50:16:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:455 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:455 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:475 -> [UART, PM25] Reading data...
19:50:16:476 -> [UART, PM25] Data not available.
19:50:16:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:476 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:476 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:505 -> [UART, PM25] Reading data...
19:50:16:506 -> [UART, PM25] Data not available.
19:50:16:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:506 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:506 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:517 -> [UART, PM25] Reading data...
19:50:16:518 -> [UART, PM25] Data not available.
19:50:16:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:518 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:518 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:538 -> [UART, PM25] Reading data...
19:50:16:539 -> [UART, PM25] Data not available.
19:50:16:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:539 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:539 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:559 -> [UART, PM25] Reading data...
19:50:16:560 -> [UART, PM25] Data not available.
19:50:16:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:560 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:560 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:580 -> [UART, PM25] Reading data...
19:50:16:581 -> [UART, PM25] Data not available.
19:50:16:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:581 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:581 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:601 -> [UART, PM25] Reading data...
19:50:16:601 -> [UART, PM25] Data not available.
19:50:16:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:622 -> [UART, PM25] Reading data...
19:50:16:623 -> [UART, PM25] Data not available.
19:50:16:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:623 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:623 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:643 -> [UART, PM25] Reading data...
19:50:16:644 -> [UART, PM25] Data not available.
19:50:16:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:644 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:644 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:664 -> [UART, PM25] Reading data...
19:50:16:664 -> [UART, PM25] Data not available.
19:50:16:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:665 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:665 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:685 -> [UART, PM25] Reading data...
19:50:16:686 -> [UART, PM25] Data not available.
19:50:16:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:686 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:686 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:706 -> [UART, PM25] Reading data...
19:50:16:707 -> [UART, PM25] Data not available.
19:50:16:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:707 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:707 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:727 -> [UART, PM25] Reading data...
19:50:16:727 -> [UART, PM25] Data not available.
19:50:16:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:727 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:727 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:748 -> [UART, PM25] Reading data...
19:50:16:749 -> [UART, PM25] Data not available.
19:50:16:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:749 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:749 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:769 -> [UART, PM25] Reading data...
19:50:16:770 -> [UART, PM25] Data not available.
19:50:16:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:770 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:770 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:790 -> [UART, PM25] Reading data...
19:50:16:791 -> [UART, PM25] Data not available.
19:50:16:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:791 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:791 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:811 -> [UART, PM25] Reading data...
19:50:16:812 -> [UART, PM25] Data not available.
19:50:16:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:812 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:812 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:832 -> [UART, PM25] Reading data...
19:50:16:832 -> [UART, PM25] Data not available.
19:50:16:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:832 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:832 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:853 -> [UART, PM25] Reading data...
19:50:16:853 -> [UART, PM25] Data not available.
19:50:16:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:854 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:854 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:874 -> [UART, PM25] Reading data...
19:50:16:875 -> [UART, PM25] Data not available.
19:50:16:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:875 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:875 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:895 -> [UART, PM25] Reading data...
19:50:16:896 -> [UART, PM25] Data not available.
19:50:16:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:896 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:896 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:916 -> [UART, PM25] Reading data...
19:50:16:917 -> [UART, PM25] Data not available.
19:50:16:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:917 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:917 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:937 -> [UART, PM25] Reading data...
19:50:16:938 -> [UART, PM25] Data not available.
19:50:16:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:938 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:938 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:958 -> [UART, PM25] Reading data...
19:50:16:959 -> [UART, PM25] Data not available.
19:50:16:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:959 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:959 -> [UART, PM25] Uart available, resetting event queue..
19:50:16:979 -> [UART, PM25] Reading data...
19:50:16:979 -> [UART, PM25] Data not available.
19:50:16:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:16:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:16:979 -> [UART, PM25] Uart available, clearing write errors..
19:50:16:979 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:000 -> [UART, PM25] Reading data...
19:50:17:001 -> [UART, PM25] Data not available.
19:50:17:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:001 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:001 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:021 -> [UART, PM25] Reading data...
19:50:17:022 -> [UART, PM25] Data not available.
19:50:17:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:022 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:022 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:042 -> [UART, PM25] Reading data...
19:50:17:043 -> [UART, PM25] Data not available.
19:50:17:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:043 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:043 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:063 -> [UART, PM25] Reading data...
19:50:17:064 -> [UART, PM25] Data not available.
19:50:17:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:064 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:064 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:084 -> [UART, PM25] Reading data...
19:50:17:085 -> [UART, PM25] Data not available.
19:50:17:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:085 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:085 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:105 -> [UART, PM25] Reading data...
19:50:17:105 -> [UART, PM25] Data not available.
19:50:17:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:106 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:106 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:126 -> [UART, PM25] Reading data...
19:50:17:127 -> [UART, PM25] Data not available.
19:50:17:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:127 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:127 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:147 -> [UART, PM25] Reading data...
19:50:17:148 -> [UART, PM25] Data not available.
19:50:17:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:148 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:148 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:168 -> [UART, PM25] Reading data...
19:50:17:169 -> [UART, PM25] Data not available.
19:50:17:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:169 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:169 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:189 -> [UART, PM25] Reading data...
19:50:17:190 -> [UART, PM25] Data not available.
19:50:17:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:190 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:190 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:225 -> [UART, PM25] Reading data...
19:50:17:235 -> [UART, PM25] Data not available.
19:50:17:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:235 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:235 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:235 -> [UART, PM25] Reading data...
19:50:17:235 -> [UART, PM25] Data not available.
19:50:17:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:235 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:235 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:252 -> [UART, PM25] Reading data...
19:50:17:252 -> [UART, PM25] Data not available.
19:50:17:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:273 -> [UART, PM25] Reading data...
19:50:17:273 -> [UART, PM25] Data not available.
19:50:17:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:294 -> [UART, PM25] Reading data...
19:50:17:294 -> [UART, PM25] Data not available.
19:50:17:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:317 -> [UART, PM25] Reading data...
19:50:17:318 -> [UART, PM25] Data not available.
19:50:17:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:318 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:318 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:336 -> [UART, PM25] Reading data...
19:50:17:336 -> [UART, PM25] Data not available.
19:50:17:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:336 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:336 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:357 -> [UART, PM25] Reading data...
19:50:17:358 -> [UART, PM25] Data not available.
19:50:17:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:358 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:358 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:378 -> [UART, PM25] Reading data...
19:50:17:379 -> [UART, PM25] Data not available.
19:50:17:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:379 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:379 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:399 -> [UART, PM25] Reading data...
19:50:17:399 -> [UART, PM25] Data not available.
19:50:17:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:399 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:399 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:420 -> [UART, PM25] Reading data...
19:50:17:420 -> [UART, PM25] Data not available.
19:50:17:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:421 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:421 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:441 -> [UART, PM25] Reading data...
19:50:17:441 -> [UART, PM25] Data not available.
19:50:17:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:441 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:441 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:464 -> [UART, PM25] Reading data...
19:50:17:465 -> [UART, PM25] Data not available.
19:50:17:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:465 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:465 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:483 -> [UART, PM25] Reading data...
19:50:17:483 -> [UART, PM25] Data not available.
19:50:17:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:483 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:483 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:504 -> [UART, PM25] Reading data...
19:50:17:504 -> [UART, PM25] Data not available.
19:50:17:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:504 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:504 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:534 -> [UART, PM25] Reading data...
19:50:17:535 -> [UART, PM25] Data not available.
19:50:17:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:535 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:535 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:546 -> [UART, PM25] Reading data...
19:50:17:546 -> [UART, PM25] Data not available.
19:50:17:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:567 -> [UART, PM25] Reading data...
19:50:17:567 -> [UART, PM25] Data not available.
19:50:17:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:567 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:567 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:588 -> [UART, PM25] Reading data...
19:50:17:589 -> [UART, PM25] Data not available.
19:50:17:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:589 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:589 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:609 -> [UART, PM25] Reading data...
19:50:17:609 -> [UART, PM25] Data not available.
19:50:17:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:641 -> [UART, PM25] Reading data...
19:50:17:675 -> [UART, PM25] Data not available.
19:50:17:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:675 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:675 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:675 -> [UART, PM25] Reading data...
19:50:17:675 -> [UART, PM25] Data not available.
19:50:17:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:675 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:675 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:675 -> [UART, PM25] Reading data...
19:50:17:675 -> [UART, PM25] Data not available.
19:50:17:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:675 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:675 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:693 -> [UART, PM25] Reading data...
19:50:17:694 -> [UART, PM25] Data not available.
19:50:17:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:694 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:694 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:714 -> [UART, PM25] Reading data...
19:50:17:715 -> [UART, PM25] Data not available.
19:50:17:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:715 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:715 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:735 -> [UART, PM25] Reading data...
19:50:17:735 -> [UART, PM25] Data not available.
19:50:17:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:756 -> [UART, PM25] Reading data...
19:50:17:756 -> [UART, PM25] Data not available.
19:50:17:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:756 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:756 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:777 -> [UART, PM25] Reading data...
19:50:17:777 -> [UART, PM25] Data not available.
19:50:17:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:798 -> [UART, PM25] Reading data...
19:50:17:799 -> [UART, PM25] Data not available.
19:50:17:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:799 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:799 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:821 -> [UART, PM25] Reading data...
19:50:17:821 -> [UART, PM25] Data not available.
19:50:17:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:821 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:821 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:840 -> [UART, PM25] Reading data...
19:50:17:840 -> [UART, PM25] Data not available.
19:50:17:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:840 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:840 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:861 -> [UART, PM25] Reading data...
19:50:17:861 -> [UART, PM25] Data not available.
19:50:17:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:862 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:862 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:882 -> [UART, PM25] Reading data...
19:50:17:883 -> [UART, PM25] Data not available.
19:50:17:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:903 -> [UART, PM25] Reading data...
19:50:17:904 -> [UART, PM25] Data not available.
19:50:17:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:17:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:17:904 -> [UART, PM25] Uart available, clearing write errors..
19:50:17:904 -> [UART, PM25] Uart available, resetting event queue..
19:50:17:904 -> PING!
19:50:18:117 -> [UART, PM25] Reading data...
19:50:18:118 -> [UART, PM25] Data not available.
19:50:18:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:118 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:118 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:138 -> [UART, PM25] Reading data...
19:50:18:138 -> [UART, PM25] Data not available.
19:50:18:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:138 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:138 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:159 -> [UART, PM25] Reading data...
19:50:18:159 -> [UART, PM25] Data not available.
19:50:18:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:160 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:160 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:180 -> [UART, PM25] Reading data...
19:50:18:181 -> [UART, PM25] Data not available.
19:50:18:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:181 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:181 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:201 -> [UART, PM25] Reading data...
19:50:18:202 -> [UART, PM25] Data not available.
19:50:18:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:222 -> [UART, PM25] Reading data...
19:50:18:222 -> [UART, PM25] Data not available.
19:50:18:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:243 -> [UART, PM25] Reading data...
19:50:18:244 -> [UART, PM25] Data not available.
19:50:18:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:244 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:244 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:264 -> [UART, PM25] Reading data...
19:50:18:265 -> [UART, PM25] Data not available.
19:50:18:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:265 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:265 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:285 -> [UART, PM25] Reading data...
19:50:18:285 -> [UART, PM25] Data not available.
19:50:18:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:285 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:285 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:306 -> [UART, PM25] Reading data...
19:50:18:307 -> [UART, PM25] Data not available.
19:50:18:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:307 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:307 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:327 -> [UART, PM25] Reading data...
19:50:18:327 -> [UART, PM25] Data not available.
19:50:18:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:327 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:327 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:348 -> [UART, PM25] Reading data...
19:50:18:348 -> [UART, PM25] Data not available.
19:50:18:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:349 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:349 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:369 -> [UART, PM25] Reading data...
19:50:18:370 -> [UART, PM25] Data not available.
19:50:18:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:370 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:370 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:390 -> [UART, PM25] Reading data...
19:50:18:391 -> [UART, PM25] Data not available.
19:50:18:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:391 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:391 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:411 -> [UART, PM25] Reading data...
19:50:18:412 -> [UART, PM25] Data not available.
19:50:18:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:412 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:412 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:432 -> [UART, PM25] Reading data...
19:50:18:433 -> [UART, PM25] Data not available.
19:50:18:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:433 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:433 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:453 -> [UART, PM25] Reading data...
19:50:18:453 -> [UART, PM25] Data not available.
19:50:18:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:454 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:454 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:474 -> [UART, PM25] Reading data...
19:50:18:475 -> [UART, PM25] Data not available.
19:50:18:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:475 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:475 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:495 -> [UART, PM25] Reading data...
19:50:18:496 -> [UART, PM25] Data not available.
19:50:18:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:516 -> [UART, PM25] Reading data...
19:50:18:517 -> [UART, PM25] Data not available.
19:50:18:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:517 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:517 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:537 -> [UART, PM25] Reading data...
19:50:18:538 -> [UART, PM25] Data not available.
19:50:18:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:538 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:538 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:558 -> [UART, PM25] Reading data...
19:50:18:569 -> [UART, PM25] Data not available.
19:50:18:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:569 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:569 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:579 -> [UART, PM25] Reading data...
19:50:18:580 -> [UART, PM25] Data not available.
19:50:18:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:580 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:580 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:600 -> [UART, PM25] Reading data...
19:50:18:601 -> [UART, PM25] Data not available.
19:50:18:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:621 -> [UART, PM25] Reading data...
19:50:18:622 -> [UART, PM25] Data not available.
19:50:18:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:622 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:622 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:642 -> [UART, PM25] Reading data...
19:50:18:643 -> [UART, PM25] Data not available.
19:50:18:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:643 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:643 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:663 -> [UART, PM25] Reading data...
19:50:18:664 -> [UART, PM25] Data not available.
19:50:18:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:664 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:664 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:684 -> [UART, PM25] Reading data...
19:50:18:685 -> [UART, PM25] Data not available.
19:50:18:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:705 -> [UART, PM25] Reading data...
19:50:18:706 -> [UART, PM25] Data not available.
19:50:18:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:706 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:706 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:726 -> [UART, PM25] Reading data...
19:50:18:727 -> [UART, PM25] Data not available.
19:50:18:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:727 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:727 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:747 -> [UART, PM25] Reading data...
19:50:18:748 -> [UART, PM25] Data not available.
19:50:18:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:748 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:748 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:768 -> [UART, PM25] Reading data...
19:50:18:768 -> [UART, PM25] Data not available.
19:50:18:768 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:768 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:768 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:768 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:789 -> [UART, PM25] Reading data...
19:50:18:789 -> [UART, PM25] Data not available.
19:50:18:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:789 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:789 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:810 -> [UART, PM25] Reading data...
19:50:18:811 -> [UART, PM25] Data not available.
19:50:18:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:811 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:811 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:831 -> [UART, PM25] Reading data...
19:50:18:831 -> [UART, PM25] Data not available.
19:50:18:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:831 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:831 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:852 -> [UART, PM25] Reading data...
19:50:18:852 -> [UART, PM25] Data not available.
19:50:18:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:853 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:853 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:873 -> [UART, PM25] Reading data...
19:50:18:873 -> [UART, PM25] Data not available.
19:50:18:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:874 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:874 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:894 -> [UART, PM25] Reading data...
19:50:18:894 -> [UART, PM25] Data not available.
19:50:18:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:894 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:894 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:915 -> [UART, PM25] Reading data...
19:50:18:916 -> [UART, PM25] Data not available.
19:50:18:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:916 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:916 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:936 -> [UART, PM25] Reading data...
19:50:18:937 -> [UART, PM25] Data not available.
19:50:18:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:937 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:937 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:957 -> [UART, PM25] Reading data...
19:50:18:957 -> [UART, PM25] Data not available.
19:50:18:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:957 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:957 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:978 -> [UART, PM25] Reading data...
19:50:18:979 -> [UART, PM25] Data not available.
19:50:18:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:18:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:18:979 -> [UART, PM25] Uart available, clearing write errors..
19:50:18:979 -> [UART, PM25] Uart available, resetting event queue..
19:50:18:999 -> [UART, PM25] Reading data...
19:50:19:000 -> [UART, PM25] Data not available.
19:50:19:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:000 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:000 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:020 -> [UART, PM25] Reading data...
19:50:19:021 -> [UART, PM25] Data not available.
19:50:19:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:021 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:021 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:049 -> [UART, PM25] Reading data...
19:50:19:090 -> [UART, PM25] Data not available.
19:50:19:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:090 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:090 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:090 -> [UART, PM25] Reading data...
19:50:19:090 -> [UART, PM25] Data not available.
19:50:19:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:090 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:090 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:093 -> [UART, PM25] Reading data...
19:50:19:093 -> [UART, PM25] Data not available.
19:50:19:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:093 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:093 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:104 -> [UART, PM25] Reading data...
19:50:19:104 -> [UART, PM25] Data not available.
19:50:19:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:104 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:104 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:125 -> [UART, PM25] Reading data...
19:50:19:126 -> [UART, PM25] Data not available.
19:50:19:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:126 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:126 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:146 -> [UART, PM25] Reading data...
19:50:19:146 -> [UART, PM25] Data not available.
19:50:19:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:146 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:146 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:167 -> [UART, PM25] Reading data...
19:50:19:167 -> [UART, PM25] Data not available.
19:50:19:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:167 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:167 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:188 -> [UART, PM25] Reading data...
19:50:19:188 -> [UART, PM25] Data not available.
19:50:19:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:188 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:188 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:209 -> [UART, PM25] Reading data...
19:50:19:209 -> [UART, PM25] Data not available.
19:50:19:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:209 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:209 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:234 -> [UART, PM25] Reading data...
19:50:19:234 -> [UART, PM25] Data not available.
19:50:19:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:234 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:234 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:251 -> [UART, PM25] Reading data...
19:50:19:252 -> [UART, PM25] Data not available.
19:50:19:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:272 -> [UART, PM25] Reading data...
19:50:19:272 -> [UART, PM25] Data not available.
19:50:19:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:293 -> [UART, PM25] Reading data...
19:50:19:294 -> [UART, PM25] Data not available.
19:50:19:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:314 -> [UART, PM25] Reading data...
19:50:19:315 -> [UART, PM25] Data not available.
19:50:19:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:315 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:315 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:335 -> [UART, PM25] Reading data...
19:50:19:335 -> [UART, PM25] Data not available.
19:50:19:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:335 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:335 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:356 -> [UART, PM25] Reading data...
19:50:19:357 -> [UART, PM25] Data not available.
19:50:19:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:357 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:357 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:377 -> [UART, PM25] Reading data...
19:50:19:378 -> [UART, PM25] Data not available.
19:50:19:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:378 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:378 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:398 -> [UART, PM25] Reading data...
19:50:19:398 -> [UART, PM25] Data not available.
19:50:19:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:398 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:398 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:419 -> [UART, PM25] Reading data...
19:50:19:420 -> [UART, PM25] Data not available.
19:50:19:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:420 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:420 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:440 -> [UART, PM25] Reading data...
19:50:19:440 -> [UART, PM25] Data not available.
19:50:19:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:440 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:440 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:461 -> [UART, PM25] Reading data...
19:50:19:462 -> [UART, PM25] Data not available.
19:50:19:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:482 -> [UART, PM25] Reading data...
19:50:19:482 -> [UART, PM25] Data not available.
19:50:19:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:482 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:482 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:506 -> [UART, PM25] Reading data...
19:50:19:507 -> [UART, PM25] Data not available.
19:50:19:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:507 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:507 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:524 -> [UART, PM25] Reading data...
19:50:19:525 -> [UART, PM25] Data not available.
19:50:19:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:545 -> [UART, PM25] Reading data...
19:50:19:546 -> [UART, PM25] Data not available.
19:50:19:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:566 -> [UART, PM25] Reading data...
19:50:19:567 -> [UART, PM25] Data not available.
19:50:19:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:567 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:567 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:587 -> [UART, PM25] Reading data...
19:50:19:587 -> [UART, PM25] Data not available.
19:50:19:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:587 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:587 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:608 -> [UART, PM25] Reading data...
19:50:19:608 -> [UART, PM25] Data not available.
19:50:19:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:629 -> [UART, PM25] Reading data...
19:50:19:630 -> [UART, PM25] Data not available.
19:50:19:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:650 -> [UART, PM25] Reading data...
19:50:19:651 -> [UART, PM25] Data not available.
19:50:19:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:651 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:651 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:671 -> [UART, PM25] Reading data...
19:50:19:671 -> [UART, PM25] Data not available.
19:50:19:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:671 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:671 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:692 -> [UART, PM25] Reading data...
19:50:19:692 -> [UART, PM25] Data not available.
19:50:19:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:693 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:693 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:713 -> [UART, PM25] Reading data...
19:50:19:714 -> [UART, PM25] Data not available.
19:50:19:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:714 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:714 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:735 -> [UART, PM25] Reading data...
19:50:19:735 -> [UART, PM25] Data not available.
19:50:19:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:755 -> [UART, PM25] Reading data...
19:50:19:755 -> [UART, PM25] Data not available.
19:50:19:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:755 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:755 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:776 -> [UART, PM25] Reading data...
19:50:19:777 -> [UART, PM25] Data not available.
19:50:19:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:797 -> [UART, PM25] Reading data...
19:50:19:798 -> [UART, PM25] Data not available.
19:50:19:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:818 -> [UART, PM25] Reading data...
19:50:19:819 -> [UART, PM25] Data not available.
19:50:19:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:839 -> [UART, PM25] Reading data...
19:50:19:840 -> [UART, PM25] Data not available.
19:50:19:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:840 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:840 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:860 -> [UART, PM25] Reading data...
19:50:19:861 -> [UART, PM25] Data not available.
19:50:19:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:861 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:861 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:881 -> [UART, PM25] Reading data...
19:50:19:881 -> [UART, PM25] Data not available.
19:50:19:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:881 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:881 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:902 -> [UART, PM25] Reading data...
19:50:19:903 -> [UART, PM25] Data not available.
19:50:19:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:903 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:903 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:923 -> [UART, PM25] Reading data...
19:50:19:924 -> [UART, PM25] Data not available.
19:50:19:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:944 -> [UART, PM25] Reading data...
19:50:19:944 -> [UART, PM25] Data not available.
19:50:19:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:944 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:944 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:965 -> [UART, PM25] Reading data...
19:50:19:966 -> [UART, PM25] Data not available.
19:50:19:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:19:986 -> [UART, PM25] Reading data...
19:50:19:987 -> [UART, PM25] Data not available.
19:50:19:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:19:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:19:987 -> [UART, PM25] Uart available, clearing write errors..
19:50:19:987 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:007 -> [UART, PM25] Reading data...
19:50:20:008 -> [UART, PM25] Data not available.
19:50:20:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:008 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:008 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:028 -> [UART, PM25] Reading data...
19:50:20:029 -> [UART, PM25] Data not available.
19:50:20:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:029 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:029 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:049 -> [UART, PM25] Reading data...
19:50:20:050 -> [UART, PM25] Data not available.
19:50:20:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:050 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:050 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:070 -> [UART, PM25] Reading data...
19:50:20:070 -> [UART, PM25] Data not available.
19:50:20:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:070 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:070 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:091 -> [UART, PM25] Reading data...
19:50:20:091 -> [UART, PM25] Data not available.
19:50:20:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:091 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:091 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:123 -> [UART, PM25] Reading data...
19:50:20:124 -> [UART, PM25] Data not available.
19:50:20:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:124 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:124 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:133 -> [UART, PM25] Reading data...
19:50:20:133 -> [UART, PM25] Data not available.
19:50:20:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:134 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:134 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:154 -> [UART, PM25] Reading data...
19:50:20:155 -> [UART, PM25] Data not available.
19:50:20:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:155 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:155 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:175 -> [UART, PM25] Reading data...
19:50:20:175 -> [UART, PM25] Data not available.
19:50:20:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:175 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:175 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:196 -> [UART, PM25] Reading data...
19:50:20:197 -> [UART, PM25] Data not available.
19:50:20:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:197 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:197 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:220 -> [UART, PM25] Reading data...
19:50:20:221 -> [UART, PM25] Data not available.
19:50:20:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:221 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:221 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:238 -> [UART, PM25] Reading data...
19:50:20:238 -> [UART, PM25] Data not available.
19:50:20:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:238 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:238 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:259 -> [UART, PM25] Reading data...
19:50:20:259 -> [UART, PM25] Data not available.
19:50:20:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:259 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:259 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:280 -> [UART, PM25] Reading data...
19:50:20:281 -> [UART, PM25] Data not available.
19:50:20:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:281 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:281 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:301 -> [UART, PM25] Reading data...
19:50:20:302 -> [UART, PM25] Data not available.
19:50:20:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:322 -> [UART, PM25] Reading data...
19:50:20:322 -> [UART, PM25] Data not available.
19:50:20:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:322 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:322 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:343 -> [UART, PM25] Reading data...
19:50:20:343 -> [UART, PM25] Data not available.
19:50:20:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:343 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:343 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:364 -> [UART, PM25] Reading data...
19:50:20:365 -> [UART, PM25] Data not available.
19:50:20:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:365 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:365 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:385 -> [UART, PM25] Reading data...
19:50:20:386 -> [UART, PM25] Data not available.
19:50:20:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:386 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:386 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:406 -> [UART, PM25] Reading data...
19:50:20:406 -> [UART, PM25] Data not available.
19:50:20:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:406 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:406 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:427 -> [UART, PM25] Reading data...
19:50:20:427 -> [UART, PM25] Data not available.
19:50:20:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:427 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:427 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:448 -> [UART, PM25] Reading data...
19:50:20:449 -> [UART, PM25] Data not available.
19:50:20:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:449 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:449 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:469 -> [UART, PM25] Reading data...
19:50:20:469 -> [UART, PM25] Data not available.
19:50:20:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:469 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:469 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:490 -> [UART, PM25] Reading data...
19:50:20:490 -> [UART, PM25] Data not available.
19:50:20:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:490 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:490 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:511 -> [UART, PM25] Reading data...
19:50:20:512 -> [UART, PM25] Data not available.
19:50:20:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:512 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:512 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:532 -> [UART, PM25] Reading data...
19:50:20:532 -> [UART, PM25] Data not available.
19:50:20:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:532 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:532 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:553 -> [UART, PM25] Reading data...
19:50:20:554 -> [UART, PM25] Data not available.
19:50:20:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:554 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:554 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:575 -> [UART, PM25] Reading data...
19:50:20:575 -> [UART, PM25] Data not available.
19:50:20:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:575 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:575 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:595 -> [UART, PM25] Reading data...
19:50:20:595 -> [UART, PM25] Data not available.
19:50:20:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:595 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:595 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:616 -> [UART, PM25] Reading data...
19:50:20:617 -> [UART, PM25] Data not available.
19:50:20:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:637 -> [UART, PM25] Reading data...
19:50:20:638 -> [UART, PM25] Data not available.
19:50:20:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:638 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:638 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:658 -> [UART, PM25] Reading data...
19:50:20:658 -> [UART, PM25] Data not available.
19:50:20:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:658 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:658 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:679 -> [UART, PM25] Reading data...
19:50:20:679 -> [UART, PM25] Data not available.
19:50:20:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:679 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:679 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:700 -> [UART, PM25] Reading data...
19:50:20:701 -> [UART, PM25] Data not available.
19:50:20:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:701 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:701 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:721 -> [UART, PM25] Reading data...
19:50:20:721 -> [UART, PM25] Data not available.
19:50:20:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:721 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:721 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:742 -> [UART, PM25] Reading data...
19:50:20:742 -> [UART, PM25] Data not available.
19:50:20:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:742 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:742 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:763 -> [UART, PM25] Reading data...
19:50:20:764 -> [UART, PM25] Data not available.
19:50:20:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:764 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:764 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:804 -> [UART, PM25] Reading data...
19:50:20:808 -> [UART, PM25] Data not available.
19:50:20:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:808 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:808 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:808 -> [UART, PM25] Reading data...
19:50:20:808 -> [UART, PM25] Data not available.
19:50:20:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:808 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:808 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:826 -> [UART, PM25] Reading data...
19:50:20:826 -> [UART, PM25] Data not available.
19:50:20:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:826 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:826 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:847 -> [UART, PM25] Reading data...
19:50:20:848 -> [UART, PM25] Data not available.
19:50:20:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:848 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:848 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:868 -> [UART, PM25] Reading data...
19:50:20:869 -> [UART, PM25] Data not available.
19:50:20:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:869 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:869 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:889 -> [UART, PM25] Reading data...
19:50:20:889 -> [UART, PM25] Data not available.
19:50:20:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:889 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:889 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:910 -> [UART, PM25] Reading data...
19:50:20:910 -> [UART, PM25] Data not available.
19:50:20:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:910 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:910 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:931 -> [UART, PM25] Reading data...
19:50:20:931 -> [UART, PM25] Data not available.
19:50:20:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:931 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:931 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:952 -> [UART, PM25] Reading data...
19:50:20:953 -> [UART, PM25] Data not available.
19:50:20:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:953 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:953 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:973 -> [UART, PM25] Reading data...
19:50:20:973 -> [UART, PM25] Data not available.
19:50:20:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:973 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:973 -> [UART, PM25] Uart available, resetting event queue..
19:50:20:994 -> [UART, PM25] Reading data...
19:50:20:994 -> [UART, PM25] Data not available.
19:50:20:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:20:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:20:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:20:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:015 -> [UART, PM25] Reading data...
19:50:21:015 -> [UART, PM25] Data not available.
19:50:21:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:015 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:015 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:036 -> [UART, PM25] Reading data...
19:50:21:036 -> [UART, PM25] Data not available.
19:50:21:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:036 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:036 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:057 -> [UART, PM25] Reading data...
19:50:21:058 -> [UART, PM25] Data not available.
19:50:21:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:058 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:058 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:078 -> [UART, PM25] Reading data...
19:50:21:079 -> [UART, PM25] Data not available.
19:50:21:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:079 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:079 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:099 -> [UART, PM25] Reading data...
19:50:21:099 -> [UART, PM25] Data not available.
19:50:21:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:099 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:099 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:120 -> [UART, PM25] Reading data...
19:50:21:120 -> [UART, PM25] Data not available.
19:50:21:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:120 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:120 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:153 -> [UART, PM25] Reading data...
19:50:21:153 -> [UART, PM25] Data not available.
19:50:21:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:155 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:155 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:162 -> [UART, PM25] Reading data...
19:50:21:162 -> [UART, PM25] Data not available.
19:50:21:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:163 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:163 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:183 -> [UART, PM25] Reading data...
19:50:21:184 -> [UART, PM25] Data not available.
19:50:21:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:184 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:184 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:204 -> [UART, PM25] Reading data...
19:50:21:204 -> [UART, PM25] Data not available.
19:50:21:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:205 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:205 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:225 -> [UART, PM25] Reading data...
19:50:21:225 -> [UART, PM25] Data not available.
19:50:21:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:225 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:225 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:246 -> [UART, PM25] Reading data...
19:50:21:246 -> [UART, PM25] Data not available.
19:50:21:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:246 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:246 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:267 -> [UART, PM25] Reading data...
19:50:21:268 -> [UART, PM25] Data not available.
19:50:21:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:268 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:268 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:288 -> [UART, PM25] Reading data...
19:50:21:288 -> [UART, PM25] Data not available.
19:50:21:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:288 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:288 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:309 -> [UART, PM25] Reading data...
19:50:21:310 -> [UART, PM25] Data not available.
19:50:21:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:310 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:310 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:330 -> [UART, PM25] Reading data...
19:50:21:330 -> [UART, PM25] Data not available.
19:50:21:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:331 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:331 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:351 -> [UART, PM25] Reading data...
19:50:21:352 -> [UART, PM25] Data not available.
19:50:21:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:352 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:352 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:372 -> [UART, PM25] Reading data...
19:50:21:373 -> [UART, PM25] Data not available.
19:50:21:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:373 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:373 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:393 -> [UART, PM25] Reading data...
19:50:21:393 -> [UART, PM25] Data not available.
19:50:21:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:393 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:393 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:414 -> [UART, PM25] Reading data...
19:50:21:414 -> [UART, PM25] Data not available.
19:50:21:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:414 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:414 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:435 -> [UART, PM25] Reading data...
19:50:21:436 -> [UART, PM25] Data not available.
19:50:21:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:436 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:436 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:456 -> [UART, PM25] Reading data...
19:50:21:456 -> [UART, PM25] Data not available.
19:50:21:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:456 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:456 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:477 -> [UART, PM25] Reading data...
19:50:21:478 -> [UART, PM25] Data not available.
19:50:21:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:478 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:478 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:498 -> [UART, PM25] Reading data...
19:50:21:498 -> [UART, PM25] Data not available.
19:50:21:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:498 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:498 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:519 -> [UART, PM25] Reading data...
19:50:21:520 -> [UART, PM25] Data not available.
19:50:21:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:520 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:520 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:540 -> [UART, PM25] Reading data...
19:50:21:540 -> [UART, PM25] Data not available.
19:50:21:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:540 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:540 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:561 -> [UART, PM25] Reading data...
19:50:21:561 -> [UART, PM25] Data not available.
19:50:21:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:561 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:561 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:582 -> [UART, PM25] Reading data...
19:50:21:582 -> [UART, PM25] Data not available.
19:50:21:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:583 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:583 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:603 -> [UART, PM25] Reading data...
19:50:21:604 -> [UART, PM25] Data not available.
19:50:21:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:604 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:604 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:624 -> [UART, PM25] Reading data...
19:50:21:627 -> [UART, PM25] Data not available.
19:50:21:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:627 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:627 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:645 -> [UART, PM25] Reading data...
19:50:21:645 -> [UART, PM25] Data not available.
19:50:21:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:645 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:645 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:670 -> [UART, PM25] Reading data...
19:50:21:671 -> [UART, PM25] Data not available.
19:50:21:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:671 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:671 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:687 -> [UART, PM25] Reading data...
19:50:21:688 -> [UART, PM25] Data not available.
19:50:21:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:688 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:688 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:708 -> [UART, PM25] Reading data...
19:50:21:708 -> [UART, PM25] Data not available.
19:50:21:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:708 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:708 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:729 -> [UART, PM25] Reading data...
19:50:21:729 -> [UART, PM25] Data not available.
19:50:21:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:729 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:729 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:750 -> [UART, PM25] Reading data...
19:50:21:750 -> [UART, PM25] Data not available.
19:50:21:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:750 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:750 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:771 -> [UART, PM25] Reading data...
19:50:21:772 -> [UART, PM25] Data not available.
19:50:21:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:772 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:772 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:792 -> [UART, PM25] Reading data...
19:50:21:793 -> [UART, PM25] Data not available.
19:50:21:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:793 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:793 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:813 -> [UART, PM25] Reading data...
19:50:21:813 -> [UART, PM25] Data not available.
19:50:21:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:813 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:813 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:834 -> [UART, PM25] Reading data...
19:50:21:835 -> [UART, PM25] Data not available.
19:50:21:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:835 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:835 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:855 -> [UART, PM25] Reading data...
19:50:21:856 -> [UART, PM25] Data not available.
19:50:21:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:856 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:856 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:876 -> [UART, PM25] Reading data...
19:50:21:877 -> [UART, PM25] Data not available.
19:50:21:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:877 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:877 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:897 -> [UART, PM25] Reading data...
19:50:21:898 -> [UART, PM25] Data not available.
19:50:21:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:898 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:898 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:918 -> [UART, PM25] Reading data...
19:50:21:919 -> [UART, PM25] Data not available.
19:50:21:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:919 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:919 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:939 -> [UART, PM25] Reading data...
19:50:21:939 -> [UART, PM25] Data not available.
19:50:21:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:939 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:939 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:960 -> [UART, PM25] Reading data...
19:50:21:960 -> [UART, PM25] Data not available.
19:50:21:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:960 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:960 -> [UART, PM25] Uart available, resetting event queue..
19:50:21:981 -> [UART, PM25] Reading data...
19:50:21:982 -> [UART, PM25] Data not available.
19:50:21:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:21:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:21:982 -> [UART, PM25] Uart available, clearing write errors..
19:50:21:982 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:002 -> [UART, PM25] Reading data...
19:50:22:003 -> [UART, PM25] Data not available.
19:50:22:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:003 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:003 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:023 -> [UART, PM25] Reading data...
19:50:22:023 -> [UART, PM25] Data not available.
19:50:22:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:023 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:023 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:044 -> [UART, PM25] Reading data...
19:50:22:045 -> [UART, PM25] Data not available.
19:50:22:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:045 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:045 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:065 -> [UART, PM25] Reading data...
19:50:22:065 -> [UART, PM25] Data not available.
19:50:22:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:066 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:066 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:086 -> [UART, PM25] Reading data...
19:50:22:087 -> [UART, PM25] Data not available.
19:50:22:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:087 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:087 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:107 -> [UART, PM25] Reading data...
19:50:22:108 -> [UART, PM25] Data not available.
19:50:22:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:108 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:108 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:129 -> [UART, PM25] Reading data...
19:50:22:129 -> [UART, PM25] Data not available.
19:50:22:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:129 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:129 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:149 -> [UART, PM25] Reading data...
19:50:22:149 -> [UART, PM25] Data not available.
19:50:22:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:149 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:149 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:181 -> [UART, PM25] Reading data...
19:50:22:182 -> [UART, PM25] Data not available.
19:50:22:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:182 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:182 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:191 -> [UART, PM25] Reading data...
19:50:22:191 -> [UART, PM25] Data not available.
19:50:22:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:192 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:192 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:212 -> [UART, PM25] Reading data...
19:50:22:212 -> [UART, PM25] Data not available.
19:50:22:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:212 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:212 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:233 -> [UART, PM25] Reading data...
19:50:22:234 -> [UART, PM25] Data not available.
19:50:22:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:234 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:234 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:254 -> [UART, PM25] Reading data...
19:50:22:254 -> [UART, PM25] Data not available.
19:50:22:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:255 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:255 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:275 -> [UART, PM25] Reading data...
19:50:22:275 -> [UART, PM25] Data not available.
19:50:22:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:275 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:275 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:296 -> [UART, PM25] Reading data...
19:50:22:297 -> [UART, PM25] Data not available.
19:50:22:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:297 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:297 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:317 -> [UART, PM25] Reading data...
19:50:22:317 -> [UART, PM25] Data not available.
19:50:22:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:317 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:317 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:338 -> [UART, PM25] Reading data...
19:50:22:338 -> [UART, PM25] Data not available.
19:50:22:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:338 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:338 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:359 -> [UART, PM25] Reading data...
19:50:22:359 -> [UART, PM25] Data not available.
19:50:22:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:359 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:359 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:380 -> [UART, PM25] Reading data...
19:50:22:380 -> [UART, PM25] Data not available.
19:50:22:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:380 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:380 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:401 -> [UART, PM25] Reading data...
19:50:22:401 -> [UART, PM25] Data not available.
19:50:22:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:402 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:402 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:422 -> [UART, PM25] Reading data...
19:50:22:422 -> [UART, PM25] Data not available.
19:50:22:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:422 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:422 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:443 -> [UART, PM25] Reading data...
19:50:22:443 -> [UART, PM25] Data not available.
19:50:22:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:443 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:443 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:464 -> [UART, PM25] Reading data...
19:50:22:465 -> [UART, PM25] Data not available.
19:50:22:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:465 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:465 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:485 -> [UART, PM25] Reading data...
19:50:22:485 -> [UART, PM25] Data not available.
19:50:22:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:485 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:485 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:506 -> [UART, PM25] Reading data...
19:50:22:506 -> [UART, PM25] Data not available.
19:50:22:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:506 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:506 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:527 -> [UART, PM25] Reading data...
19:50:22:527 -> [UART, PM25] Data not available.
19:50:22:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:527 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:527 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:548 -> [UART, PM25] Reading data...
19:50:22:549 -> [UART, PM25] Data not available.
19:50:22:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:549 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:549 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:569 -> [UART, PM25] Reading data...
19:50:22:569 -> [UART, PM25] Data not available.
19:50:22:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:569 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:569 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:590 -> [UART, PM25] Reading data...
19:50:22:591 -> [UART, PM25] Data not available.
19:50:22:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:591 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:591 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:611 -> [UART, PM25] Reading data...
19:50:22:612 -> [UART, PM25] Data not available.
19:50:22:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:612 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:612 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:612 -> PING!
19:50:22:825 -> [UART, PM25] Reading data...
19:50:22:826 -> [UART, PM25] Data not available.
19:50:22:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:826 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:826 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:846 -> [UART, PM25] Reading data...
19:50:22:847 -> [UART, PM25] Data not available.
19:50:22:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:847 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:847 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:867 -> [UART, PM25] Reading data...
19:50:22:867 -> [UART, PM25] Data not available.
19:50:22:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:868 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:868 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:888 -> [UART, PM25] Reading data...
19:50:22:888 -> [UART, PM25] Data not available.
19:50:22:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:888 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:888 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:909 -> [UART, PM25] Reading data...
19:50:22:910 -> [UART, PM25] Data not available.
19:50:22:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:910 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:910 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:930 -> [UART, PM25] Reading data...
19:50:22:930 -> [UART, PM25] Data not available.
19:50:22:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:931 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:931 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:951 -> [UART, PM25] Reading data...
19:50:22:952 -> [UART, PM25] Data not available.
19:50:22:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:952 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:952 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:972 -> [UART, PM25] Reading data...
19:50:22:973 -> [UART, PM25] Data not available.
19:50:22:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:973 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:973 -> [UART, PM25] Uart available, resetting event queue..
19:50:22:993 -> [UART, PM25] Reading data...
19:50:22:993 -> [UART, PM25] Data not available.
19:50:22:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:22:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:22:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:22:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:014 -> [UART, PM25] Reading data...
19:50:23:014 -> [UART, PM25] Data not available.
19:50:23:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:014 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:014 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:035 -> [UART, PM25] Reading data...
19:50:23:035 -> [UART, PM25] Data not available.
19:50:23:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:035 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:035 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:056 -> [UART, PM25] Reading data...
19:50:23:056 -> [UART, PM25] Data not available.
19:50:23:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:057 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:057 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:077 -> [UART, PM25] Reading data...
19:50:23:077 -> [UART, PM25] Data not available.
19:50:23:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:077 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:077 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:098 -> [UART, PM25] Reading data...
19:50:23:099 -> [UART, PM25] Data not available.
19:50:23:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:099 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:099 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:119 -> [UART, PM25] Reading data...
19:50:23:119 -> [UART, PM25] Data not available.
19:50:23:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:119 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:119 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:140 -> [UART, PM25] Reading data...
19:50:23:140 -> [UART, PM25] Data not available.
19:50:23:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:161 -> [UART, PM25] Reading data...
19:50:23:162 -> [UART, PM25] Data not available.
19:50:23:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:162 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:162 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:182 -> [UART, PM25] Reading data...
19:50:23:182 -> [UART, PM25] Data not available.
19:50:23:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:182 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:182 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:203 -> [UART, PM25] Reading data...
19:50:23:204 -> [UART, PM25] Data not available.
19:50:23:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:204 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:204 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:225 -> [UART, PM25] Reading data...
19:50:23:226 -> [UART, PM25] Data not available.
19:50:23:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:226 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:226 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:245 -> [UART, PM25] Reading data...
19:50:23:245 -> [UART, PM25] Data not available.
19:50:23:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:246 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:246 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:266 -> [UART, PM25] Reading data...
19:50:23:267 -> [UART, PM25] Data not available.
19:50:23:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:267 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:267 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:288 -> [UART, PM25] Reading data...
19:50:23:288 -> [UART, PM25] Data not available.
19:50:23:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:288 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:288 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:308 -> [UART, PM25] Reading data...
19:50:23:309 -> [UART, PM25] Data not available.
19:50:23:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:309 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:309 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:329 -> [UART, PM25] Reading data...
19:50:23:330 -> [UART, PM25] Data not available.
19:50:23:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:330 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:330 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:350 -> [UART, PM25] Reading data...
19:50:23:351 -> [UART, PM25] Data not available.
19:50:23:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:351 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:351 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:371 -> [UART, PM25] Reading data...
19:50:23:371 -> [UART, PM25] Data not available.
19:50:23:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:371 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:371 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:392 -> [UART, PM25] Reading data...
19:50:23:393 -> [UART, PM25] Data not available.
19:50:23:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:393 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:393 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:413 -> [UART, PM25] Reading data...
19:50:23:414 -> [UART, PM25] Data not available.
19:50:23:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:414 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:414 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:434 -> [UART, PM25] Reading data...
19:50:23:435 -> [UART, PM25] Data not available.
19:50:23:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:435 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:435 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:455 -> [UART, PM25] Reading data...
19:50:23:456 -> [UART, PM25] Data not available.
19:50:23:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:456 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:456 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:476 -> [UART, PM25] Reading data...
19:50:23:477 -> [UART, PM25] Data not available.
19:50:23:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:477 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:477 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:497 -> [UART, PM25] Reading data...
19:50:23:498 -> [UART, PM25] Data not available.
19:50:23:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:498 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:498 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:518 -> [UART, PM25] Reading data...
19:50:23:519 -> [UART, PM25] Data not available.
19:50:23:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:519 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:519 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:539 -> [UART, PM25] Reading data...
19:50:23:539 -> [UART, PM25] Data not available.
19:50:23:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:539 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:539 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:560 -> [UART, PM25] Reading data...
19:50:23:560 -> [UART, PM25] Data not available.
19:50:23:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:561 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:561 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:581 -> [UART, PM25] Reading data...
19:50:23:581 -> [UART, PM25] Data not available.
19:50:23:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:581 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:581 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:602 -> [UART, PM25] Reading data...
19:50:23:603 -> [UART, PM25] Data not available.
19:50:23:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:603 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:603 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:623 -> [UART, PM25] Reading data...
19:50:23:623 -> [UART, PM25] Data not available.
19:50:23:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:623 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:623 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:644 -> [UART, PM25] Reading data...
19:50:23:644 -> [UART, PM25] Data not available.
19:50:23:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:644 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:644 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:665 -> [UART, PM25] Reading data...
19:50:23:665 -> [UART, PM25] Data not available.
19:50:23:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:665 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:665 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:686 -> [UART, PM25] Reading data...
19:50:23:686 -> [UART, PM25] Data not available.
19:50:23:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:686 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:686 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:707 -> [UART, PM25] Reading data...
19:50:23:707 -> [UART, PM25] Data not available.
19:50:23:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:707 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:707 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:735 -> [UART, PM25] Reading data...
19:50:23:735 -> [UART, PM25] Data not available.
19:50:23:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:749 -> [UART, PM25] Reading data...
19:50:23:750 -> [UART, PM25] Data not available.
19:50:23:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:750 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:750 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:770 -> [UART, PM25] Reading data...
19:50:23:770 -> [UART, PM25] Data not available.
19:50:23:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:770 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:770 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:791 -> [UART, PM25] Reading data...
19:50:23:791 -> [UART, PM25] Data not available.
19:50:23:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:791 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:791 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:812 -> [UART, PM25] Reading data...
19:50:23:812 -> [UART, PM25] Data not available.
19:50:23:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:812 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:812 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:833 -> [UART, PM25] Reading data...
19:50:23:833 -> [UART, PM25] Data not available.
19:50:23:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:833 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:833 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:854 -> [UART, PM25] Reading data...
19:50:23:854 -> [UART, PM25] Data not available.
19:50:23:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:854 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:854 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:875 -> [UART, PM25] Reading data...
19:50:23:875 -> [UART, PM25] Data not available.
19:50:23:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:875 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:875 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:896 -> [UART, PM25] Reading data...
19:50:23:896 -> [UART, PM25] Data not available.
19:50:23:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:896 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:896 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:917 -> [UART, PM25] Reading data...
19:50:23:917 -> [UART, PM25] Data not available.
19:50:23:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:917 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:917 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:938 -> [UART, PM25] Reading data...
19:50:23:938 -> [UART, PM25] Data not available.
19:50:23:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:938 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:938 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:959 -> [UART, PM25] Reading data...
19:50:23:959 -> [UART, PM25] Data not available.
19:50:23:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:959 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:959 -> [UART, PM25] Uart available, resetting event queue..
19:50:23:980 -> [UART, PM25] Reading data...
19:50:23:980 -> [UART, PM25] Data not available.
19:50:23:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:23:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:23:980 -> [UART, PM25] Uart available, clearing write errors..
19:50:23:980 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:001 -> [UART, PM25] Reading data...
19:50:24:001 -> [UART, PM25] Data not available.
19:50:24:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:001 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:001 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:022 -> [UART, PM25] Reading data...
19:50:24:022 -> [UART, PM25] Data not available.
19:50:24:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:022 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:022 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:043 -> [UART, PM25] Reading data...
19:50:24:043 -> [UART, PM25] Data not available.
19:50:24:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:043 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:043 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:064 -> [UART, PM25] Reading data...
19:50:24:064 -> [UART, PM25] Data not available.
19:50:24:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:064 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:064 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:085 -> [UART, PM25] Reading data...
19:50:24:085 -> [UART, PM25] Data not available.
19:50:24:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:085 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:085 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:107 -> [UART, PM25] Reading data...
19:50:24:141 -> [UART, PM25] Data not available.
19:50:24:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:141 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:141 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:141 -> [UART, PM25] Reading data...
19:50:24:141 -> [UART, PM25] Data not available.
19:50:24:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:141 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:141 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:148 -> [UART, PM25] Reading data...
19:50:24:148 -> [UART, PM25] Data not available.
19:50:24:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:148 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:148 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:169 -> [UART, PM25] Reading data...
19:50:24:169 -> [UART, PM25] Data not available.
19:50:24:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:169 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:169 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:190 -> [UART, PM25] Reading data...
19:50:24:190 -> [UART, PM25] Data not available.
19:50:24:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:190 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:190 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:211 -> [UART, PM25] Reading data...
19:50:24:211 -> [UART, PM25] Data not available.
19:50:24:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:211 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:211 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:232 -> [UART, PM25] Reading data...
19:50:24:232 -> [UART, PM25] Data not available.
19:50:24:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:232 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:232 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:253 -> [UART, PM25] Reading data...
19:50:24:253 -> [UART, PM25] Data not available.
19:50:24:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:253 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:253 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:274 -> [UART, PM25] Reading data...
19:50:24:274 -> [UART, PM25] Data not available.
19:50:24:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:274 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:274 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:295 -> [UART, PM25] Reading data...
19:50:24:295 -> [UART, PM25] Data not available.
19:50:24:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:295 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:295 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:316 -> [UART, PM25] Reading data...
19:50:24:316 -> [UART, PM25] Data not available.
19:50:24:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:316 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:316 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:337 -> [UART, PM25] Reading data...
19:50:24:337 -> [UART, PM25] Data not available.
19:50:24:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:337 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:337 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:358 -> [UART, PM25] Reading data...
19:50:24:358 -> [UART, PM25] Data not available.
19:50:24:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:358 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:358 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:379 -> [UART, PM25] Reading data...
19:50:24:379 -> [UART, PM25] Data not available.
19:50:24:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:379 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:379 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:400 -> [UART, PM25] Reading data...
19:50:24:400 -> [UART, PM25] Data not available.
19:50:24:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:400 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:400 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:421 -> [UART, PM25] Reading data...
19:50:24:421 -> [UART, PM25] Data not available.
19:50:24:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:422 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:422 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:442 -> [UART, PM25] Reading data...
19:50:24:442 -> [UART, PM25] Data not available.
19:50:24:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:442 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:442 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:463 -> [UART, PM25] Reading data...
19:50:24:463 -> [UART, PM25] Data not available.
19:50:24:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:463 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:463 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:484 -> [UART, PM25] Reading data...
19:50:24:485 -> [UART, PM25] Data not available.
19:50:24:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:485 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:485 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:505 -> [UART, PM25] Reading data...
19:50:24:505 -> [UART, PM25] Data not available.
19:50:24:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:505 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:505 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:526 -> [UART, PM25] Reading data...
19:50:24:526 -> [UART, PM25] Data not available.
19:50:24:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:526 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:526 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:547 -> [UART, PM25] Reading data...
19:50:24:548 -> [UART, PM25] Data not available.
19:50:24:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:548 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:548 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:568 -> [UART, PM25] Reading data...
19:50:24:568 -> [UART, PM25] Data not available.
19:50:24:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:568 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:568 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:589 -> [UART, PM25] Reading data...
19:50:24:589 -> [UART, PM25] Data not available.
19:50:24:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:589 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:589 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:610 -> [UART, PM25] Reading data...
19:50:24:610 -> [UART, PM25] Data not available.
19:50:24:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:610 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:610 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:631 -> [UART, PM25] Reading data...
19:50:24:631 -> [UART, PM25] Data not available.
19:50:24:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:631 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:631 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:652 -> [UART, PM25] Reading data...
19:50:24:652 -> [UART, PM25] Data not available.
19:50:24:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:652 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:652 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:673 -> [UART, PM25] Reading data...
19:50:24:673 -> [UART, PM25] Data not available.
19:50:24:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:673 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:673 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:694 -> [UART, PM25] Reading data...
19:50:24:694 -> [UART, PM25] Data not available.
19:50:24:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:694 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:694 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:715 -> [UART, PM25] Reading data...
19:50:24:715 -> [UART, PM25] Data not available.
19:50:24:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:715 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:715 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:736 -> [UART, PM25] Reading data...
19:50:24:736 -> [UART, PM25] Data not available.
19:50:24:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:736 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:736 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:765 -> [UART, PM25] Reading data...
19:50:24:765 -> [UART, PM25] Data not available.
19:50:24:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:765 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:765 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:778 -> [UART, PM25] Reading data...
19:50:24:778 -> [UART, PM25] Data not available.
19:50:24:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:778 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:778 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:799 -> [UART, PM25] Reading data...
19:50:24:799 -> [UART, PM25] Data not available.
19:50:24:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:799 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:799 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:820 -> [UART, PM25] Reading data...
19:50:24:820 -> [UART, PM25] Data not available.
19:50:24:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:820 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:820 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:841 -> [UART, PM25] Reading data...
19:50:24:842 -> [UART, PM25] Data not available.
19:50:24:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:842 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:842 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:862 -> [UART, PM25] Reading data...
19:50:24:862 -> [UART, PM25] Data not available.
19:50:24:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:862 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:862 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:883 -> [UART, PM25] Reading data...
19:50:24:883 -> [UART, PM25] Data not available.
19:50:24:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:904 -> [UART, PM25] Reading data...
19:50:24:904 -> [UART, PM25] Data not available.
19:50:24:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:905 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:905 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:925 -> [UART, PM25] Reading data...
19:50:24:925 -> [UART, PM25] Data not available.
19:50:24:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:925 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:925 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:946 -> [UART, PM25] Reading data...
19:50:24:946 -> [UART, PM25] Data not available.
19:50:24:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:946 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:946 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:967 -> [UART, PM25] Reading data...
19:50:24:967 -> [UART, PM25] Data not available.
19:50:24:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:967 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:967 -> [UART, PM25] Uart available, resetting event queue..
19:50:24:988 -> [UART, PM25] Reading data...
19:50:24:988 -> [UART, PM25] Data not available.
19:50:24:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:24:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:24:988 -> [UART, PM25] Uart available, clearing write errors..
19:50:24:988 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:009 -> [UART, PM25] Reading data...
19:50:25:009 -> [UART, PM25] Data not available.
19:50:25:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:009 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:009 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:030 -> [UART, PM25] Reading data...
19:50:25:030 -> [UART, PM25] Data not available.
19:50:25:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:031 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:031 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:051 -> [UART, PM25] Reading data...
19:50:25:051 -> [UART, PM25] Data not available.
19:50:25:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:051 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:051 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:072 -> [UART, PM25] Reading data...
19:50:25:072 -> [UART, PM25] Data not available.
19:50:25:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:072 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:072 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:093 -> [UART, PM25] Reading data...
19:50:25:093 -> [UART, PM25] Data not available.
19:50:25:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:093 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:093 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:114 -> [UART, PM25] Reading data...
19:50:25:114 -> [UART, PM25] Data not available.
19:50:25:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:114 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:114 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:135 -> [UART, PM25] Reading data...
19:50:25:135 -> [UART, PM25] Data not available.
19:50:25:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:135 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:135 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:156 -> [UART, PM25] Reading data...
19:50:25:157 -> [UART, PM25] Data not available.
19:50:25:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:157 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:157 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:177 -> [UART, PM25] Reading data...
19:50:25:177 -> [UART, PM25] Data not available.
19:50:25:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:177 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:177 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:198 -> [UART, PM25] Reading data...
19:50:25:198 -> [UART, PM25] Data not available.
19:50:25:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:198 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:198 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:219 -> [UART, PM25] Reading data...
19:50:25:219 -> [UART, PM25] Data not available.
19:50:25:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:219 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:219 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:240 -> [UART, PM25] Reading data...
19:50:25:240 -> [UART, PM25] Data not available.
19:50:25:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:240 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:240 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:261 -> [UART, PM25] Reading data...
19:50:25:261 -> [UART, PM25] Data not available.
19:50:25:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:261 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:261 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:288 -> [UART, PM25] Reading data...
19:50:25:289 -> [UART, PM25] Data not available.
19:50:25:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:289 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:289 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:303 -> [UART, PM25] Reading data...
19:50:25:303 -> [UART, PM25] Data not available.
19:50:25:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:303 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:303 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:324 -> [UART, PM25] Reading data...
19:50:25:324 -> [UART, PM25] Data not available.
19:50:25:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:324 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:324 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:345 -> [UART, PM25] Reading data...
19:50:25:345 -> [UART, PM25] Data not available.
19:50:25:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:345 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:345 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:366 -> [UART, PM25] Reading data...
19:50:25:366 -> [UART, PM25] Data not available.
19:50:25:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:366 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:366 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:387 -> [UART, PM25] Reading data...
19:50:25:387 -> [UART, PM25] Data not available.
19:50:25:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:387 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:387 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:408 -> [UART, PM25] Reading data...
19:50:25:408 -> [UART, PM25] Data not available.
19:50:25:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:408 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:408 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:429 -> [UART, PM25] Reading data...
19:50:25:429 -> [UART, PM25] Data not available.
19:50:25:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:429 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:429 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:450 -> [UART, PM25] Reading data...
19:50:25:450 -> [UART, PM25] Data not available.
19:50:25:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:450 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:450 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:471 -> [UART, PM25] Reading data...
19:50:25:472 -> [UART, PM25] Data not available.
19:50:25:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:472 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:472 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:492 -> [UART, PM25] Reading data...
19:50:25:492 -> [UART, PM25] Data not available.
19:50:25:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:492 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:492 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:513 -> [UART, PM25] Reading data...
19:50:25:513 -> [UART, PM25] Data not available.
19:50:25:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:513 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:513 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:534 -> [UART, PM25] Reading data...
19:50:25:534 -> [UART, PM25] Data not available.
19:50:25:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:534 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:534 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:555 -> [UART, PM25] Reading data...
19:50:25:555 -> [UART, PM25] Data not available.
19:50:25:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:555 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:555 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:576 -> [UART, PM25] Reading data...
19:50:25:576 -> [UART, PM25] Data not available.
19:50:25:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:576 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:576 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:597 -> [UART, PM25] Reading data...
19:50:25:597 -> [UART, PM25] Data not available.
19:50:25:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:597 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:597 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:618 -> [UART, PM25] Reading data...
19:50:25:618 -> [UART, PM25] Data not available.
19:50:25:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:618 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:618 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:639 -> [UART, PM25] Reading data...
19:50:25:639 -> [UART, PM25] Data not available.
19:50:25:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:639 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:639 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:660 -> [UART, PM25] Reading data...
19:50:25:660 -> [UART, PM25] Data not available.
19:50:25:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:660 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:660 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:681 -> [UART, PM25] Reading data...
19:50:25:681 -> [UART, PM25] Data not available.
19:50:25:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:681 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:681 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:702 -> [UART, PM25] Reading data...
19:50:25:702 -> [UART, PM25] Data not available.
19:50:25:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:702 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:702 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:723 -> [UART, PM25] Reading data...
19:50:25:723 -> [UART, PM25] Data not available.
19:50:25:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:723 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:723 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:744 -> [UART, PM25] Reading data...
19:50:25:744 -> [UART, PM25] Data not available.
19:50:25:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:744 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:744 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:765 -> [UART, PM25] Reading data...
19:50:25:765 -> [UART, PM25] Data not available.
19:50:25:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:765 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:765 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:808 -> [UART, PM25] Reading data...
19:50:25:819 -> [UART, PM25] Data not available.
19:50:25:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:819 -> [UART, PM25] Reading data...
19:50:25:819 -> [UART, PM25] Data not available.
19:50:25:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:828 -> [UART, PM25] Reading data...
19:50:25:828 -> [UART, PM25] Data not available.
19:50:25:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:828 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:828 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:851 -> [UART, PM25] Reading data...
19:50:25:852 -> [UART, PM25] Data not available.
19:50:25:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:852 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:852 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:870 -> [UART, PM25] Reading data...
19:50:25:870 -> [UART, PM25] Data not available.
19:50:25:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:870 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:870 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:891 -> [UART, PM25] Reading data...
19:50:25:891 -> [UART, PM25] Data not available.
19:50:25:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:891 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:891 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:912 -> [UART, PM25] Reading data...
19:50:25:912 -> [UART, PM25] Data not available.
19:50:25:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:912 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:912 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:933 -> [UART, PM25] Reading data...
19:50:25:933 -> [UART, PM25] Data not available.
19:50:25:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:933 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:933 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:954 -> [UART, PM25] Reading data...
19:50:25:959 -> [UART, PM25] Data not available.
19:50:25:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:959 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:959 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:975 -> [UART, PM25] Reading data...
19:50:25:975 -> [UART, PM25] Data not available.
19:50:25:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:975 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:975 -> [UART, PM25] Uart available, resetting event queue..
19:50:25:996 -> [UART, PM25] Reading data...
19:50:25:996 -> [UART, PM25] Data not available.
19:50:25:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:25:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:25:996 -> [UART, PM25] Uart available, clearing write errors..
19:50:25:996 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:017 -> [UART, PM25] Reading data...
19:50:26:017 -> [UART, PM25] Data not available.
19:50:26:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:017 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:017 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:038 -> [UART, PM25] Reading data...
19:50:26:038 -> [UART, PM25] Data not available.
19:50:26:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:038 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:038 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:059 -> [UART, PM25] Reading data...
19:50:26:059 -> [UART, PM25] Data not available.
19:50:26:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:059 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:059 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:080 -> [UART, PM25] Reading data...
19:50:26:081 -> [UART, PM25] Data not available.
19:50:26:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:081 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:081 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:101 -> [UART, PM25] Reading data...
19:50:26:101 -> [UART, PM25] Data not available.
19:50:26:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:101 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:101 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:122 -> [UART, PM25] Reading data...
19:50:26:122 -> [UART, PM25] Data not available.
19:50:26:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:122 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:122 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:143 -> [UART, PM25] Reading data...
19:50:26:143 -> [UART, PM25] Data not available.
19:50:26:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:164 -> [UART, PM25] Reading data...
19:50:26:164 -> [UART, PM25] Data not available.
19:50:26:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:164 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:164 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:185 -> [UART, PM25] Reading data...
19:50:26:185 -> [UART, PM25] Data not available.
19:50:26:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:185 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:185 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:206 -> [UART, PM25] Reading data...
19:50:26:206 -> [UART, PM25] Data not available.
19:50:26:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:206 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:206 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:227 -> [UART, PM25] Reading data...
19:50:26:227 -> [UART, PM25] Data not available.
19:50:26:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:227 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:227 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:248 -> [UART, PM25] Reading data...
19:50:26:248 -> [UART, PM25] Data not available.
19:50:26:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:248 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:248 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:269 -> [UART, PM25] Reading data...
19:50:26:269 -> [UART, PM25] Data not available.
19:50:26:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:269 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:269 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:290 -> [UART, PM25] Reading data...
19:50:26:290 -> [UART, PM25] Data not available.
19:50:26:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:290 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:290 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:322 -> [UART, PM25] Reading data...
19:50:26:323 -> [UART, PM25] Data not available.
19:50:26:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:323 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:323 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:332 -> [UART, PM25] Reading data...
19:50:26:332 -> [UART, PM25] Data not available.
19:50:26:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:332 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:332 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:353 -> [UART, PM25] Reading data...
19:50:26:353 -> [UART, PM25] Data not available.
19:50:26:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:353 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:353 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:374 -> [UART, PM25] Reading data...
19:50:26:374 -> [UART, PM25] Data not available.
19:50:26:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:374 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:374 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:395 -> [UART, PM25] Reading data...
19:50:26:395 -> [UART, PM25] Data not available.
19:50:26:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:395 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:395 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:416 -> [UART, PM25] Reading data...
19:50:26:416 -> [UART, PM25] Data not available.
19:50:26:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:416 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:416 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:437 -> [UART, PM25] Reading data...
19:50:26:437 -> [UART, PM25] Data not available.
19:50:26:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:437 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:437 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:458 -> [UART, PM25] Reading data...
19:50:26:458 -> [UART, PM25] Data not available.
19:50:26:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:458 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:458 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:479 -> [UART, PM25] Reading data...
19:50:26:479 -> [UART, PM25] Data not available.
19:50:26:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:479 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:479 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:500 -> [UART, PM25] Reading data...
19:50:26:500 -> [UART, PM25] Data not available.
19:50:26:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:500 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:500 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:521 -> [UART, PM25] Reading data...
19:50:26:521 -> [UART, PM25] Data not available.
19:50:26:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:521 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:521 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:542 -> [UART, PM25] Reading data...
19:50:26:542 -> [UART, PM25] Data not available.
19:50:26:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:542 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:542 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:563 -> [UART, PM25] Reading data...
19:50:26:563 -> [UART, PM25] Data not available.
19:50:26:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:584 -> [UART, PM25] Reading data...
19:50:26:585 -> [UART, PM25] Data not available.
19:50:26:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:585 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:585 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:605 -> [UART, PM25] Reading data...
19:50:26:606 -> [UART, PM25] Data not available.
19:50:26:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:606 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:606 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:626 -> [UART, PM25] Reading data...
19:50:26:626 -> [UART, PM25] Data not available.
19:50:26:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:626 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:626 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:647 -> [UART, PM25] Reading data...
19:50:26:647 -> [UART, PM25] Data not available.
19:50:26:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:647 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:647 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:668 -> [UART, PM25] Reading data...
19:50:26:668 -> [UART, PM25] Data not available.
19:50:26:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:668 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:668 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:689 -> [UART, PM25] Reading data...
19:50:26:689 -> [UART, PM25] Data not available.
19:50:26:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:689 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:689 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:710 -> [UART, PM25] Reading data...
19:50:26:710 -> [UART, PM25] Data not available.
19:50:26:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:710 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:710 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:731 -> [UART, PM25] Reading data...
19:50:26:731 -> [UART, PM25] Data not available.
19:50:26:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:731 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:731 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:752 -> [UART, PM25] Reading data...
19:50:26:752 -> [UART, PM25] Data not available.
19:50:26:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:752 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:752 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:773 -> [UART, PM25] Reading data...
19:50:26:773 -> [UART, PM25] Data not available.
19:50:26:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:774 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:774 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:795 -> [UART, PM25] Reading data...
19:50:26:795 -> [UART, PM25] Data not available.
19:50:26:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:795 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:795 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:816 -> [UART, PM25] Reading data...
19:50:26:816 -> [UART, PM25] Data not available.
19:50:26:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:816 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:816 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:838 -> [UART, PM25] Reading data...
19:50:26:838 -> [UART, PM25] Data not available.
19:50:26:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:838 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:838 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:858 -> [UART, PM25] Reading data...
19:50:26:858 -> [UART, PM25] Data not available.
19:50:26:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:858 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:858 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:879 -> [UART, PM25] Reading data...
19:50:26:879 -> [UART, PM25] Data not available.
19:50:26:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:879 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:879 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:900 -> [UART, PM25] Reading data...
19:50:26:900 -> [UART, PM25] Data not available.
19:50:26:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:900 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:900 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:921 -> [UART, PM25] Reading data...
19:50:26:921 -> [UART, PM25] Data not available.
19:50:26:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:921 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:921 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:942 -> [UART, PM25] Reading data...
19:50:26:942 -> [UART, PM25] Data not available.
19:50:26:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:942 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:942 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:963 -> [UART, PM25] Reading data...
19:50:26:963 -> [UART, PM25] Data not available.
19:50:26:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:963 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:963 -> [UART, PM25] Uart available, resetting event queue..
19:50:26:984 -> [UART, PM25] Reading data...
19:50:26:984 -> [UART, PM25] Data not available.
19:50:26:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:26:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:26:984 -> [UART, PM25] Uart available, clearing write errors..
19:50:26:984 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:005 -> [UART, PM25] Reading data...
19:50:27:005 -> [UART, PM25] Data not available.
19:50:27:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:005 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:005 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:026 -> [UART, PM25] Reading data...
19:50:27:026 -> [UART, PM25] Data not available.
19:50:27:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:026 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:026 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:047 -> [UART, PM25] Reading data...
19:50:27:047 -> [UART, PM25] Data not available.
19:50:27:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:047 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:047 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:068 -> [UART, PM25] Reading data...
19:50:27:068 -> [UART, PM25] Data not available.
19:50:27:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:068 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:068 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:089 -> [UART, PM25] Reading data...
19:50:27:089 -> [UART, PM25] Data not available.
19:50:27:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:089 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:089 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:110 -> [UART, PM25] Reading data...
19:50:27:110 -> [UART, PM25] Data not available.
19:50:27:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:110 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:110 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:131 -> [UART, PM25] Reading data...
19:50:27:131 -> [UART, PM25] Data not available.
19:50:27:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:131 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:131 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:152 -> [UART, PM25] Reading data...
19:50:27:152 -> [UART, PM25] Data not available.
19:50:27:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:152 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:152 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:173 -> [UART, PM25] Reading data...
19:50:27:173 -> [UART, PM25] Data not available.
19:50:27:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:173 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:173 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:194 -> [UART, PM25] Reading data...
19:50:27:194 -> [UART, PM25] Data not available.
19:50:27:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:194 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:194 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:217 -> [UART, PM25] Reading data...
19:50:27:218 -> [UART, PM25] Data not available.
19:50:27:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:218 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:218 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:236 -> [UART, PM25] Reading data...
19:50:27:236 -> [UART, PM25] Data not available.
19:50:27:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:236 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:236 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:257 -> [UART, PM25] Reading data...
19:50:27:257 -> [UART, PM25] Data not available.
19:50:27:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:257 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:257 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:278 -> [UART, PM25] Reading data...
19:50:27:278 -> [UART, PM25] Data not available.
19:50:27:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:278 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:278 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:299 -> [UART, PM25] Reading data...
19:50:27:300 -> [UART, PM25] Data not available.
19:50:27:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:300 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:300 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:320 -> [UART, PM25] Reading data...
19:50:27:320 -> [UART, PM25] Data not available.
19:50:27:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:320 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:320 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:321 -> PING!
19:50:27:534 -> [UART, PM25] Reading data...
19:50:27:534 -> [UART, PM25] Data not available.
19:50:27:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:534 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:534 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:555 -> [UART, PM25] Reading data...
19:50:27:556 -> [UART, PM25] Data not available.
19:50:27:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:556 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:556 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:576 -> [UART, PM25] Reading data...
19:50:27:576 -> [UART, PM25] Data not available.
19:50:27:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:576 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:576 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:597 -> [UART, PM25] Reading data...
19:50:27:598 -> [UART, PM25] Data not available.
19:50:27:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:598 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:598 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:639 -> [UART, PM25] Reading data...
19:50:27:641 -> [UART, PM25] Data not available.
19:50:27:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:641 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:641 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:641 -> [UART, PM25] Reading data...
19:50:27:641 -> [UART, PM25] Data not available.
19:50:27:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:641 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:641 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:660 -> [UART, PM25] Reading data...
19:50:27:660 -> [UART, PM25] Data not available.
19:50:27:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:661 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:661 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:682 -> [UART, PM25] Reading data...
19:50:27:683 -> [UART, PM25] Data not available.
19:50:27:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:683 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:683 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:702 -> [UART, PM25] Reading data...
19:50:27:702 -> [UART, PM25] Data not available.
19:50:27:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:702 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:702 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:723 -> [UART, PM25] Reading data...
19:50:27:723 -> [UART, PM25] Data not available.
19:50:27:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:723 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:723 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:744 -> [UART, PM25] Reading data...
19:50:27:745 -> [UART, PM25] Data not available.
19:50:27:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:745 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:745 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:765 -> [UART, PM25] Reading data...
19:50:27:765 -> [UART, PM25] Data not available.
19:50:27:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:765 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:765 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:786 -> [UART, PM25] Reading data...
19:50:27:786 -> [UART, PM25] Data not available.
19:50:27:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:786 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:786 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:807 -> [UART, PM25] Reading data...
19:50:27:807 -> [UART, PM25] Data not available.
19:50:27:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:807 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:807 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:828 -> [UART, PM25] Reading data...
19:50:27:828 -> [UART, PM25] Data not available.
19:50:27:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:828 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:828 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:849 -> [UART, PM25] Reading data...
19:50:27:849 -> [UART, PM25] Data not available.
19:50:27:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:849 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:849 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:880 -> [UART, PM25] Reading data...
19:50:27:880 -> [UART, PM25] Data not available.
19:50:27:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:880 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:880 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:891 -> [UART, PM25] Reading data...
19:50:27:891 -> [UART, PM25] Data not available.
19:50:27:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:891 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:891 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:912 -> [UART, PM25] Reading data...
19:50:27:912 -> [UART, PM25] Data not available.
19:50:27:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:912 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:912 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:933 -> [UART, PM25] Reading data...
19:50:27:934 -> [UART, PM25] Data not available.
19:50:27:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:934 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:934 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:954 -> [UART, PM25] Reading data...
19:50:27:954 -> [UART, PM25] Data not available.
19:50:27:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:954 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:954 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:975 -> [UART, PM25] Reading data...
19:50:27:975 -> [UART, PM25] Data not available.
19:50:27:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:975 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:975 -> [UART, PM25] Uart available, resetting event queue..
19:50:27:996 -> [UART, PM25] Reading data...
19:50:27:999 -> [UART, PM25] Data not available.
19:50:27:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:27:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:27:999 -> [UART, PM25] Uart available, clearing write errors..
19:50:27:999 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:017 -> [UART, PM25] Reading data...
19:50:28:017 -> [UART, PM25] Data not available.
19:50:28:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:017 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:017 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:039 -> [UART, PM25] Reading data...
19:50:28:039 -> [UART, PM25] Data not available.
19:50:28:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:039 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:039 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:059 -> [UART, PM25] Reading data...
19:50:28:059 -> [UART, PM25] Data not available.
19:50:28:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:059 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:059 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:080 -> [UART, PM25] Reading data...
19:50:28:080 -> [UART, PM25] Data not available.
19:50:28:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:080 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:080 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:101 -> [UART, PM25] Reading data...
19:50:28:101 -> [UART, PM25] Data not available.
19:50:28:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:101 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:101 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:122 -> [UART, PM25] Reading data...
19:50:28:122 -> [UART, PM25] Data not available.
19:50:28:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:122 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:122 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:143 -> [UART, PM25] Reading data...
19:50:28:143 -> [UART, PM25] Data not available.
19:50:28:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:164 -> [UART, PM25] Reading data...
19:50:28:164 -> [UART, PM25] Data not available.
19:50:28:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:164 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:164 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:185 -> [UART, PM25] Reading data...
19:50:28:185 -> [UART, PM25] Data not available.
19:50:28:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:185 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:185 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:206 -> [UART, PM25] Reading data...
19:50:28:206 -> [UART, PM25] Data not available.
19:50:28:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:206 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:206 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:227 -> [UART, PM25] Reading data...
19:50:28:227 -> [UART, PM25] Data not available.
19:50:28:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:227 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:227 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:248 -> [UART, PM25] Reading data...
19:50:28:248 -> [UART, PM25] Data not available.
19:50:28:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:248 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:248 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:269 -> [UART, PM25] Reading data...
19:50:28:269 -> [UART, PM25] Data not available.
19:50:28:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:269 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:269 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:290 -> [UART, PM25] Reading data...
19:50:28:290 -> [UART, PM25] Data not available.
19:50:28:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:290 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:290 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:311 -> [UART, PM25] Reading data...
19:50:28:311 -> [UART, PM25] Data not available.
19:50:28:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:311 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:311 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:332 -> [UART, PM25] Reading data...
19:50:28:333 -> [UART, PM25] Data not available.
19:50:28:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:333 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:333 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:353 -> [UART, PM25] Reading data...
19:50:28:353 -> [UART, PM25] Data not available.
19:50:28:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:353 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:353 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:374 -> [UART, PM25] Reading data...
19:50:28:374 -> [UART, PM25] Data not available.
19:50:28:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:374 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:374 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:399 -> [UART, PM25] Reading data...
19:50:28:400 -> [UART, PM25] Data not available.
19:50:28:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:400 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:400 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:416 -> [UART, PM25] Reading data...
19:50:28:416 -> [UART, PM25] Data not available.
19:50:28:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:416 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:416 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:437 -> [UART, PM25] Reading data...
19:50:28:437 -> [UART, PM25] Data not available.
19:50:28:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:437 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:437 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:458 -> [UART, PM25] Reading data...
19:50:28:458 -> [UART, PM25] Data not available.
19:50:28:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:458 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:458 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:479 -> [UART, PM25] Reading data...
19:50:28:479 -> [UART, PM25] Data not available.
19:50:28:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:479 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:479 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:500 -> [UART, PM25] Reading data...
19:50:28:500 -> [UART, PM25] Data not available.
19:50:28:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:500 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:500 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:521 -> [UART, PM25] Reading data...
19:50:28:521 -> [UART, PM25] Data not available.
19:50:28:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:521 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:521 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:542 -> [UART, PM25] Reading data...
19:50:28:542 -> [UART, PM25] Data not available.
19:50:28:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:542 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:542 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:563 -> [UART, PM25] Reading data...
19:50:28:563 -> [UART, PM25] Data not available.
19:50:28:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:584 -> [UART, PM25] Reading data...
19:50:28:584 -> [UART, PM25] Data not available.
19:50:28:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:584 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:584 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:605 -> [UART, PM25] Reading data...
19:50:28:605 -> [UART, PM25] Data not available.
19:50:28:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:605 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:605 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:626 -> [UART, PM25] Reading data...
19:50:28:626 -> [UART, PM25] Data not available.
19:50:28:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:626 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:626 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:647 -> [UART, PM25] Reading data...
19:50:28:647 -> [UART, PM25] Data not available.
19:50:28:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:647 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:647 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:668 -> [UART, PM25] Reading data...
19:50:28:668 -> [UART, PM25] Data not available.
19:50:28:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:668 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:668 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:689 -> [UART, PM25] Reading data...
19:50:28:689 -> [UART, PM25] Data not available.
19:50:28:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:689 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:689 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:710 -> [UART, PM25] Reading data...
19:50:28:710 -> [UART, PM25] Data not available.
19:50:28:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:710 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:710 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:731 -> [UART, PM25] Reading data...
19:50:28:731 -> [UART, PM25] Data not available.
19:50:28:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:731 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:731 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:752 -> [UART, PM25] Reading data...
19:50:28:752 -> [UART, PM25] Data not available.
19:50:28:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:752 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:752 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:773 -> [UART, PM25] Reading data...
19:50:28:773 -> [UART, PM25] Data not available.
19:50:28:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:773 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:773 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:794 -> [UART, PM25] Reading data...
19:50:28:794 -> [UART, PM25] Data not available.
19:50:28:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:794 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:794 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:815 -> [UART, PM25] Reading data...
19:50:28:815 -> [UART, PM25] Data not available.
19:50:28:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:815 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:815 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:836 -> [UART, PM25] Reading data...
19:50:28:836 -> [UART, PM25] Data not available.
19:50:28:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:836 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:836 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:857 -> [UART, PM25] Reading data...
19:50:28:857 -> [UART, PM25] Data not available.
19:50:28:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:857 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:857 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:878 -> [UART, PM25] Reading data...
19:50:28:878 -> [UART, PM25] Data not available.
19:50:28:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:878 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:878 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:899 -> [UART, PM25] Reading data...
19:50:28:911 -> [UART, PM25] Data not available.
19:50:28:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:911 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:911 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:920 -> [UART, PM25] Reading data...
19:50:28:920 -> [UART, PM25] Data not available.
19:50:28:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:920 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:920 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:941 -> [UART, PM25] Reading data...
19:50:28:941 -> [UART, PM25] Data not available.
19:50:28:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:941 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:941 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:962 -> [UART, PM25] Reading data...
19:50:28:962 -> [UART, PM25] Data not available.
19:50:28:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:962 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:962 -> [UART, PM25] Uart available, resetting event queue..
19:50:28:983 -> [UART, PM25] Reading data...
19:50:28:983 -> [UART, PM25] Data not available.
19:50:28:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:28:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:28:983 -> [UART, PM25] Uart available, clearing write errors..
19:50:28:983 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:004 -> [UART, PM25] Reading data...
19:50:29:004 -> [UART, PM25] Data not available.
19:50:29:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:004 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:004 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:025 -> [UART, PM25] Reading data...
19:50:29:025 -> [UART, PM25] Data not available.
19:50:29:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:025 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:025 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:046 -> [UART, PM25] Reading data...
19:50:29:046 -> [UART, PM25] Data not available.
19:50:29:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:046 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:046 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:067 -> [UART, PM25] Reading data...
19:50:29:067 -> [UART, PM25] Data not available.
19:50:29:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:067 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:067 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:088 -> [UART, PM25] Reading data...
19:50:29:088 -> [UART, PM25] Data not available.
19:50:29:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:088 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:088 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:109 -> [UART, PM25] Reading data...
19:50:29:109 -> [UART, PM25] Data not available.
19:50:29:109 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:109 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:109 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:109 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:130 -> [UART, PM25] Reading data...
19:50:29:130 -> [UART, PM25] Data not available.
19:50:29:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:130 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:130 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:151 -> [UART, PM25] Reading data...
19:50:29:151 -> [UART, PM25] Data not available.
19:50:29:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:151 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:151 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:172 -> [UART, PM25] Reading data...
19:50:29:172 -> [UART, PM25] Data not available.
19:50:29:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:172 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:172 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:193 -> [UART, PM25] Reading data...
19:50:29:193 -> [UART, PM25] Data not available.
19:50:29:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:193 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:193 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:214 -> [UART, PM25] Reading data...
19:50:29:214 -> [UART, PM25] Data not available.
19:50:29:214 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:214 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:214 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:214 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:235 -> [UART, PM25] Reading data...
19:50:29:235 -> [UART, PM25] Data not available.
19:50:29:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:235 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:235 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:267 -> [UART, PM25] Reading data...
19:50:29:293 -> [UART, PM25] Data not available.
19:50:29:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:293 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:293 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:293 -> [UART, PM25] Reading data...
19:50:29:293 -> [UART, PM25] Data not available.
19:50:29:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:293 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:293 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:298 -> [UART, PM25] Reading data...
19:50:29:298 -> [UART, PM25] Data not available.
19:50:29:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:298 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:298 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:319 -> [UART, PM25] Reading data...
19:50:29:319 -> [UART, PM25] Data not available.
19:50:29:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:319 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:319 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:340 -> [UART, PM25] Reading data...
19:50:29:340 -> [UART, PM25] Data not available.
19:50:29:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:340 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:340 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:361 -> [UART, PM25] Reading data...
19:50:29:361 -> [UART, PM25] Data not available.
19:50:29:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:361 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:361 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:382 -> [UART, PM25] Reading data...
19:50:29:382 -> [UART, PM25] Data not available.
19:50:29:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:382 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:382 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:403 -> [UART, PM25] Reading data...
19:50:29:403 -> [UART, PM25] Data not available.
19:50:29:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:403 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:403 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:426 -> [UART, PM25] Reading data...
19:50:29:427 -> [UART, PM25] Data not available.
19:50:29:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:427 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:427 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:445 -> [UART, PM25] Reading data...
19:50:29:445 -> [UART, PM25] Data not available.
19:50:29:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:445 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:445 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:466 -> [UART, PM25] Reading data...
19:50:29:466 -> [UART, PM25] Data not available.
19:50:29:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:466 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:466 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:487 -> [UART, PM25] Reading data...
19:50:29:487 -> [UART, PM25] Data not available.
19:50:29:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:487 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:487 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:508 -> [UART, PM25] Reading data...
19:50:29:508 -> [UART, PM25] Data not available.
19:50:29:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:508 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:508 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:529 -> [UART, PM25] Reading data...
19:50:29:529 -> [UART, PM25] Data not available.
19:50:29:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:529 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:529 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:550 -> [UART, PM25] Reading data...
19:50:29:550 -> [UART, PM25] Data not available.
19:50:29:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:550 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:550 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:571 -> [UART, PM25] Reading data...
19:50:29:571 -> [UART, PM25] Data not available.
19:50:29:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:571 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:571 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:592 -> [UART, PM25] Reading data...
19:50:29:592 -> [UART, PM25] Data not available.
19:50:29:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:592 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:592 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:613 -> [UART, PM25] Reading data...
19:50:29:613 -> [UART, PM25] Data not available.
19:50:29:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:613 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:613 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:634 -> [UART, PM25] Reading data...
19:50:29:634 -> [UART, PM25] Data not available.
19:50:29:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:634 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:634 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:655 -> [UART, PM25] Reading data...
19:50:29:655 -> [UART, PM25] Data not available.
19:50:29:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:655 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:655 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:676 -> [UART, PM25] Reading data...
19:50:29:676 -> [UART, PM25] Data not available.
19:50:29:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:676 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:676 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:697 -> [UART, PM25] Reading data...
19:50:29:697 -> [UART, PM25] Data not available.
19:50:29:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:697 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:697 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:718 -> [UART, PM25] Reading data...
19:50:29:718 -> [UART, PM25] Data not available.
19:50:29:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:718 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:718 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:739 -> [UART, PM25] Reading data...
19:50:29:739 -> [UART, PM25] Data not available.
19:50:29:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:739 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:739 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:760 -> [UART, PM25] Reading data...
19:50:29:760 -> [UART, PM25] Data not available.
19:50:29:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:760 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:760 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:781 -> [UART, PM25] Reading data...
19:50:29:781 -> [UART, PM25] Data not available.
19:50:29:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:781 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:781 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:802 -> [UART, PM25] Reading data...
19:50:29:802 -> [UART, PM25] Data not available.
19:50:29:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:802 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:802 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:823 -> [UART, PM25] Reading data...
19:50:29:823 -> [UART, PM25] Data not available.
19:50:29:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:823 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:823 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:844 -> [UART, PM25] Reading data...
19:50:29:844 -> [UART, PM25] Data not available.
19:50:29:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:844 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:844 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:865 -> [UART, PM25] Reading data...
19:50:29:865 -> [UART, PM25] Data not available.
19:50:29:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:865 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:865 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:886 -> [UART, PM25] Reading data...
19:50:29:886 -> [UART, PM25] Data not available.
19:50:29:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:886 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:886 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:907 -> [UART, PM25] Reading data...
19:50:29:907 -> [UART, PM25] Data not available.
19:50:29:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:907 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:907 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:937 -> [UART, PM25] Reading data...
19:50:29:938 -> [UART, PM25] Data not available.
19:50:29:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:938 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:938 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:949 -> [UART, PM25] Reading data...
19:50:29:949 -> [UART, PM25] Data not available.
19:50:29:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:949 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:949 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:970 -> [UART, PM25] Reading data...
19:50:29:970 -> [UART, PM25] Data not available.
19:50:29:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:970 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:970 -> [UART, PM25] Uart available, resetting event queue..
19:50:29:991 -> [UART, PM25] Reading data...
19:50:29:991 -> [UART, PM25] Data not available.
19:50:29:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:29:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:29:991 -> [UART, PM25] Uart available, clearing write errors..
19:50:29:991 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:012 -> [UART, PM25] Reading data...
19:50:30:012 -> [UART, PM25] Data not available.
19:50:30:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:012 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:012 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:033 -> [UART, PM25] Reading data...
19:50:30:033 -> [UART, PM25] Data not available.
19:50:30:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:033 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:033 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:054 -> [UART, PM25] Reading data...
19:50:30:054 -> [UART, PM25] Data not available.
19:50:30:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:054 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:054 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:075 -> [UART, PM25] Reading data...
19:50:30:075 -> [UART, PM25] Data not available.
19:50:30:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:075 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:075 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:096 -> [UART, PM25] Reading data...
19:50:30:096 -> [UART, PM25] Data not available.
19:50:30:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:096 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:096 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:117 -> [UART, PM25] Reading data...
19:50:30:117 -> [UART, PM25] Data not available.
19:50:30:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:117 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:117 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:138 -> [UART, PM25] Reading data...
19:50:30:138 -> [UART, PM25] Data not available.
19:50:30:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:138 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:138 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:159 -> [UART, PM25] Reading data...
19:50:30:159 -> [UART, PM25] Data not available.
19:50:30:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:159 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:159 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:180 -> [UART, PM25] Reading data...
19:50:30:180 -> [UART, PM25] Data not available.
19:50:30:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:180 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:180 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:201 -> [UART, PM25] Reading data...
19:50:30:201 -> [UART, PM25] Data not available.
19:50:30:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:201 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:201 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:222 -> [UART, PM25] Reading data...
19:50:30:223 -> [UART, PM25] Data not available.
19:50:30:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:243 -> [UART, PM25] Reading data...
19:50:30:243 -> [UART, PM25] Data not available.
19:50:30:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:243 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:243 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:264 -> [UART, PM25] Reading data...
19:50:30:264 -> [UART, PM25] Data not available.
19:50:30:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:264 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:264 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:285 -> [UART, PM25] Reading data...
19:50:30:286 -> [UART, PM25] Data not available.
19:50:30:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:286 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:286 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:308 -> [UART, PM25] Reading data...
19:50:30:310 -> [UART, PM25] Data not available.
19:50:30:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:310 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:310 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:327 -> [UART, PM25] Reading data...
19:50:30:327 -> [UART, PM25] Data not available.
19:50:30:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:327 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:327 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:348 -> [UART, PM25] Reading data...
19:50:30:348 -> [UART, PM25] Data not available.
19:50:30:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:348 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:348 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:369 -> [UART, PM25] Reading data...
19:50:30:369 -> [UART, PM25] Data not available.
19:50:30:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:369 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:369 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:390 -> [UART, PM25] Reading data...
19:50:30:390 -> [UART, PM25] Data not available.
19:50:30:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:390 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:390 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:411 -> [UART, PM25] Reading data...
19:50:30:411 -> [UART, PM25] Data not available.
19:50:30:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:411 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:411 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:432 -> [UART, PM25] Reading data...
19:50:30:432 -> [UART, PM25] Data not available.
19:50:30:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:432 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:432 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:453 -> [UART, PM25] Reading data...
19:50:30:453 -> [UART, PM25] Data not available.
19:50:30:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:453 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:453 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:474 -> [UART, PM25] Reading data...
19:50:30:474 -> [UART, PM25] Data not available.
19:50:30:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:474 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:474 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:495 -> [UART, PM25] Reading data...
19:50:30:495 -> [UART, PM25] Data not available.
19:50:30:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:495 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:495 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:516 -> [UART, PM25] Reading data...
19:50:30:517 -> [UART, PM25] Data not available.
19:50:30:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:517 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:517 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:537 -> [UART, PM25] Reading data...
19:50:30:537 -> [UART, PM25] Data not available.
19:50:30:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:537 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:537 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:558 -> [UART, PM25] Reading data...
19:50:30:558 -> [UART, PM25] Data not available.
19:50:30:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:558 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:558 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:579 -> [UART, PM25] Reading data...
19:50:30:579 -> [UART, PM25] Data not available.
19:50:30:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:579 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:579 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:600 -> [UART, PM25] Reading data...
19:50:30:600 -> [UART, PM25] Data not available.
19:50:30:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:600 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:600 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:621 -> [UART, PM25] Reading data...
19:50:30:621 -> [UART, PM25] Data not available.
19:50:30:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:621 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:621 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:642 -> [UART, PM25] Reading data...
19:50:30:642 -> [UART, PM25] Data not available.
19:50:30:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:642 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:642 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:663 -> [UART, PM25] Reading data...
19:50:30:663 -> [UART, PM25] Data not available.
19:50:30:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:663 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:663 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:684 -> [UART, PM25] Reading data...
19:50:30:685 -> [UART, PM25] Data not available.
19:50:30:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:705 -> [UART, PM25] Reading data...
19:50:30:705 -> [UART, PM25] Data not available.
19:50:30:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:705 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:705 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:726 -> [UART, PM25] Reading data...
19:50:30:726 -> [UART, PM25] Data not available.
19:50:30:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:726 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:726 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:747 -> [UART, PM25] Reading data...
19:50:30:747 -> [UART, PM25] Data not available.
19:50:30:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:747 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:747 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:768 -> [UART, PM25] Reading data...
19:50:30:769 -> [UART, PM25] Data not available.
19:50:30:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:769 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:769 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:789 -> [UART, PM25] Reading data...
19:50:30:789 -> [UART, PM25] Data not available.
19:50:30:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:789 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:789 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:810 -> [UART, PM25] Reading data...
19:50:30:810 -> [UART, PM25] Data not available.
19:50:30:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:810 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:810 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:832 -> [UART, PM25] Reading data...
19:50:30:833 -> [UART, PM25] Data not available.
19:50:30:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:833 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:833 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:852 -> [UART, PM25] Reading data...
19:50:30:852 -> [UART, PM25] Data not available.
19:50:30:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:852 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:852 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:873 -> [UART, PM25] Reading data...
19:50:30:873 -> [UART, PM25] Data not available.
19:50:30:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:873 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:873 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:894 -> [UART, PM25] Reading data...
19:50:30:895 -> [UART, PM25] Data not available.
19:50:30:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:895 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:895 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:915 -> [UART, PM25] Reading data...
19:50:30:915 -> [UART, PM25] Data not available.
19:50:30:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:915 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:915 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:936 -> [UART, PM25] Reading data...
19:50:30:936 -> [UART, PM25] Data not available.
19:50:30:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:936 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:936 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:965 -> [UART, PM25] Reading data...
19:50:30:966 -> [UART, PM25] Data not available.
19:50:30:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:978 -> [UART, PM25] Reading data...
19:50:30:978 -> [UART, PM25] Data not available.
19:50:30:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:30:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:30:978 -> [UART, PM25] Uart available, clearing write errors..
19:50:30:978 -> [UART, PM25] Uart available, resetting event queue..
19:50:30:999 -> [UART, PM25] Reading data...
19:50:31:000 -> [UART, PM25] Data not available.
19:50:31:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:000 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:000 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:020 -> [UART, PM25] Reading data...
19:50:31:020 -> [UART, PM25] Data not available.
19:50:31:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:020 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:020 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:041 -> [UART, PM25] Reading data...
19:50:31:041 -> [UART, PM25] Data not available.
19:50:31:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:041 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:041 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:062 -> [UART, PM25] Reading data...
19:50:31:062 -> [UART, PM25] Data not available.
19:50:31:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:062 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:062 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:083 -> [UART, PM25] Reading data...
19:50:31:083 -> [UART, PM25] Data not available.
19:50:31:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:083 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:083 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:104 -> [UART, PM25] Reading data...
19:50:31:104 -> [UART, PM25] Data not available.
19:50:31:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:105 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:105 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:125 -> [UART, PM25] Reading data...
19:50:31:125 -> [UART, PM25] Data not available.
19:50:31:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:125 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:125 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:146 -> [UART, PM25] Reading data...
19:50:31:146 -> [UART, PM25] Data not available.
19:50:31:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:146 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:146 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:169 -> [UART, PM25] Reading data...
19:50:31:201 -> [UART, PM25] Data not available.
19:50:31:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:201 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:201 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:201 -> [UART, PM25] Reading data...
19:50:31:201 -> [UART, PM25] Data not available.
19:50:31:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:201 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:201 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:209 -> [UART, PM25] Reading data...
19:50:31:209 -> [UART, PM25] Data not available.
19:50:31:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:209 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:209 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:230 -> [UART, PM25] Reading data...
19:50:31:232 -> [UART, PM25] Data not available.
19:50:31:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:232 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:232 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:251 -> [UART, PM25] Reading data...
19:50:31:251 -> [UART, PM25] Data not available.
19:50:31:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:251 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:251 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:272 -> [UART, PM25] Reading data...
19:50:31:272 -> [UART, PM25] Data not available.
19:50:31:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:272 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:272 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:293 -> [UART, PM25] Reading data...
19:50:31:293 -> [UART, PM25] Data not available.
19:50:31:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:293 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:293 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:314 -> [UART, PM25] Reading data...
19:50:31:314 -> [UART, PM25] Data not available.
19:50:31:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:315 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:315 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:335 -> [UART, PM25] Reading data...
19:50:31:335 -> [UART, PM25] Data not available.
19:50:31:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:335 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:335 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:356 -> [UART, PM25] Reading data...
19:50:31:356 -> [UART, PM25] Data not available.
19:50:31:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:356 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:356 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:377 -> [UART, PM25] Reading data...
19:50:31:377 -> [UART, PM25] Data not available.
19:50:31:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:377 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:377 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:398 -> [UART, PM25] Reading data...
19:50:31:398 -> [UART, PM25] Data not available.
19:50:31:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:398 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:398 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:419 -> [UART, PM25] Reading data...
19:50:31:419 -> [UART, PM25] Data not available.
19:50:31:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:419 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:419 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:440 -> [UART, PM25] Reading data...
19:50:31:440 -> [UART, PM25] Data not available.
19:50:31:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:440 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:440 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:461 -> [UART, PM25] Reading data...
19:50:31:461 -> [UART, PM25] Data not available.
19:50:31:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:461 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:461 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:482 -> [UART, PM25] Reading data...
19:50:31:482 -> [UART, PM25] Data not available.
19:50:31:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:482 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:482 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:503 -> [UART, PM25] Reading data...
19:50:31:503 -> [UART, PM25] Data not available.
19:50:31:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:503 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:503 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:524 -> [UART, PM25] Reading data...
19:50:31:524 -> [UART, PM25] Data not available.
19:50:31:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:524 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:524 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:545 -> [UART, PM25] Reading data...
19:50:31:546 -> [UART, PM25] Data not available.
19:50:31:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:566 -> [UART, PM25] Reading data...
19:50:31:566 -> [UART, PM25] Data not available.
19:50:31:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:566 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:566 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:587 -> [UART, PM25] Reading data...
19:50:31:587 -> [UART, PM25] Data not available.
19:50:31:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:587 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:587 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:608 -> [UART, PM25] Reading data...
19:50:31:608 -> [UART, PM25] Data not available.
19:50:31:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:608 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:608 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:629 -> [UART, PM25] Reading data...
19:50:31:629 -> [UART, PM25] Data not available.
19:50:31:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:629 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:629 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:650 -> [UART, PM25] Reading data...
19:50:31:650 -> [UART, PM25] Data not available.
19:50:31:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:650 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:650 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:671 -> [UART, PM25] Reading data...
19:50:31:671 -> [UART, PM25] Data not available.
19:50:31:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:671 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:671 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:692 -> [UART, PM25] Reading data...
19:50:31:692 -> [UART, PM25] Data not available.
19:50:31:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:692 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:692 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:713 -> [UART, PM25] Reading data...
19:50:31:713 -> [UART, PM25] Data not available.
19:50:31:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:713 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:713 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:734 -> [UART, PM25] Reading data...
19:50:31:734 -> [UART, PM25] Data not available.
19:50:31:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:734 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:734 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:755 -> [UART, PM25] Reading data...
19:50:31:755 -> [UART, PM25] Data not available.
19:50:31:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:755 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:755 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:776 -> [UART, PM25] Reading data...
19:50:31:776 -> [UART, PM25] Data not available.
19:50:31:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:776 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:776 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:797 -> [UART, PM25] Reading data...
19:50:31:798 -> [UART, PM25] Data not available.
19:50:31:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:818 -> [UART, PM25] Reading data...
19:50:31:818 -> [UART, PM25] Data not available.
19:50:31:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:818 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:818 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:839 -> [UART, PM25] Reading data...
19:50:31:839 -> [UART, PM25] Data not available.
19:50:31:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:839 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:839 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:860 -> [UART, PM25] Reading data...
19:50:31:861 -> [UART, PM25] Data not available.
19:50:31:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:861 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:861 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:881 -> [UART, PM25] Reading data...
19:50:31:881 -> [UART, PM25] Data not available.
19:50:31:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:881 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:881 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:902 -> [UART, PM25] Reading data...
19:50:31:902 -> [UART, PM25] Data not available.
19:50:31:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:902 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:902 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:923 -> [UART, PM25] Reading data...
19:50:31:923 -> [UART, PM25] Data not available.
19:50:31:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:923 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:923 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:944 -> [UART, PM25] Reading data...
19:50:31:944 -> [UART, PM25] Data not available.
19:50:31:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:944 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:944 -> [UART, PM25] Uart available, resetting event queue..
19:50:31:965 -> [UART, PM25] Reading data...
19:50:31:965 -> [UART, PM25] Data not available.
19:50:31:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:31:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:31:965 -> [UART, PM25] Uart available, clearing write errors..
19:50:31:965 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:001 -> [UART, PM25] Reading data...
19:50:32:004 -> [UART, PM25] Data not available.
19:50:32:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:004 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:004 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:007 -> [UART, PM25] Reading data...
19:50:32:007 -> [UART, PM25] Data not available.
19:50:32:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:007 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:007 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:028 -> [UART, PM25] Reading data...
19:50:32:028 -> [UART, PM25] Data not available.
19:50:32:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:028 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:028 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:028 -> PING!
19:50:32:252 -> [UART, PM25] Reading data...
19:50:32:252 -> [UART, PM25] Data not available.
19:50:32:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:273 -> [UART, PM25] Reading data...
19:50:32:273 -> [UART, PM25] Data not available.
19:50:32:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:294 -> [UART, PM25] Reading data...
19:50:32:294 -> [UART, PM25] Data not available.
19:50:32:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:315 -> [UART, PM25] Reading data...
19:50:32:315 -> [UART, PM25] Data not available.
19:50:32:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:315 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:315 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:336 -> [UART, PM25] Reading data...
19:50:32:336 -> [UART, PM25] Data not available.
19:50:32:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:336 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:336 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:357 -> [UART, PM25] Reading data...
19:50:32:357 -> [UART, PM25] Data not available.
19:50:32:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:357 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:357 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:378 -> [UART, PM25] Reading data...
19:50:32:378 -> [UART, PM25] Data not available.
19:50:32:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:378 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:378 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:399 -> [UART, PM25] Reading data...
19:50:32:399 -> [UART, PM25] Data not available.
19:50:32:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:399 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:399 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:420 -> [UART, PM25] Reading data...
19:50:32:421 -> [UART, PM25] Data not available.
19:50:32:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:421 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:421 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:441 -> [UART, PM25] Reading data...
19:50:32:441 -> [UART, PM25] Data not available.
19:50:32:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:441 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:441 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:462 -> [UART, PM25] Reading data...
19:50:32:462 -> [UART, PM25] Data not available.
19:50:32:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:484 -> [UART, PM25] Reading data...
19:50:32:484 -> [UART, PM25] Data not available.
19:50:32:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:484 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:484 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:515 -> [UART, PM25] Reading data...
19:50:32:516 -> [UART, PM25] Data not available.
19:50:32:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:516 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:516 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:525 -> [UART, PM25] Reading data...
19:50:32:525 -> [UART, PM25] Data not available.
19:50:32:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:546 -> [UART, PM25] Reading data...
19:50:32:546 -> [UART, PM25] Data not available.
19:50:32:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:567 -> [UART, PM25] Reading data...
19:50:32:568 -> [UART, PM25] Data not available.
19:50:32:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:568 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:568 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:588 -> [UART, PM25] Reading data...
19:50:32:588 -> [UART, PM25] Data not available.
19:50:32:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:588 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:588 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:609 -> [UART, PM25] Reading data...
19:50:32:609 -> [UART, PM25] Data not available.
19:50:32:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:630 -> [UART, PM25] Reading data...
19:50:32:630 -> [UART, PM25] Data not available.
19:50:32:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:651 -> [UART, PM25] Reading data...
19:50:32:651 -> [UART, PM25] Data not available.
19:50:32:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:651 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:651 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:672 -> [UART, PM25] Reading data...
19:50:32:672 -> [UART, PM25] Data not available.
19:50:32:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:672 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:672 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:693 -> [UART, PM25] Reading data...
19:50:32:693 -> [UART, PM25] Data not available.
19:50:32:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:693 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:693 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:714 -> [UART, PM25] Reading data...
19:50:32:714 -> [UART, PM25] Data not available.
19:50:32:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:714 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:714 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:735 -> [UART, PM25] Reading data...
19:50:32:735 -> [UART, PM25] Data not available.
19:50:32:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:756 -> [UART, PM25] Reading data...
19:50:32:756 -> [UART, PM25] Data not available.
19:50:32:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:756 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:756 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:777 -> [UART, PM25] Reading data...
19:50:32:777 -> [UART, PM25] Data not available.
19:50:32:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:798 -> [UART, PM25] Reading data...
19:50:32:798 -> [UART, PM25] Data not available.
19:50:32:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:819 -> [UART, PM25] Reading data...
19:50:32:819 -> [UART, PM25] Data not available.
19:50:32:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:840 -> [UART, PM25] Reading data...
19:50:32:840 -> [UART, PM25] Data not available.
19:50:32:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:841 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:841 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:861 -> [UART, PM25] Reading data...
19:50:32:861 -> [UART, PM25] Data not available.
19:50:32:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:861 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:861 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:882 -> [UART, PM25] Reading data...
19:50:32:883 -> [UART, PM25] Data not available.
19:50:32:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:903 -> [UART, PM25] Reading data...
19:50:32:903 -> [UART, PM25] Data not available.
19:50:32:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:903 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:903 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:924 -> [UART, PM25] Reading data...
19:50:32:924 -> [UART, PM25] Data not available.
19:50:32:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:945 -> [UART, PM25] Reading data...
19:50:32:945 -> [UART, PM25] Data not available.
19:50:32:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:945 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:945 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:966 -> [UART, PM25] Reading data...
19:50:32:966 -> [UART, PM25] Data not available.
19:50:32:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:32:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:32:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:32:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:32:999 -> [UART, PM25] Reading data...
19:50:33:039 -> [UART, PM25] Data not available.
19:50:33:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:039 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:039 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:039 -> [UART, PM25] Reading data...
19:50:33:039 -> [UART, PM25] Data not available.
19:50:33:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:039 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:039 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:040 -> [UART, PM25] Reading data...
19:50:33:040 -> [UART, PM25] Data not available.
19:50:33:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:040 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:040 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:050 -> [UART, PM25] Reading data...
19:50:33:050 -> [UART, PM25] Data not available.
19:50:33:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:050 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:050 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:071 -> [UART, PM25] Reading data...
19:50:33:071 -> [UART, PM25] Data not available.
19:50:33:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:071 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:071 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:092 -> [UART, PM25] Reading data...
19:50:33:092 -> [UART, PM25] Data not available.
19:50:33:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:092 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:092 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:113 -> [UART, PM25] Reading data...
19:50:33:113 -> [UART, PM25] Data not available.
19:50:33:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:113 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:113 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:134 -> [UART, PM25] Reading data...
19:50:33:134 -> [UART, PM25] Data not available.
19:50:33:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:134 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:134 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:155 -> [UART, PM25] Reading data...
19:50:33:155 -> [UART, PM25] Data not available.
19:50:33:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:155 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:155 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:176 -> [UART, PM25] Reading data...
19:50:33:176 -> [UART, PM25] Data not available.
19:50:33:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:176 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:176 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:197 -> [UART, PM25] Reading data...
19:50:33:197 -> [UART, PM25] Data not available.
19:50:33:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:197 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:197 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:218 -> [UART, PM25] Reading data...
19:50:33:218 -> [UART, PM25] Data not available.
19:50:33:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:218 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:218 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:239 -> [UART, PM25] Reading data...
19:50:33:239 -> [UART, PM25] Data not available.
19:50:33:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:239 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:239 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:260 -> [UART, PM25] Reading data...
19:50:33:260 -> [UART, PM25] Data not available.
19:50:33:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:260 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:260 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:281 -> [UART, PM25] Reading data...
19:50:33:281 -> [UART, PM25] Data not available.
19:50:33:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:281 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:281 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:302 -> [UART, PM25] Reading data...
19:50:33:302 -> [UART, PM25] Data not available.
19:50:33:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:323 -> [UART, PM25] Reading data...
19:50:33:323 -> [UART, PM25] Data not available.
19:50:33:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:323 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:323 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:344 -> [UART, PM25] Reading data...
19:50:33:344 -> [UART, PM25] Data not available.
19:50:33:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:344 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:344 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:365 -> [UART, PM25] Reading data...
19:50:33:365 -> [UART, PM25] Data not available.
19:50:33:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:365 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:365 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:386 -> [UART, PM25] Reading data...
19:50:33:386 -> [UART, PM25] Data not available.
19:50:33:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:386 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:386 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:407 -> [UART, PM25] Reading data...
19:50:33:407 -> [UART, PM25] Data not available.
19:50:33:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:407 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:407 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:428 -> [UART, PM25] Reading data...
19:50:33:428 -> [UART, PM25] Data not available.
19:50:33:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:428 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:428 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:449 -> [UART, PM25] Reading data...
19:50:33:450 -> [UART, PM25] Data not available.
19:50:33:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:450 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:450 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:470 -> [UART, PM25] Reading data...
19:50:33:470 -> [UART, PM25] Data not available.
19:50:33:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:470 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:470 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:491 -> [UART, PM25] Reading data...
19:50:33:491 -> [UART, PM25] Data not available.
19:50:33:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:491 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:491 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:512 -> [UART, PM25] Reading data...
19:50:33:512 -> [UART, PM25] Data not available.
19:50:33:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:512 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:512 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:533 -> [UART, PM25] Reading data...
19:50:33:533 -> [UART, PM25] Data not available.
19:50:33:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:533 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:533 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:555 -> [UART, PM25] Reading data...
19:50:33:556 -> [UART, PM25] Data not available.
19:50:33:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:556 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:556 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:575 -> [UART, PM25] Reading data...
19:50:33:575 -> [UART, PM25] Data not available.
19:50:33:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:575 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:575 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:596 -> [UART, PM25] Reading data...
19:50:33:596 -> [UART, PM25] Data not available.
19:50:33:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:596 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:596 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:617 -> [UART, PM25] Reading data...
19:50:33:617 -> [UART, PM25] Data not available.
19:50:33:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:638 -> [UART, PM25] Reading data...
19:50:33:638 -> [UART, PM25] Data not available.
19:50:33:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:638 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:638 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:659 -> [UART, PM25] Reading data...
19:50:33:659 -> [UART, PM25] Data not available.
19:50:33:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:659 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:659 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:680 -> [UART, PM25] Reading data...
19:50:33:680 -> [UART, PM25] Data not available.
19:50:33:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:680 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:680 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:701 -> [UART, PM25] Reading data...
19:50:33:701 -> [UART, PM25] Data not available.
19:50:33:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:701 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:701 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:722 -> [UART, PM25] Reading data...
19:50:33:722 -> [UART, PM25] Data not available.
19:50:33:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:722 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:722 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:743 -> [UART, PM25] Reading data...
19:50:33:743 -> [UART, PM25] Data not available.
19:50:33:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:743 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:743 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:764 -> [UART, PM25] Reading data...
19:50:33:765 -> [UART, PM25] Data not available.
19:50:33:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:765 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:765 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:785 -> [UART, PM25] Reading data...
19:50:33:785 -> [UART, PM25] Data not available.
19:50:33:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:785 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:785 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:806 -> [UART, PM25] Reading data...
19:50:33:806 -> [UART, PM25] Data not available.
19:50:33:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:827 -> [UART, PM25] Reading data...
19:50:33:827 -> [UART, PM25] Data not available.
19:50:33:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:827 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:827 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:848 -> [UART, PM25] Reading data...
19:50:33:848 -> [UART, PM25] Data not available.
19:50:33:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:848 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:848 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:869 -> [UART, PM25] Reading data...
19:50:33:869 -> [UART, PM25] Data not available.
19:50:33:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:869 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:869 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:890 -> [UART, PM25] Reading data...
19:50:33:890 -> [UART, PM25] Data not available.
19:50:33:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:890 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:890 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:911 -> [UART, PM25] Reading data...
19:50:33:911 -> [UART, PM25] Data not available.
19:50:33:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:911 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:911 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:932 -> [UART, PM25] Reading data...
19:50:33:932 -> [UART, PM25] Data not available.
19:50:33:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:932 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:932 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:953 -> [UART, PM25] Reading data...
19:50:33:953 -> [UART, PM25] Data not available.
19:50:33:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:953 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:953 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:974 -> [UART, PM25] Reading data...
19:50:33:974 -> [UART, PM25] Data not available.
19:50:33:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:974 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:974 -> [UART, PM25] Uart available, resetting event queue..
19:50:33:995 -> [UART, PM25] Reading data...
19:50:33:995 -> [UART, PM25] Data not available.
19:50:33:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:33:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:33:995 -> [UART, PM25] Uart available, clearing write errors..
19:50:33:995 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:016 -> [UART, PM25] Reading data...
19:50:34:016 -> [UART, PM25] Data not available.
19:50:34:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:016 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:016 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:037 -> [UART, PM25] Reading data...
19:50:34:037 -> [UART, PM25] Data not available.
19:50:34:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:037 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:037 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:067 -> [UART, PM25] Reading data...
19:50:34:068 -> [UART, PM25] Data not available.
19:50:34:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:068 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:068 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:079 -> [UART, PM25] Reading data...
19:50:34:079 -> [UART, PM25] Data not available.
19:50:34:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:079 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:079 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:100 -> [UART, PM25] Reading data...
19:50:34:100 -> [UART, PM25] Data not available.
19:50:34:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:100 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:100 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:121 -> [UART, PM25] Reading data...
19:50:34:121 -> [UART, PM25] Data not available.
19:50:34:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:121 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:121 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:142 -> [UART, PM25] Reading data...
19:50:34:142 -> [UART, PM25] Data not available.
19:50:34:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:163 -> [UART, PM25] Reading data...
19:50:34:163 -> [UART, PM25] Data not available.
19:50:34:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:163 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:163 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:184 -> [UART, PM25] Reading data...
19:50:34:184 -> [UART, PM25] Data not available.
19:50:34:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:184 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:184 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:205 -> [UART, PM25] Reading data...
19:50:34:205 -> [UART, PM25] Data not available.
19:50:34:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:205 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:205 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:226 -> [UART, PM25] Reading data...
19:50:34:226 -> [UART, PM25] Data not available.
19:50:34:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:226 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:226 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:247 -> [UART, PM25] Reading data...
19:50:34:247 -> [UART, PM25] Data not available.
19:50:34:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:247 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:247 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:268 -> [UART, PM25] Reading data...
19:50:34:268 -> [UART, PM25] Data not available.
19:50:34:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:268 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:268 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:289 -> [UART, PM25] Reading data...
19:50:34:289 -> [UART, PM25] Data not available.
19:50:34:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:289 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:289 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:310 -> [UART, PM25] Reading data...
19:50:34:310 -> [UART, PM25] Data not available.
19:50:34:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:310 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:310 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:331 -> [UART, PM25] Reading data...
19:50:34:331 -> [UART, PM25] Data not available.
19:50:34:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:331 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:331 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:352 -> [UART, PM25] Reading data...
19:50:34:352 -> [UART, PM25] Data not available.
19:50:34:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:352 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:352 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:373 -> [UART, PM25] Reading data...
19:50:34:373 -> [UART, PM25] Data not available.
19:50:34:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:373 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:373 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:394 -> [UART, PM25] Reading data...
19:50:34:394 -> [UART, PM25] Data not available.
19:50:34:394 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:394 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:394 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:394 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:415 -> [UART, PM25] Reading data...
19:50:34:415 -> [UART, PM25] Data not available.
19:50:34:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:415 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:415 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:436 -> [UART, PM25] Reading data...
19:50:34:436 -> [UART, PM25] Data not available.
19:50:34:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:436 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:436 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:457 -> [UART, PM25] Reading data...
19:50:34:457 -> [UART, PM25] Data not available.
19:50:34:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:457 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:457 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:478 -> [UART, PM25] Reading data...
19:50:34:478 -> [UART, PM25] Data not available.
19:50:34:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:478 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:478 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:499 -> [UART, PM25] Reading data...
19:50:34:499 -> [UART, PM25] Data not available.
19:50:34:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:499 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:499 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:520 -> [UART, PM25] Reading data...
19:50:34:520 -> [UART, PM25] Data not available.
19:50:34:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:520 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:520 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:541 -> [UART, PM25] Reading data...
19:50:34:542 -> [UART, PM25] Data not available.
19:50:34:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:542 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:542 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:562 -> [UART, PM25] Reading data...
19:50:34:562 -> [UART, PM25] Data not available.
19:50:34:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:562 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:562 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:583 -> [UART, PM25] Reading data...
19:50:34:583 -> [UART, PM25] Data not available.
19:50:34:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:583 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:583 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:604 -> [UART, PM25] Reading data...
19:50:34:604 -> [UART, PM25] Data not available.
19:50:34:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:604 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:604 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:625 -> [UART, PM25] Reading data...
19:50:34:625 -> [UART, PM25] Data not available.
19:50:34:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:625 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:625 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:646 -> [UART, PM25] Reading data...
19:50:34:646 -> [UART, PM25] Data not available.
19:50:34:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:646 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:646 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:667 -> [UART, PM25] Reading data...
19:50:34:667 -> [UART, PM25] Data not available.
19:50:34:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:667 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:667 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:688 -> [UART, PM25] Reading data...
19:50:34:688 -> [UART, PM25] Data not available.
19:50:34:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:688 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:688 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:709 -> [UART, PM25] Reading data...
19:50:34:710 -> [UART, PM25] Data not available.
19:50:34:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:710 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:710 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:730 -> [UART, PM25] Reading data...
19:50:34:730 -> [UART, PM25] Data not available.
19:50:34:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:730 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:730 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:751 -> [UART, PM25] Reading data...
19:50:34:751 -> [UART, PM25] Data not available.
19:50:34:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:751 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:751 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:791 -> [UART, PM25] Reading data...
19:50:34:806 -> [UART, PM25] Data not available.
19:50:34:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:806 -> [UART, PM25] Reading data...
19:50:34:806 -> [UART, PM25] Data not available.
19:50:34:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:814 -> [UART, PM25] Reading data...
19:50:34:814 -> [UART, PM25] Data not available.
19:50:34:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:814 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:814 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:835 -> [UART, PM25] Reading data...
19:50:34:835 -> [UART, PM25] Data not available.
19:50:34:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:835 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:835 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:856 -> [UART, PM25] Reading data...
19:50:34:856 -> [UART, PM25] Data not available.
19:50:34:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:856 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:856 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:877 -> [UART, PM25] Reading data...
19:50:34:877 -> [UART, PM25] Data not available.
19:50:34:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:877 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:877 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:898 -> [UART, PM25] Reading data...
19:50:34:898 -> [UART, PM25] Data not available.
19:50:34:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:898 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:898 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:919 -> [UART, PM25] Reading data...
19:50:34:919 -> [UART, PM25] Data not available.
19:50:34:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:919 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:919 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:940 -> [UART, PM25] Reading data...
19:50:34:940 -> [UART, PM25] Data not available.
19:50:34:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:940 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:940 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:961 -> [UART, PM25] Reading data...
19:50:34:961 -> [UART, PM25] Data not available.
19:50:34:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:961 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:961 -> [UART, PM25] Uart available, resetting event queue..
19:50:34:982 -> [UART, PM25] Reading data...
19:50:34:982 -> [UART, PM25] Data not available.
19:50:34:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:34:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:34:982 -> [UART, PM25] Uart available, clearing write errors..
19:50:34:982 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:003 -> [UART, PM25] Reading data...
19:50:35:003 -> [UART, PM25] Data not available.
19:50:35:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:003 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:003 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:024 -> [UART, PM25] Reading data...
19:50:35:024 -> [UART, PM25] Data not available.
19:50:35:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:025 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:025 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:045 -> [UART, PM25] Reading data...
19:50:35:045 -> [UART, PM25] Data not available.
19:50:35:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:045 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:045 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:066 -> [UART, PM25] Reading data...
19:50:35:066 -> [UART, PM25] Data not available.
19:50:35:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:066 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:066 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:098 -> [UART, PM25] Reading data...
19:50:35:099 -> [UART, PM25] Data not available.
19:50:35:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:099 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:099 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:108 -> [UART, PM25] Reading data...
19:50:35:108 -> [UART, PM25] Data not available.
19:50:35:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:108 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:108 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:129 -> [UART, PM25] Reading data...
19:50:35:129 -> [UART, PM25] Data not available.
19:50:35:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:129 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:129 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:150 -> [UART, PM25] Reading data...
19:50:35:150 -> [UART, PM25] Data not available.
19:50:35:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:150 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:150 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:171 -> [UART, PM25] Reading data...
19:50:35:171 -> [UART, PM25] Data not available.
19:50:35:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:171 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:171 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:192 -> [UART, PM25] Reading data...
19:50:35:192 -> [UART, PM25] Data not available.
19:50:35:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:192 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:192 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:213 -> [UART, PM25] Reading data...
19:50:35:213 -> [UART, PM25] Data not available.
19:50:35:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:213 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:213 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:234 -> [UART, PM25] Reading data...
19:50:35:234 -> [UART, PM25] Data not available.
19:50:35:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:234 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:234 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:255 -> [UART, PM25] Reading data...
19:50:35:255 -> [UART, PM25] Data not available.
19:50:35:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:255 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:255 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:276 -> [UART, PM25] Reading data...
19:50:35:277 -> [UART, PM25] Data not available.
19:50:35:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:277 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:277 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:297 -> [UART, PM25] Reading data...
19:50:35:297 -> [UART, PM25] Data not available.
19:50:35:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:297 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:297 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:318 -> [UART, PM25] Reading data...
19:50:35:318 -> [UART, PM25] Data not available.
19:50:35:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:318 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:318 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:339 -> [UART, PM25] Reading data...
19:50:35:339 -> [UART, PM25] Data not available.
19:50:35:339 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:339 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:339 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:339 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:360 -> [UART, PM25] Reading data...
19:50:35:360 -> [UART, PM25] Data not available.
19:50:35:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:360 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:360 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:381 -> [UART, PM25] Reading data...
19:50:35:382 -> [UART, PM25] Data not available.
19:50:35:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:382 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:382 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:402 -> [UART, PM25] Reading data...
19:50:35:403 -> [UART, PM25] Data not available.
19:50:35:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:403 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:403 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:423 -> [UART, PM25] Reading data...
19:50:35:423 -> [UART, PM25] Data not available.
19:50:35:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:423 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:423 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:444 -> [UART, PM25] Reading data...
19:50:35:444 -> [UART, PM25] Data not available.
19:50:35:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:444 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:444 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:465 -> [UART, PM25] Reading data...
19:50:35:465 -> [UART, PM25] Data not available.
19:50:35:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:465 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:465 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:486 -> [UART, PM25] Reading data...
19:50:35:486 -> [UART, PM25] Data not available.
19:50:35:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:486 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:486 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:507 -> [UART, PM25] Reading data...
19:50:35:507 -> [UART, PM25] Data not available.
19:50:35:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:507 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:507 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:528 -> [UART, PM25] Reading data...
19:50:35:528 -> [UART, PM25] Data not available.
19:50:35:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:528 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:528 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:549 -> [UART, PM25] Reading data...
19:50:35:549 -> [UART, PM25] Data not available.
19:50:35:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:549 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:549 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:570 -> [UART, PM25] Reading data...
19:50:35:570 -> [UART, PM25] Data not available.
19:50:35:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:570 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:570 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:591 -> [UART, PM25] Reading data...
19:50:35:591 -> [UART, PM25] Data not available.
19:50:35:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:591 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:591 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:621 -> [UART, PM25] Reading data...
19:50:35:621 -> [UART, PM25] Data not available.
19:50:35:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:621 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:621 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:633 -> [UART, PM25] Reading data...
19:50:35:633 -> [UART, PM25] Data not available.
19:50:35:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:633 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:633 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:654 -> [UART, PM25] Reading data...
19:50:35:654 -> [UART, PM25] Data not available.
19:50:35:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:654 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:654 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:675 -> [UART, PM25] Reading data...
19:50:35:675 -> [UART, PM25] Data not available.
19:50:35:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:675 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:675 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:696 -> [UART, PM25] Reading data...
19:50:35:696 -> [UART, PM25] Data not available.
19:50:35:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:696 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:696 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:717 -> [UART, PM25] Reading data...
19:50:35:717 -> [UART, PM25] Data not available.
19:50:35:717 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:717 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:717 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:717 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:738 -> [UART, PM25] Reading data...
19:50:35:738 -> [UART, PM25] Data not available.
19:50:35:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:738 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:738 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:759 -> [UART, PM25] Reading data...
19:50:35:759 -> [UART, PM25] Data not available.
19:50:35:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:759 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:759 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:780 -> [UART, PM25] Reading data...
19:50:35:780 -> [UART, PM25] Data not available.
19:50:35:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:780 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:780 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:801 -> [UART, PM25] Reading data...
19:50:35:801 -> [UART, PM25] Data not available.
19:50:35:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:801 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:801 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:822 -> [UART, PM25] Reading data...
19:50:35:822 -> [UART, PM25] Data not available.
19:50:35:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:822 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:822 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:843 -> [UART, PM25] Reading data...
19:50:35:843 -> [UART, PM25] Data not available.
19:50:35:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:843 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:843 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:864 -> [UART, PM25] Reading data...
19:50:35:864 -> [UART, PM25] Data not available.
19:50:35:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:864 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:864 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:885 -> [UART, PM25] Reading data...
19:50:35:885 -> [UART, PM25] Data not available.
19:50:35:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:885 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:885 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:906 -> [UART, PM25] Reading data...
19:50:35:907 -> [UART, PM25] Data not available.
19:50:35:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:907 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:907 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:927 -> [UART, PM25] Reading data...
19:50:35:927 -> [UART, PM25] Data not available.
19:50:35:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:927 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:927 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:948 -> [UART, PM25] Reading data...
19:50:35:948 -> [UART, PM25] Data not available.
19:50:35:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:948 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:948 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:969 -> [UART, PM25] Reading data...
19:50:35:969 -> [UART, PM25] Data not available.
19:50:35:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:969 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:969 -> [UART, PM25] Uart available, resetting event queue..
19:50:35:990 -> [UART, PM25] Reading data...
19:50:35:990 -> [UART, PM25] Data not available.
19:50:35:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:35:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:35:990 -> [UART, PM25] Uart available, clearing write errors..
19:50:35:990 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:011 -> [UART, PM25] Reading data...
19:50:36:011 -> [UART, PM25] Data not available.
19:50:36:011 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:011 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:011 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:011 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:032 -> [UART, PM25] Reading data...
19:50:36:033 -> [UART, PM25] Data not available.
19:50:36:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:033 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:033 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:053 -> [UART, PM25] Reading data...
19:50:36:053 -> [UART, PM25] Data not available.
19:50:36:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:053 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:053 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:074 -> [UART, PM25] Reading data...
19:50:36:074 -> [UART, PM25] Data not available.
19:50:36:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:074 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:074 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:095 -> [UART, PM25] Reading data...
19:50:36:095 -> [UART, PM25] Data not available.
19:50:36:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:095 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:095 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:116 -> [UART, PM25] Reading data...
19:50:36:116 -> [UART, PM25] Data not available.
19:50:36:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:116 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:116 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:141 -> [UART, PM25] Reading data...
19:50:36:143 -> [UART, PM25] Data not available.
19:50:36:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:158 -> [UART, PM25] Reading data...
19:50:36:158 -> [UART, PM25] Data not available.
19:50:36:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:158 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:158 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:179 -> [UART, PM25] Reading data...
19:50:36:179 -> [UART, PM25] Data not available.
19:50:36:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:179 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:179 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:200 -> [UART, PM25] Reading data...
19:50:36:200 -> [UART, PM25] Data not available.
19:50:36:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:200 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:200 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:221 -> [UART, PM25] Reading data...
19:50:36:221 -> [UART, PM25] Data not available.
19:50:36:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:221 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:221 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:242 -> [UART, PM25] Reading data...
19:50:36:242 -> [UART, PM25] Data not available.
19:50:36:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:242 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:242 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:263 -> [UART, PM25] Reading data...
19:50:36:263 -> [UART, PM25] Data not available.
19:50:36:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:263 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:263 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:284 -> [UART, PM25] Reading data...
19:50:36:284 -> [UART, PM25] Data not available.
19:50:36:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:284 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:284 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:305 -> [UART, PM25] Reading data...
19:50:36:305 -> [UART, PM25] Data not available.
19:50:36:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:305 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:305 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:326 -> [UART, PM25] Reading data...
19:50:36:326 -> [UART, PM25] Data not available.
19:50:36:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:326 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:326 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:347 -> [UART, PM25] Reading data...
19:50:36:348 -> [UART, PM25] Data not available.
19:50:36:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:348 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:348 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:368 -> [UART, PM25] Reading data...
19:50:36:368 -> [UART, PM25] Data not available.
19:50:36:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:368 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:368 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:389 -> [UART, PM25] Reading data...
19:50:36:389 -> [UART, PM25] Data not available.
19:50:36:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:389 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:389 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:410 -> [UART, PM25] Reading data...
19:50:36:410 -> [UART, PM25] Data not available.
19:50:36:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:410 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:410 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:431 -> [UART, PM25] Reading data...
19:50:36:431 -> [UART, PM25] Data not available.
19:50:36:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:431 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:431 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:452 -> [UART, PM25] Reading data...
19:50:36:452 -> [UART, PM25] Data not available.
19:50:36:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:452 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:452 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:473 -> [UART, PM25] Reading data...
19:50:36:473 -> [UART, PM25] Data not available.
19:50:36:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:473 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:473 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:494 -> [UART, PM25] Reading data...
19:50:36:494 -> [UART, PM25] Data not available.
19:50:36:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:494 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:494 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:550 -> [UART, PM25] Reading data...
19:50:36:563 -> [UART, PM25] Data not available.
19:50:36:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:563 -> [UART, PM25] Reading data...
19:50:36:563 -> [UART, PM25] Data not available.
19:50:36:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:563 -> [UART, PM25] Reading data...
19:50:36:563 -> [UART, PM25] Data not available.
19:50:36:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:578 -> [UART, PM25] Reading data...
19:50:36:578 -> [UART, PM25] Data not available.
19:50:36:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:578 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:578 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:599 -> [UART, PM25] Reading data...
19:50:36:599 -> [UART, PM25] Data not available.
19:50:36:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:599 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:599 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:620 -> [UART, PM25] Reading data...
19:50:36:620 -> [UART, PM25] Data not available.
19:50:36:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:620 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:620 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:641 -> [UART, PM25] Reading data...
19:50:36:653 -> [UART, PM25] Data not available.
19:50:36:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:653 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:653 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:662 -> [UART, PM25] Reading data...
19:50:36:662 -> [UART, PM25] Data not available.
19:50:36:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:662 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:662 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:683 -> [UART, PM25] Reading data...
19:50:36:683 -> [UART, PM25] Data not available.
19:50:36:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:683 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:683 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:704 -> [UART, PM25] Reading data...
19:50:36:704 -> [UART, PM25] Data not available.
19:50:36:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:704 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:704 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:725 -> [UART, PM25] Reading data...
19:50:36:725 -> [UART, PM25] Data not available.
19:50:36:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:725 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:725 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:746 -> [UART, PM25] Reading data...
19:50:36:746 -> [UART, PM25] Data not available.
19:50:36:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:746 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:746 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:746 -> PING!
19:50:36:960 -> [UART, PM25] Reading data...
19:50:36:960 -> [UART, PM25] Data not available.
19:50:36:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:960 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:960 -> [UART, PM25] Uart available, resetting event queue..
19:50:36:981 -> [UART, PM25] Reading data...
19:50:36:981 -> [UART, PM25] Data not available.
19:50:36:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:36:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:36:981 -> [UART, PM25] Uart available, clearing write errors..
19:50:36:981 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:002 -> [UART, PM25] Reading data...
19:50:37:002 -> [UART, PM25] Data not available.
19:50:37:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:002 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:002 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:023 -> [UART, PM25] Reading data...
19:50:37:023 -> [UART, PM25] Data not available.
19:50:37:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:023 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:023 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:044 -> [UART, PM25] Reading data...
19:50:37:044 -> [UART, PM25] Data not available.
19:50:37:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:044 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:044 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:065 -> [UART, PM25] Reading data...
19:50:37:066 -> [UART, PM25] Data not available.
19:50:37:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:066 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:066 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:086 -> [UART, PM25] Reading data...
19:50:37:086 -> [UART, PM25] Data not available.
19:50:37:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:086 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:086 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:107 -> [UART, PM25] Reading data...
19:50:37:107 -> [UART, PM25] Data not available.
19:50:37:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:107 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:107 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:128 -> [UART, PM25] Reading data...
19:50:37:128 -> [UART, PM25] Data not available.
19:50:37:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:128 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:128 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:149 -> [UART, PM25] Reading data...
19:50:37:149 -> [UART, PM25] Data not available.
19:50:37:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:149 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:149 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:170 -> [UART, PM25] Reading data...
19:50:37:172 -> [UART, PM25] Data not available.
19:50:37:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:172 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:172 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:191 -> [UART, PM25] Reading data...
19:50:37:191 -> [UART, PM25] Data not available.
19:50:37:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:191 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:191 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:212 -> [UART, PM25] Reading data...
19:50:37:212 -> [UART, PM25] Data not available.
19:50:37:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:212 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:212 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:233 -> [UART, PM25] Reading data...
19:50:37:233 -> [UART, PM25] Data not available.
19:50:37:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:233 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:233 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:254 -> [UART, PM25] Reading data...
19:50:37:254 -> [UART, PM25] Data not available.
19:50:37:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:254 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:254 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:275 -> [UART, PM25] Reading data...
19:50:37:275 -> [UART, PM25] Data not available.
19:50:37:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:275 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:275 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:296 -> [UART, PM25] Reading data...
19:50:37:296 -> [UART, PM25] Data not available.
19:50:37:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:296 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:296 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:317 -> [UART, PM25] Reading data...
19:50:37:317 -> [UART, PM25] Data not available.
19:50:37:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:317 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:317 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:338 -> [UART, PM25] Reading data...
19:50:37:338 -> [UART, PM25] Data not available.
19:50:37:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:338 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:338 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:359 -> [UART, PM25] Reading data...
19:50:37:360 -> [UART, PM25] Data not available.
19:50:37:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:360 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:360 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:380 -> [UART, PM25] Reading data...
19:50:37:380 -> [UART, PM25] Data not available.
19:50:37:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:380 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:380 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:401 -> [UART, PM25] Reading data...
19:50:37:401 -> [UART, PM25] Data not available.
19:50:37:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:401 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:401 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:422 -> [UART, PM25] Reading data...
19:50:37:423 -> [UART, PM25] Data not available.
19:50:37:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:423 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:423 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:444 -> [UART, PM25] Reading data...
19:50:37:444 -> [UART, PM25] Data not available.
19:50:37:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:445 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:445 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:465 -> [UART, PM25] Reading data...
19:50:37:465 -> [UART, PM25] Data not available.
19:50:37:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:465 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:465 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:486 -> [UART, PM25] Reading data...
19:50:37:486 -> [UART, PM25] Data not available.
19:50:37:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:486 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:486 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:507 -> [UART, PM25] Reading data...
19:50:37:507 -> [UART, PM25] Data not available.
19:50:37:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:507 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:507 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:528 -> [UART, PM25] Reading data...
19:50:37:528 -> [UART, PM25] Data not available.
19:50:37:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:528 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:528 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:549 -> [UART, PM25] Reading data...
19:50:37:549 -> [UART, PM25] Data not available.
19:50:37:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:549 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:549 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:570 -> [UART, PM25] Reading data...
19:50:37:570 -> [UART, PM25] Data not available.
19:50:37:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:570 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:570 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:591 -> [UART, PM25] Reading data...
19:50:37:591 -> [UART, PM25] Data not available.
19:50:37:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:591 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:591 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:612 -> [UART, PM25] Reading data...
19:50:37:612 -> [UART, PM25] Data not available.
19:50:37:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:612 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:612 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:633 -> [UART, PM25] Reading data...
19:50:37:633 -> [UART, PM25] Data not available.
19:50:37:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:633 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:633 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:654 -> [UART, PM25] Reading data...
19:50:37:654 -> [UART, PM25] Data not available.
19:50:37:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:654 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:654 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:684 -> [UART, PM25] Reading data...
19:50:37:685 -> [UART, PM25] Data not available.
19:50:37:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:696 -> [UART, PM25] Reading data...
19:50:37:696 -> [UART, PM25] Data not available.
19:50:37:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:696 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:696 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:717 -> [UART, PM25] Reading data...
19:50:37:717 -> [UART, PM25] Data not available.
19:50:37:717 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:717 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:717 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:717 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:738 -> [UART, PM25] Reading data...
19:50:37:738 -> [UART, PM25] Data not available.
19:50:37:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:738 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:738 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:759 -> [UART, PM25] Reading data...
19:50:37:759 -> [UART, PM25] Data not available.
19:50:37:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:759 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:759 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:780 -> [UART, PM25] Reading data...
19:50:37:780 -> [UART, PM25] Data not available.
19:50:37:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:780 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:780 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:801 -> [UART, PM25] Reading data...
19:50:37:801 -> [UART, PM25] Data not available.
19:50:37:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:801 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:801 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:822 -> [UART, PM25] Reading data...
19:50:37:822 -> [UART, PM25] Data not available.
19:50:37:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:822 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:822 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:843 -> [UART, PM25] Reading data...
19:50:37:843 -> [UART, PM25] Data not available.
19:50:37:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:843 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:843 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:864 -> [UART, PM25] Reading data...
19:50:37:865 -> [UART, PM25] Data not available.
19:50:37:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:865 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:865 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:885 -> [UART, PM25] Reading data...
19:50:37:885 -> [UART, PM25] Data not available.
19:50:37:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:885 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:885 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:906 -> [UART, PM25] Reading data...
19:50:37:906 -> [UART, PM25] Data not available.
19:50:37:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:906 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:906 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:927 -> [UART, PM25] Reading data...
19:50:37:927 -> [UART, PM25] Data not available.
19:50:37:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:927 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:927 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:948 -> [UART, PM25] Reading data...
19:50:37:948 -> [UART, PM25] Data not available.
19:50:37:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:948 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:948 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:969 -> [UART, PM25] Reading data...
19:50:37:969 -> [UART, PM25] Data not available.
19:50:37:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:969 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:969 -> [UART, PM25] Uart available, resetting event queue..
19:50:37:990 -> [UART, PM25] Reading data...
19:50:37:990 -> [UART, PM25] Data not available.
19:50:37:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:37:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:37:990 -> [UART, PM25] Uart available, clearing write errors..
19:50:37:990 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:011 -> [UART, PM25] Reading data...
19:50:38:012 -> [UART, PM25] Data not available.
19:50:38:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:012 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:012 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:032 -> [UART, PM25] Reading data...
19:50:38:032 -> [UART, PM25] Data not available.
19:50:38:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:032 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:032 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:053 -> [UART, PM25] Reading data...
19:50:38:053 -> [UART, PM25] Data not available.
19:50:38:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:053 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:053 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:074 -> [UART, PM25] Reading data...
19:50:38:074 -> [UART, PM25] Data not available.
19:50:38:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:074 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:074 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:095 -> [UART, PM25] Reading data...
19:50:38:095 -> [UART, PM25] Data not available.
19:50:38:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:095 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:095 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:116 -> [UART, PM25] Reading data...
19:50:38:116 -> [UART, PM25] Data not available.
19:50:38:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:116 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:116 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:137 -> [UART, PM25] Reading data...
19:50:38:138 -> [UART, PM25] Data not available.
19:50:38:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:138 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:138 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:158 -> [UART, PM25] Reading data...
19:50:38:158 -> [UART, PM25] Data not available.
19:50:38:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:158 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:158 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:179 -> [UART, PM25] Reading data...
19:50:38:179 -> [UART, PM25] Data not available.
19:50:38:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:179 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:179 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:202 -> [UART, PM25] Reading data...
19:50:38:202 -> [UART, PM25] Data not available.
19:50:38:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:221 -> [UART, PM25] Reading data...
19:50:38:221 -> [UART, PM25] Data not available.
19:50:38:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:221 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:221 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:242 -> [UART, PM25] Reading data...
19:50:38:242 -> [UART, PM25] Data not available.
19:50:38:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:242 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:242 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:263 -> [UART, PM25] Reading data...
19:50:38:263 -> [UART, PM25] Data not available.
19:50:38:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:263 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:263 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:284 -> [UART, PM25] Reading data...
19:50:38:284 -> [UART, PM25] Data not available.
19:50:38:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:284 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:284 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:305 -> [UART, PM25] Reading data...
19:50:38:305 -> [UART, PM25] Data not available.
19:50:38:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:305 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:305 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:326 -> [UART, PM25] Reading data...
19:50:38:326 -> [UART, PM25] Data not available.
19:50:38:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:326 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:326 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:347 -> [UART, PM25] Reading data...
19:50:38:347 -> [UART, PM25] Data not available.
19:50:38:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:347 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:347 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:368 -> [UART, PM25] Reading data...
19:50:38:368 -> [UART, PM25] Data not available.
19:50:38:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:368 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:368 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:389 -> [UART, PM25] Reading data...
19:50:38:389 -> [UART, PM25] Data not available.
19:50:38:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:389 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:389 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:410 -> [UART, PM25] Reading data...
19:50:38:410 -> [UART, PM25] Data not available.
19:50:38:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:410 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:410 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:431 -> [UART, PM25] Reading data...
19:50:38:431 -> [UART, PM25] Data not available.
19:50:38:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:431 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:431 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:452 -> [UART, PM25] Reading data...
19:50:38:452 -> [UART, PM25] Data not available.
19:50:38:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:452 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:452 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:473 -> [UART, PM25] Reading data...
19:50:38:473 -> [UART, PM25] Data not available.
19:50:38:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:473 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:473 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:494 -> [UART, PM25] Reading data...
19:50:38:494 -> [UART, PM25] Data not available.
19:50:38:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:494 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:494 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:515 -> [UART, PM25] Reading data...
19:50:38:516 -> [UART, PM25] Data not available.
19:50:38:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:516 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:516 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:536 -> [UART, PM25] Reading data...
19:50:38:536 -> [UART, PM25] Data not available.
19:50:38:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:536 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:536 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:557 -> [UART, PM25] Reading data...
19:50:38:557 -> [UART, PM25] Data not available.
19:50:38:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:557 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:557 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:595 -> [UART, PM25] Reading data...
19:50:38:613 -> [UART, PM25] Data not available.
19:50:38:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:613 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:613 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:613 -> [UART, PM25] Reading data...
19:50:38:613 -> [UART, PM25] Data not available.
19:50:38:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:613 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:613 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:620 -> [UART, PM25] Reading data...
19:50:38:628 -> [UART, PM25] Data not available.
19:50:38:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:628 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:628 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:641 -> [UART, PM25] Reading data...
19:50:38:641 -> [UART, PM25] Data not available.
19:50:38:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:641 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:641 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:662 -> [UART, PM25] Reading data...
19:50:38:662 -> [UART, PM25] Data not available.
19:50:38:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:662 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:662 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:683 -> [UART, PM25] Reading data...
19:50:38:683 -> [UART, PM25] Data not available.
19:50:38:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:683 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:683 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:717 -> [UART, PM25] Reading data...
19:50:38:718 -> [UART, PM25] Data not available.
19:50:38:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:718 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:718 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:725 -> [UART, PM25] Reading data...
19:50:38:725 -> [UART, PM25] Data not available.
19:50:38:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:725 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:725 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:746 -> [UART, PM25] Reading data...
19:50:38:746 -> [UART, PM25] Data not available.
19:50:38:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:746 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:746 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:767 -> [UART, PM25] Reading data...
19:50:38:767 -> [UART, PM25] Data not available.
19:50:38:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:767 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:767 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:788 -> [UART, PM25] Reading data...
19:50:38:788 -> [UART, PM25] Data not available.
19:50:38:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:788 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:788 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:808 -> [UART, PM25] Reading data...
19:50:38:809 -> [UART, PM25] Data not available.
19:50:38:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:809 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:809 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:830 -> [UART, PM25] Reading data...
19:50:38:830 -> [UART, PM25] Data not available.
19:50:38:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:830 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:830 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:851 -> [UART, PM25] Reading data...
19:50:38:851 -> [UART, PM25] Data not available.
19:50:38:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:851 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:851 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:872 -> [UART, PM25] Reading data...
19:50:38:872 -> [UART, PM25] Data not available.
19:50:38:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:872 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:872 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:893 -> [UART, PM25] Reading data...
19:50:38:893 -> [UART, PM25] Data not available.
19:50:38:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:893 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:893 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:914 -> [UART, PM25] Reading data...
19:50:38:914 -> [UART, PM25] Data not available.
19:50:38:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:914 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:914 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:935 -> [UART, PM25] Reading data...
19:50:38:935 -> [UART, PM25] Data not available.
19:50:38:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:935 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:935 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:956 -> [UART, PM25] Reading data...
19:50:38:956 -> [UART, PM25] Data not available.
19:50:38:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:956 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:956 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:977 -> [UART, PM25] Reading data...
19:50:38:977 -> [UART, PM25] Data not available.
19:50:38:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:977 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:977 -> [UART, PM25] Uart available, resetting event queue..
19:50:38:998 -> [UART, PM25] Reading data...
19:50:38:998 -> [UART, PM25] Data not available.
19:50:38:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:38:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:38:998 -> [UART, PM25] Uart available, clearing write errors..
19:50:38:998 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:019 -> [UART, PM25] Reading data...
19:50:39:019 -> [UART, PM25] Data not available.
19:50:39:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:019 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:019 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:039 -> [UART, PM25] Reading data...
19:50:39:040 -> [UART, PM25] Data not available.
19:50:39:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:040 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:040 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:061 -> [UART, PM25] Reading data...
19:50:39:061 -> [UART, PM25] Data not available.
19:50:39:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:061 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:061 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:082 -> [UART, PM25] Reading data...
19:50:39:082 -> [UART, PM25] Data not available.
19:50:39:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:082 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:082 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:103 -> [UART, PM25] Reading data...
19:50:39:103 -> [UART, PM25] Data not available.
19:50:39:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:103 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:103 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:124 -> [UART, PM25] Reading data...
19:50:39:124 -> [UART, PM25] Data not available.
19:50:39:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:124 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:124 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:145 -> [UART, PM25] Reading data...
19:50:39:145 -> [UART, PM25] Data not available.
19:50:39:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:145 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:145 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:166 -> [UART, PM25] Reading data...
19:50:39:166 -> [UART, PM25] Data not available.
19:50:39:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:166 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:166 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:187 -> [UART, PM25] Reading data...
19:50:39:187 -> [UART, PM25] Data not available.
19:50:39:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:187 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:187 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:208 -> [UART, PM25] Reading data...
19:50:39:208 -> [UART, PM25] Data not available.
19:50:39:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:208 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:208 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:231 -> [UART, PM25] Reading data...
19:50:39:231 -> [UART, PM25] Data not available.
19:50:39:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:231 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:231 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:250 -> [UART, PM25] Reading data...
19:50:39:250 -> [UART, PM25] Data not available.
19:50:39:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:250 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:250 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:271 -> [UART, PM25] Reading data...
19:50:39:271 -> [UART, PM25] Data not available.
19:50:39:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:271 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:271 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:292 -> [UART, PM25] Reading data...
19:50:39:292 -> [UART, PM25] Data not available.
19:50:39:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:292 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:292 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:313 -> [UART, PM25] Reading data...
19:50:39:313 -> [UART, PM25] Data not available.
19:50:39:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:313 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:313 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:334 -> [UART, PM25] Reading data...
19:50:39:334 -> [UART, PM25] Data not available.
19:50:39:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:334 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:334 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:355 -> [UART, PM25] Reading data...
19:50:39:355 -> [UART, PM25] Data not available.
19:50:39:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:355 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:355 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:376 -> [UART, PM25] Reading data...
19:50:39:376 -> [UART, PM25] Data not available.
19:50:39:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:376 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:376 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:397 -> [UART, PM25] Reading data...
19:50:39:397 -> [UART, PM25] Data not available.
19:50:39:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:397 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:397 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:418 -> [UART, PM25] Reading data...
19:50:39:418 -> [UART, PM25] Data not available.
19:50:39:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:418 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:418 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:439 -> [UART, PM25] Reading data...
19:50:39:439 -> [UART, PM25] Data not available.
19:50:39:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:439 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:439 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:460 -> [UART, PM25] Reading data...
19:50:39:460 -> [UART, PM25] Data not available.
19:50:39:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:460 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:460 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:481 -> [UART, PM25] Reading data...
19:50:39:481 -> [UART, PM25] Data not available.
19:50:39:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:481 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:481 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:502 -> [UART, PM25] Reading data...
19:50:39:502 -> [UART, PM25] Data not available.
19:50:39:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:502 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:502 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:523 -> [UART, PM25] Reading data...
19:50:39:523 -> [UART, PM25] Data not available.
19:50:39:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:523 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:523 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:544 -> [UART, PM25] Reading data...
19:50:39:544 -> [UART, PM25] Data not available.
19:50:39:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:544 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:544 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:565 -> [UART, PM25] Reading data...
19:50:39:565 -> [UART, PM25] Data not available.
19:50:39:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:565 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:565 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:586 -> [UART, PM25] Reading data...
19:50:39:586 -> [UART, PM25] Data not available.
19:50:39:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:586 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:586 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:607 -> [UART, PM25] Reading data...
19:50:39:607 -> [UART, PM25] Data not available.
19:50:39:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:607 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:607 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:628 -> [UART, PM25] Reading data...
19:50:39:628 -> [UART, PM25] Data not available.
19:50:39:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:628 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:628 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:649 -> [UART, PM25] Reading data...
19:50:39:649 -> [UART, PM25] Data not available.
19:50:39:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:649 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:649 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:670 -> [UART, PM25] Reading data...
19:50:39:670 -> [UART, PM25] Data not available.
19:50:39:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:670 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:670 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:691 -> [UART, PM25] Reading data...
19:50:39:691 -> [UART, PM25] Data not available.
19:50:39:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:691 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:691 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:712 -> [UART, PM25] Reading data...
19:50:39:712 -> [UART, PM25] Data not available.
19:50:39:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:712 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:712 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:746 -> [UART, PM25] Reading data...
19:50:39:746 -> [UART, PM25] Data not available.
19:50:39:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:746 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:746 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:754 -> [UART, PM25] Reading data...
19:50:39:754 -> [UART, PM25] Data not available.
19:50:39:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:754 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:754 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:775 -> [UART, PM25] Reading data...
19:50:39:775 -> [UART, PM25] Data not available.
19:50:39:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:775 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:775 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:796 -> [UART, PM25] Reading data...
19:50:39:796 -> [UART, PM25] Data not available.
19:50:39:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:796 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:796 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:818 -> [UART, PM25] Reading data...
19:50:39:819 -> [UART, PM25] Data not available.
19:50:39:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:838 -> [UART, PM25] Reading data...
19:50:39:838 -> [UART, PM25] Data not available.
19:50:39:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:838 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:838 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:859 -> [UART, PM25] Reading data...
19:50:39:859 -> [UART, PM25] Data not available.
19:50:39:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:859 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:859 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:880 -> [UART, PM25] Reading data...
19:50:39:880 -> [UART, PM25] Data not available.
19:50:39:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:880 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:880 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:901 -> [UART, PM25] Reading data...
19:50:39:901 -> [UART, PM25] Data not available.
19:50:39:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:901 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:901 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:922 -> [UART, PM25] Reading data...
19:50:39:922 -> [UART, PM25] Data not available.
19:50:39:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:922 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:922 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:943 -> [UART, PM25] Reading data...
19:50:39:943 -> [UART, PM25] Data not available.
19:50:39:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:943 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:943 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:964 -> [UART, PM25] Reading data...
19:50:39:964 -> [UART, PM25] Data not available.
19:50:39:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:964 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:964 -> [UART, PM25] Uart available, resetting event queue..
19:50:39:985 -> [UART, PM25] Reading data...
19:50:39:985 -> [UART, PM25] Data not available.
19:50:39:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:39:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:39:985 -> [UART, PM25] Uart available, clearing write errors..
19:50:39:985 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:006 -> [UART, PM25] Reading data...
19:50:40:006 -> [UART, PM25] Data not available.
19:50:40:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:006 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:006 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:027 -> [UART, PM25] Reading data...
19:50:40:027 -> [UART, PM25] Data not available.
19:50:40:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:027 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:027 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:048 -> [UART, PM25] Reading data...
19:50:40:048 -> [UART, PM25] Data not available.
19:50:40:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:048 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:048 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:069 -> [UART, PM25] Reading data...
19:50:40:069 -> [UART, PM25] Data not available.
19:50:40:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:069 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:069 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:090 -> [UART, PM25] Reading data...
19:50:40:090 -> [UART, PM25] Data not available.
19:50:40:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:090 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:090 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:111 -> [UART, PM25] Reading data...
19:50:40:112 -> [UART, PM25] Data not available.
19:50:40:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:112 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:112 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:132 -> [UART, PM25] Reading data...
19:50:40:132 -> [UART, PM25] Data not available.
19:50:40:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:132 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:132 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:153 -> [UART, PM25] Reading data...
19:50:40:153 -> [UART, PM25] Data not available.
19:50:40:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:153 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:153 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:174 -> [UART, PM25] Reading data...
19:50:40:174 -> [UART, PM25] Data not available.
19:50:40:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:174 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:174 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:195 -> [UART, PM25] Reading data...
19:50:40:195 -> [UART, PM25] Data not available.
19:50:40:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:195 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:195 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:216 -> [UART, PM25] Reading data...
19:50:40:216 -> [UART, PM25] Data not available.
19:50:40:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:216 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:216 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:237 -> [UART, PM25] Reading data...
19:50:40:237 -> [UART, PM25] Data not available.
19:50:40:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:237 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:237 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:264 -> [UART, PM25] Reading data...
19:50:40:264 -> [UART, PM25] Data not available.
19:50:40:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:264 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:264 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:279 -> [UART, PM25] Reading data...
19:50:40:279 -> [UART, PM25] Data not available.
19:50:40:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:279 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:279 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:300 -> [UART, PM25] Reading data...
19:50:40:300 -> [UART, PM25] Data not available.
19:50:40:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:300 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:300 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:341 -> [UART, PM25] Reading data...
19:50:40:355 -> [UART, PM25] Data not available.
19:50:40:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:355 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:355 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:355 -> [UART, PM25] Reading data...
19:50:40:355 -> [UART, PM25] Data not available.
19:50:40:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:355 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:355 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:363 -> [UART, PM25] Reading data...
19:50:40:363 -> [UART, PM25] Data not available.
19:50:40:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:363 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:363 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:384 -> [UART, PM25] Reading data...
19:50:40:384 -> [UART, PM25] Data not available.
19:50:40:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:384 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:384 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:405 -> [UART, PM25] Reading data...
19:50:40:405 -> [UART, PM25] Data not available.
19:50:40:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:405 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:405 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:426 -> [UART, PM25] Reading data...
19:50:40:426 -> [UART, PM25] Data not available.
19:50:40:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:426 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:426 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:447 -> [UART, PM25] Reading data...
19:50:40:447 -> [UART, PM25] Data not available.
19:50:40:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:447 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:447 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:468 -> [UART, PM25] Reading data...
19:50:40:468 -> [UART, PM25] Data not available.
19:50:40:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:468 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:468 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:489 -> [UART, PM25] Reading data...
19:50:40:489 -> [UART, PM25] Data not available.
19:50:40:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:489 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:489 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:510 -> [UART, PM25] Reading data...
19:50:40:510 -> [UART, PM25] Data not available.
19:50:40:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:510 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:510 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:531 -> [UART, PM25] Reading data...
19:50:40:531 -> [UART, PM25] Data not available.
19:50:40:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:531 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:531 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:552 -> [UART, PM25] Reading data...
19:50:40:552 -> [UART, PM25] Data not available.
19:50:40:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:552 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:552 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:573 -> [UART, PM25] Reading data...
19:50:40:573 -> [UART, PM25] Data not available.
19:50:40:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:573 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:573 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:594 -> [UART, PM25] Reading data...
19:50:40:594 -> [UART, PM25] Data not available.
19:50:40:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:594 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:594 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:615 -> [UART, PM25] Reading data...
19:50:40:615 -> [UART, PM25] Data not available.
19:50:40:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:615 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:615 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:636 -> [UART, PM25] Reading data...
19:50:40:637 -> [UART, PM25] Data not available.
19:50:40:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:657 -> [UART, PM25] Reading data...
19:50:40:657 -> [UART, PM25] Data not available.
19:50:40:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:657 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:657 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:678 -> [UART, PM25] Reading data...
19:50:40:678 -> [UART, PM25] Data not available.
19:50:40:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:678 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:678 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:699 -> [UART, PM25] Reading data...
19:50:40:699 -> [UART, PM25] Data not available.
19:50:40:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:699 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:699 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:720 -> [UART, PM25] Reading data...
19:50:40:720 -> [UART, PM25] Data not available.
19:50:40:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:720 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:720 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:741 -> [UART, PM25] Reading data...
19:50:40:742 -> [UART, PM25] Data not available.
19:50:40:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:742 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:742 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:762 -> [UART, PM25] Reading data...
19:50:40:762 -> [UART, PM25] Data not available.
19:50:40:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:762 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:762 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:786 -> [UART, PM25] Reading data...
19:50:40:787 -> [UART, PM25] Data not available.
19:50:40:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:787 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:787 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:804 -> [UART, PM25] Reading data...
19:50:40:804 -> [UART, PM25] Data not available.
19:50:40:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:804 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:804 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:825 -> [UART, PM25] Reading data...
19:50:40:825 -> [UART, PM25] Data not available.
19:50:40:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:825 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:825 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:846 -> [UART, PM25] Reading data...
19:50:40:846 -> [UART, PM25] Data not available.
19:50:40:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:846 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:846 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:867 -> [UART, PM25] Reading data...
19:50:40:867 -> [UART, PM25] Data not available.
19:50:40:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:867 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:867 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:888 -> [UART, PM25] Reading data...
19:50:40:888 -> [UART, PM25] Data not available.
19:50:40:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:888 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:888 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:909 -> [UART, PM25] Reading data...
19:50:40:909 -> [UART, PM25] Data not available.
19:50:40:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:909 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:909 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:930 -> [UART, PM25] Reading data...
19:50:40:930 -> [UART, PM25] Data not available.
19:50:40:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:930 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:930 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:951 -> [UART, PM25] Reading data...
19:50:40:951 -> [UART, PM25] Data not available.
19:50:40:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:951 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:951 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:972 -> [UART, PM25] Reading data...
19:50:40:972 -> [UART, PM25] Data not available.
19:50:40:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:972 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:972 -> [UART, PM25] Uart available, resetting event queue..
19:50:40:993 -> [UART, PM25] Reading data...
19:50:40:993 -> [UART, PM25] Data not available.
19:50:40:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:40:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:40:993 -> [UART, PM25] Uart available, clearing write errors..
19:50:40:993 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:014 -> [UART, PM25] Reading data...
19:50:41:014 -> [UART, PM25] Data not available.
19:50:41:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:014 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:014 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:035 -> [UART, PM25] Reading data...
19:50:41:035 -> [UART, PM25] Data not available.
19:50:41:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:035 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:035 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:056 -> [UART, PM25] Reading data...
19:50:41:056 -> [UART, PM25] Data not available.
19:50:41:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:056 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:056 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:077 -> [UART, PM25] Reading data...
19:50:41:077 -> [UART, PM25] Data not available.
19:50:41:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:077 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:077 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:098 -> [UART, PM25] Reading data...
19:50:41:098 -> [UART, PM25] Data not available.
19:50:41:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:098 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:098 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:119 -> [UART, PM25] Reading data...
19:50:41:119 -> [UART, PM25] Data not available.
19:50:41:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:119 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:119 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:140 -> [UART, PM25] Reading data...
19:50:41:140 -> [UART, PM25] Data not available.
19:50:41:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:140 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:140 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:160 -> [UART, PM25] Reading data...
19:50:41:161 -> [UART, PM25] Data not available.
19:50:41:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:161 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:161 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:182 -> [UART, PM25] Reading data...
19:50:41:183 -> [UART, PM25] Data not available.
19:50:41:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:183 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:183 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:203 -> [UART, PM25] Reading data...
19:50:41:203 -> [UART, PM25] Data not available.
19:50:41:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:203 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:203 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:224 -> [UART, PM25] Reading data...
19:50:41:224 -> [UART, PM25] Data not available.
19:50:41:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:224 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:224 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:245 -> [UART, PM25] Reading data...
19:50:41:245 -> [UART, PM25] Data not available.
19:50:41:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:245 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:245 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:266 -> [UART, PM25] Reading data...
19:50:41:266 -> [UART, PM25] Data not available.
19:50:41:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:266 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:266 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:297 -> [UART, PM25] Reading data...
19:50:41:298 -> [UART, PM25] Data not available.
19:50:41:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:298 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:298 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:308 -> [UART, PM25] Reading data...
19:50:41:308 -> [UART, PM25] Data not available.
19:50:41:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:308 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:308 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:329 -> [UART, PM25] Reading data...
19:50:41:329 -> [UART, PM25] Data not available.
19:50:41:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:329 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:329 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:350 -> [UART, PM25] Reading data...
19:50:41:350 -> [UART, PM25] Data not available.
19:50:41:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:350 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:350 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:371 -> [UART, PM25] Reading data...
19:50:41:371 -> [UART, PM25] Data not available.
19:50:41:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:371 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:371 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:391 -> [UART, PM25] Reading data...
19:50:41:392 -> [UART, PM25] Data not available.
19:50:41:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:392 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:392 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:412 -> [UART, PM25] Reading data...
19:50:41:413 -> [UART, PM25] Data not available.
19:50:41:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:413 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:413 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:434 -> [UART, PM25] Reading data...
19:50:41:434 -> [UART, PM25] Data not available.
19:50:41:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:434 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:434 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:455 -> [UART, PM25] Reading data...
19:50:41:455 -> [UART, PM25] Data not available.
19:50:41:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:455 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:455 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:455 -> PING!
19:50:41:669 -> [UART, PM25] Reading data...
19:50:41:669 -> [UART, PM25] Data not available.
19:50:41:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:669 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:669 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:690 -> [UART, PM25] Reading data...
19:50:41:690 -> [UART, PM25] Data not available.
19:50:41:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:690 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:690 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:711 -> [UART, PM25] Reading data...
19:50:41:711 -> [UART, PM25] Data not available.
19:50:41:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:711 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:711 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:732 -> [UART, PM25] Reading data...
19:50:41:732 -> [UART, PM25] Data not available.
19:50:41:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:732 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:732 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:753 -> [UART, PM25] Reading data...
19:50:41:753 -> [UART, PM25] Data not available.
19:50:41:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:753 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:753 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:774 -> [UART, PM25] Reading data...
19:50:41:774 -> [UART, PM25] Data not available.
19:50:41:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:774 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:774 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:795 -> [UART, PM25] Reading data...
19:50:41:796 -> [UART, PM25] Data not available.
19:50:41:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:796 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:796 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:824 -> [UART, PM25] Reading data...
19:50:41:825 -> [UART, PM25] Data not available.
19:50:41:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:825 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:825 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:837 -> [UART, PM25] Reading data...
19:50:41:837 -> [UART, PM25] Data not available.
19:50:41:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:837 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:837 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:858 -> [UART, PM25] Reading data...
19:50:41:858 -> [UART, PM25] Data not available.
19:50:41:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:858 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:858 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:879 -> [UART, PM25] Reading data...
19:50:41:879 -> [UART, PM25] Data not available.
19:50:41:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:879 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:879 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:900 -> [UART, PM25] Reading data...
19:50:41:900 -> [UART, PM25] Data not available.
19:50:41:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:900 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:900 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:921 -> [UART, PM25] Reading data...
19:50:41:921 -> [UART, PM25] Data not available.
19:50:41:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:921 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:921 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:942 -> [UART, PM25] Reading data...
19:50:41:942 -> [UART, PM25] Data not available.
19:50:41:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:942 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:942 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:963 -> [UART, PM25] Reading data...
19:50:41:963 -> [UART, PM25] Data not available.
19:50:41:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:963 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:963 -> [UART, PM25] Uart available, resetting event queue..
19:50:41:984 -> [UART, PM25] Reading data...
19:50:41:984 -> [UART, PM25] Data not available.
19:50:41:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:41:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:41:984 -> [UART, PM25] Uart available, clearing write errors..
19:50:41:984 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:004 -> [UART, PM25] Reading data...
19:50:42:005 -> [UART, PM25] Data not available.
19:50:42:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:005 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:005 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:026 -> [UART, PM25] Reading data...
19:50:42:026 -> [UART, PM25] Data not available.
19:50:42:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:026 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:026 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:047 -> [UART, PM25] Reading data...
19:50:42:048 -> [UART, PM25] Data not available.
19:50:42:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:048 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:048 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:068 -> [UART, PM25] Reading data...
19:50:42:068 -> [UART, PM25] Data not available.
19:50:42:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:068 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:068 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:089 -> [UART, PM25] Reading data...
19:50:42:089 -> [UART, PM25] Data not available.
19:50:42:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:089 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:089 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:110 -> [UART, PM25] Reading data...
19:50:42:110 -> [UART, PM25] Data not available.
19:50:42:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:110 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:110 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:131 -> [UART, PM25] Reading data...
19:50:42:131 -> [UART, PM25] Data not available.
19:50:42:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:131 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:131 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:152 -> [UART, PM25] Reading data...
19:50:42:152 -> [UART, PM25] Data not available.
19:50:42:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:152 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:152 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:173 -> [UART, PM25] Reading data...
19:50:42:173 -> [UART, PM25] Data not available.
19:50:42:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:173 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:173 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:193 -> [UART, PM25] Reading data...
19:50:42:194 -> [UART, PM25] Data not available.
19:50:42:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:194 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:194 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:232 -> [UART, PM25] Reading data...
19:50:42:242 -> [UART, PM25] Data not available.
19:50:42:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:242 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:242 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:242 -> [UART, PM25] Reading data...
19:50:42:242 -> [UART, PM25] Data not available.
19:50:42:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:242 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:242 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:257 -> [UART, PM25] Reading data...
19:50:42:257 -> [UART, PM25] Data not available.
19:50:42:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:257 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:257 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:278 -> [UART, PM25] Reading data...
19:50:42:278 -> [UART, PM25] Data not available.
19:50:42:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:278 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:278 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:298 -> [UART, PM25] Reading data...
19:50:42:299 -> [UART, PM25] Data not available.
19:50:42:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:299 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:299 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:320 -> [UART, PM25] Reading data...
19:50:42:320 -> [UART, PM25] Data not available.
19:50:42:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:320 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:320 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:340 -> [UART, PM25] Reading data...
19:50:42:341 -> [UART, PM25] Data not available.
19:50:42:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:341 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:341 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:362 -> [UART, PM25] Reading data...
19:50:42:362 -> [UART, PM25] Data not available.
19:50:42:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:362 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:362 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:382 -> [UART, PM25] Reading data...
19:50:42:383 -> [UART, PM25] Data not available.
19:50:42:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:383 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:383 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:404 -> [UART, PM25] Reading data...
19:50:42:404 -> [UART, PM25] Data not available.
19:50:42:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:404 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:404 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:425 -> [UART, PM25] Reading data...
19:50:42:425 -> [UART, PM25] Data not available.
19:50:42:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:425 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:425 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:446 -> [UART, PM25] Reading data...
19:50:42:446 -> [UART, PM25] Data not available.
19:50:42:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:446 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:446 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:467 -> [UART, PM25] Reading data...
19:50:42:467 -> [UART, PM25] Data not available.
19:50:42:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:467 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:467 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:488 -> [UART, PM25] Reading data...
19:50:42:488 -> [UART, PM25] Data not available.
19:50:42:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:488 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:488 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:509 -> [UART, PM25] Reading data...
19:50:42:509 -> [UART, PM25] Data not available.
19:50:42:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:509 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:509 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:530 -> [UART, PM25] Reading data...
19:50:42:530 -> [UART, PM25] Data not available.
19:50:42:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:530 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:530 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:551 -> [UART, PM25] Reading data...
19:50:42:551 -> [UART, PM25] Data not available.
19:50:42:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:551 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:551 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:572 -> [UART, PM25] Reading data...
19:50:42:572 -> [UART, PM25] Data not available.
19:50:42:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:572 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:572 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:593 -> [UART, PM25] Reading data...
19:50:42:593 -> [UART, PM25] Data not available.
19:50:42:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:593 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:593 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:614 -> [UART, PM25] Reading data...
19:50:42:614 -> [UART, PM25] Data not available.
19:50:42:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:614 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:614 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:635 -> [UART, PM25] Reading data...
19:50:42:635 -> [UART, PM25] Data not available.
19:50:42:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:635 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:635 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:656 -> [UART, PM25] Reading data...
19:50:42:656 -> [UART, PM25] Data not available.
19:50:42:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:656 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:656 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:677 -> [UART, PM25] Reading data...
19:50:42:677 -> [UART, PM25] Data not available.
19:50:42:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:677 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:677 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:698 -> [UART, PM25] Reading data...
19:50:42:698 -> [UART, PM25] Data not available.
19:50:42:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:698 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:698 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:719 -> [UART, PM25] Reading data...
19:50:42:719 -> [UART, PM25] Data not available.
19:50:42:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:719 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:719 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:740 -> [UART, PM25] Reading data...
19:50:42:740 -> [UART, PM25] Data not available.
19:50:42:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:740 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:740 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:761 -> [UART, PM25] Reading data...
19:50:42:761 -> [UART, PM25] Data not available.
19:50:42:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:761 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:761 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:782 -> [UART, PM25] Reading data...
19:50:42:782 -> [UART, PM25] Data not available.
19:50:42:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:782 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:782 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:803 -> [UART, PM25] Reading data...
19:50:42:803 -> [UART, PM25] Data not available.
19:50:42:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:803 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:803 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:824 -> [UART, PM25] Reading data...
19:50:42:824 -> [UART, PM25] Data not available.
19:50:42:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:824 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:824 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:850 -> [UART, PM25] Reading data...
19:50:42:851 -> [UART, PM25] Data not available.
19:50:42:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:851 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:851 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:866 -> [UART, PM25] Reading data...
19:50:42:866 -> [UART, PM25] Data not available.
19:50:42:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:866 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:866 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:887 -> [UART, PM25] Reading data...
19:50:42:887 -> [UART, PM25] Data not available.
19:50:42:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:887 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:887 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:908 -> [UART, PM25] Reading data...
19:50:42:908 -> [UART, PM25] Data not available.
19:50:42:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:908 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:908 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:929 -> [UART, PM25] Reading data...
19:50:42:929 -> [UART, PM25] Data not available.
19:50:42:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:929 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:929 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:950 -> [UART, PM25] Reading data...
19:50:42:950 -> [UART, PM25] Data not available.
19:50:42:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:950 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:950 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:971 -> [UART, PM25] Reading data...
19:50:42:971 -> [UART, PM25] Data not available.
19:50:42:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:971 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:971 -> [UART, PM25] Uart available, resetting event queue..
19:50:42:992 -> [UART, PM25] Reading data...
19:50:42:992 -> [UART, PM25] Data not available.
19:50:42:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:42:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:42:992 -> [UART, PM25] Uart available, clearing write errors..
19:50:42:992 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:013 -> [UART, PM25] Reading data...
19:50:43:013 -> [UART, PM25] Data not available.
19:50:43:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:013 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:013 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:033 -> [UART, PM25] Reading data...
19:50:43:034 -> [UART, PM25] Data not available.
19:50:43:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:034 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:034 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:055 -> [UART, PM25] Reading data...
19:50:43:055 -> [UART, PM25] Data not available.
19:50:43:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:055 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:055 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:076 -> [UART, PM25] Reading data...
19:50:43:076 -> [UART, PM25] Data not available.
19:50:43:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:076 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:076 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:097 -> [UART, PM25] Reading data...
19:50:43:097 -> [UART, PM25] Data not available.
19:50:43:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:097 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:097 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:118 -> [UART, PM25] Reading data...
19:50:43:118 -> [UART, PM25] Data not available.
19:50:43:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:118 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:118 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:139 -> [UART, PM25] Reading data...
19:50:43:139 -> [UART, PM25] Data not available.
19:50:43:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:139 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:139 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:160 -> [UART, PM25] Reading data...
19:50:43:160 -> [UART, PM25] Data not available.
19:50:43:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:160 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:160 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:181 -> [UART, PM25] Reading data...
19:50:43:181 -> [UART, PM25] Data not available.
19:50:43:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:181 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:181 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:202 -> [UART, PM25] Reading data...
19:50:43:202 -> [UART, PM25] Data not available.
19:50:43:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:223 -> [UART, PM25] Reading data...
19:50:43:223 -> [UART, PM25] Data not available.
19:50:43:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:244 -> [UART, PM25] Reading data...
19:50:43:244 -> [UART, PM25] Data not available.
19:50:43:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:244 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:244 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:264 -> [UART, PM25] Reading data...
19:50:43:265 -> [UART, PM25] Data not available.
19:50:43:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:265 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:265 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:286 -> [UART, PM25] Reading data...
19:50:43:286 -> [UART, PM25] Data not available.
19:50:43:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:286 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:286 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:309 -> [UART, PM25] Reading data...
19:50:43:311 -> [UART, PM25] Data not available.
19:50:43:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:311 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:311 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:328 -> [UART, PM25] Reading data...
19:50:43:328 -> [UART, PM25] Data not available.
19:50:43:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:328 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:328 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:349 -> [UART, PM25] Reading data...
19:50:43:349 -> [UART, PM25] Data not available.
19:50:43:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:349 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:349 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:370 -> [UART, PM25] Reading data...
19:50:43:370 -> [UART, PM25] Data not available.
19:50:43:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:370 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:370 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:391 -> [UART, PM25] Reading data...
19:50:43:391 -> [UART, PM25] Data not available.
19:50:43:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:391 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:391 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:412 -> [UART, PM25] Reading data...
19:50:43:412 -> [UART, PM25] Data not available.
19:50:43:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:412 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:412 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:433 -> [UART, PM25] Reading data...
19:50:43:433 -> [UART, PM25] Data not available.
19:50:43:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:433 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:433 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:454 -> [UART, PM25] Reading data...
19:50:43:454 -> [UART, PM25] Data not available.
19:50:43:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:454 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:454 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:475 -> [UART, PM25] Reading data...
19:50:43:475 -> [UART, PM25] Data not available.
19:50:43:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:475 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:475 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:496 -> [UART, PM25] Reading data...
19:50:43:496 -> [UART, PM25] Data not available.
19:50:43:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:517 -> [UART, PM25] Reading data...
19:50:43:517 -> [UART, PM25] Data not available.
19:50:43:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:517 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:517 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:538 -> [UART, PM25] Reading data...
19:50:43:538 -> [UART, PM25] Data not available.
19:50:43:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:538 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:538 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:559 -> [UART, PM25] Reading data...
19:50:43:559 -> [UART, PM25] Data not available.
19:50:43:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:559 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:559 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:580 -> [UART, PM25] Reading data...
19:50:43:580 -> [UART, PM25] Data not available.
19:50:43:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:580 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:580 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:601 -> [UART, PM25] Reading data...
19:50:43:601 -> [UART, PM25] Data not available.
19:50:43:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:622 -> [UART, PM25] Reading data...
19:50:43:622 -> [UART, PM25] Data not available.
19:50:43:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:622 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:622 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:643 -> [UART, PM25] Reading data...
19:50:43:643 -> [UART, PM25] Data not available.
19:50:43:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:643 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:643 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:664 -> [UART, PM25] Reading data...
19:50:43:664 -> [UART, PM25] Data not available.
19:50:43:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:664 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:664 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:685 -> [UART, PM25] Reading data...
19:50:43:685 -> [UART, PM25] Data not available.
19:50:43:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:706 -> [UART, PM25] Reading data...
19:50:43:706 -> [UART, PM25] Data not available.
19:50:43:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:706 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:706 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:726 -> [UART, PM25] Reading data...
19:50:43:727 -> [UART, PM25] Data not available.
19:50:43:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:727 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:727 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:748 -> [UART, PM25] Reading data...
19:50:43:748 -> [UART, PM25] Data not available.
19:50:43:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:748 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:748 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:769 -> [UART, PM25] Reading data...
19:50:43:769 -> [UART, PM25] Data not available.
19:50:43:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:769 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:769 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:790 -> [UART, PM25] Reading data...
19:50:43:790 -> [UART, PM25] Data not available.
19:50:43:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:790 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:790 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:811 -> [UART, PM25] Reading data...
19:50:43:811 -> [UART, PM25] Data not available.
19:50:43:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:811 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:811 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:832 -> [UART, PM25] Reading data...
19:50:43:834 -> [UART, PM25] Data not available.
19:50:43:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:834 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:834 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:853 -> [UART, PM25] Reading data...
19:50:43:853 -> [UART, PM25] Data not available.
19:50:43:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:853 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:853 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:881 -> [UART, PM25] Reading data...
19:50:43:924 -> [UART, PM25] Data not available.
19:50:43:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:924 -> [UART, PM25] Reading data...
19:50:43:924 -> [UART, PM25] Data not available.
19:50:43:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:924 -> [UART, PM25] Reading data...
19:50:43:924 -> [UART, PM25] Data not available.
19:50:43:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:936 -> [UART, PM25] Reading data...
19:50:43:937 -> [UART, PM25] Data not available.
19:50:43:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:937 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:937 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:958 -> [UART, PM25] Reading data...
19:50:43:958 -> [UART, PM25] Data not available.
19:50:43:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:958 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:958 -> [UART, PM25] Uart available, resetting event queue..
19:50:43:979 -> [UART, PM25] Reading data...
19:50:43:979 -> [UART, PM25] Data not available.
19:50:43:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:43:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:43:979 -> [UART, PM25] Uart available, clearing write errors..
19:50:43:979 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:000 -> [UART, PM25] Reading data...
19:50:44:000 -> [UART, PM25] Data not available.
19:50:44:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:000 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:000 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:021 -> [UART, PM25] Reading data...
19:50:44:021 -> [UART, PM25] Data not available.
19:50:44:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:021 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:021 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:042 -> [UART, PM25] Reading data...
19:50:44:042 -> [UART, PM25] Data not available.
19:50:44:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:042 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:042 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:062 -> [UART, PM25] Reading data...
19:50:44:063 -> [UART, PM25] Data not available.
19:50:44:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:063 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:063 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:084 -> [UART, PM25] Reading data...
19:50:44:085 -> [UART, PM25] Data not available.
19:50:44:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:085 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:085 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:105 -> [UART, PM25] Reading data...
19:50:44:105 -> [UART, PM25] Data not available.
19:50:44:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:105 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:105 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:126 -> [UART, PM25] Reading data...
19:50:44:126 -> [UART, PM25] Data not available.
19:50:44:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:126 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:126 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:147 -> [UART, PM25] Reading data...
19:50:44:147 -> [UART, PM25] Data not available.
19:50:44:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:147 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:147 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:168 -> [UART, PM25] Reading data...
19:50:44:168 -> [UART, PM25] Data not available.
19:50:44:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:168 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:168 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:189 -> [UART, PM25] Reading data...
19:50:44:189 -> [UART, PM25] Data not available.
19:50:44:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:189 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:189 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:210 -> [UART, PM25] Reading data...
19:50:44:210 -> [UART, PM25] Data not available.
19:50:44:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:210 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:210 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:231 -> [UART, PM25] Reading data...
19:50:44:231 -> [UART, PM25] Data not available.
19:50:44:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:231 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:231 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:252 -> [UART, PM25] Reading data...
19:50:44:252 -> [UART, PM25] Data not available.
19:50:44:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:273 -> [UART, PM25] Reading data...
19:50:44:273 -> [UART, PM25] Data not available.
19:50:44:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:294 -> [UART, PM25] Reading data...
19:50:44:294 -> [UART, PM25] Data not available.
19:50:44:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:315 -> [UART, PM25] Reading data...
19:50:44:315 -> [UART, PM25] Data not available.
19:50:44:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:315 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:315 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:336 -> [UART, PM25] Reading data...
19:50:44:336 -> [UART, PM25] Data not available.
19:50:44:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:336 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:336 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:357 -> [UART, PM25] Reading data...
19:50:44:357 -> [UART, PM25] Data not available.
19:50:44:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:357 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:357 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:378 -> [UART, PM25] Reading data...
19:50:44:378 -> [UART, PM25] Data not available.
19:50:44:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:378 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:378 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:400 -> [UART, PM25] Reading data...
19:50:44:400 -> [UART, PM25] Data not available.
19:50:44:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:400 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:400 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:424 -> [UART, PM25] Reading data...
19:50:44:424 -> [UART, PM25] Data not available.
19:50:44:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:424 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:424 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:441 -> [UART, PM25] Reading data...
19:50:44:441 -> [UART, PM25] Data not available.
19:50:44:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:441 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:441 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:462 -> [UART, PM25] Reading data...
19:50:44:462 -> [UART, PM25] Data not available.
19:50:44:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:482 -> [UART, PM25] Reading data...
19:50:44:483 -> [UART, PM25] Data not available.
19:50:44:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:483 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:483 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:504 -> [UART, PM25] Reading data...
19:50:44:504 -> [UART, PM25] Data not available.
19:50:44:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:504 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:504 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:525 -> [UART, PM25] Reading data...
19:50:44:525 -> [UART, PM25] Data not available.
19:50:44:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:545 -> [UART, PM25] Reading data...
19:50:44:546 -> [UART, PM25] Data not available.
19:50:44:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:567 -> [UART, PM25] Reading data...
19:50:44:567 -> [UART, PM25] Data not available.
19:50:44:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:567 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:567 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:588 -> [UART, PM25] Reading data...
19:50:44:588 -> [UART, PM25] Data not available.
19:50:44:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:588 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:588 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:609 -> [UART, PM25] Reading data...
19:50:44:609 -> [UART, PM25] Data not available.
19:50:44:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:630 -> [UART, PM25] Reading data...
19:50:44:630 -> [UART, PM25] Data not available.
19:50:44:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:651 -> [UART, PM25] Reading data...
19:50:44:651 -> [UART, PM25] Data not available.
19:50:44:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:651 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:651 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:671 -> [UART, PM25] Reading data...
19:50:44:672 -> [UART, PM25] Data not available.
19:50:44:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:672 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:672 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:693 -> [UART, PM25] Reading data...
19:50:44:693 -> [UART, PM25] Data not available.
19:50:44:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:693 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:693 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:714 -> [UART, PM25] Reading data...
19:50:44:714 -> [UART, PM25] Data not available.
19:50:44:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:714 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:714 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:735 -> [UART, PM25] Reading data...
19:50:44:735 -> [UART, PM25] Data not available.
19:50:44:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:756 -> [UART, PM25] Reading data...
19:50:44:756 -> [UART, PM25] Data not available.
19:50:44:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:756 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:756 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:777 -> [UART, PM25] Reading data...
19:50:44:777 -> [UART, PM25] Data not available.
19:50:44:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:798 -> [UART, PM25] Reading data...
19:50:44:798 -> [UART, PM25] Data not available.
19:50:44:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:819 -> [UART, PM25] Reading data...
19:50:44:819 -> [UART, PM25] Data not available.
19:50:44:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:840 -> [UART, PM25] Reading data...
19:50:44:840 -> [UART, PM25] Data not available.
19:50:44:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:840 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:840 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:865 -> [UART, PM25] Reading data...
19:50:44:866 -> [UART, PM25] Data not available.
19:50:44:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:866 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:866 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:882 -> [UART, PM25] Reading data...
19:50:44:882 -> [UART, PM25] Data not available.
19:50:44:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:882 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:882 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:915 -> [UART, PM25] Reading data...
19:50:44:916 -> [UART, PM25] Data not available.
19:50:44:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:916 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:916 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:924 -> [UART, PM25] Reading data...
19:50:44:924 -> [UART, PM25] Data not available.
19:50:44:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:924 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:924 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:945 -> [UART, PM25] Reading data...
19:50:44:945 -> [UART, PM25] Data not available.
19:50:44:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:945 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:945 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:965 -> [UART, PM25] Reading data...
19:50:44:966 -> [UART, PM25] Data not available.
19:50:44:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:44:987 -> [UART, PM25] Reading data...
19:50:44:987 -> [UART, PM25] Data not available.
19:50:44:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:44:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:44:987 -> [UART, PM25] Uart available, clearing write errors..
19:50:44:987 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:008 -> [UART, PM25] Reading data...
19:50:45:008 -> [UART, PM25] Data not available.
19:50:45:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:008 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:008 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:029 -> [UART, PM25] Reading data...
19:50:45:029 -> [UART, PM25] Data not available.
19:50:45:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:029 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:029 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:050 -> [UART, PM25] Reading data...
19:50:45:050 -> [UART, PM25] Data not available.
19:50:45:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:050 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:050 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:071 -> [UART, PM25] Reading data...
19:50:45:071 -> [UART, PM25] Data not available.
19:50:45:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:071 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:071 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:092 -> [UART, PM25] Reading data...
19:50:45:092 -> [UART, PM25] Data not available.
19:50:45:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:092 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:092 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:113 -> [UART, PM25] Reading data...
19:50:45:114 -> [UART, PM25] Data not available.
19:50:45:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:114 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:114 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:134 -> [UART, PM25] Reading data...
19:50:45:134 -> [UART, PM25] Data not available.
19:50:45:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:135 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:135 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:155 -> [UART, PM25] Reading data...
19:50:45:155 -> [UART, PM25] Data not available.
19:50:45:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:155 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:155 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:176 -> [UART, PM25] Reading data...
19:50:45:176 -> [UART, PM25] Data not available.
19:50:45:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:176 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:176 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:197 -> [UART, PM25] Reading data...
19:50:45:197 -> [UART, PM25] Data not available.
19:50:45:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:197 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:197 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:217 -> [UART, PM25] Reading data...
19:50:45:218 -> [UART, PM25] Data not available.
19:50:45:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:218 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:218 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:239 -> [UART, PM25] Reading data...
19:50:45:239 -> [UART, PM25] Data not available.
19:50:45:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:239 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:239 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:260 -> [UART, PM25] Reading data...
19:50:45:260 -> [UART, PM25] Data not available.
19:50:45:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:260 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:260 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:280 -> [UART, PM25] Reading data...
19:50:45:281 -> [UART, PM25] Data not available.
19:50:45:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:281 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:281 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:302 -> [UART, PM25] Reading data...
19:50:45:302 -> [UART, PM25] Data not available.
19:50:45:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:323 -> [UART, PM25] Reading data...
19:50:45:323 -> [UART, PM25] Data not available.
19:50:45:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:323 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:323 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:344 -> [UART, PM25] Reading data...
19:50:45:344 -> [UART, PM25] Data not available.
19:50:45:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:344 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:344 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:365 -> [UART, PM25] Reading data...
19:50:45:365 -> [UART, PM25] Data not available.
19:50:45:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:365 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:365 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:385 -> [UART, PM25] Reading data...
19:50:45:386 -> [UART, PM25] Data not available.
19:50:45:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:386 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:386 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:407 -> [UART, PM25] Reading data...
19:50:45:408 -> [UART, PM25] Data not available.
19:50:45:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:408 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:408 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:428 -> [UART, PM25] Reading data...
19:50:45:428 -> [UART, PM25] Data not available.
19:50:45:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:428 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:428 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:449 -> [UART, PM25] Reading data...
19:50:45:449 -> [UART, PM25] Data not available.
19:50:45:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:449 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:449 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:470 -> [UART, PM25] Reading data...
19:50:45:470 -> [UART, PM25] Data not available.
19:50:45:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:470 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:470 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:490 -> [UART, PM25] Reading data...
19:50:45:495 -> [UART, PM25] Data not available.
19:50:45:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:511 -> [UART, PM25] Reading data...
19:50:45:512 -> [UART, PM25] Data not available.
19:50:45:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:512 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:512 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:533 -> [UART, PM25] Reading data...
19:50:45:533 -> [UART, PM25] Data not available.
19:50:45:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:533 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:533 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:554 -> [UART, PM25] Reading data...
19:50:45:554 -> [UART, PM25] Data not available.
19:50:45:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:554 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:554 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:590 -> [UART, PM25] Reading data...
19:50:45:603 -> [UART, PM25] Data not available.
19:50:45:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:603 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:603 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:603 -> [UART, PM25] Reading data...
19:50:45:603 -> [UART, PM25] Data not available.
19:50:45:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:603 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:603 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:616 -> [UART, PM25] Reading data...
19:50:45:617 -> [UART, PM25] Data not available.
19:50:45:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:638 -> [UART, PM25] Reading data...
19:50:45:638 -> [UART, PM25] Data not available.
19:50:45:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:638 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:638 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:658 -> [UART, PM25] Reading data...
19:50:45:659 -> [UART, PM25] Data not available.
19:50:45:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:659 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:659 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:680 -> [UART, PM25] Reading data...
19:50:45:680 -> [UART, PM25] Data not available.
19:50:45:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:680 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:680 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:700 -> [UART, PM25] Reading data...
19:50:45:701 -> [UART, PM25] Data not available.
19:50:45:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:701 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:701 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:722 -> [UART, PM25] Reading data...
19:50:45:722 -> [UART, PM25] Data not available.
19:50:45:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:722 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:722 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:743 -> [UART, PM25] Reading data...
19:50:45:743 -> [UART, PM25] Data not available.
19:50:45:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:743 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:743 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:764 -> [UART, PM25] Reading data...
19:50:45:764 -> [UART, PM25] Data not available.
19:50:45:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:764 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:764 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:785 -> [UART, PM25] Reading data...
19:50:45:785 -> [UART, PM25] Data not available.
19:50:45:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:785 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:785 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:805 -> [UART, PM25] Reading data...
19:50:45:806 -> [UART, PM25] Data not available.
19:50:45:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:827 -> [UART, PM25] Reading data...
19:50:45:827 -> [UART, PM25] Data not available.
19:50:45:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:827 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:827 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:849 -> [UART, PM25] Reading data...
19:50:45:851 -> [UART, PM25] Data not available.
19:50:45:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:851 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:851 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:869 -> [UART, PM25] Reading data...
19:50:45:869 -> [UART, PM25] Data not available.
19:50:45:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:869 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:869 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:890 -> [UART, PM25] Reading data...
19:50:45:890 -> [UART, PM25] Data not available.
19:50:45:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:890 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:890 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:911 -> [UART, PM25] Reading data...
19:50:45:911 -> [UART, PM25] Data not available.
19:50:45:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:911 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:911 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:938 -> [UART, PM25] Reading data...
19:50:45:939 -> [UART, PM25] Data not available.
19:50:45:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:939 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:939 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:953 -> [UART, PM25] Reading data...
19:50:45:953 -> [UART, PM25] Data not available.
19:50:45:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:953 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:953 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:974 -> [UART, PM25] Reading data...
19:50:45:974 -> [UART, PM25] Data not available.
19:50:45:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:974 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:974 -> [UART, PM25] Uart available, resetting event queue..
19:50:45:994 -> [UART, PM25] Reading data...
19:50:45:995 -> [UART, PM25] Data not available.
19:50:45:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:45:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:45:995 -> [UART, PM25] Uart available, clearing write errors..
19:50:45:995 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:016 -> [UART, PM25] Reading data...
19:50:46:016 -> [UART, PM25] Data not available.
19:50:46:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:016 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:016 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:037 -> [UART, PM25] Reading data...
19:50:46:037 -> [UART, PM25] Data not available.
19:50:46:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:037 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:037 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:058 -> [UART, PM25] Reading data...
19:50:46:058 -> [UART, PM25] Data not available.
19:50:46:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:058 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:058 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:079 -> [UART, PM25] Reading data...
19:50:46:079 -> [UART, PM25] Data not available.
19:50:46:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:079 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:079 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:100 -> [UART, PM25] Reading data...
19:50:46:100 -> [UART, PM25] Data not available.
19:50:46:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:100 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:100 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:121 -> [UART, PM25] Reading data...
19:50:46:121 -> [UART, PM25] Data not available.
19:50:46:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:121 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:121 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:142 -> [UART, PM25] Reading data...
19:50:46:142 -> [UART, PM25] Data not available.
19:50:46:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:163 -> [UART, PM25] Reading data...
19:50:46:163 -> [UART, PM25] Data not available.
19:50:46:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:163 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:163 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:164 -> PING!
19:50:46:377 -> [UART, PM25] Reading data...
19:50:46:377 -> [UART, PM25] Data not available.
19:50:46:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:377 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:377 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:398 -> [UART, PM25] Reading data...
19:50:46:398 -> [UART, PM25] Data not available.
19:50:46:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:398 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:398 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:419 -> [UART, PM25] Reading data...
19:50:46:419 -> [UART, PM25] Data not available.
19:50:46:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:419 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:419 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:450 -> [UART, PM25] Reading data...
19:50:46:451 -> [UART, PM25] Data not available.
19:50:46:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:451 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:451 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:461 -> [UART, PM25] Reading data...
19:50:46:461 -> [UART, PM25] Data not available.
19:50:46:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:461 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:461 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:481 -> [UART, PM25] Reading data...
19:50:46:482 -> [UART, PM25] Data not available.
19:50:46:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:482 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:482 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:503 -> [UART, PM25] Reading data...
19:50:46:503 -> [UART, PM25] Data not available.
19:50:46:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:503 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:503 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:524 -> [UART, PM25] Reading data...
19:50:46:524 -> [UART, PM25] Data not available.
19:50:46:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:524 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:524 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:545 -> [UART, PM25] Reading data...
19:50:46:545 -> [UART, PM25] Data not available.
19:50:46:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:545 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:545 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:566 -> [UART, PM25] Reading data...
19:50:46:566 -> [UART, PM25] Data not available.
19:50:46:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:566 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:566 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:587 -> [UART, PM25] Reading data...
19:50:46:587 -> [UART, PM25] Data not available.
19:50:46:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:587 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:587 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:608 -> [UART, PM25] Reading data...
19:50:46:608 -> [UART, PM25] Data not available.
19:50:46:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:608 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:608 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:629 -> [UART, PM25] Reading data...
19:50:46:630 -> [UART, PM25] Data not available.
19:50:46:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:650 -> [UART, PM25] Reading data...
19:50:46:650 -> [UART, PM25] Data not available.
19:50:46:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:650 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:650 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:671 -> [UART, PM25] Reading data...
19:50:46:671 -> [UART, PM25] Data not available.
19:50:46:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:671 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:671 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:692 -> [UART, PM25] Reading data...
19:50:46:692 -> [UART, PM25] Data not available.
19:50:46:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:692 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:692 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:713 -> [UART, PM25] Reading data...
19:50:46:713 -> [UART, PM25] Data not available.
19:50:46:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:713 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:713 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:734 -> [UART, PM25] Reading data...
19:50:46:734 -> [UART, PM25] Data not available.
19:50:46:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:734 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:734 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:755 -> [UART, PM25] Reading data...
19:50:46:755 -> [UART, PM25] Data not available.
19:50:46:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:755 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:755 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:776 -> [UART, PM25] Reading data...
19:50:46:776 -> [UART, PM25] Data not available.
19:50:46:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:776 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:776 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:797 -> [UART, PM25] Reading data...
19:50:46:797 -> [UART, PM25] Data not available.
19:50:46:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:797 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:797 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:818 -> [UART, PM25] Reading data...
19:50:46:818 -> [UART, PM25] Data not available.
19:50:46:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:818 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:818 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:839 -> [UART, PM25] Reading data...
19:50:46:839 -> [UART, PM25] Data not available.
19:50:46:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:839 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:839 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:860 -> [UART, PM25] Reading data...
19:50:46:860 -> [UART, PM25] Data not available.
19:50:46:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:860 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:860 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:881 -> [UART, PM25] Reading data...
19:50:46:881 -> [UART, PM25] Data not available.
19:50:46:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:881 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:881 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:902 -> [UART, PM25] Reading data...
19:50:46:902 -> [UART, PM25] Data not available.
19:50:46:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:902 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:902 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:923 -> [UART, PM25] Reading data...
19:50:46:923 -> [UART, PM25] Data not available.
19:50:46:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:923 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:923 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:944 -> [UART, PM25] Reading data...
19:50:46:944 -> [UART, PM25] Data not available.
19:50:46:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:944 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:944 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:965 -> [UART, PM25] Reading data...
19:50:46:966 -> [UART, PM25] Data not available.
19:50:46:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:46:986 -> [UART, PM25] Reading data...
19:50:46:986 -> [UART, PM25] Data not available.
19:50:46:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:46:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:46:987 -> [UART, PM25] Uart available, clearing write errors..
19:50:46:987 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:007 -> [UART, PM25] Reading data...
19:50:47:008 -> [UART, PM25] Data not available.
19:50:47:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:008 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:008 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:028 -> [UART, PM25] Reading data...
19:50:47:028 -> [UART, PM25] Data not available.
19:50:47:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:028 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:028 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:048 -> [UART, PM25] Reading data...
19:50:47:049 -> [UART, PM25] Data not available.
19:50:47:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:049 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:049 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:070 -> [UART, PM25] Reading data...
19:50:47:070 -> [UART, PM25] Data not available.
19:50:47:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:070 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:070 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:091 -> [UART, PM25] Reading data...
19:50:47:091 -> [UART, PM25] Data not available.
19:50:47:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:091 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:091 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:112 -> [UART, PM25] Reading data...
19:50:47:112 -> [UART, PM25] Data not available.
19:50:47:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:112 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:112 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:133 -> [UART, PM25] Reading data...
19:50:47:133 -> [UART, PM25] Data not available.
19:50:47:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:133 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:133 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:154 -> [UART, PM25] Reading data...
19:50:47:154 -> [UART, PM25] Data not available.
19:50:47:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:154 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:154 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:175 -> [UART, PM25] Reading data...
19:50:47:175 -> [UART, PM25] Data not available.
19:50:47:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:175 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:175 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:196 -> [UART, PM25] Reading data...
19:50:47:196 -> [UART, PM25] Data not available.
19:50:47:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:196 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:196 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:217 -> [UART, PM25] Reading data...
19:50:47:217 -> [UART, PM25] Data not available.
19:50:47:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:217 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:217 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:238 -> [UART, PM25] Reading data...
19:50:47:238 -> [UART, PM25] Data not available.
19:50:47:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:238 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:238 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:259 -> [UART, PM25] Reading data...
19:50:47:259 -> [UART, PM25] Data not available.
19:50:47:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:259 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:259 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:280 -> [UART, PM25] Reading data...
19:50:47:280 -> [UART, PM25] Data not available.
19:50:47:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:280 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:280 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:301 -> [UART, PM25] Reading data...
19:50:47:301 -> [UART, PM25] Data not available.
19:50:47:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:301 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:301 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:322 -> [UART, PM25] Reading data...
19:50:47:322 -> [UART, PM25] Data not available.
19:50:47:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:322 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:322 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:342 -> [UART, PM25] Reading data...
19:50:47:344 -> [UART, PM25] Data not available.
19:50:47:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:344 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:344 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:364 -> [UART, PM25] Reading data...
19:50:47:364 -> [UART, PM25] Data not available.
19:50:47:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:364 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:364 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:385 -> [UART, PM25] Reading data...
19:50:47:385 -> [UART, PM25] Data not available.
19:50:47:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:385 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:385 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:406 -> [UART, PM25] Reading data...
19:50:47:406 -> [UART, PM25] Data not available.
19:50:47:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:406 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:406 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:426 -> [UART, PM25] Reading data...
19:50:47:427 -> [UART, PM25] Data not available.
19:50:47:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:427 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:427 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:448 -> [UART, PM25] Reading data...
19:50:47:448 -> [UART, PM25] Data not available.
19:50:47:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:448 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:448 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:512 -> [UART, PM25] Reading data...
19:50:47:513 -> [UART, PM25] Data not available.
19:50:47:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:513 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:513 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:513 -> [UART, PM25] Reading data...
19:50:47:513 -> [UART, PM25] Data not available.
19:50:47:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:513 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:513 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:513 -> [UART, PM25] Reading data...
19:50:47:513 -> [UART, PM25] Data not available.
19:50:47:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:513 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:513 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:532 -> [UART, PM25] Reading data...
19:50:47:532 -> [UART, PM25] Data not available.
19:50:47:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:532 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:532 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:552 -> [UART, PM25] Reading data...
19:50:47:553 -> [UART, PM25] Data not available.
19:50:47:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:553 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:553 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:574 -> [UART, PM25] Reading data...
19:50:47:574 -> [UART, PM25] Data not available.
19:50:47:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:574 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:574 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:595 -> [UART, PM25] Reading data...
19:50:47:596 -> [UART, PM25] Data not available.
19:50:47:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:596 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:596 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:615 -> [UART, PM25] Reading data...
19:50:47:616 -> [UART, PM25] Data not available.
19:50:47:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:616 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:616 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:637 -> [UART, PM25] Reading data...
19:50:47:637 -> [UART, PM25] Data not available.
19:50:47:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:658 -> [UART, PM25] Reading data...
19:50:47:658 -> [UART, PM25] Data not available.
19:50:47:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:658 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:658 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:679 -> [UART, PM25] Reading data...
19:50:47:679 -> [UART, PM25] Data not available.
19:50:47:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:679 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:679 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:700 -> [UART, PM25] Reading data...
19:50:47:700 -> [UART, PM25] Data not available.
19:50:47:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:700 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:700 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:721 -> [UART, PM25] Reading data...
19:50:47:721 -> [UART, PM25] Data not available.
19:50:47:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:721 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:721 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:742 -> [UART, PM25] Reading data...
19:50:47:742 -> [UART, PM25] Data not available.
19:50:47:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:742 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:742 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:762 -> [UART, PM25] Reading data...
19:50:47:763 -> [UART, PM25] Data not available.
19:50:47:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:763 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:763 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:784 -> [UART, PM25] Reading data...
19:50:47:784 -> [UART, PM25] Data not available.
19:50:47:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:784 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:784 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:805 -> [UART, PM25] Reading data...
19:50:47:805 -> [UART, PM25] Data not available.
19:50:47:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:805 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:805 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:825 -> [UART, PM25] Reading data...
19:50:47:826 -> [UART, PM25] Data not available.
19:50:47:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:826 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:826 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:847 -> [UART, PM25] Reading data...
19:50:47:847 -> [UART, PM25] Data not available.
19:50:47:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:847 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:847 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:867 -> [UART, PM25] Reading data...
19:50:47:868 -> [UART, PM25] Data not available.
19:50:47:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:868 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:868 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:889 -> [UART, PM25] Reading data...
19:50:47:889 -> [UART, PM25] Data not available.
19:50:47:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:889 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:889 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:910 -> [UART, PM25] Reading data...
19:50:47:910 -> [UART, PM25] Data not available.
19:50:47:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:910 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:910 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:931 -> [UART, PM25] Reading data...
19:50:47:931 -> [UART, PM25] Data not available.
19:50:47:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:931 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:931 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:951 -> [UART, PM25] Reading data...
19:50:47:952 -> [UART, PM25] Data not available.
19:50:47:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:952 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:952 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:972 -> [UART, PM25] Reading data...
19:50:47:973 -> [UART, PM25] Data not available.
19:50:47:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:973 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:973 -> [UART, PM25] Uart available, resetting event queue..
19:50:47:994 -> [UART, PM25] Reading data...
19:50:47:994 -> [UART, PM25] Data not available.
19:50:47:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:47:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:47:994 -> [UART, PM25] Uart available, clearing write errors..
19:50:47:994 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:024 -> [UART, PM25] Reading data...
19:50:48:025 -> [UART, PM25] Data not available.
19:50:48:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:025 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:025 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:035 -> [UART, PM25] Reading data...
19:50:48:036 -> [UART, PM25] Data not available.
19:50:48:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:036 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:036 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:056 -> [UART, PM25] Reading data...
19:50:48:057 -> [UART, PM25] Data not available.
19:50:48:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:057 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:057 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:077 -> [UART, PM25] Reading data...
19:50:48:078 -> [UART, PM25] Data not available.
19:50:48:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:078 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:078 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:099 -> [UART, PM25] Reading data...
19:50:48:099 -> [UART, PM25] Data not available.
19:50:48:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:099 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:099 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:119 -> [UART, PM25] Reading data...
19:50:48:120 -> [UART, PM25] Data not available.
19:50:48:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:120 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:120 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:140 -> [UART, PM25] Reading data...
19:50:48:141 -> [UART, PM25] Data not available.
19:50:48:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:141 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:141 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:161 -> [UART, PM25] Reading data...
19:50:48:162 -> [UART, PM25] Data not available.
19:50:48:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:162 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:162 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:182 -> [UART, PM25] Reading data...
19:50:48:183 -> [UART, PM25] Data not available.
19:50:48:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:183 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:183 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:204 -> [UART, PM25] Reading data...
19:50:48:204 -> [UART, PM25] Data not available.
19:50:48:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:204 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:204 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:225 -> [UART, PM25] Reading data...
19:50:48:225 -> [UART, PM25] Data not available.
19:50:48:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:225 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:225 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:245 -> [UART, PM25] Reading data...
19:50:48:246 -> [UART, PM25] Data not available.
19:50:48:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:246 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:246 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:267 -> [UART, PM25] Reading data...
19:50:48:267 -> [UART, PM25] Data not available.
19:50:48:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:267 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:267 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:288 -> [UART, PM25] Reading data...
19:50:48:288 -> [UART, PM25] Data not available.
19:50:48:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:288 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:288 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:309 -> [UART, PM25] Reading data...
19:50:48:309 -> [UART, PM25] Data not available.
19:50:48:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:309 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:309 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:329 -> [UART, PM25] Reading data...
19:50:48:330 -> [UART, PM25] Data not available.
19:50:48:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:330 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:330 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:351 -> [UART, PM25] Reading data...
19:50:48:351 -> [UART, PM25] Data not available.
19:50:48:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:351 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:351 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:372 -> [UART, PM25] Reading data...
19:50:48:372 -> [UART, PM25] Data not available.
19:50:48:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:372 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:372 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:393 -> [UART, PM25] Reading data...
19:50:48:393 -> [UART, PM25] Data not available.
19:50:48:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:393 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:393 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:414 -> [UART, PM25] Reading data...
19:50:48:415 -> [UART, PM25] Data not available.
19:50:48:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:415 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:415 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:435 -> [UART, PM25] Reading data...
19:50:48:435 -> [UART, PM25] Data not available.
19:50:48:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:435 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:435 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:456 -> [UART, PM25] Reading data...
19:50:48:456 -> [UART, PM25] Data not available.
19:50:48:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:456 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:456 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:477 -> [UART, PM25] Reading data...
19:50:48:477 -> [UART, PM25] Data not available.
19:50:48:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:477 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:477 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:498 -> [UART, PM25] Reading data...
19:50:48:498 -> [UART, PM25] Data not available.
19:50:48:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:498 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:498 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:519 -> [UART, PM25] Reading data...
19:50:48:519 -> [UART, PM25] Data not available.
19:50:48:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:519 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:519 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:552 -> [UART, PM25] Reading data...
19:50:48:554 -> [UART, PM25] Data not available.
19:50:48:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:554 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:554 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:561 -> [UART, PM25] Reading data...
19:50:48:561 -> [UART, PM25] Data not available.
19:50:48:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:561 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:561 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:582 -> [UART, PM25] Reading data...
19:50:48:582 -> [UART, PM25] Data not available.
19:50:48:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:582 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:582 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:603 -> [UART, PM25] Reading data...
19:50:48:603 -> [UART, PM25] Data not available.
19:50:48:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:603 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:603 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:624 -> [UART, PM25] Reading data...
19:50:48:624 -> [UART, PM25] Data not available.
19:50:48:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:624 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:624 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:644 -> [UART, PM25] Reading data...
19:50:48:645 -> [UART, PM25] Data not available.
19:50:48:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:645 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:645 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:666 -> [UART, PM25] Reading data...
19:50:48:666 -> [UART, PM25] Data not available.
19:50:48:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:666 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:666 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:687 -> [UART, PM25] Reading data...
19:50:48:687 -> [UART, PM25] Data not available.
19:50:48:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:687 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:687 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:708 -> [UART, PM25] Reading data...
19:50:48:708 -> [UART, PM25] Data not available.
19:50:48:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:708 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:708 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:728 -> [UART, PM25] Reading data...
19:50:48:729 -> [UART, PM25] Data not available.
19:50:48:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:729 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:729 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:749 -> [UART, PM25] Reading data...
19:50:48:750 -> [UART, PM25] Data not available.
19:50:48:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:750 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:750 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:771 -> [UART, PM25] Reading data...
19:50:48:771 -> [UART, PM25] Data not available.
19:50:48:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:771 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:771 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:791 -> [UART, PM25] Reading data...
19:50:48:792 -> [UART, PM25] Data not available.
19:50:48:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:792 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:792 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:813 -> [UART, PM25] Reading data...
19:50:48:813 -> [UART, PM25] Data not available.
19:50:48:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:813 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:813 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:834 -> [UART, PM25] Reading data...
19:50:48:834 -> [UART, PM25] Data not available.
19:50:48:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:834 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:834 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:855 -> [UART, PM25] Reading data...
19:50:48:855 -> [UART, PM25] Data not available.
19:50:48:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:855 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:855 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:876 -> [UART, PM25] Reading data...
19:50:48:876 -> [UART, PM25] Data not available.
19:50:48:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:876 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:876 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:896 -> [UART, PM25] Reading data...
19:50:48:898 -> [UART, PM25] Data not available.
19:50:48:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:898 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:898 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:918 -> [UART, PM25] Reading data...
19:50:48:918 -> [UART, PM25] Data not available.
19:50:48:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:918 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:918 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:939 -> [UART, PM25] Reading data...
19:50:48:939 -> [UART, PM25] Data not available.
19:50:48:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:939 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:939 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:959 -> [UART, PM25] Reading data...
19:50:48:960 -> [UART, PM25] Data not available.
19:50:48:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:960 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:960 -> [UART, PM25] Uart available, resetting event queue..
19:50:48:980 -> [UART, PM25] Reading data...
19:50:48:981 -> [UART, PM25] Data not available.
19:50:48:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:48:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:48:981 -> [UART, PM25] Uart available, clearing write errors..
19:50:48:981 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:002 -> [UART, PM25] Reading data...
19:50:49:002 -> [UART, PM25] Data not available.
19:50:49:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:002 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:002 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:023 -> [UART, PM25] Reading data...
19:50:49:023 -> [UART, PM25] Data not available.
19:50:49:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:023 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:023 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:044 -> [UART, PM25] Reading data...
19:50:49:044 -> [UART, PM25] Data not available.
19:50:49:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:044 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:044 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:064 -> [UART, PM25] Reading data...
19:50:49:065 -> [UART, PM25] Data not available.
19:50:49:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:065 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:065 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:086 -> [UART, PM25] Reading data...
19:50:49:086 -> [UART, PM25] Data not available.
19:50:49:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:086 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:086 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:106 -> [UART, PM25] Reading data...
19:50:49:106 -> [UART, PM25] Data not available.
19:50:49:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:107 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:107 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:128 -> [UART, PM25] Reading data...
19:50:49:128 -> [UART, PM25] Data not available.
19:50:49:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:128 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:128 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:149 -> [UART, PM25] Reading data...
19:50:49:149 -> [UART, PM25] Data not available.
19:50:49:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:149 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:149 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:169 -> [UART, PM25] Reading data...
19:50:49:170 -> [UART, PM25] Data not available.
19:50:49:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:170 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:170 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:191 -> [UART, PM25] Reading data...
19:50:49:192 -> [UART, PM25] Data not available.
19:50:49:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:192 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:192 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:211 -> [UART, PM25] Reading data...
19:50:49:212 -> [UART, PM25] Data not available.
19:50:49:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:212 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:212 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:233 -> [UART, PM25] Reading data...
19:50:49:233 -> [UART, PM25] Data not available.
19:50:49:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:233 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:233 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:254 -> [UART, PM25] Reading data...
19:50:49:276 -> [UART, PM25] Data not available.
19:50:49:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:276 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:276 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:276 -> [UART, PM25] Reading data...
19:50:49:276 -> [UART, PM25] Data not available.
19:50:49:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:276 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:276 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:295 -> [UART, PM25] Reading data...
19:50:49:295 -> [UART, PM25] Data not available.
19:50:49:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:296 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:296 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:317 -> [UART, PM25] Reading data...
19:50:49:317 -> [UART, PM25] Data not available.
19:50:49:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:317 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:317 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:337 -> [UART, PM25] Reading data...
19:50:49:338 -> [UART, PM25] Data not available.
19:50:49:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:338 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:338 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:358 -> [UART, PM25] Reading data...
19:50:49:359 -> [UART, PM25] Data not available.
19:50:49:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:359 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:359 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:379 -> [UART, PM25] Reading data...
19:50:49:380 -> [UART, PM25] Data not available.
19:50:49:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:380 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:380 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:401 -> [UART, PM25] Reading data...
19:50:49:401 -> [UART, PM25] Data not available.
19:50:49:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:401 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:401 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:422 -> [UART, PM25] Reading data...
19:50:49:422 -> [UART, PM25] Data not available.
19:50:49:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:422 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:422 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:443 -> [UART, PM25] Reading data...
19:50:49:443 -> [UART, PM25] Data not available.
19:50:49:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:443 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:443 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:464 -> [UART, PM25] Reading data...
19:50:49:464 -> [UART, PM25] Data not available.
19:50:49:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:464 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:464 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:485 -> [UART, PM25] Reading data...
19:50:49:489 -> [UART, PM25] Data not available.
19:50:49:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:489 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:489 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:505 -> [UART, PM25] Reading data...
19:50:49:506 -> [UART, PM25] Data not available.
19:50:49:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:506 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:506 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:527 -> [UART, PM25] Reading data...
19:50:49:527 -> [UART, PM25] Data not available.
19:50:49:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:527 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:527 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:547 -> [UART, PM25] Reading data...
19:50:49:548 -> [UART, PM25] Data not available.
19:50:49:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:548 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:548 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:579 -> [UART, PM25] Reading data...
19:50:49:579 -> [UART, PM25] Data not available.
19:50:49:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:579 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:579 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:589 -> [UART, PM25] Reading data...
19:50:49:590 -> [UART, PM25] Data not available.
19:50:49:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:590 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:590 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:611 -> [UART, PM25] Reading data...
19:50:49:611 -> [UART, PM25] Data not available.
19:50:49:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:611 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:611 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:632 -> [UART, PM25] Reading data...
19:50:49:637 -> [UART, PM25] Data not available.
19:50:49:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:637 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:637 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:652 -> [UART, PM25] Reading data...
19:50:49:653 -> [UART, PM25] Data not available.
19:50:49:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:653 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:653 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:674 -> [UART, PM25] Reading data...
19:50:49:674 -> [UART, PM25] Data not available.
19:50:49:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:674 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:674 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:695 -> [UART, PM25] Reading data...
19:50:49:696 -> [UART, PM25] Data not available.
19:50:49:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:696 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:696 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:716 -> [UART, PM25] Reading data...
19:50:49:716 -> [UART, PM25] Data not available.
19:50:49:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:716 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:716 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:737 -> [UART, PM25] Reading data...
19:50:49:737 -> [UART, PM25] Data not available.
19:50:49:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:737 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:737 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:757 -> [UART, PM25] Reading data...
19:50:49:758 -> [UART, PM25] Data not available.
19:50:49:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:758 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:758 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:778 -> [UART, PM25] Reading data...
19:50:49:779 -> [UART, PM25] Data not available.
19:50:49:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:779 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:779 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:799 -> [UART, PM25] Reading data...
19:50:49:800 -> [UART, PM25] Data not available.
19:50:49:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:800 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:800 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:820 -> [UART, PM25] Reading data...
19:50:49:821 -> [UART, PM25] Data not available.
19:50:49:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:821 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:821 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:842 -> [UART, PM25] Reading data...
19:50:49:842 -> [UART, PM25] Data not available.
19:50:49:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:842 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:842 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:862 -> [UART, PM25] Reading data...
19:50:49:863 -> [UART, PM25] Data not available.
19:50:49:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:863 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:863 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:884 -> [UART, PM25] Reading data...
19:50:49:884 -> [UART, PM25] Data not available.
19:50:49:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:884 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:884 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:904 -> [UART, PM25] Reading data...
19:50:49:905 -> [UART, PM25] Data not available.
19:50:49:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:905 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:905 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:925 -> [UART, PM25] Reading data...
19:50:49:926 -> [UART, PM25] Data not available.
19:50:49:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:926 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:926 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:947 -> [UART, PM25] Reading data...
19:50:49:947 -> [UART, PM25] Data not available.
19:50:49:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:947 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:947 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:967 -> [UART, PM25] Reading data...
19:50:49:968 -> [UART, PM25] Data not available.
19:50:49:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:968 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:968 -> [UART, PM25] Uart available, resetting event queue..
19:50:49:989 -> [UART, PM25] Reading data...
19:50:49:990 -> [UART, PM25] Data not available.
19:50:49:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:49:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:49:990 -> [UART, PM25] Uart available, clearing write errors..
19:50:49:990 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:010 -> [UART, PM25] Reading data...
19:50:50:010 -> [UART, PM25] Data not available.
19:50:50:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:010 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:010 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:030 -> [UART, PM25] Reading data...
19:50:50:031 -> [UART, PM25] Data not available.
19:50:50:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:031 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:031 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:052 -> [UART, PM25] Reading data...
19:50:50:052 -> [UART, PM25] Data not available.
19:50:50:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:052 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:052 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:072 -> [UART, PM25] Reading data...
19:50:50:073 -> [UART, PM25] Data not available.
19:50:50:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:073 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:073 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:096 -> [UART, PM25] Reading data...
19:50:50:097 -> [UART, PM25] Data not available.
19:50:50:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:097 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:097 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:114 -> [UART, PM25] Reading data...
19:50:50:115 -> [UART, PM25] Data not available.
19:50:50:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:115 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:115 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:136 -> [UART, PM25] Reading data...
19:50:50:136 -> [UART, PM25] Data not available.
19:50:50:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:136 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:136 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:157 -> [UART, PM25] Reading data...
19:50:50:157 -> [UART, PM25] Data not available.
19:50:50:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:157 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:157 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:177 -> [UART, PM25] Reading data...
19:50:50:178 -> [UART, PM25] Data not available.
19:50:50:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:178 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:178 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:199 -> [UART, PM25] Reading data...
19:50:50:199 -> [UART, PM25] Data not available.
19:50:50:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:199 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:199 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:220 -> [UART, PM25] Reading data...
19:50:50:220 -> [UART, PM25] Data not available.
19:50:50:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:220 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:220 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:241 -> [UART, PM25] Reading data...
19:50:50:241 -> [UART, PM25] Data not available.
19:50:50:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:241 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:241 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:262 -> [UART, PM25] Reading data...
19:50:50:262 -> [UART, PM25] Data not available.
19:50:50:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:262 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:262 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:282 -> [UART, PM25] Reading data...
19:50:50:283 -> [UART, PM25] Data not available.
19:50:50:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:283 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:283 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:303 -> [UART, PM25] Reading data...
19:50:50:304 -> [UART, PM25] Data not available.
19:50:50:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:304 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:304 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:324 -> [UART, PM25] Reading data...
19:50:50:325 -> [UART, PM25] Data not available.
19:50:50:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:325 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:325 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:346 -> [UART, PM25] Reading data...
19:50:50:346 -> [UART, PM25] Data not available.
19:50:50:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:346 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:346 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:367 -> [UART, PM25] Reading data...
19:50:50:367 -> [UART, PM25] Data not available.
19:50:50:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:367 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:367 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:388 -> [UART, PM25] Reading data...
19:50:50:388 -> [UART, PM25] Data not available.
19:50:50:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:388 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:388 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:409 -> [UART, PM25] Reading data...
19:50:50:409 -> [UART, PM25] Data not available.
19:50:50:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:409 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:409 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:429 -> [UART, PM25] Reading data...
19:50:50:430 -> [UART, PM25] Data not available.
19:50:50:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:430 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:430 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:451 -> [UART, PM25] Reading data...
19:50:50:451 -> [UART, PM25] Data not available.
19:50:50:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:451 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:451 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:472 -> [UART, PM25] Reading data...
19:50:50:472 -> [UART, PM25] Data not available.
19:50:50:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:472 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:472 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:493 -> [UART, PM25] Reading data...
19:50:50:493 -> [UART, PM25] Data not available.
19:50:50:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:493 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:493 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:514 -> [UART, PM25] Reading data...
19:50:50:514 -> [UART, PM25] Data not available.
19:50:50:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:514 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:514 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:534 -> [UART, PM25] Reading data...
19:50:50:535 -> [UART, PM25] Data not available.
19:50:50:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:535 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:535 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:556 -> [UART, PM25] Reading data...
19:50:50:556 -> [UART, PM25] Data not available.
19:50:50:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:556 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:556 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:577 -> [UART, PM25] Reading data...
19:50:50:577 -> [UART, PM25] Data not available.
19:50:50:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:578 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:578 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:606 -> [UART, PM25] Reading data...
19:50:50:607 -> [UART, PM25] Data not available.
19:50:50:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:607 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:607 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:619 -> [UART, PM25] Reading data...
19:50:50:619 -> [UART, PM25] Data not available.
19:50:50:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:619 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:619 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:639 -> [UART, PM25] Reading data...
19:50:50:640 -> [UART, PM25] Data not available.
19:50:50:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:640 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:640 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:661 -> [UART, PM25] Reading data...
19:50:50:661 -> [UART, PM25] Data not available.
19:50:50:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:661 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:661 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:681 -> [UART, PM25] Reading data...
19:50:50:682 -> [UART, PM25] Data not available.
19:50:50:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:682 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:682 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:703 -> [UART, PM25] Reading data...
19:50:50:703 -> [UART, PM25] Data not available.
19:50:50:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:703 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:703 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:723 -> [UART, PM25] Reading data...
19:50:50:724 -> [UART, PM25] Data not available.
19:50:50:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:724 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:724 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:745 -> [UART, PM25] Reading data...
19:50:50:745 -> [UART, PM25] Data not available.
19:50:50:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:745 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:745 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:766 -> [UART, PM25] Reading data...
19:50:50:766 -> [UART, PM25] Data not available.
19:50:50:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:766 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:766 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:786 -> [UART, PM25] Reading data...
19:50:50:787 -> [UART, PM25] Data not available.
19:50:50:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:787 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:787 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:808 -> [UART, PM25] Reading data...
19:50:50:808 -> [UART, PM25] Data not available.
19:50:50:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:808 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:808 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:832 -> [UART, PM25] Reading data...
19:50:50:833 -> [UART, PM25] Data not available.
19:50:50:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:833 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:833 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:850 -> [UART, PM25] Reading data...
19:50:50:850 -> [UART, PM25] Data not available.
19:50:50:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:850 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:850 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:871 -> [UART, PM25] Reading data...
19:50:50:871 -> [UART, PM25] Data not available.
19:50:50:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:50:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:50:871 -> [UART, PM25] Uart available, clearing write errors..
19:50:50:871 -> [UART, PM25] Uart available, resetting event queue..
19:50:50:871 -> PING!
19:50:51:085 -> [UART, PM25] Reading data...
19:50:51:085 -> [UART, PM25] Data not available.
19:50:51:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:085 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:085 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:140 -> [UART, PM25] Reading data...
19:50:51:142 -> [UART, PM25] Data not available.
19:50:51:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:142 -> [UART, PM25] Reading data...
19:50:51:142 -> [UART, PM25] Data not available.
19:50:51:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:152 -> [UART, PM25] Reading data...
19:50:51:154 -> [UART, PM25] Data not available.
19:50:51:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:154 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:154 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:169 -> [UART, PM25] Reading data...
19:50:51:169 -> [UART, PM25] Data not available.
19:50:51:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:169 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:169 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:189 -> [UART, PM25] Reading data...
19:50:51:190 -> [UART, PM25] Data not available.
19:50:51:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:190 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:190 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:210 -> [UART, PM25] Reading data...
19:50:51:211 -> [UART, PM25] Data not available.
19:50:51:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:211 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:211 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:232 -> [UART, PM25] Reading data...
19:50:51:232 -> [UART, PM25] Data not available.
19:50:51:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:232 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:232 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:252 -> [UART, PM25] Reading data...
19:50:51:253 -> [UART, PM25] Data not available.
19:50:51:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:253 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:253 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:274 -> [UART, PM25] Reading data...
19:50:51:274 -> [UART, PM25] Data not available.
19:50:51:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:274 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:274 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:294 -> [UART, PM25] Reading data...
19:50:51:295 -> [UART, PM25] Data not available.
19:50:51:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:295 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:295 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:316 -> [UART, PM25] Reading data...
19:50:51:316 -> [UART, PM25] Data not available.
19:50:51:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:316 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:316 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:336 -> [UART, PM25] Reading data...
19:50:51:337 -> [UART, PM25] Data not available.
19:50:51:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:337 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:337 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:358 -> [UART, PM25] Reading data...
19:50:51:358 -> [UART, PM25] Data not available.
19:50:51:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:358 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:358 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:379 -> [UART, PM25] Reading data...
19:50:51:379 -> [UART, PM25] Data not available.
19:50:51:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:379 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:379 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:399 -> [UART, PM25] Reading data...
19:50:51:400 -> [UART, PM25] Data not available.
19:50:51:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:400 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:400 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:421 -> [UART, PM25] Reading data...
19:50:51:421 -> [UART, PM25] Data not available.
19:50:51:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:421 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:421 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:441 -> [UART, PM25] Reading data...
19:50:51:442 -> [UART, PM25] Data not available.
19:50:51:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:442 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:442 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:463 -> [UART, PM25] Reading data...
19:50:51:463 -> [UART, PM25] Data not available.
19:50:51:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:463 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:463 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:484 -> [UART, PM25] Reading data...
19:50:51:484 -> [UART, PM25] Data not available.
19:50:51:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:484 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:484 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:504 -> [UART, PM25] Reading data...
19:50:51:505 -> [UART, PM25] Data not available.
19:50:51:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:505 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:505 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:526 -> [UART, PM25] Reading data...
19:50:51:526 -> [UART, PM25] Data not available.
19:50:51:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:526 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:526 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:546 -> [UART, PM25] Reading data...
19:50:51:547 -> [UART, PM25] Data not available.
19:50:51:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:547 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:547 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:568 -> [UART, PM25] Reading data...
19:50:51:568 -> [UART, PM25] Data not available.
19:50:51:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:568 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:568 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:588 -> [UART, PM25] Reading data...
19:50:51:589 -> [UART, PM25] Data not available.
19:50:51:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:589 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:589 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:610 -> [UART, PM25] Reading data...
19:50:51:610 -> [UART, PM25] Data not available.
19:50:51:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:610 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:610 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:631 -> [UART, PM25] Reading data...
19:50:51:631 -> [UART, PM25] Data not available.
19:50:51:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:631 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:631 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:657 -> [UART, PM25] Reading data...
19:50:51:658 -> [UART, PM25] Data not available.
19:50:51:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:658 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:658 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:673 -> [UART, PM25] Reading data...
19:50:51:673 -> [UART, PM25] Data not available.
19:50:51:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:673 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:673 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:694 -> [UART, PM25] Reading data...
19:50:51:694 -> [UART, PM25] Data not available.
19:50:51:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:694 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:694 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:715 -> [UART, PM25] Reading data...
19:50:51:715 -> [UART, PM25] Data not available.
19:50:51:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:715 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:715 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:736 -> [UART, PM25] Reading data...
19:50:51:736 -> [UART, PM25] Data not available.
19:50:51:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:736 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:736 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:756 -> [UART, PM25] Reading data...
19:50:51:757 -> [UART, PM25] Data not available.
19:50:51:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:757 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:757 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:778 -> [UART, PM25] Reading data...
19:50:51:778 -> [UART, PM25] Data not available.
19:50:51:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:778 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:778 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:798 -> [UART, PM25] Reading data...
19:50:51:799 -> [UART, PM25] Data not available.
19:50:51:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:799 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:799 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:820 -> [UART, PM25] Reading data...
19:50:51:820 -> [UART, PM25] Data not available.
19:50:51:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:820 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:820 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:840 -> [UART, PM25] Reading data...
19:50:51:841 -> [UART, PM25] Data not available.
19:50:51:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:841 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:841 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:862 -> [UART, PM25] Reading data...
19:50:51:862 -> [UART, PM25] Data not available.
19:50:51:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:862 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:862 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:883 -> [UART, PM25] Reading data...
19:50:51:883 -> [UART, PM25] Data not available.
19:50:51:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:883 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:883 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:903 -> [UART, PM25] Reading data...
19:50:51:904 -> [UART, PM25] Data not available.
19:50:51:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:904 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:904 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:925 -> [UART, PM25] Reading data...
19:50:51:925 -> [UART, PM25] Data not available.
19:50:51:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:925 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:925 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:946 -> [UART, PM25] Reading data...
19:50:51:946 -> [UART, PM25] Data not available.
19:50:51:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:946 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:946 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:967 -> [UART, PM25] Reading data...
19:50:51:967 -> [UART, PM25] Data not available.
19:50:51:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:967 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:967 -> [UART, PM25] Uart available, resetting event queue..
19:50:51:988 -> [UART, PM25] Reading data...
19:50:51:988 -> [UART, PM25] Data not available.
19:50:51:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:51:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:51:988 -> [UART, PM25] Uart available, clearing write errors..
19:50:51:988 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:008 -> [UART, PM25] Reading data...
19:50:52:009 -> [UART, PM25] Data not available.
19:50:52:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:009 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:009 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:029 -> [UART, PM25] Reading data...
19:50:52:030 -> [UART, PM25] Data not available.
19:50:52:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:030 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:030 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:050 -> [UART, PM25] Reading data...
19:50:52:051 -> [UART, PM25] Data not available.
19:50:52:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:051 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:051 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:071 -> [UART, PM25] Reading data...
19:50:52:072 -> [UART, PM25] Data not available.
19:50:52:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:072 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:072 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:093 -> [UART, PM25] Reading data...
19:50:52:093 -> [UART, PM25] Data not available.
19:50:52:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:093 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:093 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:114 -> [UART, PM25] Reading data...
19:50:52:114 -> [UART, PM25] Data not available.
19:50:52:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:114 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:114 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:134 -> [UART, PM25] Reading data...
19:50:52:135 -> [UART, PM25] Data not available.
19:50:52:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:135 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:135 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:155 -> [UART, PM25] Reading data...
19:50:52:156 -> [UART, PM25] Data not available.
19:50:52:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:156 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:156 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:176 -> [UART, PM25] Reading data...
19:50:52:177 -> [UART, PM25] Data not available.
19:50:52:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:177 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:177 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:198 -> [UART, PM25] Reading data...
19:50:52:198 -> [UART, PM25] Data not available.
19:50:52:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:198 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:198 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:218 -> [UART, PM25] Reading data...
19:50:52:219 -> [UART, PM25] Data not available.
19:50:52:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:219 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:219 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:239 -> [UART, PM25] Reading data...
19:50:52:240 -> [UART, PM25] Data not available.
19:50:52:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:240 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:240 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:260 -> [UART, PM25] Reading data...
19:50:52:261 -> [UART, PM25] Data not available.
19:50:52:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:261 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:261 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:281 -> [UART, PM25] Reading data...
19:50:52:282 -> [UART, PM25] Data not available.
19:50:52:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:282 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:282 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:302 -> [UART, PM25] Reading data...
19:50:52:303 -> [UART, PM25] Data not available.
19:50:52:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:303 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:303 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:323 -> [UART, PM25] Reading data...
19:50:52:324 -> [UART, PM25] Data not available.
19:50:52:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:324 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:324 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:345 -> [UART, PM25] Reading data...
19:50:52:345 -> [UART, PM25] Data not available.
19:50:52:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:345 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:345 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:365 -> [UART, PM25] Reading data...
19:50:52:366 -> [UART, PM25] Data not available.
19:50:52:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:366 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:366 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:387 -> [UART, PM25] Reading data...
19:50:52:387 -> [UART, PM25] Data not available.
19:50:52:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:387 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:387 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:408 -> [UART, PM25] Reading data...
19:50:52:408 -> [UART, PM25] Data not available.
19:50:52:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:408 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:408 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:429 -> [UART, PM25] Reading data...
19:50:52:429 -> [UART, PM25] Data not available.
19:50:52:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:429 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:429 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:449 -> [UART, PM25] Reading data...
19:50:52:450 -> [UART, PM25] Data not available.
19:50:52:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:450 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:450 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:471 -> [UART, PM25] Reading data...
19:50:52:471 -> [UART, PM25] Data not available.
19:50:52:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:471 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:471 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:492 -> [UART, PM25] Reading data...
19:50:52:492 -> [UART, PM25] Data not available.
19:50:52:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:492 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:492 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:513 -> [UART, PM25] Reading data...
19:50:52:513 -> [UART, PM25] Data not available.
19:50:52:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:513 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:513 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:534 -> [UART, PM25] Reading data...
19:50:52:534 -> [UART, PM25] Data not available.
19:50:52:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:534 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:534 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:555 -> [UART, PM25] Reading data...
19:50:52:555 -> [UART, PM25] Data not available.
19:50:52:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:555 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:555 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:576 -> [UART, PM25] Reading data...
19:50:52:576 -> [UART, PM25] Data not available.
19:50:52:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:576 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:576 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:597 -> [UART, PM25] Reading data...
19:50:52:597 -> [UART, PM25] Data not available.
19:50:52:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:597 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:597 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:618 -> [UART, PM25] Reading data...
19:50:52:618 -> [UART, PM25] Data not available.
19:50:52:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:618 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:618 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:639 -> [UART, PM25] Reading data...
19:50:52:639 -> [UART, PM25] Data not available.
19:50:52:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:639 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:639 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:660 -> [UART, PM25] Reading data...
19:50:52:660 -> [UART, PM25] Data not available.
19:50:52:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:660 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:660 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:681 -> [UART, PM25] Reading data...
19:50:52:681 -> [UART, PM25] Data not available.
19:50:52:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:681 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:681 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:702 -> [UART, PM25] Reading data...
19:50:52:702 -> [UART, PM25] Data not available.
19:50:52:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:702 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:702 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:723 -> [UART, PM25] Reading data...
19:50:52:723 -> [UART, PM25] Data not available.
19:50:52:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:723 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:723 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:743 -> [UART, PM25] Reading data...
19:50:52:744 -> [UART, PM25] Data not available.
19:50:52:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:744 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:744 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:765 -> [UART, PM25] Reading data...
19:50:52:765 -> [UART, PM25] Data not available.
19:50:52:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:765 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:765 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:786 -> [UART, PM25] Reading data...
19:50:52:786 -> [UART, PM25] Data not available.
19:50:52:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:786 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:786 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:807 -> [UART, PM25] Reading data...
19:50:52:807 -> [UART, PM25] Data not available.
19:50:52:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:807 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:807 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:845 -> [UART, PM25] Reading data...
19:50:52:873 -> [UART, PM25] Data not available.
19:50:52:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:873 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:873 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:873 -> [UART, PM25] Reading data...
19:50:52:873 -> [UART, PM25] Data not available.
19:50:52:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:873 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:873 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:873 -> [UART, PM25] Reading data...
19:50:52:873 -> [UART, PM25] Data not available.
19:50:52:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:873 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:873 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:890 -> [UART, PM25] Reading data...
19:50:52:891 -> [UART, PM25] Data not available.
19:50:52:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:891 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:891 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:912 -> [UART, PM25] Reading data...
19:50:52:912 -> [UART, PM25] Data not available.
19:50:52:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:912 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:912 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:933 -> [UART, PM25] Reading data...
19:50:52:933 -> [UART, PM25] Data not available.
19:50:52:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:933 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:933 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:954 -> [UART, PM25] Reading data...
19:50:52:954 -> [UART, PM25] Data not available.
19:50:52:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:954 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:954 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:974 -> [UART, PM25] Reading data...
19:50:52:975 -> [UART, PM25] Data not available.
19:50:52:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:975 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:975 -> [UART, PM25] Uart available, resetting event queue..
19:50:52:996 -> [UART, PM25] Reading data...
19:50:52:996 -> [UART, PM25] Data not available.
19:50:52:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:52:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:52:996 -> [UART, PM25] Uart available, clearing write errors..
19:50:52:996 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:017 -> [UART, PM25] Reading data...
19:50:53:017 -> [UART, PM25] Data not available.
19:50:53:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:017 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:017 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:038 -> [UART, PM25] Reading data...
19:50:53:038 -> [UART, PM25] Data not available.
19:50:53:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:038 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:038 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:059 -> [UART, PM25] Reading data...
19:50:53:059 -> [UART, PM25] Data not available.
19:50:53:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:059 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:059 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:079 -> [UART, PM25] Reading data...
19:50:53:080 -> [UART, PM25] Data not available.
19:50:53:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:080 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:080 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:101 -> [UART, PM25] Reading data...
19:50:53:101 -> [UART, PM25] Data not available.
19:50:53:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:101 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:101 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:122 -> [UART, PM25] Reading data...
19:50:53:122 -> [UART, PM25] Data not available.
19:50:53:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:122 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:122 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:143 -> [UART, PM25] Reading data...
19:50:53:143 -> [UART, PM25] Data not available.
19:50:53:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:143 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:143 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:164 -> [UART, PM25] Reading data...
19:50:53:164 -> [UART, PM25] Data not available.
19:50:53:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:164 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:164 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:192 -> [UART, PM25] Reading data...
19:50:53:194 -> [UART, PM25] Data not available.
19:50:53:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:194 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:194 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:206 -> [UART, PM25] Reading data...
19:50:53:206 -> [UART, PM25] Data not available.
19:50:53:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:206 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:206 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:227 -> [UART, PM25] Reading data...
19:50:53:227 -> [UART, PM25] Data not available.
19:50:53:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:227 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:227 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:248 -> [UART, PM25] Reading data...
19:50:53:248 -> [UART, PM25] Data not available.
19:50:53:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:248 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:248 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:268 -> [UART, PM25] Reading data...
19:50:53:269 -> [UART, PM25] Data not available.
19:50:53:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:269 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:269 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:290 -> [UART, PM25] Reading data...
19:50:53:290 -> [UART, PM25] Data not available.
19:50:53:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:290 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:290 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:311 -> [UART, PM25] Reading data...
19:50:53:311 -> [UART, PM25] Data not available.
19:50:53:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:311 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:311 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:332 -> [UART, PM25] Reading data...
19:50:53:332 -> [UART, PM25] Data not available.
19:50:53:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:332 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:332 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:353 -> [UART, PM25] Reading data...
19:50:53:353 -> [UART, PM25] Data not available.
19:50:53:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:353 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:353 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:374 -> [UART, PM25] Reading data...
19:50:53:374 -> [UART, PM25] Data not available.
19:50:53:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:374 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:374 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:394 -> [UART, PM25] Reading data...
19:50:53:395 -> [UART, PM25] Data not available.
19:50:53:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:395 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:395 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:416 -> [UART, PM25] Reading data...
19:50:53:416 -> [UART, PM25] Data not available.
19:50:53:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:416 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:416 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:437 -> [UART, PM25] Reading data...
19:50:53:437 -> [UART, PM25] Data not available.
19:50:53:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:437 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:437 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:457 -> [UART, PM25] Reading data...
19:50:53:458 -> [UART, PM25] Data not available.
19:50:53:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:458 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:458 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:478 -> [UART, PM25] Reading data...
19:50:53:479 -> [UART, PM25] Data not available.
19:50:53:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:479 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:479 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:500 -> [UART, PM25] Reading data...
19:50:53:500 -> [UART, PM25] Data not available.
19:50:53:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:500 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:500 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:521 -> [UART, PM25] Reading data...
19:50:53:521 -> [UART, PM25] Data not available.
19:50:53:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:521 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:521 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:541 -> [UART, PM25] Reading data...
19:50:53:542 -> [UART, PM25] Data not available.
19:50:53:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:542 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:542 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:563 -> [UART, PM25] Reading data...
19:50:53:563 -> [UART, PM25] Data not available.
19:50:53:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:563 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:563 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:584 -> [UART, PM25] Reading data...
19:50:53:584 -> [UART, PM25] Data not available.
19:50:53:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:584 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:584 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:605 -> [UART, PM25] Reading data...
19:50:53:605 -> [UART, PM25] Data not available.
19:50:53:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:605 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:605 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:626 -> [UART, PM25] Reading data...
19:50:53:626 -> [UART, PM25] Data not available.
19:50:53:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:626 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:626 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:646 -> [UART, PM25] Reading data...
19:50:53:647 -> [UART, PM25] Data not available.
19:50:53:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:647 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:647 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:668 -> [UART, PM25] Reading data...
19:50:53:668 -> [UART, PM25] Data not available.
19:50:53:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:668 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:668 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:689 -> [UART, PM25] Reading data...
19:50:53:689 -> [UART, PM25] Data not available.
19:50:53:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:689 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:689 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:710 -> [UART, PM25] Reading data...
19:50:53:711 -> [UART, PM25] Data not available.
19:50:53:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:711 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:711 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:731 -> [UART, PM25] Reading data...
19:50:53:731 -> [UART, PM25] Data not available.
19:50:53:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:731 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:731 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:752 -> [UART, PM25] Reading data...
19:50:53:752 -> [UART, PM25] Data not available.
19:50:53:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:752 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:752 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:773 -> [UART, PM25] Reading data...
19:50:53:773 -> [UART, PM25] Data not available.
19:50:53:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:773 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:773 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:793 -> [UART, PM25] Reading data...
19:50:53:794 -> [UART, PM25] Data not available.
19:50:53:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:794 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:794 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:815 -> [UART, PM25] Reading data...
19:50:53:815 -> [UART, PM25] Data not available.
19:50:53:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:815 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:815 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:836 -> [UART, PM25] Reading data...
19:50:53:836 -> [UART, PM25] Data not available.
19:50:53:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:836 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:836 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:856 -> [UART, PM25] Reading data...
19:50:53:857 -> [UART, PM25] Data not available.
19:50:53:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:857 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:857 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:878 -> [UART, PM25] Reading data...
19:50:53:878 -> [UART, PM25] Data not available.
19:50:53:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:878 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:878 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:899 -> [UART, PM25] Reading data...
19:50:53:900 -> [UART, PM25] Data not available.
19:50:53:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:900 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:900 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:919 -> [UART, PM25] Reading data...
19:50:53:920 -> [UART, PM25] Data not available.
19:50:53:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:920 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:920 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:941 -> [UART, PM25] Reading data...
19:50:53:941 -> [UART, PM25] Data not available.
19:50:53:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:941 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:941 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:962 -> [UART, PM25] Reading data...
19:50:53:962 -> [UART, PM25] Data not available.
19:50:53:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:962 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:962 -> [UART, PM25] Uart available, resetting event queue..
19:50:53:983 -> [UART, PM25] Reading data...
19:50:53:983 -> [UART, PM25] Data not available.
19:50:53:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:53:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:53:983 -> [UART, PM25] Uart available, clearing write errors..
19:50:53:983 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:004 -> [UART, PM25] Reading data...
19:50:54:004 -> [UART, PM25] Data not available.
19:50:54:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:004 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:004 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:025 -> [UART, PM25] Reading data...
19:50:54:025 -> [UART, PM25] Data not available.
19:50:54:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:025 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:025 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:045 -> [UART, PM25] Reading data...
19:50:54:046 -> [UART, PM25] Data not available.
19:50:54:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:046 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:046 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:067 -> [UART, PM25] Reading data...
19:50:54:067 -> [UART, PM25] Data not available.
19:50:54:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:067 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:067 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:087 -> [UART, PM25] Reading data...
19:50:54:088 -> [UART, PM25] Data not available.
19:50:54:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:088 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:088 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:109 -> [UART, PM25] Reading data...
19:50:54:113 -> [UART, PM25] Data not available.
19:50:54:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:113 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:113 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:130 -> [UART, PM25] Reading data...
19:50:54:130 -> [UART, PM25] Data not available.
19:50:54:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:130 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:130 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:150 -> [UART, PM25] Reading data...
19:50:54:151 -> [UART, PM25] Data not available.
19:50:54:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:151 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:151 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:171 -> [UART, PM25] Reading data...
19:50:54:172 -> [UART, PM25] Data not available.
19:50:54:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:172 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:172 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:192 -> [UART, PM25] Reading data...
19:50:54:193 -> [UART, PM25] Data not available.
19:50:54:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:193 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:193 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:227 -> [UART, PM25] Reading data...
19:50:54:228 -> [UART, PM25] Data not available.
19:50:54:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:228 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:228 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:235 -> [UART, PM25] Reading data...
19:50:54:235 -> [UART, PM25] Data not available.
19:50:54:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:235 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:235 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:256 -> [UART, PM25] Reading data...
19:50:54:256 -> [UART, PM25] Data not available.
19:50:54:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:256 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:256 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:276 -> [UART, PM25] Reading data...
19:50:54:276 -> [UART, PM25] Data not available.
19:50:54:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:277 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:277 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:297 -> [UART, PM25] Reading data...
19:50:54:298 -> [UART, PM25] Data not available.
19:50:54:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:298 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:298 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:319 -> [UART, PM25] Reading data...
19:50:54:325 -> [UART, PM25] Data not available.
19:50:54:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:325 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:325 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:340 -> [UART, PM25] Reading data...
19:50:54:340 -> [UART, PM25] Data not available.
19:50:54:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:340 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:340 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:361 -> [UART, PM25] Reading data...
19:50:54:361 -> [UART, PM25] Data not available.
19:50:54:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:361 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:361 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:417 -> [UART, PM25] Reading data...
19:50:54:418 -> [UART, PM25] Data not available.
19:50:54:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:418 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:418 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:418 -> [UART, PM25] Reading data...
19:50:54:418 -> [UART, PM25] Data not available.
19:50:54:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:418 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:418 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:426 -> [UART, PM25] Reading data...
19:50:54:426 -> [UART, PM25] Data not available.
19:50:54:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:426 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:426 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:445 -> [UART, PM25] Reading data...
19:50:54:445 -> [UART, PM25] Data not available.
19:50:54:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:445 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:445 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:465 -> [UART, PM25] Reading data...
19:50:54:466 -> [UART, PM25] Data not available.
19:50:54:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:466 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:466 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:486 -> [UART, PM25] Reading data...
19:50:54:487 -> [UART, PM25] Data not available.
19:50:54:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:487 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:487 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:507 -> [UART, PM25] Reading data...
19:50:54:508 -> [UART, PM25] Data not available.
19:50:54:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:508 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:508 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:529 -> [UART, PM25] Reading data...
19:50:54:529 -> [UART, PM25] Data not available.
19:50:54:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:529 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:529 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:550 -> [UART, PM25] Reading data...
19:50:54:550 -> [UART, PM25] Data not available.
19:50:54:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:550 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:550 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:571 -> [UART, PM25] Reading data...
19:50:54:571 -> [UART, PM25] Data not available.
19:50:54:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:571 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:571 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:591 -> [UART, PM25] Reading data...
19:50:54:592 -> [UART, PM25] Data not available.
19:50:54:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:592 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:592 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:613 -> [UART, PM25] Reading data...
19:50:54:613 -> [UART, PM25] Data not available.
19:50:54:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:613 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:613 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:634 -> [UART, PM25] Reading data...
19:50:54:634 -> [UART, PM25] Data not available.
19:50:54:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:634 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:634 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:655 -> [UART, PM25] Reading data...
19:50:54:655 -> [UART, PM25] Data not available.
19:50:54:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:655 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:655 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:675 -> [UART, PM25] Reading data...
19:50:54:676 -> [UART, PM25] Data not available.
19:50:54:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:676 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:676 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:696 -> [UART, PM25] Reading data...
19:50:54:697 -> [UART, PM25] Data not available.
19:50:54:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:697 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:697 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:717 -> [UART, PM25] Reading data...
19:50:54:718 -> [UART, PM25] Data not available.
19:50:54:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:718 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:718 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:747 -> [UART, PM25] Reading data...
19:50:54:747 -> [UART, PM25] Data not available.
19:50:54:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:747 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:747 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:760 -> [UART, PM25] Reading data...
19:50:54:760 -> [UART, PM25] Data not available.
19:50:54:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:760 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:760 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:780 -> [UART, PM25] Reading data...
19:50:54:781 -> [UART, PM25] Data not available.
19:50:54:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:781 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:781 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:801 -> [UART, PM25] Reading data...
19:50:54:802 -> [UART, PM25] Data not available.
19:50:54:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:802 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:802 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:822 -> [UART, PM25] Reading data...
19:50:54:823 -> [UART, PM25] Data not available.
19:50:54:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:823 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:823 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:843 -> [UART, PM25] Reading data...
19:50:54:844 -> [UART, PM25] Data not available.
19:50:54:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:844 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:844 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:865 -> [UART, PM25] Reading data...
19:50:54:866 -> [UART, PM25] Data not available.
19:50:54:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:866 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:866 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:886 -> [UART, PM25] Reading data...
19:50:54:886 -> [UART, PM25] Data not available.
19:50:54:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:886 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:886 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:906 -> [UART, PM25] Reading data...
19:50:54:907 -> [UART, PM25] Data not available.
19:50:54:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:907 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:907 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:927 -> [UART, PM25] Reading data...
19:50:54:928 -> [UART, PM25] Data not available.
19:50:54:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:928 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:928 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:949 -> [UART, PM25] Reading data...
19:50:54:949 -> [UART, PM25] Data not available.
19:50:54:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:949 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:949 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:970 -> [UART, PM25] Reading data...
19:50:54:970 -> [UART, PM25] Data not available.
19:50:54:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:970 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:970 -> [UART, PM25] Uart available, resetting event queue..
19:50:54:990 -> [UART, PM25] Reading data...
19:50:54:990 -> [UART, PM25] Data not available.
19:50:54:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:54:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:54:991 -> [UART, PM25] Uart available, clearing write errors..
19:50:54:991 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:011 -> [UART, PM25] Reading data...
19:50:55:012 -> [UART, PM25] Data not available.
19:50:55:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:012 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:012 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:032 -> [UART, PM25] Reading data...
19:50:55:033 -> [UART, PM25] Data not available.
19:50:55:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:033 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:033 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:053 -> [UART, PM25] Reading data...
19:50:55:054 -> [UART, PM25] Data not available.
19:50:55:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:054 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:054 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:075 -> [UART, PM25] Reading data...
19:50:55:075 -> [UART, PM25] Data not available.
19:50:55:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:075 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:075 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:095 -> [UART, PM25] Reading data...
19:50:55:096 -> [UART, PM25] Data not available.
19:50:55:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:096 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:096 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:116 -> [UART, PM25] Reading data...
19:50:55:117 -> [UART, PM25] Data not available.
19:50:55:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:117 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:117 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:138 -> [UART, PM25] Reading data...
19:50:55:138 -> [UART, PM25] Data not available.
19:50:55:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:138 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:138 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:159 -> [UART, PM25] Reading data...
19:50:55:159 -> [UART, PM25] Data not available.
19:50:55:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:159 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:159 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:180 -> [UART, PM25] Reading data...
19:50:55:180 -> [UART, PM25] Data not available.
19:50:55:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:180 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:180 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:200 -> [UART, PM25] Reading data...
19:50:55:201 -> [UART, PM25] Data not available.
19:50:55:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:201 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:201 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:221 -> [UART, PM25] Reading data...
19:50:55:222 -> [UART, PM25] Data not available.
19:50:55:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:222 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:222 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:242 -> [UART, PM25] Reading data...
19:50:55:243 -> [UART, PM25] Data not available.
19:50:55:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:243 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:243 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:264 -> [UART, PM25] Reading data...
19:50:55:264 -> [UART, PM25] Data not available.
19:50:55:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:264 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:264 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:284 -> [UART, PM25] Reading data...
19:50:55:285 -> [UART, PM25] Data not available.
19:50:55:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:285 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:285 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:305 -> [UART, PM25] Reading data...
19:50:55:306 -> [UART, PM25] Data not available.
19:50:55:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:306 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:306 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:327 -> [UART, PM25] Reading data...
19:50:55:327 -> [UART, PM25] Data not available.
19:50:55:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:327 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:327 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:347 -> [UART, PM25] Reading data...
19:50:55:348 -> [UART, PM25] Data not available.
19:50:55:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:348 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:348 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:369 -> [UART, PM25] Reading data...
19:50:55:369 -> [UART, PM25] Data not available.
19:50:55:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:369 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:369 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:389 -> [UART, PM25] Reading data...
19:50:55:390 -> [UART, PM25] Data not available.
19:50:55:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:390 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:390 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:410 -> [UART, PM25] Reading data...
19:50:55:411 -> [UART, PM25] Data not available.
19:50:55:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:411 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:411 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:431 -> [UART, PM25] Reading data...
19:50:55:432 -> [UART, PM25] Data not available.
19:50:55:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:432 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:432 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:453 -> [UART, PM25] Reading data...
19:50:55:453 -> [UART, PM25] Data not available.
19:50:55:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:453 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:453 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:474 -> [UART, PM25] Reading data...
19:50:55:474 -> [UART, PM25] Data not available.
19:50:55:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:474 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:474 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:494 -> [UART, PM25] Reading data...
19:50:55:495 -> [UART, PM25] Data not available.
19:50:55:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:495 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:495 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:515 -> [UART, PM25] Reading data...
19:50:55:516 -> [UART, PM25] Data not available.
19:50:55:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:516 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:516 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:536 -> [UART, PM25] Reading data...
19:50:55:537 -> [UART, PM25] Data not available.
19:50:55:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:537 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:537 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:557 -> [UART, PM25] Reading data...
19:50:55:558 -> [UART, PM25] Data not available.
19:50:55:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:558 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:558 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:579 -> [UART, PM25] Reading data...
19:50:55:579 -> [UART, PM25] Data not available.
19:50:55:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:579 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:579 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:579 -> PING!
19:50:55:803 -> [UART, PM25] Reading data...
19:50:55:803 -> [UART, PM25] Data not available.
19:50:55:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:803 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:803 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:824 -> [UART, PM25] Reading data...
19:50:55:824 -> [UART, PM25] Data not available.
19:50:55:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:824 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:824 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:845 -> [UART, PM25] Reading data...
19:50:55:845 -> [UART, PM25] Data not available.
19:50:55:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:845 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:845 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:865 -> [UART, PM25] Reading data...
19:50:55:866 -> [UART, PM25] Data not available.
19:50:55:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:866 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:866 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:886 -> [UART, PM25] Reading data...
19:50:55:887 -> [UART, PM25] Data not available.
19:50:55:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:887 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:887 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:908 -> [UART, PM25] Reading data...
19:50:55:908 -> [UART, PM25] Data not available.
19:50:55:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:908 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:908 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:928 -> [UART, PM25] Reading data...
19:50:55:929 -> [UART, PM25] Data not available.
19:50:55:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:929 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:929 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:949 -> [UART, PM25] Reading data...
19:50:55:950 -> [UART, PM25] Data not available.
19:50:55:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:950 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:950 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:971 -> [UART, PM25] Reading data...
19:50:55:971 -> [UART, PM25] Data not available.
19:50:55:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:971 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:971 -> [UART, PM25] Uart available, resetting event queue..
19:50:55:992 -> [UART, PM25] Reading data...
19:50:55:992 -> [UART, PM25] Data not available.
19:50:55:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:55:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:55:992 -> [UART, PM25] Uart available, clearing write errors..
19:50:55:992 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:012 -> [UART, PM25] Reading data...
19:50:56:013 -> [UART, PM25] Data not available.
19:50:56:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:013 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:013 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:033 -> [UART, PM25] Reading data...
19:50:56:034 -> [UART, PM25] Data not available.
19:50:56:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:034 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:034 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:055 -> [UART, PM25] Reading data...
19:50:56:055 -> [UART, PM25] Data not available.
19:50:56:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:055 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:055 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:075 -> [UART, PM25] Reading data...
19:50:56:076 -> [UART, PM25] Data not available.
19:50:56:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:076 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:076 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:097 -> [UART, PM25] Reading data...
19:50:56:097 -> [UART, PM25] Data not available.
19:50:56:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:097 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:097 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:118 -> [UART, PM25] Reading data...
19:50:56:118 -> [UART, PM25] Data not available.
19:50:56:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:118 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:118 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:138 -> [UART, PM25] Reading data...
19:50:56:139 -> [UART, PM25] Data not available.
19:50:56:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:139 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:139 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:159 -> [UART, PM25] Reading data...
19:50:56:160 -> [UART, PM25] Data not available.
19:50:56:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:160 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:160 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:198 -> [UART, PM25] Reading data...
19:50:56:202 -> [UART, PM25] Data not available.
19:50:56:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:202 -> [UART, PM25] Reading data...
19:50:56:202 -> [UART, PM25] Data not available.
19:50:56:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:202 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:202 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:222 -> [UART, PM25] Reading data...
19:50:56:223 -> [UART, PM25] Data not available.
19:50:56:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:223 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:223 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:243 -> [UART, PM25] Reading data...
19:50:56:244 -> [UART, PM25] Data not available.
19:50:56:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:244 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:244 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:264 -> [UART, PM25] Reading data...
19:50:56:265 -> [UART, PM25] Data not available.
19:50:56:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:265 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:265 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:286 -> [UART, PM25] Reading data...
19:50:56:287 -> [UART, PM25] Data not available.
19:50:56:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:287 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:287 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:306 -> [UART, PM25] Reading data...
19:50:56:307 -> [UART, PM25] Data not available.
19:50:56:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:307 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:307 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:327 -> [UART, PM25] Reading data...
19:50:56:328 -> [UART, PM25] Data not available.
19:50:56:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:328 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:328 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:348 -> [UART, PM25] Reading data...
19:50:56:349 -> [UART, PM25] Data not available.
19:50:56:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:349 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:349 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:369 -> [UART, PM25] Reading data...
19:50:56:370 -> [UART, PM25] Data not available.
19:50:56:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:370 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:370 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:390 -> [UART, PM25] Reading data...
19:50:56:391 -> [UART, PM25] Data not available.
19:50:56:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:391 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:391 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:411 -> [UART, PM25] Reading data...
19:50:56:412 -> [UART, PM25] Data not available.
19:50:56:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:412 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:412 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:432 -> [UART, PM25] Reading data...
19:50:56:433 -> [UART, PM25] Data not available.
19:50:56:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:433 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:433 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:453 -> [UART, PM25] Reading data...
19:50:56:454 -> [UART, PM25] Data not available.
19:50:56:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:454 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:454 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:474 -> [UART, PM25] Reading data...
19:50:56:475 -> [UART, PM25] Data not available.
19:50:56:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:475 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:475 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:495 -> [UART, PM25] Reading data...
19:50:56:496 -> [UART, PM25] Data not available.
19:50:56:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:496 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:496 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:516 -> [UART, PM25] Reading data...
19:50:56:517 -> [UART, PM25] Data not available.
19:50:56:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:517 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:517 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:537 -> [UART, PM25] Reading data...
19:50:56:538 -> [UART, PM25] Data not available.
19:50:56:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:538 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:538 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:558 -> [UART, PM25] Reading data...
19:50:56:559 -> [UART, PM25] Data not available.
19:50:56:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:559 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:559 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:579 -> [UART, PM25] Reading data...
19:50:56:580 -> [UART, PM25] Data not available.
19:50:56:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:580 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:580 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:601 -> [UART, PM25] Reading data...
19:50:56:601 -> [UART, PM25] Data not available.
19:50:56:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:601 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:601 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:621 -> [UART, PM25] Reading data...
19:50:56:621 -> [UART, PM25] Data not available.
19:50:56:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:622 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:622 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:642 -> [UART, PM25] Reading data...
19:50:56:643 -> [UART, PM25] Data not available.
19:50:56:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:643 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:643 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:663 -> [UART, PM25] Reading data...
19:50:56:664 -> [UART, PM25] Data not available.
19:50:56:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:664 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:664 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:684 -> [UART, PM25] Reading data...
19:50:56:685 -> [UART, PM25] Data not available.
19:50:56:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:685 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:685 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:705 -> [UART, PM25] Reading data...
19:50:56:706 -> [UART, PM25] Data not available.
19:50:56:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:706 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:706 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:726 -> [UART, PM25] Reading data...
19:50:56:727 -> [UART, PM25] Data not available.
19:50:56:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:727 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:727 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:747 -> [UART, PM25] Reading data...
19:50:56:748 -> [UART, PM25] Data not available.
19:50:56:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:748 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:748 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:769 -> [UART, PM25] Reading data...
19:50:56:769 -> [UART, PM25] Data not available.
19:50:56:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:769 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:769 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:790 -> [UART, PM25] Reading data...
19:50:56:790 -> [UART, PM25] Data not available.
19:50:56:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:790 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:790 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:813 -> [UART, PM25] Reading data...
19:50:56:814 -> [UART, PM25] Data not available.
19:50:56:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:814 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:814 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:831 -> [UART, PM25] Reading data...
19:50:56:832 -> [UART, PM25] Data not available.
19:50:56:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:832 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:832 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:852 -> [UART, PM25] Reading data...
19:50:56:853 -> [UART, PM25] Data not available.
19:50:56:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:853 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:853 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:873 -> [UART, PM25] Reading data...
19:50:56:874 -> [UART, PM25] Data not available.
19:50:56:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:874 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:874 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:895 -> [UART, PM25] Reading data...
19:50:56:895 -> [UART, PM25] Data not available.
19:50:56:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:895 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:895 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:916 -> [UART, PM25] Reading data...
19:50:56:916 -> [UART, PM25] Data not available.
19:50:56:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:916 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:916 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:936 -> [UART, PM25] Reading data...
19:50:56:937 -> [UART, PM25] Data not available.
19:50:56:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:937 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:937 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:957 -> [UART, PM25] Reading data...
19:50:56:958 -> [UART, PM25] Data not available.
19:50:56:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:958 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:958 -> [UART, PM25] Uart available, resetting event queue..
19:50:56:978 -> [UART, PM25] Reading data...
19:50:56:979 -> [UART, PM25] Data not available.
19:50:56:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:56:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:56:979 -> [UART, PM25] Uart available, clearing write errors..
19:50:56:979 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:000 -> [UART, PM25] Reading data...
19:50:57:000 -> [UART, PM25] Data not available.
19:50:57:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:000 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:000 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:021 -> [UART, PM25] Reading data...
19:50:57:021 -> [UART, PM25] Data not available.
19:50:57:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:021 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:021 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:041 -> [UART, PM25] Reading data...
19:50:57:041 -> [UART, PM25] Data not available.
19:50:57:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:042 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:042 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:062 -> [UART, PM25] Reading data...
19:50:57:063 -> [UART, PM25] Data not available.
19:50:57:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:063 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:063 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:083 -> [UART, PM25] Reading data...
19:50:57:084 -> [UART, PM25] Data not available.
19:50:57:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:084 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:084 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:105 -> [UART, PM25] Reading data...
19:50:57:105 -> [UART, PM25] Data not available.
19:50:57:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:105 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:105 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:125 -> [UART, PM25] Reading data...
19:50:57:126 -> [UART, PM25] Data not available.
19:50:57:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:126 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:126 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:146 -> [UART, PM25] Reading data...
19:50:57:147 -> [UART, PM25] Data not available.
19:50:57:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:147 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:147 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:168 -> [UART, PM25] Reading data...
19:50:57:168 -> [UART, PM25] Data not available.
19:50:57:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:168 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:168 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:188 -> [UART, PM25] Reading data...
19:50:57:189 -> [UART, PM25] Data not available.
19:50:57:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:189 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:189 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:210 -> [UART, PM25] Reading data...
19:50:57:210 -> [UART, PM25] Data not available.
19:50:57:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:210 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:210 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:231 -> [UART, PM25] Reading data...
19:50:57:231 -> [UART, PM25] Data not available.
19:50:57:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:231 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:231 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:252 -> [UART, PM25] Reading data...
19:50:57:252 -> [UART, PM25] Data not available.
19:50:57:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:252 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:252 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:273 -> [UART, PM25] Reading data...
19:50:57:273 -> [UART, PM25] Data not available.
19:50:57:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:273 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:273 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:293 -> [UART, PM25] Reading data...
19:50:57:294 -> [UART, PM25] Data not available.
19:50:57:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:294 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:294 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:324 -> [UART, PM25] Reading data...
19:50:57:325 -> [UART, PM25] Data not available.
19:50:57:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:325 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:325 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:335 -> [UART, PM25] Reading data...
19:50:57:336 -> [UART, PM25] Data not available.
19:50:57:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:336 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:336 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:356 -> [UART, PM25] Reading data...
19:50:57:357 -> [UART, PM25] Data not available.
19:50:57:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:357 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:357 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:377 -> [UART, PM25] Reading data...
19:50:57:378 -> [UART, PM25] Data not available.
19:50:57:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:378 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:378 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:398 -> [UART, PM25] Reading data...
19:50:57:399 -> [UART, PM25] Data not available.
19:50:57:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:399 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:399 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:420 -> [UART, PM25] Reading data...
19:50:57:420 -> [UART, PM25] Data not available.
19:50:57:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:420 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:420 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:440 -> [UART, PM25] Reading data...
19:50:57:441 -> [UART, PM25] Data not available.
19:50:57:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:441 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:441 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:461 -> [UART, PM25] Reading data...
19:50:57:462 -> [UART, PM25] Data not available.
19:50:57:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:462 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:462 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:482 -> [UART, PM25] Reading data...
19:50:57:483 -> [UART, PM25] Data not available.
19:50:57:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:483 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:483 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:503 -> [UART, PM25] Reading data...
19:50:57:503 -> [UART, PM25] Data not available.
19:50:57:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:504 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:504 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:525 -> [UART, PM25] Reading data...
19:50:57:525 -> [UART, PM25] Data not available.
19:50:57:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:525 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:525 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:545 -> [UART, PM25] Reading data...
19:50:57:546 -> [UART, PM25] Data not available.
19:50:57:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:546 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:546 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:566 -> [UART, PM25] Reading data...
19:50:57:567 -> [UART, PM25] Data not available.
19:50:57:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:567 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:567 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:588 -> [UART, PM25] Reading data...
19:50:57:588 -> [UART, PM25] Data not available.
19:50:57:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:588 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:588 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:609 -> [UART, PM25] Reading data...
19:50:57:609 -> [UART, PM25] Data not available.
19:50:57:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:609 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:609 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:629 -> [UART, PM25] Reading data...
19:50:57:630 -> [UART, PM25] Data not available.
19:50:57:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:630 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:630 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:652 -> [UART, PM25] Reading data...
19:50:57:653 -> [UART, PM25] Data not available.
19:50:57:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:653 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:653 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:671 -> [UART, PM25] Reading data...
19:50:57:672 -> [UART, PM25] Data not available.
19:50:57:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:672 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:672 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:692 -> [UART, PM25] Reading data...
19:50:57:693 -> [UART, PM25] Data not available.
19:50:57:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:693 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:693 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:713 -> [UART, PM25] Reading data...
19:50:57:714 -> [UART, PM25] Data not available.
19:50:57:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:714 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:714 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:734 -> [UART, PM25] Reading data...
19:50:57:735 -> [UART, PM25] Data not available.
19:50:57:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:735 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:735 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:755 -> [UART, PM25] Reading data...
19:50:57:756 -> [UART, PM25] Data not available.
19:50:57:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:756 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:756 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:776 -> [UART, PM25] Reading data...
19:50:57:777 -> [UART, PM25] Data not available.
19:50:57:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:777 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:777 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:797 -> [UART, PM25] Reading data...
19:50:57:798 -> [UART, PM25] Data not available.
19:50:57:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:798 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:798 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:819 -> [UART, PM25] Reading data...
19:50:57:819 -> [UART, PM25] Data not available.
19:50:57:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:819 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:819 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:847 -> [UART, PM25] Reading data...
19:50:57:847 -> [UART, PM25] Data not available.
19:50:57:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:847 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:847 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:861 -> [UART, PM25] Reading data...
19:50:57:861 -> [UART, PM25] Data not available.
19:50:57:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:861 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:861 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:881 -> [UART, PM25] Reading data...
19:50:57:882 -> [UART, PM25] Data not available.
19:50:57:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:882 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:882 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:919 -> [UART, PM25] Reading data...
19:50:57:940 -> [UART, PM25] Data not available.
19:50:57:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:940 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:940 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:940 -> [UART, PM25] Reading data...
19:50:57:940 -> [UART, PM25] Data not available.
19:50:57:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:940 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:940 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:944 -> [UART, PM25] Reading data...
19:50:57:944 -> [UART, PM25] Data not available.
19:50:57:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:945 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:945 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:965 -> [UART, PM25] Reading data...
19:50:57:966 -> [UART, PM25] Data not available.
19:50:57:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:966 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:966 -> [UART, PM25] Uart available, resetting event queue..
19:50:57:986 -> [UART, PM25] Reading data...
19:50:57:992 -> [UART, PM25] Data not available.
19:50:57:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:57:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:57:992 -> [UART, PM25] Uart available, clearing write errors..
19:50:57:992 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:007 -> [UART, PM25] Reading data...
19:50:58:008 -> [UART, PM25] Data not available.
19:50:58:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:008 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:008 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:028 -> [UART, PM25] Reading data...
19:50:58:029 -> [UART, PM25] Data not available.
19:50:58:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:029 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:029 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:049 -> [UART, PM25] Reading data...
19:50:58:050 -> [UART, PM25] Data not available.
19:50:58:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:050 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:050 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:070 -> [UART, PM25] Reading data...
19:50:58:071 -> [UART, PM25] Data not available.
19:50:58:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:071 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:071 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:091 -> [UART, PM25] Reading data...
19:50:58:092 -> [UART, PM25] Data not available.
19:50:58:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:092 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:092 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:112 -> [UART, PM25] Reading data...
19:50:58:113 -> [UART, PM25] Data not available.
19:50:58:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:113 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:113 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:133 -> [UART, PM25] Reading data...
19:50:58:134 -> [UART, PM25] Data not available.
19:50:58:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:134 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:134 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:154 -> [UART, PM25] Reading data...
19:50:58:155 -> [UART, PM25] Data not available.
19:50:58:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:155 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:155 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:175 -> [UART, PM25] Reading data...
19:50:58:176 -> [UART, PM25] Data not available.
19:50:58:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:176 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:176 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:196 -> [UART, PM25] Reading data...
19:50:58:197 -> [UART, PM25] Data not available.
19:50:58:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:197 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:197 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:217 -> [UART, PM25] Reading data...
19:50:58:218 -> [UART, PM25] Data not available.
19:50:58:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:218 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:218 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:239 -> [UART, PM25] Reading data...
19:50:58:239 -> [UART, PM25] Data not available.
19:50:58:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:239 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:239 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:259 -> [UART, PM25] Reading data...
19:50:58:260 -> [UART, PM25] Data not available.
19:50:58:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:260 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:260 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:280 -> [UART, PM25] Reading data...
19:50:58:281 -> [UART, PM25] Data not available.
19:50:58:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:281 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:281 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:302 -> [UART, PM25] Reading data...
19:50:58:302 -> [UART, PM25] Data not available.
19:50:58:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:302 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:302 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:322 -> [UART, PM25] Reading data...
19:50:58:323 -> [UART, PM25] Data not available.
19:50:58:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:323 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:323 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:344 -> [UART, PM25] Reading data...
19:50:58:344 -> [UART, PM25] Data not available.
19:50:58:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:344 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:344 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:364 -> [UART, PM25] Reading data...
19:50:58:365 -> [UART, PM25] Data not available.
19:50:58:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:365 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:365 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:385 -> [UART, PM25] Reading data...
19:50:58:386 -> [UART, PM25] Data not available.
19:50:58:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:386 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:386 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:406 -> [UART, PM25] Reading data...
19:50:58:408 -> [UART, PM25] Data not available.
19:50:58:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:408 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:408 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:427 -> [UART, PM25] Reading data...
19:50:58:428 -> [UART, PM25] Data not available.
19:50:58:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:428 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:428 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:449 -> [UART, PM25] Reading data...
19:50:58:449 -> [UART, PM25] Data not available.
19:50:58:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:449 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:449 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:470 -> [UART, PM25] Reading data...
19:50:58:470 -> [UART, PM25] Data not available.
19:50:58:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:470 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:470 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:490 -> [UART, PM25] Reading data...
19:50:58:491 -> [UART, PM25] Data not available.
19:50:58:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:491 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:491 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:512 -> [UART, PM25] Reading data...
19:50:58:512 -> [UART, PM25] Data not available.
19:50:58:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:512 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:512 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:533 -> [UART, PM25] Reading data...
19:50:58:533 -> [UART, PM25] Data not available.
19:50:58:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:533 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:533 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:553 -> [UART, PM25] Reading data...
19:50:58:554 -> [UART, PM25] Data not available.
19:50:58:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:554 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:554 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:574 -> [UART, PM25] Reading data...
19:50:58:575 -> [UART, PM25] Data not available.
19:50:58:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:575 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:575 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:595 -> [UART, PM25] Reading data...
19:50:58:596 -> [UART, PM25] Data not available.
19:50:58:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:596 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:596 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:616 -> [UART, PM25] Reading data...
19:50:58:617 -> [UART, PM25] Data not available.
19:50:58:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:617 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:617 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:637 -> [UART, PM25] Reading data...
19:50:58:638 -> [UART, PM25] Data not available.
19:50:58:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:638 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:638 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:658 -> [UART, PM25] Reading data...
19:50:58:659 -> [UART, PM25] Data not available.
19:50:58:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:659 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:659 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:679 -> [UART, PM25] Reading data...
19:50:58:680 -> [UART, PM25] Data not available.
19:50:58:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:680 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:680 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:700 -> [UART, PM25] Reading data...
19:50:58:701 -> [UART, PM25] Data not available.
19:50:58:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:701 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:701 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:722 -> [UART, PM25] Reading data...
19:50:58:722 -> [UART, PM25] Data not available.
19:50:58:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:722 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:722 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:743 -> [UART, PM25] Reading data...
19:50:58:744 -> [UART, PM25] Data not available.
19:50:58:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:744 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:744 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:763 -> [UART, PM25] Reading data...
19:50:58:764 -> [UART, PM25] Data not available.
19:50:58:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:764 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:764 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:785 -> [UART, PM25] Reading data...
19:50:58:785 -> [UART, PM25] Data not available.
19:50:58:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:785 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:785 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:805 -> [UART, PM25] Reading data...
19:50:58:806 -> [UART, PM25] Data not available.
19:50:58:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:806 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:806 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:826 -> [UART, PM25] Reading data...
19:50:58:827 -> [UART, PM25] Data not available.
19:50:58:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:827 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:827 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:848 -> [UART, PM25] Reading data...
19:50:58:848 -> [UART, PM25] Data not available.
19:50:58:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:848 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:848 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:879 -> [UART, PM25] Reading data...
19:50:58:879 -> [UART, PM25] Data not available.
19:50:58:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:879 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:879 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:889 -> [UART, PM25] Reading data...
19:50:58:890 -> [UART, PM25] Data not available.
19:50:58:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:890 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:890 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:910 -> [UART, PM25] Reading data...
19:50:58:911 -> [UART, PM25] Data not available.
19:50:58:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:911 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:911 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:932 -> [UART, PM25] Reading data...
19:50:58:932 -> [UART, PM25] Data not available.
19:50:58:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:932 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:932 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:952 -> [UART, PM25] Reading data...
19:50:58:953 -> [UART, PM25] Data not available.
19:50:58:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:953 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:953 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:973 -> [UART, PM25] Reading data...
19:50:58:974 -> [UART, PM25] Data not available.
19:50:58:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:974 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:974 -> [UART, PM25] Uart available, resetting event queue..
19:50:58:994 -> [UART, PM25] Reading data...
19:50:58:995 -> [UART, PM25] Data not available.
19:50:58:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:58:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:58:995 -> [UART, PM25] Uart available, clearing write errors..
19:50:58:995 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:015 -> [UART, PM25] Reading data...
19:50:59:016 -> [UART, PM25] Data not available.
19:50:59:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:016 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:016 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:036 -> [UART, PM25] Reading data...
19:50:59:037 -> [UART, PM25] Data not available.
19:50:59:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:037 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:037 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:058 -> [UART, PM25] Reading data...
19:50:59:058 -> [UART, PM25] Data not available.
19:50:59:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:058 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:058 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:078 -> [UART, PM25] Reading data...
19:50:59:079 -> [UART, PM25] Data not available.
19:50:59:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:079 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:079 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:099 -> [UART, PM25] Reading data...
19:50:59:100 -> [UART, PM25] Data not available.
19:50:59:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:100 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:100 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:121 -> [UART, PM25] Reading data...
19:50:59:121 -> [UART, PM25] Data not available.
19:50:59:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:121 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:121 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:141 -> [UART, PM25] Reading data...
19:50:59:142 -> [UART, PM25] Data not available.
19:50:59:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:142 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:142 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:163 -> [UART, PM25] Reading data...
19:50:59:163 -> [UART, PM25] Data not available.
19:50:59:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:163 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:163 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:184 -> [UART, PM25] Reading data...
19:50:59:184 -> [UART, PM25] Data not available.
19:50:59:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:184 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:184 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:204 -> [UART, PM25] Reading data...
19:50:59:205 -> [UART, PM25] Data not available.
19:50:59:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:205 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:205 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:225 -> [UART, PM25] Reading data...
19:50:59:226 -> [UART, PM25] Data not available.
19:50:59:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:226 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:226 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:246 -> [UART, PM25] Reading data...
19:50:59:248 -> [UART, PM25] Data not available.
19:50:59:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:248 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:248 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:268 -> [UART, PM25] Reading data...
19:50:59:268 -> [UART, PM25] Data not available.
19:50:59:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:268 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:268 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:288 -> [UART, PM25] Reading data...
19:50:59:289 -> [UART, PM25] Data not available.
19:50:59:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:289 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:289 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:309 -> [UART, PM25] Reading data...
19:50:59:310 -> [UART, PM25] Data not available.
19:50:59:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:310 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:310 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:330 -> [UART, PM25] Reading data...
19:50:59:331 -> [UART, PM25] Data not available.
19:50:59:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:331 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:331 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:352 -> [UART, PM25] Reading data...
19:50:59:352 -> [UART, PM25] Data not available.
19:50:59:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:352 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:352 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:373 -> [UART, PM25] Reading data...
19:50:59:373 -> [UART, PM25] Data not available.
19:50:59:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:373 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:373 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:404 -> [UART, PM25] Reading data...
19:50:59:405 -> [UART, PM25] Data not available.
19:50:59:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:405 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:405 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:415 -> [UART, PM25] Reading data...
19:50:59:415 -> [UART, PM25] Data not available.
19:50:59:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:415 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:415 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:436 -> [UART, PM25] Reading data...
19:50:59:436 -> [UART, PM25] Data not available.
19:50:59:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:436 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:436 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:457 -> [UART, PM25] Reading data...
19:50:59:457 -> [UART, PM25] Data not available.
19:50:59:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:457 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:457 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:478 -> [UART, PM25] Reading data...
19:50:59:478 -> [UART, PM25] Data not available.
19:50:59:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:478 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:478 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:498 -> [UART, PM25] Reading data...
19:50:59:499 -> [UART, PM25] Data not available.
19:50:59:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:499 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:499 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:519 -> [UART, PM25] Reading data...
19:50:59:520 -> [UART, PM25] Data not available.
19:50:59:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:520 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:520 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:540 -> [UART, PM25] Reading data...
19:50:59:541 -> [UART, PM25] Data not available.
19:50:59:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:541 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:541 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:585 -> [UART, PM25] Reading data...
19:50:59:597 -> [UART, PM25] Data not available.
19:50:59:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:597 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:597 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:597 -> [UART, PM25] Reading data...
19:50:59:597 -> [UART, PM25] Data not available.
19:50:59:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:597 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:597 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:603 -> [UART, PM25] Reading data...
19:50:59:604 -> [UART, PM25] Data not available.
19:50:59:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:604 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:604 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:624 -> [UART, PM25] Reading data...
19:50:59:625 -> [UART, PM25] Data not available.
19:50:59:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:625 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:625 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:645 -> [UART, PM25] Reading data...
19:50:59:646 -> [UART, PM25] Data not available.
19:50:59:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:646 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:646 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:666 -> [UART, PM25] Reading data...
19:50:59:667 -> [UART, PM25] Data not available.
19:50:59:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:667 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:667 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:687 -> [UART, PM25] Reading data...
19:50:59:688 -> [UART, PM25] Data not available.
19:50:59:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:688 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:688 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:708 -> [UART, PM25] Reading data...
19:50:59:709 -> [UART, PM25] Data not available.
19:50:59:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:709 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:709 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:729 -> [UART, PM25] Reading data...
19:50:59:730 -> [UART, PM25] Data not available.
19:50:59:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:730 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:730 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:750 -> [UART, PM25] Reading data...
19:50:59:751 -> [UART, PM25] Data not available.
19:50:59:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:751 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:751 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:771 -> [UART, PM25] Reading data...
19:50:59:772 -> [UART, PM25] Data not available.
19:50:59:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:772 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:772 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:792 -> [UART, PM25] Reading data...
19:50:59:793 -> [UART, PM25] Data not available.
19:50:59:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:793 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:793 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:813 -> [UART, PM25] Reading data...
19:50:59:814 -> [UART, PM25] Data not available.
19:50:59:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:814 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:814 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:834 -> [UART, PM25] Reading data...
19:50:59:835 -> [UART, PM25] Data not available.
19:50:59:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:835 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:835 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:856 -> [UART, PM25] Reading data...
19:50:59:856 -> [UART, PM25] Data not available.
19:50:59:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:856 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:856 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:877 -> [UART, PM25] Reading data...
19:50:59:877 -> [UART, PM25] Data not available.
19:50:59:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:877 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:877 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:897 -> [UART, PM25] Reading data...
19:50:59:898 -> [UART, PM25] Data not available.
19:50:59:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:898 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:898 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:922 -> [UART, PM25] Reading data...
19:50:59:923 -> [UART, PM25] Data not available.
19:50:59:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:923 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:923 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:939 -> [UART, PM25] Reading data...
19:50:59:940 -> [UART, PM25] Data not available.
19:50:59:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:940 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:940 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:960 -> [UART, PM25] Reading data...
19:50:59:961 -> [UART, PM25] Data not available.
19:50:59:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:961 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:961 -> [UART, PM25] Uart available, resetting event queue..
19:50:59:982 -> [UART, PM25] Reading data...
19:50:59:982 -> [UART, PM25] Data not available.
19:50:59:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:50:59:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:50:59:982 -> [UART, PM25] Uart available, clearing write errors..
19:50:59:982 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:003 -> [UART, PM25] Reading data...
19:51:00:003 -> [UART, PM25] Data not available.
19:51:00:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:003 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:003 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:023 -> [UART, PM25] Reading data...
19:51:00:024 -> [UART, PM25] Data not available.
19:51:00:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:024 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:024 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:047 -> [UART, PM25] Reading data...
19:51:00:049 -> [UART, PM25] Data not available.
19:51:00:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:049 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:049 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:065 -> [UART, PM25] Reading data...
19:51:00:066 -> [UART, PM25] Data not available.
19:51:00:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:066 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:066 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:086 -> [UART, PM25] Reading data...
19:51:00:087 -> [UART, PM25] Data not available.
19:51:00:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:087 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:087 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:108 -> [UART, PM25] Reading data...
19:51:00:108 -> [UART, PM25] Data not available.
19:51:00:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:108 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:108 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:128 -> [UART, PM25] Reading data...
19:51:00:129 -> [UART, PM25] Data not available.
19:51:00:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:129 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:129 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:149 -> [UART, PM25] Reading data...
19:51:00:150 -> [UART, PM25] Data not available.
19:51:00:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:150 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:150 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:170 -> [UART, PM25] Reading data...
19:51:00:171 -> [UART, PM25] Data not available.
19:51:00:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:171 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:171 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:191 -> [UART, PM25] Reading data...
19:51:00:192 -> [UART, PM25] Data not available.
19:51:00:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:192 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:192 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:212 -> [UART, PM25] Reading data...
19:51:00:213 -> [UART, PM25] Data not available.
19:51:00:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:213 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:213 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:233 -> [UART, PM25] Reading data...
19:51:00:234 -> [UART, PM25] Data not available.
19:51:00:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:234 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:234 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:255 -> [UART, PM25] Reading data...
19:51:00:255 -> [UART, PM25] Data not available.
19:51:00:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:255 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:255 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:275 -> [UART, PM25] Reading data...
19:51:00:276 -> [UART, PM25] Data not available.
19:51:00:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:276 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:276 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:296 -> [UART, PM25] Reading data...
19:51:00:297 -> [UART, PM25] Data not available.
19:51:00:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:297 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:297 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:297 -> PING!
19:51:00:511 -> [UART, PM25] Reading data...
19:51:00:511 -> [UART, PM25] Data not available.
19:51:00:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:511 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:511 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:531 -> [UART, PM25] Reading data...
19:51:00:532 -> [UART, PM25] Data not available.
19:51:00:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:532 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:532 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:553 -> [UART, PM25] Reading data...
19:51:00:553 -> [UART, PM25] Data not available.
19:51:00:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:553 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:553 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:573 -> [UART, PM25] Reading data...
19:51:00:574 -> [UART, PM25] Data not available.
19:51:00:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:574 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:574 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:595 -> [UART, PM25] Reading data...
19:51:00:595 -> [UART, PM25] Data not available.
19:51:00:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:595 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:595 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:615 -> [UART, PM25] Reading data...
19:51:00:616 -> [UART, PM25] Data not available.
19:51:00:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:616 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:616 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:636 -> [UART, PM25] Reading data...
19:51:00:637 -> [UART, PM25] Data not available.
19:51:00:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:637 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:637 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:658 -> [UART, PM25] Reading data...
19:51:00:658 -> [UART, PM25] Data not available.
19:51:00:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:679 -> [UART, PM25] Reading data...
19:51:00:680 -> [UART, PM25] Data not available.
19:51:00:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:680 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:680 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:700 -> [UART, PM25] Reading data...
19:51:00:701 -> [UART, PM25] Data not available.
19:51:00:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:701 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:701 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:720 -> [UART, PM25] Reading data...
19:51:00:721 -> [UART, PM25] Data not available.
19:51:00:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:721 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:721 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:741 -> [UART, PM25] Reading data...
19:51:00:742 -> [UART, PM25] Data not available.
19:51:00:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:742 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:742 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:762 -> [UART, PM25] Reading data...
19:51:00:763 -> [UART, PM25] Data not available.
19:51:00:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:763 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:763 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:784 -> [UART, PM25] Reading data...
19:51:00:784 -> [UART, PM25] Data not available.
19:51:00:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:804 -> [UART, PM25] Reading data...
19:51:00:805 -> [UART, PM25] Data not available.
19:51:00:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:805 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:805 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:826 -> [UART, PM25] Reading data...
19:51:00:826 -> [UART, PM25] Data not available.
19:51:00:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:826 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:826 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:846 -> [UART, PM25] Reading data...
19:51:00:847 -> [UART, PM25] Data not available.
19:51:00:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:847 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:847 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:867 -> [UART, PM25] Reading data...
19:51:00:868 -> [UART, PM25] Data not available.
19:51:00:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:868 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:868 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:889 -> [UART, PM25] Reading data...
19:51:00:889 -> [UART, PM25] Data not available.
19:51:00:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:889 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:889 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:909 -> [UART, PM25] Reading data...
19:51:00:910 -> [UART, PM25] Data not available.
19:51:00:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:910 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:910 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:930 -> [UART, PM25] Reading data...
19:51:00:931 -> [UART, PM25] Data not available.
19:51:00:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:963 -> [UART, PM25] Reading data...
19:51:00:964 -> [UART, PM25] Data not available.
19:51:00:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:964 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:964 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:972 -> [UART, PM25] Reading data...
19:51:00:973 -> [UART, PM25] Data not available.
19:51:00:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:973 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:973 -> [UART, PM25] Uart available, resetting event queue..
19:51:00:994 -> [UART, PM25] Reading data...
19:51:00:994 -> [UART, PM25] Data not available.
19:51:00:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:00:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:00:994 -> [UART, PM25] Uart available, clearing write errors..
19:51:00:994 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:014 -> [UART, PM25] Reading data...
19:51:01:015 -> [UART, PM25] Data not available.
19:51:01:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:035 -> [UART, PM25] Reading data...
19:51:01:036 -> [UART, PM25] Data not available.
19:51:01:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:056 -> [UART, PM25] Reading data...
19:51:01:057 -> [UART, PM25] Data not available.
19:51:01:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:057 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:057 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:077 -> [UART, PM25] Reading data...
19:51:01:078 -> [UART, PM25] Data not available.
19:51:01:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:101 -> [UART, PM25] Reading data...
19:51:01:101 -> [UART, PM25] Data not available.
19:51:01:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:101 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:101 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:119 -> [UART, PM25] Reading data...
19:51:01:120 -> [UART, PM25] Data not available.
19:51:01:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:120 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:120 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:140 -> [UART, PM25] Reading data...
19:51:01:141 -> [UART, PM25] Data not available.
19:51:01:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:161 -> [UART, PM25] Reading data...
19:51:01:162 -> [UART, PM25] Data not available.
19:51:01:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:183 -> [UART, PM25] Reading data...
19:51:01:183 -> [UART, PM25] Data not available.
19:51:01:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:203 -> [UART, PM25] Reading data...
19:51:01:205 -> [UART, PM25] Data not available.
19:51:01:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:205 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:205 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:224 -> [UART, PM25] Reading data...
19:51:01:225 -> [UART, PM25] Data not available.
19:51:01:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:225 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:225 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:245 -> [UART, PM25] Reading data...
19:51:01:246 -> [UART, PM25] Data not available.
19:51:01:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:246 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:246 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:267 -> [UART, PM25] Reading data...
19:51:01:267 -> [UART, PM25] Data not available.
19:51:01:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:267 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:267 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:287 -> [UART, PM25] Reading data...
19:51:01:288 -> [UART, PM25] Data not available.
19:51:01:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:288 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:288 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:309 -> [UART, PM25] Reading data...
19:51:01:309 -> [UART, PM25] Data not available.
19:51:01:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:309 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:309 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:329 -> [UART, PM25] Reading data...
19:51:01:330 -> [UART, PM25] Data not available.
19:51:01:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:330 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:330 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:350 -> [UART, PM25] Reading data...
19:51:01:351 -> [UART, PM25] Data not available.
19:51:01:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:351 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:351 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:372 -> [UART, PM25] Reading data...
19:51:01:372 -> [UART, PM25] Data not available.
19:51:01:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:372 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:372 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:392 -> [UART, PM25] Reading data...
19:51:01:393 -> [UART, PM25] Data not available.
19:51:01:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:393 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:393 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:414 -> [UART, PM25] Reading data...
19:51:01:414 -> [UART, PM25] Data not available.
19:51:01:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:414 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:414 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:434 -> [UART, PM25] Reading data...
19:51:01:435 -> [UART, PM25] Data not available.
19:51:01:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:435 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:435 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:486 -> [UART, PM25] Reading data...
19:51:01:498 -> [UART, PM25] Data not available.
19:51:01:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:498 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:498 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:498 -> [UART, PM25] Reading data...
19:51:01:498 -> [UART, PM25] Data not available.
19:51:01:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:498 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:498 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:498 -> [UART, PM25] Reading data...
19:51:01:498 -> [UART, PM25] Data not available.
19:51:01:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:498 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:498 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:519 -> [UART, PM25] Reading data...
19:51:01:519 -> [UART, PM25] Data not available.
19:51:01:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:519 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:519 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:539 -> [UART, PM25] Reading data...
19:51:01:540 -> [UART, PM25] Data not available.
19:51:01:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:540 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:540 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:560 -> [UART, PM25] Reading data...
19:51:01:561 -> [UART, PM25] Data not available.
19:51:01:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:561 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:561 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:582 -> [UART, PM25] Reading data...
19:51:01:582 -> [UART, PM25] Data not available.
19:51:01:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:582 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:582 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:603 -> [UART, PM25] Reading data...
19:51:01:603 -> [UART, PM25] Data not available.
19:51:01:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:603 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:603 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:623 -> [UART, PM25] Reading data...
19:51:01:624 -> [UART, PM25] Data not available.
19:51:01:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:624 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:624 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:644 -> [UART, PM25] Reading data...
19:51:01:645 -> [UART, PM25] Data not available.
19:51:01:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:645 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:645 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:665 -> [UART, PM25] Reading data...
19:51:01:666 -> [UART, PM25] Data not available.
19:51:01:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:666 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:666 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:689 -> [UART, PM25] Reading data...
19:51:01:689 -> [UART, PM25] Data not available.
19:51:01:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:689 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:689 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:708 -> [UART, PM25] Reading data...
19:51:01:708 -> [UART, PM25] Data not available.
19:51:01:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:708 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:708 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:728 -> [UART, PM25] Reading data...
19:51:01:729 -> [UART, PM25] Data not available.
19:51:01:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:729 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:729 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:749 -> [UART, PM25] Reading data...
19:51:01:750 -> [UART, PM25] Data not available.
19:51:01:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:750 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:750 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:770 -> [UART, PM25] Reading data...
19:51:01:771 -> [UART, PM25] Data not available.
19:51:01:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:771 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:771 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:791 -> [UART, PM25] Reading data...
19:51:01:792 -> [UART, PM25] Data not available.
19:51:01:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:792 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:792 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:813 -> [UART, PM25] Reading data...
19:51:01:813 -> [UART, PM25] Data not available.
19:51:01:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:813 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:813 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:833 -> [UART, PM25] Reading data...
19:51:01:834 -> [UART, PM25] Data not available.
19:51:01:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:834 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:834 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:854 -> [UART, PM25] Reading data...
19:51:01:855 -> [UART, PM25] Data not available.
19:51:01:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:855 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:855 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:876 -> [UART, PM25] Reading data...
19:51:01:876 -> [UART, PM25] Data not available.
19:51:01:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:876 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:876 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:896 -> [UART, PM25] Reading data...
19:51:01:897 -> [UART, PM25] Data not available.
19:51:01:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:917 -> [UART, PM25] Reading data...
19:51:01:918 -> [UART, PM25] Data not available.
19:51:01:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:938 -> [UART, PM25] Reading data...
19:51:01:939 -> [UART, PM25] Data not available.
19:51:01:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:939 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:939 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:959 -> [UART, PM25] Reading data...
19:51:01:960 -> [UART, PM25] Data not available.
19:51:01:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:960 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:960 -> [UART, PM25] Uart available, resetting event queue..
19:51:01:980 -> [UART, PM25] Reading data...
19:51:01:981 -> [UART, PM25] Data not available.
19:51:01:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:01:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:01:981 -> [UART, PM25] Uart available, clearing write errors..
19:51:01:981 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:001 -> [UART, PM25] Reading data...
19:51:02:002 -> [UART, PM25] Data not available.
19:51:02:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:002 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:002 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:023 -> [UART, PM25] Reading data...
19:51:02:023 -> [UART, PM25] Data not available.
19:51:02:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:023 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:023 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:043 -> [UART, PM25] Reading data...
19:51:02:044 -> [UART, PM25] Data not available.
19:51:02:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:044 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:044 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:064 -> [UART, PM25] Reading data...
19:51:02:065 -> [UART, PM25] Data not available.
19:51:02:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:065 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:065 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:085 -> [UART, PM25] Reading data...
19:51:02:086 -> [UART, PM25] Data not available.
19:51:02:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:086 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:086 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:106 -> [UART, PM25] Reading data...
19:51:02:107 -> [UART, PM25] Data not available.
19:51:02:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:107 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:107 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:127 -> [UART, PM25] Reading data...
19:51:02:128 -> [UART, PM25] Data not available.
19:51:02:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:148 -> [UART, PM25] Reading data...
19:51:02:149 -> [UART, PM25] Data not available.
19:51:02:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:149 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:149 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:169 -> [UART, PM25] Reading data...
19:51:02:170 -> [UART, PM25] Data not available.
19:51:02:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:190 -> [UART, PM25] Reading data...
19:51:02:191 -> [UART, PM25] Data not available.
19:51:02:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:191 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:191 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:211 -> [UART, PM25] Reading data...
19:51:02:212 -> [UART, PM25] Data not available.
19:51:02:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:212 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:212 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:232 -> [UART, PM25] Reading data...
19:51:02:232 -> [UART, PM25] Data not available.
19:51:02:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:233 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:233 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:253 -> [UART, PM25] Reading data...
19:51:02:254 -> [UART, PM25] Data not available.
19:51:02:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:254 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:254 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:274 -> [UART, PM25] Reading data...
19:51:02:275 -> [UART, PM25] Data not available.
19:51:02:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:295 -> [UART, PM25] Reading data...
19:51:02:296 -> [UART, PM25] Data not available.
19:51:02:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:316 -> [UART, PM25] Reading data...
19:51:02:317 -> [UART, PM25] Data not available.
19:51:02:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:337 -> [UART, PM25] Reading data...
19:51:02:338 -> [UART, PM25] Data not available.
19:51:02:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:358 -> [UART, PM25] Reading data...
19:51:02:359 -> [UART, PM25] Data not available.
19:51:02:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:379 -> [UART, PM25] Reading data...
19:51:02:380 -> [UART, PM25] Data not available.
19:51:02:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:380 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:380 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:400 -> [UART, PM25] Reading data...
19:51:02:401 -> [UART, PM25] Data not available.
19:51:02:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:422 -> [UART, PM25] Reading data...
19:51:02:422 -> [UART, PM25] Data not available.
19:51:02:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:422 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:422 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:442 -> [UART, PM25] Reading data...
19:51:02:443 -> [UART, PM25] Data not available.
19:51:02:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:463 -> [UART, PM25] Reading data...
19:51:02:464 -> [UART, PM25] Data not available.
19:51:02:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:485 -> [UART, PM25] Reading data...
19:51:02:485 -> [UART, PM25] Data not available.
19:51:02:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:485 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:485 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:516 -> [UART, PM25] Reading data...
19:51:02:516 -> [UART, PM25] Data not available.
19:51:02:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:526 -> [UART, PM25] Reading data...
19:51:02:527 -> [UART, PM25] Data not available.
19:51:02:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:527 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:527 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:547 -> [UART, PM25] Reading data...
19:51:02:548 -> [UART, PM25] Data not available.
19:51:02:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:548 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:548 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:568 -> [UART, PM25] Reading data...
19:51:02:569 -> [UART, PM25] Data not available.
19:51:02:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:589 -> [UART, PM25] Reading data...
19:51:02:590 -> [UART, PM25] Data not available.
19:51:02:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:611 -> [UART, PM25] Reading data...
19:51:02:611 -> [UART, PM25] Data not available.
19:51:02:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:611 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:611 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:635 -> [UART, PM25] Reading data...
19:51:02:636 -> [UART, PM25] Data not available.
19:51:02:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:636 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:636 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:653 -> [UART, PM25] Reading data...
19:51:02:653 -> [UART, PM25] Data not available.
19:51:02:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:653 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:653 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:674 -> [UART, PM25] Reading data...
19:51:02:674 -> [UART, PM25] Data not available.
19:51:02:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:674 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:674 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:694 -> [UART, PM25] Reading data...
19:51:02:695 -> [UART, PM25] Data not available.
19:51:02:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:695 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:695 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:715 -> [UART, PM25] Reading data...
19:51:02:716 -> [UART, PM25] Data not available.
19:51:02:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:736 -> [UART, PM25] Reading data...
19:51:02:737 -> [UART, PM25] Data not available.
19:51:02:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:737 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:737 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:757 -> [UART, PM25] Reading data...
19:51:02:757 -> [UART, PM25] Data not available.
19:51:02:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:758 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:758 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:778 -> [UART, PM25] Reading data...
19:51:02:779 -> [UART, PM25] Data not available.
19:51:02:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:779 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:779 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:799 -> [UART, PM25] Reading data...
19:51:02:800 -> [UART, PM25] Data not available.
19:51:02:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:800 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:800 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:820 -> [UART, PM25] Reading data...
19:51:02:820 -> [UART, PM25] Data not available.
19:51:02:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:821 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:821 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:841 -> [UART, PM25] Reading data...
19:51:02:842 -> [UART, PM25] Data not available.
19:51:02:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:842 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:842 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:862 -> [UART, PM25] Reading data...
19:51:02:863 -> [UART, PM25] Data not available.
19:51:02:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:863 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:863 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:883 -> [UART, PM25] Reading data...
19:51:02:884 -> [UART, PM25] Data not available.
19:51:02:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:884 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:884 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:904 -> [UART, PM25] Reading data...
19:51:02:905 -> [UART, PM25] Data not available.
19:51:02:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:905 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:905 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:925 -> [UART, PM25] Reading data...
19:51:02:926 -> [UART, PM25] Data not available.
19:51:02:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:926 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:926 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:947 -> [UART, PM25] Reading data...
19:51:02:947 -> [UART, PM25] Data not available.
19:51:02:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:947 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:947 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:967 -> [UART, PM25] Reading data...
19:51:02:971 -> [UART, PM25] Data not available.
19:51:02:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:971 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:971 -> [UART, PM25] Uart available, resetting event queue..
19:51:02:988 -> [UART, PM25] Reading data...
19:51:02:989 -> [UART, PM25] Data not available.
19:51:02:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:02:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:02:989 -> [UART, PM25] Uart available, clearing write errors..
19:51:02:989 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:009 -> [UART, PM25] Reading data...
19:51:03:010 -> [UART, PM25] Data not available.
19:51:03:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:010 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:010 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:039 -> [UART, PM25] Reading data...
19:51:03:039 -> [UART, PM25] Data not available.
19:51:03:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:039 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:039 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:052 -> [UART, PM25] Reading data...
19:51:03:052 -> [UART, PM25] Data not available.
19:51:03:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:052 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:052 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:072 -> [UART, PM25] Reading data...
19:51:03:073 -> [UART, PM25] Data not available.
19:51:03:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:093 -> [UART, PM25] Reading data...
19:51:03:094 -> [UART, PM25] Data not available.
19:51:03:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:094 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:094 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:115 -> [UART, PM25] Reading data...
19:51:03:115 -> [UART, PM25] Data not available.
19:51:03:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:115 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:115 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:135 -> [UART, PM25] Reading data...
19:51:03:136 -> [UART, PM25] Data not available.
19:51:03:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:136 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:136 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:157 -> [UART, PM25] Reading data...
19:51:03:157 -> [UART, PM25] Data not available.
19:51:03:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:157 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:157 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:177 -> [UART, PM25] Reading data...
19:51:03:178 -> [UART, PM25] Data not available.
19:51:03:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:178 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:178 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:198 -> [UART, PM25] Reading data...
19:51:03:199 -> [UART, PM25] Data not available.
19:51:03:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:199 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:199 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:219 -> [UART, PM25] Reading data...
19:51:03:220 -> [UART, PM25] Data not available.
19:51:03:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:240 -> [UART, PM25] Reading data...
19:51:03:241 -> [UART, PM25] Data not available.
19:51:03:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:241 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:241 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:261 -> [UART, PM25] Reading data...
19:51:03:262 -> [UART, PM25] Data not available.
19:51:03:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:282 -> [UART, PM25] Reading data...
19:51:03:287 -> [UART, PM25] Data not available.
19:51:03:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:287 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:287 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:303 -> [UART, PM25] Reading data...
19:51:03:304 -> [UART, PM25] Data not available.
19:51:03:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:304 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:304 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:324 -> [UART, PM25] Reading data...
19:51:03:325 -> [UART, PM25] Data not available.
19:51:03:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:325 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:325 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:352 -> [UART, PM25] Reading data...
19:51:03:386 -> [UART, PM25] Data not available.
19:51:03:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:386 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:386 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:386 -> [UART, PM25] Reading data...
19:51:03:386 -> [UART, PM25] Data not available.
19:51:03:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:386 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:386 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:389 -> [UART, PM25] Reading data...
19:51:03:389 -> [UART, PM25] Data not available.
19:51:03:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:389 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:389 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:408 -> [UART, PM25] Reading data...
19:51:03:409 -> [UART, PM25] Data not available.
19:51:03:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:429 -> [UART, PM25] Reading data...
19:51:03:430 -> [UART, PM25] Data not available.
19:51:03:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:430 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:430 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:450 -> [UART, PM25] Reading data...
19:51:03:451 -> [UART, PM25] Data not available.
19:51:03:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:472 -> [UART, PM25] Reading data...
19:51:03:472 -> [UART, PM25] Data not available.
19:51:03:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:492 -> [UART, PM25] Reading data...
19:51:03:493 -> [UART, PM25] Data not available.
19:51:03:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:513 -> [UART, PM25] Reading data...
19:51:03:514 -> [UART, PM25] Data not available.
19:51:03:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:514 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:514 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:534 -> [UART, PM25] Reading data...
19:51:03:535 -> [UART, PM25] Data not available.
19:51:03:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:535 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:535 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:564 -> [UART, PM25] Reading data...
19:51:03:564 -> [UART, PM25] Data not available.
19:51:03:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:564 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:564 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:576 -> [UART, PM25] Reading data...
19:51:03:577 -> [UART, PM25] Data not available.
19:51:03:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:597 -> [UART, PM25] Reading data...
19:51:03:598 -> [UART, PM25] Data not available.
19:51:03:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:618 -> [UART, PM25] Reading data...
19:51:03:619 -> [UART, PM25] Data not available.
19:51:03:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:619 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:619 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:640 -> [UART, PM25] Reading data...
19:51:03:641 -> [UART, PM25] Data not available.
19:51:03:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:641 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:641 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:662 -> [UART, PM25] Reading data...
19:51:03:662 -> [UART, PM25] Data not available.
19:51:03:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:662 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:662 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:682 -> [UART, PM25] Reading data...
19:51:03:683 -> [UART, PM25] Data not available.
19:51:03:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:683 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:683 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:703 -> [UART, PM25] Reading data...
19:51:03:704 -> [UART, PM25] Data not available.
19:51:03:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:704 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:704 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:724 -> [UART, PM25] Reading data...
19:51:03:725 -> [UART, PM25] Data not available.
19:51:03:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:725 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:725 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:745 -> [UART, PM25] Reading data...
19:51:03:746 -> [UART, PM25] Data not available.
19:51:03:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:746 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:746 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:767 -> [UART, PM25] Reading data...
19:51:03:767 -> [UART, PM25] Data not available.
19:51:03:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:767 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:767 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:787 -> [UART, PM25] Reading data...
19:51:03:788 -> [UART, PM25] Data not available.
19:51:03:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:788 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:788 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:808 -> [UART, PM25] Reading data...
19:51:03:809 -> [UART, PM25] Data not available.
19:51:03:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:809 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:809 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:829 -> [UART, PM25] Reading data...
19:51:03:830 -> [UART, PM25] Data not available.
19:51:03:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:830 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:830 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:851 -> [UART, PM25] Reading data...
19:51:03:851 -> [UART, PM25] Data not available.
19:51:03:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:851 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:851 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:871 -> [UART, PM25] Reading data...
19:51:03:872 -> [UART, PM25] Data not available.
19:51:03:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:872 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:872 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:892 -> [UART, PM25] Reading data...
19:51:03:893 -> [UART, PM25] Data not available.
19:51:03:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:893 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:893 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:913 -> [UART, PM25] Reading data...
19:51:03:914 -> [UART, PM25] Data not available.
19:51:03:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:914 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:914 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:934 -> [UART, PM25] Reading data...
19:51:03:935 -> [UART, PM25] Data not available.
19:51:03:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:935 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:935 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:955 -> [UART, PM25] Reading data...
19:51:03:956 -> [UART, PM25] Data not available.
19:51:03:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:956 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:956 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:976 -> [UART, PM25] Reading data...
19:51:03:977 -> [UART, PM25] Data not available.
19:51:03:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:977 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:977 -> [UART, PM25] Uart available, resetting event queue..
19:51:03:997 -> [UART, PM25] Reading data...
19:51:03:998 -> [UART, PM25] Data not available.
19:51:03:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:03:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:03:998 -> [UART, PM25] Uart available, clearing write errors..
19:51:03:998 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:018 -> [UART, PM25] Reading data...
19:51:04:019 -> [UART, PM25] Data not available.
19:51:04:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:019 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:019 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:039 -> [UART, PM25] Reading data...
19:51:04:040 -> [UART, PM25] Data not available.
19:51:04:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:040 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:040 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:061 -> [UART, PM25] Reading data...
19:51:04:061 -> [UART, PM25] Data not available.
19:51:04:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:061 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:061 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:086 -> [UART, PM25] Reading data...
19:51:04:086 -> [UART, PM25] Data not available.
19:51:04:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:086 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:086 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:103 -> [UART, PM25] Reading data...
19:51:04:103 -> [UART, PM25] Data not available.
19:51:04:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:103 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:103 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:123 -> [UART, PM25] Reading data...
19:51:04:123 -> [UART, PM25] Data not available.
19:51:04:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:124 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:124 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:144 -> [UART, PM25] Reading data...
19:51:04:145 -> [UART, PM25] Data not available.
19:51:04:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:145 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:145 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:166 -> [UART, PM25] Reading data...
19:51:04:166 -> [UART, PM25] Data not available.
19:51:04:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:166 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:166 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:186 -> [UART, PM25] Reading data...
19:51:04:187 -> [UART, PM25] Data not available.
19:51:04:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:187 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:187 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:207 -> [UART, PM25] Reading data...
19:51:04:208 -> [UART, PM25] Data not available.
19:51:04:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:208 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:208 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:228 -> [UART, PM25] Reading data...
19:51:04:229 -> [UART, PM25] Data not available.
19:51:04:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:229 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:229 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:249 -> [UART, PM25] Reading data...
19:51:04:250 -> [UART, PM25] Data not available.
19:51:04:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:250 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:250 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:270 -> [UART, PM25] Reading data...
19:51:04:271 -> [UART, PM25] Data not available.
19:51:04:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:271 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:271 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:291 -> [UART, PM25] Reading data...
19:51:04:292 -> [UART, PM25] Data not available.
19:51:04:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:292 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:292 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:312 -> [UART, PM25] Reading data...
19:51:04:313 -> [UART, PM25] Data not available.
19:51:04:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:313 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:313 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:333 -> [UART, PM25] Reading data...
19:51:04:334 -> [UART, PM25] Data not available.
19:51:04:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:334 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:334 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:355 -> [UART, PM25] Reading data...
19:51:04:355 -> [UART, PM25] Data not available.
19:51:04:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:355 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:355 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:376 -> [UART, PM25] Reading data...
19:51:04:376 -> [UART, PM25] Data not available.
19:51:04:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:376 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:376 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:396 -> [UART, PM25] Reading data...
19:51:04:397 -> [UART, PM25] Data not available.
19:51:04:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:397 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:397 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:417 -> [UART, PM25] Reading data...
19:51:04:418 -> [UART, PM25] Data not available.
19:51:04:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:418 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:418 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:438 -> [UART, PM25] Reading data...
19:51:04:439 -> [UART, PM25] Data not available.
19:51:04:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:439 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:439 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:459 -> [UART, PM25] Reading data...
19:51:04:460 -> [UART, PM25] Data not available.
19:51:04:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:460 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:460 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:481 -> [UART, PM25] Reading data...
19:51:04:481 -> [UART, PM25] Data not available.
19:51:04:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:481 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:481 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:501 -> [UART, PM25] Reading data...
19:51:04:502 -> [UART, PM25] Data not available.
19:51:04:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:502 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:502 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:522 -> [UART, PM25] Reading data...
19:51:04:523 -> [UART, PM25] Data not available.
19:51:04:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:523 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:523 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:543 -> [UART, PM25] Reading data...
19:51:04:544 -> [UART, PM25] Data not available.
19:51:04:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:544 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:544 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:565 -> [UART, PM25] Reading data...
19:51:04:565 -> [UART, PM25] Data not available.
19:51:04:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:565 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:565 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:596 -> [UART, PM25] Reading data...
19:51:04:597 -> [UART, PM25] Data not available.
19:51:04:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:597 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:597 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:606 -> [UART, PM25] Reading data...
19:51:04:607 -> [UART, PM25] Data not available.
19:51:04:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:607 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:607 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:627 -> [UART, PM25] Reading data...
19:51:04:628 -> [UART, PM25] Data not available.
19:51:04:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:628 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:628 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:648 -> [UART, PM25] Reading data...
19:51:04:649 -> [UART, PM25] Data not available.
19:51:04:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:649 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:649 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:669 -> [UART, PM25] Reading data...
19:51:04:670 -> [UART, PM25] Data not available.
19:51:04:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:670 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:670 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:691 -> [UART, PM25] Reading data...
19:51:04:691 -> [UART, PM25] Data not available.
19:51:04:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:711 -> [UART, PM25] Reading data...
19:51:04:712 -> [UART, PM25] Data not available.
19:51:04:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:712 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:712 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:732 -> [UART, PM25] Reading data...
19:51:04:733 -> [UART, PM25] Data not available.
19:51:04:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:733 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:733 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:753 -> [UART, PM25] Reading data...
19:51:04:754 -> [UART, PM25] Data not available.
19:51:04:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:754 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:754 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:774 -> [UART, PM25] Reading data...
19:51:04:775 -> [UART, PM25] Data not available.
19:51:04:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:775 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:775 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:796 -> [UART, PM25] Reading data...
19:51:04:796 -> [UART, PM25] Data not available.
19:51:04:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:796 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:796 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:816 -> [UART, PM25] Reading data...
19:51:04:817 -> [UART, PM25] Data not available.
19:51:04:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:817 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:817 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:837 -> [UART, PM25] Reading data...
19:51:04:838 -> [UART, PM25] Data not available.
19:51:04:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:838 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:838 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:858 -> [UART, PM25] Reading data...
19:51:04:859 -> [UART, PM25] Data not available.
19:51:04:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:859 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:859 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:879 -> [UART, PM25] Reading data...
19:51:04:880 -> [UART, PM25] Data not available.
19:51:04:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:880 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:880 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:901 -> [UART, PM25] Reading data...
19:51:04:901 -> [UART, PM25] Data not available.
19:51:04:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:901 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:901 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:921 -> [UART, PM25] Reading data...
19:51:04:922 -> [UART, PM25] Data not available.
19:51:04:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:922 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:922 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:942 -> [UART, PM25] Reading data...
19:51:04:943 -> [UART, PM25] Data not available.
19:51:04:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:943 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:943 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:963 -> [UART, PM25] Reading data...
19:51:04:964 -> [UART, PM25] Data not available.
19:51:04:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:964 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:964 -> [UART, PM25] Uart available, resetting event queue..
19:51:04:985 -> [UART, PM25] Reading data...
19:51:04:985 -> [UART, PM25] Data not available.
19:51:04:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:04:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:04:985 -> [UART, PM25] Uart available, clearing write errors..
19:51:04:985 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:006 -> [UART, PM25] Reading data...
19:51:05:006 -> [UART, PM25] Data not available.
19:51:05:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:006 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:006 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:006 -> PING!
19:51:05:219 -> [UART, PM25] Reading data...
19:51:05:220 -> [UART, PM25] Data not available.
19:51:05:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:240 -> [UART, PM25] Reading data...
19:51:05:241 -> [UART, PM25] Data not available.
19:51:05:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:241 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:241 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:261 -> [UART, PM25] Reading data...
19:51:05:262 -> [UART, PM25] Data not available.
19:51:05:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:283 -> [UART, PM25] Reading data...
19:51:05:283 -> [UART, PM25] Data not available.
19:51:05:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:283 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:283 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:303 -> [UART, PM25] Reading data...
19:51:05:304 -> [UART, PM25] Data not available.
19:51:05:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:304 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:304 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:324 -> [UART, PM25] Reading data...
19:51:05:325 -> [UART, PM25] Data not available.
19:51:05:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:325 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:325 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:346 -> [UART, PM25] Reading data...
19:51:05:346 -> [UART, PM25] Data not available.
19:51:05:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:346 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:346 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:366 -> [UART, PM25] Reading data...
19:51:05:367 -> [UART, PM25] Data not available.
19:51:05:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:367 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:367 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:387 -> [UART, PM25] Reading data...
19:51:05:388 -> [UART, PM25] Data not available.
19:51:05:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:388 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:388 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:408 -> [UART, PM25] Reading data...
19:51:05:409 -> [UART, PM25] Data not available.
19:51:05:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:429 -> [UART, PM25] Reading data...
19:51:05:430 -> [UART, PM25] Data not available.
19:51:05:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:430 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:430 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:450 -> [UART, PM25] Reading data...
19:51:05:451 -> [UART, PM25] Data not available.
19:51:05:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:471 -> [UART, PM25] Reading data...
19:51:05:472 -> [UART, PM25] Data not available.
19:51:05:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:492 -> [UART, PM25] Reading data...
19:51:05:493 -> [UART, PM25] Data not available.
19:51:05:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:514 -> [UART, PM25] Reading data...
19:51:05:514 -> [UART, PM25] Data not available.
19:51:05:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:514 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:514 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:534 -> [UART, PM25] Reading data...
19:51:05:535 -> [UART, PM25] Data not available.
19:51:05:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:535 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:535 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:555 -> [UART, PM25] Reading data...
19:51:05:556 -> [UART, PM25] Data not available.
19:51:05:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:556 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:556 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:576 -> [UART, PM25] Reading data...
19:51:05:577 -> [UART, PM25] Data not available.
19:51:05:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:597 -> [UART, PM25] Reading data...
19:51:05:599 -> [UART, PM25] Data not available.
19:51:05:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:599 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:599 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:625 -> [UART, PM25] Reading data...
19:51:05:626 -> [UART, PM25] Data not available.
19:51:05:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:626 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:626 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:639 -> [UART, PM25] Reading data...
19:51:05:640 -> [UART, PM25] Data not available.
19:51:05:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:660 -> [UART, PM25] Reading data...
19:51:05:661 -> [UART, PM25] Data not available.
19:51:05:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:661 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:661 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:681 -> [UART, PM25] Reading data...
19:51:05:682 -> [UART, PM25] Data not available.
19:51:05:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:702 -> [UART, PM25] Reading data...
19:51:05:703 -> [UART, PM25] Data not available.
19:51:05:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:703 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:703 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:723 -> [UART, PM25] Reading data...
19:51:05:724 -> [UART, PM25] Data not available.
19:51:05:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:744 -> [UART, PM25] Reading data...
19:51:05:745 -> [UART, PM25] Data not available.
19:51:05:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:766 -> [UART, PM25] Reading data...
19:51:05:766 -> [UART, PM25] Data not available.
19:51:05:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:786 -> [UART, PM25] Reading data...
19:51:05:787 -> [UART, PM25] Data not available.
19:51:05:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:787 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:787 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:808 -> [UART, PM25] Reading data...
19:51:05:808 -> [UART, PM25] Data not available.
19:51:05:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:828 -> [UART, PM25] Reading data...
19:51:05:829 -> [UART, PM25] Data not available.
19:51:05:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:849 -> [UART, PM25] Reading data...
19:51:05:850 -> [UART, PM25] Data not available.
19:51:05:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:850 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:850 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:870 -> [UART, PM25] Reading data...
19:51:05:871 -> [UART, PM25] Data not available.
19:51:05:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:871 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:871 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:891 -> [UART, PM25] Reading data...
19:51:05:892 -> [UART, PM25] Data not available.
19:51:05:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:892 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:892 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:913 -> [UART, PM25] Reading data...
19:51:05:913 -> [UART, PM25] Data not available.
19:51:05:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:913 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:913 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:933 -> [UART, PM25] Reading data...
19:51:05:934 -> [UART, PM25] Data not available.
19:51:05:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:934 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:934 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:954 -> [UART, PM25] Reading data...
19:51:05:955 -> [UART, PM25] Data not available.
19:51:05:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:955 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:955 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:975 -> [UART, PM25] Reading data...
19:51:05:976 -> [UART, PM25] Data not available.
19:51:05:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:976 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:976 -> [UART, PM25] Uart available, resetting event queue..
19:51:05:996 -> [UART, PM25] Reading data...
19:51:05:997 -> [UART, PM25] Data not available.
19:51:05:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:05:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:05:997 -> [UART, PM25] Uart available, clearing write errors..
19:51:05:997 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:018 -> [UART, PM25] Reading data...
19:51:06:018 -> [UART, PM25] Data not available.
19:51:06:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:018 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:018 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:038 -> [UART, PM25] Reading data...
19:51:06:039 -> [UART, PM25] Data not available.
19:51:06:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:039 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:039 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:059 -> [UART, PM25] Reading data...
19:51:06:059 -> [UART, PM25] Data not available.
19:51:06:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:060 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:060 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:081 -> [UART, PM25] Reading data...
19:51:06:081 -> [UART, PM25] Data not available.
19:51:06:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:081 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:081 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:101 -> [UART, PM25] Reading data...
19:51:06:102 -> [UART, PM25] Data not available.
19:51:06:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:102 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:102 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:122 -> [UART, PM25] Reading data...
19:51:06:123 -> [UART, PM25] Data not available.
19:51:06:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:123 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:123 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:148 -> [UART, PM25] Reading data...
19:51:06:148 -> [UART, PM25] Data not available.
19:51:06:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:148 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:148 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:164 -> [UART, PM25] Reading data...
19:51:06:165 -> [UART, PM25] Data not available.
19:51:06:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:165 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:165 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:185 -> [UART, PM25] Reading data...
19:51:06:186 -> [UART, PM25] Data not available.
19:51:06:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:186 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:186 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:209 -> [UART, PM25] Reading data...
19:51:06:209 -> [UART, PM25] Data not available.
19:51:06:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:209 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:209 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:227 -> [UART, PM25] Reading data...
19:51:06:228 -> [UART, PM25] Data not available.
19:51:06:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:228 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:228 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:248 -> [UART, PM25] Reading data...
19:51:06:249 -> [UART, PM25] Data not available.
19:51:06:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:249 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:249 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:269 -> [UART, PM25] Reading data...
19:51:06:270 -> [UART, PM25] Data not available.
19:51:06:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:270 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:270 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:290 -> [UART, PM25] Reading data...
19:51:06:291 -> [UART, PM25] Data not available.
19:51:06:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:291 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:291 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:311 -> [UART, PM25] Reading data...
19:51:06:311 -> [UART, PM25] Data not available.
19:51:06:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:312 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:312 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:332 -> [UART, PM25] Reading data...
19:51:06:333 -> [UART, PM25] Data not available.
19:51:06:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:333 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:333 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:353 -> [UART, PM25] Reading data...
19:51:06:354 -> [UART, PM25] Data not available.
19:51:06:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:354 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:354 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:374 -> [UART, PM25] Reading data...
19:51:06:375 -> [UART, PM25] Data not available.
19:51:06:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:375 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:375 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:395 -> [UART, PM25] Reading data...
19:51:06:396 -> [UART, PM25] Data not available.
19:51:06:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:396 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:396 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:417 -> [UART, PM25] Reading data...
19:51:06:417 -> [UART, PM25] Data not available.
19:51:06:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:417 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:417 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:437 -> [UART, PM25] Reading data...
19:51:06:438 -> [UART, PM25] Data not available.
19:51:06:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:438 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:438 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:458 -> [UART, PM25] Reading data...
19:51:06:459 -> [UART, PM25] Data not available.
19:51:06:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:459 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:459 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:479 -> [UART, PM25] Reading data...
19:51:06:480 -> [UART, PM25] Data not available.
19:51:06:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:480 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:480 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:500 -> [UART, PM25] Reading data...
19:51:06:501 -> [UART, PM25] Data not available.
19:51:06:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:501 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:501 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:521 -> [UART, PM25] Reading data...
19:51:06:522 -> [UART, PM25] Data not available.
19:51:06:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:522 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:522 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:542 -> [UART, PM25] Reading data...
19:51:06:543 -> [UART, PM25] Data not available.
19:51:06:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:543 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:543 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:563 -> [UART, PM25] Reading data...
19:51:06:564 -> [UART, PM25] Data not available.
19:51:06:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:564 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:564 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:584 -> [UART, PM25] Reading data...
19:51:06:584 -> [UART, PM25] Data not available.
19:51:06:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:585 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:585 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:606 -> [UART, PM25] Reading data...
19:51:06:606 -> [UART, PM25] Data not available.
19:51:06:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:606 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:606 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:627 -> [UART, PM25] Reading data...
19:51:06:627 -> [UART, PM25] Data not available.
19:51:06:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:627 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:627 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:659 -> [UART, PM25] Reading data...
19:51:06:660 -> [UART, PM25] Data not available.
19:51:06:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:660 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:660 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:668 -> [UART, PM25] Reading data...
19:51:06:669 -> [UART, PM25] Data not available.
19:51:06:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:669 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:669 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:689 -> [UART, PM25] Reading data...
19:51:06:690 -> [UART, PM25] Data not available.
19:51:06:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:690 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:690 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:710 -> [UART, PM25] Reading data...
19:51:06:711 -> [UART, PM25] Data not available.
19:51:06:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:711 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:711 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:732 -> [UART, PM25] Reading data...
19:51:06:732 -> [UART, PM25] Data not available.
19:51:06:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:732 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:732 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:752 -> [UART, PM25] Reading data...
19:51:06:753 -> [UART, PM25] Data not available.
19:51:06:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:753 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:753 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:773 -> [UART, PM25] Reading data...
19:51:06:774 -> [UART, PM25] Data not available.
19:51:06:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:774 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:774 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:794 -> [UART, PM25] Reading data...
19:51:06:795 -> [UART, PM25] Data not available.
19:51:06:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:795 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:795 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:815 -> [UART, PM25] Reading data...19:51:06:837 -> [UART, PM25] Reading data...
19:51:06:837 -> [UART, PM25] Data not available.
19:51:06:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:837 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:837 -> [UART, PM25] Uart available, resetting event queue..

19:51:06:816 -> [UART, PM25] Data not available.
19:51:06:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:816 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:816 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:874 -> [UART, PM25] Reading data...
19:51:06:898 -> [UART, PM25] Data not available.
19:51:06:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:898 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:898 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:898 -> [UART, PM25] Reading data...
19:51:06:898 -> [UART, PM25] Data not available.
19:51:06:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:898 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:898 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:902 -> [UART, PM25] Reading data...
19:51:06:902 -> [UART, PM25] Data not available.
19:51:06:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:902 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:902 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:920 -> [UART, PM25] Reading data...
19:51:06:921 -> [UART, PM25] Data not available.
19:51:06:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:921 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:921 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:941 -> [UART, PM25] Reading data...
19:51:06:942 -> [UART, PM25] Data not available.
19:51:06:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:942 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:942 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:962 -> [UART, PM25] Reading data...
19:51:06:962 -> [UART, PM25] Data not available.
19:51:06:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:962 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:962 -> [UART, PM25] Uart available, resetting event queue..
19:51:06:984 -> [UART, PM25] Reading data...
19:51:06:985 -> [UART, PM25] Data not available.
19:51:06:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:06:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:06:985 -> [UART, PM25] Uart available, clearing write errors..
19:51:06:985 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:004 -> [UART, PM25] Reading data...
19:51:07:005 -> [UART, PM25] Data not available.
19:51:07:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:005 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:005 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:025 -> [UART, PM25] Reading data...
19:51:07:026 -> [UART, PM25] Data not available.
19:51:07:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:026 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:026 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:046 -> [UART, PM25] Reading data...
19:51:07:047 -> [UART, PM25] Data not available.
19:51:07:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:047 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:047 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:067 -> [UART, PM25] Reading data...
19:51:07:068 -> [UART, PM25] Data not available.
19:51:07:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:068 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:068 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:089 -> [UART, PM25] Reading data...
19:51:07:090 -> [UART, PM25] Data not available.
19:51:07:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:090 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:090 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:109 -> [UART, PM25] Reading data...
19:51:07:110 -> [UART, PM25] Data not available.
19:51:07:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:110 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:110 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:130 -> [UART, PM25] Reading data...
19:51:07:131 -> [UART, PM25] Data not available.
19:51:07:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:131 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:131 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:151 -> [UART, PM25] Reading data...
19:51:07:152 -> [UART, PM25] Data not available.
19:51:07:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:152 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:152 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:183 -> [UART, PM25] Reading data...
19:51:07:183 -> [UART, PM25] Data not available.
19:51:07:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:193 -> [UART, PM25] Reading data...
19:51:07:194 -> [UART, PM25] Data not available.
19:51:07:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:194 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:194 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:214 -> [UART, PM25] Reading data...
19:51:07:215 -> [UART, PM25] Data not available.
19:51:07:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:215 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:215 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:235 -> [UART, PM25] Reading data...
19:51:07:236 -> [UART, PM25] Data not available.
19:51:07:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:236 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:236 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:257 -> [UART, PM25] Reading data...
19:51:07:257 -> [UART, PM25] Data not available.
19:51:07:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:257 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:257 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:278 -> [UART, PM25] Reading data...
19:51:07:278 -> [UART, PM25] Data not available.
19:51:07:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:298 -> [UART, PM25] Reading data...
19:51:07:299 -> [UART, PM25] Data not available.
19:51:07:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:299 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:299 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:319 -> [UART, PM25] Reading data...
19:51:07:320 -> [UART, PM25] Data not available.
19:51:07:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:320 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:320 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:340 -> [UART, PM25] Reading data...
19:51:07:341 -> [UART, PM25] Data not available.
19:51:07:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:341 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:341 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:362 -> [UART, PM25] Reading data...
19:51:07:363 -> [UART, PM25] Data not available.
19:51:07:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:363 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:363 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:383 -> [UART, PM25] Reading data...
19:51:07:383 -> [UART, PM25] Data not available.
19:51:07:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:383 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:383 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:403 -> [UART, PM25] Reading data...
19:51:07:404 -> [UART, PM25] Data not available.
19:51:07:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:404 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:404 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:424 -> [UART, PM25] Reading data...
19:51:07:425 -> [UART, PM25] Data not available.
19:51:07:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:425 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:425 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:445 -> [UART, PM25] Reading data...
19:51:07:446 -> [UART, PM25] Data not available.
19:51:07:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:446 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:446 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:466 -> [UART, PM25] Reading data...
19:51:07:467 -> [UART, PM25] Data not available.
19:51:07:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:467 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:467 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:489 -> [UART, PM25] Reading data...
19:51:07:489 -> [UART, PM25] Data not available.
19:51:07:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:489 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:489 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:508 -> [UART, PM25] Reading data...
19:51:07:509 -> [UART, PM25] Data not available.
19:51:07:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:509 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:509 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:529 -> [UART, PM25] Reading data...
19:51:07:529 -> [UART, PM25] Data not available.
19:51:07:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:530 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:530 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:551 -> [UART, PM25] Reading data...
19:51:07:551 -> [UART, PM25] Data not available.
19:51:07:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:551 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:551 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:571 -> [UART, PM25] Reading data...
19:51:07:571 -> [UART, PM25] Data not available.
19:51:07:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:572 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:572 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:592 -> [UART, PM25] Reading data...
19:51:07:593 -> [UART, PM25] Data not available.
19:51:07:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:593 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:593 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:613 -> [UART, PM25] Reading data...
19:51:07:614 -> [UART, PM25] Data not available.
19:51:07:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:614 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:614 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:634 -> [UART, PM25] Reading data...
19:51:07:635 -> [UART, PM25] Data not available.
19:51:07:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:635 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:635 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:655 -> [UART, PM25] Reading data...
19:51:07:656 -> [UART, PM25] Data not available.
19:51:07:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:656 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:656 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:676 -> [UART, PM25] Reading data...
19:51:07:677 -> [UART, PM25] Data not available.
19:51:07:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:677 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:677 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:697 -> [UART, PM25] Reading data...
19:51:07:698 -> [UART, PM25] Data not available.
19:51:07:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:698 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:698 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:718 -> [UART, PM25] Reading data...
19:51:07:719 -> [UART, PM25] Data not available.
19:51:07:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:719 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:719 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:739 -> [UART, PM25] Reading data...
19:51:07:740 -> [UART, PM25] Data not available.
19:51:07:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:740 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:740 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:760 -> [UART, PM25] Reading data...
19:51:07:761 -> [UART, PM25] Data not available.
19:51:07:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:761 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:761 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:781 -> [UART, PM25] Reading data...
19:51:07:784 -> [UART, PM25] Data not available.
19:51:07:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:802 -> [UART, PM25] Reading data...
19:51:07:803 -> [UART, PM25] Data not available.
19:51:07:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:803 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:803 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:823 -> [UART, PM25] Reading data...
19:51:07:824 -> [UART, PM25] Data not available.
19:51:07:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:824 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:824 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:844 -> [UART, PM25] Reading data...
19:51:07:845 -> [UART, PM25] Data not available.
19:51:07:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:845 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:845 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:865 -> [UART, PM25] Reading data...19:51:07:907 -> [UART, PM25] Reading data...
19:51:07:908 -> [UART, PM25] Data not available.
19:51:07:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:908 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:908 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:928 -> [UART, PM25] Reading data...
19:51:07:866 -> [UART, PM25] Data not available.
19:51:07:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:866 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:866 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:889 -> [UART, PM25] Reading data...
19:51:07:890 -> [UART, PM25] Data not available.
19:51:07:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:890 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:890 -> [UART, PM25] Uart available, resetting event queue..

19:51:07:929 -> [UART, PM25] Data not available.
19:51:07:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:929 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:929 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:949 -> [UART, PM25] Reading data...
19:51:07:950 -> [UART, PM25] Data not available.
19:51:07:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:950 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:950 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:971 -> [UART, PM25] Reading data...
19:51:07:971 -> [UART, PM25] Data not available.
19:51:07:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:971 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:971 -> [UART, PM25] Uart available, resetting event queue..
19:51:07:991 -> [UART, PM25] Reading data...
19:51:07:992 -> [UART, PM25] Data not available.
19:51:07:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:07:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:07:992 -> [UART, PM25] Uart available, clearing write errors..
19:51:07:992 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:012 -> [UART, PM25] Reading data...
19:51:08:013 -> [UART, PM25] Data not available.
19:51:08:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:013 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:013 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:033 -> [UART, PM25] Reading data...
19:51:08:034 -> [UART, PM25] Data not available.
19:51:08:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:034 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:034 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:054 -> [UART, PM25] Reading data...
19:51:08:055 -> [UART, PM25] Data not available.
19:51:08:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:055 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:055 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:075 -> [UART, PM25] Reading data...
19:51:08:076 -> [UART, PM25] Data not available.
19:51:08:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:076 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:076 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:096 -> [UART, PM25] Reading data...
19:51:08:097 -> [UART, PM25] Data not available.
19:51:08:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:097 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:097 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:117 -> [UART, PM25] Reading data...
19:51:08:118 -> [UART, PM25] Data not available.
19:51:08:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:118 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:118 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:138 -> [UART, PM25] Reading data...
19:51:08:139 -> [UART, PM25] Data not available.
19:51:08:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:139 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:139 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:159 -> [UART, PM25] Reading data...
19:51:08:160 -> [UART, PM25] Data not available.
19:51:08:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:160 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:160 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:181 -> [UART, PM25] Reading data...
19:51:08:181 -> [UART, PM25] Data not available.
19:51:08:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:181 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:181 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:211 -> [UART, PM25] Reading data...
19:51:08:213 -> [UART, PM25] Data not available.
19:51:08:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:213 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:213 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:222 -> [UART, PM25] Reading data...
19:51:08:222 -> [UART, PM25] Data not available.
19:51:08:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:223 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:223 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:243 -> [UART, PM25] Reading data...
19:51:08:244 -> [UART, PM25] Data not available.
19:51:08:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:244 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:244 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:265 -> [UART, PM25] Reading data...
19:51:08:265 -> [UART, PM25] Data not available.
19:51:08:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:265 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:265 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:285 -> [UART, PM25] Reading data...
19:51:08:286 -> [UART, PM25] Data not available.
19:51:08:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:286 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:286 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:306 -> [UART, PM25] Reading data...
19:51:08:307 -> [UART, PM25] Data not available.
19:51:08:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:307 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:307 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:327 -> [UART, PM25] Reading data...
19:51:08:328 -> [UART, PM25] Data not available.
19:51:08:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:328 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:328 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:348 -> [UART, PM25] Reading data...
19:51:08:349 -> [UART, PM25] Data not available.
19:51:08:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:349 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:349 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:370 -> [UART, PM25] Reading data...
19:51:08:370 -> [UART, PM25] Data not available.
19:51:08:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:370 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:370 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:390 -> [UART, PM25] Reading data...
19:51:08:391 -> [UART, PM25] Data not available.
19:51:08:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:391 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:391 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:411 -> [UART, PM25] Reading data...
19:51:08:412 -> [UART, PM25] Data not available.
19:51:08:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:412 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:412 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:432 -> [UART, PM25] Reading data...
19:51:08:433 -> [UART, PM25] Data not available.
19:51:08:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:433 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:433 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:453 -> [UART, PM25] Reading data...
19:51:08:454 -> [UART, PM25] Data not available.
19:51:08:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:454 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:454 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:474 -> [UART, PM25] Reading data...
19:51:08:475 -> [UART, PM25] Data not available.
19:51:08:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:475 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:475 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:495 -> [UART, PM25] Reading data...
19:51:08:496 -> [UART, PM25] Data not available.
19:51:08:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:496 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:496 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:516 -> [UART, PM25] Reading data...
19:51:08:517 -> [UART, PM25] Data not available.
19:51:08:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:517 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:517 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:537 -> [UART, PM25] Reading data...
19:51:08:537 -> [UART, PM25] Data not available.
19:51:08:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:537 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:537 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:558 -> [UART, PM25] Reading data...
19:51:08:559 -> [UART, PM25] Data not available.
19:51:08:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:559 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:559 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:579 -> [UART, PM25] Reading data...
19:51:08:580 -> [UART, PM25] Data not available.
19:51:08:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:580 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:580 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:600 -> [UART, PM25] Reading data...
19:51:08:601 -> [UART, PM25] Data not available.
19:51:08:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:638 -> [UART, PM25] Reading data...
19:51:08:647 -> [UART, PM25] Data not available.
19:51:08:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:647 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:647 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:647 -> [UART, PM25] Reading data...
19:51:08:647 -> [UART, PM25] Data not available.
19:51:08:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:647 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:647 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:663 -> [UART, PM25] Reading data...
19:51:08:664 -> [UART, PM25] Data not available.
19:51:08:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:664 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:664 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:685 -> [UART, PM25] Reading data...
19:51:08:685 -> [UART, PM25] Data not available.
19:51:08:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:685 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:685 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:705 -> [UART, PM25] Reading data...
19:51:08:706 -> [UART, PM25] Data not available.
19:51:08:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:706 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:706 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:736 -> [UART, PM25] Reading data...
19:51:08:736 -> [UART, PM25] Data not available.
19:51:08:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:736 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:736 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:747 -> [UART, PM25] Reading data...
19:51:08:748 -> [UART, PM25] Data not available.
19:51:08:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:748 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:748 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:768 -> [UART, PM25] Reading data...
19:51:08:769 -> [UART, PM25] Data not available.
19:51:08:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:769 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:769 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:789 -> [UART, PM25] Reading data...
19:51:08:789 -> [UART, PM25] Data not available.
19:51:08:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:790 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:790 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:810 -> [UART, PM25] Reading data...
19:51:08:811 -> [UART, PM25] Data not available.
19:51:08:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:811 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:811 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:831 -> [UART, PM25] Reading data...
19:51:08:832 -> [UART, PM25] Data not available.
19:51:08:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:832 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:832 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:852 -> [UART, PM25] Reading data...
19:51:08:853 -> [UART, PM25] Data not available.
19:51:08:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:853 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:853 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:873 -> [UART, PM25] Reading data...
19:51:08:874 -> [UART, PM25] Data not available.
19:51:08:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:874 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:874 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:894 -> [UART, PM25] Reading data...
19:51:08:895 -> [UART, PM25] Data not available.
19:51:08:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:895 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:895 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:915 -> [UART, PM25] Reading data...
19:51:08:916 -> [UART, PM25] Data not available.
19:51:08:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:916 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:916 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:936 -> [UART, PM25] Reading data...
19:51:08:937 -> [UART, PM25] Data not available.
19:51:08:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:937 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:937 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:957 -> [UART, PM25] Reading data...
19:51:08:958 -> [UART, PM25] Data not available.
19:51:08:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:958 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:958 -> [UART, PM25] Uart available, resetting event queue..
19:51:08:978 -> [UART, PM25] Reading data...
19:51:08:979 -> [UART, PM25] Data not available.
19:51:08:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:08:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:08:979 -> [UART, PM25] Uart available, clearing write errors..
19:51:08:979 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:000 -> [UART, PM25] Reading data...
19:51:09:000 -> [UART, PM25] Data not available.
19:51:09:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:000 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:000 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:020 -> [UART, PM25] Reading data...
19:51:09:021 -> [UART, PM25] Data not available.
19:51:09:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:021 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:021 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:041 -> [UART, PM25] Reading data...
19:51:09:042 -> [UART, PM25] Data not available.
19:51:09:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:042 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:042 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:062 -> [UART, PM25] Reading data...
19:51:09:063 -> [UART, PM25] Data not available.
19:51:09:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:063 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:063 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:084 -> [UART, PM25] Reading data...
19:51:09:084 -> [UART, PM25] Data not available.
19:51:09:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:084 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:084 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:105 -> [UART, PM25] Reading data...
19:51:09:106 -> [UART, PM25] Data not available.
19:51:09:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:106 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:106 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:126 -> [UART, PM25] Reading data...
19:51:09:127 -> [UART, PM25] Data not available.
19:51:09:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:127 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:127 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:147 -> [UART, PM25] Reading data...
19:51:09:148 -> [UART, PM25] Data not available.
19:51:09:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:148 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:148 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:170 -> [UART, PM25] Reading data...
19:51:09:170 -> [UART, PM25] Data not available.
19:51:09:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:190 -> [UART, PM25] Reading data...
19:51:09:190 -> [UART, PM25] Data not available.
19:51:09:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:190 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:190 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:212 -> [UART, PM25] Reading data...
19:51:09:213 -> [UART, PM25] Data not available.
19:51:09:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:213 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:213 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:232 -> [UART, PM25] Reading data...
19:51:09:233 -> [UART, PM25] Data not available.
19:51:09:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:233 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:233 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:257 -> [UART, PM25] Reading data...
19:51:09:257 -> [UART, PM25] Data not available.
19:51:09:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:257 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:257 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:276 -> [UART, PM25] Reading data...
19:51:09:276 -> [UART, PM25] Data not available.
19:51:09:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:276 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:276 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:295 -> [UART, PM25] Reading data...
19:51:09:296 -> [UART, PM25] Data not available.
19:51:09:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:316 -> [UART, PM25] Reading data...
19:51:09:317 -> [UART, PM25] Data not available.
19:51:09:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:337 -> [UART, PM25] Reading data...
19:51:09:338 -> [UART, PM25] Data not available.
19:51:09:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:358 -> [UART, PM25] Reading data...
19:51:09:359 -> [UART, PM25] Data not available.
19:51:09:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:380 -> [UART, PM25] Reading data...
19:51:09:380 -> [UART, PM25] Data not available.
19:51:09:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:380 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:380 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:401 -> [UART, PM25] Reading data...
19:51:09:401 -> [UART, PM25] Data not available.
19:51:09:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:421 -> [UART, PM25] Reading data...
19:51:09:422 -> [UART, PM25] Data not available.
19:51:09:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:422 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:422 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:442 -> [UART, PM25] Reading data...
19:51:09:443 -> [UART, PM25] Data not available.
19:51:09:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:463 -> [UART, PM25] Reading data...
19:51:09:464 -> [UART, PM25] Data not available.
19:51:09:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:484 -> [UART, PM25] Reading data...
19:51:09:489 -> [UART, PM25] Data not available.
19:51:09:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:489 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:489 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:505 -> [UART, PM25] Reading data...
19:51:09:506 -> [UART, PM25] Data not available.
19:51:09:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:506 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:506 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:526 -> [UART, PM25] Reading data...
19:51:09:527 -> [UART, PM25] Data not available.
19:51:09:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:527 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:527 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:547 -> [UART, PM25] Reading data...
19:51:09:548 -> [UART, PM25] Data not available.
19:51:09:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:548 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:548 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:568 -> [UART, PM25] Reading data...
19:51:09:569 -> [UART, PM25] Data not available.
19:51:09:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:589 -> [UART, PM25] Reading data...
19:51:09:590 -> [UART, PM25] Data not available.
19:51:09:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:610 -> [UART, PM25] Reading data...
19:51:09:611 -> [UART, PM25] Data not available.
19:51:09:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:611 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:611 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:631 -> [UART, PM25] Reading data...
19:51:09:632 -> [UART, PM25] Data not available.
19:51:09:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:632 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:632 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:652 -> [UART, PM25] Reading data...
19:51:09:658 -> [UART, PM25] Data not available.
19:51:09:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:673 -> [UART, PM25] Reading data...
19:51:09:673 -> [UART, PM25] Data not available.
19:51:09:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:674 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:674 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:694 -> [UART, PM25] Reading data...
19:51:09:695 -> [UART, PM25] Data not available.
19:51:09:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:695 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:695 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:715 -> [UART, PM25] Reading data...
19:51:09:716 -> [UART, PM25] Data not available.
19:51:09:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:716 -> PING!
19:51:09:932 -> [UART, PM25] Reading data...
19:51:09:934 -> [UART, PM25] Data not available.
19:51:09:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:934 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:934 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:951 -> [UART, PM25] Reading data...
19:51:09:952 -> [UART, PM25] Data not available.
19:51:09:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:952 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:952 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:972 -> [UART, PM25] Reading data...
19:51:09:973 -> [UART, PM25] Data not available.
19:51:09:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:973 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:973 -> [UART, PM25] Uart available, resetting event queue..
19:51:09:996 -> [UART, PM25] Reading data...
19:51:09:997 -> [UART, PM25] Data not available.
19:51:09:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:09:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:09:997 -> [UART, PM25] Uart available, clearing write errors..
19:51:09:997 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:015 -> [UART, PM25] Reading data...
19:51:10:015 -> [UART, PM25] Data not available.
19:51:10:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:035 -> [UART, PM25] Reading data...
19:51:10:036 -> [UART, PM25] Data not available.
19:51:10:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:056 -> [UART, PM25] Reading data...
19:51:10:056 -> [UART, PM25] Data not available.
19:51:10:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:057 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:057 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:077 -> [UART, PM25] Reading data...
19:51:10:078 -> [UART, PM25] Data not available.
19:51:10:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:098 -> [UART, PM25] Reading data...
19:51:10:099 -> [UART, PM25] Data not available.
19:51:10:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:099 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:099 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:120 -> [UART, PM25] Reading data...
19:51:10:120 -> [UART, PM25] Data not available.
19:51:10:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:120 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:120 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:140 -> [UART, PM25] Reading data...
19:51:10:141 -> [UART, PM25] Data not available.
19:51:10:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:161 -> [UART, PM25] Reading data...
19:51:10:162 -> [UART, PM25] Data not available.
19:51:10:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:182 -> [UART, PM25] Reading data...
19:51:10:183 -> [UART, PM25] Data not available.
19:51:10:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:204 -> [UART, PM25] Reading data...
19:51:10:204 -> [UART, PM25] Data not available.
19:51:10:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:204 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:204 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:225 -> [UART, PM25] Reading data...
19:51:10:226 -> [UART, PM25] Data not available.
19:51:10:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:226 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:226 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:246 -> [UART, PM25] Reading data...
19:51:10:247 -> [UART, PM25] Data not available.
19:51:10:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:247 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:247 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:267 -> [UART, PM25] Reading data...
19:51:10:268 -> [UART, PM25] Data not available.
19:51:10:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:268 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:268 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:293 -> [UART, PM25] Reading data...
19:51:10:294 -> [UART, PM25] Data not available.
19:51:10:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:294 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:294 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:309 -> [UART, PM25] Reading data...
19:51:10:310 -> [UART, PM25] Data not available.
19:51:10:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:310 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:310 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:330 -> [UART, PM25] Reading data...
19:51:10:331 -> [UART, PM25] Data not available.
19:51:10:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:331 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:331 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:351 -> [UART, PM25] Reading data...
19:51:10:352 -> [UART, PM25] Data not available.
19:51:10:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:352 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:352 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:372 -> [UART, PM25] Reading data...
19:51:10:373 -> [UART, PM25] Data not available.
19:51:10:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:373 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:373 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:393 -> [UART, PM25] Reading data...
19:51:10:393 -> [UART, PM25] Data not available.
19:51:10:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:393 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:393 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:414 -> [UART, PM25] Reading data...
19:51:10:415 -> [UART, PM25] Data not available.
19:51:10:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:415 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:415 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:435 -> [UART, PM25] Reading data...
19:51:10:436 -> [UART, PM25] Data not available.
19:51:10:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:436 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:436 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:456 -> [UART, PM25] Reading data...
19:51:10:457 -> [UART, PM25] Data not available.
19:51:10:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:457 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:457 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:477 -> [UART, PM25] Reading data...
19:51:10:478 -> [UART, PM25] Data not available.
19:51:10:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:478 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:478 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:498 -> [UART, PM25] Reading data...
19:51:10:499 -> [UART, PM25] Data not available.
19:51:10:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:499 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:499 -> [UART, PM25] Uart available, resetting event queue..

19:51:10:520 -> [UART, PM25] Data not available.
19:51:10:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:520 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:520 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:519 -> [UART, PM25] Reading data...19:51:10:540 -> [UART, PM25] Reading data...
19:51:10:541 -> [UART, PM25] Data not available.
19:51:10:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:541 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:541 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:587 -> [UART, PM25] Reading data...
19:51:10:590 -> [UART, PM25] Data not available.
19:51:10:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:590 -> [UART, PM25] Reading data...
19:51:10:590 -> [UART, PM25] Data not available.
19:51:10:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:603 -> [UART, PM25] Reading data...
19:51:10:604 -> [UART, PM25] Data not available.
19:51:10:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:604 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:604 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:625 -> [UART, PM25] Reading data...
19:51:10:626 -> [UART, PM25] Data not available.
19:51:10:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:626 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:626 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:645 -> [UART, PM25] Reading data...
19:51:10:645 -> [UART, PM25] Data not available.
19:51:10:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:645 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:645 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:666 -> [UART, PM25] Reading data...
19:51:10:667 -> [UART, PM25] Data not available.
19:51:10:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:667 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:667 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:687 -> [UART, PM25] Reading data...
19:51:10:688 -> [UART, PM25] Data not available.
19:51:10:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:688 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:688 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:708 -> [UART, PM25] Reading data...
19:51:10:709 -> [UART, PM25] Data not available.
19:51:10:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:709 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:709 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:729 -> [UART, PM25] Reading data...
19:51:10:730 -> [UART, PM25] Data not available.
19:51:10:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:730 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:730 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:750 -> [UART, PM25] Reading data...
19:51:10:751 -> [UART, PM25] Data not available.
19:51:10:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:751 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:751 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:771 -> [UART, PM25] Reading data...
19:51:10:772 -> [UART, PM25] Data not available.
19:51:10:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:772 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:772 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:792 -> [UART, PM25] Reading data...
19:51:10:793 -> [UART, PM25] Data not available.
19:51:10:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:793 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:793 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:813 -> [UART, PM25] Reading data...
19:51:10:814 -> [UART, PM25] Data not available.
19:51:10:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:814 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:814 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:834 -> [UART, PM25] Reading data...
19:51:10:836 -> [UART, PM25] Data not available.
19:51:10:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:836 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:836 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:855 -> [UART, PM25] Reading data...
19:51:10:856 -> [UART, PM25] Data not available.
19:51:10:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:856 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:856 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:876 -> [UART, PM25] Reading data...
19:51:10:877 -> [UART, PM25] Data not available.
19:51:10:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:877 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:877 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:898 -> [UART, PM25] Reading data...
19:51:10:898 -> [UART, PM25] Data not available.
19:51:10:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:898 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:898 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:918 -> [UART, PM25] Reading data...
19:51:10:919 -> [UART, PM25] Data not available.
19:51:10:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:919 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:919 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:939 -> [UART, PM25] Reading data...
19:51:10:940 -> [UART, PM25] Data not available.
19:51:10:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:940 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:940 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:960 -> [UART, PM25] Reading data...
19:51:10:961 -> [UART, PM25] Data not available.
19:51:10:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:961 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:961 -> [UART, PM25] Uart available, resetting event queue..
19:51:10:981 -> [UART, PM25] Reading data...
19:51:10:982 -> [UART, PM25] Data not available.
19:51:10:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:10:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:10:982 -> [UART, PM25] Uart available, clearing write errors..
19:51:10:982 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:002 -> [UART, PM25] Reading data...
19:51:11:003 -> [UART, PM25] Data not available.
19:51:11:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:003 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:003 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:023 -> [UART, PM25] Reading data...
19:51:11:024 -> [UART, PM25] Data not available.
19:51:11:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:024 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:024 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:044 -> [UART, PM25] Reading data...
19:51:11:045 -> [UART, PM25] Data not available.
19:51:11:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:045 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:045 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:065 -> [UART, PM25] Reading data...
19:51:11:066 -> [UART, PM25] Data not available.
19:51:11:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:066 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:066 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:086 -> [UART, PM25] Reading data...
19:51:11:087 -> [UART, PM25] Data not available.
19:51:11:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:087 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:087 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:107 -> [UART, PM25] Reading data...
19:51:11:108 -> [UART, PM25] Data not available.
19:51:11:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:108 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:108 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:128 -> [UART, PM25] Reading data...
19:51:11:129 -> [UART, PM25] Data not available.
19:51:11:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:129 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:129 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:149 -> [UART, PM25] Reading data...
19:51:11:150 -> [UART, PM25] Data not available.
19:51:11:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:150 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:150 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:170 -> [UART, PM25] Reading data...
19:51:11:171 -> [UART, PM25] Data not available.
19:51:11:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:171 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:171 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:191 -> [UART, PM25] Reading data...
19:51:11:192 -> [UART, PM25] Data not available.
19:51:11:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:192 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:192 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:212 -> [UART, PM25] Reading data...
19:51:11:213 -> [UART, PM25] Data not available.
19:51:11:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:213 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:213 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:233 -> [UART, PM25] Reading data...
19:51:11:234 -> [UART, PM25] Data not available.
19:51:11:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:234 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:234 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:254 -> [UART, PM25] Reading data...
19:51:11:255 -> [UART, PM25] Data not available.
19:51:11:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:255 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:255 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:275 -> [UART, PM25] Reading data...
19:51:11:275 -> [UART, PM25] Data not available.
19:51:11:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:276 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:276 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:296 -> [UART, PM25] Reading data...
19:51:11:297 -> [UART, PM25] Data not available.
19:51:11:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:297 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:297 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:328 -> [UART, PM25] Reading data...
19:51:11:329 -> [UART, PM25] Data not available.
19:51:11:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:329 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:329 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:339 -> [UART, PM25] Reading data...
19:51:11:339 -> [UART, PM25] Data not available.
19:51:11:339 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:339 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:339 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:339 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:359 -> [UART, PM25] Reading data...
19:51:11:360 -> [UART, PM25] Data not available.
19:51:11:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:360 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:360 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:380 -> [UART, PM25] Reading data...
19:51:11:381 -> [UART, PM25] Data not available.
19:51:11:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:381 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:381 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:401 -> [UART, PM25] Reading data...
19:51:11:402 -> [UART, PM25] Data not available.
19:51:11:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:402 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:402 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:422 -> [UART, PM25] Reading data...
19:51:11:423 -> [UART, PM25] Data not available.
19:51:11:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:423 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:423 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:443 -> [UART, PM25] Reading data...
19:51:11:444 -> [UART, PM25] Data not available.
19:51:11:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:444 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:444 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:464 -> [UART, PM25] Reading data...
19:51:11:465 -> [UART, PM25] Data not available.
19:51:11:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:465 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:465 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:486 -> [UART, PM25] Reading data...
19:51:11:486 -> [UART, PM25] Data not available.
19:51:11:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:486 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:486 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:506 -> [UART, PM25] Reading data...
19:51:11:507 -> [UART, PM25] Data not available.
19:51:11:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:507 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:507 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:527 -> [UART, PM25] Reading data...
19:51:11:528 -> [UART, PM25] Data not available.
19:51:11:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:528 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:528 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:548 -> [UART, PM25] Reading data...
19:51:11:549 -> [UART, PM25] Data not available.
19:51:11:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:549 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:549 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:569 -> [UART, PM25] Reading data...
19:51:11:570 -> [UART, PM25] Data not available.
19:51:11:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:570 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:570 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:590 -> [UART, PM25] Reading data...
19:51:11:590 -> [UART, PM25] Data not available.
19:51:11:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:591 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:591 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:611 -> [UART, PM25] Reading data...
19:51:11:612 -> [UART, PM25] Data not available.
19:51:11:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:612 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:612 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:632 -> [UART, PM25] Reading data...
19:51:11:633 -> [UART, PM25] Data not available.
19:51:11:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:633 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:633 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:654 -> [UART, PM25] Reading data...
19:51:11:654 -> [UART, PM25] Data not available.
19:51:11:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:654 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:654 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:674 -> [UART, PM25] Reading data...
19:51:11:675 -> [UART, PM25] Data not available.
19:51:11:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:675 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:675 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:696 -> [UART, PM25] Reading data...
19:51:11:697 -> [UART, PM25] Data not available.
19:51:11:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:697 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:697 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:716 -> [UART, PM25] Reading data...
19:51:11:717 -> [UART, PM25] Data not available.
19:51:11:717 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:717 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:717 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:717 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:737 -> [UART, PM25] Reading data...
19:51:11:737 -> [UART, PM25] Data not available.
19:51:11:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:738 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:738 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:758 -> [UART, PM25] Reading data...
19:51:11:759 -> [UART, PM25] Data not available.
19:51:11:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:759 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:759 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:779 -> [UART, PM25] Reading data...
19:51:11:780 -> [UART, PM25] Data not available.
19:51:11:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:780 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:780 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:800 -> [UART, PM25] Reading data...
19:51:11:801 -> [UART, PM25] Data not available.
19:51:11:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:801 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:801 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:821 -> [UART, PM25] Reading data...
19:51:11:822 -> [UART, PM25] Data not available.
19:51:11:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:822 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:822 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:852 -> [UART, PM25] Reading data...
19:51:11:853 -> [UART, PM25] Data not available.
19:51:11:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:853 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:853 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:863 -> [UART, PM25] Reading data...
19:51:11:864 -> [UART, PM25] Data not available.
19:51:11:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:864 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:864 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:884 -> [UART, PM25] Reading data...
19:51:11:885 -> [UART, PM25] Data not available.
19:51:11:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:885 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:885 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:905 -> [UART, PM25] Reading data...
19:51:11:906 -> [UART, PM25] Data not available.
19:51:11:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:906 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:906 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:926 -> [UART, PM25] Reading data...
19:51:11:927 -> [UART, PM25] Data not available.
19:51:11:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:927 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:927 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:947 -> [UART, PM25] Reading data...
19:51:11:948 -> [UART, PM25] Data not available.
19:51:11:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:948 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:948 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:968 -> [UART, PM25] Reading data...
19:51:11:969 -> [UART, PM25] Data not available.
19:51:11:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:969 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:969 -> [UART, PM25] Uart available, resetting event queue..
19:51:11:989 -> [UART, PM25] Reading data...
19:51:11:990 -> [UART, PM25] Data not available.
19:51:11:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:11:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:11:990 -> [UART, PM25] Uart available, clearing write errors..
19:51:11:990 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:010 -> [UART, PM25] Reading data...
19:51:12:011 -> [UART, PM25] Data not available.
19:51:12:011 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:011 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:011 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:011 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:031 -> [UART, PM25] Reading data...
19:51:12:031 -> [UART, PM25] Data not available.
19:51:12:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:032 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:032 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:052 -> [UART, PM25] Reading data...
19:51:12:053 -> [UART, PM25] Data not available.
19:51:12:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:053 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:053 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:073 -> [UART, PM25] Reading data...
19:51:12:073 -> [UART, PM25] Data not available.
19:51:12:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:074 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:074 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:094 -> [UART, PM25] Reading data...
19:51:12:095 -> [UART, PM25] Data not available.
19:51:12:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:095 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:095 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:115 -> [UART, PM25] Reading data...
19:51:12:116 -> [UART, PM25] Data not available.
19:51:12:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:116 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:116 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:173 -> [UART, PM25] Reading data...
19:51:12:176 -> [UART, PM25] Data not available.
19:51:12:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:176 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:176 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:176 -> [UART, PM25] Reading data...
19:51:12:176 -> [UART, PM25] Data not available.
19:51:12:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:176 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:176 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:178 -> [UART, PM25] Reading data...
19:51:12:178 -> [UART, PM25] Data not available.
19:51:12:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:179 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:179 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:199 -> [UART, PM25] Reading data...
19:51:12:200 -> [UART, PM25] Data not available.
19:51:12:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:200 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:200 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:220 -> [UART, PM25] Reading data...
19:51:12:220 -> [UART, PM25] Data not available.
19:51:12:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:221 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:221 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:241 -> [UART, PM25] Reading data...
19:51:12:242 -> [UART, PM25] Data not available.
19:51:12:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:242 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:242 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:262 -> [UART, PM25] Reading data...
19:51:12:263 -> [UART, PM25] Data not available.
19:51:12:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:263 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:263 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:283 -> [UART, PM25] Reading data...
19:51:12:284 -> [UART, PM25] Data not available.
19:51:12:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:284 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:284 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:304 -> [UART, PM25] Reading data...
19:51:12:305 -> [UART, PM25] Data not available.
19:51:12:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:305 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:305 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:325 -> [UART, PM25] Reading data...
19:51:12:326 -> [UART, PM25] Data not available.
19:51:12:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:326 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:326 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:346 -> [UART, PM25] Reading data...
19:51:12:347 -> [UART, PM25] Data not available.
19:51:12:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:347 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:347 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:376 -> [UART, PM25] Reading data...
19:51:12:377 -> [UART, PM25] Data not available.
19:51:12:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:377 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:377 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:388 -> [UART, PM25] Reading data...
19:51:12:389 -> [UART, PM25] Data not available.
19:51:12:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:389 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:389 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:409 -> [UART, PM25] Reading data...
19:51:12:410 -> [UART, PM25] Data not available.
19:51:12:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:410 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:410 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:430 -> [UART, PM25] Reading data...
19:51:12:431 -> [UART, PM25] Data not available.
19:51:12:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:431 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:431 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:451 -> [UART, PM25] Reading data...
19:51:12:452 -> [UART, PM25] Data not available.
19:51:12:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:452 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:452 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:472 -> [UART, PM25] Reading data...
19:51:12:473 -> [UART, PM25] Data not available.
19:51:12:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:473 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:473 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:493 -> [UART, PM25] Reading data...
19:51:12:493 -> [UART, PM25] Data not available.
19:51:12:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:514 -> [UART, PM25] Reading data...
19:51:12:515 -> [UART, PM25] Data not available.
19:51:12:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:515 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:515 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:535 -> [UART, PM25] Reading data...
19:51:12:536 -> [UART, PM25] Data not available.
19:51:12:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:536 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:536 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:556 -> [UART, PM25] Reading data...
19:51:12:557 -> [UART, PM25] Data not available.
19:51:12:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:557 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:557 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:577 -> [UART, PM25] Reading data...
19:51:12:578 -> [UART, PM25] Data not available.
19:51:12:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:578 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:578 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:598 -> [UART, PM25] Reading data...
19:51:12:599 -> [UART, PM25] Data not available.
19:51:12:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:599 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:599 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:619 -> [UART, PM25] Reading data...
19:51:12:620 -> [UART, PM25] Data not available.
19:51:12:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:620 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:620 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:640 -> [UART, PM25] Reading data...
19:51:12:641 -> [UART, PM25] Data not available.
19:51:12:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:641 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:641 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:661 -> [UART, PM25] Reading data...
19:51:12:662 -> [UART, PM25] Data not available.
19:51:12:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:662 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:662 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:682 -> [UART, PM25] Reading data...
19:51:12:683 -> [UART, PM25] Data not available.
19:51:12:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:683 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:683 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:703 -> [UART, PM25] Reading data...
19:51:12:704 -> [UART, PM25] Data not available.
19:51:12:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:704 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:704 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:724 -> [UART, PM25] Reading data...
19:51:12:725 -> [UART, PM25] Data not available.
19:51:12:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:725 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:725 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:745 -> [UART, PM25] Reading data...
19:51:12:745 -> [UART, PM25] Data not available.
19:51:12:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:766 -> [UART, PM25] Reading data...
19:51:12:767 -> [UART, PM25] Data not available.
19:51:12:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:767 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:767 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:787 -> [UART, PM25] Reading data...
19:51:12:788 -> [UART, PM25] Data not available.
19:51:12:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:788 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:788 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:808 -> [UART, PM25] Reading data...
19:51:12:808 -> [UART, PM25] Data not available.
19:51:12:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:829 -> [UART, PM25] Reading data...
19:51:12:830 -> [UART, PM25] Data not available.
19:51:12:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:830 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:830 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:850 -> [UART, PM25] Reading data...
19:51:12:851 -> [UART, PM25] Data not available.
19:51:12:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:851 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:851 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:871 -> [UART, PM25] Reading data...
19:51:12:872 -> [UART, PM25] Data not available.
19:51:12:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:872 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:872 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:898 -> [UART, PM25] Reading data...
19:51:12:899 -> [UART, PM25] Data not available.
19:51:12:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:899 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:899 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:913 -> [UART, PM25] Reading data...
19:51:12:914 -> [UART, PM25] Data not available.
19:51:12:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:914 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:914 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:934 -> [UART, PM25] Reading data...
19:51:12:935 -> [UART, PM25] Data not available.
19:51:12:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:935 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:935 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:955 -> [UART, PM25] Reading data...
19:51:12:956 -> [UART, PM25] Data not available.
19:51:12:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:956 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:956 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:976 -> [UART, PM25] Reading data...
19:51:12:977 -> [UART, PM25] Data not available.
19:51:12:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:977 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:977 -> [UART, PM25] Uart available, resetting event queue..
19:51:12:997 -> [UART, PM25] Reading data...
19:51:12:998 -> [UART, PM25] Data not available.
19:51:12:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:12:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:12:998 -> [UART, PM25] Uart available, clearing write errors..
19:51:12:998 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:018 -> [UART, PM25] Reading data...
19:51:13:019 -> [UART, PM25] Data not available.
19:51:13:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:019 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:019 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:039 -> [UART, PM25] Reading data...
19:51:13:040 -> [UART, PM25] Data not available.
19:51:13:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:040 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:040 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:060 -> [UART, PM25] Reading data...
19:51:13:060 -> [UART, PM25] Data not available.
19:51:13:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:060 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:060 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:081 -> [UART, PM25] Reading data...
19:51:13:082 -> [UART, PM25] Data not available.
19:51:13:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:082 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:082 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:102 -> [UART, PM25] Reading data...
19:51:13:103 -> [UART, PM25] Data not available.
19:51:13:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:103 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:103 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:123 -> [UART, PM25] Reading data...
19:51:13:124 -> [UART, PM25] Data not available.
19:51:13:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:124 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:124 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:144 -> [UART, PM25] Reading data...
19:51:13:145 -> [UART, PM25] Data not available.
19:51:13:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:145 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:145 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:165 -> [UART, PM25] Reading data...
19:51:13:166 -> [UART, PM25] Data not available.
19:51:13:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:166 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:166 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:186 -> [UART, PM25] Reading data...
19:51:13:187 -> [UART, PM25] Data not available.
19:51:13:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:187 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:187 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:207 -> [UART, PM25] Reading data...
19:51:13:208 -> [UART, PM25] Data not available.
19:51:13:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:208 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:208 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:228 -> [UART, PM25] Reading data...
19:51:13:229 -> [UART, PM25] Data not available.
19:51:13:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:229 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:229 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:249 -> [UART, PM25] Reading data...
19:51:13:250 -> [UART, PM25] Data not available.
19:51:13:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:250 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:250 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:270 -> [UART, PM25] Reading data...
19:51:13:271 -> [UART, PM25] Data not available.
19:51:13:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:271 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:271 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:291 -> [UART, PM25] Reading data...
19:51:13:292 -> [UART, PM25] Data not available.
19:51:13:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:292 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:292 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:312 -> [UART, PM25] Reading data...
19:51:13:313 -> [UART, PM25] Data not available.
19:51:13:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:313 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:313 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:333 -> [UART, PM25] Reading data...
19:51:13:334 -> [UART, PM25] Data not available.
19:51:13:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:334 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:334 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:354 -> [UART, PM25] Reading data...
19:51:13:355 -> [UART, PM25] Data not available.
19:51:13:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:355 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:355 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:375 -> [UART, PM25] Reading data...
19:51:13:376 -> [UART, PM25] Data not available.
19:51:13:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:376 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:376 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:397 -> [UART, PM25] Reading data...
19:51:13:397 -> [UART, PM25] Data not available.
19:51:13:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:397 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:397 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:418 -> [UART, PM25] Reading data...
19:51:13:418 -> [UART, PM25] Data not available.
19:51:13:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:418 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:418 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:438 -> [UART, PM25] Reading data...
19:51:13:439 -> [UART, PM25] Data not available.
19:51:13:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:439 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:439 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:459 -> [UART, PM25] Reading data...
19:51:13:460 -> [UART, PM25] Data not available.
19:51:13:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:460 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:460 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:480 -> [UART, PM25] Reading data...
19:51:13:481 -> [UART, PM25] Data not available.
19:51:13:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:481 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:481 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:501 -> [UART, PM25] Reading data...
19:51:13:502 -> [UART, PM25] Data not available.
19:51:13:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:502 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:502 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:522 -> [UART, PM25] Reading data...
19:51:13:523 -> [UART, PM25] Data not available.
19:51:13:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:523 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:523 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:543 -> [UART, PM25] Reading data...
19:51:13:544 -> [UART, PM25] Data not available.
19:51:13:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:544 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:544 -> [UART, PM25] Uart available, resetting event queue..

19:51:13:565 -> [UART, PM25] Data not available.
19:51:13:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:565 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:565 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:564 -> [UART, PM25] Reading data...19:51:13:586 -> [UART, PM25] Reading data...
19:51:13:586 -> [UART, PM25] Data not available.
19:51:13:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:586 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:586 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:607 -> [UART, PM25] Reading data...
19:51:13:607 -> [UART, PM25] Data not available.
19:51:13:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:607 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:607 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:627 -> [UART, PM25] Reading data...
19:51:13:627 -> [UART, PM25] Data not available.
19:51:13:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:628 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:628 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:648 -> [UART, PM25] Reading data...
19:51:13:649 -> [UART, PM25] Data not available.
19:51:13:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:649 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:649 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:669 -> [UART, PM25] Reading data...
19:51:13:670 -> [UART, PM25] Data not available.
19:51:13:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:670 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:670 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:690 -> [UART, PM25] Reading data...
19:51:13:691 -> [UART, PM25] Data not available.
19:51:13:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:711 -> [UART, PM25] Reading data...
19:51:13:712 -> [UART, PM25] Data not available.
19:51:13:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:712 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:712 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:732 -> [UART, PM25] Reading data...
19:51:13:733 -> [UART, PM25] Data not available.
19:51:13:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:733 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:733 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:754 -> [UART, PM25] Reading data...
19:51:13:754 -> [UART, PM25] Data not available.
19:51:13:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:754 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:754 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:774 -> [UART, PM25] Reading data...
19:51:13:775 -> [UART, PM25] Data not available.
19:51:13:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:775 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:775 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:795 -> [UART, PM25] Reading data...
19:51:13:796 -> [UART, PM25] Data not available.
19:51:13:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:796 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:796 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:816 -> [UART, PM25] Reading data...
19:51:13:817 -> [UART, PM25] Data not available.
19:51:13:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:817 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:817 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:837 -> [UART, PM25] Reading data...
19:51:13:838 -> [UART, PM25] Data not available.
19:51:13:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:838 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:838 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:859 -> [UART, PM25] Reading data...
19:51:13:859 -> [UART, PM25] Data not available.
19:51:13:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:859 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:859 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:879 -> [UART, PM25] Reading data...
19:51:13:880 -> [UART, PM25] Data not available.
19:51:13:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:880 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:880 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:900 -> [UART, PM25] Reading data...
19:51:13:902 -> [UART, PM25] Data not available.
19:51:13:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:902 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:902 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:937 -> [UART, PM25] Reading data...
19:51:13:937 -> [UART, PM25] Data not available.
19:51:13:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:937 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:937 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:942 -> [UART, PM25] Reading data...
19:51:13:942 -> [UART, PM25] Data not available.
19:51:13:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:942 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:942 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:963 -> [UART, PM25] Reading data...
19:51:13:965 -> [UART, PM25] Data not available.
19:51:13:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:965 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:965 -> [UART, PM25] Uart available, resetting event queue..
19:51:13:984 -> [UART, PM25] Reading data...
19:51:13:985 -> [UART, PM25] Data not available.
19:51:13:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:13:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:13:985 -> [UART, PM25] Uart available, clearing write errors..
19:51:13:985 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:006 -> [UART, PM25] Reading data...
19:51:14:006 -> [UART, PM25] Data not available.
19:51:14:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:006 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:006 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:026 -> [UART, PM25] Reading data...
19:51:14:027 -> [UART, PM25] Data not available.
19:51:14:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:027 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:027 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:048 -> [UART, PM25] Reading data...
19:51:14:067 -> [UART, PM25] Data not available.
19:51:14:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:067 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:067 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:075 -> [UART, PM25] Reading data...
19:51:14:075 -> [UART, PM25] Data not available.
19:51:14:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:075 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:075 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:089 -> [UART, PM25] Reading data...
19:51:14:090 -> [UART, PM25] Data not available.
19:51:14:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:090 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:090 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:110 -> [UART, PM25] Reading data...
19:51:14:111 -> [UART, PM25] Data not available.
19:51:14:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:111 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:111 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:131 -> [UART, PM25] Reading data...
19:51:14:131 -> [UART, PM25] Data not available.
19:51:14:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:132 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:132 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:152 -> [UART, PM25] Reading data...
19:51:14:153 -> [UART, PM25] Data not available.
19:51:14:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:153 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:153 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:173 -> [UART, PM25] Reading data...
19:51:14:173 -> [UART, PM25] Data not available.
19:51:14:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:174 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:174 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:194 -> [UART, PM25] Reading data...
19:51:14:194 -> [UART, PM25] Data not available.
19:51:14:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:194 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:194 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:215 -> [UART, PM25] Reading data...
19:51:14:216 -> [UART, PM25] Data not available.
19:51:14:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:216 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:216 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:236 -> [UART, PM25] Reading data...
19:51:14:237 -> [UART, PM25] Data not available.
19:51:14:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:237 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:237 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:257 -> [UART, PM25] Reading data...
19:51:14:258 -> [UART, PM25] Data not available.
19:51:14:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:258 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:258 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:278 -> [UART, PM25] Reading data...
19:51:14:279 -> [UART, PM25] Data not available.
19:51:14:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:279 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:279 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:299 -> [UART, PM25] Reading data...
19:51:14:300 -> [UART, PM25] Data not available.
19:51:14:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:300 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:300 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:321 -> [UART, PM25] Reading data...
19:51:14:321 -> [UART, PM25] Data not available.
19:51:14:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:321 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:321 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:341 -> [UART, PM25] Reading data...
19:51:14:342 -> [UART, PM25] Data not available.
19:51:14:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:342 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:342 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:362 -> [UART, PM25] Reading data...
19:51:14:363 -> [UART, PM25] Data not available.
19:51:14:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:363 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:363 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:383 -> [UART, PM25] Reading data...
19:51:14:384 -> [UART, PM25] Data not available.
19:51:14:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:384 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:384 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:404 -> [UART, PM25] Reading data...
19:51:14:405 -> [UART, PM25] Data not available.
19:51:14:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:405 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:405 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:425 -> [UART, PM25] Reading data...
19:51:14:425 -> [UART, PM25] Data not available.
19:51:14:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:429 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:429 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:429 -> PING!
19:51:14:639 -> [UART, PM25] Reading data...
19:51:14:640 -> [UART, PM25] Data not available.
19:51:14:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:660 -> [UART, PM25] Reading data...
19:51:14:661 -> [UART, PM25] Data not available.
19:51:14:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:661 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:661 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:681 -> [UART, PM25] Reading data...
19:51:14:682 -> [UART, PM25] Data not available.
19:51:14:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:706 -> [UART, PM25] Reading data...
19:51:14:706 -> [UART, PM25] Data not available.
19:51:14:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:706 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:706 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:724 -> [UART, PM25] Reading data...
19:51:14:724 -> [UART, PM25] Data not available.
19:51:14:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:744 -> [UART, PM25] Reading data...
19:51:14:745 -> [UART, PM25] Data not available.
19:51:14:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:765 -> [UART, PM25] Reading data...
19:51:14:766 -> [UART, PM25] Data not available.
19:51:14:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:786 -> [UART, PM25] Reading data...
19:51:14:787 -> [UART, PM25] Data not available.
19:51:14:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:787 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:787 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:807 -> [UART, PM25] Reading data...
19:51:14:808 -> [UART, PM25] Data not available.
19:51:14:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:828 -> [UART, PM25] Reading data...
19:51:14:829 -> [UART, PM25] Data not available.
19:51:14:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:850 -> [UART, PM25] Reading data...
19:51:14:850 -> [UART, PM25] Data not available.
19:51:14:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:850 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:850 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:870 -> [UART, PM25] Reading data...
19:51:14:871 -> [UART, PM25] Data not available.
19:51:14:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:871 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:871 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:897 -> [UART, PM25] Reading data...
19:51:14:897 -> [UART, PM25] Data not available.
19:51:14:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:923 -> [UART, PM25] Reading data...
19:51:14:924 -> [UART, PM25] Data not available.
19:51:14:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:924 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:924 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:937 -> [UART, PM25] Reading data...
19:51:14:937 -> [UART, PM25] Data not available.
19:51:14:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:937 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:937 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:967 -> [UART, PM25] Reading data...
19:51:14:969 -> [UART, PM25] Data not available.
19:51:14:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:969 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:969 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:975 -> [UART, PM25] Reading data...
19:51:14:975 -> [UART, PM25] Data not available.
19:51:14:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:976 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:976 -> [UART, PM25] Uart available, resetting event queue..
19:51:14:996 -> [UART, PM25] Reading data...
19:51:14:997 -> [UART, PM25] Data not available.
19:51:14:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:14:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:14:997 -> [UART, PM25] Uart available, clearing write errors..
19:51:14:997 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:017 -> [UART, PM25] Reading data...
19:51:15:018 -> [UART, PM25] Data not available.
19:51:15:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:018 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:018 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:038 -> [UART, PM25] Reading data...
19:51:15:039 -> [UART, PM25] Data not available.
19:51:15:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:039 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:039 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:059 -> [UART, PM25] Reading data...
19:51:15:060 -> [UART, PM25] Data not available.
19:51:15:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:060 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:060 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:080 -> [UART, PM25] Reading data...
19:51:15:081 -> [UART, PM25] Data not available.
19:51:15:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:081 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:081 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:101 -> [UART, PM25] Reading data...
19:51:15:102 -> [UART, PM25] Data not available.
19:51:15:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:102 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:102 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:122 -> [UART, PM25] Reading data...
19:51:15:123 -> [UART, PM25] Data not available.
19:51:15:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:123 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:123 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:143 -> [UART, PM25] Reading data...
19:51:15:144 -> [UART, PM25] Data not available.
19:51:15:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:144 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:144 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:164 -> [UART, PM25] Reading data...
19:51:15:165 -> [UART, PM25] Data not available.
19:51:15:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:165 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:165 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:185 -> [UART, PM25] Reading data...
19:51:15:186 -> [UART, PM25] Data not available.
19:51:15:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:186 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:186 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:206 -> [UART, PM25] Reading data...
19:51:15:207 -> [UART, PM25] Data not available.
19:51:15:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:207 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:207 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:227 -> [UART, PM25] Reading data...
19:51:15:228 -> [UART, PM25] Data not available.
19:51:15:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:228 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:228 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:248 -> [UART, PM25] Reading data...
19:51:15:249 -> [UART, PM25] Data not available.
19:51:15:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:249 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:249 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:269 -> [UART, PM25] Reading data...
19:51:15:270 -> [UART, PM25] Data not available.
19:51:15:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:270 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:270 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:290 -> [UART, PM25] Reading data...
19:51:15:291 -> [UART, PM25] Data not available.
19:51:15:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:291 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:291 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:311 -> [UART, PM25] Reading data...
19:51:15:312 -> [UART, PM25] Data not available.
19:51:15:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:312 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:312 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:333 -> [UART, PM25] Reading data...
19:51:15:333 -> [UART, PM25] Data not available.
19:51:15:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:333 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:333 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:353 -> [UART, PM25] Reading data...
19:51:15:354 -> [UART, PM25] Data not available.
19:51:15:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:354 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:354 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:374 -> [UART, PM25] Reading data...
19:51:15:375 -> [UART, PM25] Data not available.
19:51:15:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:375 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:375 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:395 -> [UART, PM25] Reading data...
19:51:15:396 -> [UART, PM25] Data not available.
19:51:15:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:396 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:396 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:416 -> [UART, PM25] Reading data...
19:51:15:417 -> [UART, PM25] Data not available.
19:51:15:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:417 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:417 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:437 -> [UART, PM25] Reading data...
19:51:15:438 -> [UART, PM25] Data not available.
19:51:15:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:438 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:438 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:458 -> [UART, PM25] Reading data...
19:51:15:459 -> [UART, PM25] Data not available.
19:51:15:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:459 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:459 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:491 -> [UART, PM25] Reading data...
19:51:15:492 -> [UART, PM25] Data not available.
19:51:15:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:492 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:492 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:501 -> [UART, PM25] Reading data...
19:51:15:501 -> [UART, PM25] Data not available.
19:51:15:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:501 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:501 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:521 -> [UART, PM25] Reading data...
19:51:15:522 -> [UART, PM25] Data not available.
19:51:15:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:522 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:522 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:542 -> [UART, PM25] Reading data...
19:51:15:543 -> [UART, PM25] Data not available.
19:51:15:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:543 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:543 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:563 -> [UART, PM25] Reading data...
19:51:15:564 -> [UART, PM25] Data not available.
19:51:15:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:564 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:564 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:584 -> [UART, PM25] Reading data...
19:51:15:585 -> [UART, PM25] Data not available.
19:51:15:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:585 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:585 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:605 -> [UART, PM25] Reading data...
19:51:15:606 -> [UART, PM25] Data not available.
19:51:15:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:606 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:606 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:626 -> [UART, PM25] Reading data...
19:51:15:627 -> [UART, PM25] Data not available.
19:51:15:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:627 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:627 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:647 -> [UART, PM25] Reading data...
19:51:15:648 -> [UART, PM25] Data not available.
19:51:15:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:648 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:648 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:668 -> [UART, PM25] Reading data...
19:51:15:669 -> [UART, PM25] Data not available.
19:51:15:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:669 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:669 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:689 -> [UART, PM25] Reading data...
19:51:15:690 -> [UART, PM25] Data not available.
19:51:15:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:690 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:690 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:710 -> [UART, PM25] Reading data...
19:51:15:711 -> [UART, PM25] Data not available.
19:51:15:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:711 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:711 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:731 -> [UART, PM25] Reading data...
19:51:15:731 -> [UART, PM25] Data not available.
19:51:15:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:732 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:732 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:752 -> [UART, PM25] Reading data...
19:51:15:753 -> [UART, PM25] Data not available.
19:51:15:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:753 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:753 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:773 -> [UART, PM25] Reading data...
19:51:15:774 -> [UART, PM25] Data not available.
19:51:15:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:774 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:774 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:794 -> [UART, PM25] Reading data...
19:51:15:795 -> [UART, PM25] Data not available.
19:51:15:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:795 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:795 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:815 -> [UART, PM25] Reading data...
19:51:15:816 -> [UART, PM25] Data not available.
19:51:15:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:816 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:816 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:836 -> [UART, PM25] Reading data...
19:51:15:837 -> [UART, PM25] Data not available.
19:51:15:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:837 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:837 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:857 -> [UART, PM25] Reading data...
19:51:15:858 -> [UART, PM25] Data not available.
19:51:15:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:858 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:858 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:878 -> [UART, PM25] Reading data...
19:51:15:879 -> [UART, PM25] Data not available.
19:51:15:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:879 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:879 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:899 -> [UART, PM25] Reading data...
19:51:15:900 -> [UART, PM25] Data not available.
19:51:15:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:900 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:900 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:920 -> [UART, PM25] Reading data...
19:51:15:921 -> [UART, PM25] Data not available.
19:51:15:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:921 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:921 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:941 -> [UART, PM25] Reading data...
19:51:15:942 -> [UART, PM25] Data not available.
19:51:15:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:942 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:942 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:962 -> [UART, PM25] Reading data...
19:51:15:963 -> [UART, PM25] Data not available.
19:51:15:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:963 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:963 -> [UART, PM25] Uart available, resetting event queue..
19:51:15:983 -> [UART, PM25] Reading data...
19:51:15:984 -> [UART, PM25] Data not available.
19:51:15:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:15:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:15:984 -> [UART, PM25] Uart available, clearing write errors..
19:51:15:984 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:013 -> [UART, PM25] Reading data...
19:51:16:014 -> [UART, PM25] Data not available.
19:51:16:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:014 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:014 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:026 -> [UART, PM25] Reading data...
19:51:16:026 -> [UART, PM25] Data not available.
19:51:16:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:026 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:026 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:046 -> [UART, PM25] Reading data...
19:51:16:047 -> [UART, PM25] Data not available.
19:51:16:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:047 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:047 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:067 -> [UART, PM25] Reading data...
19:51:16:068 -> [UART, PM25] Data not available.
19:51:16:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:068 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:068 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:088 -> [UART, PM25] Reading data...
19:51:16:089 -> [UART, PM25] Data not available.
19:51:16:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:089 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:089 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:109 -> [UART, PM25] Reading data...
19:51:16:110 -> [UART, PM25] Data not available.
19:51:16:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:110 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:110 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:130 -> [UART, PM25] Reading data...
19:51:16:131 -> [UART, PM25] Data not available.
19:51:16:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:131 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:131 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:151 -> [UART, PM25] Reading data...
19:51:16:152 -> [UART, PM25] Data not available.
19:51:16:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:152 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:152 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:172 -> [UART, PM25] Reading data...
19:51:16:172 -> [UART, PM25] Data not available.
19:51:16:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:173 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:173 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:193 -> [UART, PM25] Reading data...
19:51:16:194 -> [UART, PM25] Data not available.
19:51:16:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:194 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:194 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:214 -> [UART, PM25] Reading data...
19:51:16:215 -> [UART, PM25] Data not available.
19:51:16:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:215 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:215 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:235 -> [UART, PM25] Reading data...
19:51:16:235 -> [UART, PM25] Data not available.
19:51:16:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:235 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:235 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:256 -> [UART, PM25] Reading data...
19:51:16:258 -> [UART, PM25] Data not available.
19:51:16:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:258 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:258 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:277 -> [UART, PM25] Reading data...
19:51:16:278 -> [UART, PM25] Data not available.
19:51:16:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:298 -> [UART, PM25] Reading data...
19:51:16:299 -> [UART, PM25] Data not available.
19:51:16:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:299 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:299 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:319 -> [UART, PM25] Reading data...
19:51:16:320 -> [UART, PM25] Data not available.
19:51:16:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:320 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:320 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:340 -> [UART, PM25] Reading data...
19:51:16:341 -> [UART, PM25] Data not available.
19:51:16:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:341 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:341 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:361 -> [UART, PM25] Reading data...
19:51:16:362 -> [UART, PM25] Data not available.
19:51:16:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:362 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:362 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:382 -> [UART, PM25] Reading data...
19:51:16:383 -> [UART, PM25] Data not available.
19:51:16:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:383 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:383 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:403 -> [UART, PM25] Reading data...
19:51:16:404 -> [UART, PM25] Data not available.
19:51:16:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:404 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:404 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:424 -> [UART, PM25] Reading data...
19:51:16:424 -> [UART, PM25] Data not available.
19:51:16:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:425 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:425 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:445 -> [UART, PM25] Reading data...
19:51:16:446 -> [UART, PM25] Data not available.
19:51:16:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:446 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:446 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:467 -> [UART, PM25] Reading data...
19:51:16:467 -> [UART, PM25] Data not available.
19:51:16:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:467 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:467 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:487 -> [UART, PM25] Reading data...
19:51:16:488 -> [UART, PM25] Data not available.
19:51:16:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:488 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:488 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:508 -> [UART, PM25] Reading data...
19:51:16:509 -> [UART, PM25] Data not available.
19:51:16:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:509 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:509 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:531 -> [UART, PM25] Reading data...
19:51:16:531 -> [UART, PM25] Data not available.
19:51:16:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:531 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:531 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:550 -> [UART, PM25] Reading data...
19:51:16:550 -> [UART, PM25] Data not available.
19:51:16:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:551 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:551 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:572 -> [UART, PM25] Reading data...
19:51:16:598 -> [UART, PM25] Data not available.
19:51:16:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:598 -> [UART, PM25] Reading data...
19:51:16:598 -> [UART, PM25] Data not available.
19:51:16:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:613 -> [UART, PM25] Reading data...
19:51:16:614 -> [UART, PM25] Data not available.
19:51:16:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:614 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:614 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:634 -> [UART, PM25] Reading data...
19:51:16:634 -> [UART, PM25] Data not available.
19:51:16:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:634 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:634 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:655 -> [UART, PM25] Reading data...
19:51:16:656 -> [UART, PM25] Data not available.
19:51:16:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:656 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:656 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:676 -> [UART, PM25] Reading data...
19:51:16:677 -> [UART, PM25] Data not available.
19:51:16:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:677 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:677 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:697 -> [UART, PM25] Reading data...
19:51:16:698 -> [UART, PM25] Data not available.
19:51:16:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:698 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:698 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:719 -> [UART, PM25] Reading data...
19:51:16:719 -> [UART, PM25] Data not available.
19:51:16:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:719 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:719 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:739 -> [UART, PM25] Reading data...
19:51:16:739 -> [UART, PM25] Data not available.
19:51:16:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:740 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:740 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:760 -> [UART, PM25] Reading data...
19:51:16:761 -> [UART, PM25] Data not available.
19:51:16:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:761 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:761 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:781 -> [UART, PM25] Reading data...
19:51:16:782 -> [UART, PM25] Data not available.
19:51:16:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:782 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:782 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:802 -> [UART, PM25] Reading data...
19:51:16:803 -> [UART, PM25] Data not available.
19:51:16:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:803 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:803 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:823 -> [UART, PM25] Reading data...
19:51:16:823 -> [UART, PM25] Data not available.
19:51:16:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:824 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:824 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:844 -> [UART, PM25] Reading data...
19:51:16:845 -> [UART, PM25] Data not available.
19:51:16:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:845 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:845 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:865 -> [UART, PM25] Reading data...
19:51:16:866 -> [UART, PM25] Data not available.
19:51:16:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:866 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:866 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:886 -> [UART, PM25] Reading data...
19:51:16:887 -> [UART, PM25] Data not available.
19:51:16:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:887 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:887 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:907 -> [UART, PM25] Reading data...
19:51:16:908 -> [UART, PM25] Data not available.
19:51:16:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:908 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:908 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:928 -> [UART, PM25] Reading data...
19:51:16:929 -> [UART, PM25] Data not available.
19:51:16:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:929 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:929 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:949 -> [UART, PM25] Reading data...
19:51:16:950 -> [UART, PM25] Data not available.
19:51:16:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:950 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:950 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:971 -> [UART, PM25] Reading data...
19:51:16:971 -> [UART, PM25] Data not available.
19:51:16:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:971 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:971 -> [UART, PM25] Uart available, resetting event queue..
19:51:16:991 -> [UART, PM25] Reading data...
19:51:16:992 -> [UART, PM25] Data not available.
19:51:16:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:16:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:16:992 -> [UART, PM25] Uart available, clearing write errors..
19:51:16:992 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:012 -> [UART, PM25] Reading data...
19:51:17:012 -> [UART, PM25] Data not available.
19:51:17:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:013 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:013 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:045 -> [UART, PM25] Reading data...
19:51:17:046 -> [UART, PM25] Data not available.
19:51:17:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:046 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:046 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:054 -> [UART, PM25] Reading data...
19:51:17:055 -> [UART, PM25] Data not available.
19:51:17:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:055 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:055 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:075 -> [UART, PM25] Reading data...
19:51:17:076 -> [UART, PM25] Data not available.
19:51:17:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:076 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:076 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:096 -> [UART, PM25] Reading data...
19:51:17:096 -> [UART, PM25] Data not available.
19:51:17:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:097 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:097 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:117 -> [UART, PM25] Reading data...
19:51:17:118 -> [UART, PM25] Data not available.
19:51:17:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:118 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:118 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:138 -> [UART, PM25] Reading data...
19:51:17:139 -> [UART, PM25] Data not available.
19:51:17:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:139 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:139 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:159 -> [UART, PM25] Reading data...
19:51:17:160 -> [UART, PM25] Data not available.
19:51:17:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:160 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:160 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:180 -> [UART, PM25] Reading data...
19:51:17:181 -> [UART, PM25] Data not available.
19:51:17:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:181 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:181 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:201 -> [UART, PM25] Reading data...
19:51:17:202 -> [UART, PM25] Data not available.
19:51:17:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:202 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:202 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:222 -> [UART, PM25] Reading data...
19:51:17:223 -> [UART, PM25] Data not available.
19:51:17:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:223 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:223 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:243 -> [UART, PM25] Reading data...
19:51:17:244 -> [UART, PM25] Data not available.
19:51:17:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:244 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:244 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:264 -> [UART, PM25] Reading data...
19:51:17:265 -> [UART, PM25] Data not available.
19:51:17:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:265 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:265 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:285 -> [UART, PM25] Reading data...
19:51:17:286 -> [UART, PM25] Data not available.
19:51:17:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:286 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:286 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:306 -> [UART, PM25] Reading data...
19:51:17:307 -> [UART, PM25] Data not available.
19:51:17:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:307 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:307 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:327 -> [UART, PM25] Reading data...
19:51:17:328 -> [UART, PM25] Data not available.
19:51:17:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:328 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:328 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:348 -> [UART, PM25] Reading data...
19:51:17:349 -> [UART, PM25] Data not available.
19:51:17:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:349 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:349 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:369 -> [UART, PM25] Reading data...
19:51:17:370 -> [UART, PM25] Data not available.
19:51:17:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:370 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:370 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:390 -> [UART, PM25] Reading data...
19:51:17:391 -> [UART, PM25] Data not available.
19:51:17:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:391 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:391 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:411 -> [UART, PM25] Reading data...
19:51:17:412 -> [UART, PM25] Data not available.
19:51:17:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:412 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:412 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:432 -> [UART, PM25] Reading data...
19:51:17:433 -> [UART, PM25] Data not available.
19:51:17:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:433 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:433 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:453 -> [UART, PM25] Reading data...
19:51:17:454 -> [UART, PM25] Data not available.
19:51:17:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:454 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:454 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:474 -> [UART, PM25] Reading data...
19:51:17:475 -> [UART, PM25] Data not available.
19:51:17:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:475 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:475 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:495 -> [UART, PM25] Reading data...
19:51:17:496 -> [UART, PM25] Data not available.
19:51:17:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:496 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:496 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:516 -> [UART, PM25] Reading data...
19:51:17:517 -> [UART, PM25] Data not available.
19:51:17:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:517 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:517 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:537 -> [UART, PM25] Reading data...
19:51:17:538 -> [UART, PM25] Data not available.
19:51:17:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:538 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:538 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:562 -> [UART, PM25] Reading data...
19:51:17:562 -> [UART, PM25] Data not available.
19:51:17:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:562 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:562 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:579 -> [UART, PM25] Reading data...
19:51:17:579 -> [UART, PM25] Data not available.
19:51:17:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:580 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:580 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:600 -> [UART, PM25] Reading data...
19:51:17:601 -> [UART, PM25] Data not available.
19:51:17:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:621 -> [UART, PM25] Reading data...
19:51:17:622 -> [UART, PM25] Data not available.
19:51:17:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:622 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:622 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:642 -> [UART, PM25] Reading data...
19:51:17:643 -> [UART, PM25] Data not available.
19:51:17:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:643 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:643 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:663 -> [UART, PM25] Reading data...
19:51:17:664 -> [UART, PM25] Data not available.
19:51:17:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:664 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:664 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:684 -> [UART, PM25] Reading data...
19:51:17:690 -> [UART, PM25] Data not available.
19:51:17:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:690 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:690 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:705 -> [UART, PM25] Reading data...
19:51:17:706 -> [UART, PM25] Data not available.
19:51:17:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:706 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:706 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:726 -> [UART, PM25] Reading data...
19:51:17:726 -> [UART, PM25] Data not available.
19:51:17:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:726 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:726 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:747 -> [UART, PM25] Reading data...
19:51:17:748 -> [UART, PM25] Data not available.
19:51:17:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:748 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:748 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:768 -> [UART, PM25] Reading data...
19:51:17:769 -> [UART, PM25] Data not available.
19:51:17:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:769 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:769 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:789 -> [UART, PM25] Reading data...
19:51:17:790 -> [UART, PM25] Data not available.
19:51:17:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:790 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:790 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:810 -> [UART, PM25] Reading data...
19:51:17:811 -> [UART, PM25] Data not available.
19:51:17:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:811 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:811 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:831 -> [UART, PM25] Reading data...
19:51:17:832 -> [UART, PM25] Data not available.
19:51:17:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:832 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:832 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:852 -> [UART, PM25] Reading data...
19:51:17:853 -> [UART, PM25] Data not available.
19:51:17:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:853 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:853 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:873 -> [UART, PM25] Reading data...
19:51:17:873 -> [UART, PM25] Data not available.
19:51:17:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:874 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:874 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:894 -> [UART, PM25] Reading data...
19:51:17:895 -> [UART, PM25] Data not available.
19:51:17:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:895 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:895 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:915 -> [UART, PM25] Reading data...
19:51:17:915 -> [UART, PM25] Data not available.
19:51:17:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:916 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:916 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:936 -> [UART, PM25] Reading data...
19:51:17:937 -> [UART, PM25] Data not available.
19:51:17:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:937 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:937 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:957 -> [UART, PM25] Reading data...
19:51:17:958 -> [UART, PM25] Data not available.
19:51:17:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:958 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:958 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:978 -> [UART, PM25] Reading data...
19:51:17:979 -> [UART, PM25] Data not available.
19:51:17:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:17:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:17:979 -> [UART, PM25] Uart available, clearing write errors..
19:51:17:979 -> [UART, PM25] Uart available, resetting event queue..
19:51:17:999 -> [UART, PM25] Reading data...
19:51:18:000 -> [UART, PM25] Data not available.
19:51:18:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:000 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:000 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:020 -> [UART, PM25] Reading data...
19:51:18:021 -> [UART, PM25] Data not available.
19:51:18:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:021 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:021 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:041 -> [UART, PM25] Reading data...
19:51:18:042 -> [UART, PM25] Data not available.
19:51:18:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:042 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:042 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:072 -> [UART, PM25] Reading data...
19:51:18:073 -> [UART, PM25] Data not available.
19:51:18:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:083 -> [UART, PM25] Reading data...
19:51:18:084 -> [UART, PM25] Data not available.
19:51:18:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:084 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:084 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:105 -> [UART, PM25] Reading data...
19:51:18:105 -> [UART, PM25] Data not available.
19:51:18:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:105 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:105 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:125 -> [UART, PM25] Reading data...
19:51:18:126 -> [UART, PM25] Data not available.
19:51:18:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:126 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:126 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:146 -> [UART, PM25] Reading data...
19:51:18:147 -> [UART, PM25] Data not available.
19:51:18:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:147 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:147 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:167 -> [UART, PM25] Reading data...
19:51:18:167 -> [UART, PM25] Data not available.
19:51:18:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:167 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:167 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:188 -> [UART, PM25] Reading data...
19:51:18:189 -> [UART, PM25] Data not available.
19:51:18:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:189 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:189 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:224 -> [UART, PM25] Reading data...
19:51:18:240 -> [UART, PM25] Data not available.
19:51:18:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:240 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:240 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:240 -> [UART, PM25] Reading data...
19:51:18:240 -> [UART, PM25] Data not available.
19:51:18:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:240 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:240 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:251 -> [UART, PM25] Reading data...
19:51:18:252 -> [UART, PM25] Data not available.
19:51:18:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:252 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:252 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:272 -> [UART, PM25] Reading data...
19:51:18:273 -> [UART, PM25] Data not available.
19:51:18:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:273 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:273 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:293 -> [UART, PM25] Reading data...
19:51:18:294 -> [UART, PM25] Data not available.
19:51:18:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:294 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:294 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:314 -> [UART, PM25] Reading data...
19:51:18:315 -> [UART, PM25] Data not available.
19:51:18:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:315 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:315 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:335 -> [UART, PM25] Reading data...
19:51:18:336 -> [UART, PM25] Data not available.
19:51:18:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:336 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:336 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:356 -> [UART, PM25] Reading data...
19:51:18:356 -> [UART, PM25] Data not available.
19:51:18:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:356 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:356 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:377 -> [UART, PM25] Reading data...
19:51:18:378 -> [UART, PM25] Data not available.
19:51:18:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:378 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:378 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:398 -> [UART, PM25] Reading data...
19:51:18:399 -> [UART, PM25] Data not available.
19:51:18:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:399 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:399 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:419 -> [UART, PM25] Reading data...
19:51:18:420 -> [UART, PM25] Data not available.
19:51:18:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:420 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:420 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:440 -> [UART, PM25] Reading data...
19:51:18:441 -> [UART, PM25] Data not available.
19:51:18:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:441 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:441 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:461 -> [UART, PM25] Reading data...
19:51:18:462 -> [UART, PM25] Data not available.
19:51:18:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:462 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:462 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:482 -> [UART, PM25] Reading data...
19:51:18:482 -> [UART, PM25] Data not available.
19:51:18:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:483 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:483 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:503 -> [UART, PM25] Reading data...
19:51:18:504 -> [UART, PM25] Data not available.
19:51:18:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:504 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:504 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:524 -> [UART, PM25] Reading data...
19:51:18:525 -> [UART, PM25] Data not available.
19:51:18:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:525 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:525 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:545 -> [UART, PM25] Reading data...
19:51:18:545 -> [UART, PM25] Data not available.
19:51:18:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:546 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:546 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:566 -> [UART, PM25] Reading data...
19:51:18:567 -> [UART, PM25] Data not available.
19:51:18:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:567 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:567 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:587 -> [UART, PM25] Reading data...
19:51:18:588 -> [UART, PM25] Data not available.
19:51:18:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:588 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:588 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:608 -> [UART, PM25] Reading data...
19:51:18:609 -> [UART, PM25] Data not available.
19:51:18:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:609 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:609 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:629 -> [UART, PM25] Reading data...
19:51:18:630 -> [UART, PM25] Data not available.
19:51:18:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:630 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:630 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:650 -> [UART, PM25] Reading data...
19:51:18:651 -> [UART, PM25] Data not available.
19:51:18:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:651 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:651 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:671 -> [UART, PM25] Reading data...
19:51:18:672 -> [UART, PM25] Data not available.
19:51:18:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:672 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:672 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:692 -> [UART, PM25] Reading data...
19:51:18:693 -> [UART, PM25] Data not available.
19:51:18:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:693 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:693 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:713 -> [UART, PM25] Reading data...
19:51:18:714 -> [UART, PM25] Data not available.
19:51:18:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:714 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:714 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:734 -> [UART, PM25] Reading data...
19:51:18:734 -> [UART, PM25] Data not available.
19:51:18:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:735 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:735 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:755 -> [UART, PM25] Reading data...
19:51:18:756 -> [UART, PM25] Data not available.
19:51:18:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:756 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:756 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:776 -> [UART, PM25] Reading data...
19:51:18:777 -> [UART, PM25] Data not available.
19:51:18:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:777 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:777 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:797 -> [UART, PM25] Reading data...
19:51:18:798 -> [UART, PM25] Data not available.
19:51:18:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:798 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:798 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:819 -> [UART, PM25] Reading data...
19:51:18:819 -> [UART, PM25] Data not available.
19:51:18:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:819 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:819 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:839 -> [UART, PM25] Reading data...
19:51:18:840 -> [UART, PM25] Data not available.
19:51:18:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:840 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:840 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:860 -> [UART, PM25] Reading data...
19:51:18:861 -> [UART, PM25] Data not available.
19:51:18:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:861 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:861 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:881 -> [UART, PM25] Reading data...
19:51:18:882 -> [UART, PM25] Data not available.
19:51:18:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:882 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:882 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:902 -> [UART, PM25] Reading data...
19:51:18:903 -> [UART, PM25] Data not available.
19:51:18:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:903 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:903 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:923 -> [UART, PM25] Reading data...
19:51:18:924 -> [UART, PM25] Data not available.
19:51:18:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:924 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:924 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:944 -> [UART, PM25] Reading data...
19:51:18:945 -> [UART, PM25] Data not available.
19:51:18:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:945 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:945 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:965 -> [UART, PM25] Reading data...
19:51:18:966 -> [UART, PM25] Data not available.
19:51:18:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:966 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:966 -> [UART, PM25] Uart available, resetting event queue..
19:51:18:986 -> [UART, PM25] Reading data...
19:51:18:986 -> [UART, PM25] Data not available.
19:51:18:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:18:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:18:986 -> [UART, PM25] Uart available, clearing write errors..
19:51:18:986 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:007 -> [UART, PM25] Reading data...
19:51:19:008 -> [UART, PM25] Data not available.
19:51:19:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:008 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:008 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:028 -> [UART, PM25] Reading data...
19:51:19:029 -> [UART, PM25] Data not available.
19:51:19:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:029 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:029 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:049 -> [UART, PM25] Reading data...
19:51:19:050 -> [UART, PM25] Data not available.
19:51:19:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:050 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:050 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:070 -> [UART, PM25] Reading data...
19:51:19:071 -> [UART, PM25] Data not available.
19:51:19:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:071 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:071 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:103 -> [UART, PM25] Reading data...
19:51:19:104 -> [UART, PM25] Data not available.
19:51:19:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:104 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:104 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:112 -> [UART, PM25] Reading data...
19:51:19:113 -> [UART, PM25] Data not available.
19:51:19:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:113 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:113 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:133 -> [UART, PM25] Reading data...
19:51:19:134 -> [UART, PM25] Data not available.
19:51:19:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:134 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:134 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:134 -> PING!
19:51:19:348 -> [UART, PM25] Reading data...
19:51:19:349 -> [UART, PM25] Data not available.
19:51:19:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:349 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:349 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:368 -> [UART, PM25] Reading data...
19:51:19:368 -> [UART, PM25] Data not available.
19:51:19:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:369 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:369 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:389 -> [UART, PM25] Reading data...
19:51:19:390 -> [UART, PM25] Data not available.
19:51:19:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:390 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:390 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:410 -> [UART, PM25] Reading data...
19:51:19:411 -> [UART, PM25] Data not available.
19:51:19:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:411 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:411 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:431 -> [UART, PM25] Reading data...
19:51:19:432 -> [UART, PM25] Data not available.
19:51:19:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:432 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:432 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:452 -> [UART, PM25] Reading data...
19:51:19:453 -> [UART, PM25] Data not available.
19:51:19:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:453 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:453 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:473 -> [UART, PM25] Reading data...
19:51:19:474 -> [UART, PM25] Data not available.
19:51:19:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:474 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:474 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:494 -> [UART, PM25] Reading data...
19:51:19:495 -> [UART, PM25] Data not available.
19:51:19:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:495 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:495 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:515 -> [UART, PM25] Reading data...
19:51:19:516 -> [UART, PM25] Data not available.
19:51:19:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:537 -> [UART, PM25] Reading data...
19:51:19:537 -> [UART, PM25] Data not available.
19:51:19:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:537 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:537 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:557 -> [UART, PM25] Reading data...
19:51:19:558 -> [UART, PM25] Data not available.
19:51:19:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:558 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:558 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:578 -> [UART, PM25] Reading data...
19:51:19:579 -> [UART, PM25] Data not available.
19:51:19:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:579 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:579 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:599 -> [UART, PM25] Reading data...
19:51:19:600 -> [UART, PM25] Data not available.
19:51:19:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:600 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:600 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:630 -> [UART, PM25] Reading data...
19:51:19:631 -> [UART, PM25] Data not available.
19:51:19:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:631 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:631 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:641 -> [UART, PM25] Reading data...
19:51:19:642 -> [UART, PM25] Data not available.
19:51:19:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:642 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:642 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:662 -> [UART, PM25] Reading data...
19:51:19:663 -> [UART, PM25] Data not available.
19:51:19:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:663 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:663 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:683 -> [UART, PM25] Reading data...
19:51:19:684 -> [UART, PM25] Data not available.
19:51:19:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:684 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:684 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:704 -> [UART, PM25] Reading data...
19:51:19:705 -> [UART, PM25] Data not available.
19:51:19:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:705 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:705 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:725 -> [UART, PM25] Reading data...
19:51:19:726 -> [UART, PM25] Data not available.
19:51:19:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:726 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:726 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:746 -> [UART, PM25] Reading data...
19:51:19:747 -> [UART, PM25] Data not available.
19:51:19:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:747 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:747 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:767 -> [UART, PM25] Reading data...
19:51:19:768 -> [UART, PM25] Data not available.
19:51:19:768 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:768 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:768 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:768 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:788 -> [UART, PM25] Reading data...
19:51:19:789 -> [UART, PM25] Data not available.
19:51:19:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:789 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:789 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:809 -> [UART, PM25] Reading data...
19:51:19:809 -> [UART, PM25] Data not available.
19:51:19:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:809 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:809 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:830 -> [UART, PM25] Reading data...
19:51:19:831 -> [UART, PM25] Data not available.
19:51:19:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:831 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:831 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:851 -> [UART, PM25] Reading data...
19:51:19:852 -> [UART, PM25] Data not available.
19:51:19:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:852 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:852 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:872 -> [UART, PM25] Reading data...
19:51:19:873 -> [UART, PM25] Data not available.
19:51:19:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:873 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:873 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:893 -> [UART, PM25] Reading data...
19:51:19:894 -> [UART, PM25] Data not available.
19:51:19:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:894 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:894 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:914 -> [UART, PM25] Reading data...
19:51:19:918 -> [UART, PM25] Data not available.
19:51:19:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:935 -> [UART, PM25] Reading data...
19:51:19:936 -> [UART, PM25] Data not available.
19:51:19:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:936 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:936 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:956 -> [UART, PM25] Reading data...
19:51:19:957 -> [UART, PM25] Data not available.
19:51:19:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:957 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:957 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:977 -> [UART, PM25] Reading data...
19:51:19:978 -> [UART, PM25] Data not available.
19:51:19:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:978 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:978 -> [UART, PM25] Uart available, resetting event queue..
19:51:19:998 -> [UART, PM25] Reading data...
19:51:19:998 -> [UART, PM25] Data not available.
19:51:19:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:19:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:19:998 -> [UART, PM25] Uart available, clearing write errors..
19:51:19:998 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:019 -> [UART, PM25] Reading data...
19:51:20:020 -> [UART, PM25] Data not available.
19:51:20:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:020 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:020 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:040 -> [UART, PM25] Reading data...
19:51:20:041 -> [UART, PM25] Data not available.
19:51:20:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:041 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:041 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:061 -> [UART, PM25] Reading data...
19:51:20:062 -> [UART, PM25] Data not available.
19:51:20:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:062 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:062 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:110 -> [UART, PM25] Reading data...19:51:20:153 -> [UART, PM25] Reading data...
19:51:20:111 -> [UART, PM25] Data not available.
19:51:20:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:111 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:111 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:111 -> [UART, PM25] Reading data...
19:51:20:111 -> [UART, PM25] Data not available.
19:51:20:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:111 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:111 -> [UART, PM25] Uart available, resetting event queue..

19:51:20:125 -> [UART, PM25] Data not available.
19:51:20:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:125 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:125 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:124 -> [UART, PM25] Reading data...
19:51:20:153 -> [UART, PM25] Data not available.
19:51:20:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:153 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:153 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:166 -> [UART, PM25] Reading data...
19:51:20:166 -> [UART, PM25] Data not available.
19:51:20:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:167 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:167 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:187 -> [UART, PM25] Reading data...
19:51:20:188 -> [UART, PM25] Data not available.
19:51:20:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:188 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:188 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:208 -> [UART, PM25] Reading data...
19:51:20:209 -> [UART, PM25] Data not available.
19:51:20:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:209 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:209 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:229 -> [UART, PM25] Reading data...
19:51:20:230 -> [UART, PM25] Data not available.
19:51:20:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:230 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:230 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:250 -> [UART, PM25] Reading data...
19:51:20:250 -> [UART, PM25] Data not available.
19:51:20:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:250 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:250 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:271 -> [UART, PM25] Reading data...
19:51:20:272 -> [UART, PM25] Data not available.
19:51:20:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:272 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:272 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:292 -> [UART, PM25] Reading data...
19:51:20:293 -> [UART, PM25] Data not available.
19:51:20:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:293 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:293 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:313 -> [UART, PM25] Reading data...
19:51:20:315 -> [UART, PM25] Data not available.
19:51:20:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:315 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:315 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:334 -> [UART, PM25] Reading data...
19:51:20:335 -> [UART, PM25] Data not available.
19:51:20:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:335 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:335 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:355 -> [UART, PM25] Reading data...
19:51:20:356 -> [UART, PM25] Data not available.
19:51:20:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:356 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:356 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:376 -> [UART, PM25] Reading data...
19:51:20:377 -> [UART, PM25] Data not available.
19:51:20:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:377 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:377 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:397 -> [UART, PM25] Reading data...
19:51:20:398 -> [UART, PM25] Data not available.
19:51:20:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:398 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:398 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:418 -> [UART, PM25] Reading data...
19:51:20:419 -> [UART, PM25] Data not available.
19:51:20:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:419 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:419 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:442 -> [UART, PM25] Reading data...
19:51:20:442 -> [UART, PM25] Data not available.
19:51:20:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:442 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:442 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:460 -> [UART, PM25] Reading data...
19:51:20:460 -> [UART, PM25] Data not available.
19:51:20:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:461 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:461 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:481 -> [UART, PM25] Reading data...
19:51:20:482 -> [UART, PM25] Data not available.
19:51:20:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:482 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:482 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:502 -> [UART, PM25] Reading data...
19:51:20:502 -> [UART, PM25] Data not available.
19:51:20:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:503 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:503 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:523 -> [UART, PM25] Reading data...
19:51:20:524 -> [UART, PM25] Data not available.
19:51:20:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:524 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:524 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:544 -> [UART, PM25] Reading data...
19:51:20:545 -> [UART, PM25] Data not available.
19:51:20:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:545 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:545 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:565 -> [UART, PM25] Reading data...
19:51:20:566 -> [UART, PM25] Data not available.
19:51:20:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:566 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:566 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:586 -> [UART, PM25] Reading data...
19:51:20:587 -> [UART, PM25] Data not available.
19:51:20:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:587 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:587 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:607 -> [UART, PM25] Reading data...
19:51:20:608 -> [UART, PM25] Data not available.
19:51:20:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:608 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:608 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:628 -> [UART, PM25] Reading data...
19:51:20:629 -> [UART, PM25] Data not available.
19:51:20:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:629 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:629 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:649 -> [UART, PM25] Reading data...
19:51:20:650 -> [UART, PM25] Data not available.
19:51:20:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:650 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:650 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:670 -> [UART, PM25] Reading data...
19:51:20:670 -> [UART, PM25] Data not available.
19:51:20:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:671 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:671 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:691 -> [UART, PM25] Reading data...
19:51:20:692 -> [UART, PM25] Data not available.
19:51:20:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:692 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:692 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:712 -> [UART, PM25] Reading data...
19:51:20:712 -> [UART, PM25] Data not available.
19:51:20:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:713 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:713 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:735 -> [UART, PM25] Reading data...
19:51:20:736 -> [UART, PM25] Data not available.
19:51:20:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:736 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:736 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:754 -> [UART, PM25] Reading data...
19:51:20:755 -> [UART, PM25] Data not available.
19:51:20:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:755 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:755 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:775 -> [UART, PM25] Reading data...
19:51:20:776 -> [UART, PM25] Data not available.
19:51:20:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:776 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:776 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:796 -> [UART, PM25] Reading data...
19:51:20:797 -> [UART, PM25] Data not available.
19:51:20:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:797 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:797 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:817 -> [UART, PM25] Reading data...
19:51:20:818 -> [UART, PM25] Data not available.
19:51:20:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:818 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:818 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:838 -> [UART, PM25] Reading data...
19:51:20:839 -> [UART, PM25] Data not available.
19:51:20:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:839 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:839 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:859 -> [UART, PM25] Reading data...
19:51:20:860 -> [UART, PM25] Data not available.
19:51:20:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:860 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:860 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:881 -> [UART, PM25] Reading data...
19:51:20:883 -> [UART, PM25] Data not available.
19:51:20:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:883 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:883 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:901 -> [UART, PM25] Reading data...
19:51:20:902 -> [UART, PM25] Data not available.
19:51:20:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:902 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:902 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:922 -> [UART, PM25] Reading data...
19:51:20:923 -> [UART, PM25] Data not available.
19:51:20:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:923 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:923 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:943 -> [UART, PM25] Reading data...
19:51:20:944 -> [UART, PM25] Data not available.
19:51:20:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:944 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:944 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:964 -> [UART, PM25] Reading data...
19:51:20:964 -> [UART, PM25] Data not available.
19:51:20:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:965 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:965 -> [UART, PM25] Uart available, resetting event queue..
19:51:20:985 -> [UART, PM25] Reading data...
19:51:20:986 -> [UART, PM25] Data not available.
19:51:20:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:20:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:20:986 -> [UART, PM25] Uart available, clearing write errors..
19:51:20:986 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:006 -> [UART, PM25] Reading data...
19:51:21:007 -> [UART, PM25] Data not available.
19:51:21:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:007 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:007 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:027 -> [UART, PM25] Reading data...
19:51:21:028 -> [UART, PM25] Data not available.
19:51:21:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:028 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:028 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:048 -> [UART, PM25] Reading data...
19:51:21:049 -> [UART, PM25] Data not available.
19:51:21:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:049 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:049 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:069 -> [UART, PM25] Reading data...
19:51:21:070 -> [UART, PM25] Data not available.
19:51:21:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:070 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:070 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:090 -> [UART, PM25] Reading data...
19:51:21:091 -> [UART, PM25] Data not available.
19:51:21:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:091 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:091 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:111 -> [UART, PM25] Reading data...
19:51:21:112 -> [UART, PM25] Data not available.
19:51:21:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:112 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:112 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:132 -> [UART, PM25] Reading data...
19:51:21:133 -> [UART, PM25] Data not available.
19:51:21:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:133 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:133 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:153 -> [UART, PM25] Reading data...
19:51:21:154 -> [UART, PM25] Data not available.
19:51:21:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:154 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:154 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:186 -> [UART, PM25] Reading data...
19:51:21:187 -> [UART, PM25] Data not available.
19:51:21:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:187 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:187 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:195 -> [UART, PM25] Reading data...
19:51:21:196 -> [UART, PM25] Data not available.
19:51:21:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:196 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:196 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:216 -> [UART, PM25] Reading data...
19:51:21:217 -> [UART, PM25] Data not available.
19:51:21:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:217 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:217 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:237 -> [UART, PM25] Reading data...
19:51:21:238 -> [UART, PM25] Data not available.
19:51:21:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:238 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:238 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:258 -> [UART, PM25] Reading data...
19:51:21:259 -> [UART, PM25] Data not available.
19:51:21:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:259 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:259 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:279 -> [UART, PM25] Reading data...
19:51:21:280 -> [UART, PM25] Data not available.
19:51:21:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:280 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:280 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:300 -> [UART, PM25] Reading data...
19:51:21:301 -> [UART, PM25] Data not available.
19:51:21:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:301 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:301 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:321 -> [UART, PM25] Reading data...
19:51:21:321 -> [UART, PM25] Data not available.
19:51:21:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:321 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:321 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:342 -> [UART, PM25] Reading data...
19:51:21:343 -> [UART, PM25] Data not available.
19:51:21:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:343 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:343 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:363 -> [UART, PM25] Reading data...
19:51:21:364 -> [UART, PM25] Data not available.
19:51:21:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:364 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:364 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:384 -> [UART, PM25] Reading data...
19:51:21:385 -> [UART, PM25] Data not available.
19:51:21:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:385 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:385 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:405 -> [UART, PM25] Reading data...
19:51:21:406 -> [UART, PM25] Data not available.
19:51:21:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:406 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:406 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:426 -> [UART, PM25] Reading data...
19:51:21:427 -> [UART, PM25] Data not available.
19:51:21:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:427 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:427 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:447 -> [UART, PM25] Reading data...
19:51:21:448 -> [UART, PM25] Data not available.
19:51:21:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:448 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:448 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:468 -> [UART, PM25] Reading data...
19:51:21:469 -> [UART, PM25] Data not available.
19:51:21:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:469 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:469 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:489 -> [UART, PM25] Reading data...
19:51:21:490 -> [UART, PM25] Data not available.
19:51:21:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:490 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:490 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:510 -> [UART, PM25] Reading data...
19:51:21:511 -> [UART, PM25] Data not available.
19:51:21:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:511 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:511 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:531 -> [UART, PM25] Reading data...
19:51:21:532 -> [UART, PM25] Data not available.
19:51:21:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:532 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:532 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:552 -> [UART, PM25] Reading data...
19:51:21:553 -> [UART, PM25] Data not available.
19:51:21:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:553 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:553 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:573 -> [UART, PM25] Reading data...
19:51:21:574 -> [UART, PM25] Data not available.
19:51:21:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:574 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:574 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:594 -> [UART, PM25] Reading data...
19:51:21:595 -> [UART, PM25] Data not available.
19:51:21:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:595 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:595 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:615 -> [UART, PM25] Reading data...
19:51:21:616 -> [UART, PM25] Data not available.
19:51:21:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:616 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:616 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:636 -> [UART, PM25] Reading data...
19:51:21:637 -> [UART, PM25] Data not available.
19:51:21:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:637 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:637 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:657 -> [UART, PM25] Reading data...
19:51:21:658 -> [UART, PM25] Data not available.
19:51:21:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:678 -> [UART, PM25] Reading data...
19:51:21:679 -> [UART, PM25] Data not available.
19:51:21:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:679 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:679 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:699 -> [UART, PM25] Reading data...
19:51:21:700 -> [UART, PM25] Data not available.
19:51:21:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:700 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:700 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:720 -> [UART, PM25] Reading data...
19:51:21:721 -> [UART, PM25] Data not available.
19:51:21:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:721 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:721 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:741 -> [UART, PM25] Reading data...
19:51:21:742 -> [UART, PM25] Data not available.
19:51:21:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:742 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:742 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:762 -> [UART, PM25] Reading data...
19:51:21:762 -> [UART, PM25] Data not available.
19:51:21:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:762 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:762 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:783 -> [UART, PM25] Reading data...
19:51:21:786 -> [UART, PM25] Data not available.
19:51:21:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:786 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:786 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:824 -> [UART, PM25] Reading data...
19:51:21:824 -> [UART, PM25] Data not available.
19:51:21:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:824 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:824 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:834 -> [UART, PM25] Reading data...
19:51:21:834 -> [UART, PM25] Data not available.
19:51:21:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:834 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:834 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:846 -> [UART, PM25] Reading data...
19:51:21:847 -> [UART, PM25] Data not available.
19:51:21:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:847 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:847 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:867 -> [UART, PM25] Reading data...
19:51:21:868 -> [UART, PM25] Data not available.
19:51:21:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:868 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:868 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:889 -> [UART, PM25] Reading data...
19:51:21:889 -> [UART, PM25] Data not available.
19:51:21:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:889 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:889 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:909 -> [UART, PM25] Reading data...
19:51:21:910 -> [UART, PM25] Data not available.
19:51:21:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:910 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:910 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:930 -> [UART, PM25] Reading data...
19:51:21:931 -> [UART, PM25] Data not available.
19:51:21:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:951 -> [UART, PM25] Reading data...
19:51:21:952 -> [UART, PM25] Data not available.
19:51:21:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:952 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:952 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:972 -> [UART, PM25] Reading data...
19:51:21:973 -> [UART, PM25] Data not available.
19:51:21:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:973 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:973 -> [UART, PM25] Uart available, resetting event queue..
19:51:21:993 -> [UART, PM25] Reading data...
19:51:21:994 -> [UART, PM25] Data not available.
19:51:21:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:21:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:21:994 -> [UART, PM25] Uart available, clearing write errors..
19:51:21:994 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:014 -> [UART, PM25] Reading data...
19:51:22:015 -> [UART, PM25] Data not available.
19:51:22:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:035 -> [UART, PM25] Reading data...
19:51:22:036 -> [UART, PM25] Data not available.
19:51:22:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:056 -> [UART, PM25] Reading data...
19:51:22:057 -> [UART, PM25] Data not available.
19:51:22:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:057 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:057 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:077 -> [UART, PM25] Reading data...
19:51:22:078 -> [UART, PM25] Data not available.
19:51:22:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:098 -> [UART, PM25] Reading data...
19:51:22:099 -> [UART, PM25] Data not available.
19:51:22:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:099 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:099 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:119 -> [UART, PM25] Reading data...
19:51:22:120 -> [UART, PM25] Data not available.
19:51:22:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:120 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:120 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:140 -> [UART, PM25] Reading data...
19:51:22:141 -> [UART, PM25] Data not available.
19:51:22:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:161 -> [UART, PM25] Reading data...
19:51:22:162 -> [UART, PM25] Data not available.
19:51:22:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:182 -> [UART, PM25] Reading data...
19:51:22:183 -> [UART, PM25] Data not available.
19:51:22:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:214 -> [UART, PM25] Reading data...
19:51:22:215 -> [UART, PM25] Data not available.
19:51:22:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:215 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:215 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:224 -> [UART, PM25] Reading data...
19:51:22:225 -> [UART, PM25] Data not available.
19:51:22:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:225 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:225 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:245 -> [UART, PM25] Reading data...
19:51:22:245 -> [UART, PM25] Data not available.
19:51:22:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:245 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:245 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:266 -> [UART, PM25] Reading data...
19:51:22:267 -> [UART, PM25] Data not available.
19:51:22:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:267 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:267 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:287 -> [UART, PM25] Reading data...
19:51:22:288 -> [UART, PM25] Data not available.
19:51:22:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:288 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:288 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:308 -> [UART, PM25] Reading data...
19:51:22:309 -> [UART, PM25] Data not available.
19:51:22:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:309 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:309 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:329 -> [UART, PM25] Reading data...
19:51:22:330 -> [UART, PM25] Data not available.
19:51:22:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:330 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:330 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:350 -> [UART, PM25] Reading data...
19:51:22:351 -> [UART, PM25] Data not available.
19:51:22:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:351 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:351 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:375 -> [UART, PM25] Reading data...
19:51:22:375 -> [UART, PM25] Data not available.
19:51:22:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:375 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:375 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:392 -> [UART, PM25] Reading data...
19:51:22:393 -> [UART, PM25] Data not available.
19:51:22:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:393 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:393 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:413 -> [UART, PM25] Reading data...
19:51:22:414 -> [UART, PM25] Data not available.
19:51:22:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:414 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:414 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:434 -> [UART, PM25] Reading data...
19:51:22:435 -> [UART, PM25] Data not available.
19:51:22:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:435 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:435 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:455 -> [UART, PM25] Reading data...
19:51:22:456 -> [UART, PM25] Data not available.
19:51:22:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:456 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:456 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:476 -> [UART, PM25] Reading data...
19:51:22:477 -> [UART, PM25] Data not available.
19:51:22:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:477 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:477 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:497 -> [UART, PM25] Reading data...
19:51:22:498 -> [UART, PM25] Data not available.
19:51:22:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:498 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:498 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:518 -> [UART, PM25] Reading data...
19:51:22:518 -> [UART, PM25] Data not available.
19:51:22:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:519 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:519 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:541 -> [UART, PM25] Reading data...
19:51:22:542 -> [UART, PM25] Data not available.
19:51:22:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:542 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:542 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:560 -> [UART, PM25] Reading data...
19:51:22:561 -> [UART, PM25] Data not available.
19:51:22:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:561 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:561 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:581 -> [UART, PM25] Reading data...
19:51:22:581 -> [UART, PM25] Data not available.
19:51:22:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:581 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:581 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:602 -> [UART, PM25] Reading data...
19:51:22:603 -> [UART, PM25] Data not available.
19:51:22:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:603 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:603 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:623 -> [UART, PM25] Reading data...
19:51:22:627 -> [UART, PM25] Data not available.
19:51:22:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:627 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:627 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:644 -> [UART, PM25] Reading data...
19:51:22:645 -> [UART, PM25] Data not available.
19:51:22:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:645 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:645 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:665 -> [UART, PM25] Reading data...
19:51:22:666 -> [UART, PM25] Data not available.
19:51:22:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:666 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:666 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:686 -> [UART, PM25] Reading data...
19:51:22:687 -> [UART, PM25] Data not available.
19:51:22:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:687 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:687 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:707 -> [UART, PM25] Reading data...
19:51:22:708 -> [UART, PM25] Data not available.
19:51:22:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:708 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:708 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:729 -> [UART, PM25] Reading data...
19:51:22:729 -> [UART, PM25] Data not available.
19:51:22:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:729 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:729 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:749 -> [UART, PM25] Reading data...
19:51:22:749 -> [UART, PM25] Data not available.
19:51:22:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:749 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:749 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:770 -> [UART, PM25] Reading data...
19:51:22:771 -> [UART, PM25] Data not available.
19:51:22:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:771 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:771 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:791 -> [UART, PM25] Reading data...
19:51:22:792 -> [UART, PM25] Data not available.
19:51:22:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:792 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:792 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:812 -> [UART, PM25] Reading data...
19:51:22:813 -> [UART, PM25] Data not available.
19:51:22:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:813 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:813 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:833 -> [UART, PM25] Reading data...
19:51:22:834 -> [UART, PM25] Data not available.
19:51:22:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:834 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:834 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:854 -> [UART, PM25] Reading data...
19:51:22:855 -> [UART, PM25] Data not available.
19:51:22:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:855 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:855 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:875 -> [UART, PM25] Reading data...
19:51:22:876 -> [UART, PM25] Data not available.
19:51:22:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:876 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:876 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:896 -> [UART, PM25] Reading data...
19:51:22:897 -> [UART, PM25] Data not available.
19:51:22:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:918 -> [UART, PM25] Reading data...
19:51:22:918 -> [UART, PM25] Data not available.
19:51:22:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:938 -> [UART, PM25] Reading data...
19:51:22:939 -> [UART, PM25] Data not available.
19:51:22:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:939 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:939 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:959 -> [UART, PM25] Reading data...
19:51:22:960 -> [UART, PM25] Data not available.
19:51:22:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:960 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:960 -> [UART, PM25] Uart available, resetting event queue..
19:51:22:980 -> [UART, PM25] Reading data...
19:51:22:981 -> [UART, PM25] Data not available.
19:51:22:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:22:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:22:981 -> [UART, PM25] Uart available, clearing write errors..
19:51:22:981 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:002 -> [UART, PM25] Reading data...
19:51:23:004 -> [UART, PM25] Data not available.
19:51:23:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:004 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:004 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:022 -> [UART, PM25] Reading data...
19:51:23:023 -> [UART, PM25] Data not available.
19:51:23:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:023 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:023 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:043 -> [UART, PM25] Reading data...
19:51:23:044 -> [UART, PM25] Data not available.
19:51:23:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:044 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:044 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:064 -> [UART, PM25] Reading data...
19:51:23:065 -> [UART, PM25] Data not available.
19:51:23:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:065 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:065 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:085 -> [UART, PM25] Reading data...
19:51:23:086 -> [UART, PM25] Data not available.
19:51:23:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:086 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:086 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:106 -> [UART, PM25] Reading data...
19:51:23:107 -> [UART, PM25] Data not available.
19:51:23:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:107 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:107 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:127 -> [UART, PM25] Reading data...
19:51:23:127 -> [UART, PM25] Data not available.
19:51:23:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:148 -> [UART, PM25] Reading data...
19:51:23:149 -> [UART, PM25] Data not available.
19:51:23:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:149 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:149 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:169 -> [UART, PM25] Reading data...
19:51:23:170 -> [UART, PM25] Data not available.
19:51:23:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:190 -> [UART, PM25] Reading data...
19:51:23:190 -> [UART, PM25] Data not available.
19:51:23:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:190 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:190 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:211 -> [UART, PM25] Reading data...
19:51:23:212 -> [UART, PM25] Data not available.
19:51:23:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:212 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:212 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:242 -> [UART, PM25] Reading data...
19:51:23:243 -> [UART, PM25] Data not available.
19:51:23:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:243 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:243 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:253 -> [UART, PM25] Reading data...
19:51:23:253 -> [UART, PM25] Data not available.
19:51:23:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:253 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:253 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:274 -> [UART, PM25] Reading data...
19:51:23:275 -> [UART, PM25] Data not available.
19:51:23:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:295 -> [UART, PM25] Reading data...
19:51:23:296 -> [UART, PM25] Data not available.
19:51:23:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:316 -> [UART, PM25] Reading data...
19:51:23:317 -> [UART, PM25] Data not available.
19:51:23:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:337 -> [UART, PM25] Reading data...
19:51:23:338 -> [UART, PM25] Data not available.
19:51:23:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:358 -> [UART, PM25] Reading data...
19:51:23:359 -> [UART, PM25] Data not available.
19:51:23:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:379 -> [UART, PM25] Reading data...
19:51:23:379 -> [UART, PM25] Data not available.
19:51:23:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:379 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:379 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:400 -> [UART, PM25] Reading data...
19:51:23:401 -> [UART, PM25] Data not available.
19:51:23:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:421 -> [UART, PM25] Reading data...
19:51:23:422 -> [UART, PM25] Data not available.
19:51:23:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:422 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:422 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:442 -> [UART, PM25] Reading data...
19:51:23:442 -> [UART, PM25] Data not available.
19:51:23:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:442 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:442 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:463 -> [UART, PM25] Reading data...
19:51:23:464 -> [UART, PM25] Data not available.
19:51:23:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:484 -> [UART, PM25] Reading data...
19:51:23:485 -> [UART, PM25] Data not available.
19:51:23:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:485 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:485 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:505 -> [UART, PM25] Reading data...
19:51:23:506 -> [UART, PM25] Data not available.
19:51:23:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:506 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:506 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:526 -> [UART, PM25] Reading data...
19:51:23:527 -> [UART, PM25] Data not available.
19:51:23:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:527 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:527 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:547 -> [UART, PM25] Reading data...
19:51:23:548 -> [UART, PM25] Data not available.
19:51:23:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:548 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:548 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:568 -> [UART, PM25] Reading data...
19:51:23:569 -> [UART, PM25] Data not available.
19:51:23:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:589 -> [UART, PM25] Reading data...
19:51:23:590 -> [UART, PM25] Data not available.
19:51:23:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:610 -> [UART, PM25] Reading data...
19:51:23:610 -> [UART, PM25] Data not available.
19:51:23:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:610 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:610 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:631 -> [UART, PM25] Reading data...
19:51:23:631 -> [UART, PM25] Data not available.
19:51:23:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:631 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:631 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:652 -> [UART, PM25] Reading data...
19:51:23:652 -> [UART, PM25] Data not available.
19:51:23:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:652 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:652 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:673 -> [UART, PM25] Reading data...
19:51:23:674 -> [UART, PM25] Data not available.
19:51:23:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:674 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:674 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:694 -> [UART, PM25] Reading data...
19:51:23:694 -> [UART, PM25] Data not available.
19:51:23:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:694 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:694 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:715 -> [UART, PM25] Reading data...
19:51:23:716 -> [UART, PM25] Data not available.
19:51:23:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:769 -> [UART, PM25] Reading data...
19:51:23:770 -> [UART, PM25] Data not available.
19:51:23:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:770 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:770 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:770 -> [UART, PM25] Reading data...
19:51:23:770 -> [UART, PM25] Data not available.
19:51:23:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:770 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:770 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:778 -> [UART, PM25] Reading data...
19:51:23:778 -> [UART, PM25] Data not available.
19:51:23:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:778 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:778 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:799 -> [UART, PM25] Reading data...
19:51:23:799 -> [UART, PM25] Data not available.
19:51:23:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:799 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:799 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:820 -> [UART, PM25] Reading data...
19:51:23:820 -> [UART, PM25] Data not available.
19:51:23:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:820 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:820 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:841 -> [UART, PM25] Reading data...
19:51:23:841 -> [UART, PM25] Data not available.
19:51:23:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:23:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:23:841 -> [UART, PM25] Uart available, clearing write errors..
19:51:23:841 -> [UART, PM25] Uart available, resetting event queue..
19:51:23:841 -> PING!
19:51:24:065 -> [UART, PM25] Reading data...
19:51:24:065 -> [UART, PM25] Data not available.
19:51:24:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:066 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:066 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:086 -> [UART, PM25] Reading data...
19:51:24:087 -> [UART, PM25] Data not available.
19:51:24:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:087 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:087 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:107 -> [UART, PM25] Reading data...
19:51:24:107 -> [UART, PM25] Data not available.
19:51:24:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:107 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:107 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:128 -> [UART, PM25] Reading data...
19:51:24:128 -> [UART, PM25] Data not available.
19:51:24:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:149 -> [UART, PM25] Reading data...
19:51:24:149 -> [UART, PM25] Data not available.
19:51:24:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:149 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:149 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:170 -> [UART, PM25] Reading data...
19:51:24:170 -> [UART, PM25] Data not available.
19:51:24:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:191 -> [UART, PM25] Reading data...
19:51:24:191 -> [UART, PM25] Data not available.
19:51:24:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:191 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:191 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:212 -> [UART, PM25] Reading data...
19:51:24:212 -> [UART, PM25] Data not available.
19:51:24:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:212 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:212 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:233 -> [UART, PM25] Reading data...
19:51:24:254 -> [UART, PM25] Data not available.
19:51:24:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:254 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:254 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:285 -> [UART, PM25] Reading data...
19:51:24:286 -> [UART, PM25] Data not available.
19:51:24:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:286 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:286 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:296 -> [UART, PM25] Reading data...
19:51:24:296 -> [UART, PM25] Data not available.
19:51:24:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:254 -> [UART, PM25] Reading data...
19:51:24:233 -> [UART, PM25] Data not available.
19:51:24:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:233 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:233 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:317 -> [UART, PM25] Reading data...
19:51:24:318 -> [UART, PM25] Data not available.
19:51:24:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:318 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:318 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:338 -> [UART, PM25] Reading data...
19:51:24:338 -> [UART, PM25] Data not available.
19:51:24:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:359 -> [UART, PM25] Reading data...
19:51:24:359 -> [UART, PM25] Data not available.
19:51:24:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:380 -> [UART, PM25] Reading data...
19:51:24:380 -> [UART, PM25] Data not available.
19:51:24:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:380 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:380 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:401 -> [UART, PM25] Reading data...
19:51:24:401 -> [UART, PM25] Data not available.
19:51:24:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:422 -> [UART, PM25] Reading data...
19:51:24:422 -> [UART, PM25] Data not available.
19:51:24:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:422 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:422 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:443 -> [UART, PM25] Reading data...
19:51:24:443 -> [UART, PM25] Data not available.
19:51:24:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:464 -> [UART, PM25] Reading data...
19:51:24:464 -> [UART, PM25] Data not available.
19:51:24:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:485 -> [UART, PM25] Reading data...
19:51:24:485 -> [UART, PM25] Data not available.
19:51:24:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:485 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:485 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:506 -> [UART, PM25] Reading data...
19:51:24:506 -> [UART, PM25] Data not available.
19:51:24:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:506 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:506 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:527 -> [UART, PM25] Reading data...
19:51:24:527 -> [UART, PM25] Data not available.
19:51:24:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:527 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:527 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:548 -> [UART, PM25] Reading data...
19:51:24:548 -> [UART, PM25] Data not available.
19:51:24:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:548 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:548 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:569 -> [UART, PM25] Reading data...
19:51:24:569 -> [UART, PM25] Data not available.
19:51:24:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:590 -> [UART, PM25] Reading data...
19:51:24:590 -> [UART, PM25] Data not available.
19:51:24:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:611 -> [UART, PM25] Reading data...
19:51:24:611 -> [UART, PM25] Data not available.
19:51:24:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:611 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:611 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:632 -> [UART, PM25] Reading data...
19:51:24:632 -> [UART, PM25] Data not available.
19:51:24:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:632 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:632 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:653 -> [UART, PM25] Reading data...
19:51:24:653 -> [UART, PM25] Data not available.
19:51:24:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:653 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:653 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:674 -> [UART, PM25] Reading data...
19:51:24:674 -> [UART, PM25] Data not available.
19:51:24:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:674 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:674 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:695 -> [UART, PM25] Reading data...
19:51:24:695 -> [UART, PM25] Data not available.
19:51:24:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:695 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:695 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:716 -> [UART, PM25] Reading data...
19:51:24:716 -> [UART, PM25] Data not available.
19:51:24:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:737 -> [UART, PM25] Reading data...
19:51:24:737 -> [UART, PM25] Data not available.
19:51:24:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:737 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:737 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:758 -> [UART, PM25] Reading data...
19:51:24:758 -> [UART, PM25] Data not available.
19:51:24:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:758 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:758 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:779 -> [UART, PM25] Reading data...
19:51:24:779 -> [UART, PM25] Data not available.
19:51:24:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:779 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:779 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:800 -> [UART, PM25] Reading data...
19:51:24:800 -> [UART, PM25] Data not available.
19:51:24:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:800 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:800 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:821 -> [UART, PM25] Reading data...
19:51:24:821 -> [UART, PM25] Data not available.
19:51:24:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:821 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:821 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:842 -> [UART, PM25] Reading data...
19:51:24:842 -> [UART, PM25] Data not available.
19:51:24:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:842 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:842 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:863 -> [UART, PM25] Reading data...
19:51:24:863 -> [UART, PM25] Data not available.
19:51:24:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:863 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:863 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:884 -> [UART, PM25] Reading data...
19:51:24:884 -> [UART, PM25] Data not available.
19:51:24:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:884 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:884 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:905 -> [UART, PM25] Reading data...
19:51:24:905 -> [UART, PM25] Data not available.
19:51:24:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:905 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:905 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:926 -> [UART, PM25] Reading data...
19:51:24:926 -> [UART, PM25] Data not available.
19:51:24:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:926 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:926 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:947 -> [UART, PM25] Reading data...
19:51:24:947 -> [UART, PM25] Data not available.
19:51:24:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:947 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:947 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:968 -> [UART, PM25] Reading data...
19:51:24:968 -> [UART, PM25] Data not available.
19:51:24:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:968 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:968 -> [UART, PM25] Uart available, resetting event queue..
19:51:24:989 -> [UART, PM25] Reading data...
19:51:24:990 -> [UART, PM25] Data not available.
19:51:24:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:24:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:24:990 -> [UART, PM25] Uart available, clearing write errors..
19:51:24:990 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:010 -> [UART, PM25] Reading data...
19:51:25:010 -> [UART, PM25] Data not available.
19:51:25:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:010 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:010 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:031 -> [UART, PM25] Reading data...
19:51:25:033 -> [UART, PM25] Data not available.
19:51:25:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:033 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:033 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:052 -> [UART, PM25] Reading data...
19:51:25:053 -> [UART, PM25] Data not available.
19:51:25:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:053 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:053 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:073 -> [UART, PM25] Reading data...
19:51:25:073 -> [UART, PM25] Data not available.
19:51:25:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:094 -> [UART, PM25] Reading data...
19:51:25:094 -> [UART, PM25] Data not available.
19:51:25:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:094 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:094 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:115 -> [UART, PM25] Reading data...
19:51:25:115 -> [UART, PM25] Data not available.
19:51:25:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:115 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:115 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:136 -> [UART, PM25] Reading data...
19:51:25:136 -> [UART, PM25] Data not available.
19:51:25:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:136 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:136 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:157 -> [UART, PM25] Reading data...
19:51:25:157 -> [UART, PM25] Data not available.
19:51:25:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:157 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:157 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:178 -> [UART, PM25] Reading data...
19:51:25:179 -> [UART, PM25] Data not available.
19:51:25:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:179 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:179 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:199 -> [UART, PM25] Reading data...
19:51:25:199 -> [UART, PM25] Data not available.
19:51:25:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:199 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:199 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:220 -> [UART, PM25] Reading data...
19:51:25:220 -> [UART, PM25] Data not available.
19:51:25:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:241 -> [UART, PM25] Reading data...
19:51:25:241 -> [UART, PM25] Data not available.
19:51:25:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:241 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:241 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:262 -> [UART, PM25] Reading data...
19:51:25:262 -> [UART, PM25] Data not available.
19:51:25:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:283 -> [UART, PM25] Reading data...
19:51:25:283 -> [UART, PM25] Data not available.
19:51:25:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:283 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:283 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:313 -> [UART, PM25] Reading data...
19:51:25:314 -> [UART, PM25] Data not available.
19:51:25:314 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:314 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:314 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:314 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:325 -> [UART, PM25] Reading data...
19:51:25:325 -> [UART, PM25] Data not available.
19:51:25:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:325 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:325 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:346 -> [UART, PM25] Reading data...
19:51:25:346 -> [UART, PM25] Data not available.
19:51:25:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:346 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:346 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:367 -> [UART, PM25] Reading data...
19:51:25:368 -> [UART, PM25] Data not available.
19:51:25:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:368 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:368 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:388 -> [UART, PM25] Reading data...
19:51:25:388 -> [UART, PM25] Data not available.
19:51:25:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:388 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:388 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:409 -> [UART, PM25] Reading data...
19:51:25:409 -> [UART, PM25] Data not available.
19:51:25:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:430 -> [UART, PM25] Reading data...
19:51:25:430 -> [UART, PM25] Data not available.
19:51:25:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:430 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:430 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:451 -> [UART, PM25] Reading data...
19:51:25:451 -> [UART, PM25] Data not available.
19:51:25:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:472 -> [UART, PM25] Reading data...
19:51:25:472 -> [UART, PM25] Data not available.
19:51:25:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:493 -> [UART, PM25] Reading data...
19:51:25:493 -> [UART, PM25] Data not available.
19:51:25:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:538 -> [UART, PM25] Reading data...
19:51:25:538 -> [UART, PM25] Data not available.
19:51:25:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:538 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:538 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:538 -> [UART, PM25] Reading data...
19:51:25:538 -> [UART, PM25] Data not available.
19:51:25:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:538 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:538 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:559 -> [UART, PM25] Reading data...
19:51:25:560 -> [UART, PM25] Data not available.
19:51:25:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:560 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:560 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:577 -> [UART, PM25] Reading data...
19:51:25:577 -> [UART, PM25] Data not available.
19:51:25:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:598 -> [UART, PM25] Reading data...
19:51:25:598 -> [UART, PM25] Data not available.
19:51:25:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:619 -> [UART, PM25] Reading data...
19:51:25:619 -> [UART, PM25] Data not available.
19:51:25:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:619 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:619 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:640 -> [UART, PM25] Reading data...
19:51:25:640 -> [UART, PM25] Data not available.
19:51:25:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:661 -> [UART, PM25] Reading data...
19:51:25:662 -> [UART, PM25] Data not available.
19:51:25:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:662 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:662 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:682 -> [UART, PM25] Reading data...
19:51:25:682 -> [UART, PM25] Data not available.
19:51:25:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:703 -> [UART, PM25] Reading data...
19:51:25:703 -> [UART, PM25] Data not available.
19:51:25:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:703 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:703 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:724 -> [UART, PM25] Reading data...
19:51:25:724 -> [UART, PM25] Data not available.
19:51:25:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:745 -> [UART, PM25] Reading data...
19:51:25:745 -> [UART, PM25] Data not available.
19:51:25:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:766 -> [UART, PM25] Reading data...
19:51:25:766 -> [UART, PM25] Data not available.
19:51:25:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:787 -> [UART, PM25] Reading data...
19:51:25:787 -> [UART, PM25] Data not available.
19:51:25:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:787 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:787 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:808 -> [UART, PM25] Reading data...
19:51:25:808 -> [UART, PM25] Data not available.
19:51:25:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:829 -> [UART, PM25] Reading data...
19:51:25:829 -> [UART, PM25] Data not available.
19:51:25:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:850 -> [UART, PM25] Reading data...
19:51:25:850 -> [UART, PM25] Data not available.
19:51:25:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:850 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:850 -> [UART, PM25] Uart available, resetting event queue..

19:51:25:872 -> [UART, PM25] Data not available.
19:51:25:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:872 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:872 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:913 -> [UART, PM25] Reading data...19:51:25:871 -> [UART, PM25] Reading data...19:51:25:892 -> [UART, PM25] Reading data...
19:51:25:892 -> [UART, PM25] Data not available.
19:51:25:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:892 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:892 -> [UART, PM25] Uart available, resetting event queue..

19:51:25:913 -> [UART, PM25] Data not available.
19:51:25:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:913 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:913 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:934 -> [UART, PM25] Reading data...
19:51:25:935 -> [UART, PM25] Data not available.
19:51:25:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:935 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:935 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:955 -> [UART, PM25] Reading data...
19:51:25:955 -> [UART, PM25] Data not available.
19:51:25:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:955 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:955 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:976 -> [UART, PM25] Reading data...
19:51:25:976 -> [UART, PM25] Data not available.
19:51:25:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:976 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:976 -> [UART, PM25] Uart available, resetting event queue..
19:51:25:997 -> [UART, PM25] Reading data...
19:51:25:997 -> [UART, PM25] Data not available.
19:51:25:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:25:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:25:997 -> [UART, PM25] Uart available, clearing write errors..
19:51:25:997 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:018 -> [UART, PM25] Reading data...
19:51:26:021 -> [UART, PM25] Data not available.
19:51:26:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:021 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:021 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:039 -> [UART, PM25] Reading data...
19:51:26:039 -> [UART, PM25] Data not available.
19:51:26:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:039 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:039 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:060 -> [UART, PM25] Reading data...
19:51:26:060 -> [UART, PM25] Data not available.
19:51:26:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:060 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:060 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:083 -> [UART, PM25] Reading data...
19:51:26:083 -> [UART, PM25] Data not available.
19:51:26:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:083 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:083 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:102 -> [UART, PM25] Reading data...
19:51:26:102 -> [UART, PM25] Data not available.
19:51:26:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:102 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:102 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:123 -> [UART, PM25] Reading data...
19:51:26:123 -> [UART, PM25] Data not available.
19:51:26:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:123 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:123 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:144 -> [UART, PM25] Reading data...
19:51:26:145 -> [UART, PM25] Data not available.
19:51:26:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:145 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:145 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:165 -> [UART, PM25] Reading data...
19:51:26:165 -> [UART, PM25] Data not available.
19:51:26:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:165 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:165 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:186 -> [UART, PM25] Reading data...
19:51:26:186 -> [UART, PM25] Data not available.
19:51:26:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:186 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:186 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:207 -> [UART, PM25] Reading data...
19:51:26:207 -> [UART, PM25] Data not available.
19:51:26:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:207 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:207 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:228 -> [UART, PM25] Reading data...
19:51:26:228 -> [UART, PM25] Data not available.
19:51:26:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:228 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:228 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:249 -> [UART, PM25] Reading data...
19:51:26:249 -> [UART, PM25] Data not available.
19:51:26:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:249 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:249 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:270 -> [UART, PM25] Reading data...
19:51:26:270 -> [UART, PM25] Data not available.
19:51:26:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:270 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:270 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:291 -> [UART, PM25] Reading data...
19:51:26:291 -> [UART, PM25] Data not available.
19:51:26:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:291 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:291 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:312 -> [UART, PM25] Reading data...
19:51:26:313 -> [UART, PM25] Data not available.
19:51:26:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:313 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:313 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:347 -> [UART, PM25] Reading data...
19:51:26:348 -> [UART, PM25] Data not available.
19:51:26:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:348 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:348 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:354 -> [UART, PM25] Reading data...
19:51:26:354 -> [UART, PM25] Data not available.
19:51:26:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:354 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:354 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:375 -> [UART, PM25] Reading data...
19:51:26:376 -> [UART, PM25] Data not available.
19:51:26:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:376 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:376 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:396 -> [UART, PM25] Reading data...
19:51:26:396 -> [UART, PM25] Data not available.
19:51:26:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:396 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:396 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:417 -> [UART, PM25] Reading data...
19:51:26:417 -> [UART, PM25] Data not available.
19:51:26:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:417 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:417 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:438 -> [UART, PM25] Reading data...
19:51:26:438 -> [UART, PM25] Data not available.
19:51:26:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:438 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:438 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:459 -> [UART, PM25] Reading data...
19:51:26:459 -> [UART, PM25] Data not available.
19:51:26:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:459 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:459 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:480 -> [UART, PM25] Reading data...
19:51:26:480 -> [UART, PM25] Data not available.
19:51:26:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:480 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:480 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:501 -> [UART, PM25] Reading data...
19:51:26:501 -> [UART, PM25] Data not available.
19:51:26:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:501 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:501 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:522 -> [UART, PM25] Reading data...
19:51:26:522 -> [UART, PM25] Data not available.
19:51:26:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:522 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:522 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:543 -> [UART, PM25] Reading data...
19:51:26:543 -> [UART, PM25] Data not available.
19:51:26:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:543 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:543 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:564 -> [UART, PM25] Reading data...
19:51:26:564 -> [UART, PM25] Data not available.
19:51:26:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:564 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:564 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:585 -> [UART, PM25] Reading data...
19:51:26:585 -> [UART, PM25] Data not available.
19:51:26:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:585 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:585 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:606 -> [UART, PM25] Reading data...
19:51:26:606 -> [UART, PM25] Data not available.
19:51:26:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:606 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:606 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:627 -> [UART, PM25] Reading data...
19:51:26:628 -> [UART, PM25] Data not available.
19:51:26:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:628 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:628 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:648 -> [UART, PM25] Reading data...
19:51:26:648 -> [UART, PM25] Data not available.
19:51:26:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:648 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:648 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:669 -> [UART, PM25] Reading data...
19:51:26:669 -> [UART, PM25] Data not available.
19:51:26:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:669 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:669 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:690 -> [UART, PM25] Reading data...
19:51:26:691 -> [UART, PM25] Data not available.
19:51:26:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:711 -> [UART, PM25] Reading data...
19:51:26:711 -> [UART, PM25] Data not available.
19:51:26:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:711 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:711 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:732 -> [UART, PM25] Reading data...
19:51:26:732 -> [UART, PM25] Data not available.
19:51:26:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:732 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:732 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:753 -> [UART, PM25] Reading data...
19:51:26:754 -> [UART, PM25] Data not available.
19:51:26:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:754 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:754 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:774 -> [UART, PM25] Reading data...
19:51:26:774 -> [UART, PM25] Data not available.
19:51:26:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:774 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:774 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:795 -> [UART, PM25] Reading data...
19:51:26:795 -> [UART, PM25] Data not available.
19:51:26:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:795 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:795 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:816 -> [UART, PM25] Reading data...
19:51:26:816 -> [UART, PM25] Data not available.
19:51:26:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:816 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:816 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:837 -> [UART, PM25] Reading data...
19:51:26:837 -> [UART, PM25] Data not available.
19:51:26:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:837 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:837 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:865 -> [UART, PM25] Reading data...
19:51:26:865 -> [UART, PM25] Data not available.
19:51:26:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:866 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:866 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:879 -> [UART, PM25] Reading data...
19:51:26:879 -> [UART, PM25] Data not available.
19:51:26:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:879 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:879 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:900 -> [UART, PM25] Reading data...
19:51:26:900 -> [UART, PM25] Data not available.
19:51:26:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:900 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:900 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:921 -> [UART, PM25] Reading data...
19:51:26:921 -> [UART, PM25] Data not available.
19:51:26:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:921 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:921 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:942 -> [UART, PM25] Reading data...
19:51:26:942 -> [UART, PM25] Data not available.
19:51:26:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:942 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:942 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:963 -> [UART, PM25] Reading data...
19:51:26:963 -> [UART, PM25] Data not available.
19:51:26:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:963 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:963 -> [UART, PM25] Uart available, resetting event queue..
19:51:26:984 -> [UART, PM25] Reading data...
19:51:26:984 -> [UART, PM25] Data not available.
19:51:26:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:26:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:26:984 -> [UART, PM25] Uart available, clearing write errors..
19:51:26:984 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:005 -> [UART, PM25] Reading data...
19:51:27:005 -> [UART, PM25] Data not available.
19:51:27:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:005 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:005 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:026 -> [UART, PM25] Reading data...
19:51:27:026 -> [UART, PM25] Data not available.
19:51:27:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:026 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:026 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:047 -> [UART, PM25] Reading data...
19:51:27:047 -> [UART, PM25] Data not available.
19:51:27:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:047 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:047 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:068 -> [UART, PM25] Reading data...
19:51:27:069 -> [UART, PM25] Data not available.
19:51:27:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:069 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:069 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:089 -> [UART, PM25] Reading data...
19:51:27:089 -> [UART, PM25] Data not available.
19:51:27:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:089 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:089 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:110 -> [UART, PM25] Reading data...
19:51:27:110 -> [UART, PM25] Data not available.
19:51:27:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:110 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:110 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:131 -> [UART, PM25] Reading data...
19:51:27:131 -> [UART, PM25] Data not available.
19:51:27:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:131 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:131 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:152 -> [UART, PM25] Reading data...
19:51:27:152 -> [UART, PM25] Data not available.
19:51:27:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:152 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:152 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:173 -> [UART, PM25] Reading data...
19:51:27:173 -> [UART, PM25] Data not available.
19:51:27:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:173 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:173 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:194 -> [UART, PM25] Reading data...
19:51:27:194 -> [UART, PM25] Data not available.
19:51:27:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:194 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:194 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:215 -> [UART, PM25] Reading data...
19:51:27:215 -> [UART, PM25] Data not available.
19:51:27:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:215 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:215 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:278 -> [UART, PM25] Reading data...
19:51:27:278 -> [UART, PM25] Data not available.
19:51:27:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:278 -> [UART, PM25] Reading data...
19:51:27:278 -> [UART, PM25] Data not available.
19:51:27:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:278 -> [UART, PM25] Reading data...
19:51:27:278 -> [UART, PM25] Data not available.
19:51:27:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:301 -> [UART, PM25] Reading data...
19:51:27:302 -> [UART, PM25] Data not available.
19:51:27:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:302 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:302 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:320 -> [UART, PM25] Reading data...
19:51:27:320 -> [UART, PM25] Data not available.
19:51:27:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:320 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:320 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:341 -> [UART, PM25] Reading data...
19:51:27:341 -> [UART, PM25] Data not available.
19:51:27:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:341 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:341 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:362 -> [UART, PM25] Reading data...
19:51:27:362 -> [UART, PM25] Data not available.
19:51:27:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:362 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:362 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:385 -> [UART, PM25] Reading data...
19:51:27:385 -> [UART, PM25] Data not available.
19:51:27:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:385 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:385 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:404 -> [UART, PM25] Reading data...
19:51:27:404 -> [UART, PM25] Data not available.
19:51:27:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:404 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:404 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:425 -> [UART, PM25] Reading data...
19:51:27:425 -> [UART, PM25] Data not available.
19:51:27:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:425 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:425 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:446 -> [UART, PM25] Reading data...
19:51:27:446 -> [UART, PM25] Data not available.
19:51:27:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:446 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:446 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:467 -> [UART, PM25] Reading data...
19:51:27:467 -> [UART, PM25] Data not available.
19:51:27:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:467 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:467 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:488 -> [UART, PM25] Reading data...
19:51:27:489 -> [UART, PM25] Data not available.
19:51:27:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:489 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:489 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:509 -> [UART, PM25] Reading data...
19:51:27:509 -> [UART, PM25] Data not available.
19:51:27:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:510 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:510 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:530 -> [UART, PM25] Reading data...
19:51:27:530 -> [UART, PM25] Data not available.
19:51:27:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:530 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:530 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:551 -> [UART, PM25] Reading data...
19:51:27:551 -> [UART, PM25] Data not available.
19:51:27:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:551 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:551 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:574 -> [UART, PM25] Reading data...
19:51:27:574 -> [UART, PM25] Data not available.
19:51:27:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:574 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:574 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:593 -> [UART, PM25] Reading data...
19:51:27:593 -> [UART, PM25] Data not available.
19:51:27:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:593 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:593 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:614 -> [UART, PM25] Reading data...
19:51:27:615 -> [UART, PM25] Data not available.
19:51:27:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:615 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:615 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:635 -> [UART, PM25] Reading data...
19:51:27:636 -> [UART, PM25] Data not available.
19:51:27:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:636 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:636 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:656 -> [UART, PM25] Reading data...
19:51:27:656 -> [UART, PM25] Data not available.
19:51:27:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:656 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:656 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:677 -> [UART, PM25] Reading data...
19:51:27:677 -> [UART, PM25] Data not available.
19:51:27:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:677 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:677 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:698 -> [UART, PM25] Reading data...
19:51:27:698 -> [UART, PM25] Data not available.
19:51:27:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:698 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:698 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:719 -> [UART, PM25] Reading data...
19:51:27:719 -> [UART, PM25] Data not available.
19:51:27:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:719 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:719 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:740 -> [UART, PM25] Reading data...
19:51:27:740 -> [UART, PM25] Data not available.
19:51:27:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:740 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:740 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:761 -> [UART, PM25] Reading data...
19:51:27:761 -> [UART, PM25] Data not available.
19:51:27:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:761 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:761 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:782 -> [UART, PM25] Reading data...
19:51:27:782 -> [UART, PM25] Data not available.
19:51:27:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:782 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:782 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:803 -> [UART, PM25] Reading data...
19:51:27:803 -> [UART, PM25] Data not available.
19:51:27:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:803 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:803 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:824 -> [UART, PM25] Reading data...
19:51:27:824 -> [UART, PM25] Data not available.
19:51:27:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:824 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:824 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:845 -> [UART, PM25] Reading data...
19:51:27:845 -> [UART, PM25] Data not available.
19:51:27:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:845 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:845 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:866 -> [UART, PM25] Reading data...
19:51:27:866 -> [UART, PM25] Data not available.
19:51:27:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:866 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:866 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:897 -> [UART, PM25] Reading data...
19:51:27:897 -> [UART, PM25] Data not available.
19:51:27:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:908 -> [UART, PM25] Reading data...
19:51:27:908 -> [UART, PM25] Data not available.
19:51:27:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:908 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:908 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:929 -> [UART, PM25] Reading data...
19:51:27:929 -> [UART, PM25] Data not available.
19:51:27:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:929 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:929 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:950 -> [UART, PM25] Reading data...
19:51:27:951 -> [UART, PM25] Data not available.
19:51:27:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:951 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:951 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:971 -> [UART, PM25] Reading data...
19:51:27:972 -> [UART, PM25] Data not available.
19:51:27:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:972 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:972 -> [UART, PM25] Uart available, resetting event queue..
19:51:27:992 -> [UART, PM25] Reading data...
19:51:27:992 -> [UART, PM25] Data not available.
19:51:27:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:27:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:27:992 -> [UART, PM25] Uart available, clearing write errors..
19:51:27:992 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:013 -> [UART, PM25] Reading data...
19:51:28:013 -> [UART, PM25] Data not available.
19:51:28:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:013 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:013 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:034 -> [UART, PM25] Reading data...
19:51:28:035 -> [UART, PM25] Data not available.
19:51:28:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:035 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:035 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:055 -> [UART, PM25] Reading data...
19:51:28:055 -> [UART, PM25] Data not available.
19:51:28:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:055 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:055 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:076 -> [UART, PM25] Reading data...
19:51:28:076 -> [UART, PM25] Data not available.
19:51:28:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:076 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:076 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:097 -> [UART, PM25] Reading data...
19:51:28:097 -> [UART, PM25] Data not available.
19:51:28:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:097 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:097 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:118 -> [UART, PM25] Reading data...
19:51:28:119 -> [UART, PM25] Data not available.
19:51:28:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:119 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:119 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:139 -> [UART, PM25] Reading data...
19:51:28:139 -> [UART, PM25] Data not available.
19:51:28:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:139 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:139 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:160 -> [UART, PM25] Reading data...
19:51:28:161 -> [UART, PM25] Data not available.
19:51:28:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:161 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:161 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:181 -> [UART, PM25] Reading data...
19:51:28:181 -> [UART, PM25] Data not available.
19:51:28:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:181 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:181 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:202 -> [UART, PM25] Reading data...
19:51:28:203 -> [UART, PM25] Data not available.
19:51:28:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:203 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:203 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:223 -> [UART, PM25] Reading data...
19:51:28:223 -> [UART, PM25] Data not available.
19:51:28:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:223 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:223 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:244 -> [UART, PM25] Reading data...
19:51:28:244 -> [UART, PM25] Data not available.
19:51:28:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:244 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:244 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:265 -> [UART, PM25] Reading data...
19:51:28:265 -> [UART, PM25] Data not available.
19:51:28:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:265 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:265 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:286 -> [UART, PM25] Reading data...
19:51:28:286 -> [UART, PM25] Data not available.
19:51:28:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:286 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:286 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:307 -> [UART, PM25] Reading data...
19:51:28:307 -> [UART, PM25] Data not available.
19:51:28:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:307 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:307 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:328 -> [UART, PM25] Reading data...
19:51:28:328 -> [UART, PM25] Data not available.
19:51:28:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:328 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:328 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:349 -> [UART, PM25] Reading data...
19:51:28:349 -> [UART, PM25] Data not available.
19:51:28:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:349 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:349 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:370 -> [UART, PM25] Reading data...
19:51:28:370 -> [UART, PM25] Data not available.
19:51:28:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:370 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:370 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:391 -> [UART, PM25] Reading data...
19:51:28:391 -> [UART, PM25] Data not available.
19:51:28:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:391 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:391 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:412 -> [UART, PM25] Reading data...
19:51:28:412 -> [UART, PM25] Data not available.
19:51:28:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:412 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:412 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:433 -> [UART, PM25] Reading data...
19:51:28:433 -> [UART, PM25] Data not available.
19:51:28:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:433 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:433 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:454 -> [UART, PM25] Reading data...
19:51:28:455 -> [UART, PM25] Data not available.
19:51:28:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:455 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:455 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:475 -> [UART, PM25] Reading data...
19:51:28:475 -> [UART, PM25] Data not available.
19:51:28:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:475 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:475 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:496 -> [UART, PM25] Reading data...
19:51:28:496 -> [UART, PM25] Data not available.
19:51:28:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:496 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:496 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:517 -> [UART, PM25] Reading data...
19:51:28:518 -> [UART, PM25] Data not available.
19:51:28:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:518 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:518 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:541 -> [UART, PM25] Reading data...
19:51:28:542 -> [UART, PM25] Data not available.
19:51:28:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:542 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:542 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:559 -> [UART, PM25] Reading data...
19:51:28:559 -> [UART, PM25] Data not available.
19:51:28:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:559 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:559 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:560 -> PING!
19:51:28:773 -> [UART, PM25] Reading data...
19:51:28:773 -> [UART, PM25] Data not available.
19:51:28:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:773 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:773 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:794 -> [UART, PM25] Reading data...
19:51:28:794 -> [UART, PM25] Data not available.
19:51:28:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:794 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:794 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:815 -> [UART, PM25] Reading data...
19:51:28:816 -> [UART, PM25] Data not available.
19:51:28:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:816 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:816 -> [UART, PM25] Uart available, resetting event queue..

19:51:28:836 -> [UART, PM25] Data not available.
19:51:28:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:836 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:836 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:836 -> [UART, PM25] Reading data...19:51:28:862 -> [UART, PM25] Reading data...
19:51:28:863 -> [UART, PM25] Data not available.
19:51:28:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:863 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:863 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:878 -> [UART, PM25] Reading data...
19:51:28:878 -> [UART, PM25] Data not available.
19:51:28:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:878 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:878 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:899 -> [UART, PM25] Reading data...
19:51:28:900 -> [UART, PM25] Data not available.
19:51:28:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:900 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:900 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:928 -> [UART, PM25] Reading data...
19:51:28:929 -> [UART, PM25] Data not available.
19:51:28:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:929 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:929 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:941 -> [UART, PM25] Reading data...
19:51:28:941 -> [UART, PM25] Data not available.
19:51:28:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:941 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:941 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:962 -> [UART, PM25] Reading data...
19:51:28:963 -> [UART, PM25] Data not available.
19:51:28:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:963 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:963 -> [UART, PM25] Uart available, resetting event queue..
19:51:28:983 -> [UART, PM25] Reading data...
19:51:28:983 -> [UART, PM25] Data not available.
19:51:28:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:28:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:28:983 -> [UART, PM25] Uart available, clearing write errors..
19:51:28:983 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:004 -> [UART, PM25] Reading data...
19:51:29:004 -> [UART, PM25] Data not available.
19:51:29:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:004 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:004 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:025 -> [UART, PM25] Reading data...
19:51:29:025 -> [UART, PM25] Data not available.
19:51:29:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:025 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:025 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:046 -> [UART, PM25] Reading data...
19:51:29:046 -> [UART, PM25] Data not available.
19:51:29:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:046 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:046 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:067 -> [UART, PM25] Reading data...
19:51:29:067 -> [UART, PM25] Data not available.
19:51:29:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:067 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:067 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:088 -> [UART, PM25] Reading data...
19:51:29:088 -> [UART, PM25] Data not available.
19:51:29:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:088 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:088 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:109 -> [UART, PM25] Reading data...
19:51:29:109 -> [UART, PM25] Data not available.
19:51:29:109 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:109 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:109 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:109 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:130 -> [UART, PM25] Reading data...
19:51:29:130 -> [UART, PM25] Data not available.
19:51:29:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:130 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:130 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:151 -> [UART, PM25] Reading data...
19:51:29:151 -> [UART, PM25] Data not available.
19:51:29:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:152 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:152 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:172 -> [UART, PM25] Reading data...
19:51:29:173 -> [UART, PM25] Data not available.
19:51:29:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:173 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:173 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:193 -> [UART, PM25] Reading data...
19:51:29:193 -> [UART, PM25] Data not available.
19:51:29:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:193 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:193 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:214 -> [UART, PM25] Reading data...
19:51:29:214 -> [UART, PM25] Data not available.
19:51:29:214 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:214 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:214 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:214 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:273 -> [UART, PM25] Reading data...
19:51:29:275 -> [UART, PM25] Data not available.
19:51:29:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:275 -> [UART, PM25] Reading data...
19:51:29:275 -> [UART, PM25] Data not available.
19:51:29:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:278 -> [UART, PM25] Reading data...
19:51:29:278 -> [UART, PM25] Data not available.
19:51:29:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:278 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:278 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:298 -> [UART, PM25] Reading data...
19:51:29:298 -> [UART, PM25] Data not available.
19:51:29:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:298 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:298 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:319 -> [UART, PM25] Reading data...
19:51:29:319 -> [UART, PM25] Data not available.
19:51:29:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:319 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:319 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:340 -> [UART, PM25] Reading data...
19:51:29:340 -> [UART, PM25] Data not available.
19:51:29:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:340 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:340 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:361 -> [UART, PM25] Reading data...
19:51:29:361 -> [UART, PM25] Data not available.
19:51:29:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:361 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:361 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:382 -> [UART, PM25] Reading data...
19:51:29:382 -> [UART, PM25] Data not available.
19:51:29:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:382 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:382 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:403 -> [UART, PM25] Reading data...
19:51:29:403 -> [UART, PM25] Data not available.
19:51:29:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:403 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:403 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:424 -> [UART, PM25] Reading data...
19:51:29:424 -> [UART, PM25] Data not available.
19:51:29:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:424 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:424 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:445 -> [UART, PM25] Reading data...
19:51:29:445 -> [UART, PM25] Data not available.
19:51:29:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:445 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:445 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:466 -> [UART, PM25] Reading data...
19:51:29:466 -> [UART, PM25] Data not available.
19:51:29:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:466 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:466 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:487 -> [UART, PM25] Reading data...
19:51:29:487 -> [UART, PM25] Data not available.
19:51:29:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:487 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:487 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:508 -> [UART, PM25] Reading data...
19:51:29:509 -> [UART, PM25] Data not available.
19:51:29:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:509 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:509 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:529 -> [UART, PM25] Reading data...
19:51:29:529 -> [UART, PM25] Data not available.
19:51:29:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:529 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:529 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:550 -> [UART, PM25] Reading data...
19:51:29:550 -> [UART, PM25] Data not available.
19:51:29:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:550 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:550 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:571 -> [UART, PM25] Reading data...
19:51:29:571 -> [UART, PM25] Data not available.
19:51:29:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:571 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:571 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:592 -> [UART, PM25] Reading data...
19:51:29:592 -> [UART, PM25] Data not available.
19:51:29:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:592 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:592 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:613 -> [UART, PM25] Reading data...
19:51:29:613 -> [UART, PM25] Data not available.
19:51:29:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:613 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:613 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:634 -> [UART, PM25] Reading data...
19:51:29:634 -> [UART, PM25] Data not available.
19:51:29:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:634 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:634 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:655 -> [UART, PM25] Reading data...
19:51:29:655 -> [UART, PM25] Data not available.
19:51:29:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:655 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:655 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:676 -> [UART, PM25] Reading data...
19:51:29:676 -> [UART, PM25] Data not available.
19:51:29:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:676 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:676 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:697 -> [UART, PM25] Reading data...
19:51:29:698 -> [UART, PM25] Data not available.
19:51:29:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:698 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:698 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:718 -> [UART, PM25] Reading data...
19:51:29:718 -> [UART, PM25] Data not available.
19:51:29:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:718 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:718 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:739 -> [UART, PM25] Reading data...
19:51:29:739 -> [UART, PM25] Data not available.
19:51:29:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:739 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:739 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:760 -> [UART, PM25] Reading data...
19:51:29:760 -> [UART, PM25] Data not available.
19:51:29:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:760 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:760 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:781 -> [UART, PM25] Reading data...
19:51:29:781 -> [UART, PM25] Data not available.
19:51:29:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:781 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:781 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:802 -> [UART, PM25] Reading data...
19:51:29:802 -> [UART, PM25] Data not available.
19:51:29:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:802 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:802 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:823 -> [UART, PM25] Reading data...
19:51:29:823 -> [UART, PM25] Data not available.
19:51:29:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:823 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:823 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:844 -> [UART, PM25] Reading data...
19:51:29:844 -> [UART, PM25] Data not available.
19:51:29:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:844 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:844 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:865 -> [UART, PM25] Reading data...
19:51:29:866 -> [UART, PM25] Data not available.
19:51:29:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:866 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:866 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:888 -> [UART, PM25] Reading data...
19:51:29:889 -> [UART, PM25] Data not available.
19:51:29:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:889 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:889 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:907 -> [UART, PM25] Reading data...
19:51:29:907 -> [UART, PM25] Data not available.
19:51:29:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:907 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:907 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:928 -> [UART, PM25] Reading data...
19:51:29:928 -> [UART, PM25] Data not available.
19:51:29:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:928 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:928 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:959 -> [UART, PM25] Reading data...
19:51:29:959 -> [UART, PM25] Data not available.
19:51:29:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:959 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:959 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:970 -> [UART, PM25] Reading data...
19:51:29:970 -> [UART, PM25] Data not available.
19:51:29:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:970 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:970 -> [UART, PM25] Uart available, resetting event queue..
19:51:29:991 -> [UART, PM25] Reading data...
19:51:29:991 -> [UART, PM25] Data not available.
19:51:29:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:29:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:29:991 -> [UART, PM25] Uart available, clearing write errors..
19:51:29:991 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:012 -> [UART, PM25] Reading data...
19:51:30:012 -> [UART, PM25] Data not available.
19:51:30:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:012 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:012 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:033 -> [UART, PM25] Reading data...
19:51:30:033 -> [UART, PM25] Data not available.
19:51:30:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:033 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:033 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:054 -> [UART, PM25] Reading data...
19:51:30:054 -> [UART, PM25] Data not available.
19:51:30:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:054 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:054 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:075 -> [UART, PM25] Reading data...
19:51:30:075 -> [UART, PM25] Data not available.
19:51:30:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:075 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:075 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:096 -> [UART, PM25] Reading data...
19:51:30:096 -> [UART, PM25] Data not available.
19:51:30:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:096 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:096 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:117 -> [UART, PM25] Reading data...
19:51:30:118 -> [UART, PM25] Data not available.
19:51:30:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:118 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:118 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:138 -> [UART, PM25] Reading data...
19:51:30:138 -> [UART, PM25] Data not available.
19:51:30:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:138 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:138 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:159 -> [UART, PM25] Reading data...
19:51:30:159 -> [UART, PM25] Data not available.
19:51:30:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:159 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:159 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:180 -> [UART, PM25] Reading data...
19:51:30:181 -> [UART, PM25] Data not available.
19:51:30:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:181 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:181 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:201 -> [UART, PM25] Reading data...
19:51:30:201 -> [UART, PM25] Data not available.
19:51:30:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:201 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:201 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:222 -> [UART, PM25] Reading data...
19:51:30:222 -> [UART, PM25] Data not available.
19:51:30:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:222 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:222 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:243 -> [UART, PM25] Reading data...
19:51:30:243 -> [UART, PM25] Data not available.
19:51:30:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:243 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:243 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:264 -> [UART, PM25] Reading data...
19:51:30:264 -> [UART, PM25] Data not available.
19:51:30:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:264 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:264 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:285 -> [UART, PM25] Reading data...
19:51:30:286 -> [UART, PM25] Data not available.
19:51:30:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:286 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:286 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:306 -> [UART, PM25] Reading data...
19:51:30:307 -> [UART, PM25] Data not available.
19:51:30:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:307 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:307 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:327 -> [UART, PM25] Reading data...
19:51:30:327 -> [UART, PM25] Data not available.
19:51:30:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:327 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:327 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:348 -> [UART, PM25] Reading data...
19:51:30:349 -> [UART, PM25] Data not available.
19:51:30:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:349 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:349 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:369 -> [UART, PM25] Reading data...
19:51:30:369 -> [UART, PM25] Data not available.
19:51:30:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:369 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:369 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:390 -> [UART, PM25] Reading data...
19:51:30:390 -> [UART, PM25] Data not available.
19:51:30:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:390 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:390 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:411 -> [UART, PM25] Reading data...
19:51:30:411 -> [UART, PM25] Data not available.
19:51:30:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:411 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:411 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:432 -> [UART, PM25] Reading data...
19:51:30:432 -> [UART, PM25] Data not available.
19:51:30:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:432 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:432 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:453 -> [UART, PM25] Reading data...
19:51:30:453 -> [UART, PM25] Data not available.
19:51:30:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:453 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:453 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:480 -> [UART, PM25] Reading data...
19:51:30:480 -> [UART, PM25] Data not available.
19:51:30:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:480 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:480 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:495 -> [UART, PM25] Reading data...
19:51:30:495 -> [UART, PM25] Data not available.
19:51:30:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:495 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:495 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:516 -> [UART, PM25] Reading data...
19:51:30:516 -> [UART, PM25] Data not available.
19:51:30:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:537 -> [UART, PM25] Reading data...
19:51:30:537 -> [UART, PM25] Data not available.
19:51:30:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:537 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:537 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:558 -> [UART, PM25] Reading data...
19:51:30:558 -> [UART, PM25] Data not available.
19:51:30:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:558 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:558 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:579 -> [UART, PM25] Reading data...
19:51:30:579 -> [UART, PM25] Data not available.
19:51:30:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:579 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:579 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:600 -> [UART, PM25] Reading data...
19:51:30:601 -> [UART, PM25] Data not available.
19:51:30:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:621 -> [UART, PM25] Reading data...
19:51:30:621 -> [UART, PM25] Data not available.
19:51:30:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:621 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:621 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:642 -> [UART, PM25] Reading data...
19:51:30:642 -> [UART, PM25] Data not available.
19:51:30:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:642 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:642 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:663 -> [UART, PM25] Reading data...
19:51:30:663 -> [UART, PM25] Data not available.
19:51:30:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:663 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:663 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:684 -> [UART, PM25] Reading data...
19:51:30:684 -> [UART, PM25] Data not available.
19:51:30:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:684 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:684 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:705 -> [UART, PM25] Reading data...
19:51:30:705 -> [UART, PM25] Data not available.
19:51:30:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:705 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:705 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:726 -> [UART, PM25] Reading data...
19:51:30:726 -> [UART, PM25] Data not available.
19:51:30:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:726 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:726 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:747 -> [UART, PM25] Reading data...
19:51:30:747 -> [UART, PM25] Data not available.
19:51:30:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:747 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:747 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:768 -> [UART, PM25] Reading data...
19:51:30:769 -> [UART, PM25] Data not available.
19:51:30:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:769 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:769 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:789 -> [UART, PM25] Reading data...
19:51:30:789 -> [UART, PM25] Data not available.
19:51:30:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:789 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:789 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:810 -> [UART, PM25] Reading data...
19:51:30:810 -> [UART, PM25] Data not available.
19:51:30:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:810 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:810 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:831 -> [UART, PM25] Reading data...
19:51:30:831 -> [UART, PM25] Data not available.
19:51:30:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:831 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:831 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:852 -> [UART, PM25] Reading data...
19:51:30:852 -> [UART, PM25] Data not available.
19:51:30:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:852 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:852 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:873 -> [UART, PM25] Reading data...
19:51:30:873 -> [UART, PM25] Data not available.
19:51:30:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:873 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:873 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:894 -> [UART, PM25] Reading data...
19:51:30:894 -> [UART, PM25] Data not available.
19:51:30:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:894 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:894 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:915 -> [UART, PM25] Reading data...
19:51:30:918 -> [UART, PM25] Data not available.
19:51:30:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:936 -> [UART, PM25] Reading data...
19:51:30:936 -> [UART, PM25] Data not available.
19:51:30:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:936 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:936 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:957 -> [UART, PM25] Reading data...
19:51:30:957 -> [UART, PM25] Data not available.
19:51:30:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:957 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:957 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:978 -> [UART, PM25] Reading data...
19:51:30:978 -> [UART, PM25] Data not available.
19:51:30:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:978 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:978 -> [UART, PM25] Uart available, resetting event queue..
19:51:30:999 -> [UART, PM25] Reading data...
19:51:30:999 -> [UART, PM25] Data not available.
19:51:30:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:30:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:30:999 -> [UART, PM25] Uart available, clearing write errors..
19:51:30:999 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:020 -> [UART, PM25] Reading data...
19:51:31:020 -> [UART, PM25] Data not available.
19:51:31:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:020 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:020 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:041 -> [UART, PM25] Reading data...
19:51:31:041 -> [UART, PM25] Data not available.
19:51:31:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:041 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:041 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:062 -> [UART, PM25] Reading data...
19:51:31:062 -> [UART, PM25] Data not available.
19:51:31:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:062 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:062 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:103 -> [UART, PM25] Reading data...
19:51:31:124 -> [UART, PM25] Data not available.
19:51:31:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:124 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:124 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:124 -> [UART, PM25] Reading data...
19:51:31:124 -> [UART, PM25] Data not available.
19:51:31:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:124 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:124 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:125 -> [UART, PM25] Reading data...
19:51:31:125 -> [UART, PM25] Data not available.
19:51:31:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:125 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:125 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:146 -> [UART, PM25] Reading data...
19:51:31:146 -> [UART, PM25] Data not available.
19:51:31:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:146 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:146 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:168 -> [UART, PM25] Reading data...
19:51:31:171 -> [UART, PM25] Data not available.
19:51:31:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:171 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:171 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:188 -> [UART, PM25] Reading data...
19:51:31:188 -> [UART, PM25] Data not available.
19:51:31:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:188 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:188 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:209 -> [UART, PM25] Reading data...
19:51:31:209 -> [UART, PM25] Data not available.
19:51:31:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:209 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:209 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:230 -> [UART, PM25] Reading data...
19:51:31:230 -> [UART, PM25] Data not available.
19:51:31:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:230 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:230 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:251 -> [UART, PM25] Reading data...
19:51:31:251 -> [UART, PM25] Data not available.
19:51:31:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:251 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:251 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:272 -> [UART, PM25] Reading data...
19:51:31:272 -> [UART, PM25] Data not available.
19:51:31:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:272 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:272 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:293 -> [UART, PM25] Reading data...
19:51:31:293 -> [UART, PM25] Data not available.
19:51:31:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:293 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:293 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:317 -> [UART, PM25] Reading data...
19:51:31:317 -> [UART, PM25] Data not available.
19:51:31:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:335 -> [UART, PM25] Reading data...
19:51:31:335 -> [UART, PM25] Data not available.
19:51:31:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:335 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:335 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:356 -> [UART, PM25] Reading data...
19:51:31:356 -> [UART, PM25] Data not available.
19:51:31:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:356 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:356 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:377 -> [UART, PM25] Reading data...
19:51:31:377 -> [UART, PM25] Data not available.
19:51:31:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:377 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:377 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:398 -> [UART, PM25] Reading data...
19:51:31:398 -> [UART, PM25] Data not available.
19:51:31:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:398 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:398 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:419 -> [UART, PM25] Reading data...
19:51:31:420 -> [UART, PM25] Data not available.
19:51:31:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:420 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:420 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:442 -> [UART, PM25] Reading data...
19:51:31:443 -> [UART, PM25] Data not available.
19:51:31:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:461 -> [UART, PM25] Reading data...
19:51:31:461 -> [UART, PM25] Data not available.
19:51:31:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:461 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:461 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:482 -> [UART, PM25] Reading data...
19:51:31:482 -> [UART, PM25] Data not available.
19:51:31:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:482 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:482 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:515 -> [UART, PM25] Reading data...
19:51:31:516 -> [UART, PM25] Data not available.
19:51:31:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:524 -> [UART, PM25] Reading data...
19:51:31:524 -> [UART, PM25] Data not available.
19:51:31:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:524 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:524 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:545 -> [UART, PM25] Reading data...
19:51:31:545 -> [UART, PM25] Data not available.
19:51:31:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:545 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:545 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:566 -> [UART, PM25] Reading data...
19:51:31:566 -> [UART, PM25] Data not available.
19:51:31:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:566 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:566 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:587 -> [UART, PM25] Reading data...
19:51:31:587 -> [UART, PM25] Data not available.
19:51:31:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:587 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:587 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:608 -> [UART, PM25] Reading data...
19:51:31:608 -> [UART, PM25] Data not available.
19:51:31:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:608 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:608 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:629 -> [UART, PM25] Reading data...
19:51:31:629 -> [UART, PM25] Data not available.
19:51:31:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:629 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:629 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:650 -> [UART, PM25] Reading data...
19:51:31:650 -> [UART, PM25] Data not available.
19:51:31:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:650 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:650 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:671 -> [UART, PM25] Reading data...
19:51:31:671 -> [UART, PM25] Data not available.
19:51:31:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:671 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:671 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:692 -> [UART, PM25] Reading data...
19:51:31:692 -> [UART, PM25] Data not available.
19:51:31:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:692 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:692 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:713 -> [UART, PM25] Reading data...
19:51:31:713 -> [UART, PM25] Data not available.
19:51:31:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:713 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:713 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:734 -> [UART, PM25] Reading data...
19:51:31:734 -> [UART, PM25] Data not available.
19:51:31:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:734 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:734 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:755 -> [UART, PM25] Reading data...
19:51:31:755 -> [UART, PM25] Data not available.
19:51:31:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:755 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:755 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:776 -> [UART, PM25] Reading data...
19:51:31:776 -> [UART, PM25] Data not available.
19:51:31:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:776 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:776 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:797 -> [UART, PM25] Reading data...
19:51:31:797 -> [UART, PM25] Data not available.
19:51:31:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:797 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:797 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:818 -> [UART, PM25] Reading data...
19:51:31:818 -> [UART, PM25] Data not available.
19:51:31:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:818 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:818 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:839 -> [UART, PM25] Reading data...
19:51:31:839 -> [UART, PM25] Data not available.
19:51:31:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:839 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:839 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:860 -> [UART, PM25] Reading data...
19:51:31:861 -> [UART, PM25] Data not available.
19:51:31:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:861 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:861 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:881 -> [UART, PM25] Reading data...
19:51:31:882 -> [UART, PM25] Data not available.
19:51:31:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:882 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:882 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:902 -> [UART, PM25] Reading data...
19:51:31:902 -> [UART, PM25] Data not available.
19:51:31:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:902 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:902 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:923 -> [UART, PM25] Reading data...
19:51:31:923 -> [UART, PM25] Data not available.
19:51:31:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:923 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:923 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:944 -> [UART, PM25] Reading data...
19:51:31:944 -> [UART, PM25] Data not available.
19:51:31:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:944 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:944 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:965 -> [UART, PM25] Reading data...
19:51:31:965 -> [UART, PM25] Data not available.
19:51:31:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:965 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:965 -> [UART, PM25] Uart available, resetting event queue..
19:51:31:986 -> [UART, PM25] Reading data...
19:51:31:986 -> [UART, PM25] Data not available.
19:51:31:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:31:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:31:986 -> [UART, PM25] Uart available, clearing write errors..
19:51:31:986 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:007 -> [UART, PM25] Reading data...
19:51:32:007 -> [UART, PM25] Data not available.
19:51:32:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:007 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:007 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:032 -> [UART, PM25] Reading data...
19:51:32:033 -> [UART, PM25] Data not available.
19:51:32:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:033 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:033 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:049 -> [UART, PM25] Reading data...
19:51:32:049 -> [UART, PM25] Data not available.
19:51:32:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:049 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:049 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:071 -> [UART, PM25] Reading data...
19:51:32:072 -> [UART, PM25] Data not available.
19:51:32:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:072 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:072 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:091 -> [UART, PM25] Reading data...
19:51:32:091 -> [UART, PM25] Data not available.
19:51:32:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:091 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:091 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:112 -> [UART, PM25] Reading data...
19:51:32:112 -> [UART, PM25] Data not available.
19:51:32:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:112 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:112 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:133 -> [UART, PM25] Reading data...
19:51:32:133 -> [UART, PM25] Data not available.
19:51:32:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:133 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:133 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:154 -> [UART, PM25] Reading data...
19:51:32:154 -> [UART, PM25] Data not available.
19:51:32:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:154 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:154 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:175 -> [UART, PM25] Reading data...
19:51:32:175 -> [UART, PM25] Data not available.
19:51:32:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:175 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:175 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:196 -> [UART, PM25] Reading data...
19:51:32:196 -> [UART, PM25] Data not available.
19:51:32:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:196 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:196 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:217 -> [UART, PM25] Reading data...
19:51:32:217 -> [UART, PM25] Data not available.
19:51:32:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:217 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:217 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:238 -> [UART, PM25] Reading data...
19:51:32:238 -> [UART, PM25] Data not available.
19:51:32:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:238 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:238 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:259 -> [UART, PM25] Reading data...
19:51:32:259 -> [UART, PM25] Data not available.
19:51:32:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:259 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:259 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:280 -> [UART, PM25] Reading data...
19:51:32:280 -> [UART, PM25] Data not available.
19:51:32:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:280 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:280 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:301 -> [UART, PM25] Reading data...
19:51:32:301 -> [UART, PM25] Data not available.
19:51:32:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:301 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:301 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:322 -> [UART, PM25] Reading data...
19:51:32:322 -> [UART, PM25] Data not available.
19:51:32:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:322 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:322 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:343 -> [UART, PM25] Reading data...
19:51:32:343 -> [UART, PM25] Data not available.
19:51:32:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:343 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:343 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:364 -> [UART, PM25] Reading data...
19:51:32:365 -> [UART, PM25] Data not available.
19:51:32:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:365 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:365 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:385 -> [UART, PM25] Reading data...
19:51:32:385 -> [UART, PM25] Data not available.
19:51:32:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:385 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:385 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:406 -> [UART, PM25] Reading data...
19:51:32:406 -> [UART, PM25] Data not available.
19:51:32:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:406 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:406 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:427 -> [UART, PM25] Reading data...
19:51:32:427 -> [UART, PM25] Data not available.
19:51:32:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:427 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:427 -> [UART, PM25] Uart available, resetting event queue..

19:51:32:469 -> [UART, PM25] Data not available.
19:51:32:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:469 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:469 -> [UART, PM25] Uart available, resetting event queue..

19:51:32:448 -> [UART, PM25] Data not available.
19:51:32:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:448 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:448 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:469 -> [UART, PM25] Reading data...19:51:32:448 -> [UART, PM25] Reading data...19:51:32:490 -> [UART, PM25] Reading data...
19:51:32:490 -> [UART, PM25] Data not available.
19:51:32:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:490 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:490 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:511 -> [UART, PM25] Reading data...
19:51:32:511 -> [UART, PM25] Data not available.
19:51:32:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:511 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:511 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:544 -> [UART, PM25] Reading data...
19:51:32:545 -> [UART, PM25] Data not available.
19:51:32:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:545 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:545 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:553 -> [UART, PM25] Reading data...
19:51:32:553 -> [UART, PM25] Data not available.
19:51:32:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:553 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:553 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:574 -> [UART, PM25] Reading data...
19:51:32:574 -> [UART, PM25] Data not available.
19:51:32:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:574 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:574 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:595 -> [UART, PM25] Reading data...
19:51:32:595 -> [UART, PM25] Data not available.
19:51:32:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:595 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:595 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:616 -> [UART, PM25] Reading data...
19:51:32:616 -> [UART, PM25] Data not available.
19:51:32:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:616 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:616 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:637 -> [UART, PM25] Reading data...
19:51:32:637 -> [UART, PM25] Data not available.
19:51:32:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:637 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:637 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:658 -> [UART, PM25] Reading data...
19:51:32:658 -> [UART, PM25] Data not available.
19:51:32:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:679 -> [UART, PM25] Reading data...
19:51:32:679 -> [UART, PM25] Data not available.
19:51:32:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:679 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:679 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:700 -> [UART, PM25] Reading data...
19:51:32:701 -> [UART, PM25] Data not available.
19:51:32:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:701 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:701 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:721 -> [UART, PM25] Reading data...
19:51:32:721 -> [UART, PM25] Data not available.
19:51:32:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:721 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:721 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:742 -> [UART, PM25] Reading data...
19:51:32:742 -> [UART, PM25] Data not available.
19:51:32:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:742 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:742 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:763 -> [UART, PM25] Reading data...
19:51:32:763 -> [UART, PM25] Data not available.
19:51:32:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:763 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:763 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:784 -> [UART, PM25] Reading data...
19:51:32:784 -> [UART, PM25] Data not available.
19:51:32:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:805 -> [UART, PM25] Reading data...
19:51:32:805 -> [UART, PM25] Data not available.
19:51:32:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:805 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:805 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:826 -> [UART, PM25] Reading data...
19:51:32:826 -> [UART, PM25] Data not available.
19:51:32:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:826 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:826 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:847 -> [UART, PM25] Reading data...
19:51:32:847 -> [UART, PM25] Data not available.
19:51:32:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:847 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:847 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:868 -> [UART, PM25] Reading data...
19:51:32:868 -> [UART, PM25] Data not available.
19:51:32:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:868 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:868 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:921 -> [UART, PM25] Reading data...
19:51:32:931 -> [UART, PM25] Data not available.
19:51:32:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:931 -> [UART, PM25] Reading data...
19:51:32:931 -> [UART, PM25] Data not available.
19:51:32:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:931 -> [UART, PM25] Reading data...
19:51:32:931 -> [UART, PM25] Data not available.
19:51:32:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:952 -> [UART, PM25] Reading data...
19:51:32:952 -> [UART, PM25] Data not available.
19:51:32:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:952 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:952 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:973 -> [UART, PM25] Reading data...
19:51:32:974 -> [UART, PM25] Data not available.
19:51:32:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:974 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:974 -> [UART, PM25] Uart available, resetting event queue..
19:51:32:994 -> [UART, PM25] Reading data...
19:51:32:994 -> [UART, PM25] Data not available.
19:51:32:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:32:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:32:994 -> [UART, PM25] Uart available, clearing write errors..
19:51:32:994 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:015 -> [UART, PM25] Reading data...
19:51:33:015 -> [UART, PM25] Data not available.
19:51:33:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:036 -> [UART, PM25] Reading data...
19:51:33:036 -> [UART, PM25] Data not available.
19:51:33:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:058 -> [UART, PM25] Reading data...
19:51:33:059 -> [UART, PM25] Data not available.
19:51:33:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:059 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:059 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:078 -> [UART, PM25] Reading data...
19:51:33:078 -> [UART, PM25] Data not available.
19:51:33:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:099 -> [UART, PM25] Reading data...
19:51:33:099 -> [UART, PM25] Data not available.
19:51:33:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:099 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:099 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:120 -> [UART, PM25] Reading data...
19:51:33:121 -> [UART, PM25] Data not available.
19:51:33:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:121 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:121 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:141 -> [UART, PM25] Reading data...
19:51:33:141 -> [UART, PM25] Data not available.
19:51:33:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:162 -> [UART, PM25] Reading data...
19:51:33:162 -> [UART, PM25] Data not available.
19:51:33:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:183 -> [UART, PM25] Reading data...
19:51:33:184 -> [UART, PM25] Data not available.
19:51:33:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:184 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:184 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:204 -> [UART, PM25] Reading data...
19:51:33:204 -> [UART, PM25] Data not available.
19:51:33:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:204 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:204 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:225 -> [UART, PM25] Reading data...
19:51:33:225 -> [UART, PM25] Data not available.
19:51:33:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:225 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:225 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:246 -> [UART, PM25] Reading data...
19:51:33:246 -> [UART, PM25] Data not available.
19:51:33:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:246 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:246 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:267 -> [UART, PM25] Reading data...
19:51:33:267 -> [UART, PM25] Data not available.
19:51:33:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:267 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:267 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:267 -> PING!
19:51:33:481 -> [UART, PM25] Reading data...
19:51:33:481 -> [UART, PM25] Data not available.
19:51:33:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:481 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:481 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:502 -> [UART, PM25] Reading data...
19:51:33:502 -> [UART, PM25] Data not available.
19:51:33:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:502 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:502 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:523 -> [UART, PM25] Reading data...
19:51:33:524 -> [UART, PM25] Data not available.
19:51:33:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:524 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:524 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:544 -> [UART, PM25] Reading data...
19:51:33:544 -> [UART, PM25] Data not available.
19:51:33:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:544 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:544 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:580 -> [UART, PM25] Reading data...
19:51:33:581 -> [UART, PM25] Data not available.
19:51:33:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:581 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:581 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:586 -> [UART, PM25] Reading data...
19:51:33:587 -> [UART, PM25] Data not available.
19:51:33:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:587 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:587 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:607 -> [UART, PM25] Reading data...
19:51:33:607 -> [UART, PM25] Data not available.
19:51:33:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:607 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:607 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:628 -> [UART, PM25] Reading data...
19:51:33:632 -> [UART, PM25] Data not available.
19:51:33:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:632 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:632 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:649 -> [UART, PM25] Reading data...
19:51:33:650 -> [UART, PM25] Data not available.
19:51:33:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:650 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:650 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:670 -> [UART, PM25] Reading data...
19:51:33:670 -> [UART, PM25] Data not available.
19:51:33:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:670 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:670 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:691 -> [UART, PM25] Reading data...
19:51:33:691 -> [UART, PM25] Data not available.
19:51:33:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:712 -> [UART, PM25] Reading data...
19:51:33:712 -> [UART, PM25] Data not available.
19:51:33:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:712 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:712 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:733 -> [UART, PM25] Reading data...
19:51:33:733 -> [UART, PM25] Data not available.
19:51:33:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:733 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:733 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:754 -> [UART, PM25] Reading data...
19:51:33:754 -> [UART, PM25] Data not available.
19:51:33:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:754 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:754 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:775 -> [UART, PM25] Reading data...
19:51:33:775 -> [UART, PM25] Data not available.
19:51:33:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:775 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:775 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:796 -> [UART, PM25] Reading data...
19:51:33:796 -> [UART, PM25] Data not available.
19:51:33:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:796 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:796 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:817 -> [UART, PM25] Reading data...
19:51:33:817 -> [UART, PM25] Data not available.
19:51:33:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:817 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:817 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:838 -> [UART, PM25] Reading data...
19:51:33:838 -> [UART, PM25] Data not available.
19:51:33:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:838 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:838 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:859 -> [UART, PM25] Reading data...
19:51:33:860 -> [UART, PM25] Data not available.
19:51:33:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:860 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:860 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:880 -> [UART, PM25] Reading data...
19:51:33:880 -> [UART, PM25] Data not available.
19:51:33:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:880 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:880 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:901 -> [UART, PM25] Reading data...
19:51:33:901 -> [UART, PM25] Data not available.
19:51:33:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:901 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:901 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:922 -> [UART, PM25] Reading data...
19:51:33:922 -> [UART, PM25] Data not available.
19:51:33:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:922 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:922 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:943 -> [UART, PM25] Reading data...
19:51:33:943 -> [UART, PM25] Data not available.
19:51:33:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:943 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:943 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:964 -> [UART, PM25] Reading data...
19:51:33:968 -> [UART, PM25] Data not available.
19:51:33:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:968 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:968 -> [UART, PM25] Uart available, resetting event queue..
19:51:33:985 -> [UART, PM25] Reading data...
19:51:33:985 -> [UART, PM25] Data not available.
19:51:33:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:33:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:33:985 -> [UART, PM25] Uart available, clearing write errors..
19:51:33:985 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:006 -> [UART, PM25] Reading data...
19:51:34:006 -> [UART, PM25] Data not available.
19:51:34:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:006 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:006 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:027 -> [UART, PM25] Reading data...
19:51:34:027 -> [UART, PM25] Data not available.
19:51:34:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:027 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:027 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:048 -> [UART, PM25] Reading data...
19:51:34:048 -> [UART, PM25] Data not available.
19:51:34:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:048 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:048 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:069 -> [UART, PM25] Reading data...
19:51:34:069 -> [UART, PM25] Data not available.
19:51:34:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:069 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:069 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:090 -> [UART, PM25] Reading data...
19:51:34:090 -> [UART, PM25] Data not available.
19:51:34:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:090 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:090 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:111 -> [UART, PM25] Reading data...
19:51:34:111 -> [UART, PM25] Data not available.
19:51:34:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:111 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:111 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:132 -> [UART, PM25] Reading data...
19:51:34:132 -> [UART, PM25] Data not available.
19:51:34:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:132 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:132 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:153 -> [UART, PM25] Reading data...
19:51:34:153 -> [UART, PM25] Data not available.
19:51:34:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:153 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:153 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:174 -> [UART, PM25] Reading data...
19:51:34:174 -> [UART, PM25] Data not available.
19:51:34:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:174 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:174 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:195 -> [UART, PM25] Reading data...
19:51:34:195 -> [UART, PM25] Data not available.
19:51:34:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:195 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:195 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:216 -> [UART, PM25] Reading data...
19:51:34:216 -> [UART, PM25] Data not available.
19:51:34:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:216 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:216 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:237 -> [UART, PM25] Reading data...
19:51:34:237 -> [UART, PM25] Data not available.
19:51:34:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:237 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:237 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:258 -> [UART, PM25] Reading data...
19:51:34:258 -> [UART, PM25] Data not available.
19:51:34:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:258 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:258 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:279 -> [UART, PM25] Reading data...
19:51:34:279 -> [UART, PM25] Data not available.
19:51:34:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:279 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:279 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:300 -> [UART, PM25] Reading data...
19:51:34:300 -> [UART, PM25] Data not available.
19:51:34:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:300 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:300 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:321 -> [UART, PM25] Reading data...
19:51:34:321 -> [UART, PM25] Data not available.
19:51:34:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:321 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:321 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:342 -> [UART, PM25] Reading data...
19:51:34:342 -> [UART, PM25] Data not available.
19:51:34:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:342 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:342 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:363 -> [UART, PM25] Reading data...
19:51:34:363 -> [UART, PM25] Data not available.
19:51:34:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:363 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:363 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:384 -> [UART, PM25] Reading data...
19:51:34:384 -> [UART, PM25] Data not available.
19:51:34:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:384 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:384 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:405 -> [UART, PM25] Reading data...
19:51:34:405 -> [UART, PM25] Data not available.
19:51:34:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:405 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:405 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:426 -> [UART, PM25] Reading data...
19:51:34:426 -> [UART, PM25] Data not available.
19:51:34:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:426 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:426 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:447 -> [UART, PM25] Reading data...
19:51:34:447 -> [UART, PM25] Data not available.
19:51:34:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:447 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:447 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:468 -> [UART, PM25] Reading data...
19:51:34:468 -> [UART, PM25] Data not available.
19:51:34:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:468 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:468 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:490 -> [UART, PM25] Reading data...
19:51:34:490 -> [UART, PM25] Data not available.
19:51:34:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:490 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:490 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:511 -> [UART, PM25] Reading data...
19:51:34:511 -> [UART, PM25] Data not available.
19:51:34:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:511 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:511 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:532 -> [UART, PM25] Reading data...
19:51:34:532 -> [UART, PM25] Data not available.
19:51:34:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:532 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:532 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:553 -> [UART, PM25] Reading data...
19:51:34:553 -> [UART, PM25] Data not available.
19:51:34:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:553 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:553 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:574 -> [UART, PM25] Reading data...
19:51:34:574 -> [UART, PM25] Data not available.
19:51:34:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:574 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:574 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:600 -> [UART, PM25] Reading data...
19:51:34:601 -> [UART, PM25] Data not available.
19:51:34:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:616 -> [UART, PM25] Reading data...
19:51:34:616 -> [UART, PM25] Data not available.
19:51:34:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:616 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:616 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:637 -> [UART, PM25] Reading data...
19:51:34:638 -> [UART, PM25] Data not available.
19:51:34:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:638 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:638 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:658 -> [UART, PM25] Reading data...
19:51:34:658 -> [UART, PM25] Data not available.
19:51:34:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:679 -> [UART, PM25] Reading data...
19:51:34:680 -> [UART, PM25] Data not available.
19:51:34:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:680 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:680 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:700 -> [UART, PM25] Reading data...
19:51:34:700 -> [UART, PM25] Data not available.
19:51:34:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:700 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:700 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:721 -> [UART, PM25] Reading data...
19:51:34:721 -> [UART, PM25] Data not available.
19:51:34:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:721 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:721 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:742 -> [UART, PM25] Reading data...
19:51:34:742 -> [UART, PM25] Data not available.
19:51:34:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:742 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:742 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:763 -> [UART, PM25] Reading data...
19:51:34:763 -> [UART, PM25] Data not available.
19:51:34:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:763 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:763 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:784 -> [UART, PM25] Reading data...
19:51:34:784 -> [UART, PM25] Data not available.
19:51:34:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:805 -> [UART, PM25] Reading data...
19:51:34:805 -> [UART, PM25] Data not available.
19:51:34:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:805 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:805 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:826 -> [UART, PM25] Reading data...
19:51:34:826 -> [UART, PM25] Data not available.
19:51:34:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:826 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:826 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:847 -> [UART, PM25] Reading data...
19:51:34:847 -> [UART, PM25] Data not available.
19:51:34:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:847 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:847 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:868 -> [UART, PM25] Reading data...
19:51:34:869 -> [UART, PM25] Data not available.
19:51:34:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:869 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:869 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:922 -> [UART, PM25] Reading data...
19:51:34:923 -> [UART, PM25] Data not available.
19:51:34:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:923 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:923 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:923 -> [UART, PM25] Reading data...
19:51:34:923 -> [UART, PM25] Data not available.
19:51:34:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:923 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:923 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:931 -> [UART, PM25] Reading data...
19:51:34:931 -> [UART, PM25] Data not available.
19:51:34:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:952 -> [UART, PM25] Reading data...
19:51:34:952 -> [UART, PM25] Data not available.
19:51:34:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:952 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:952 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:973 -> [UART, PM25] Reading data...
19:51:34:973 -> [UART, PM25] Data not available.
19:51:34:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:973 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:973 -> [UART, PM25] Uart available, resetting event queue..
19:51:34:994 -> [UART, PM25] Reading data...
19:51:34:994 -> [UART, PM25] Data not available.
19:51:34:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:34:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:34:994 -> [UART, PM25] Uart available, clearing write errors..
19:51:34:994 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:015 -> [UART, PM25] Reading data...
19:51:35:015 -> [UART, PM25] Data not available.
19:51:35:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:036 -> [UART, PM25] Reading data...
19:51:35:036 -> [UART, PM25] Data not available.
19:51:35:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:057 -> [UART, PM25] Reading data...
19:51:35:057 -> [UART, PM25] Data not available.
19:51:35:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:057 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:057 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:078 -> [UART, PM25] Reading data...
19:51:35:078 -> [UART, PM25] Data not available.
19:51:35:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:099 -> [UART, PM25] Reading data...
19:51:35:099 -> [UART, PM25] Data not available.
19:51:35:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:099 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:099 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:127 -> [UART, PM25] Reading data...
19:51:35:128 -> [UART, PM25] Data not available.
19:51:35:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:141 -> [UART, PM25] Reading data...
19:51:35:141 -> [UART, PM25] Data not available.
19:51:35:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:162 -> [UART, PM25] Reading data...
19:51:35:162 -> [UART, PM25] Data not available.
19:51:35:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:183 -> [UART, PM25] Reading data...
19:51:35:183 -> [UART, PM25] Data not available.
19:51:35:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:204 -> [UART, PM25] Reading data...
19:51:35:205 -> [UART, PM25] Data not available.
19:51:35:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:205 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:205 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:225 -> [UART, PM25] Reading data...
19:51:35:225 -> [UART, PM25] Data not available.
19:51:35:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:225 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:225 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:246 -> [UART, PM25] Reading data...
19:51:35:246 -> [UART, PM25] Data not available.
19:51:35:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:246 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:246 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:267 -> [UART, PM25] Reading data...
19:51:35:267 -> [UART, PM25] Data not available.
19:51:35:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:267 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:267 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:288 -> [UART, PM25] Reading data...
19:51:35:288 -> [UART, PM25] Data not available.
19:51:35:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:288 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:288 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:309 -> [UART, PM25] Reading data...
19:51:35:309 -> [UART, PM25] Data not available.
19:51:35:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:309 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:309 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:330 -> [UART, PM25] Reading data...
19:51:35:330 -> [UART, PM25] Data not available.
19:51:35:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:330 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:330 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:351 -> [UART, PM25] Reading data...
19:51:35:351 -> [UART, PM25] Data not available.
19:51:35:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:351 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:351 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:372 -> [UART, PM25] Reading data...
19:51:35:372 -> [UART, PM25] Data not available.
19:51:35:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:372 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:372 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:393 -> [UART, PM25] Reading data...
19:51:35:393 -> [UART, PM25] Data not available.
19:51:35:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:393 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:393 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:414 -> [UART, PM25] Reading data...
19:51:35:415 -> [UART, PM25] Data not available.
19:51:35:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:415 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:415 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:435 -> [UART, PM25] Reading data...
19:51:35:435 -> [UART, PM25] Data not available.
19:51:35:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:435 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:435 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:456 -> [UART, PM25] Reading data...
19:51:35:456 -> [UART, PM25] Data not available.
19:51:35:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:456 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:456 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:477 -> [UART, PM25] Reading data...
19:51:35:477 -> [UART, PM25] Data not available.
19:51:35:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:477 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:477 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:498 -> [UART, PM25] Reading data...
19:51:35:498 -> [UART, PM25] Data not available.
19:51:35:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:498 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:498 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:522 -> [UART, PM25] Reading data...
19:51:35:523 -> [UART, PM25] Data not available.
19:51:35:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:523 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:523 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:540 -> [UART, PM25] Reading data...
19:51:35:540 -> [UART, PM25] Data not available.
19:51:35:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:540 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:540 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:561 -> [UART, PM25] Reading data...
19:51:35:561 -> [UART, PM25] Data not available.
19:51:35:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:561 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:561 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:582 -> [UART, PM25] Reading data...
19:51:35:582 -> [UART, PM25] Data not available.
19:51:35:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:582 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:582 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:603 -> [UART, PM25] Reading data...
19:51:35:603 -> [UART, PM25] Data not available.
19:51:35:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:603 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:603 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:624 -> [UART, PM25] Reading data...
19:51:35:624 -> [UART, PM25] Data not available.
19:51:35:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:624 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:624 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:645 -> [UART, PM25] Reading data...
19:51:35:645 -> [UART, PM25] Data not available.
19:51:35:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:645 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:645 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:666 -> [UART, PM25] Reading data...
19:51:35:666 -> [UART, PM25] Data not available.
19:51:35:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:666 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:666 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:687 -> [UART, PM25] Reading data...
19:51:35:687 -> [UART, PM25] Data not available.
19:51:35:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:687 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:687 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:708 -> [UART, PM25] Reading data...
19:51:35:708 -> [UART, PM25] Data not available.
19:51:35:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:708 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:708 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:729 -> [UART, PM25] Reading data...
19:51:35:729 -> [UART, PM25] Data not available.
19:51:35:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:729 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:729 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:750 -> [UART, PM25] Reading data...
19:51:35:750 -> [UART, PM25] Data not available.
19:51:35:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:750 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:750 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:771 -> [UART, PM25] Reading data...
19:51:35:771 -> [UART, PM25] Data not available.
19:51:35:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:771 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:771 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:792 -> [UART, PM25] Reading data...
19:51:35:792 -> [UART, PM25] Data not available.
19:51:35:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:792 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:792 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:813 -> [UART, PM25] Reading data...
19:51:35:813 -> [UART, PM25] Data not available.
19:51:35:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:813 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:813 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:834 -> [UART, PM25] Reading data...
19:51:35:834 -> [UART, PM25] Data not available.
19:51:35:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:834 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:834 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:855 -> [UART, PM25] Reading data...
19:51:35:855 -> [UART, PM25] Data not available.
19:51:35:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:855 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:855 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:876 -> [UART, PM25] Reading data...
19:51:35:876 -> [UART, PM25] Data not available.
19:51:35:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:876 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:876 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:897 -> [UART, PM25] Reading data...
19:51:35:897 -> [UART, PM25] Data not available.
19:51:35:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:918 -> [UART, PM25] Reading data...
19:51:35:918 -> [UART, PM25] Data not available.
19:51:35:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:939 -> [UART, PM25] Reading data...
19:51:35:939 -> [UART, PM25] Data not available.
19:51:35:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:939 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:939 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:960 -> [UART, PM25] Reading data...
19:51:35:961 -> [UART, PM25] Data not available.
19:51:35:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:961 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:961 -> [UART, PM25] Uart available, resetting event queue..
19:51:35:981 -> [UART, PM25] Reading data...
19:51:35:981 -> [UART, PM25] Data not available.
19:51:35:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:35:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:35:981 -> [UART, PM25] Uart available, clearing write errors..
19:51:35:981 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:002 -> [UART, PM25] Reading data...
19:51:36:002 -> [UART, PM25] Data not available.
19:51:36:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:002 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:002 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:023 -> [UART, PM25] Reading data...
19:51:36:023 -> [UART, PM25] Data not available.
19:51:36:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:023 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:023 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:044 -> [UART, PM25] Reading data...
19:51:36:044 -> [UART, PM25] Data not available.
19:51:36:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:044 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:044 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:065 -> [UART, PM25] Reading data...
19:51:36:065 -> [UART, PM25] Data not available.
19:51:36:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:065 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:065 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:086 -> [UART, PM25] Reading data...
19:51:36:087 -> [UART, PM25] Data not available.
19:51:36:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:087 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:087 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:107 -> [UART, PM25] Reading data...
19:51:36:107 -> [UART, PM25] Data not available.
19:51:36:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:107 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:107 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:128 -> [UART, PM25] Reading data...
19:51:36:128 -> [UART, PM25] Data not available.
19:51:36:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:162 -> [UART, PM25] Reading data...
19:51:36:162 -> [UART, PM25] Data not available.
19:51:36:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:170 -> [UART, PM25] Reading data...
19:51:36:170 -> [UART, PM25] Data not available.
19:51:36:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:191 -> [UART, PM25] Reading data...
19:51:36:191 -> [UART, PM25] Data not available.
19:51:36:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:191 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:191 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:212 -> [UART, PM25] Reading data...
19:51:36:212 -> [UART, PM25] Data not available.
19:51:36:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:212 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:212 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:233 -> [UART, PM25] Reading data...
19:51:36:234 -> [UART, PM25] Data not available.
19:51:36:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:234 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:234 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:254 -> [UART, PM25] Reading data...
19:51:36:254 -> [UART, PM25] Data not available.
19:51:36:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:254 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:254 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:275 -> [UART, PM25] Reading data...
19:51:36:275 -> [UART, PM25] Data not available.
19:51:36:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:296 -> [UART, PM25] Reading data...
19:51:36:296 -> [UART, PM25] Data not available.
19:51:36:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:317 -> [UART, PM25] Reading data...
19:51:36:317 -> [UART, PM25] Data not available.
19:51:36:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:338 -> [UART, PM25] Reading data...
19:51:36:338 -> [UART, PM25] Data not available.
19:51:36:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:359 -> [UART, PM25] Reading data...
19:51:36:359 -> [UART, PM25] Data not available.
19:51:36:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:380 -> [UART, PM25] Reading data...
19:51:36:380 -> [UART, PM25] Data not available.
19:51:36:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:380 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:380 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:401 -> [UART, PM25] Reading data...
19:51:36:401 -> [UART, PM25] Data not available.
19:51:36:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:422 -> [UART, PM25] Reading data...
19:51:36:422 -> [UART, PM25] Data not available.
19:51:36:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:423 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:423 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:443 -> [UART, PM25] Reading data...
19:51:36:443 -> [UART, PM25] Data not available.
19:51:36:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:464 -> [UART, PM25] Reading data...
19:51:36:464 -> [UART, PM25] Data not available.
19:51:36:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:485 -> [UART, PM25] Reading data...
19:51:36:485 -> [UART, PM25] Data not available.
19:51:36:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:485 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:485 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:506 -> [UART, PM25] Reading data...
19:51:36:506 -> [UART, PM25] Data not available.
19:51:36:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:506 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:506 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:551 -> [UART, PM25] Reading data...
19:51:36:563 -> [UART, PM25] Data not available.
19:51:36:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:563 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:563 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:563 -> [UART, PM25] Reading data...
19:51:36:563 -> [UART, PM25] Data not available.
19:51:36:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:563 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:563 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:569 -> [UART, PM25] Reading data...
19:51:36:569 -> [UART, PM25] Data not available.
19:51:36:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:590 -> [UART, PM25] Reading data...
19:51:36:590 -> [UART, PM25] Data not available.
19:51:36:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:611 -> [UART, PM25] Reading data...
19:51:36:612 -> [UART, PM25] Data not available.
19:51:36:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:612 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:612 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:632 -> [UART, PM25] Reading data...
19:51:36:632 -> [UART, PM25] Data not available.
19:51:36:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:632 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:632 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:653 -> [UART, PM25] Reading data...
19:51:36:653 -> [UART, PM25] Data not available.
19:51:36:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:653 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:653 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:680 -> [UART, PM25] Reading data...
19:51:36:681 -> [UART, PM25] Data not available.
19:51:36:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:681 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:681 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:695 -> [UART, PM25] Reading data...
19:51:36:695 -> [UART, PM25] Data not available.
19:51:36:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:695 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:695 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:716 -> [UART, PM25] Reading data...
19:51:36:716 -> [UART, PM25] Data not available.
19:51:36:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:737 -> [UART, PM25] Reading data...
19:51:36:737 -> [UART, PM25] Data not available.
19:51:36:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:737 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:737 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:758 -> [UART, PM25] Reading data...
19:51:36:758 -> [UART, PM25] Data not available.
19:51:36:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:758 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:758 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:779 -> [UART, PM25] Reading data...
19:51:36:779 -> [UART, PM25] Data not available.
19:51:36:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:779 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:779 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:800 -> [UART, PM25] Reading data...
19:51:36:800 -> [UART, PM25] Data not available.
19:51:36:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:800 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:800 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:821 -> [UART, PM25] Reading data...
19:51:36:821 -> [UART, PM25] Data not available.
19:51:36:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:821 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:821 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:842 -> [UART, PM25] Reading data...
19:51:36:842 -> [UART, PM25] Data not available.
19:51:36:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:842 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:842 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:863 -> [UART, PM25] Reading data...
19:51:36:863 -> [UART, PM25] Data not available.
19:51:36:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:863 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:863 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:884 -> [UART, PM25] Reading data...
19:51:36:884 -> [UART, PM25] Data not available.
19:51:36:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:884 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:884 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:905 -> [UART, PM25] Reading data...
19:51:36:905 -> [UART, PM25] Data not available.
19:51:36:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:905 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:905 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:926 -> [UART, PM25] Reading data...
19:51:36:926 -> [UART, PM25] Data not available.
19:51:36:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:926 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:926 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:947 -> [UART, PM25] Reading data...
19:51:36:947 -> [UART, PM25] Data not available.
19:51:36:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:947 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:947 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:968 -> [UART, PM25] Reading data...
19:51:36:968 -> [UART, PM25] Data not available.
19:51:36:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:968 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:968 -> [UART, PM25] Uart available, resetting event queue..
19:51:36:989 -> [UART, PM25] Reading data...
19:51:36:989 -> [UART, PM25] Data not available.
19:51:36:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:36:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:36:989 -> [UART, PM25] Uart available, clearing write errors..
19:51:36:989 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:010 -> [UART, PM25] Reading data...
19:51:37:010 -> [UART, PM25] Data not available.
19:51:37:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:010 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:010 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:031 -> [UART, PM25] Reading data...
19:51:37:031 -> [UART, PM25] Data not available.
19:51:37:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:031 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:031 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:052 -> [UART, PM25] Reading data...
19:51:37:052 -> [UART, PM25] Data not available.
19:51:37:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:052 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:052 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:073 -> [UART, PM25] Reading data...
19:51:37:073 -> [UART, PM25] Data not available.
19:51:37:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:094 -> [UART, PM25] Reading data...
19:51:37:094 -> [UART, PM25] Data not available.
19:51:37:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:094 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:094 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:116 -> [UART, PM25] Reading data...
19:51:37:119 -> [UART, PM25] Data not available.
19:51:37:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:119 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:119 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:136 -> [UART, PM25] Reading data...
19:51:37:136 -> [UART, PM25] Data not available.
19:51:37:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:136 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:136 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:157 -> [UART, PM25] Reading data...
19:51:37:157 -> [UART, PM25] Data not available.
19:51:37:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:157 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:157 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:178 -> [UART, PM25] Reading data...
19:51:37:178 -> [UART, PM25] Data not available.
19:51:37:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:178 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:178 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:205 -> [UART, PM25] Reading data...
19:51:37:206 -> [UART, PM25] Data not available.
19:51:37:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:206 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:206 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:220 -> [UART, PM25] Reading data...
19:51:37:220 -> [UART, PM25] Data not available.
19:51:37:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:241 -> [UART, PM25] Reading data...
19:51:37:242 -> [UART, PM25] Data not available.
19:51:37:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:242 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:242 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:262 -> [UART, PM25] Reading data...
19:51:37:262 -> [UART, PM25] Data not available.
19:51:37:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:283 -> [UART, PM25] Reading data...
19:51:37:283 -> [UART, PM25] Data not available.
19:51:37:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:283 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:283 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:304 -> [UART, PM25] Reading data...
19:51:37:304 -> [UART, PM25] Data not available.
19:51:37:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:304 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:304 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:325 -> [UART, PM25] Reading data...
19:51:37:325 -> [UART, PM25] Data not available.
19:51:37:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:325 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:325 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:346 -> [UART, PM25] Reading data...
19:51:37:347 -> [UART, PM25] Data not available.
19:51:37:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:347 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:347 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:367 -> [UART, PM25] Reading data...
19:51:37:368 -> [UART, PM25] Data not available.
19:51:37:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:368 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:368 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:388 -> [UART, PM25] Reading data...
19:51:37:388 -> [UART, PM25] Data not available.
19:51:37:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:388 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:388 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:409 -> [UART, PM25] Reading data...
19:51:37:409 -> [UART, PM25] Data not available.
19:51:37:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:430 -> [UART, PM25] Reading data...
19:51:37:430 -> [UART, PM25] Data not available.
19:51:37:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:430 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:430 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:451 -> [UART, PM25] Reading data...
19:51:37:451 -> [UART, PM25] Data not available.
19:51:37:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:472 -> [UART, PM25] Reading data...
19:51:37:472 -> [UART, PM25] Data not available.
19:51:37:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:493 -> [UART, PM25] Reading data...
19:51:37:493 -> [UART, PM25] Data not available.
19:51:37:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:514 -> [UART, PM25] Reading data...
19:51:37:514 -> [UART, PM25] Data not available.
19:51:37:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:514 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:514 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:535 -> [UART, PM25] Reading data...
19:51:37:535 -> [UART, PM25] Data not available.
19:51:37:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:535 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:535 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:556 -> [UART, PM25] Reading data...
19:51:37:556 -> [UART, PM25] Data not available.
19:51:37:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:556 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:556 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:577 -> [UART, PM25] Reading data...
19:51:37:577 -> [UART, PM25] Data not available.
19:51:37:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:598 -> [UART, PM25] Reading data...
19:51:37:599 -> [UART, PM25] Data not available.
19:51:37:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:599 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:599 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:619 -> [UART, PM25] Reading data...
19:51:37:619 -> [UART, PM25] Data not available.
19:51:37:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:619 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:619 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:640 -> [UART, PM25] Reading data...
19:51:37:640 -> [UART, PM25] Data not available.
19:51:37:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:661 -> [UART, PM25] Reading data...
19:51:37:661 -> [UART, PM25] Data not available.
19:51:37:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:661 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:661 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:682 -> [UART, PM25] Reading data...
19:51:37:682 -> [UART, PM25] Data not available.
19:51:37:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:703 -> [UART, PM25] Reading data...
19:51:37:703 -> [UART, PM25] Data not available.
19:51:37:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:703 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:703 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:724 -> [UART, PM25] Reading data...
19:51:37:724 -> [UART, PM25] Data not available.
19:51:37:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:745 -> [UART, PM25] Reading data...
19:51:37:745 -> [UART, PM25] Data not available.
19:51:37:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:766 -> [UART, PM25] Reading data...
19:51:37:766 -> [UART, PM25] Data not available.
19:51:37:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:787 -> [UART, PM25] Reading data...
19:51:37:787 -> [UART, PM25] Data not available.
19:51:37:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:787 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:787 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:808 -> [UART, PM25] Reading data...
19:51:37:808 -> [UART, PM25] Data not available.
19:51:37:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:829 -> [UART, PM25] Reading data...
19:51:37:829 -> [UART, PM25] Data not available.
19:51:37:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:850 -> [UART, PM25] Reading data...
19:51:37:850 -> [UART, PM25] Data not available.
19:51:37:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:850 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:850 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:871 -> [UART, PM25] Reading data...
19:51:37:871 -> [UART, PM25] Data not available.
19:51:37:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:871 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:871 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:892 -> [UART, PM25] Reading data...
19:51:37:892 -> [UART, PM25] Data not available.
19:51:37:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:892 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:892 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:913 -> [UART, PM25] Reading data...
19:51:37:913 -> [UART, PM25] Data not available.
19:51:37:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:913 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:913 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:935 -> [UART, PM25] Reading data...
19:51:37:935 -> [UART, PM25] Data not available.
19:51:37:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:935 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:935 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:955 -> [UART, PM25] Reading data...
19:51:37:955 -> [UART, PM25] Data not available.
19:51:37:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:955 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:955 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:976 -> [UART, PM25] Reading data...
19:51:37:976 -> [UART, PM25] Data not available.
19:51:37:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:37:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:37:976 -> [UART, PM25] Uart available, clearing write errors..
19:51:37:976 -> [UART, PM25] Uart available, resetting event queue..
19:51:37:976 -> PING!
19:51:38:190 -> [UART, PM25] Reading data...
19:51:38:190 -> [UART, PM25] Data not available.
19:51:38:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:190 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:190 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:211 -> [UART, PM25] Reading data...
19:51:38:211 -> [UART, PM25] Data not available.
19:51:38:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:211 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:211 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:242 -> [UART, PM25] Reading data...
19:51:38:243 -> [UART, PM25] Data not available.
19:51:38:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:243 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:243 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:253 -> [UART, PM25] Reading data...
19:51:38:253 -> [UART, PM25] Data not available.
19:51:38:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:253 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:253 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:274 -> [UART, PM25] Reading data...
19:51:38:274 -> [UART, PM25] Data not available.
19:51:38:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:295 -> [UART, PM25] Reading data...
19:51:38:295 -> [UART, PM25] Data not available.
19:51:38:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:295 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:295 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:316 -> [UART, PM25] Reading data...
19:51:38:316 -> [UART, PM25] Data not available.
19:51:38:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:316 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:316 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:337 -> [UART, PM25] Reading data...
19:51:38:337 -> [UART, PM25] Data not available.
19:51:38:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:337 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:337 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:358 -> [UART, PM25] Reading data...
19:51:38:358 -> [UART, PM25] Data not available.
19:51:38:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:358 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:358 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:406 -> [UART, PM25] Reading data...
19:51:38:415 -> [UART, PM25] Data not available.
19:51:38:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:415 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:415 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:415 -> [UART, PM25] Reading data...
19:51:38:415 -> [UART, PM25] Data not available.
19:51:38:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:415 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:415 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:421 -> [UART, PM25] Reading data...
19:51:38:421 -> [UART, PM25] Data not available.
19:51:38:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:421 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:421 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:442 -> [UART, PM25] Reading data...
19:51:38:442 -> [UART, PM25] Data not available.
19:51:38:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:442 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:442 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:463 -> [UART, PM25] Reading data...
19:51:38:463 -> [UART, PM25] Data not available.
19:51:38:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:463 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:463 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:484 -> [UART, PM25] Reading data...
19:51:38:484 -> [UART, PM25] Data not available.
19:51:38:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:484 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:484 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:505 -> [UART, PM25] Reading data...
19:51:38:505 -> [UART, PM25] Data not available.
19:51:38:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:505 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:505 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:526 -> [UART, PM25] Reading data...
19:51:38:526 -> [UART, PM25] Data not available.
19:51:38:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:526 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:526 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:547 -> [UART, PM25] Reading data...
19:51:38:547 -> [UART, PM25] Data not available.
19:51:38:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:547 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:547 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:568 -> [UART, PM25] Reading data...
19:51:38:568 -> [UART, PM25] Data not available.
19:51:38:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:568 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:568 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:589 -> [UART, PM25] Reading data...
19:51:38:589 -> [UART, PM25] Data not available.
19:51:38:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:589 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:589 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:610 -> [UART, PM25] Reading data...
19:51:38:610 -> [UART, PM25] Data not available.
19:51:38:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:610 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:610 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:630 -> [UART, PM25] Reading data...
19:51:38:631 -> [UART, PM25] Data not available.
19:51:38:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:631 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:631 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:652 -> [UART, PM25] Reading data...
19:51:38:652 -> [UART, PM25] Data not available.
19:51:38:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:652 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:652 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:673 -> [UART, PM25] Reading data...
19:51:38:673 -> [UART, PM25] Data not available.
19:51:38:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:673 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:673 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:694 -> [UART, PM25] Reading data...
19:51:38:694 -> [UART, PM25] Data not available.
19:51:38:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:694 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:694 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:715 -> [UART, PM25] Reading data...
19:51:38:715 -> [UART, PM25] Data not available.
19:51:38:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:715 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:715 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:736 -> [UART, PM25] Reading data...
19:51:38:736 -> [UART, PM25] Data not available.
19:51:38:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:736 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:736 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:768 -> [UART, PM25] Reading data...
19:51:38:769 -> [UART, PM25] Data not available.
19:51:38:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:769 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:769 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:778 -> [UART, PM25] Reading data...
19:51:38:778 -> [UART, PM25] Data not available.
19:51:38:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:778 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:778 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:799 -> [UART, PM25] Reading data...
19:51:38:799 -> [UART, PM25] Data not available.
19:51:38:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:799 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:799 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:820 -> [UART, PM25] Reading data...
19:51:38:820 -> [UART, PM25] Data not available.
19:51:38:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:820 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:820 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:841 -> [UART, PM25] Reading data...
19:51:38:841 -> [UART, PM25] Data not available.
19:51:38:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:841 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:841 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:862 -> [UART, PM25] Reading data...
19:51:38:862 -> [UART, PM25] Data not available.
19:51:38:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:862 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:862 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:883 -> [UART, PM25] Reading data...
19:51:38:884 -> [UART, PM25] Data not available.
19:51:38:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:884 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:884 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:905 -> [UART, PM25] Reading data...
19:51:38:905 -> [UART, PM25] Data not available.
19:51:38:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:905 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:905 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:926 -> [UART, PM25] Reading data...
19:51:38:926 -> [UART, PM25] Data not available.
19:51:38:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:926 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:926 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:947 -> [UART, PM25] Reading data...
19:51:38:947 -> [UART, PM25] Data not available.
19:51:38:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:947 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:947 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:968 -> [UART, PM25] Reading data...
19:51:38:969 -> [UART, PM25] Data not available.
19:51:38:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:969 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:969 -> [UART, PM25] Uart available, resetting event queue..
19:51:38:989 -> [UART, PM25] Reading data...
19:51:38:990 -> [UART, PM25] Data not available.
19:51:38:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:38:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:38:990 -> [UART, PM25] Uart available, clearing write errors..
19:51:38:990 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:010 -> [UART, PM25] Reading data...
19:51:39:010 -> [UART, PM25] Data not available.
19:51:39:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:010 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:010 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:031 -> [UART, PM25] Reading data...
19:51:39:031 -> [UART, PM25] Data not available.
19:51:39:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:031 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:031 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:052 -> [UART, PM25] Reading data...
19:51:39:052 -> [UART, PM25] Data not available.
19:51:39:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:052 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:052 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:073 -> [UART, PM25] Reading data...
19:51:39:073 -> [UART, PM25] Data not available.
19:51:39:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:094 -> [UART, PM25] Reading data...
19:51:39:094 -> [UART, PM25] Data not available.
19:51:39:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:094 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:094 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:115 -> [UART, PM25] Reading data...
19:51:39:115 -> [UART, PM25] Data not available.
19:51:39:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:115 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:115 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:136 -> [UART, PM25] Reading data...
19:51:39:136 -> [UART, PM25] Data not available.
19:51:39:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:136 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:136 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:157 -> [UART, PM25] Reading data...
19:51:39:157 -> [UART, PM25] Data not available.
19:51:39:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:157 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:157 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:178 -> [UART, PM25] Reading data...
19:51:39:179 -> [UART, PM25] Data not available.
19:51:39:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:179 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:179 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:199 -> [UART, PM25] Reading data...
19:51:39:199 -> [UART, PM25] Data not available.
19:51:39:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:199 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:199 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:220 -> [UART, PM25] Reading data...
19:51:39:220 -> [UART, PM25] Data not available.
19:51:39:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:241 -> [UART, PM25] Reading data...
19:51:39:241 -> [UART, PM25] Data not available.
19:51:39:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:241 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:241 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:262 -> [UART, PM25] Reading data...
19:51:39:262 -> [UART, PM25] Data not available.
19:51:39:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:287 -> [UART, PM25] Reading data...
19:51:39:288 -> [UART, PM25] Data not available.
19:51:39:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:288 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:288 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:304 -> [UART, PM25] Reading data...
19:51:39:304 -> [UART, PM25] Data not available.
19:51:39:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:304 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:304 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:325 -> [UART, PM25] Reading data...
19:51:39:325 -> [UART, PM25] Data not available.
19:51:39:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:325 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:325 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:346 -> [UART, PM25] Reading data...
19:51:39:346 -> [UART, PM25] Data not available.
19:51:39:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:346 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:346 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:367 -> [UART, PM25] Reading data...
19:51:39:367 -> [UART, PM25] Data not available.
19:51:39:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:367 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:367 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:388 -> [UART, PM25] Reading data...
19:51:39:388 -> [UART, PM25] Data not available.
19:51:39:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:388 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:388 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:409 -> [UART, PM25] Reading data...
19:51:39:409 -> [UART, PM25] Data not available.
19:51:39:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:431 -> [UART, PM25] Reading data...
19:51:39:432 -> [UART, PM25] Data not available.
19:51:39:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:432 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:432 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:451 -> [UART, PM25] Reading data...
19:51:39:451 -> [UART, PM25] Data not available.
19:51:39:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:472 -> [UART, PM25] Reading data...
19:51:39:472 -> [UART, PM25] Data not available.
19:51:39:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:493 -> [UART, PM25] Reading data...
19:51:39:493 -> [UART, PM25] Data not available.
19:51:39:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:514 -> [UART, PM25] Reading data...
19:51:39:514 -> [UART, PM25] Data not available.
19:51:39:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:514 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:514 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:535 -> [UART, PM25] Reading data...
19:51:39:535 -> [UART, PM25] Data not available.
19:51:39:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:535 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:535 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:556 -> [UART, PM25] Reading data...
19:51:39:556 -> [UART, PM25] Data not available.
19:51:39:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:556 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:556 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:577 -> [UART, PM25] Reading data...
19:51:39:577 -> [UART, PM25] Data not available.
19:51:39:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:598 -> [UART, PM25] Reading data...
19:51:39:598 -> [UART, PM25] Data not available.
19:51:39:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:619 -> [UART, PM25] Reading data...
19:51:39:619 -> [UART, PM25] Data not available.
19:51:39:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:619 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:619 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:640 -> [UART, PM25] Reading data...
19:51:39:640 -> [UART, PM25] Data not available.
19:51:39:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:661 -> [UART, PM25] Reading data...
19:51:39:661 -> [UART, PM25] Data not available.
19:51:39:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:661 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:661 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:682 -> [UART, PM25] Reading data...
19:51:39:682 -> [UART, PM25] Data not available.
19:51:39:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:703 -> [UART, PM25] Reading data...
19:51:39:703 -> [UART, PM25] Data not available.
19:51:39:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:703 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:703 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:724 -> [UART, PM25] Reading data...
19:51:39:724 -> [UART, PM25] Data not available.
19:51:39:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:745 -> [UART, PM25] Reading data...
19:51:39:745 -> [UART, PM25] Data not available.
19:51:39:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:745 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:745 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:766 -> [UART, PM25] Reading data...
19:51:39:766 -> [UART, PM25] Data not available.
19:51:39:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:787 -> [UART, PM25] Reading data...
19:51:39:799 -> [UART, PM25] Data not available.
19:51:39:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:799 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:799 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:808 -> [UART, PM25] Reading data...
19:51:39:809 -> [UART, PM25] Data not available.
19:51:39:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:809 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:809 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:829 -> [UART, PM25] Reading data...
19:51:39:829 -> [UART, PM25] Data not available.
19:51:39:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:850 -> [UART, PM25] Reading data...
19:51:39:854 -> [UART, PM25] Data not available.
19:51:39:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:854 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:854 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:871 -> [UART, PM25] Reading data...
19:51:39:871 -> [UART, PM25] Data not available.
19:51:39:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:39:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:39:871 -> [UART, PM25] Uart available, clearing write errors..
19:51:39:871 -> [UART, PM25] Uart available, resetting event queue..
19:51:39:871 -> STATUS LED BLINK KAT
19:51:40:888 -> [UART, PM25] Reading data...
19:51:40:888 -> [UART, PM25] Data not available.
19:51:40:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:888 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:888 -> [UART, PM25] Uart available, resetting event queue..
19:51:40:909 -> [UART, PM25] Reading data...
19:51:40:909 -> [UART, PM25] Data not available.19:51:40:930 -> [UART, PM25] Reading data...
19:51:40:930 -> [UART, PM25] Data not available.
19:51:40:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:930 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:930 -> [UART, PM25] Uart available, resetting event queue..

19:51:40:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:909 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:909 -> [UART, PM25] Uart available, resetting event queue..
19:51:40:953 -> [UART, PM25] Reading data...
19:51:40:955 -> [UART, PM25] Data not available.
19:51:40:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:955 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:955 -> [UART, PM25] Uart available, resetting event queue..
19:51:40:972 -> [UART, PM25] Reading data...
19:51:40:972 -> [UART, PM25] Data not available.
19:51:40:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:972 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:972 -> [UART, PM25] Uart available, resetting event queue..
19:51:40:993 -> [UART, PM25] Reading data...
19:51:40:993 -> [UART, PM25] Data not available.
19:51:40:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:40:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:40:993 -> [UART, PM25] Uart available, clearing write errors..
19:51:40:993 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:014 -> [UART, PM25] Reading data...
19:51:41:014 -> [UART, PM25] Data not available.
19:51:41:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:014 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:014 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:035 -> [UART, PM25] Reading data...
19:51:41:036 -> [UART, PM25] Data not available.
19:51:41:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:055 -> [UART, PM25] Reading data...
19:51:41:056 -> [UART, PM25] Data not available.
19:51:41:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:056 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:056 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:091 -> [UART, PM25] Reading data...
19:51:41:106 -> [UART, PM25] Data not available.
19:51:41:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:106 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:106 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:106 -> [UART, PM25] Reading data...
19:51:41:106 -> [UART, PM25] Data not available.
19:51:41:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:106 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:106 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:119 -> [UART, PM25] Reading data...
19:51:41:119 -> [UART, PM25] Data not available.
19:51:41:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:119 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:119 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:140 -> [UART, PM25] Reading data...
19:51:41:140 -> [UART, PM25] Data not available.
19:51:41:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:140 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:140 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:161 -> [UART, PM25] Reading data...
19:51:41:161 -> [UART, PM25] Data not available.
19:51:41:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:161 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:161 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:181 -> [UART, PM25] Reading data...
19:51:41:182 -> [UART, PM25] Data not available.
19:51:41:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:182 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:182 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:203 -> [UART, PM25] Reading data...
19:51:41:203 -> [UART, PM25] Data not available.
19:51:41:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:203 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:203 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:224 -> [UART, PM25] Reading data...
19:51:41:224 -> [UART, PM25] Data not available.
19:51:41:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:224 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:224 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:245 -> [UART, PM25] Reading data...
19:51:41:246 -> [UART, PM25] Data not available.
19:51:41:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:246 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:246 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:266 -> [UART, PM25] Reading data...
19:51:41:266 -> [UART, PM25] Data not available.
19:51:41:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:266 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:266 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:287 -> [UART, PM25] Reading data...
19:51:41:287 -> [UART, PM25] Data not available.
19:51:41:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:287 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:287 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:308 -> [UART, PM25] Reading data...
19:51:41:308 -> [UART, PM25] Data not available.
19:51:41:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:308 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:308 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:338 -> [UART, PM25] Reading data...
19:51:41:338 -> [UART, PM25] Data not available.
19:51:41:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:350 -> [UART, PM25] Reading data...
19:51:41:350 -> [UART, PM25] Data not available.
19:51:41:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:350 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:350 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:371 -> [UART, PM25] Reading data...
19:51:41:371 -> [UART, PM25] Data not available.
19:51:41:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:371 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:371 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:392 -> [UART, PM25] Reading data...
19:51:41:392 -> [UART, PM25] Data not available.
19:51:41:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:392 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:392 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:413 -> [UART, PM25] Reading data...
19:51:41:414 -> [UART, PM25] Data not available.
19:51:41:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:414 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:414 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:434 -> [UART, PM25] Reading data...
19:51:41:434 -> [UART, PM25] Data not available.
19:51:41:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:434 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:434 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:455 -> [UART, PM25] Reading data...
19:51:41:455 -> [UART, PM25] Data not available.
19:51:41:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:455 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:455 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:476 -> [UART, PM25] Reading data...
19:51:41:476 -> [UART, PM25] Data not available.
19:51:41:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:476 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:476 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:497 -> [UART, PM25] Reading data...
19:51:41:497 -> [UART, PM25] Data not available.
19:51:41:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:497 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:497 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:518 -> [UART, PM25] Reading data...
19:51:41:519 -> [UART, PM25] Data not available.
19:51:41:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:519 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:519 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:539 -> [UART, PM25] Reading data...
19:51:41:539 -> [UART, PM25] Data not available.
19:51:41:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:539 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:539 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:560 -> [UART, PM25] Reading data...
19:51:41:560 -> [UART, PM25] Data not available.
19:51:41:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:560 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:560 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:581 -> [UART, PM25] Reading data...
19:51:41:582 -> [UART, PM25] Data not available.
19:51:41:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:582 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:582 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:602 -> [UART, PM25] Reading data...
19:51:41:602 -> [UART, PM25] Data not available.
19:51:41:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:602 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:602 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:623 -> [UART, PM25] Reading data...
19:51:41:623 -> [UART, PM25] Data not available.
19:51:41:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:623 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:623 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:644 -> [UART, PM25] Reading data...
19:51:41:644 -> [UART, PM25] Data not available.
19:51:41:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:644 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:644 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:665 -> [UART, PM25] Reading data...
19:51:41:666 -> [UART, PM25] Data not available.
19:51:41:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:666 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:666 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:686 -> [UART, PM25] Reading data...
19:51:41:686 -> [UART, PM25] Data not available.
19:51:41:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:686 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:686 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:707 -> [UART, PM25] Reading data...
19:51:41:707 -> [UART, PM25] Data not available.
19:51:41:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:707 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:707 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:728 -> [UART, PM25] Reading data...
19:51:41:728 -> [UART, PM25] Data not available.
19:51:41:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:728 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:728 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:749 -> [UART, PM25] Reading data...
19:51:41:749 -> [UART, PM25] Data not available.
19:51:41:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:749 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:749 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:770 -> [UART, PM25] Reading data...
19:51:41:770 -> [UART, PM25] Data not available.
19:51:41:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:770 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:770 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:791 -> [UART, PM25] Reading data...
19:51:41:791 -> [UART, PM25] Data not available.
19:51:41:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:791 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:791 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:812 -> [UART, PM25] Reading data...
19:51:41:812 -> [UART, PM25] Data not available.
19:51:41:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:812 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:812 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:833 -> [UART, PM25] Reading data...
19:51:41:833 -> [UART, PM25] Data not available.
19:51:41:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:833 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:833 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:868 -> [UART, PM25] Reading data...
19:51:41:869 -> [UART, PM25] Data not available.
19:51:41:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:869 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:869 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:875 -> [UART, PM25] Reading data...
19:51:41:878 -> [UART, PM25] Data not available.
19:51:41:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:878 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:878 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:896 -> [UART, PM25] Reading data...
19:51:41:896 -> [UART, PM25] Data not available.
19:51:41:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:896 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:896 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:917 -> [UART, PM25] Reading data...
19:51:41:917 -> [UART, PM25] Data not available.
19:51:41:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:917 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:917 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:938 -> [UART, PM25] Reading data...
19:51:41:938 -> [UART, PM25] Data not available.
19:51:41:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:938 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:938 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:959 -> [UART, PM25] Reading data...
19:51:41:959 -> [UART, PM25] Data not available.
19:51:41:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:959 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:959 -> [UART, PM25] Uart available, resetting event queue..
19:51:41:980 -> [UART, PM25] Reading data...
19:51:41:980 -> [UART, PM25] Data not available.
19:51:41:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:41:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:41:980 -> [UART, PM25] Uart available, clearing write errors..
19:51:41:980 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:001 -> [UART, PM25] Reading data...
19:51:42:002 -> [UART, PM25] Data not available.
19:51:42:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:002 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:002 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:022 -> [UART, PM25] Reading data...
19:51:42:023 -> [UART, PM25] Data not available.
19:51:42:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:023 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:023 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:043 -> [UART, PM25] Reading data...
19:51:42:043 -> [UART, PM25] Data not available.
19:51:42:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:043 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:043 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:064 -> [UART, PM25] Reading data...
19:51:42:064 -> [UART, PM25] Data not available.
19:51:42:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:064 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:064 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:085 -> [UART, PM25] Reading data...
19:51:42:085 -> [UART, PM25] Data not available.
19:51:42:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:085 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:085 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:106 -> [UART, PM25] Reading data...
19:51:42:107 -> [UART, PM25] Data not available.
19:51:42:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:107 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:107 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:127 -> [UART, PM25] Reading data...
19:51:42:127 -> [UART, PM25] Data not available.
19:51:42:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:127 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:127 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:148 -> [UART, PM25] Reading data...
19:51:42:148 -> [UART, PM25] Data not available.
19:51:42:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:148 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:148 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:169 -> [UART, PM25] Reading data...
19:51:42:170 -> [UART, PM25] Data not available.
19:51:42:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:190 -> [UART, PM25] Reading data...
19:51:42:190 -> [UART, PM25] Data not available.
19:51:42:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:190 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:190 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:211 -> [UART, PM25] Reading data...
19:51:42:211 -> [UART, PM25] Data not available.
19:51:42:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:211 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:211 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:232 -> [UART, PM25] Reading data...
19:51:42:232 -> [UART, PM25] Data not available.
19:51:42:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:232 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:232 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:253 -> [UART, PM25] Reading data...
19:51:42:253 -> [UART, PM25] Data not available.
19:51:42:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:253 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:253 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:274 -> [UART, PM25] Reading data...
19:51:42:274 -> [UART, PM25] Data not available.
19:51:42:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:274 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:274 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:295 -> [UART, PM25] Reading data...
19:51:42:295 -> [UART, PM25] Data not available.
19:51:42:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:295 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:295 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:316 -> [UART, PM25] Reading data...
19:51:42:316 -> [UART, PM25] Data not available.
19:51:42:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:316 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:316 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:337 -> [UART, PM25] Reading data...
19:51:42:337 -> [UART, PM25] Data not available.
19:51:42:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:337 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:337 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:358 -> [UART, PM25] Reading data...
19:51:42:358 -> [UART, PM25] Data not available.
19:51:42:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:358 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:358 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:379 -> [UART, PM25] Reading data...
19:51:42:379 -> [UART, PM25] Data not available.
19:51:42:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:379 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:379 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:400 -> [UART, PM25] Reading data...
19:51:42:400 -> [UART, PM25] Data not available.
19:51:42:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:400 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:400 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:421 -> [UART, PM25] Reading data...
19:51:42:421 -> [UART, PM25] Data not available.
19:51:42:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:421 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:421 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:442 -> [UART, PM25] Reading data...
19:51:42:442 -> [UART, PM25] Data not available.
19:51:42:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:442 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:442 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:463 -> [UART, PM25] Reading data...
19:51:42:463 -> [UART, PM25] Data not available.
19:51:42:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:463 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:463 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:484 -> [UART, PM25] Reading data...
19:51:42:484 -> [UART, PM25] Data not available.
19:51:42:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:484 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:484 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:505 -> [UART, PM25] Reading data...
19:51:42:505 -> [UART, PM25] Data not available.
19:51:42:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:505 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:505 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:526 -> [UART, PM25] Reading data...
19:51:42:526 -> [UART, PM25] Data not available.
19:51:42:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:526 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:526 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:547 -> [UART, PM25] Reading data...
19:51:42:547 -> [UART, PM25] Data not available.
19:51:42:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:547 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:547 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:568 -> [UART, PM25] Reading data...
19:51:42:568 -> [UART, PM25] Data not available.
19:51:42:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:568 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:568 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:589 -> [UART, PM25] Reading data...
19:51:42:589 -> [UART, PM25] Data not available.
19:51:42:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:589 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:589 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:610 -> [UART, PM25] Reading data...
19:51:42:610 -> [UART, PM25] Data not available.
19:51:42:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:610 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:610 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:631 -> [UART, PM25] Reading data...
19:51:42:631 -> [UART, PM25] Data not available.
19:51:42:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:631 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:631 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:652 -> [UART, PM25] Reading data...
19:51:42:652 -> [UART, PM25] Data not available.
19:51:42:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:652 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:652 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:673 -> [UART, PM25] Reading data...
19:51:42:673 -> [UART, PM25] Data not available.
19:51:42:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:673 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:673 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:673 -> PING!
19:51:42:907 -> [UART, PM25] Reading data...
19:51:42:907 -> [UART, PM25] Data not available.
19:51:42:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:907 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:907 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:928 -> [UART, PM25] Reading data...
19:51:42:928 -> [UART, PM25] Data not available.
19:51:42:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:928 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:928 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:949 -> [UART, PM25] Reading data...
19:51:42:949 -> [UART, PM25] Data not available.
19:51:42:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:949 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:949 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:970 -> [UART, PM25] Reading data...
19:51:42:970 -> [UART, PM25] Data not available.
19:51:42:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:970 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:970 -> [UART, PM25] Uart available, resetting event queue..
19:51:42:991 -> [UART, PM25] Reading data...
19:51:42:991 -> [UART, PM25] Data not available.
19:51:42:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:42:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:42:991 -> [UART, PM25] Uart available, clearing write errors..
19:51:42:991 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:012 -> [UART, PM25] Reading data...
19:51:43:012 -> [UART, PM25] Data not available.
19:51:43:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:012 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:012 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:033 -> [UART, PM25] Reading data...
19:51:43:033 -> [UART, PM25] Data not available.
19:51:43:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:033 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:033 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:054 -> [UART, PM25] Reading data...
19:51:43:054 -> [UART, PM25] Data not available.
19:51:43:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:054 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:054 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:075 -> [UART, PM25] Reading data...
19:51:43:075 -> [UART, PM25] Data not available.
19:51:43:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:075 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:075 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:096 -> [UART, PM25] Reading data...
19:51:43:096 -> [UART, PM25] Data not available.
19:51:43:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:096 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:096 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:117 -> [UART, PM25] Reading data...
19:51:43:117 -> [UART, PM25] Data not available.
19:51:43:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:117 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:117 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:138 -> [UART, PM25] Reading data...
19:51:43:138 -> [UART, PM25] Data not available.
19:51:43:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:138 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:138 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:159 -> [UART, PM25] Reading data...
19:51:43:159 -> [UART, PM25] Data not available.
19:51:43:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:159 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:159 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:180 -> [UART, PM25] Reading data...
19:51:43:180 -> [UART, PM25] Data not available.
19:51:43:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:180 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:180 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:201 -> [UART, PM25] Reading data...
19:51:43:201 -> [UART, PM25] Data not available.
19:51:43:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:201 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:201 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:222 -> [UART, PM25] Reading data...
19:51:43:222 -> [UART, PM25] Data not available.
19:51:43:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:222 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:222 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:243 -> [UART, PM25] Reading data...
19:51:43:243 -> [UART, PM25] Data not available.
19:51:43:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:243 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:243 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:264 -> [UART, PM25] Reading data...
19:51:43:264 -> [UART, PM25] Data not available.
19:51:43:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:264 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:264 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:285 -> [UART, PM25] Reading data...
19:51:43:285 -> [UART, PM25] Data not available.
19:51:43:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:285 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:285 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:306 -> [UART, PM25] Reading data...
19:51:43:306 -> [UART, PM25] Data not available.
19:51:43:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:306 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:306 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:327 -> [UART, PM25] Reading data...
19:51:43:327 -> [UART, PM25] Data not available.
19:51:43:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:327 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:327 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:348 -> [UART, PM25] Reading data...
19:51:43:348 -> [UART, PM25] Data not available.
19:51:43:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:348 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:348 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:369 -> [UART, PM25] Reading data...
19:51:43:369 -> [UART, PM25] Data not available.
19:51:43:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:369 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:369 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:390 -> [UART, PM25] Reading data...
19:51:43:390 -> [UART, PM25] Data not available.
19:51:43:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:390 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:390 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:418 -> [UART, PM25] Reading data...
19:51:43:419 -> [UART, PM25] Data not available.
19:51:43:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:419 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:419 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:432 -> [UART, PM25] Reading data...
19:51:43:432 -> [UART, PM25] Data not available.
19:51:43:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:432 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:432 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:453 -> [UART, PM25] Reading data...
19:51:43:453 -> [UART, PM25] Data not available.
19:51:43:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:454 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:454 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:474 -> [UART, PM25] Reading data...
19:51:43:474 -> [UART, PM25] Data not available.
19:51:43:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:474 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:474 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:495 -> [UART, PM25] Reading data...
19:51:43:496 -> [UART, PM25] Data not available.
19:51:43:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:496 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:496 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:516 -> [UART, PM25] Reading data...
19:51:43:516 -> [UART, PM25] Data not available.
19:51:43:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:537 -> [UART, PM25] Reading data...
19:51:43:537 -> [UART, PM25] Data not available.
19:51:43:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:537 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:537 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:558 -> [UART, PM25] Reading data...
19:51:43:558 -> [UART, PM25] Data not available.
19:51:43:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:558 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:558 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:579 -> [UART, PM25] Reading data...
19:51:43:579 -> [UART, PM25] Data not available.
19:51:43:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:579 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:579 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:600 -> [UART, PM25] Reading data...
19:51:43:600 -> [UART, PM25] Data not available.
19:51:43:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:600 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:600 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:621 -> [UART, PM25] Reading data...
19:51:43:621 -> [UART, PM25] Data not available.
19:51:43:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:621 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:621 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:642 -> [UART, PM25] Reading data...
19:51:43:642 -> [UART, PM25] Data not available.
19:51:43:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:642 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:642 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:663 -> [UART, PM25] Reading data...
19:51:43:663 -> [UART, PM25] Data not available.
19:51:43:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:663 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:663 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:684 -> [UART, PM25] Reading data...
19:51:43:684 -> [UART, PM25] Data not available.
19:51:43:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:684 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:684 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:705 -> [UART, PM25] Reading data...
19:51:43:705 -> [UART, PM25] Data not available.
19:51:43:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:705 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:705 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:726 -> [UART, PM25] Reading data...
19:51:43:726 -> [UART, PM25] Data not available.
19:51:43:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:726 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:726 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:747 -> [UART, PM25] Reading data...
19:51:43:747 -> [UART, PM25] Data not available.
19:51:43:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:747 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:747 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:768 -> [UART, PM25] Reading data...
19:51:43:768 -> [UART, PM25] Data not available.
19:51:43:768 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:768 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:768 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:768 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:789 -> [UART, PM25] Reading data...
19:51:43:789 -> [UART, PM25] Data not available.
19:51:43:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:789 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:789 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:810 -> [UART, PM25] Reading data...
19:51:43:810 -> [UART, PM25] Data not available.
19:51:43:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:810 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:810 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:831 -> [UART, PM25] Reading data...
19:51:43:831 -> [UART, PM25] Data not available.
19:51:43:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:831 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:831 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:852 -> [UART, PM25] Reading data...
19:51:43:852 -> [UART, PM25] Data not available.
19:51:43:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:852 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:852 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:873 -> [UART, PM25] Reading data...
19:51:43:873 -> [UART, PM25] Data not available.
19:51:43:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:873 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:873 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:894 -> [UART, PM25] Reading data...
19:51:43:894 -> [UART, PM25] Data not available.
19:51:43:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:894 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:894 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:915 -> [UART, PM25] Reading data...
19:51:43:915 -> [UART, PM25] Data not available.
19:51:43:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:915 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:915 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:939 -> [UART, PM25] Reading data...
19:51:43:939 -> [UART, PM25] Data not available.
19:51:43:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:939 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:939 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:957 -> [UART, PM25] Reading data...
19:51:43:957 -> [UART, PM25] Data not available.
19:51:43:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:957 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:957 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:978 -> [UART, PM25] Reading data...
19:51:43:978 -> [UART, PM25] Data not available.
19:51:43:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:978 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:978 -> [UART, PM25] Uart available, resetting event queue..
19:51:43:999 -> [UART, PM25] Reading data...
19:51:43:999 -> [UART, PM25] Data not available.
19:51:43:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:43:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:43:999 -> [UART, PM25] Uart available, clearing write errors..
19:51:43:999 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:020 -> [UART, PM25] Reading data...
19:51:44:020 -> [UART, PM25] Data not available.
19:51:44:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:020 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:020 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:041 -> [UART, PM25] Reading data...
19:51:44:041 -> [UART, PM25] Data not available.
19:51:44:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:041 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:041 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:062 -> [UART, PM25] Reading data...
19:51:44:062 -> [UART, PM25] Data not available.
19:51:44:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:062 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:062 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:083 -> [UART, PM25] Reading data...
19:51:44:083 -> [UART, PM25] Data not available.
19:51:44:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:083 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:083 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:104 -> [UART, PM25] Reading data...
19:51:44:104 -> [UART, PM25] Data not available.
19:51:44:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:104 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:104 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:125 -> [UART, PM25] Reading data...
19:51:44:125 -> [UART, PM25] Data not available.
19:51:44:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:125 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:125 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:146 -> [UART, PM25] Reading data...
19:51:44:146 -> [UART, PM25] Data not available.
19:51:44:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:146 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:146 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:167 -> [UART, PM25] Reading data...
19:51:44:167 -> [UART, PM25] Data not available.
19:51:44:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:167 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:167 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:188 -> [UART, PM25] Reading data...
19:51:44:188 -> [UART, PM25] Data not available.
19:51:44:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:189 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:189 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:210 -> [UART, PM25] Reading data...
19:51:44:210 -> [UART, PM25] Data not available.
19:51:44:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:210 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:210 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:231 -> [UART, PM25] Reading data...
19:51:44:231 -> [UART, PM25] Data not available.
19:51:44:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:231 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:231 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:252 -> [UART, PM25] Reading data...
19:51:44:252 -> [UART, PM25] Data not available.
19:51:44:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:252 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:252 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:272 -> [UART, PM25] Reading data...
19:51:44:273 -> [UART, PM25] Data not available.
19:51:44:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:273 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:273 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:294 -> [UART, PM25] Reading data...
19:51:44:294 -> [UART, PM25] Data not available.
19:51:44:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:294 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:294 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:315 -> [UART, PM25] Reading data...
19:51:44:315 -> [UART, PM25] Data not available.
19:51:44:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:315 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:315 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:336 -> [UART, PM25] Reading data...
19:51:44:336 -> [UART, PM25] Data not available.
19:51:44:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:336 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:336 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:357 -> [UART, PM25] Reading data...
19:51:44:357 -> [UART, PM25] Data not available.
19:51:44:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:357 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:357 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:378 -> [UART, PM25] Reading data...
19:51:44:379 -> [UART, PM25] Data not available.
19:51:44:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:379 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:379 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:399 -> [UART, PM25] Reading data...
19:51:44:399 -> [UART, PM25] Data not available.
19:51:44:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:399 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:399 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:420 -> [UART, PM25] Reading data...
19:51:44:420 -> [UART, PM25] Data not available.
19:51:44:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:420 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:420 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:450 -> [UART, PM25] Reading data...
19:51:44:451 -> [UART, PM25] Data not available.
19:51:44:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:462 -> [UART, PM25] Reading data...
19:51:44:462 -> [UART, PM25] Data not available.
19:51:44:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:462 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:462 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:483 -> [UART, PM25] Reading data...
19:51:44:483 -> [UART, PM25] Data not available.
19:51:44:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:483 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:483 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:504 -> [UART, PM25] Reading data...
19:51:44:504 -> [UART, PM25] Data not available.
19:51:44:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:504 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:504 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:525 -> [UART, PM25] Reading data...
19:51:44:525 -> [UART, PM25] Data not available.
19:51:44:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:525 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:525 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:546 -> [UART, PM25] Reading data...
19:51:44:547 -> [UART, PM25] Data not available.
19:51:44:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:547 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:547 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:566 -> [UART, PM25] Reading data...
19:51:44:567 -> [UART, PM25] Data not available.
19:51:44:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:567 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:567 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:588 -> [UART, PM25] Reading data...
19:51:44:588 -> [UART, PM25] Data not available.
19:51:44:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:588 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:588 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:609 -> [UART, PM25] Reading data...
19:51:44:609 -> [UART, PM25] Data not available.
19:51:44:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:609 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:609 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:630 -> [UART, PM25] Reading data...
19:51:44:631 -> [UART, PM25] Data not available.
19:51:44:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:631 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:631 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:651 -> [UART, PM25] Reading data...
19:51:44:651 -> [UART, PM25] Data not available.
19:51:44:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:651 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:651 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:672 -> [UART, PM25] Reading data...
19:51:44:672 -> [UART, PM25] Data not available.
19:51:44:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:672 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:672 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:693 -> [UART, PM25] Reading data...
19:51:44:693 -> [UART, PM25] Data not available.
19:51:44:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:693 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:693 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:722 -> [UART, PM25] Reading data...
19:51:44:739 -> [UART, PM25] Data not available.
19:51:44:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:739 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:739 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:739 -> [UART, PM25] Reading data...
19:51:44:739 -> [UART, PM25] Data not available.
19:51:44:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:739 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:739 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:755 -> [UART, PM25] Reading data...
19:51:44:756 -> [UART, PM25] Data not available.
19:51:44:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:756 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:756 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:777 -> [UART, PM25] Reading data...
19:51:44:777 -> [UART, PM25] Data not available.
19:51:44:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:777 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:777 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:798 -> [UART, PM25] Reading data...
19:51:44:798 -> [UART, PM25] Data not available.
19:51:44:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:798 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:798 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:819 -> [UART, PM25] Reading data...
19:51:44:819 -> [UART, PM25] Data not available.
19:51:44:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:819 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:819 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:840 -> [UART, PM25] Reading data...
19:51:44:840 -> [UART, PM25] Data not available.
19:51:44:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:840 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:840 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:861 -> [UART, PM25] Reading data...
19:51:44:861 -> [UART, PM25] Data not available.
19:51:44:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:861 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:861 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:882 -> [UART, PM25] Reading data...
19:51:44:882 -> [UART, PM25] Data not available.
19:51:44:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:882 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:882 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:903 -> [UART, PM25] Reading data...
19:51:44:903 -> [UART, PM25] Data not available.
19:51:44:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:903 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:903 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:924 -> [UART, PM25] Reading data...
19:51:44:924 -> [UART, PM25] Data not available.
19:51:44:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:924 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:924 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:945 -> [UART, PM25] Reading data...
19:51:44:945 -> [UART, PM25] Data not available.
19:51:44:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:945 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:945 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:966 -> [UART, PM25] Reading data...
19:51:44:966 -> [UART, PM25] Data not available.
19:51:44:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:966 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:966 -> [UART, PM25] Uart available, resetting event queue..
19:51:44:987 -> [UART, PM25] Reading data...
19:51:44:987 -> [UART, PM25] Data not available.
19:51:44:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:44:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:44:987 -> [UART, PM25] Uart available, clearing write errors..
19:51:44:987 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:008 -> [UART, PM25] Reading data...
19:51:45:008 -> [UART, PM25] Data not available.
19:51:45:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:008 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:008 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:029 -> [UART, PM25] Reading data...
19:51:45:029 -> [UART, PM25] Data not available.
19:51:45:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:029 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:029 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:052 -> [UART, PM25] Reading data...
19:51:45:054 -> [UART, PM25] Data not available.
19:51:45:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:054 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:054 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:071 -> [UART, PM25] Reading data...
19:51:45:071 -> [UART, PM25] Data not available.
19:51:45:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:071 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:071 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:092 -> [UART, PM25] Reading data...
19:51:45:092 -> [UART, PM25] Data not available.
19:51:45:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:092 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:092 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:113 -> [UART, PM25] Reading data...
19:51:45:113 -> [UART, PM25] Data not available.
19:51:45:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:113 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:113 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:134 -> [UART, PM25] Reading data...
19:51:45:134 -> [UART, PM25] Data not available.
19:51:45:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:134 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:134 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:155 -> [UART, PM25] Reading data...
19:51:45:155 -> [UART, PM25] Data not available.
19:51:45:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:155 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:155 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:176 -> [UART, PM25] Reading data...
19:51:45:176 -> [UART, PM25] Data not available.
19:51:45:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:176 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:176 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:197 -> [UART, PM25] Reading data...
19:51:45:197 -> [UART, PM25] Data not available.
19:51:45:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:197 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:197 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:218 -> [UART, PM25] Reading data...
19:51:45:218 -> [UART, PM25] Data not available.
19:51:45:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:218 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:218 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:239 -> [UART, PM25] Reading data...
19:51:45:239 -> [UART, PM25] Data not available.
19:51:45:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:239 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:239 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:260 -> [UART, PM25] Reading data...
19:51:45:260 -> [UART, PM25] Data not available.
19:51:45:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:260 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:260 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:281 -> [UART, PM25] Reading data...
19:51:45:281 -> [UART, PM25] Data not available.
19:51:45:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:281 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:281 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:301 -> [UART, PM25] Reading data...
19:51:45:302 -> [UART, PM25] Data not available.
19:51:45:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:302 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:302 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:323 -> [UART, PM25] Reading data...
19:51:45:323 -> [UART, PM25] Data not available.
19:51:45:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:323 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:323 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:344 -> [UART, PM25] Reading data...
19:51:45:345 -> [UART, PM25] Data not available.
19:51:45:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:345 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:345 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:365 -> [UART, PM25] Reading data...
19:51:45:365 -> [UART, PM25] Data not available.
19:51:45:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:365 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:365 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:386 -> [UART, PM25] Reading data...
19:51:45:386 -> [UART, PM25] Data not available.
19:51:45:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:386 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:386 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:407 -> [UART, PM25] Reading data...
19:51:45:407 -> [UART, PM25] Data not available.
19:51:45:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:407 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:407 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:427 -> [UART, PM25] Reading data...
19:51:45:428 -> [UART, PM25] Data not available.
19:51:45:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:428 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:428 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:449 -> [UART, PM25] Reading data...
19:51:45:449 -> [UART, PM25] Data not available.
19:51:45:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:449 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:449 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:480 -> [UART, PM25] Reading data...
19:51:45:481 -> [UART, PM25] Data not available.
19:51:45:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:481 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:481 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:491 -> [UART, PM25] Reading data...
19:51:45:491 -> [UART, PM25] Data not available.
19:51:45:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:491 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:491 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:512 -> [UART, PM25] Reading data...
19:51:45:512 -> [UART, PM25] Data not available.
19:51:45:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:512 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:512 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:533 -> [UART, PM25] Reading data...
19:51:45:533 -> [UART, PM25] Data not available.
19:51:45:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:533 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:533 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:554 -> [UART, PM25] Reading data...
19:51:45:554 -> [UART, PM25] Data not available.
19:51:45:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:554 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:554 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:575 -> [UART, PM25] Reading data...
19:51:45:575 -> [UART, PM25] Data not available.
19:51:45:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:575 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:575 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:596 -> [UART, PM25] Reading data...
19:51:45:597 -> [UART, PM25] Data not available.
19:51:45:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:597 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:597 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:617 -> [UART, PM25] Reading data...
19:51:45:617 -> [UART, PM25] Data not available.
19:51:45:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:617 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:617 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:638 -> [UART, PM25] Reading data...
19:51:45:638 -> [UART, PM25] Data not available.
19:51:45:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:638 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:638 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:659 -> [UART, PM25] Reading data...
19:51:45:659 -> [UART, PM25] Data not available.
19:51:45:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:659 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:659 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:680 -> [UART, PM25] Reading data...
19:51:45:680 -> [UART, PM25] Data not available.
19:51:45:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:680 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:680 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:705 -> [UART, PM25] Reading data...
19:51:45:705 -> [UART, PM25] Data not available.
19:51:45:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:706 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:706 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:722 -> [UART, PM25] Reading data...
19:51:45:722 -> [UART, PM25] Data not available.
19:51:45:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:722 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:722 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:743 -> [UART, PM25] Reading data...
19:51:45:743 -> [UART, PM25] Data not available.
19:51:45:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:743 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:743 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:764 -> [UART, PM25] Reading data...
19:51:45:764 -> [UART, PM25] Data not available.
19:51:45:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:764 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:764 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:785 -> [UART, PM25] Reading data...
19:51:45:785 -> [UART, PM25] Data not available.
19:51:45:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:785 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:785 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:806 -> [UART, PM25] Reading data...
19:51:45:806 -> [UART, PM25] Data not available.
19:51:45:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:806 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:806 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:827 -> [UART, PM25] Reading data...
19:51:45:827 -> [UART, PM25] Data not available.
19:51:45:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:827 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:827 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:848 -> [UART, PM25] Reading data...
19:51:45:848 -> [UART, PM25] Data not available.
19:51:45:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:848 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:848 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:869 -> [UART, PM25] Reading data...
19:51:45:869 -> [UART, PM25] Data not available.
19:51:45:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:869 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:869 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:890 -> [UART, PM25] Reading data...
19:51:45:890 -> [UART, PM25] Data not available.
19:51:45:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:890 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:890 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:911 -> [UART, PM25] Reading data...
19:51:45:911 -> [UART, PM25] Data not available.
19:51:45:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:911 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:911 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:932 -> [UART, PM25] Reading data...
19:51:45:932 -> [UART, PM25] Data not available.
19:51:45:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:932 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:932 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:953 -> [UART, PM25] Reading data...
19:51:45:953 -> [UART, PM25] Data not available.
19:51:45:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:953 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:953 -> [UART, PM25] Uart available, resetting event queue..
19:51:45:974 -> [UART, PM25] Reading data...
19:51:45:974 -> [UART, PM25] Data not available.
19:51:45:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:45:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:45:974 -> [UART, PM25] Uart available, clearing write errors..
19:51:45:974 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:003 -> [UART, PM25] Reading data...
19:51:46:003 -> [UART, PM25] Data not available.
19:51:46:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:003 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:003 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:016 -> [UART, PM25] Reading data...
19:51:46:016 -> [UART, PM25] Data not available.
19:51:46:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:016 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:016 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:037 -> [UART, PM25] Reading data...
19:51:46:037 -> [UART, PM25] Data not available.
19:51:46:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:037 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:037 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:058 -> [UART, PM25] Reading data...
19:51:46:058 -> [UART, PM25] Data not available.
19:51:46:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:058 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:058 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:079 -> [UART, PM25] Reading data...
19:51:46:079 -> [UART, PM25] Data not available.
19:51:46:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:079 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:079 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:100 -> [UART, PM25] Reading data...
19:51:46:100 -> [UART, PM25] Data not available.
19:51:46:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:100 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:100 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:121 -> [UART, PM25] Reading data...
19:51:46:121 -> [UART, PM25] Data not available.
19:51:46:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:121 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:121 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:142 -> [UART, PM25] Reading data...
19:51:46:142 -> [UART, PM25] Data not available.
19:51:46:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:142 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:142 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:163 -> [UART, PM25] Reading data...
19:51:46:163 -> [UART, PM25] Data not available.
19:51:46:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:163 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:163 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:184 -> [UART, PM25] Reading data...
19:51:46:184 -> [UART, PM25] Data not available.
19:51:46:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:184 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:184 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:205 -> [UART, PM25] Reading data...
19:51:46:205 -> [UART, PM25] Data not available.
19:51:46:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:205 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:205 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:226 -> [UART, PM25] Reading data...
19:51:46:226 -> [UART, PM25] Data not available.
19:51:46:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:226 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:226 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:246 -> [UART, PM25] Reading data...
19:51:46:247 -> [UART, PM25] Data not available.
19:51:46:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:247 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:247 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:268 -> [UART, PM25] Reading data...
19:51:46:268 -> [UART, PM25] Data not available.
19:51:46:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:268 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:268 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:289 -> [UART, PM25] Reading data...
19:51:46:289 -> [UART, PM25] Data not available.
19:51:46:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:289 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:289 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:310 -> [UART, PM25] Reading data...
19:51:46:311 -> [UART, PM25] Data not available.
19:51:46:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:311 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:311 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:331 -> [UART, PM25] Reading data...
19:51:46:331 -> [UART, PM25] Data not available.
19:51:46:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:331 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:331 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:352 -> [UART, PM25] Reading data...
19:51:46:352 -> [UART, PM25] Data not available.
19:51:46:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:352 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:352 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:373 -> [UART, PM25] Reading data...
19:51:46:373 -> [UART, PM25] Data not available.
19:51:46:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:373 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:373 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:394 -> [UART, PM25] Reading data...
19:51:46:394 -> [UART, PM25] Data not available.
19:51:46:394 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:394 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:394 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:394 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:415 -> [UART, PM25] Reading data...
19:51:46:415 -> [UART, PM25] Data not available.
19:51:46:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:415 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:415 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:436 -> [UART, PM25] Reading data...
19:51:46:436 -> [UART, PM25] Data not available.
19:51:46:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:436 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:436 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:457 -> [UART, PM25] Reading data...
19:51:46:457 -> [UART, PM25] Data not available.
19:51:46:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:457 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:457 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:478 -> [UART, PM25] Reading data...
19:51:46:478 -> [UART, PM25] Data not available.
19:51:46:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:478 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:478 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:499 -> [UART, PM25] Reading data...
19:51:46:499 -> [UART, PM25] Data not available.
19:51:46:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:499 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:499 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:520 -> [UART, PM25] Reading data...
19:51:46:521 -> [UART, PM25] Data not available.
19:51:46:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:521 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:521 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:540 -> [UART, PM25] Reading data...
19:51:46:541 -> [UART, PM25] Data not available.
19:51:46:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:541 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:541 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:588 -> [UART, PM25] Reading data...
19:51:46:601 -> [UART, PM25] Data not available.
19:51:46:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:601 -> [UART, PM25] Reading data...
19:51:46:601 -> [UART, PM25] Data not available.
19:51:46:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:601 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:601 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:603 -> [UART, PM25] Reading data...
19:51:46:604 -> [UART, PM25] Data not available.
19:51:46:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:604 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:604 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:625 -> [UART, PM25] Reading data...
19:51:46:625 -> [UART, PM25] Data not available.
19:51:46:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:625 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:625 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:646 -> [UART, PM25] Reading data...
19:51:46:646 -> [UART, PM25] Data not available.
19:51:46:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:646 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:646 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:667 -> [UART, PM25] Reading data...
19:51:46:667 -> [UART, PM25] Data not available.
19:51:46:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:667 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:667 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:689 -> [UART, PM25] Reading data...
19:51:46:690 -> [UART, PM25] Data not available.
19:51:46:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:690 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:690 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:709 -> [UART, PM25] Reading data...
19:51:46:709 -> [UART, PM25] Data not available.
19:51:46:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:709 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:709 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:730 -> [UART, PM25] Reading data...
19:51:46:730 -> [UART, PM25] Data not available.
19:51:46:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:730 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:730 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:751 -> [UART, PM25] Reading data...
19:51:46:751 -> [UART, PM25] Data not available.
19:51:46:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:751 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:751 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:772 -> [UART, PM25] Reading data...
19:51:46:772 -> [UART, PM25] Data not available.
19:51:46:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:772 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:772 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:792 -> [UART, PM25] Reading data...
19:51:46:793 -> [UART, PM25] Data not available.
19:51:46:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:793 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:793 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:814 -> [UART, PM25] Reading data...
19:51:46:814 -> [UART, PM25] Data not available.
19:51:46:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:814 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:814 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:835 -> [UART, PM25] Reading data...
19:51:46:835 -> [UART, PM25] Data not available.
19:51:46:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:835 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:835 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:856 -> [UART, PM25] Reading data...
19:51:46:856 -> [UART, PM25] Data not available.
19:51:46:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:856 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:856 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:877 -> [UART, PM25] Reading data...
19:51:46:877 -> [UART, PM25] Data not available.
19:51:46:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:877 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:877 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:898 -> [UART, PM25] Reading data...
19:51:46:898 -> [UART, PM25] Data not available.
19:51:46:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:898 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:898 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:919 -> [UART, PM25] Reading data...
19:51:46:920 -> [UART, PM25] Data not available.
19:51:46:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:920 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:920 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:939 -> [UART, PM25] Reading data...
19:51:46:940 -> [UART, PM25] Data not available.
19:51:46:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:940 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:940 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:961 -> [UART, PM25] Reading data...
19:51:46:961 -> [UART, PM25] Data not available.
19:51:46:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:961 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:961 -> [UART, PM25] Uart available, resetting event queue..
19:51:46:982 -> [UART, PM25] Reading data...
19:51:46:982 -> [UART, PM25] Data not available.
19:51:46:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:46:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:46:982 -> [UART, PM25] Uart available, clearing write errors..
19:51:46:982 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:003 -> [UART, PM25] Reading data...
19:51:47:003 -> [UART, PM25] Data not available.
19:51:47:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:003 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:003 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:035 -> [UART, PM25] Reading data...
19:51:47:036 -> [UART, PM25] Data not available.
19:51:47:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:045 -> [UART, PM25] Reading data...
19:51:47:045 -> [UART, PM25] Data not available.
19:51:47:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:045 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:045 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:066 -> [UART, PM25] Reading data...
19:51:47:066 -> [UART, PM25] Data not available.
19:51:47:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:066 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:066 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:087 -> [UART, PM25] Reading data...
19:51:47:087 -> [UART, PM25] Data not available.
19:51:47:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:087 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:087 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:108 -> [UART, PM25] Reading data...
19:51:47:108 -> [UART, PM25] Data not available.
19:51:47:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:108 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:108 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:129 -> [UART, PM25] Reading data...
19:51:47:129 -> [UART, PM25] Data not available.
19:51:47:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:129 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:129 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:150 -> [UART, PM25] Reading data...
19:51:47:150 -> [UART, PM25] Data not available.
19:51:47:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:150 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:150 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:171 -> [UART, PM25] Reading data...
19:51:47:171 -> [UART, PM25] Data not available.
19:51:47:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:171 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:171 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:192 -> [UART, PM25] Reading data...
19:51:47:192 -> [UART, PM25] Data not available.
19:51:47:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:192 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:192 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:213 -> [UART, PM25] Reading data...
19:51:47:213 -> [UART, PM25] Data not available.
19:51:47:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:213 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:213 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:234 -> [UART, PM25] Reading data...
19:51:47:234 -> [UART, PM25] Data not available.
19:51:47:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:234 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:234 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:255 -> [UART, PM25] Reading data...
19:51:47:255 -> [UART, PM25] Data not available.
19:51:47:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:255 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:255 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:276 -> [UART, PM25] Reading data...
19:51:47:276 -> [UART, PM25] Data not available.
19:51:47:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:276 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:276 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:297 -> [UART, PM25] Reading data...
19:51:47:297 -> [UART, PM25] Data not available.
19:51:47:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:297 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:297 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:318 -> [UART, PM25] Reading data...
19:51:47:318 -> [UART, PM25] Data not available.
19:51:47:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:318 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:318 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:339 -> [UART, PM25] Reading data...
19:51:47:339 -> [UART, PM25] Data not available.
19:51:47:339 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:339 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:339 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:339 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:360 -> [UART, PM25] Reading data...
19:51:47:360 -> [UART, PM25] Data not available.
19:51:47:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:360 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:360 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:381 -> [UART, PM25] Reading data...
19:51:47:381 -> [UART, PM25] Data not available.
19:51:47:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:381 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:381 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:402 -> [UART, PM25] Reading data...
19:51:47:402 -> [UART, PM25] Data not available.
19:51:47:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:402 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:402 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:402 -> PING!
19:51:47:616 -> [UART, PM25] Reading data...
19:51:47:617 -> [UART, PM25] Data not available.
19:51:47:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:617 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:617 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:637 -> [UART, PM25] Reading data...
19:51:47:637 -> [UART, PM25] Data not available.
19:51:47:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:637 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:637 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:658 -> [UART, PM25] Reading data...
19:51:47:658 -> [UART, PM25] Data not available.
19:51:47:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:658 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:658 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:679 -> [UART, PM25] Reading data...
19:51:47:680 -> [UART, PM25] Data not available.
19:51:47:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:680 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:680 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:700 -> [UART, PM25] Reading data...
19:51:47:700 -> [UART, PM25] Data not available.
19:51:47:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:700 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:700 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:721 -> [UART, PM25] Reading data...
19:51:47:721 -> [UART, PM25] Data not available.
19:51:47:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:721 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:721 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:742 -> [UART, PM25] Reading data...
19:51:47:742 -> [UART, PM25] Data not available.
19:51:47:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:742 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:742 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:763 -> [UART, PM25] Reading data...
19:51:47:763 -> [UART, PM25] Data not available.
19:51:47:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:763 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:763 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:784 -> [UART, PM25] Reading data...
19:51:47:784 -> [UART, PM25] Data not available.
19:51:47:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:805 -> [UART, PM25] Reading data...
19:51:47:805 -> [UART, PM25] Data not available.
19:51:47:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:805 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:805 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:826 -> [UART, PM25] Reading data...
19:51:47:826 -> [UART, PM25] Data not available.
19:51:47:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:826 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:826 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:847 -> [UART, PM25] Reading data...
19:51:47:847 -> [UART, PM25] Data not available.
19:51:47:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:847 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:847 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:868 -> [UART, PM25] Reading data...
19:51:47:868 -> [UART, PM25] Data not available.
19:51:47:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:868 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:868 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:889 -> [UART, PM25] Reading data...
19:51:47:889 -> [UART, PM25] Data not available.
19:51:47:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:889 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:889 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:910 -> [UART, PM25] Reading data...
19:51:47:910 -> [UART, PM25] Data not available.
19:51:47:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:910 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:910 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:931 -> [UART, PM25] Reading data...
19:51:47:931 -> [UART, PM25] Data not available.
19:51:47:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:931 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:931 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:952 -> [UART, PM25] Reading data...
19:51:47:952 -> [UART, PM25] Data not available.
19:51:47:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:952 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:952 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:973 -> [UART, PM25] Reading data...
19:51:47:973 -> [UART, PM25] Data not available.
19:51:47:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:973 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:973 -> [UART, PM25] Uart available, resetting event queue..
19:51:47:994 -> [UART, PM25] Reading data...
19:51:47:995 -> [UART, PM25] Data not available.
19:51:47:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:47:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:47:995 -> [UART, PM25] Uart available, clearing write errors..
19:51:47:995 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:015 -> [UART, PM25] Reading data...
19:51:48:015 -> [UART, PM25] Data not available.
19:51:48:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:015 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:015 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:036 -> [UART, PM25] Reading data...
19:51:48:036 -> [UART, PM25] Data not available.
19:51:48:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:036 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:036 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:066 -> [UART, PM25] Reading data...
19:51:48:067 -> [UART, PM25] Data not available.
19:51:48:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:067 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:067 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:077 -> [UART, PM25] Reading data...
19:51:48:078 -> [UART, PM25] Data not available.
19:51:48:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:078 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:078 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:099 -> [UART, PM25] Reading data...
19:51:48:099 -> [UART, PM25] Data not available.
19:51:48:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:099 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:099 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:120 -> [UART, PM25] Reading data...
19:51:48:120 -> [UART, PM25] Data not available.
19:51:48:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:120 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:120 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:140 -> [UART, PM25] Reading data...
19:51:48:141 -> [UART, PM25] Data not available.
19:51:48:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:141 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:141 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:162 -> [UART, PM25] Reading data...
19:51:48:162 -> [UART, PM25] Data not available.
19:51:48:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:162 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:162 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:183 -> [UART, PM25] Reading data...
19:51:48:183 -> [UART, PM25] Data not available.
19:51:48:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:183 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:183 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:204 -> [UART, PM25] Reading data...
19:51:48:204 -> [UART, PM25] Data not available.
19:51:48:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:204 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:204 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:225 -> [UART, PM25] Reading data...
19:51:48:225 -> [UART, PM25] Data not available.
19:51:48:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:225 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:225 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:246 -> [UART, PM25] Reading data...
19:51:48:246 -> [UART, PM25] Data not available.
19:51:48:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:246 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:246 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:267 -> [UART, PM25] Reading data...
19:51:48:267 -> [UART, PM25] Data not available.
19:51:48:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:267 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:267 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:288 -> [UART, PM25] Reading data...
19:51:48:288 -> [UART, PM25] Data not available.
19:51:48:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:288 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:288 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:309 -> [UART, PM25] Reading data...
19:51:48:309 -> [UART, PM25] Data not available.
19:51:48:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:309 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:309 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:329 -> [UART, PM25] Reading data...
19:51:48:330 -> [UART, PM25] Data not available.
19:51:48:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:330 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:330 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:351 -> [UART, PM25] Reading data...
19:51:48:351 -> [UART, PM25] Data not available.
19:51:48:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:351 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:351 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:372 -> [UART, PM25] Reading data...
19:51:48:372 -> [UART, PM25] Data not available.
19:51:48:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:372 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:372 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:393 -> [UART, PM25] Reading data...
19:51:48:393 -> [UART, PM25] Data not available.
19:51:48:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:393 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:393 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:414 -> [UART, PM25] Reading data...
19:51:48:414 -> [UART, PM25] Data not available.
19:51:48:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:414 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:414 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:464 -> [UART, PM25] Reading data...
19:51:48:469 -> [UART, PM25] Data not available.
19:51:48:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:469 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:469 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:469 -> [UART, PM25] Reading data...
19:51:48:469 -> [UART, PM25] Data not available.
19:51:48:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:469 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:469 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:477 -> [UART, PM25] Reading data...
19:51:48:477 -> [UART, PM25] Data not available.
19:51:48:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:477 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:477 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:501 -> [UART, PM25] Reading data...
19:51:48:502 -> [UART, PM25] Data not available.
19:51:48:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:502 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:502 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:519 -> [UART, PM25] Reading data...
19:51:48:519 -> [UART, PM25] Data not available.
19:51:48:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:519 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:519 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:540 -> [UART, PM25] Reading data...
19:51:48:540 -> [UART, PM25] Data not available.
19:51:48:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:540 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:540 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:561 -> [UART, PM25] Reading data...
19:51:48:561 -> [UART, PM25] Data not available.
19:51:48:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:561 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:561 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:592 -> [UART, PM25] Reading data...
19:51:48:593 -> [UART, PM25] Data not available.
19:51:48:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:593 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:593 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:603 -> [UART, PM25] Reading data...
19:51:48:603 -> [UART, PM25] Data not available.
19:51:48:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:603 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:603 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:624 -> [UART, PM25] Reading data...
19:51:48:624 -> [UART, PM25] Data not available.
19:51:48:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:624 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:624 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:645 -> [UART, PM25] Reading data...
19:51:48:645 -> [UART, PM25] Data not available.
19:51:48:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:645 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:645 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:665 -> [UART, PM25] Reading data...
19:51:48:666 -> [UART, PM25] Data not available.
19:51:48:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:666 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:666 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:687 -> [UART, PM25] Reading data...
19:51:48:687 -> [UART, PM25] Data not available.
19:51:48:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:687 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:687 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:708 -> [UART, PM25] Reading data...
19:51:48:708 -> [UART, PM25] Data not available.
19:51:48:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:708 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:708 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:729 -> [UART, PM25] Reading data...
19:51:48:729 -> [UART, PM25] Data not available.
19:51:48:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:729 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:729 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:750 -> [UART, PM25] Reading data...
19:51:48:750 -> [UART, PM25] Data not available.
19:51:48:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:750 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:750 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:770 -> [UART, PM25] Reading data...
19:51:48:771 -> [UART, PM25] Data not available.
19:51:48:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:771 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:771 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:792 -> [UART, PM25] Reading data...
19:51:48:792 -> [UART, PM25] Data not available.
19:51:48:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:792 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:792 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:813 -> [UART, PM25] Reading data...
19:51:48:815 -> [UART, PM25] Data not available.
19:51:48:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:815 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:815 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:834 -> [UART, PM25] Reading data...
19:51:48:834 -> [UART, PM25] Data not available.
19:51:48:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:834 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:834 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:855 -> [UART, PM25] Reading data...
19:51:48:855 -> [UART, PM25] Data not available.
19:51:48:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:855 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:855 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:876 -> [UART, PM25] Reading data...
19:51:48:876 -> [UART, PM25] Data not available.
19:51:48:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:876 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:876 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:897 -> [UART, PM25] Reading data...
19:51:48:897 -> [UART, PM25] Data not available.
19:51:48:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:897 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:897 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:918 -> [UART, PM25] Reading data...
19:51:48:918 -> [UART, PM25] Data not available.
19:51:48:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:918 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:918 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:939 -> [UART, PM25] Reading data...
19:51:48:939 -> [UART, PM25] Data not available.
19:51:48:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:939 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:939 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:960 -> [UART, PM25] Reading data...
19:51:48:963 -> [UART, PM25] Data not available.
19:51:48:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:963 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:963 -> [UART, PM25] Uart available, resetting event queue..
19:51:48:980 -> [UART, PM25] Reading data...
19:51:48:981 -> [UART, PM25] Data not available.
19:51:48:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:48:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:48:981 -> [UART, PM25] Uart available, clearing write errors..
19:51:48:981 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:002 -> [UART, PM25] Reading data...
19:51:49:002 -> [UART, PM25] Data not available.
19:51:49:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:002 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:002 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:023 -> [UART, PM25] Reading data...
19:51:49:023 -> [UART, PM25] Data not available.
19:51:49:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:023 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:023 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:044 -> [UART, PM25] Reading data...
19:51:49:044 -> [UART, PM25] Data not available.
19:51:49:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:044 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:044 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:065 -> [UART, PM25] Reading data...
19:51:49:065 -> [UART, PM25] Data not available.
19:51:49:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:065 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:065 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:086 -> [UART, PM25] Reading data...
19:51:49:086 -> [UART, PM25] Data not available.
19:51:49:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:086 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:086 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:108 -> [UART, PM25] Reading data...
19:51:49:108 -> [UART, PM25] Data not available.
19:51:49:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:108 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:108 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:128 -> [UART, PM25] Reading data...
19:51:49:128 -> [UART, PM25] Data not available.
19:51:49:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:128 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:128 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:149 -> [UART, PM25] Reading data...
19:51:49:149 -> [UART, PM25] Data not available.
19:51:49:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:149 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:149 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:170 -> [UART, PM25] Reading data...
19:51:49:170 -> [UART, PM25] Data not available.
19:51:49:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:170 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:170 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:191 -> [UART, PM25] Reading data...
19:51:49:191 -> [UART, PM25] Data not available.
19:51:49:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:191 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:191 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:212 -> [UART, PM25] Reading data...
19:51:49:212 -> [UART, PM25] Data not available.
19:51:49:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:212 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:212 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:233 -> [UART, PM25] Reading data...
19:51:49:234 -> [UART, PM25] Data not available.
19:51:49:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:234 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:234 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:254 -> [UART, PM25] Reading data...
19:51:49:255 -> [UART, PM25] Data not available.
19:51:49:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:255 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:255 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:274 -> [UART, PM25] Reading data...
19:51:49:275 -> [UART, PM25] Data not available.
19:51:49:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:275 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:275 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:296 -> [UART, PM25] Reading data...
19:51:49:296 -> [UART, PM25] Data not available.
19:51:49:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:296 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:296 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:317 -> [UART, PM25] Reading data...
19:51:49:317 -> [UART, PM25] Data not available.
19:51:49:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:317 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:317 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:338 -> [UART, PM25] Reading data...
19:51:49:338 -> [UART, PM25] Data not available.
19:51:49:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:338 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:338 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:359 -> [UART, PM25] Reading data...
19:51:49:359 -> [UART, PM25] Data not available.
19:51:49:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:359 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:359 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:381 -> [UART, PM25] Reading data...
19:51:49:382 -> [UART, PM25] Data not available.
19:51:49:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:382 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:382 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:401 -> [UART, PM25] Reading data...
19:51:49:401 -> [UART, PM25] Data not available.
19:51:49:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:401 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:401 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:422 -> [UART, PM25] Reading data...
19:51:49:422 -> [UART, PM25] Data not available.
19:51:49:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:422 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:422 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:443 -> [UART, PM25] Reading data...
19:51:49:443 -> [UART, PM25] Data not available.
19:51:49:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:443 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:443 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:464 -> [UART, PM25] Reading data...
19:51:49:464 -> [UART, PM25] Data not available.
19:51:49:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:464 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:464 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:485 -> [UART, PM25] Reading data...
19:51:49:485 -> [UART, PM25] Data not available.
19:51:49:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:485 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:485 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:506 -> [UART, PM25] Reading data...
19:51:49:506 -> [UART, PM25] Data not available.
19:51:49:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:506 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:506 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:527 -> [UART, PM25] Reading data...
19:51:49:527 -> [UART, PM25] Data not available.
19:51:49:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:527 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:527 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:548 -> [UART, PM25] Reading data...
19:51:49:548 -> [UART, PM25] Data not available.
19:51:49:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:548 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:548 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:569 -> [UART, PM25] Reading data...
19:51:49:569 -> [UART, PM25] Data not available.
19:51:49:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:569 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:569 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:589 -> [UART, PM25] Reading data...
19:51:49:590 -> [UART, PM25] Data not available.
19:51:49:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:621 -> [UART, PM25] Reading data...
19:51:49:622 -> [UART, PM25] Data not available.
19:51:49:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:622 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:622 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:632 -> [UART, PM25] Reading data...
19:51:49:632 -> [UART, PM25] Data not available.
19:51:49:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:632 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:632 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:653 -> [UART, PM25] Reading data...
19:51:49:653 -> [UART, PM25] Data not available.
19:51:49:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:653 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:653 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:674 -> [UART, PM25] Reading data...
19:51:49:674 -> [UART, PM25] Data not available.
19:51:49:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:674 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:674 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:695 -> [UART, PM25] Reading data...
19:51:49:695 -> [UART, PM25] Data not available.
19:51:49:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:695 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:695 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:716 -> [UART, PM25] Reading data...
19:51:49:716 -> [UART, PM25] Data not available.
19:51:49:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:716 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:716 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:737 -> [UART, PM25] Reading data...
19:51:49:737 -> [UART, PM25] Data not available.
19:51:49:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:737 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:737 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:758 -> [UART, PM25] Reading data...
19:51:49:758 -> [UART, PM25] Data not available.
19:51:49:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:758 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:758 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:779 -> [UART, PM25] Reading data...
19:51:49:779 -> [UART, PM25] Data not available.
19:51:49:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:779 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:779 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:800 -> [UART, PM25] Reading data...
19:51:49:800 -> [UART, PM25] Data not available.
19:51:49:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:800 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:800 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:821 -> [UART, PM25] Reading data...
19:51:49:821 -> [UART, PM25] Data not available.
19:51:49:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:821 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:821 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:842 -> [UART, PM25] Reading data...
19:51:49:842 -> [UART, PM25] Data not available.
19:51:49:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:842 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:842 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:863 -> [UART, PM25] Reading data...
19:51:49:863 -> [UART, PM25] Data not available.
19:51:49:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:863 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:863 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:884 -> [UART, PM25] Reading data...
19:51:49:884 -> [UART, PM25] Data not available.
19:51:49:884 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:884 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:884 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:884 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:905 -> [UART, PM25] Reading data...
19:51:49:905 -> [UART, PM25] Data not available.
19:51:49:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:905 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:905 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:926 -> [UART, PM25] Reading data...
19:51:49:926 -> [UART, PM25] Data not available.
19:51:49:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:926 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:926 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:947 -> [UART, PM25] Reading data...
19:51:49:947 -> [UART, PM25] Data not available.
19:51:49:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:947 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:947 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:968 -> [UART, PM25] Reading data...
19:51:49:968 -> [UART, PM25] Data not available.
19:51:49:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:968 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:968 -> [UART, PM25] Uart available, resetting event queue..
19:51:49:989 -> [UART, PM25] Reading data...
19:51:49:989 -> [UART, PM25] Data not available.
19:51:49:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:49:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:49:989 -> [UART, PM25] Uart available, clearing write errors..
19:51:49:989 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:010 -> [UART, PM25] Reading data...
19:51:50:010 -> [UART, PM25] Data not available.
19:51:50:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:010 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:010 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:031 -> [UART, PM25] Reading data...
19:51:50:031 -> [UART, PM25] Data not available.
19:51:50:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:031 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:031 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:052 -> [UART, PM25] Reading data...
19:51:50:052 -> [UART, PM25] Data not available.
19:51:50:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:052 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:052 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:072 -> [UART, PM25] Reading data...
19:51:50:073 -> [UART, PM25] Data not available.
19:51:50:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:073 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:073 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:094 -> [UART, PM25] Reading data...
19:51:50:094 -> [UART, PM25] Data not available.
19:51:50:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:094 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:094 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:115 -> [UART, PM25] Reading data...
19:51:50:115 -> [UART, PM25] Data not available.
19:51:50:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:115 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:115 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:144 -> [UART, PM25] Reading data...
19:51:50:144 -> [UART, PM25] Data not available.
19:51:50:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:144 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:144 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:157 -> [UART, PM25] Reading data...19:51:50:200 -> [UART, PM25] Reading data...19:51:50:178 -> [UART, PM25] Reading data...
19:51:50:178 -> [UART, PM25] Data not available.
19:51:50:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:178 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:178 -> [UART, PM25] Uart available, resetting event queue..

19:51:50:157 -> [UART, PM25] Data not available.
19:51:50:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:157 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:157 -> [UART, PM25] Uart available, resetting event queue..

19:51:50:200 -> [UART, PM25] Data not available.
19:51:50:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:200 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:200 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:220 -> [UART, PM25] Reading data...
19:51:50:220 -> [UART, PM25] Data not available.
19:51:50:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:220 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:220 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:241 -> [UART, PM25] Reading data...
19:51:50:241 -> [UART, PM25] Data not available.
19:51:50:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:241 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:241 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:262 -> [UART, PM25] Reading data...
19:51:50:262 -> [UART, PM25] Data not available.
19:51:50:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:262 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:262 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:283 -> [UART, PM25] Reading data...
19:51:50:283 -> [UART, PM25] Data not available.
19:51:50:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:283 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:283 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:305 -> [UART, PM25] Reading data...
19:51:50:306 -> [UART, PM25] Data not available.
19:51:50:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:306 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:306 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:325 -> [UART, PM25] Reading data...
19:51:50:340 -> [UART, PM25] Data not available.
19:51:50:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:340 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:340 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:354 -> [UART, PM25] Reading data...
19:51:50:354 -> [UART, PM25] Data not available.
19:51:50:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:354 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:354 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:367 -> [UART, PM25] Reading data...
19:51:50:367 -> [UART, PM25] Data not available.
19:51:50:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:367 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:367 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:387 -> [UART, PM25] Reading data...
19:51:50:388 -> [UART, PM25] Data not available.
19:51:50:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:388 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:388 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:408 -> [UART, PM25] Reading data...
19:51:50:409 -> [UART, PM25] Data not available.
19:51:50:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:409 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:409 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:429 -> [UART, PM25] Reading data...
19:51:50:430 -> [UART, PM25] Data not available.
19:51:50:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:430 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:430 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:451 -> [UART, PM25] Reading data...
19:51:50:451 -> [UART, PM25] Data not available.
19:51:50:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:451 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:451 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:472 -> [UART, PM25] Reading data...
19:51:50:472 -> [UART, PM25] Data not available.
19:51:50:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:472 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:472 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:492 -> [UART, PM25] Reading data...
19:51:50:493 -> [UART, PM25] Data not available.
19:51:50:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:493 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:493 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:513 -> [UART, PM25] Reading data...
19:51:50:514 -> [UART, PM25] Data not available.
19:51:50:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:514 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:514 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:535 -> [UART, PM25] Reading data...
19:51:50:535 -> [UART, PM25] Data not available.
19:51:50:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:535 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:535 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:556 -> [UART, PM25] Reading data...
19:51:50:556 -> [UART, PM25] Data not available.
19:51:50:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:556 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:556 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:576 -> [UART, PM25] Reading data...
19:51:50:577 -> [UART, PM25] Data not available.
19:51:50:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:577 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:577 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:598 -> [UART, PM25] Reading data...
19:51:50:598 -> [UART, PM25] Data not available.
19:51:50:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:598 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:598 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:619 -> [UART, PM25] Reading data...
19:51:50:619 -> [UART, PM25] Data not available.
19:51:50:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:619 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:619 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:640 -> [UART, PM25] Reading data...
19:51:50:640 -> [UART, PM25] Data not available.
19:51:50:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:640 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:640 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:663 -> [UART, PM25] Reading data...
19:51:50:664 -> [UART, PM25] Data not available.
19:51:50:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:664 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:664 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:682 -> [UART, PM25] Reading data...
19:51:50:682 -> [UART, PM25] Data not available.
19:51:50:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:682 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:682 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:703 -> [UART, PM25] Reading data...
19:51:50:703 -> [UART, PM25] Data not available.
19:51:50:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:703 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:703 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:724 -> [UART, PM25] Reading data...
19:51:50:724 -> [UART, PM25] Data not available.
19:51:50:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:724 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:724 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:745 -> [UART, PM25] Reading data...
19:51:50:745 -> [UART, PM25] Data not available.
19:51:50:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:746 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:746 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:766 -> [UART, PM25] Reading data...
19:51:50:766 -> [UART, PM25] Data not available.
19:51:50:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:766 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:766 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:786 -> [UART, PM25] Reading data...
19:51:50:787 -> [UART, PM25] Data not available.
19:51:50:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:787 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:787 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:808 -> [UART, PM25] Reading data...
19:51:50:808 -> [UART, PM25] Data not available.
19:51:50:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:808 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:808 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:828 -> [UART, PM25] Reading data...
19:51:50:829 -> [UART, PM25] Data not available.
19:51:50:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:850 -> [UART, PM25] Reading data...
19:51:50:850 -> [UART, PM25] Data not available.
19:51:50:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:850 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:850 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:871 -> [UART, PM25] Reading data...
19:51:50:871 -> [UART, PM25] Data not available.
19:51:50:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:871 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:871 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:891 -> [UART, PM25] Reading data...
19:51:50:892 -> [UART, PM25] Data not available.
19:51:50:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:892 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:892 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:914 -> [UART, PM25] Reading data...
19:51:50:914 -> [UART, PM25] Data not available.
19:51:50:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:914 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:914 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:934 -> [UART, PM25] Reading data...
19:51:50:934 -> [UART, PM25] Data not available.
19:51:50:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:934 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:934 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:954 -> [UART, PM25] Reading data...
19:51:50:955 -> [UART, PM25] Data not available.
19:51:50:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:955 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:955 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:976 -> [UART, PM25] Reading data...
19:51:50:976 -> [UART, PM25] Data not available.
19:51:50:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:976 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:976 -> [UART, PM25] Uart available, resetting event queue..
19:51:50:996 -> [UART, PM25] Reading data...
19:51:50:997 -> [UART, PM25] Data not available.
19:51:50:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:50:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:50:997 -> [UART, PM25] Uart available, clearing write errors..
19:51:50:997 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:017 -> [UART, PM25] Reading data...
19:51:51:018 -> [UART, PM25] Data not available.
19:51:51:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:018 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:018 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:038 -> [UART, PM25] Reading data...
19:51:51:039 -> [UART, PM25] Data not available.
19:51:51:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:039 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:039 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:059 -> [UART, PM25] Reading data...
19:51:51:060 -> [UART, PM25] Data not available.
19:51:51:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:060 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:060 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:081 -> [UART, PM25] Reading data...
19:51:51:081 -> [UART, PM25] Data not available.
19:51:51:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:081 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:081 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:102 -> [UART, PM25] Reading data...
19:51:51:102 -> [UART, PM25] Data not available.
19:51:51:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:102 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:102 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:126 -> [UART, PM25] Reading data...
19:51:51:127 -> [UART, PM25] Data not available.
19:51:51:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:127 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:127 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:143 -> [UART, PM25] Reading data...
19:51:51:144 -> [UART, PM25] Data not available.
19:51:51:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:144 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:144 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:180 -> [UART, PM25] Reading data...
19:51:51:180 -> [UART, PM25] Data not available.
19:51:51:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:180 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:180 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:186 -> [UART, PM25] Reading data...
19:51:51:186 -> [UART, PM25] Data not available.
19:51:51:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:186 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:186 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:206 -> [UART, PM25] Reading data...
19:51:51:207 -> [UART, PM25] Data not available.
19:51:51:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:207 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:207 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:228 -> [UART, PM25] Reading data...
19:51:51:228 -> [UART, PM25] Data not available.
19:51:51:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:228 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:228 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:248 -> [UART, PM25] Reading data...
19:51:51:249 -> [UART, PM25] Data not available.
19:51:51:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:249 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:249 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:270 -> [UART, PM25] Reading data...
19:51:51:270 -> [UART, PM25] Data not available.
19:51:51:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:270 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:270 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:291 -> [UART, PM25] Reading data...
19:51:51:291 -> [UART, PM25] Data not available.
19:51:51:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:291 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:291 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:312 -> [UART, PM25] Reading data...
19:51:51:312 -> [UART, PM25] Data not available.
19:51:51:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:312 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:312 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:332 -> [UART, PM25] Reading data...
19:51:51:333 -> [UART, PM25] Data not available.
19:51:51:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:333 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:333 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:354 -> [UART, PM25] Reading data...
19:51:51:354 -> [UART, PM25] Data not available.
19:51:51:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:354 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:354 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:375 -> [UART, PM25] Reading data...
19:51:51:375 -> [UART, PM25] Data not available.
19:51:51:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:375 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:375 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:395 -> [UART, PM25] Reading data...
19:51:51:396 -> [UART, PM25] Data not available.
19:51:51:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:396 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:396 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:417 -> [UART, PM25] Reading data...
19:51:51:417 -> [UART, PM25] Data not available.
19:51:51:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:417 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:417 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:438 -> [UART, PM25] Reading data...
19:51:51:438 -> [UART, PM25] Data not available.
19:51:51:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:438 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:438 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:458 -> [UART, PM25] Reading data...
19:51:51:459 -> [UART, PM25] Data not available.
19:51:51:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:459 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:459 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:480 -> [UART, PM25] Reading data...
19:51:51:480 -> [UART, PM25] Data not available.
19:51:51:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:480 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:480 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:501 -> [UART, PM25] Reading data...
19:51:51:501 -> [UART, PM25] Data not available.
19:51:51:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:501 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:501 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:522 -> [UART, PM25] Reading data...
19:51:51:522 -> [UART, PM25] Data not available.
19:51:51:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:522 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:522 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:543 -> [UART, PM25] Reading data...
19:51:51:543 -> [UART, PM25] Data not available.
19:51:51:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:543 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:543 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:564 -> [UART, PM25] Reading data...
19:51:51:564 -> [UART, PM25] Data not available.
19:51:51:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:564 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:564 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:585 -> [UART, PM25] Reading data...
19:51:51:585 -> [UART, PM25] Data not available.
19:51:51:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:585 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:585 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:605 -> [UART, PM25] Reading data...
19:51:51:606 -> [UART, PM25] Data not available.
19:51:51:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:606 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:606 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:627 -> [UART, PM25] Reading data...
19:51:51:627 -> [UART, PM25] Data not available.
19:51:51:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:627 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:627 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:648 -> [UART, PM25] Reading data...
19:51:51:648 -> [UART, PM25] Data not available.
19:51:51:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:648 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:648 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:669 -> [UART, PM25] Reading data...
19:51:51:669 -> [UART, PM25] Data not available.
19:51:51:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:669 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:669 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:691 -> [UART, PM25] Reading data...
19:51:51:691 -> [UART, PM25] Data not available.
19:51:51:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:711 -> [UART, PM25] Reading data...
19:51:51:711 -> [UART, PM25] Data not available.
19:51:51:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:711 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:711 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:732 -> [UART, PM25] Reading data...
19:51:51:732 -> [UART, PM25] Data not available.
19:51:51:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:732 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:732 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:753 -> [UART, PM25] Reading data...
19:51:51:753 -> [UART, PM25] Data not available.
19:51:51:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:753 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:753 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:773 -> [UART, PM25] Reading data...
19:51:51:774 -> [UART, PM25] Data not available.
19:51:51:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:774 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:774 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:795 -> [UART, PM25] Reading data...
19:51:51:795 -> [UART, PM25] Data not available.
19:51:51:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:795 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:795 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:816 -> [UART, PM25] Reading data...
19:51:51:816 -> [UART, PM25] Data not available.
19:51:51:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:816 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:816 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:836 -> [UART, PM25] Reading data...
19:51:51:837 -> [UART, PM25] Data not available.
19:51:51:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:837 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:837 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:858 -> [UART, PM25] Reading data...
19:51:51:858 -> [UART, PM25] Data not available.
19:51:51:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:858 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:858 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:878 -> [UART, PM25] Reading data...
19:51:51:879 -> [UART, PM25] Data not available.
19:51:51:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:879 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:879 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:900 -> [UART, PM25] Reading data...
19:51:51:900 -> [UART, PM25] Data not available.
19:51:51:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:900 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:900 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:920 -> [UART, PM25] Reading data...
19:51:51:921 -> [UART, PM25] Data not available.
19:51:51:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:921 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:921 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:942 -> [UART, PM25] Reading data...
19:51:51:942 -> [UART, PM25] Data not available.
19:51:51:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:942 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:942 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:963 -> [UART, PM25] Reading data...
19:51:51:963 -> [UART, PM25] Data not available.
19:51:51:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:963 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:963 -> [UART, PM25] Uart available, resetting event queue..
19:51:51:984 -> [UART, PM25] Reading data...
19:51:51:984 -> [UART, PM25] Data not available.
19:51:51:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:51:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:51:984 -> [UART, PM25] Uart available, clearing write errors..
19:51:51:984 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:005 -> [UART, PM25] Reading data...
19:51:52:005 -> [UART, PM25] Data not available.
19:51:52:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:005 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:005 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:026 -> [UART, PM25] Reading data...
19:51:52:026 -> [UART, PM25] Data not available.
19:51:52:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:026 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:026 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:046 -> [UART, PM25] Reading data...
19:51:52:047 -> [UART, PM25] Data not available.
19:51:52:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:047 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:047 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:067 -> [UART, PM25] Reading data...
19:51:52:068 -> [UART, PM25] Data not available.
19:51:52:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:068 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:068 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:089 -> [UART, PM25] Reading data...
19:51:52:089 -> [UART, PM25] Data not available.
19:51:52:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:089 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:089 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:110 -> [UART, PM25] Reading data...
19:51:52:110 -> [UART, PM25] Data not available.
19:51:52:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:110 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:110 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:110 -> PING!
19:51:52:324 -> [UART, PM25] Reading data...
19:51:52:324 -> [UART, PM25] Data not available.
19:51:52:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:324 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:324 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:345 -> [UART, PM25] Reading data...
19:51:52:345 -> [UART, PM25] Data not available.
19:51:52:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:345 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:345 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:365 -> [UART, PM25] Reading data...
19:51:52:366 -> [UART, PM25] Data not available.
19:51:52:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:366 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:366 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:386 -> [UART, PM25] Reading data...
19:51:52:387 -> [UART, PM25] Data not available.
19:51:52:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:387 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:387 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:408 -> [UART, PM25] Reading data...
19:51:52:408 -> [UART, PM25] Data not available.
19:51:52:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:408 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:408 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:428 -> [UART, PM25] Reading data...
19:51:52:429 -> [UART, PM25] Data not available.
19:51:52:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:429 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:429 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:449 -> [UART, PM25] Reading data...
19:51:52:454 -> [UART, PM25] Data not available.
19:51:52:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:454 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:454 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:470 -> [UART, PM25] Reading data...
19:51:52:471 -> [UART, PM25] Data not available.
19:51:52:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:471 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:471 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:491 -> [UART, PM25] Reading data...
19:51:52:492 -> [UART, PM25] Data not available.
19:51:52:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:492 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:492 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:513 -> [UART, PM25] Reading data...
19:51:52:513 -> [UART, PM25] Data not available.
19:51:52:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:513 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:513 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:533 -> [UART, PM25] Reading data...
19:51:52:534 -> [UART, PM25] Data not available.
19:51:52:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:534 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:534 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:555 -> [UART, PM25] Reading data...
19:51:52:555 -> [UART, PM25] Data not available.
19:51:52:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:555 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:555 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:576 -> [UART, PM25] Reading data...
19:51:52:576 -> [UART, PM25] Data not available.
19:51:52:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:576 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:576 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:597 -> [UART, PM25] Reading data...
19:51:52:597 -> [UART, PM25] Data not available.
19:51:52:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:597 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:597 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:618 -> [UART, PM25] Reading data...
19:51:52:618 -> [UART, PM25] Data not available.
19:51:52:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:618 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:618 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:639 -> [UART, PM25] Reading data...
19:51:52:639 -> [UART, PM25] Data not available.
19:51:52:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:639 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:639 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:660 -> [UART, PM25] Reading data...
19:51:52:660 -> [UART, PM25] Data not available.
19:51:52:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:660 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:660 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:681 -> [UART, PM25] Reading data...
19:51:52:681 -> [UART, PM25] Data not available.
19:51:52:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:681 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:681 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:702 -> [UART, PM25] Reading data...
19:51:52:702 -> [UART, PM25] Data not available.
19:51:52:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:702 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:702 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:738 -> [UART, PM25] Reading data...
19:51:52:739 -> [UART, PM25] Data not available.
19:51:52:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:739 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:739 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:744 -> [UART, PM25] Reading data...
19:51:52:744 -> [UART, PM25] Data not available.
19:51:52:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:744 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:744 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:764 -> [UART, PM25] Reading data...
19:51:52:765 -> [UART, PM25] Data not available.
19:51:52:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:765 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:765 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:786 -> [UART, PM25] Reading data...
19:51:52:786 -> [UART, PM25] Data not available.
19:51:52:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:786 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:786 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:807 -> [UART, PM25] Reading data...
19:51:52:807 -> [UART, PM25] Data not available.
19:51:52:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:807 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:807 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:828 -> [UART, PM25] Reading data...
19:51:52:829 -> [UART, PM25] Data not available.
19:51:52:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:829 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:829 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:849 -> [UART, PM25] Reading data...
19:51:52:849 -> [UART, PM25] Data not available.
19:51:52:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:849 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:849 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:870 -> [UART, PM25] Reading data...
19:51:52:870 -> [UART, PM25] Data not available.
19:51:52:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:870 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:870 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:891 -> [UART, PM25] Reading data...
19:51:52:891 -> [UART, PM25] Data not available.
19:51:52:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:891 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:891 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:912 -> [UART, PM25] Reading data...
19:51:52:912 -> [UART, PM25] Data not available.
19:51:52:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:912 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:912 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:932 -> [UART, PM25] Reading data...
19:51:52:933 -> [UART, PM25] Data not available.
19:51:52:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:933 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:933 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:953 -> [UART, PM25] Reading data...
19:51:52:954 -> [UART, PM25] Data not available.
19:51:52:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:954 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:954 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:975 -> [UART, PM25] Reading data...
19:51:52:975 -> [UART, PM25] Data not available.
19:51:52:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:975 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:975 -> [UART, PM25] Uart available, resetting event queue..
19:51:52:995 -> [UART, PM25] Reading data...
19:51:52:996 -> [UART, PM25] Data not available.
19:51:52:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:52:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:52:996 -> [UART, PM25] Uart available, clearing write errors..
19:51:52:996 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:017 -> [UART, PM25] Reading data...
19:51:53:017 -> [UART, PM25] Data not available.
19:51:53:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:017 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:017 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:038 -> [UART, PM25] Reading data...
19:51:53:038 -> [UART, PM25] Data not available.
19:51:53:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:038 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:038 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:059 -> [UART, PM25] Reading data...
19:51:53:059 -> [UART, PM25] Data not available.
19:51:53:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:059 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:059 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:083 -> [UART, PM25] Reading data...
19:51:53:084 -> [UART, PM25] Data not available.
19:51:53:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:084 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:084 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:101 -> [UART, PM25] Reading data...
19:51:53:101 -> [UART, PM25] Data not available.
19:51:53:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:101 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:101 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:122 -> [UART, PM25] Reading data...
19:51:53:122 -> [UART, PM25] Data not available.
19:51:53:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:122 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:122 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:143 -> [UART, PM25] Reading data...
19:51:53:143 -> [UART, PM25] Data not available.
19:51:53:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:143 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:143 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:163 -> [UART, PM25] Reading data...
19:51:53:164 -> [UART, PM25] Data not available.
19:51:53:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:164 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:164 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:185 -> [UART, PM25] Reading data...
19:51:53:185 -> [UART, PM25] Data not available.
19:51:53:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:185 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:185 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:205 -> [UART, PM25] Reading data...
19:51:53:206 -> [UART, PM25] Data not available.
19:51:53:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:206 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:206 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:227 -> [UART, PM25] Reading data...
19:51:53:227 -> [UART, PM25] Data not available.
19:51:53:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:227 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:227 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:258 -> [UART, PM25] Reading data...
19:51:53:259 -> [UART, PM25] Data not available.
19:51:53:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:259 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:259 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:268 -> [UART, PM25] Reading data...
19:51:53:269 -> [UART, PM25] Data not available.
19:51:53:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:269 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:269 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:289 -> [UART, PM25] Reading data...
19:51:53:290 -> [UART, PM25] Data not available.
19:51:53:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:290 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:290 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:311 -> [UART, PM25] Reading data...
19:51:53:311 -> [UART, PM25] Data not available.
19:51:53:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:311 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:311 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:332 -> [UART, PM25] Reading data...
19:51:53:332 -> [UART, PM25] Data not available.
19:51:53:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:332 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:332 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:353 -> [UART, PM25] Reading data...
19:51:53:353 -> [UART, PM25] Data not available.
19:51:53:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:353 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:353 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:374 -> [UART, PM25] Reading data...
19:51:53:374 -> [UART, PM25] Data not available.
19:51:53:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:374 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:374 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:394 -> [UART, PM25] Reading data...
19:51:53:395 -> [UART, PM25] Data not available.
19:51:53:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:395 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:395 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:416 -> [UART, PM25] Reading data...
19:51:53:416 -> [UART, PM25] Data not available.
19:51:53:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:416 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:416 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:437 -> [UART, PM25] Reading data...
19:51:53:437 -> [UART, PM25] Data not available.
19:51:53:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:437 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:437 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:457 -> [UART, PM25] Reading data...
19:51:53:458 -> [UART, PM25] Data not available.
19:51:53:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:458 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:458 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:478 -> [UART, PM25] Reading data...
19:51:53:479 -> [UART, PM25] Data not available.
19:51:53:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:479 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:479 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:499 -> [UART, PM25] Reading data...
19:51:53:500 -> [UART, PM25] Data not available.
19:51:53:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:500 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:500 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:521 -> [UART, PM25] Reading data...
19:51:53:521 -> [UART, PM25] Data not available.
19:51:53:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:521 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:521 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:542 -> [UART, PM25] Reading data...
19:51:53:542 -> [UART, PM25] Data not available.
19:51:53:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:542 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:542 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:562 -> [UART, PM25] Reading data...
19:51:53:563 -> [UART, PM25] Data not available.
19:51:53:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:563 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:563 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:583 -> [UART, PM25] Reading data...
19:51:53:584 -> [UART, PM25] Data not available.
19:51:53:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:584 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:584 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:604 -> [UART, PM25] Reading data...
19:51:53:605 -> [UART, PM25] Data not available.
19:51:53:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:605 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:605 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:626 -> [UART, PM25] Reading data...
19:51:53:626 -> [UART, PM25] Data not available.
19:51:53:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:626 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:626 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:647 -> [UART, PM25] Reading data...
19:51:53:647 -> [UART, PM25] Data not available.
19:51:53:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:647 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:647 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:668 -> [UART, PM25] Reading data...
19:51:53:669 -> [UART, PM25] Data not available.
19:51:53:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:669 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:669 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:689 -> [UART, PM25] Reading data...
19:51:53:689 -> [UART, PM25] Data not available.
19:51:53:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:689 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:689 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:709 -> [UART, PM25] Reading data...
19:51:53:710 -> [UART, PM25] Data not available.
19:51:53:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:710 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:710 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:731 -> [UART, PM25] Reading data...
19:51:53:731 -> [UART, PM25] Data not available.
19:51:53:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:731 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:731 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:752 -> [UART, PM25] Reading data...
19:51:53:752 -> [UART, PM25] Data not available.
19:51:53:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:752 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:752 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:783 -> [UART, PM25] Reading data...
19:51:53:784 -> [UART, PM25] Data not available.
19:51:53:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:784 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:784 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:794 -> [UART, PM25] Reading data...
19:51:53:794 -> [UART, PM25] Data not available.
19:51:53:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:794 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:794 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:814 -> [UART, PM25] Reading data...
19:51:53:815 -> [UART, PM25] Data not available.
19:51:53:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:815 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:815 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:836 -> [UART, PM25] Reading data...
19:51:53:836 -> [UART, PM25] Data not available.
19:51:53:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:836 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:836 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:856 -> [UART, PM25] Reading data...
19:51:53:857 -> [UART, PM25] Data not available.
19:51:53:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:857 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:857 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:877 -> [UART, PM25] Reading data...
19:51:53:878 -> [UART, PM25] Data not available.
19:51:53:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:878 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:878 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:899 -> [UART, PM25] Reading data...
19:51:53:899 -> [UART, PM25] Data not available.
19:51:53:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:899 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:899 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:920 -> [UART, PM25] Reading data...
19:51:53:920 -> [UART, PM25] Data not available.
19:51:53:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:920 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:920 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:941 -> [UART, PM25] Reading data...
19:51:53:941 -> [UART, PM25] Data not available.
19:51:53:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:941 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:941 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:962 -> [UART, PM25] Reading data...
19:51:53:962 -> [UART, PM25] Data not available.
19:51:53:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:962 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:962 -> [UART, PM25] Uart available, resetting event queue..
19:51:53:982 -> [UART, PM25] Reading data...
19:51:53:983 -> [UART, PM25] Data not available.
19:51:53:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:53:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:53:983 -> [UART, PM25] Uart available, clearing write errors..
19:51:53:983 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:004 -> [UART, PM25] Reading data...
19:51:54:004 -> [UART, PM25] Data not available.
19:51:54:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:004 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:004 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:037 -> [UART, PM25] Reading data...
19:51:54:038 -> [UART, PM25] Data not available.
19:51:54:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:038 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:038 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:057 -> [UART, PM25] Reading data...
19:51:54:057 -> [UART, PM25] Data not available.
19:51:54:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:057 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:057 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:066 -> [UART, PM25] Reading data...
19:51:54:067 -> [UART, PM25] Data not available.
19:51:54:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:067 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:067 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:088 -> [UART, PM25] Reading data...
19:51:54:088 -> [UART, PM25] Data not available.
19:51:54:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:088 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:088 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:108 -> [UART, PM25] Reading data...
19:51:54:109 -> [UART, PM25] Data not available.
19:51:54:109 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:109 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:109 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:109 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:129 -> [UART, PM25] Reading data...
19:51:54:130 -> [UART, PM25] Data not available.
19:51:54:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:130 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:130 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:150 -> [UART, PM25] Reading data...
19:51:54:151 -> [UART, PM25] Data not available.
19:51:54:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:151 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:151 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:171 -> [UART, PM25] Reading data...
19:51:54:172 -> [UART, PM25] Data not available.
19:51:54:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:172 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:172 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:192 -> [UART, PM25] Reading data...
19:51:54:193 -> [UART, PM25] Data not available.
19:51:54:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:193 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:193 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:213 -> [UART, PM25] Reading data...
19:51:54:214 -> [UART, PM25] Data not available.
19:51:54:214 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:214 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:214 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:214 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:237 -> [UART, PM25] Reading data...
19:51:54:238 -> [UART, PM25] Data not available.
19:51:54:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:238 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:238 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:256 -> [UART, PM25] Reading data...
19:51:54:256 -> [UART, PM25] Data not available.
19:51:54:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:256 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:256 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:277 -> [UART, PM25] Reading data...
19:51:54:277 -> [UART, PM25] Data not available.
19:51:54:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:277 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:277 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:299 -> [UART, PM25] Reading data...
19:51:54:300 -> [UART, PM25] Data not available.
19:51:54:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:300 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:300 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:319 -> [UART, PM25] Reading data...
19:51:54:319 -> [UART, PM25] Data not available.
19:51:54:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:319 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:319 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:340 -> [UART, PM25] Reading data...
19:51:54:340 -> [UART, PM25] Data not available.
19:51:54:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:340 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:340 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:361 -> [UART, PM25] Reading data...
19:51:54:361 -> [UART, PM25] Data not available.
19:51:54:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:361 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:361 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:382 -> [UART, PM25] Reading data...
19:51:54:382 -> [UART, PM25] Data not available.
19:51:54:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:382 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:382 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:402 -> [UART, PM25] Reading data...
19:51:54:403 -> [UART, PM25] Data not available.
19:51:54:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:403 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:403 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:423 -> [UART, PM25] Reading data...
19:51:54:424 -> [UART, PM25] Data not available.
19:51:54:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:424 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:424 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:445 -> [UART, PM25] Reading data...
19:51:54:445 -> [UART, PM25] Data not available.
19:51:54:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:445 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:445 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:466 -> [UART, PM25] Reading data...
19:51:54:466 -> [UART, PM25] Data not available.
19:51:54:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:466 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:466 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:487 -> [UART, PM25] Reading data...
19:51:54:487 -> [UART, PM25] Data not available.
19:51:54:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:487 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:487 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:507 -> [UART, PM25] Reading data...
19:51:54:508 -> [UART, PM25] Data not available.
19:51:54:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:508 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:508 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:528 -> [UART, PM25] Reading data...
19:51:54:529 -> [UART, PM25] Data not available.
19:51:54:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:529 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:529 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:550 -> [UART, PM25] Reading data...
19:51:54:550 -> [UART, PM25] Data not available.
19:51:54:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:550 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:550 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:571 -> [UART, PM25] Reading data...
19:51:54:571 -> [UART, PM25] Data not available.
19:51:54:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:571 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:571 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:591 -> [UART, PM25] Reading data...
19:51:54:592 -> [UART, PM25] Data not available.
19:51:54:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:592 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:592 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:613 -> [UART, PM25] Reading data...
19:51:54:613 -> [UART, PM25] Data not available.
19:51:54:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:613 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:613 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:634 -> [UART, PM25] Reading data...
19:51:54:634 -> [UART, PM25] Data not available.
19:51:54:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:634 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:634 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:655 -> [UART, PM25] Reading data...
19:51:54:655 -> [UART, PM25] Data not available.
19:51:54:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:655 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:655 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:676 -> [UART, PM25] Reading data...
19:51:54:676 -> [UART, PM25] Data not available.
19:51:54:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:676 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:676 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:697 -> [UART, PM25] Reading data...
19:51:54:697 -> [UART, PM25] Data not available.
19:51:54:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:697 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:697 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:717 -> [UART, PM25] Reading data...
19:51:54:718 -> [UART, PM25] Data not available.
19:51:54:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:718 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:718 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:739 -> [UART, PM25] Reading data...
19:51:54:739 -> [UART, PM25] Data not available.
19:51:54:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:739 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:739 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:760 -> [UART, PM25] Reading data...
19:51:54:760 -> [UART, PM25] Data not available.
19:51:54:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:760 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:760 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:781 -> [UART, PM25] Reading data...
19:51:54:781 -> [UART, PM25] Data not available.
19:51:54:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:781 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:781 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:813 -> [UART, PM25] Reading data...
19:51:54:814 -> [UART, PM25] Data not available.
19:51:54:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:814 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:814 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:823 -> [UART, PM25] Reading data...
19:51:54:823 -> [UART, PM25] Data not available.
19:51:54:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:823 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:823 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:844 -> [UART, PM25] Reading data...
19:51:54:844 -> [UART, PM25] Data not available.
19:51:54:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:844 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:844 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:865 -> [UART, PM25] Reading data...
19:51:54:865 -> [UART, PM25] Data not available.
19:51:54:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:865 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:865 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:885 -> [UART, PM25] Reading data...
19:51:54:886 -> [UART, PM25] Data not available.
19:51:54:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:886 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:886 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:906 -> [UART, PM25] Reading data...
19:51:54:907 -> [UART, PM25] Data not available.
19:51:54:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:907 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:907 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:927 -> [UART, PM25] Reading data...
19:51:54:928 -> [UART, PM25] Data not available.
19:51:54:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:928 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:928 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:948 -> [UART, PM25] Reading data...
19:51:54:949 -> [UART, PM25] Data not available.
19:51:54:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:949 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:949 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:970 -> [UART, PM25] Reading data...
19:51:54:971 -> [UART, PM25] Data not available.
19:51:54:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:971 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:971 -> [UART, PM25] Uart available, resetting event queue..
19:51:54:990 -> [UART, PM25] Reading data...
19:51:54:991 -> [UART, PM25] Data not available.
19:51:54:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:54:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:54:991 -> [UART, PM25] Uart available, clearing write errors..
19:51:54:991 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:012 -> [UART, PM25] Reading data...
19:51:55:012 -> [UART, PM25] Data not available.
19:51:55:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:012 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:012 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:032 -> [UART, PM25] Reading data...19:51:55:054 -> [UART, PM25] Reading data...
19:51:55:054 -> [UART, PM25] Data not available.
19:51:55:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:054 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:054 -> [UART, PM25] Uart available, resetting event queue..

19:51:55:033 -> [UART, PM25] Data not available.
19:51:55:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:033 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:033 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:074 -> [UART, PM25] Reading data...
19:51:55:075 -> [UART, PM25] Data not available.
19:51:55:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:075 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:075 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:096 -> [UART, PM25] Reading data...
19:51:55:096 -> [UART, PM25] Data not available.
19:51:55:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:096 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:096 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:116 -> [UART, PM25] Reading data...
19:51:55:118 -> [UART, PM25] Data not available.
19:51:55:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:118 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:118 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:137 -> [UART, PM25] Reading data...
19:51:55:138 -> [UART, PM25] Data not available.
19:51:55:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:138 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:138 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:159 -> [UART, PM25] Reading data...
19:51:55:159 -> [UART, PM25] Data not available.
19:51:55:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:159 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:159 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:180 -> [UART, PM25] Reading data...
19:51:55:180 -> [UART, PM25] Data not available.
19:51:55:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:180 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:180 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:201 -> [UART, PM25] Reading data...
19:51:55:201 -> [UART, PM25] Data not available.
19:51:55:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:201 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:201 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:221 -> [UART, PM25] Reading data...
19:51:55:222 -> [UART, PM25] Data not available.
19:51:55:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:222 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:222 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:242 -> [UART, PM25] Reading data...
19:51:55:243 -> [UART, PM25] Data not available.
19:51:55:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:243 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:243 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:264 -> [UART, PM25] Reading data...
19:51:55:264 -> [UART, PM25] Data not available.
19:51:55:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:264 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:264 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:284 -> [UART, PM25] Reading data...
19:51:55:285 -> [UART, PM25] Data not available.
19:51:55:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:285 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:285 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:305 -> [UART, PM25] Reading data...
19:51:55:306 -> [UART, PM25] Data not available.
19:51:55:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:306 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:306 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:328 -> [UART, PM25] Reading data...
19:51:55:329 -> [UART, PM25] Data not available.
19:51:55:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:329 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:329 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:347 -> [UART, PM25] Reading data...
19:51:55:348 -> [UART, PM25] Data not available.
19:51:55:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:348 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:348 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:369 -> [UART, PM25] Reading data...
19:51:55:369 -> [UART, PM25] Data not available.
19:51:55:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:369 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:369 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:389 -> [UART, PM25] Reading data...
19:51:55:390 -> [UART, PM25] Data not available.
19:51:55:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:390 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:390 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:410 -> [UART, PM25] Reading data...
19:51:55:411 -> [UART, PM25] Data not available.
19:51:55:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:411 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:411 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:431 -> [UART, PM25] Reading data...
19:51:55:432 -> [UART, PM25] Data not available.
19:51:55:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:432 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:432 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:453 -> [UART, PM25] Reading data...
19:51:55:453 -> [UART, PM25] Data not available.
19:51:55:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:453 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:453 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:474 -> [UART, PM25] Reading data...
19:51:55:474 -> [UART, PM25] Data not available.
19:51:55:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:474 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:474 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:494 -> [UART, PM25] Reading data...
19:51:55:495 -> [UART, PM25] Data not available.
19:51:55:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:495 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:495 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:515 -> [UART, PM25] Reading data...
19:51:55:516 -> [UART, PM25] Data not available.
19:51:55:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:516 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:516 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:536 -> [UART, PM25] Reading data...
19:51:55:537 -> [UART, PM25] Data not available.
19:51:55:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:537 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:537 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:569 -> [UART, PM25] Reading data...
19:51:55:580 -> [UART, PM25] Data not available.
19:51:55:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:580 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:580 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:580 -> [UART, PM25] Reading data...
19:51:55:580 -> [UART, PM25] Data not available.
19:51:55:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:595 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:595 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:599 -> [UART, PM25] Reading data...
19:51:55:600 -> [UART, PM25] Data not available.
19:51:55:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:600 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:600 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:620 -> [UART, PM25] Reading data...
19:51:55:621 -> [UART, PM25] Data not available.
19:51:55:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:621 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:621 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:641 -> [UART, PM25] Reading data...
19:51:55:642 -> [UART, PM25] Data not available.
19:51:55:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:642 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:642 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:662 -> [UART, PM25] Reading data...
19:51:55:663 -> [UART, PM25] Data not available.
19:51:55:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:663 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:663 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:686 -> [UART, PM25] Reading data...
19:51:55:687 -> [UART, PM25] Data not available.
19:51:55:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:687 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:687 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:705 -> [UART, PM25] Reading data...
19:51:55:705 -> [UART, PM25] Data not available.
19:51:55:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:705 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:705 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:725 -> [UART, PM25] Reading data...
19:51:55:726 -> [UART, PM25] Data not available.
19:51:55:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:726 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:726 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:747 -> [UART, PM25] Reading data...
19:51:55:747 -> [UART, PM25] Data not available.
19:51:55:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:747 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:747 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:768 -> [UART, PM25] Reading data...
19:51:55:768 -> [UART, PM25] Data not available.
19:51:55:768 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:768 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:768 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:768 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:789 -> [UART, PM25] Reading data...
19:51:55:789 -> [UART, PM25] Data not available.
19:51:55:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:789 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:789 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:809 -> [UART, PM25] Reading data...
19:51:55:810 -> [UART, PM25] Data not available.
19:51:55:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:810 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:810 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:844 -> [UART, PM25] Reading data...
19:51:55:845 -> [UART, PM25] Data not available.
19:51:55:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:845 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:845 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:852 -> [UART, PM25] Reading data...
19:51:55:852 -> [UART, PM25] Data not available.
19:51:55:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:852 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:852 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:873 -> [UART, PM25] Reading data...
19:51:55:873 -> [UART, PM25] Data not available.
19:51:55:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:873 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:873 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:894 -> [UART, PM25] Reading data...
19:51:55:894 -> [UART, PM25] Data not available.
19:51:55:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:894 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:894 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:914 -> [UART, PM25] Reading data...
19:51:55:915 -> [UART, PM25] Data not available.
19:51:55:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:915 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:915 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:936 -> [UART, PM25] Reading data...
19:51:55:936 -> [UART, PM25] Data not available.
19:51:55:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:936 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:936 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:957 -> [UART, PM25] Reading data...
19:51:55:957 -> [UART, PM25] Data not available.
19:51:55:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:957 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:957 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:977 -> [UART, PM25] Reading data...
19:51:55:978 -> [UART, PM25] Data not available.
19:51:55:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:978 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:978 -> [UART, PM25] Uart available, resetting event queue..
19:51:55:999 -> [UART, PM25] Reading data...
19:51:55:999 -> [UART, PM25] Data not available.
19:51:55:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:55:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:55:999 -> [UART, PM25] Uart available, clearing write errors..
19:51:55:999 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:020 -> [UART, PM25] Reading data...
19:51:56:020 -> [UART, PM25] Data not available.
19:51:56:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:020 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:020 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:040 -> [UART, PM25] Reading data...
19:51:56:041 -> [UART, PM25] Data not available.
19:51:56:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:041 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:041 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:061 -> [UART, PM25] Reading data...
19:51:56:062 -> [UART, PM25] Data not available.
19:51:56:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:062 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:062 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:083 -> [UART, PM25] Reading data...
19:51:56:083 -> [UART, PM25] Data not available.
19:51:56:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:083 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:083 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:104 -> [UART, PM25] Reading data...
19:51:56:104 -> [UART, PM25] Data not available.
19:51:56:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:104 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:104 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:124 -> [UART, PM25] Reading data...
19:51:56:125 -> [UART, PM25] Data not available.
19:51:56:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:125 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:125 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:146 -> [UART, PM25] Reading data...
19:51:56:146 -> [UART, PM25] Data not available.
19:51:56:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:146 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:146 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:167 -> [UART, PM25] Reading data...
19:51:56:167 -> [UART, PM25] Data not available.
19:51:56:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:167 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:167 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:188 -> [UART, PM25] Reading data...
19:51:56:188 -> [UART, PM25] Data not available.
19:51:56:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:188 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:188 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:208 -> [UART, PM25] Reading data...
19:51:56:209 -> [UART, PM25] Data not available.
19:51:56:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:209 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:209 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:229 -> [UART, PM25] Reading data...
19:51:56:230 -> [UART, PM25] Data not available.
19:51:56:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:230 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:230 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:250 -> [UART, PM25] Reading data...
19:51:56:251 -> [UART, PM25] Data not available.
19:51:56:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:251 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:251 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:272 -> [UART, PM25] Reading data...
19:51:56:272 -> [UART, PM25] Data not available.
19:51:56:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:272 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:272 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:293 -> [UART, PM25] Reading data...
19:51:56:293 -> [UART, PM25] Data not available.
19:51:56:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:293 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:293 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:313 -> [UART, PM25] Reading data...
19:51:56:314 -> [UART, PM25] Data not available.
19:51:56:314 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:314 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:314 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:314 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:335 -> [UART, PM25] Reading data...
19:51:56:335 -> [UART, PM25] Data not available.
19:51:56:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:335 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:335 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:365 -> [UART, PM25] Reading data...
19:51:56:365 -> [UART, PM25] Data not available.
19:51:56:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:365 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:365 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:376 -> [UART, PM25] Reading data...
19:51:56:377 -> [UART, PM25] Data not available.
19:51:56:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:377 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:377 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:398 -> [UART, PM25] Reading data...
19:51:56:398 -> [UART, PM25] Data not available.
19:51:56:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:398 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:398 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:419 -> [UART, PM25] Reading data...
19:51:56:419 -> [UART, PM25] Data not available.
19:51:56:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:419 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:419 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:439 -> [UART, PM25] Reading data...
19:51:56:440 -> [UART, PM25] Data not available.
19:51:56:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:440 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:440 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:460 -> [UART, PM25] Reading data...
19:51:56:461 -> [UART, PM25] Data not available.
19:51:56:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:461 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:461 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:482 -> [UART, PM25] Reading data...
19:51:56:482 -> [UART, PM25] Data not available.
19:51:56:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:482 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:482 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:503 -> [UART, PM25] Reading data...
19:51:56:503 -> [UART, PM25] Data not available.
19:51:56:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:503 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:503 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:523 -> [UART, PM25] Reading data...
19:51:56:524 -> [UART, PM25] Data not available.
19:51:56:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:524 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:524 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:545 -> [UART, PM25] Reading data...
19:51:56:545 -> [UART, PM25] Data not available.
19:51:56:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:545 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:545 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:565 -> [UART, PM25] Reading data...
19:51:56:566 -> [UART, PM25] Data not available.
19:51:56:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:566 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:566 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:587 -> [UART, PM25] Reading data...
19:51:56:588 -> [UART, PM25] Data not available.
19:51:56:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:588 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:588 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:608 -> [UART, PM25] Reading data...
19:51:56:608 -> [UART, PM25] Data not available.
19:51:56:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:608 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:608 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:629 -> [UART, PM25] Reading data...
19:51:56:629 -> [UART, PM25] Data not available.
19:51:56:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:629 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:629 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:650 -> [UART, PM25] Reading data...
19:51:56:650 -> [UART, PM25] Data not available.
19:51:56:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:650 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:650 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:671 -> [UART, PM25] Reading data...
19:51:56:671 -> [UART, PM25] Data not available.
19:51:56:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:671 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:671 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:691 -> [UART, PM25] Reading data...
19:51:56:692 -> [UART, PM25] Data not available.
19:51:56:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:692 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:692 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:713 -> [UART, PM25] Reading data...
19:51:56:713 -> [UART, PM25] Data not available.
19:51:56:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:713 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:713 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:734 -> [UART, PM25] Reading data...
19:51:56:734 -> [UART, PM25] Data not available.
19:51:56:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:734 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:734 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:754 -> [UART, PM25] Reading data...
19:51:56:755 -> [UART, PM25] Data not available.
19:51:56:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:755 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:755 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:775 -> [UART, PM25] Reading data...
19:51:56:776 -> [UART, PM25] Data not available.
19:51:56:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:776 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:776 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:797 -> [UART, PM25] Reading data...
19:51:56:797 -> [UART, PM25] Data not available.
19:51:56:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:797 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:797 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:818 -> [UART, PM25] Reading data...
19:51:56:818 -> [UART, PM25] Data not available.
19:51:56:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:56:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:56:818 -> [UART, PM25] Uart available, clearing write errors..
19:51:56:818 -> [UART, PM25] Uart available, resetting event queue..
19:51:56:818 -> PING!
19:51:57:032 -> [UART, PM25] Reading data...
19:51:57:032 -> [UART, PM25] Data not available.
19:51:57:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:032 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:032 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:052 -> [UART, PM25] Reading data...
19:51:57:053 -> [UART, PM25] Data not available.
19:51:57:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:053 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:053 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:074 -> [UART, PM25] Reading data...
19:51:57:075 -> [UART, PM25] Data not available.
19:51:57:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:075 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:075 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:095 -> [UART, PM25] Reading data...
19:51:57:095 -> [UART, PM25] Data not available.
19:51:57:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:095 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:095 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:115 -> [UART, PM25] Reading data...
19:51:57:116 -> [UART, PM25] Data not available.
19:51:57:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:116 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:116 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:136 -> [UART, PM25] Reading data...
19:51:57:137 -> [UART, PM25] Data not available.
19:51:57:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:137 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:137 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:158 -> [UART, PM25] Reading data...
19:51:57:158 -> [UART, PM25] Data not available.
19:51:57:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:158 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:158 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:178 -> [UART, PM25] Reading data...
19:51:57:179 -> [UART, PM25] Data not available.
19:51:57:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:179 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:179 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:200 -> [UART, PM25] Reading data...
19:51:57:200 -> [UART, PM25] Data not available.
19:51:57:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:200 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:200 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:221 -> [UART, PM25] Reading data...
19:51:57:221 -> [UART, PM25] Data not available.
19:51:57:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:221 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:221 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:242 -> [UART, PM25] Reading data...
19:51:57:242 -> [UART, PM25] Data not available.
19:51:57:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:242 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:242 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:263 -> [UART, PM25] Reading data...
19:51:57:264 -> [UART, PM25] Data not available.
19:51:57:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:264 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:264 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:284 -> [UART, PM25] Reading data...
19:51:57:284 -> [UART, PM25] Data not available.
19:51:57:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:284 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:284 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:304 -> [UART, PM25] Reading data...
19:51:57:305 -> [UART, PM25] Data not available.
19:51:57:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:305 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:305 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:325 -> [UART, PM25] Reading data...
19:51:57:326 -> [UART, PM25] Data not available.
19:51:57:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:326 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:326 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:347 -> [UART, PM25] Reading data...
19:51:57:347 -> [UART, PM25] Data not available.
19:51:57:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:347 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:347 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:367 -> [UART, PM25] Reading data...
19:51:57:368 -> [UART, PM25] Data not available.
19:51:57:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:368 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:368 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:404 -> [UART, PM25] Reading data...
19:51:57:404 -> [UART, PM25] Data not available.
19:51:57:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:404 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:404 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:410 -> [UART, PM25] Reading data...
19:51:57:410 -> [UART, PM25] Data not available.
19:51:57:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:410 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:410 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:431 -> [UART, PM25] Reading data...
19:51:57:431 -> [UART, PM25] Data not available.
19:51:57:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:431 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:431 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:452 -> [UART, PM25] Reading data...
19:51:57:452 -> [UART, PM25] Data not available.
19:51:57:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:452 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:452 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:472 -> [UART, PM25] Reading data...
19:51:57:473 -> [UART, PM25] Data not available.
19:51:57:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:473 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:473 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:493 -> [UART, PM25] Reading data...
19:51:57:494 -> [UART, PM25] Data not available.
19:51:57:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:494 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:494 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:514 -> [UART, PM25] Reading data...
19:51:57:515 -> [UART, PM25] Data not available.
19:51:57:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:515 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:515 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:536 -> [UART, PM25] Reading data...
19:51:57:536 -> [UART, PM25] Data not available.
19:51:57:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:536 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:536 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:558 -> [UART, PM25] Reading data...
19:51:57:559 -> [UART, PM25] Data not available.
19:51:57:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:559 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:559 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:586 -> [UART, PM25] Reading data...
19:51:57:590 -> [UART, PM25] Data not available.
19:51:57:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:590 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:590 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:600 -> [UART, PM25] Reading data...
19:51:57:600 -> [UART, PM25] Data not available.
19:51:57:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:600 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:600 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:619 -> [UART, PM25] Reading data...
19:51:57:620 -> [UART, PM25] Data not available.
19:51:57:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:620 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:620 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:640 -> [UART, PM25] Reading data...
19:51:57:641 -> [UART, PM25] Data not available.
19:51:57:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:641 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:641 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:662 -> [UART, PM25] Reading data...
19:51:57:662 -> [UART, PM25] Data not available.
19:51:57:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:662 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:662 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:682 -> [UART, PM25] Reading data...
19:51:57:683 -> [UART, PM25] Data not available.
19:51:57:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:683 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:683 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:703 -> [UART, PM25] Reading data...
19:51:57:704 -> [UART, PM25] Data not available.
19:51:57:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:704 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:704 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:725 -> [UART, PM25] Reading data...
19:51:57:725 -> [UART, PM25] Data not available.
19:51:57:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:725 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:725 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:746 -> [UART, PM25] Reading data...
19:51:57:746 -> [UART, PM25] Data not available.
19:51:57:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:747 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:747 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:767 -> [UART, PM25] Reading data...
19:51:57:767 -> [UART, PM25] Data not available.
19:51:57:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:767 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:767 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:788 -> [UART, PM25] Reading data...
19:51:57:788 -> [UART, PM25] Data not available.
19:51:57:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:788 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:788 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:808 -> [UART, PM25] Reading data...
19:51:57:809 -> [UART, PM25] Data not available.
19:51:57:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:809 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:809 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:830 -> [UART, PM25] Reading data...
19:51:57:830 -> [UART, PM25] Data not available.
19:51:57:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:830 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:830 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:851 -> [UART, PM25] Reading data...
19:51:57:851 -> [UART, PM25] Data not available.
19:51:57:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:851 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:851 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:871 -> [UART, PM25] Reading data...
19:51:57:872 -> [UART, PM25] Data not available.
19:51:57:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:872 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:872 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:892 -> [UART, PM25] Reading data...
19:51:57:893 -> [UART, PM25] Data not available.
19:51:57:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:893 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:893 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:925 -> [UART, PM25] Reading data...
19:51:57:925 -> [UART, PM25] Data not available.
19:51:57:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:925 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:925 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:935 -> [UART, PM25] Reading data...
19:51:57:935 -> [UART, PM25] Data not available.
19:51:57:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:935 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:935 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:956 -> [UART, PM25] Reading data...
19:51:57:956 -> [UART, PM25] Data not available.
19:51:57:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:956 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:956 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:976 -> [UART, PM25] Reading data...
19:51:57:977 -> [UART, PM25] Data not available.
19:51:57:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:977 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:977 -> [UART, PM25] Uart available, resetting event queue..
19:51:57:997 -> [UART, PM25] Reading data...
19:51:57:998 -> [UART, PM25] Data not available.
19:51:57:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:57:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:57:998 -> [UART, PM25] Uart available, clearing write errors..
19:51:57:998 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:018 -> [UART, PM25] Reading data...
19:51:58:019 -> [UART, PM25] Data not available.
19:51:58:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:019 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:019 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:040 -> [UART, PM25] Reading data...
19:51:58:040 -> [UART, PM25] Data not available.
19:51:58:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:040 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:040 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:060 -> [UART, PM25] Reading data...
19:51:58:061 -> [UART, PM25] Data not available.
19:51:58:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:061 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:061 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:081 -> [UART, PM25] Reading data...
19:51:58:082 -> [UART, PM25] Data not available.
19:51:58:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:082 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:082 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:102 -> [UART, PM25] Reading data...
19:51:58:103 -> [UART, PM25] Data not available.
19:51:58:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:103 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:103 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:123 -> [UART, PM25] Reading data...
19:51:58:124 -> [UART, PM25] Data not available.
19:51:58:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:124 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:124 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:145 -> [UART, PM25] Reading data...
19:51:58:145 -> [UART, PM25] Data not available.
19:51:58:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:145 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:145 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:166 -> [UART, PM25] Reading data...
19:51:58:166 -> [UART, PM25] Data not available.
19:51:58:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:166 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:166 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:186 -> [UART, PM25] Reading data...
19:51:58:187 -> [UART, PM25] Data not available.
19:51:58:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:187 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:187 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:207 -> [UART, PM25] Reading data...
19:51:58:208 -> [UART, PM25] Data not available.
19:51:58:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:208 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:208 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:228 -> [UART, PM25] Reading data...
19:51:58:229 -> [UART, PM25] Data not available.
19:51:58:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:229 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:229 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:249 -> [UART, PM25] Reading data...
19:51:58:250 -> [UART, PM25] Data not available.
19:51:58:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:250 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:250 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:270 -> [UART, PM25] Reading data...
19:51:58:271 -> [UART, PM25] Data not available.
19:51:58:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:271 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:271 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:291 -> [UART, PM25] Reading data...
19:51:58:292 -> [UART, PM25] Data not available.
19:51:58:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:292 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:292 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:312 -> [UART, PM25] Reading data...
19:51:58:313 -> [UART, PM25] Data not available.
19:51:58:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:313 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:313 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:334 -> [UART, PM25] Reading data...
19:51:58:336 -> [UART, PM25] Data not available.
19:51:58:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:336 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:336 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:355 -> [UART, PM25] Reading data...
19:51:58:355 -> [UART, PM25] Data not available.
19:51:58:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:355 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:355 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:376 -> [UART, PM25] Reading data...
19:51:58:376 -> [UART, PM25] Data not available.
19:51:58:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:376 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:376 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:396 -> [UART, PM25] Reading data...
19:51:58:397 -> [UART, PM25] Data not available.
19:51:58:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:397 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:397 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:418 -> [UART, PM25] Reading data...
19:51:58:418 -> [UART, PM25] Data not available.
19:51:58:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:418 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:418 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:447 -> [UART, PM25] Reading data...
19:51:58:448 -> [UART, PM25] Data not available.
19:51:58:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:448 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:448 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:460 -> [UART, PM25] Reading data...
19:51:58:460 -> [UART, PM25] Data not available.
19:51:58:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:460 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:460 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:481 -> [UART, PM25] Reading data...
19:51:58:482 -> [UART, PM25] Data not available.
19:51:58:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:482 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:482 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:502 -> [UART, PM25] Reading data...
19:51:58:502 -> [UART, PM25] Data not available.
19:51:58:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:502 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:502 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:523 -> [UART, PM25] Reading data...
19:51:58:523 -> [UART, PM25] Data not available.
19:51:58:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:523 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:523 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:544 -> [UART, PM25] Reading data...
19:51:58:544 -> [UART, PM25] Data not available.
19:51:58:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:544 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:544 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:565 -> [UART, PM25] Reading data...
19:51:58:565 -> [UART, PM25] Data not available.
19:51:58:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:565 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:565 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:586 -> [UART, PM25] Reading data...
19:51:58:586 -> [UART, PM25] Data not available.
19:51:58:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:586 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:586 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:607 -> [UART, PM25] Reading data...
19:51:58:607 -> [UART, PM25] Data not available.
19:51:58:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:607 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:607 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:628 -> [UART, PM25] Reading data...
19:51:58:628 -> [UART, PM25] Data not available.
19:51:58:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:628 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:628 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:649 -> [UART, PM25] Reading data...
19:51:58:649 -> [UART, PM25] Data not available.
19:51:58:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:649 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:649 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:670 -> [UART, PM25] Reading data...
19:51:58:670 -> [UART, PM25] Data not available.
19:51:58:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:670 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:670 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:690 -> [UART, PM25] Reading data...
19:51:58:691 -> [UART, PM25] Data not available.
19:51:58:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:691 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:691 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:711 -> [UART, PM25] Reading data...
19:51:58:712 -> [UART, PM25] Data not available.
19:51:58:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:712 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:712 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:733 -> [UART, PM25] Reading data...
19:51:58:733 -> [UART, PM25] Data not available.
19:51:58:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:733 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:733 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:754 -> [UART, PM25] Reading data...
19:51:58:754 -> [UART, PM25] Data not available.
19:51:58:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:754 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:754 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:774 -> [UART, PM25] Reading data...
19:51:58:775 -> [UART, PM25] Data not available.
19:51:58:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:775 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:775 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:795 -> [UART, PM25] Reading data...
19:51:58:796 -> [UART, PM25] Data not available.
19:51:58:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:796 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:796 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:816 -> [UART, PM25] Reading data...
19:51:58:817 -> [UART, PM25] Data not available.
19:51:58:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:817 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:817 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:837 -> [UART, PM25] Reading data...
19:51:58:838 -> [UART, PM25] Data not available.
19:51:58:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:838 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:838 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:859 -> [UART, PM25] Reading data...
19:51:58:859 -> [UART, PM25] Data not available.
19:51:58:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:859 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:859 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:880 -> [UART, PM25] Reading data...
19:51:58:880 -> [UART, PM25] Data not available.
19:51:58:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:880 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:880 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:900 -> [UART, PM25] Reading data...
19:51:58:901 -> [UART, PM25] Data not available.
19:51:58:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:901 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:901 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:922 -> [UART, PM25] Reading data...
19:51:58:922 -> [UART, PM25] Data not available.
19:51:58:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:922 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:922 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:942 -> [UART, PM25] Reading data...
19:51:58:943 -> [UART, PM25] Data not available.
19:51:58:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:943 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:943 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:967 -> [UART, PM25] Reading data...
19:51:58:968 -> [UART, PM25] Data not available.
19:51:58:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:968 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:968 -> [UART, PM25] Uart available, resetting event queue..
19:51:58:985 -> [UART, PM25] Reading data...
19:51:58:985 -> [UART, PM25] Data not available.
19:51:58:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:58:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:58:985 -> [UART, PM25] Uart available, clearing write errors..
19:51:58:985 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:005 -> [UART, PM25] Reading data...
19:51:59:006 -> [UART, PM25] Data not available.
19:51:59:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:006 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:006 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:026 -> [UART, PM25] Reading data...
19:51:59:027 -> [UART, PM25] Data not available.
19:51:59:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:027 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:027 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:047 -> [UART, PM25] Reading data...
19:51:59:048 -> [UART, PM25] Data not available.
19:51:59:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:048 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:048 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:068 -> [UART, PM25] Reading data...
19:51:59:069 -> [UART, PM25] Data not available.
19:51:59:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:069 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:069 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:089 -> [UART, PM25] Reading data...
19:51:59:090 -> [UART, PM25] Data not available.
19:51:59:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:090 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:090 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:110 -> [UART, PM25] Reading data...
19:51:59:111 -> [UART, PM25] Data not available.
19:51:59:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:111 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:111 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:131 -> [UART, PM25] Reading data...
19:51:59:131 -> [UART, PM25] Data not available.
19:51:59:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:132 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:132 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:153 -> [UART, PM25] Reading data...
19:51:59:153 -> [UART, PM25] Data not available.
19:51:59:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:153 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:153 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:174 -> [UART, PM25] Reading data...
19:51:59:174 -> [UART, PM25] Data not available.
19:51:59:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:174 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:174 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:194 -> [UART, PM25] Reading data...
19:51:59:195 -> [UART, PM25] Data not available.
19:51:59:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:195 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:195 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:216 -> [UART, PM25] Reading data...
19:51:59:216 -> [UART, PM25] Data not available.
19:51:59:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:216 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:216 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:237 -> [UART, PM25] Reading data...
19:51:59:237 -> [UART, PM25] Data not available.
19:51:59:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:237 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:237 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:258 -> [UART, PM25] Reading data...
19:51:59:258 -> [UART, PM25] Data not available.
19:51:59:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:258 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:258 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:278 -> [UART, PM25] Reading data...
19:51:59:279 -> [UART, PM25] Data not available.
19:51:59:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:279 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:279 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:299 -> [UART, PM25] Reading data...
19:51:59:300 -> [UART, PM25] Data not available.
19:51:59:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:300 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:300 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:320 -> [UART, PM25] Reading data...
19:51:59:321 -> [UART, PM25] Data not available.
19:51:59:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:326 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:326 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:342 -> [UART, PM25] Reading data...
19:51:59:342 -> [UART, PM25] Data not available.
19:51:59:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:342 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:342 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:363 -> [UART, PM25] Reading data...
19:51:59:363 -> [UART, PM25] Data not available.
19:51:59:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:363 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:363 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:396 -> [UART, PM25] Reading data...
19:51:59:413 -> [UART, PM25] Data not available.
19:51:59:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:413 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:413 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:413 -> [UART, PM25] Reading data...
19:51:59:413 -> [UART, PM25] Data not available.
19:51:59:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:413 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:413 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:425 -> [UART, PM25] Reading data...
19:51:59:426 -> [UART, PM25] Data not available.
19:51:59:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:426 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:426 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:446 -> [UART, PM25] Reading data...
19:51:59:447 -> [UART, PM25] Data not available.
19:51:59:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:447 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:447 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:480 -> [UART, PM25] Reading data...
19:51:59:481 -> [UART, PM25] Data not available.
19:51:59:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:481 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:481 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:488 -> [UART, PM25] Reading data...
19:51:59:489 -> [UART, PM25] Data not available.
19:51:59:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:489 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:489 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:509 -> [UART, PM25] Reading data...
19:51:59:510 -> [UART, PM25] Data not available.
19:51:59:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:510 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:510 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:530 -> [UART, PM25] Reading data...
19:51:59:531 -> [UART, PM25] Data not available.
19:51:59:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:531 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:531 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:552 -> [UART, PM25] Reading data...
19:51:59:552 -> [UART, PM25] Data not available.
19:51:59:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:552 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:552 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:573 -> [UART, PM25] Reading data...
19:51:59:573 -> [UART, PM25] Data not available.
19:51:59:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:573 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:573 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:594 -> [UART, PM25] Reading data...
19:51:59:594 -> [UART, PM25] Data not available.
19:51:59:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:594 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:594 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:615 -> [UART, PM25] Reading data...
19:51:59:615 -> [UART, PM25] Data not available.
19:51:59:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:615 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:615 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:635 -> [UART, PM25] Reading data...
19:51:59:636 -> [UART, PM25] Data not available.
19:51:59:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:636 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:636 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:656 -> [UART, PM25] Reading data...
19:51:59:657 -> [UART, PM25] Data not available.
19:51:59:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:657 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:657 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:678 -> [UART, PM25] Reading data...
19:51:59:678 -> [UART, PM25] Data not available.
19:51:59:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:678 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:678 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:698 -> [UART, PM25] Reading data...
19:51:59:699 -> [UART, PM25] Data not available.
19:51:59:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:699 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:699 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:720 -> [UART, PM25] Reading data...
19:51:59:720 -> [UART, PM25] Data not available.
19:51:59:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:720 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:720 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:740 -> [UART, PM25] Reading data...
19:51:59:741 -> [UART, PM25] Data not available.
19:51:59:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:741 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:741 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:761 -> [UART, PM25] Reading data...
19:51:59:762 -> [UART, PM25] Data not available.
19:51:59:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:762 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:762 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:783 -> [UART, PM25] Reading data...
19:51:59:783 -> [UART, PM25] Data not available.
19:51:59:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:783 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:783 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:803 -> [UART, PM25] Reading data...
19:51:59:804 -> [UART, PM25] Data not available.
19:51:59:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:804 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:804 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:824 -> [UART, PM25] Reading data...
19:51:59:825 -> [UART, PM25] Data not available.
19:51:59:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:825 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:825 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:846 -> [UART, PM25] Reading data...
19:51:59:846 -> [UART, PM25] Data not available.
19:51:59:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:846 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:846 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:867 -> [UART, PM25] Reading data...
19:51:59:867 -> [UART, PM25] Data not available.
19:51:59:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:867 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:867 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:888 -> [UART, PM25] Reading data...
19:51:59:888 -> [UART, PM25] Data not available.
19:51:59:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:888 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:888 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:909 -> [UART, PM25] Reading data...
19:51:59:909 -> [UART, PM25] Data not available.
19:51:59:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:909 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:909 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:929 -> [UART, PM25] Reading data...
19:51:59:930 -> [UART, PM25] Data not available.
19:51:59:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:930 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:930 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:950 -> [UART, PM25] Reading data...
19:51:59:951 -> [UART, PM25] Data not available.
19:51:59:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:951 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:951 -> [UART, PM25] Uart available, resetting event queue..
19:51:59:972 -> [UART, PM25] Reading data...
19:51:59:972 -> [UART, PM25] Data not available.
19:51:59:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:51:59:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:51:59:972 -> [UART, PM25] Uart available, clearing write errors..
19:51:59:972 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:008 -> [UART, PM25] Reading data...
19:52:00:009 -> [UART, PM25] Data not available.
19:52:00:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:014 -> [UART, PM25] Reading data...
19:52:00:015 -> [UART, PM25] Data not available.
19:52:00:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:015 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:015 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:034 -> [UART, PM25] Reading data...
19:52:00:034 -> [UART, PM25] Data not available.
19:52:00:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:035 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:035 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:055 -> [UART, PM25] Reading data...
19:52:00:056 -> [UART, PM25] Data not available.
19:52:00:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:056 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:056 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:076 -> [UART, PM25] Reading data...
19:52:00:076 -> [UART, PM25] Data not available.
19:52:00:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:098 -> [UART, PM25] Reading data...
19:52:00:098 -> [UART, PM25] Data not available.
19:52:00:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:118 -> [UART, PM25] Reading data...
19:52:00:119 -> [UART, PM25] Data not available.
19:52:00:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:119 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:119 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:139 -> [UART, PM25] Reading data...
19:52:00:140 -> [UART, PM25] Data not available.
19:52:00:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:140 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:140 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:160 -> [UART, PM25] Reading data...
19:52:00:161 -> [UART, PM25] Data not available.
19:52:00:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:182 -> [UART, PM25] Reading data...
19:52:00:182 -> [UART, PM25] Data not available.
19:52:00:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:182 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:182 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:203 -> [UART, PM25] Reading data...
19:52:00:203 -> [UART, PM25] Data not available.
19:52:00:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:203 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:203 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:223 -> [UART, PM25] Reading data...
19:52:00:224 -> [UART, PM25] Data not available.
19:52:00:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:224 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:224 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:244 -> [UART, PM25] Reading data...
19:52:00:245 -> [UART, PM25] Data not available.
19:52:00:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:245 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:245 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:265 -> [UART, PM25] Reading data...
19:52:00:266 -> [UART, PM25] Data not available.
19:52:00:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:266 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:266 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:287 -> [UART, PM25] Reading data...
19:52:00:287 -> [UART, PM25] Data not available.
19:52:00:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:287 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:287 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:307 -> [UART, PM25] Reading data...
19:52:00:308 -> [UART, PM25] Data not available.
19:52:00:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:329 -> [UART, PM25] Reading data...
19:52:00:329 -> [UART, PM25] Data not available.
19:52:00:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:329 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:329 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:350 -> [UART, PM25] Reading data...
19:52:00:350 -> [UART, PM25] Data not available.
19:52:00:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:350 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:350 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:370 -> [UART, PM25] Reading data...
19:52:00:371 -> [UART, PM25] Data not available.
19:52:00:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:371 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:371 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:392 -> [UART, PM25] Reading data...
19:52:00:392 -> [UART, PM25] Data not available.
19:52:00:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:392 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:392 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:413 -> [UART, PM25] Reading data...
19:52:00:413 -> [UART, PM25] Data not available.
19:52:00:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:413 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:413 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:434 -> [UART, PM25] Reading data...
19:52:00:434 -> [UART, PM25] Data not available.
19:52:00:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:434 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:434 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:454 -> [UART, PM25] Reading data...
19:52:00:455 -> [UART, PM25] Data not available.
19:52:00:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:455 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:455 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:475 -> [UART, PM25] Reading data...
19:52:00:476 -> [UART, PM25] Data not available.
19:52:00:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:476 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:476 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:497 -> [UART, PM25] Reading data...
19:52:00:497 -> [UART, PM25] Data not available.
19:52:00:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:497 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:497 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:525 -> [UART, PM25] Reading data...
19:52:00:526 -> [UART, PM25] Data not available.
19:52:00:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:538 -> [UART, PM25] Reading data...
19:52:00:539 -> [UART, PM25] Data not available.
19:52:00:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:539 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:539 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:559 -> [UART, PM25] Reading data...
19:52:00:560 -> [UART, PM25] Data not available.
19:52:00:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:560 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:560 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:581 -> [UART, PM25] Reading data...
19:52:00:581 -> [UART, PM25] Data not available.
19:52:00:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:581 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:581 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:601 -> [UART, PM25] Reading data...
19:52:00:602 -> [UART, PM25] Data not available.
19:52:00:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:622 -> [UART, PM25] Reading data...
19:52:00:623 -> [UART, PM25] Data not available.
19:52:00:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:643 -> [UART, PM25] Reading data...
19:52:00:644 -> [UART, PM25] Data not available.
19:52:00:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:664 -> [UART, PM25] Reading data...
19:52:00:665 -> [UART, PM25] Data not available.
19:52:00:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:665 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:665 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:685 -> [UART, PM25] Reading data...
19:52:00:686 -> [UART, PM25] Data not available.
19:52:00:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:686 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:686 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:707 -> [UART, PM25] Reading data...
19:52:00:708 -> [UART, PM25] Data not available.
19:52:00:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:708 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:708 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:727 -> [UART, PM25] Reading data...
19:52:00:728 -> [UART, PM25] Data not available.
19:52:00:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:728 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:728 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:748 -> [UART, PM25] Reading data...
19:52:00:749 -> [UART, PM25] Data not available.
19:52:00:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:749 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:749 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:769 -> [UART, PM25] Reading data...
19:52:00:770 -> [UART, PM25] Data not available.
19:52:00:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:770 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:770 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:791 -> [UART, PM25] Reading data...
19:52:00:791 -> [UART, PM25] Data not available.
19:52:00:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:791 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:791 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:812 -> [UART, PM25] Reading data...
19:52:00:812 -> [UART, PM25] Data not available.
19:52:00:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:833 -> [UART, PM25] Reading data...
19:52:00:833 -> [UART, PM25] Data not available.
19:52:00:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:834 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:834 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:853 -> [UART, PM25] Reading data...
19:52:00:854 -> [UART, PM25] Data not available.
19:52:00:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:874 -> [UART, PM25] Reading data...
19:52:00:875 -> [UART, PM25] Data not available.
19:52:00:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:896 -> [UART, PM25] Reading data...
19:52:00:896 -> [UART, PM25] Data not available.
19:52:00:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:917 -> [UART, PM25] Reading data...
19:52:00:917 -> [UART, PM25] Data not available.
19:52:00:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:918 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:918 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:937 -> [UART, PM25] Reading data...
19:52:00:938 -> [UART, PM25] Data not available.
19:52:00:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:958 -> [UART, PM25] Reading data...
19:52:00:959 -> [UART, PM25] Data not available.
19:52:00:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:959 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:959 -> [UART, PM25] Uart available, resetting event queue..
19:52:00:979 -> [UART, PM25] Reading data...
19:52:00:980 -> [UART, PM25] Data not available.
19:52:00:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:00:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:00:980 -> [UART, PM25] Uart available, clearing write errors..
19:52:00:980 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:001 -> [UART, PM25] Reading data...
19:52:01:001 -> [UART, PM25] Data not available.
19:52:01:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:022 -> [UART, PM25] Reading data...
19:52:01:022 -> [UART, PM25] Data not available.
19:52:01:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:042 -> [UART, PM25] Reading data...
19:52:01:043 -> [UART, PM25] Data not available.
19:52:01:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:063 -> [UART, PM25] Reading data...
19:52:01:064 -> [UART, PM25] Data not available.
19:52:01:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:064 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:064 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:085 -> [UART, PM25] Reading data...
19:52:01:085 -> [UART, PM25] Data not available.
19:52:01:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:085 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:085 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:106 -> [UART, PM25] Reading data...
19:52:01:106 -> [UART, PM25] Data not available.
19:52:01:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:106 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:106 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:127 -> [UART, PM25] Reading data...
19:52:01:127 -> [UART, PM25] Data not available.
19:52:01:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:127 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:127 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:148 -> [UART, PM25] Reading data...
19:52:01:148 -> [UART, PM25] Data not available.
19:52:01:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:148 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:148 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:196 -> [UART, PM25] Reading data...
19:52:01:198 -> [UART, PM25] Data not available.
19:52:01:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:198 -> [UART, PM25] Reading data...
19:52:01:198 -> [UART, PM25] Data not available.
19:52:01:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:211 -> [UART, PM25] Reading data...
19:52:01:211 -> [UART, PM25] Data not available.
19:52:01:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:211 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:211 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:231 -> [UART, PM25] Reading data...
19:52:01:232 -> [UART, PM25] Data not available.
19:52:01:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:252 -> [UART, PM25] Reading data...
19:52:01:253 -> [UART, PM25] Data not available.
19:52:01:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:273 -> [UART, PM25] Reading data...
19:52:01:274 -> [UART, PM25] Data not available.
19:52:01:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:274 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:274 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:294 -> [UART, PM25] Reading data...
19:52:01:295 -> [UART, PM25] Data not available.
19:52:01:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:316 -> [UART, PM25] Reading data...
19:52:01:316 -> [UART, PM25] Data not available.
19:52:01:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:316 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:316 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:336 -> [UART, PM25] Reading data...
19:52:01:337 -> [UART, PM25] Data not available.
19:52:01:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:358 -> [UART, PM25] Reading data...
19:52:01:358 -> [UART, PM25] Data not available.
19:52:01:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:378 -> [UART, PM25] Reading data...
19:52:01:379 -> [UART, PM25] Data not available.
19:52:01:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:399 -> [UART, PM25] Reading data...
19:52:01:400 -> [UART, PM25] Data not available.
19:52:01:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:400 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:400 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:421 -> [UART, PM25] Reading data...
19:52:01:422 -> [UART, PM25] Data not available.
19:52:01:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:422 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:422 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:442 -> [UART, PM25] Reading data...
19:52:01:443 -> [UART, PM25] Data not available.
19:52:01:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:443 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:443 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:463 -> [UART, PM25] Reading data...
19:52:01:464 -> [UART, PM25] Data not available.
19:52:01:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:464 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:464 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:484 -> [UART, PM25] Reading data...
19:52:01:485 -> [UART, PM25] Data not available.
19:52:01:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:485 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:485 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:506 -> [UART, PM25] Reading data...
19:52:01:506 -> [UART, PM25] Data not available.
19:52:01:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:506 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:506 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:527 -> [UART, PM25] Reading data...
19:52:01:527 -> [UART, PM25] Data not available.
19:52:01:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:527 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:527 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:527 -> PING!
19:52:01:741 -> [UART, PM25] Reading data...
19:52:01:741 -> [UART, PM25] Data not available.
19:52:01:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:741 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:741 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:761 -> [UART, PM25] Reading data...
19:52:01:762 -> [UART, PM25] Data not available.
19:52:01:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:783 -> [UART, PM25] Reading data...
19:52:01:783 -> [UART, PM25] Data not available.
19:52:01:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:783 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:783 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:803 -> [UART, PM25] Reading data...
19:52:01:804 -> [UART, PM25] Data not available.
19:52:01:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:804 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:804 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:825 -> [UART, PM25] Reading data...
19:52:01:825 -> [UART, PM25] Data not available.
19:52:01:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:825 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:825 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:846 -> [UART, PM25] Reading data...
19:52:01:847 -> [UART, PM25] Data not available.
19:52:01:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:847 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:847 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:866 -> [UART, PM25] Reading data...
19:52:01:867 -> [UART, PM25] Data not available.
19:52:01:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:867 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:867 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:887 -> [UART, PM25] Reading data...
19:52:01:888 -> [UART, PM25] Data not available.
19:52:01:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:888 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:888 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:909 -> [UART, PM25] Reading data...
19:52:01:909 -> [UART, PM25] Data not available.
19:52:01:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:909 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:909 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:930 -> [UART, PM25] Reading data...
19:52:01:930 -> [UART, PM25] Data not available.
19:52:01:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:930 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:930 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:950 -> [UART, PM25] Reading data...
19:52:01:951 -> [UART, PM25] Data not available.
19:52:01:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:951 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:951 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:972 -> [UART, PM25] Reading data...
19:52:01:972 -> [UART, PM25] Data not available.
19:52:01:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:972 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:972 -> [UART, PM25] Uart available, resetting event queue..
19:52:01:992 -> [UART, PM25] Reading data...
19:52:01:993 -> [UART, PM25] Data not available.
19:52:01:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:01:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:01:993 -> [UART, PM25] Uart available, clearing write errors..
19:52:01:993 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:013 -> [UART, PM25] Reading data...
19:52:02:014 -> [UART, PM25] Data not available.
19:52:02:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:014 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:014 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:035 -> [UART, PM25] Reading data...
19:52:02:035 -> [UART, PM25] Data not available.
19:52:02:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:035 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:035 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:062 -> [UART, PM25] Reading data...
19:52:02:063 -> [UART, PM25] Data not available.
19:52:02:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:063 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:063 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:077 -> [UART, PM25] Reading data...
19:52:02:077 -> [UART, PM25] Data not available.
19:52:02:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:097 -> [UART, PM25] Reading data...
19:52:02:098 -> [UART, PM25] Data not available.
19:52:02:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:118 -> [UART, PM25] Reading data...
19:52:02:119 -> [UART, PM25] Data not available.
19:52:02:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:119 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:119 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:139 -> [UART, PM25] Reading data...
19:52:02:140 -> [UART, PM25] Data not available.
19:52:02:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:140 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:140 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:160 -> [UART, PM25] Reading data...
19:52:02:161 -> [UART, PM25] Data not available.
19:52:02:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:181 -> [UART, PM25] Reading data...
19:52:02:182 -> [UART, PM25] Data not available.
19:52:02:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:182 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:182 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:202 -> [UART, PM25] Reading data...
19:52:02:203 -> [UART, PM25] Data not available.
19:52:02:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:203 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:203 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:225 -> [UART, PM25] Reading data...
19:52:02:226 -> [UART, PM25] Data not available.
19:52:02:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:226 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:226 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:244 -> [UART, PM25] Reading data...
19:52:02:245 -> [UART, PM25] Data not available.
19:52:02:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:245 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:245 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:265 -> [UART, PM25] Reading data...
19:52:02:266 -> [UART, PM25] Data not available.
19:52:02:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:266 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:266 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:286 -> [UART, PM25] Reading data...
19:52:02:287 -> [UART, PM25] Data not available.
19:52:02:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:287 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:287 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:307 -> [UART, PM25] Reading data...
19:52:02:308 -> [UART, PM25] Data not available.
19:52:02:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:328 -> [UART, PM25] Reading data...
19:52:02:329 -> [UART, PM25] Data not available.
19:52:02:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:329 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:329 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:350 -> [UART, PM25] Reading data...
19:52:02:350 -> [UART, PM25] Data not available.
19:52:02:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:351 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:351 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:370 -> [UART, PM25] Reading data...
19:52:02:371 -> [UART, PM25] Data not available.
19:52:02:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:371 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:371 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:391 -> [UART, PM25] Reading data...
19:52:02:392 -> [UART, PM25] Data not available.
19:52:02:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:392 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:392 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:413 -> [UART, PM25] Reading data...
19:52:02:413 -> [UART, PM25] Data not available.
19:52:02:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:413 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:413 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:437 -> [UART, PM25] Reading data...
19:52:02:437 -> [UART, PM25] Data not available.
19:52:02:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:437 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:437 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:454 -> [UART, PM25] Reading data...
19:52:02:455 -> [UART, PM25] Data not available.
19:52:02:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:455 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:455 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:476 -> [UART, PM25] Reading data...
19:52:02:476 -> [UART, PM25] Data not available.
19:52:02:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:476 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:476 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:496 -> [UART, PM25] Reading data...
19:52:02:496 -> [UART, PM25] Data not available.
19:52:02:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:497 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:497 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:517 -> [UART, PM25] Reading data...
19:52:02:518 -> [UART, PM25] Data not available.
19:52:02:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:518 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:518 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:540 -> [UART, PM25] Reading data...
19:52:02:541 -> [UART, PM25] Data not available.
19:52:02:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:541 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:541 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:560 -> [UART, PM25] Reading data...
19:52:02:560 -> [UART, PM25] Data not available.
19:52:02:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:560 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:560 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:584 -> [UART, PM25] Reading data...
19:52:02:584 -> [UART, PM25] Data not available.
19:52:02:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:584 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:584 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:601 -> [UART, PM25] Reading data...
19:52:02:602 -> [UART, PM25] Data not available.
19:52:02:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:622 -> [UART, PM25] Reading data...
19:52:02:623 -> [UART, PM25] Data not available.
19:52:02:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:644 -> [UART, PM25] Reading data...
19:52:02:644 -> [UART, PM25] Data not available.
19:52:02:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:665 -> [UART, PM25] Reading data...
19:52:02:665 -> [UART, PM25] Data not available.
19:52:02:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:665 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:665 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:685 -> [UART, PM25] Reading data...
19:52:02:686 -> [UART, PM25] Data not available.
19:52:02:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:686 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:686 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:706 -> [UART, PM25] Reading data...
19:52:02:707 -> [UART, PM25] Data not available.
19:52:02:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:707 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:707 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:727 -> [UART, PM25] Reading data...
19:52:02:728 -> [UART, PM25] Data not available.
19:52:02:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:728 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:728 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:748 -> [UART, PM25] Reading data...
19:52:02:749 -> [UART, PM25] Data not available.
19:52:02:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:749 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:749 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:769 -> [UART, PM25] Reading data...
19:52:02:770 -> [UART, PM25] Data not available.
19:52:02:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:770 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:770 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:790 -> [UART, PM25] Reading data...
19:52:02:791 -> [UART, PM25] Data not available.
19:52:02:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:791 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:791 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:811 -> [UART, PM25] Reading data...
19:52:02:812 -> [UART, PM25] Data not available.
19:52:02:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:832 -> [UART, PM25] Reading data...
19:52:02:832 -> [UART, PM25] Data not available.
19:52:02:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:833 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:833 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:853 -> [UART, PM25] Reading data...
19:52:02:854 -> [UART, PM25] Data not available.
19:52:02:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:874 -> [UART, PM25] Reading data...
19:52:02:875 -> [UART, PM25] Data not available.
19:52:02:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:895 -> [UART, PM25] Reading data...
19:52:02:896 -> [UART, PM25] Data not available.
19:52:02:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:917 -> [UART, PM25] Reading data...
19:52:02:917 -> [UART, PM25] Data not available.
19:52:02:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:917 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:917 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:937 -> [UART, PM25] Reading data...
19:52:02:938 -> [UART, PM25] Data not available.
19:52:02:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:959 -> [UART, PM25] Reading data...
19:52:02:959 -> [UART, PM25] Data not available.
19:52:02:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:959 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:959 -> [UART, PM25] Uart available, resetting event queue..
19:52:02:980 -> [UART, PM25] Reading data...
19:52:02:980 -> [UART, PM25] Data not available.
19:52:02:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:02:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:02:980 -> [UART, PM25] Uart available, clearing write errors..
19:52:02:980 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:001 -> [UART, PM25] Reading data...
19:52:03:001 -> [UART, PM25] Data not available.
19:52:03:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:022 -> [UART, PM25] Reading data...
19:52:03:022 -> [UART, PM25] Data not available.
19:52:03:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:043 -> [UART, PM25] Reading data...
19:52:03:043 -> [UART, PM25] Data not available.
19:52:03:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:064 -> [UART, PM25] Reading data...
19:52:03:064 -> [UART, PM25] Data not available.
19:52:03:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:064 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:064 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:098 -> [UART, PM25] Reading data...
19:52:03:098 -> [UART, PM25] Data not available.
19:52:03:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:106 -> [UART, PM25] Reading data...
19:52:03:106 -> [UART, PM25] Data not available.
19:52:03:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:106 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:106 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:155 -> [UART, PM25] Reading data...
19:52:03:169 -> [UART, PM25] Data not available.
19:52:03:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:169 -> [UART, PM25] Reading data...
19:52:03:169 -> [UART, PM25] Data not available.
19:52:03:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:169 -> [UART, PM25] Reading data...
19:52:03:169 -> [UART, PM25] Data not available.
19:52:03:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:189 -> [UART, PM25] Reading data...
19:52:03:190 -> [UART, PM25] Data not available.
19:52:03:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:190 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:190 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:210 -> [UART, PM25] Reading data...
19:52:03:210 -> [UART, PM25] Data not available.
19:52:03:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:211 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:211 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:231 -> [UART, PM25] Reading data...
19:52:03:232 -> [UART, PM25] Data not available.
19:52:03:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:253 -> [UART, PM25] Reading data...
19:52:03:253 -> [UART, PM25] Data not available.
19:52:03:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:274 -> [UART, PM25] Reading data...
19:52:03:274 -> [UART, PM25] Data not available.
19:52:03:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:274 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:274 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:295 -> [UART, PM25] Reading data...
19:52:03:295 -> [UART, PM25] Data not available.
19:52:03:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:315 -> [UART, PM25] Reading data...
19:52:03:316 -> [UART, PM25] Data not available.
19:52:03:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:316 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:316 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:336 -> [UART, PM25] Reading data...
19:52:03:337 -> [UART, PM25] Data not available.
19:52:03:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:358 -> [UART, PM25] Reading data...
19:52:03:358 -> [UART, PM25] Data not available.
19:52:03:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:378 -> [UART, PM25] Reading data...
19:52:03:379 -> [UART, PM25] Data not available.
19:52:03:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:400 -> [UART, PM25] Reading data...
19:52:03:400 -> [UART, PM25] Data not available.
19:52:03:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:400 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:400 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:421 -> [UART, PM25] Reading data...
19:52:03:421 -> [UART, PM25] Data not available.
19:52:03:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:421 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:421 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:442 -> [UART, PM25] Reading data...
19:52:03:442 -> [UART, PM25] Data not available.
19:52:03:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:442 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:442 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:463 -> [UART, PM25] Reading data...
19:52:03:463 -> [UART, PM25] Data not available.
19:52:03:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:463 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:463 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:484 -> [UART, PM25] Reading data...
19:52:03:484 -> [UART, PM25] Data not available.
19:52:03:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:484 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:484 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:504 -> [UART, PM25] Reading data...
19:52:03:505 -> [UART, PM25] Data not available.
19:52:03:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:505 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:505 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:525 -> [UART, PM25] Reading data...
19:52:03:526 -> [UART, PM25] Data not available.
19:52:03:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:546 -> [UART, PM25] Reading data...
19:52:03:547 -> [UART, PM25] Data not available.
19:52:03:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:547 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:547 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:567 -> [UART, PM25] Reading data...
19:52:03:568 -> [UART, PM25] Data not available.
19:52:03:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:568 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:568 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:588 -> [UART, PM25] Reading data...
19:52:03:589 -> [UART, PM25] Data not available.
19:52:03:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:589 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:589 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:613 -> [UART, PM25] Reading data...
19:52:03:613 -> [UART, PM25] Data not available.
19:52:03:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:613 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:613 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:630 -> [UART, PM25] Reading data...
19:52:03:631 -> [UART, PM25] Data not available.
19:52:03:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:631 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:631 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:651 -> [UART, PM25] Reading data...
19:52:03:652 -> [UART, PM25] Data not available.
19:52:03:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:673 -> [UART, PM25] Reading data...
19:52:03:673 -> [UART, PM25] Data not available.
19:52:03:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:673 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:673 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:693 -> [UART, PM25] Reading data...
19:52:03:693 -> [UART, PM25] Data not available.
19:52:03:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:694 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:694 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:714 -> [UART, PM25] Reading data...
19:52:03:715 -> [UART, PM25] Data not available.
19:52:03:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:715 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:715 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:735 -> [UART, PM25] Reading data...
19:52:03:736 -> [UART, PM25] Data not available.
19:52:03:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:756 -> [UART, PM25] Reading data...
19:52:03:757 -> [UART, PM25] Data not available.
19:52:03:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:757 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:757 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:778 -> [UART, PM25] Reading data...
19:52:03:778 -> [UART, PM25] Data not available.
19:52:03:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:778 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:778 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:798 -> [UART, PM25] Reading data...
19:52:03:799 -> [UART, PM25] Data not available.
19:52:03:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:799 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:799 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:819 -> [UART, PM25] Reading data...
19:52:03:820 -> [UART, PM25] Data not available.
19:52:03:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:820 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:820 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:840 -> [UART, PM25] Reading data...
19:52:03:841 -> [UART, PM25] Data not available.
19:52:03:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:841 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:841 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:862 -> [UART, PM25] Reading data...
19:52:03:862 -> [UART, PM25] Data not available.
19:52:03:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:862 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:862 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:883 -> [UART, PM25] Reading data...
19:52:03:883 -> [UART, PM25] Data not available.
19:52:03:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:883 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:883 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:904 -> [UART, PM25] Reading data...
19:52:03:904 -> [UART, PM25] Data not available.
19:52:03:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:904 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:904 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:924 -> [UART, PM25] Reading data...
19:52:03:925 -> [UART, PM25] Data not available.
19:52:03:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:945 -> [UART, PM25] Reading data...
19:52:03:946 -> [UART, PM25] Data not available.
19:52:03:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:946 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:946 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:967 -> [UART, PM25] Reading data...
19:52:03:967 -> [UART, PM25] Data not available.
19:52:03:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:03:988 -> [UART, PM25] Reading data...
19:52:03:988 -> [UART, PM25] Data not available.
19:52:03:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:03:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:03:988 -> [UART, PM25] Uart available, clearing write errors..
19:52:03:988 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:008 -> [UART, PM25] Reading data...
19:52:04:009 -> [UART, PM25] Data not available.
19:52:04:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:029 -> [UART, PM25] Reading data...
19:52:04:030 -> [UART, PM25] Data not available.
19:52:04:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:030 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:030 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:051 -> [UART, PM25] Reading data...
19:52:04:051 -> [UART, PM25] Data not available.
19:52:04:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:051 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:051 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:072 -> [UART, PM25] Reading data...
19:52:04:072 -> [UART, PM25] Data not available.
19:52:04:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:072 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:072 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:092 -> [UART, PM25] Reading data...
19:52:04:093 -> [UART, PM25] Data not available.
19:52:04:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:093 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:093 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:123 -> [UART, PM25] Reading data...
19:52:04:124 -> [UART, PM25] Data not available.
19:52:04:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:124 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:124 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:135 -> [UART, PM25] Reading data...
19:52:04:135 -> [UART, PM25] Data not available.
19:52:04:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:135 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:135 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:156 -> [UART, PM25] Reading data...
19:52:04:156 -> [UART, PM25] Data not available.
19:52:04:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:177 -> [UART, PM25] Reading data...
19:52:04:177 -> [UART, PM25] Data not available.
19:52:04:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:177 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:177 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:197 -> [UART, PM25] Reading data...
19:52:04:198 -> [UART, PM25] Data not available.
19:52:04:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:218 -> [UART, PM25] Reading data...
19:52:04:219 -> [UART, PM25] Data not available.
19:52:04:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:219 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:219 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:239 -> [UART, PM25] Reading data...
19:52:04:240 -> [UART, PM25] Data not available.
19:52:04:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:240 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:240 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:260 -> [UART, PM25] Reading data...
19:52:04:261 -> [UART, PM25] Data not available.
19:52:04:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:261 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:261 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:282 -> [UART, PM25] Reading data...
19:52:04:282 -> [UART, PM25] Data not available.
19:52:04:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:282 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:282 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:302 -> [UART, PM25] Reading data...
19:52:04:303 -> [UART, PM25] Data not available.
19:52:04:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:323 -> [UART, PM25] Reading data...
19:52:04:324 -> [UART, PM25] Data not available.
19:52:04:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:324 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:324 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:344 -> [UART, PM25] Reading data...
19:52:04:345 -> [UART, PM25] Data not available.
19:52:04:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:345 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:345 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:365 -> [UART, PM25] Reading data...
19:52:04:366 -> [UART, PM25] Data not available.
19:52:04:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:366 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:366 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:387 -> [UART, PM25] Reading data...
19:52:04:387 -> [UART, PM25] Data not available.
19:52:04:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:387 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:387 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:407 -> [UART, PM25] Reading data...
19:52:04:408 -> [UART, PM25] Data not available.
19:52:04:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:408 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:408 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:428 -> [UART, PM25] Reading data...
19:52:04:429 -> [UART, PM25] Data not available.
19:52:04:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:429 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:429 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:450 -> [UART, PM25] Reading data...
19:52:04:450 -> [UART, PM25] Data not available.
19:52:04:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:450 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:450 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:470 -> [UART, PM25] Reading data...
19:52:04:471 -> [UART, PM25] Data not available.
19:52:04:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:471 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:471 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:491 -> [UART, PM25] Reading data...
19:52:04:492 -> [UART, PM25] Data not available.
19:52:04:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:492 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:492 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:512 -> [UART, PM25] Reading data...
19:52:04:513 -> [UART, PM25] Data not available.
19:52:04:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:513 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:513 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:533 -> [UART, PM25] Reading data...
19:52:04:534 -> [UART, PM25] Data not available.
19:52:04:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:534 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:534 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:554 -> [UART, PM25] Reading data...
19:52:04:555 -> [UART, PM25] Data not available.
19:52:04:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:555 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:555 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:575 -> [UART, PM25] Reading data...
19:52:04:576 -> [UART, PM25] Data not available.
19:52:04:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:576 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:576 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:597 -> [UART, PM25] Reading data...
19:52:04:597 -> [UART, PM25] Data not available.
19:52:04:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:597 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:597 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:618 -> [UART, PM25] Reading data...
19:52:04:618 -> [UART, PM25] Data not available.
19:52:04:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:618 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:618 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:646 -> [UART, PM25] Reading data...
19:52:04:647 -> [UART, PM25] Data not available.
19:52:04:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:647 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:647 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:659 -> [UART, PM25] Reading data...
19:52:04:660 -> [UART, PM25] Data not available.
19:52:04:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:660 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:660 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:683 -> [UART, PM25] Reading data...
19:52:04:685 -> [UART, PM25] Data not available.
19:52:04:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:685 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:685 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:702 -> [UART, PM25] Reading data...
19:52:04:702 -> [UART, PM25] Data not available.
19:52:04:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:702 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:702 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:722 -> [UART, PM25] Reading data...
19:52:04:723 -> [UART, PM25] Data not available.
19:52:04:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:723 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:723 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:743 -> [UART, PM25] Reading data...
19:52:04:744 -> [UART, PM25] Data not available.
19:52:04:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:744 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:744 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:764 -> [UART, PM25] Reading data...
19:52:04:765 -> [UART, PM25] Data not available.
19:52:04:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:765 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:765 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:785 -> [UART, PM25] Reading data...
19:52:04:786 -> [UART, PM25] Data not available.
19:52:04:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:786 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:786 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:807 -> [UART, PM25] Reading data...
19:52:04:807 -> [UART, PM25] Data not available.
19:52:04:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:807 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:807 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:827 -> [UART, PM25] Reading data...
19:52:04:828 -> [UART, PM25] Data not available.
19:52:04:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:828 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:828 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:848 -> [UART, PM25] Reading data...
19:52:04:849 -> [UART, PM25] Data not available.
19:52:04:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:849 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:849 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:869 -> [UART, PM25] Reading data...
19:52:04:870 -> [UART, PM25] Data not available.
19:52:04:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:870 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:870 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:890 -> [UART, PM25] Reading data...
19:52:04:891 -> [UART, PM25] Data not available.
19:52:04:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:891 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:891 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:912 -> [UART, PM25] Reading data...
19:52:04:912 -> [UART, PM25] Data not available.
19:52:04:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:912 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:912 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:932 -> [UART, PM25] Reading data...
19:52:04:933 -> [UART, PM25] Data not available.
19:52:04:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:933 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:933 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:953 -> [UART, PM25] Reading data...
19:52:04:966 -> [UART, PM25] Data not available.
19:52:04:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:966 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:966 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:974 -> [UART, PM25] Reading data...
19:52:04:985 -> [UART, PM25] Data not available.
19:52:04:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:985 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:985 -> [UART, PM25] Uart available, resetting event queue..
19:52:04:996 -> [UART, PM25] Reading data...
19:52:04:996 -> [UART, PM25] Data not available.
19:52:04:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:04:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:04:996 -> [UART, PM25] Uart available, clearing write errors..
19:52:04:996 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:017 -> [UART, PM25] Reading data...
19:52:05:017 -> [UART, PM25] Data not available.
19:52:05:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:017 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:017 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:037 -> [UART, PM25] Reading data...
19:52:05:038 -> [UART, PM25] Data not available.
19:52:05:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:038 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:038 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:058 -> [UART, PM25] Reading data...
19:52:05:059 -> [UART, PM25] Data not available.
19:52:05:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:059 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:059 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:079 -> [UART, PM25] Reading data...
19:52:05:080 -> [UART, PM25] Data not available.
19:52:05:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:080 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:080 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:101 -> [UART, PM25] Reading data...
19:52:05:101 -> [UART, PM25] Data not available.
19:52:05:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:101 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:101 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:122 -> [UART, PM25] Reading data...
19:52:05:122 -> [UART, PM25] Data not available.
19:52:05:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:122 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:122 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:143 -> [UART, PM25] Reading data...
19:52:05:143 -> [UART, PM25] Data not available.
19:52:05:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:143 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:143 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:168 -> [UART, PM25] Reading data...
19:52:05:169 -> [UART, PM25] Data not available.
19:52:05:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:184 -> [UART, PM25] Reading data...
19:52:05:185 -> [UART, PM25] Data not available.
19:52:05:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:185 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:185 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:206 -> [UART, PM25] Reading data...
19:52:05:206 -> [UART, PM25] Data not available.
19:52:05:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:206 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:206 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:226 -> [UART, PM25] Reading data...
19:52:05:227 -> [UART, PM25] Data not available.
19:52:05:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:227 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:227 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:247 -> [UART, PM25] Reading data...
19:52:05:248 -> [UART, PM25] Data not available.
19:52:05:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:248 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:248 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:268 -> [UART, PM25] Reading data...
19:52:05:269 -> [UART, PM25] Data not available.
19:52:05:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:269 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:269 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:290 -> [UART, PM25] Reading data...
19:52:05:290 -> [UART, PM25] Data not available.
19:52:05:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:290 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:290 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:311 -> [UART, PM25] Reading data...
19:52:05:311 -> [UART, PM25] Data not available.
19:52:05:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:311 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:311 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:331 -> [UART, PM25] Reading data...
19:52:05:332 -> [UART, PM25] Data not available.
19:52:05:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:332 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:332 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:353 -> [UART, PM25] Reading data...
19:52:05:353 -> [UART, PM25] Data not available.
19:52:05:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:353 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:353 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:373 -> [UART, PM25] Reading data...
19:52:05:374 -> [UART, PM25] Data not available.
19:52:05:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:374 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:374 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:395 -> [UART, PM25] Reading data...
19:52:05:395 -> [UART, PM25] Data not available.
19:52:05:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:395 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:395 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:416 -> [UART, PM25] Reading data...
19:52:05:416 -> [UART, PM25] Data not available.
19:52:05:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:416 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:416 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:436 -> [UART, PM25] Reading data...19:52:05:478 -> [UART, PM25] Reading data...19:52:05:458 -> [UART, PM25] Reading data...
19:52:05:458 -> [UART, PM25] Data not available.
19:52:05:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:458 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:458 -> [UART, PM25] Uart available, resetting event queue..

19:52:05:437 -> [UART, PM25] Data not available.
19:52:05:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:437 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:437 -> [UART, PM25] Uart available, resetting event queue..

19:52:05:479 -> [UART, PM25] Data not available.
19:52:05:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:479 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:479 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:500 -> [UART, PM25] Reading data...
19:52:05:500 -> [UART, PM25] Data not available.
19:52:05:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:500 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:500 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:521 -> [UART, PM25] Reading data...
19:52:05:521 -> [UART, PM25] Data not available.
19:52:05:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:521 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:521 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:542 -> [UART, PM25] Reading data...
19:52:05:542 -> [UART, PM25] Data not available.
19:52:05:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:542 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:542 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:562 -> [UART, PM25] Reading data...
19:52:05:563 -> [UART, PM25] Data not available.
19:52:05:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:563 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:563 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:583 -> [UART, PM25] Reading data...
19:52:05:584 -> [UART, PM25] Data not available.
19:52:05:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:584 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:584 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:605 -> [UART, PM25] Reading data...
19:52:05:606 -> [UART, PM25] Data not available.
19:52:05:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:606 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:606 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:627 -> [UART, PM25] Reading data...
19:52:05:627 -> [UART, PM25] Data not available.
19:52:05:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:627 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:627 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:648 -> [UART, PM25] Reading data...
19:52:05:648 -> [UART, PM25] Data not available.
19:52:05:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:648 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:648 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:678 -> [UART, PM25] Reading data...
19:52:05:679 -> [UART, PM25] Data not available.
19:52:05:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:679 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:679 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:689 -> [UART, PM25] Reading data...
19:52:05:690 -> [UART, PM25] Data not available.
19:52:05:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:690 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:690 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:711 -> [UART, PM25] Reading data...
19:52:05:711 -> [UART, PM25] Data not available.
19:52:05:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:711 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:711 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:732 -> [UART, PM25] Reading data...
19:52:05:732 -> [UART, PM25] Data not available.
19:52:05:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:732 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:732 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:752 -> [UART, PM25] Reading data...
19:52:05:753 -> [UART, PM25] Data not available.
19:52:05:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:753 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:753 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:774 -> [UART, PM25] Reading data...
19:52:05:774 -> [UART, PM25] Data not available.
19:52:05:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:774 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:774 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:794 -> [UART, PM25] Reading data...
19:52:05:795 -> [UART, PM25] Data not available.
19:52:05:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:795 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:795 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:816 -> [UART, PM25] Reading data...
19:52:05:816 -> [UART, PM25] Data not available.
19:52:05:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:816 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:816 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:837 -> [UART, PM25] Reading data...
19:52:05:837 -> [UART, PM25] Data not available.
19:52:05:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:837 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:837 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:857 -> [UART, PM25] Reading data...
19:52:05:858 -> [UART, PM25] Data not available.
19:52:05:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:878 -> [UART, PM25] Reading data...
19:52:05:879 -> [UART, PM25] Data not available.
19:52:05:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:879 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:879 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:899 -> [UART, PM25] Reading data...
19:52:05:900 -> [UART, PM25] Data not available.
19:52:05:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:900 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:900 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:921 -> [UART, PM25] Reading data...
19:52:05:921 -> [UART, PM25] Data not available.
19:52:05:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:921 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:921 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:941 -> [UART, PM25] Reading data...
19:52:05:942 -> [UART, PM25] Data not available.
19:52:05:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:942 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:942 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:962 -> [UART, PM25] Reading data...
19:52:05:963 -> [UART, PM25] Data not available.
19:52:05:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:963 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:963 -> [UART, PM25] Uart available, resetting event queue..
19:52:05:984 -> [UART, PM25] Reading data...
19:52:05:984 -> [UART, PM25] Data not available.
19:52:05:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:05:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:05:984 -> [UART, PM25] Uart available, clearing write errors..
19:52:05:984 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:004 -> [UART, PM25] Reading data...
19:52:06:005 -> [UART, PM25] Data not available.
19:52:06:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:005 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:005 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:026 -> [UART, PM25] Reading data...
19:52:06:026 -> [UART, PM25] Data not available.
19:52:06:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:026 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:026 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:046 -> [UART, PM25] Reading data...
19:52:06:047 -> [UART, PM25] Data not available.
19:52:06:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:047 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:047 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:067 -> [UART, PM25] Reading data...
19:52:06:068 -> [UART, PM25] Data not available.
19:52:06:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:068 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:068 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:088 -> [UART, PM25] Reading data...
19:52:06:089 -> [UART, PM25] Data not available.
19:52:06:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:089 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:089 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:109 -> [UART, PM25] Reading data...
19:52:06:110 -> [UART, PM25] Data not available.
19:52:06:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:110 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:110 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:130 -> [UART, PM25] Reading data...
19:52:06:131 -> [UART, PM25] Data not available.
19:52:06:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:131 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:131 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:152 -> [UART, PM25] Reading data...
19:52:06:152 -> [UART, PM25] Data not available.
19:52:06:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:152 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:152 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:172 -> [UART, PM25] Reading data...
19:52:06:173 -> [UART, PM25] Data not available.
19:52:06:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:173 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:173 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:198 -> [UART, PM25] Reading data...
19:52:06:199 -> [UART, PM25] Data not available.
19:52:06:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:199 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:199 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:214 -> [UART, PM25] Reading data...
19:52:06:215 -> [UART, PM25] Data not available.
19:52:06:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:215 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:215 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:236 -> [UART, PM25] Reading data...
19:52:06:236 -> [UART, PM25] Data not available.
19:52:06:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:236 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:236 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:236 -> PING!
19:52:06:459 -> [UART, PM25] Reading data...
19:52:06:460 -> [UART, PM25] Data not available.
19:52:06:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:460 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:460 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:480 -> [UART, PM25] Reading data...
19:52:06:481 -> [UART, PM25] Data not available.
19:52:06:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:481 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:481 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:502 -> [UART, PM25] Reading data...
19:52:06:502 -> [UART, PM25] Data not available.
19:52:06:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:502 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:502 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:522 -> [UART, PM25] Reading data...
19:52:06:523 -> [UART, PM25] Data not available.
19:52:06:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:523 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:523 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:543 -> [UART, PM25] Reading data...
19:52:06:544 -> [UART, PM25] Data not available.
19:52:06:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:544 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:544 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:564 -> [UART, PM25] Reading data...
19:52:06:565 -> [UART, PM25] Data not available.
19:52:06:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:565 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:565 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:585 -> [UART, PM25] Reading data...
19:52:06:586 -> [UART, PM25] Data not available.
19:52:06:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:586 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:586 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:607 -> [UART, PM25] Reading data...
19:52:06:607 -> [UART, PM25] Data not available.
19:52:06:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:607 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:607 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:627 -> [UART, PM25] Reading data...
19:52:06:628 -> [UART, PM25] Data not available.
19:52:06:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:628 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:628 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:648 -> [UART, PM25] Reading data...
19:52:06:649 -> [UART, PM25] Data not available.
19:52:06:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:649 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:649 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:670 -> [UART, PM25] Reading data...
19:52:06:670 -> [UART, PM25] Data not available.
19:52:06:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:670 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:670 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:691 -> [UART, PM25] Reading data...
19:52:06:691 -> [UART, PM25] Data not available.
19:52:06:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:691 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:691 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:712 -> [UART, PM25] Reading data...
19:52:06:712 -> [UART, PM25] Data not available.
19:52:06:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:712 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:712 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:733 -> [UART, PM25] Reading data...
19:52:06:733 -> [UART, PM25] Data not available.
19:52:06:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:733 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:733 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:753 -> [UART, PM25] Reading data...
19:52:06:754 -> [UART, PM25] Data not available.
19:52:06:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:754 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:754 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:774 -> [UART, PM25] Reading data...
19:52:06:775 -> [UART, PM25] Data not available.
19:52:06:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:775 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:775 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:795 -> [UART, PM25] Reading data...
19:52:06:801 -> [UART, PM25] Data not available.
19:52:06:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:801 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:801 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:816 -> [UART, PM25] Reading data...
19:52:06:817 -> [UART, PM25] Data not available.
19:52:06:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:817 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:817 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:838 -> [UART, PM25] Reading data...
19:52:06:838 -> [UART, PM25] Data not available.
19:52:06:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:838 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:838 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:873 -> [UART, PM25] Reading data...
19:52:06:880 -> [UART, PM25] Data not available.
19:52:06:880 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:880 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:880 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:880 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:880 -> [UART, PM25] Reading data...
19:52:06:880 -> [UART, PM25] Data not available.
19:52:06:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:890 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:890 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:900 -> [UART, PM25] Reading data...
19:52:06:901 -> [UART, PM25] Data not available.
19:52:06:901 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:901 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:901 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:901 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:922 -> [UART, PM25] Reading data...
19:52:06:922 -> [UART, PM25] Data not available.
19:52:06:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:922 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:922 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:943 -> [UART, PM25] Reading data...
19:52:06:943 -> [UART, PM25] Data not available.
19:52:06:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:943 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:943 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:963 -> [UART, PM25] Reading data...
19:52:06:964 -> [UART, PM25] Data not available.
19:52:06:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:964 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:964 -> [UART, PM25] Uart available, resetting event queue..
19:52:06:984 -> [UART, PM25] Reading data...
19:52:06:984 -> [UART, PM25] Data not available.
19:52:06:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:06:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:06:985 -> [UART, PM25] Uart available, clearing write errors..
19:52:06:985 -> [UART, PM25] Uart available, resetting event queue..

19:52:07:027 -> [UART, PM25] Data not available.
19:52:07:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:027 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:027 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:005 -> [UART, PM25] Reading data...19:52:07:026 -> [UART, PM25] Reading data...
19:52:07:006 -> [UART, PM25] Data not available.
19:52:07:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:006 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:006 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:048 -> [UART, PM25] Reading data...
19:52:07:048 -> [UART, PM25] Data not available.
19:52:07:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:048 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:048 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:068 -> [UART, PM25] Reading data...
19:52:07:069 -> [UART, PM25] Data not available.
19:52:07:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:069 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:069 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:089 -> [UART, PM25] Reading data...
19:52:07:090 -> [UART, PM25] Data not available.
19:52:07:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:090 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:090 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:110 -> [UART, PM25] Reading data...
19:52:07:111 -> [UART, PM25] Data not available.
19:52:07:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:111 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:111 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:131 -> [UART, PM25] Reading data...
19:52:07:132 -> [UART, PM25] Data not available.
19:52:07:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:132 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:132 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:153 -> [UART, PM25] Reading data...
19:52:07:153 -> [UART, PM25] Data not available.
19:52:07:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:153 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:153 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:173 -> [UART, PM25] Reading data...
19:52:07:174 -> [UART, PM25] Data not available.
19:52:07:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:174 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:174 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:194 -> [UART, PM25] Reading data...
19:52:07:195 -> [UART, PM25] Data not available.
19:52:07:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:195 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:195 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:218 -> [UART, PM25] Reading data...
19:52:07:218 -> [UART, PM25] Data not available.
19:52:07:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:218 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:218 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:236 -> [UART, PM25] Reading data...
19:52:07:237 -> [UART, PM25] Data not available.
19:52:07:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:237 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:237 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:258 -> [UART, PM25] Reading data...
19:52:07:258 -> [UART, PM25] Data not available.
19:52:07:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:258 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:258 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:279 -> [UART, PM25] Reading data...
19:52:07:279 -> [UART, PM25] Data not available.
19:52:07:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:279 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:279 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:299 -> [UART, PM25] Reading data...
19:52:07:300 -> [UART, PM25] Data not available.
19:52:07:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:300 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:300 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:320 -> [UART, PM25] Reading data...
19:52:07:321 -> [UART, PM25] Data not available.
19:52:07:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:321 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:321 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:341 -> [UART, PM25] Reading data...
19:52:07:341 -> [UART, PM25] Data not available.
19:52:07:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:342 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:342 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:362 -> [UART, PM25] Reading data...
19:52:07:363 -> [UART, PM25] Data not available.
19:52:07:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:363 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:363 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:383 -> [UART, PM25] Reading data...
19:52:07:384 -> [UART, PM25] Data not available.
19:52:07:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:384 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:384 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:404 -> [UART, PM25] Reading data...
19:52:07:405 -> [UART, PM25] Data not available.
19:52:07:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:405 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:405 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:425 -> [UART, PM25] Reading data...
19:52:07:426 -> [UART, PM25] Data not available.
19:52:07:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:426 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:426 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:446 -> [UART, PM25] Reading data...
19:52:07:448 -> [UART, PM25] Data not available.
19:52:07:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:448 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:448 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:468 -> [UART, PM25] Reading data...
19:52:07:468 -> [UART, PM25] Data not available.
19:52:07:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:468 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:468 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:489 -> [UART, PM25] Reading data...
19:52:07:489 -> [UART, PM25] Data not available.
19:52:07:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:489 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:489 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:509 -> [UART, PM25] Reading data...
19:52:07:510 -> [UART, PM25] Data not available.
19:52:07:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:510 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:510 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:530 -> [UART, PM25] Reading data...
19:52:07:531 -> [UART, PM25] Data not available.
19:52:07:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:531 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:531 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:552 -> [UART, PM25] Reading data...
19:52:07:552 -> [UART, PM25] Data not available.
19:52:07:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:552 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:552 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:573 -> [UART, PM25] Reading data...
19:52:07:573 -> [UART, PM25] Data not available.
19:52:07:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:573 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:573 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:594 -> [UART, PM25] Reading data...
19:52:07:594 -> [UART, PM25] Data not available.
19:52:07:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:594 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:594 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:614 -> [UART, PM25] Reading data...
19:52:07:615 -> [UART, PM25] Data not available.
19:52:07:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:615 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:615 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:636 -> [UART, PM25] Reading data...
19:52:07:636 -> [UART, PM25] Data not available.
19:52:07:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:636 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:636 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:657 -> [UART, PM25] Reading data...
19:52:07:657 -> [UART, PM25] Data not available.
19:52:07:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:657 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:657 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:678 -> [UART, PM25] Reading data...
19:52:07:678 -> [UART, PM25] Data not available.
19:52:07:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:678 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:678 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:698 -> [UART, PM25] Reading data...
19:52:07:701 -> [UART, PM25] Data not available.
19:52:07:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:701 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:701 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:729 -> [UART, PM25] Reading data...
19:52:07:730 -> [UART, PM25] Data not available.
19:52:07:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:730 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:730 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:740 -> [UART, PM25] Reading data...
19:52:07:741 -> [UART, PM25] Data not available.
19:52:07:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:741 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:741 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:762 -> [UART, PM25] Reading data...
19:52:07:762 -> [UART, PM25] Data not available.
19:52:07:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:782 -> [UART, PM25] Reading data...
19:52:07:783 -> [UART, PM25] Data not available.
19:52:07:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:783 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:783 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:803 -> [UART, PM25] Reading data...
19:52:07:804 -> [UART, PM25] Data not available.
19:52:07:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:804 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:804 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:824 -> [UART, PM25] Reading data...
19:52:07:825 -> [UART, PM25] Data not available.
19:52:07:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:825 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:825 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:845 -> [UART, PM25] Reading data...
19:52:07:846 -> [UART, PM25] Data not available.
19:52:07:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:846 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:846 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:867 -> [UART, PM25] Reading data...
19:52:07:867 -> [UART, PM25] Data not available.
19:52:07:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:867 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:867 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:887 -> [UART, PM25] Reading data...
19:52:07:888 -> [UART, PM25] Data not available.
19:52:07:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:888 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:888 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:908 -> [UART, PM25] Reading data...
19:52:07:909 -> [UART, PM25] Data not available.
19:52:07:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:909 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:909 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:929 -> [UART, PM25] Reading data...
19:52:07:929 -> [UART, PM25] Data not available.
19:52:07:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:930 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:930 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:950 -> [UART, PM25] Reading data...
19:52:07:951 -> [UART, PM25] Data not available.
19:52:07:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:951 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:951 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:972 -> [UART, PM25] Reading data...
19:52:07:972 -> [UART, PM25] Data not available.
19:52:07:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:972 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:972 -> [UART, PM25] Uart available, resetting event queue..
19:52:07:992 -> [UART, PM25] Reading data...
19:52:07:993 -> [UART, PM25] Data not available.
19:52:07:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:07:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:07:993 -> [UART, PM25] Uart available, clearing write errors..
19:52:07:993 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:013 -> [UART, PM25] Reading data...
19:52:08:014 -> [UART, PM25] Data not available.
19:52:08:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:014 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:014 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:034 -> [UART, PM25] Reading data...
19:52:08:035 -> [UART, PM25] Data not available.
19:52:08:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:035 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:035 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:056 -> [UART, PM25] Reading data...
19:52:08:056 -> [UART, PM25] Data not available.
19:52:08:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:056 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:056 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:076 -> [UART, PM25] Reading data...
19:52:08:077 -> [UART, PM25] Data not available.
19:52:08:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:097 -> [UART, PM25] Reading data...
19:52:08:098 -> [UART, PM25] Data not available.
19:52:08:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:119 -> [UART, PM25] Reading data...
19:52:08:119 -> [UART, PM25] Data not available.
19:52:08:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:119 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:119 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:139 -> [UART, PM25] Reading data...
19:52:08:140 -> [UART, PM25] Data not available.
19:52:08:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:140 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:140 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:160 -> [UART, PM25] Reading data...
19:52:08:161 -> [UART, PM25] Data not available.
19:52:08:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:182 -> [UART, PM25] Reading data...
19:52:08:182 -> [UART, PM25] Data not available.
19:52:08:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:182 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:182 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:202 -> [UART, PM25] Reading data...
19:52:08:203 -> [UART, PM25] Data not available.
19:52:08:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:203 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:203 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:224 -> [UART, PM25] Reading data...
19:52:08:228 -> [UART, PM25] Data not available.
19:52:08:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:228 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:228 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:249 -> [UART, PM25] Reading data...
19:52:08:249 -> [UART, PM25] Data not available.
19:52:08:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:250 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:250 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:265 -> [UART, PM25] Reading data...
19:52:08:265 -> [UART, PM25] Data not available.
19:52:08:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:266 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:266 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:286 -> [UART, PM25] Reading data...
19:52:08:287 -> [UART, PM25] Data not available.
19:52:08:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:287 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:287 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:307 -> [UART, PM25] Reading data...
19:52:08:308 -> [UART, PM25] Data not available.
19:52:08:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:328 -> [UART, PM25] Reading data...
19:52:08:329 -> [UART, PM25] Data not available.
19:52:08:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:329 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:329 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:350 -> [UART, PM25] Reading data...
19:52:08:350 -> [UART, PM25] Data not available.
19:52:08:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:350 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:350 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:371 -> [UART, PM25] Reading data...
19:52:08:371 -> [UART, PM25] Data not available.
19:52:08:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:371 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:371 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:391 -> [UART, PM25] Reading data...
19:52:08:392 -> [UART, PM25] Data not available.
19:52:08:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:392 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:392 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:412 -> [UART, PM25] Reading data...
19:52:08:413 -> [UART, PM25] Data not available.
19:52:08:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:413 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:413 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:433 -> [UART, PM25] Reading data...
19:52:08:434 -> [UART, PM25] Data not available.
19:52:08:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:434 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:434 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:454 -> [UART, PM25] Reading data...
19:52:08:455 -> [UART, PM25] Data not available.
19:52:08:455 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:455 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:455 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:455 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:475 -> [UART, PM25] Reading data...
19:52:08:476 -> [UART, PM25] Data not available.
19:52:08:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:476 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:476 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:496 -> [UART, PM25] Reading data...
19:52:08:497 -> [UART, PM25] Data not available.
19:52:08:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:497 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:497 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:532 -> [UART, PM25] Reading data...
19:52:08:545 -> [UART, PM25] Data not available.
19:52:08:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:545 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:545 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:545 -> [UART, PM25] Reading data...
19:52:08:545 -> [UART, PM25] Data not available.
19:52:08:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:545 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:545 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:559 -> [UART, PM25] Reading data...
19:52:08:560 -> [UART, PM25] Data not available.
19:52:08:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:560 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:560 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:581 -> [UART, PM25] Reading data...
19:52:08:581 -> [UART, PM25] Data not available.
19:52:08:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:581 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:581 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:601 -> [UART, PM25] Reading data...
19:52:08:602 -> [UART, PM25] Data not available.
19:52:08:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:623 -> [UART, PM25] Reading data...
19:52:08:623 -> [UART, PM25] Data not available.
19:52:08:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:646 -> [UART, PM25] Reading data...
19:52:08:649 -> [UART, PM25] Data not available.
19:52:08:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:649 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:649 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:664 -> [UART, PM25] Reading data...
19:52:08:665 -> [UART, PM25] Data not available.
19:52:08:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:665 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:665 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:686 -> [UART, PM25] Reading data...
19:52:08:686 -> [UART, PM25] Data not available.
19:52:08:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:686 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:686 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:706 -> [UART, PM25] Reading data...
19:52:08:707 -> [UART, PM25] Data not available.
19:52:08:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:707 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:707 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:727 -> [UART, PM25] Reading data...
19:52:08:728 -> [UART, PM25] Data not available.
19:52:08:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:728 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:728 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:748 -> [UART, PM25] Reading data...
19:52:08:760 -> [UART, PM25] Data not available.
19:52:08:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:760 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:760 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:770 -> [UART, PM25] Reading data...
19:52:08:770 -> [UART, PM25] Data not available.
19:52:08:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:770 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:770 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:790 -> [UART, PM25] Reading data...
19:52:08:791 -> [UART, PM25] Data not available.
19:52:08:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:791 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:791 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:811 -> [UART, PM25] Reading data...
19:52:08:812 -> [UART, PM25] Data not available.
19:52:08:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:832 -> [UART, PM25] Reading data...
19:52:08:833 -> [UART, PM25] Data not available.
19:52:08:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:833 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:833 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:854 -> [UART, PM25] Reading data...
19:52:08:854 -> [UART, PM25] Data not available.
19:52:08:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:875 -> [UART, PM25] Reading data...
19:52:08:875 -> [UART, PM25] Data not available.
19:52:08:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:896 -> [UART, PM25] Reading data...
19:52:08:896 -> [UART, PM25] Data not available.
19:52:08:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:917 -> [UART, PM25] Reading data...
19:52:08:917 -> [UART, PM25] Data not available.
19:52:08:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:917 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:917 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:937 -> [UART, PM25] Reading data...
19:52:08:938 -> [UART, PM25] Data not available.
19:52:08:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:958 -> [UART, PM25] Reading data...
19:52:08:959 -> [UART, PM25] Data not available.
19:52:08:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:959 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:959 -> [UART, PM25] Uart available, resetting event queue..
19:52:08:979 -> [UART, PM25] Reading data...
19:52:08:980 -> [UART, PM25] Data not available.
19:52:08:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:08:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:08:980 -> [UART, PM25] Uart available, clearing write errors..
19:52:08:980 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:001 -> [UART, PM25] Reading data...
19:52:09:001 -> [UART, PM25] Data not available.
19:52:09:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:021 -> [UART, PM25] Reading data...
19:52:09:022 -> [UART, PM25] Data not available.
19:52:09:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:042 -> [UART, PM25] Reading data...
19:52:09:043 -> [UART, PM25] Data not available.
19:52:09:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:063 -> [UART, PM25] Reading data...
19:52:09:064 -> [UART, PM25] Data not available.
19:52:09:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:064 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:064 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:085 -> [UART, PM25] Reading data...
19:52:09:085 -> [UART, PM25] Data not available.
19:52:09:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:085 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:085 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:106 -> [UART, PM25] Reading data...
19:52:09:106 -> [UART, PM25] Data not available.
19:52:09:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:106 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:106 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:126 -> [UART, PM25] Reading data...
19:52:09:127 -> [UART, PM25] Data not available.
19:52:09:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:127 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:127 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:147 -> [UART, PM25] Reading data...
19:52:09:148 -> [UART, PM25] Data not available.
19:52:09:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:148 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:148 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:168 -> [UART, PM25] Reading data...
19:52:09:169 -> [UART, PM25] Data not available.
19:52:09:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:189 -> [UART, PM25] Reading data...
19:52:09:190 -> [UART, PM25] Data not available.
19:52:09:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:190 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:190 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:211 -> [UART, PM25] Reading data...
19:52:09:211 -> [UART, PM25] Data not available.
19:52:09:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:211 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:211 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:232 -> [UART, PM25] Reading data...
19:52:09:232 -> [UART, PM25] Data not available.
19:52:09:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:252 -> [UART, PM25] Reading data...
19:52:09:253 -> [UART, PM25] Data not available.
19:52:09:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:290 -> [UART, PM25] Reading data...
19:52:09:293 -> [UART, PM25] Data not available.
19:52:09:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:293 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:293 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:294 -> [UART, PM25] Reading data...
19:52:09:295 -> [UART, PM25] Data not available.
19:52:09:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:315 -> [UART, PM25] Reading data...
19:52:09:316 -> [UART, PM25] Data not available.
19:52:09:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:316 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:316 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:336 -> [UART, PM25] Reading data...
19:52:09:337 -> [UART, PM25] Data not available.
19:52:09:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:357 -> [UART, PM25] Reading data...
19:52:09:358 -> [UART, PM25] Data not available.
19:52:09:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:378 -> [UART, PM25] Reading data...
19:52:09:379 -> [UART, PM25] Data not available.
19:52:09:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:400 -> [UART, PM25] Reading data...
19:52:09:400 -> [UART, PM25] Data not available.
19:52:09:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:400 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:400 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:421 -> [UART, PM25] Reading data...
19:52:09:421 -> [UART, PM25] Data not available.
19:52:09:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:421 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:421 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:441 -> [UART, PM25] Reading data...
19:52:09:442 -> [UART, PM25] Data not available.
19:52:09:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:442 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:442 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:462 -> [UART, PM25] Reading data...
19:52:09:463 -> [UART, PM25] Data not available.
19:52:09:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:463 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:463 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:483 -> [UART, PM25] Reading data...
19:52:09:484 -> [UART, PM25] Data not available.
19:52:09:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:484 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:484 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:505 -> [UART, PM25] Reading data...
19:52:09:505 -> [UART, PM25] Data not available.
19:52:09:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:505 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:505 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:525 -> [UART, PM25] Reading data...
19:52:09:526 -> [UART, PM25] Data not available.
19:52:09:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:546 -> [UART, PM25] Reading data...
19:52:09:547 -> [UART, PM25] Data not available.
19:52:09:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:547 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:547 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:568 -> [UART, PM25] Reading data...
19:52:09:568 -> [UART, PM25] Data not available.
19:52:09:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:568 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:568 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:588 -> [UART, PM25] Reading data...
19:52:09:589 -> [UART, PM25] Data not available.
19:52:09:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:589 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:589 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:610 -> [UART, PM25] Reading data...
19:52:09:610 -> [UART, PM25] Data not available.
19:52:09:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:610 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:610 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:630 -> [UART, PM25] Reading data...
19:52:09:631 -> [UART, PM25] Data not available.
19:52:09:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:631 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:631 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:652 -> [UART, PM25] Reading data...
19:52:09:652 -> [UART, PM25] Data not available.
19:52:09:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:672 -> [UART, PM25] Reading data...
19:52:09:673 -> [UART, PM25] Data not available.
19:52:09:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:673 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:673 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:693 -> [UART, PM25] Reading data...
19:52:09:694 -> [UART, PM25] Data not available.
19:52:09:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:694 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:694 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:715 -> [UART, PM25] Reading data...
19:52:09:715 -> [UART, PM25] Data not available.
19:52:09:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:715 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:715 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:735 -> [UART, PM25] Reading data...
19:52:09:736 -> [UART, PM25] Data not available.
19:52:09:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:756 -> [UART, PM25] Reading data...
19:52:09:757 -> [UART, PM25] Data not available.
19:52:09:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:757 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:757 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:777 -> [UART, PM25] Reading data...
19:52:09:778 -> [UART, PM25] Data not available.
19:52:09:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:778 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:778 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:807 -> [UART, PM25] Reading data...
19:52:09:808 -> [UART, PM25] Data not available.
19:52:09:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:808 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:808 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:819 -> [UART, PM25] Reading data...
19:52:09:820 -> [UART, PM25] Data not available.
19:52:09:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:820 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:820 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:840 -> [UART, PM25] Reading data...
19:52:09:841 -> [UART, PM25] Data not available.
19:52:09:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:841 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:841 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:861 -> [UART, PM25] Reading data...
19:52:09:862 -> [UART, PM25] Data not available.
19:52:09:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:862 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:862 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:882 -> [UART, PM25] Reading data...
19:52:09:883 -> [UART, PM25] Data not available.
19:52:09:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:883 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:883 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:903 -> [UART, PM25] Reading data...
19:52:09:904 -> [UART, PM25] Data not available.
19:52:09:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:904 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:904 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:924 -> [UART, PM25] Reading data...
19:52:09:925 -> [UART, PM25] Data not available.
19:52:09:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:945 -> [UART, PM25] Reading data...
19:52:09:947 -> [UART, PM25] Data not available.
19:52:09:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:947 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:947 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:966 -> [UART, PM25] Reading data...
19:52:09:967 -> [UART, PM25] Data not available.
19:52:09:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:09:987 -> [UART, PM25] Reading data...
19:52:09:988 -> [UART, PM25] Data not available.
19:52:09:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:09:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:09:988 -> [UART, PM25] Uart available, clearing write errors..
19:52:09:988 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:008 -> [UART, PM25] Reading data...
19:52:10:009 -> [UART, PM25] Data not available.
19:52:10:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:029 -> [UART, PM25] Reading data...
19:52:10:030 -> [UART, PM25] Data not available.
19:52:10:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:030 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:030 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:050 -> [UART, PM25] Reading data...
19:52:10:051 -> [UART, PM25] Data not available.
19:52:10:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:051 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:051 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:071 -> [UART, PM25] Reading data...
19:52:10:072 -> [UART, PM25] Data not available.
19:52:10:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:072 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:072 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:092 -> [UART, PM25] Reading data...
19:52:10:093 -> [UART, PM25] Data not available.
19:52:10:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:093 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:093 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:114 -> [UART, PM25] Reading data...
19:52:10:114 -> [UART, PM25] Data not available.
19:52:10:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:114 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:114 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:135 -> [UART, PM25] Reading data...
19:52:10:135 -> [UART, PM25] Data not available.
19:52:10:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:135 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:135 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:156 -> [UART, PM25] Reading data...
19:52:10:156 -> [UART, PM25] Data not available.
19:52:10:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:176 -> [UART, PM25] Reading data...
19:52:10:177 -> [UART, PM25] Data not available.
19:52:10:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:177 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:177 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:197 -> [UART, PM25] Reading data...
19:52:10:198 -> [UART, PM25] Data not available.
19:52:10:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:219 -> [UART, PM25] Reading data...
19:52:10:219 -> [UART, PM25] Data not available.
19:52:10:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:219 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:219 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:239 -> [UART, PM25] Reading data...
19:52:10:240 -> [UART, PM25] Data not available.
19:52:10:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:240 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:240 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:260 -> [UART, PM25] Reading data...
19:52:10:261 -> [UART, PM25] Data not available.
19:52:10:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:261 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:261 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:281 -> [UART, PM25] Reading data...
19:52:10:282 -> [UART, PM25] Data not available.
19:52:10:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:282 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:282 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:302 -> [UART, PM25] Reading data...
19:52:10:303 -> [UART, PM25] Data not available.
19:52:10:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:353 -> [UART, PM25] Reading data...
19:52:10:361 -> [UART, PM25] Data not available.
19:52:10:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:361 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:361 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:361 -> [UART, PM25] Reading data...
19:52:10:361 -> [UART, PM25] Data not available.
19:52:10:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:361 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:361 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:365 -> [UART, PM25] Reading data...
19:52:10:366 -> [UART, PM25] Data not available.
19:52:10:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:366 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:366 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:386 -> [UART, PM25] Reading data...
19:52:10:387 -> [UART, PM25] Data not available.
19:52:10:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:387 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:387 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:407 -> [UART, PM25] Reading data...
19:52:10:408 -> [UART, PM25] Data not available.
19:52:10:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:408 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:408 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:428 -> [UART, PM25] Reading data...
19:52:10:429 -> [UART, PM25] Data not available.
19:52:10:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:429 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:429 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:449 -> [UART, PM25] Reading data...
19:52:10:450 -> [UART, PM25] Data not available.
19:52:10:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:450 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:450 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:470 -> [UART, PM25] Reading data...
19:52:10:471 -> [UART, PM25] Data not available.
19:52:10:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:471 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:471 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:491 -> [UART, PM25] Reading data...
19:52:10:492 -> [UART, PM25] Data not available.
19:52:10:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:492 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:492 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:512 -> [UART, PM25] Reading data...
19:52:10:513 -> [UART, PM25] Data not available.
19:52:10:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:513 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:513 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:534 -> [UART, PM25] Reading data...
19:52:10:534 -> [UART, PM25] Data not available.
19:52:10:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:534 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:534 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:554 -> [UART, PM25] Reading data...
19:52:10:555 -> [UART, PM25] Data not available.
19:52:10:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:555 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:555 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:575 -> [UART, PM25] Reading data...
19:52:10:576 -> [UART, PM25] Data not available.
19:52:10:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:576 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:576 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:596 -> [UART, PM25] Reading data...
19:52:10:597 -> [UART, PM25] Data not available.
19:52:10:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:597 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:597 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:617 -> [UART, PM25] Reading data...
19:52:10:618 -> [UART, PM25] Data not available.
19:52:10:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:618 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:618 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:638 -> [UART, PM25] Reading data...
19:52:10:639 -> [UART, PM25] Data not available.
19:52:10:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:639 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:639 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:659 -> [UART, PM25] Reading data...
19:52:10:660 -> [UART, PM25] Data not available.
19:52:10:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:660 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:660 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:680 -> [UART, PM25] Reading data...
19:52:10:681 -> [UART, PM25] Data not available.
19:52:10:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:681 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:681 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:701 -> [UART, PM25] Reading data...
19:52:10:702 -> [UART, PM25] Data not available.
19:52:10:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:702 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:702 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:722 -> [UART, PM25] Reading data...
19:52:10:723 -> [UART, PM25] Data not available.
19:52:10:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:723 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:723 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:743 -> [UART, PM25] Reading data...
19:52:10:744 -> [UART, PM25] Data not available.
19:52:10:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:744 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:744 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:764 -> [UART, PM25] Reading data...
19:52:10:765 -> [UART, PM25] Data not available.
19:52:10:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:765 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:765 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:785 -> [UART, PM25] Reading data...
19:52:10:786 -> [UART, PM25] Data not available.
19:52:10:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:786 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:786 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:806 -> [UART, PM25] Reading data...
19:52:10:807 -> [UART, PM25] Data not available.
19:52:10:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:807 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:807 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:827 -> [UART, PM25] Reading data...
19:52:10:828 -> [UART, PM25] Data not available.
19:52:10:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:828 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:828 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:848 -> [UART, PM25] Reading data...
19:52:10:849 -> [UART, PM25] Data not available.
19:52:10:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:849 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:849 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:873 -> [UART, PM25] Reading data...
19:52:10:875 -> [UART, PM25] Data not available.
19:52:10:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:890 -> [UART, PM25] Reading data...
19:52:10:891 -> [UART, PM25] Data not available.
19:52:10:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:891 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:891 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:911 -> [UART, PM25] Reading data...
19:52:10:912 -> [UART, PM25] Data not available.
19:52:10:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:912 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:912 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:933 -> [UART, PM25] Reading data...
19:52:10:933 -> [UART, PM25] Data not available.
19:52:10:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:933 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:933 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:953 -> [UART, PM25] Reading data...
19:52:10:954 -> [UART, PM25] Data not available.
19:52:10:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:10:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:10:954 -> [UART, PM25] Uart available, clearing write errors..
19:52:10:954 -> [UART, PM25] Uart available, resetting event queue..
19:52:10:954 -> PING!
19:52:11:168 -> [UART, PM25] Reading data...
19:52:11:168 -> [UART, PM25] Data not available.
19:52:11:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:168 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:168 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:188 -> [UART, PM25] Reading data...
19:52:11:189 -> [UART, PM25] Data not available.
19:52:11:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:189 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:189 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:209 -> [UART, PM25] Reading data...
19:52:11:210 -> [UART, PM25] Data not available.
19:52:11:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:210 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:210 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:231 -> [UART, PM25] Reading data...
19:52:11:232 -> [UART, PM25] Data not available.
19:52:11:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:251 -> [UART, PM25] Reading data...
19:52:11:252 -> [UART, PM25] Data not available.
19:52:11:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:252 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:252 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:272 -> [UART, PM25] Reading data...
19:52:11:273 -> [UART, PM25] Data not available.
19:52:11:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:273 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:273 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:293 -> [UART, PM25] Reading data...
19:52:11:294 -> [UART, PM25] Data not available.
19:52:11:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:294 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:294 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:314 -> [UART, PM25] Reading data...
19:52:11:315 -> [UART, PM25] Data not available.
19:52:11:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:315 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:315 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:335 -> [UART, PM25] Reading data...
19:52:11:336 -> [UART, PM25] Data not available.
19:52:11:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:336 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:336 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:357 -> [UART, PM25] Reading data...
19:52:11:357 -> [UART, PM25] Data not available.
19:52:11:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:357 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:357 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:389 -> [UART, PM25] Reading data...
19:52:11:390 -> [UART, PM25] Data not available.
19:52:11:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:390 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:390 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:399 -> [UART, PM25] Reading data...
19:52:11:399 -> [UART, PM25] Data not available.
19:52:11:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:399 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:399 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:420 -> [UART, PM25] Reading data...
19:52:11:420 -> [UART, PM25] Data not available.
19:52:11:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:420 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:420 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:440 -> [UART, PM25] Reading data...
19:52:11:441 -> [UART, PM25] Data not available.
19:52:11:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:441 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:441 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:461 -> [UART, PM25] Reading data...
19:52:11:462 -> [UART, PM25] Data not available.
19:52:11:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:462 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:462 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:483 -> [UART, PM25] Reading data...
19:52:11:483 -> [UART, PM25] Data not available.
19:52:11:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:483 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:483 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:503 -> [UART, PM25] Reading data...
19:52:11:504 -> [UART, PM25] Data not available.
19:52:11:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:504 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:504 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:524 -> [UART, PM25] Reading data...
19:52:11:525 -> [UART, PM25] Data not available.
19:52:11:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:525 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:525 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:545 -> [UART, PM25] Reading data...
19:52:11:546 -> [UART, PM25] Data not available.
19:52:11:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:546 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:546 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:566 -> [UART, PM25] Reading data...
19:52:11:567 -> [UART, PM25] Data not available.
19:52:11:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:567 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:567 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:587 -> [UART, PM25] Reading data...
19:52:11:588 -> [UART, PM25] Data not available.
19:52:11:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:588 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:588 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:608 -> [UART, PM25] Reading data...
19:52:11:609 -> [UART, PM25] Data not available.
19:52:11:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:609 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:609 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:629 -> [UART, PM25] Reading data...
19:52:11:630 -> [UART, PM25] Data not available.
19:52:11:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:630 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:630 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:650 -> [UART, PM25] Reading data...
19:52:11:651 -> [UART, PM25] Data not available.
19:52:11:651 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:651 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:651 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:651 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:671 -> [UART, PM25] Reading data...
19:52:11:672 -> [UART, PM25] Data not available.
19:52:11:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:672 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:672 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:692 -> [UART, PM25] Reading data...
19:52:11:693 -> [UART, PM25] Data not available.
19:52:11:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:693 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:693 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:713 -> [UART, PM25] Reading data...
19:52:11:714 -> [UART, PM25] Data not available.
19:52:11:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:714 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:714 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:735 -> [UART, PM25] Reading data...
19:52:11:735 -> [UART, PM25] Data not available.
19:52:11:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:735 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:735 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:756 -> [UART, PM25] Reading data...
19:52:11:756 -> [UART, PM25] Data not available.
19:52:11:756 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:756 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:756 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:756 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:776 -> [UART, PM25] Reading data...
19:52:11:777 -> [UART, PM25] Data not available.
19:52:11:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:777 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:777 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:797 -> [UART, PM25] Reading data...
19:52:11:802 -> [UART, PM25] Data not available.
19:52:11:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:802 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:802 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:818 -> [UART, PM25] Reading data...
19:52:11:819 -> [UART, PM25] Data not available.
19:52:11:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:819 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:819 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:839 -> [UART, PM25] Reading data...
19:52:11:840 -> [UART, PM25] Data not available.
19:52:11:840 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:840 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:840 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:860 -> [UART, PM25] Reading data...
19:52:11:861 -> [UART, PM25] Data not available.
19:52:11:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:861 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:861 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:881 -> [UART, PM25] Reading data...
19:52:11:882 -> [UART, PM25] Data not available.
19:52:11:882 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:882 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:882 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:882 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:912 -> [UART, PM25] Reading data...
19:52:11:913 -> [UART, PM25] Data not available.
19:52:11:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:913 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:913 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:923 -> [UART, PM25] Reading data...
19:52:11:924 -> [UART, PM25] Data not available.
19:52:11:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:924 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:924 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:944 -> [UART, PM25] Reading data...
19:52:11:945 -> [UART, PM25] Data not available.
19:52:11:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:945 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:945 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:966 -> [UART, PM25] Reading data...
19:52:11:966 -> [UART, PM25] Data not available.
19:52:11:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:966 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:966 -> [UART, PM25] Uart available, resetting event queue..
19:52:11:986 -> [UART, PM25] Reading data...
19:52:11:987 -> [UART, PM25] Data not available.
19:52:11:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:11:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:11:987 -> [UART, PM25] Uart available, clearing write errors..
19:52:11:987 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:008 -> [UART, PM25] Reading data...
19:52:12:008 -> [UART, PM25] Data not available.
19:52:12:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:008 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:008 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:028 -> [UART, PM25] Reading data...
19:52:12:029 -> [UART, PM25] Data not available.
19:52:12:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:029 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:029 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:050 -> [UART, PM25] Reading data...
19:52:12:050 -> [UART, PM25] Data not available.
19:52:12:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:050 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:050 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:070 -> [UART, PM25] Reading data...
19:52:12:071 -> [UART, PM25] Data not available.
19:52:12:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:071 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:071 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:091 -> [UART, PM25] Reading data...
19:52:12:092 -> [UART, PM25] Data not available.
19:52:12:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:092 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:092 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:113 -> [UART, PM25] Reading data...
19:52:12:113 -> [UART, PM25] Data not available.
19:52:12:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:113 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:113 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:152 -> [UART, PM25] Reading data...
19:52:12:156 -> [UART, PM25] Data not available.
19:52:12:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:156 -> [UART, PM25] Reading data...
19:52:12:156 -> [UART, PM25] Data not available.
19:52:12:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:175 -> [UART, PM25] Reading data...
19:52:12:176 -> [UART, PM25] Data not available.
19:52:12:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:176 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:176 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:198 -> [UART, PM25] Reading data...
19:52:12:198 -> [UART, PM25] Data not available.
19:52:12:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:217 -> [UART, PM25] Reading data...
19:52:12:218 -> [UART, PM25] Data not available.
19:52:12:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:218 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:218 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:238 -> [UART, PM25] Reading data...
19:52:12:239 -> [UART, PM25] Data not available.
19:52:12:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:239 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:239 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:259 -> [UART, PM25] Reading data...
19:52:12:260 -> [UART, PM25] Data not available.
19:52:12:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:260 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:260 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:281 -> [UART, PM25] Reading data...
19:52:12:281 -> [UART, PM25] Data not available.
19:52:12:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:281 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:281 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:301 -> [UART, PM25] Reading data...
19:52:12:302 -> [UART, PM25] Data not available.
19:52:12:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:302 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:302 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:322 -> [UART, PM25] Reading data...
19:52:12:323 -> [UART, PM25] Data not available.
19:52:12:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:323 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:323 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:344 -> [UART, PM25] Reading data...
19:52:12:344 -> [UART, PM25] Data not available.
19:52:12:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:344 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:344 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:365 -> [UART, PM25] Reading data...
19:52:12:365 -> [UART, PM25] Data not available.
19:52:12:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:365 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:365 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:386 -> [UART, PM25] Reading data...
19:52:12:386 -> [UART, PM25] Data not available.
19:52:12:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:386 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:386 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:406 -> [UART, PM25] Reading data...
19:52:12:407 -> [UART, PM25] Data not available.
19:52:12:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:407 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:407 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:427 -> [UART, PM25] Reading data...
19:52:12:428 -> [UART, PM25] Data not available.
19:52:12:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:428 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:428 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:448 -> [UART, PM25] Reading data...
19:52:12:449 -> [UART, PM25] Data not available.
19:52:12:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:449 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:449 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:470 -> [UART, PM25] Reading data...
19:52:12:470 -> [UART, PM25] Data not available.
19:52:12:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:470 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:470 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:491 -> [UART, PM25] Reading data...
19:52:12:491 -> [UART, PM25] Data not available.
19:52:12:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:491 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:491 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:511 -> [UART, PM25] Reading data...
19:52:12:512 -> [UART, PM25] Data not available.
19:52:12:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:512 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:512 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:532 -> [UART, PM25] Reading data...
19:52:12:533 -> [UART, PM25] Data not available.
19:52:12:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:533 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:533 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:553 -> [UART, PM25] Reading data...
19:52:12:554 -> [UART, PM25] Data not available.
19:52:12:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:554 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:554 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:575 -> [UART, PM25] Reading data...
19:52:12:575 -> [UART, PM25] Data not available.
19:52:12:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:575 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:575 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:596 -> [UART, PM25] Reading data...
19:52:12:596 -> [UART, PM25] Data not available.
19:52:12:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:596 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:596 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:617 -> [UART, PM25] Reading data...
19:52:12:617 -> [UART, PM25] Data not available.
19:52:12:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:617 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:617 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:637 -> [UART, PM25] Reading data...
19:52:12:638 -> [UART, PM25] Data not available.
19:52:12:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:638 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:638 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:658 -> [UART, PM25] Reading data...
19:52:12:659 -> [UART, PM25] Data not available.
19:52:12:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:659 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:659 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:679 -> [UART, PM25] Reading data...
19:52:12:681 -> [UART, PM25] Data not available.
19:52:12:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:681 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:681 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:700 -> [UART, PM25] Reading data...
19:52:12:701 -> [UART, PM25] Data not available.
19:52:12:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:701 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:701 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:721 -> [UART, PM25] Reading data...
19:52:12:722 -> [UART, PM25] Data not available.
19:52:12:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:722 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:722 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:742 -> [UART, PM25] Reading data...
19:52:12:743 -> [UART, PM25] Data not available.
19:52:12:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:743 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:743 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:763 -> [UART, PM25] Reading data...
19:52:12:764 -> [UART, PM25] Data not available.
19:52:12:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:764 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:764 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:785 -> [UART, PM25] Reading data...
19:52:12:785 -> [UART, PM25] Data not available.
19:52:12:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:785 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:785 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:805 -> [UART, PM25] Reading data...
19:52:12:806 -> [UART, PM25] Data not available.
19:52:12:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:806 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:806 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:826 -> [UART, PM25] Reading data...
19:52:12:827 -> [UART, PM25] Data not available.
19:52:12:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:827 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:827 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:847 -> [UART, PM25] Reading data...
19:52:12:848 -> [UART, PM25] Data not available.
19:52:12:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:848 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:848 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:868 -> [UART, PM25] Reading data...
19:52:12:869 -> [UART, PM25] Data not available.
19:52:12:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:869 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:869 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:890 -> [UART, PM25] Reading data...
19:52:12:890 -> [UART, PM25] Data not available.
19:52:12:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:890 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:890 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:910 -> [UART, PM25] Reading data...
19:52:12:911 -> [UART, PM25] Data not available.
19:52:12:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:911 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:911 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:944 -> [UART, PM25] Reading data...
19:52:12:945 -> [UART, PM25] Data not available.
19:52:12:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:945 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:945 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:952 -> [UART, PM25] Reading data...
19:52:12:952 -> [UART, PM25] Data not available.
19:52:12:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:953 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:953 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:973 -> [UART, PM25] Reading data...
19:52:12:974 -> [UART, PM25] Data not available.
19:52:12:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:974 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:974 -> [UART, PM25] Uart available, resetting event queue..
19:52:12:995 -> [UART, PM25] Reading data...
19:52:12:995 -> [UART, PM25] Data not available.
19:52:12:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:12:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:12:995 -> [UART, PM25] Uart available, clearing write errors..
19:52:12:995 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:015 -> [UART, PM25] Reading data...
19:52:13:016 -> [UART, PM25] Data not available.
19:52:13:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:016 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:016 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:036 -> [UART, PM25] Reading data...
19:52:13:039 -> [UART, PM25] Data not available.
19:52:13:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:057 -> [UART, PM25] Reading data...
19:52:13:058 -> [UART, PM25] Data not available.
19:52:13:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:058 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:058 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:078 -> [UART, PM25] Reading data...
19:52:13:079 -> [UART, PM25] Data not available.
19:52:13:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:079 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:079 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:099 -> [UART, PM25] Reading data...
19:52:13:102 -> [UART, PM25] Data not available.
19:52:13:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:102 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:102 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:120 -> [UART, PM25] Reading data...
19:52:13:121 -> [UART, PM25] Data not available.
19:52:13:121 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:121 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:121 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:121 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:141 -> [UART, PM25] Reading data...
19:52:13:142 -> [UART, PM25] Data not available.
19:52:13:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:142 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:142 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:162 -> [UART, PM25] Reading data...
19:52:13:163 -> [UART, PM25] Data not available.
19:52:13:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:163 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:163 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:183 -> [UART, PM25] Reading data...
19:52:13:184 -> [UART, PM25] Data not available.
19:52:13:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:184 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:184 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:204 -> [UART, PM25] Reading data...
19:52:13:205 -> [UART, PM25] Data not available.
19:52:13:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:205 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:205 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:225 -> [UART, PM25] Reading data...
19:52:13:226 -> [UART, PM25] Data not available.
19:52:13:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:226 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:226 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:246 -> [UART, PM25] Reading data...
19:52:13:247 -> [UART, PM25] Data not available.
19:52:13:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:247 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:247 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:267 -> [UART, PM25] Reading data...
19:52:13:268 -> [UART, PM25] Data not available.
19:52:13:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:268 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:268 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:289 -> [UART, PM25] Reading data...
19:52:13:289 -> [UART, PM25] Data not available.
19:52:13:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:289 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:289 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:309 -> [UART, PM25] Reading data...
19:52:13:310 -> [UART, PM25] Data not available.
19:52:13:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:310 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:310 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:330 -> [UART, PM25] Reading data...
19:52:13:331 -> [UART, PM25] Data not available.
19:52:13:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:331 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:331 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:351 -> [UART, PM25] Reading data...
19:52:13:352 -> [UART, PM25] Data not available.
19:52:13:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:352 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:352 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:372 -> [UART, PM25] Reading data...
19:52:13:373 -> [UART, PM25] Data not available.
19:52:13:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:373 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:373 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:393 -> [UART, PM25] Reading data...
19:52:13:394 -> [UART, PM25] Data not available.
19:52:13:394 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:394 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:394 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:394 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:414 -> [UART, PM25] Reading data...
19:52:13:415 -> [UART, PM25] Data not available.
19:52:13:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:415 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:415 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:435 -> [UART, PM25] Reading data...
19:52:13:436 -> [UART, PM25] Data not available.
19:52:13:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:436 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:436 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:460 -> [UART, PM25] Reading data...
19:52:13:461 -> [UART, PM25] Data not available.
19:52:13:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:461 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:461 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:477 -> [UART, PM25] Reading data...
19:52:13:478 -> [UART, PM25] Data not available.
19:52:13:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:478 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:478 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:498 -> [UART, PM25] Reading data...
19:52:13:499 -> [UART, PM25] Data not available.
19:52:13:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:499 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:499 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:519 -> [UART, PM25] Reading data...
19:52:13:520 -> [UART, PM25] Data not available.
19:52:13:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:520 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:520 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:540 -> [UART, PM25] Reading data...
19:52:13:541 -> [UART, PM25] Data not available.
19:52:13:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:541 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:541 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:561 -> [UART, PM25] Reading data...
19:52:13:562 -> [UART, PM25] Data not available.
19:52:13:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:562 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:562 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:582 -> [UART, PM25] Reading data...
19:52:13:583 -> [UART, PM25] Data not available.
19:52:13:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:583 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:583 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:604 -> [UART, PM25] Reading data...
19:52:13:604 -> [UART, PM25] Data not available.
19:52:13:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:604 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:604 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:624 -> [UART, PM25] Reading data...
19:52:13:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:625 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:625 -> [UART, PM25] Uart available, resetting event queue..

19:52:13:625 -> [UART, PM25] Data not available.19:52:13:645 -> [UART, PM25] Reading data...
19:52:13:646 -> [UART, PM25] Data not available.
19:52:13:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:646 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:646 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:666 -> [UART, PM25] Reading data...
19:52:13:667 -> [UART, PM25] Data not available.
19:52:13:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:667 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:667 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:691 -> [UART, PM25] Reading data...
19:52:13:692 -> [UART, PM25] Data not available.
19:52:13:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:692 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:692 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:708 -> [UART, PM25] Reading data...
19:52:13:709 -> [UART, PM25] Data not available.
19:52:13:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:709 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:709 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:729 -> [UART, PM25] Reading data...
19:52:13:730 -> [UART, PM25] Data not available.
19:52:13:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:730 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:730 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:750 -> [UART, PM25] Reading data...
19:52:13:751 -> [UART, PM25] Data not available.
19:52:13:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:751 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:751 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:771 -> [UART, PM25] Reading data...
19:52:13:772 -> [UART, PM25] Data not available.
19:52:13:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:772 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:772 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:792 -> [UART, PM25] Reading data...
19:52:13:793 -> [UART, PM25] Data not available.
19:52:13:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:793 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:793 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:813 -> [UART, PM25] Reading data...
19:52:13:814 -> [UART, PM25] Data not available.
19:52:13:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:814 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:814 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:834 -> [UART, PM25] Reading data...
19:52:13:835 -> [UART, PM25] Data not available.
19:52:13:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:855 -> [UART, PM25] Reading data...
19:52:13:855 -> [UART, PM25] Data not available.
19:52:13:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:856 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:856 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:876 -> [UART, PM25] Reading data...
19:52:13:877 -> [UART, PM25] Data not available.
19:52:13:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:877 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:877 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:922 -> [UART, PM25] Reading data...
19:52:13:941 -> [UART, PM25] Data not available.
19:52:13:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:941 -> [UART, PM25] Reading data...
19:52:13:941 -> [UART, PM25] Data not available.
19:52:13:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:941 -> [UART, PM25] Reading data...
19:52:13:941 -> [UART, PM25] Data not available.
19:52:13:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:975 -> [UART, PM25] Reading data...
19:52:13:976 -> [UART, PM25] Data not available.
19:52:13:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:976 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:976 -> [UART, PM25] Uart available, resetting event queue..
19:52:13:981 -> [UART, PM25] Reading data...
19:52:13:982 -> [UART, PM25] Data not available.
19:52:13:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:13:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:13:982 -> [UART, PM25] Uart available, clearing write errors..
19:52:13:982 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:003 -> [UART, PM25] Reading data...
19:52:14:003 -> [UART, PM25] Data not available.
19:52:14:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:003 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:003 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:023 -> [UART, PM25] Reading data...
19:52:14:024 -> [UART, PM25] Data not available.
19:52:14:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:024 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:024 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:044 -> [UART, PM25] Reading data...
19:52:14:045 -> [UART, PM25] Data not available.
19:52:14:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:045 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:045 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:065 -> [UART, PM25] Reading data...
19:52:14:066 -> [UART, PM25] Data not available.
19:52:14:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:066 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:066 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:086 -> [UART, PM25] Reading data...
19:52:14:087 -> [UART, PM25] Data not available.
19:52:14:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:087 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:087 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:108 -> [UART, PM25] Reading data...
19:52:14:108 -> [UART, PM25] Data not available.
19:52:14:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:108 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:108 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:128 -> [UART, PM25] Reading data...
19:52:14:129 -> [UART, PM25] Data not available.
19:52:14:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:129 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:129 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:149 -> [UART, PM25] Reading data...
19:52:14:150 -> [UART, PM25] Data not available.
19:52:14:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:150 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:150 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:170 -> [UART, PM25] Reading data...
19:52:14:171 -> [UART, PM25] Data not available.
19:52:14:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:171 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:171 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:191 -> [UART, PM25] Reading data...
19:52:14:192 -> [UART, PM25] Data not available.
19:52:14:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:192 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:192 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:212 -> [UART, PM25] Reading data...
19:52:14:213 -> [UART, PM25] Data not available.
19:52:14:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:213 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:213 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:233 -> [UART, PM25] Reading data...
19:52:14:234 -> [UART, PM25] Data not available.
19:52:14:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:234 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:234 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:254 -> [UART, PM25] Reading data...
19:52:14:255 -> [UART, PM25] Data not available.
19:52:14:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:255 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:255 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:275 -> [UART, PM25] Reading data...
19:52:14:276 -> [UART, PM25] Data not available.
19:52:14:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:276 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:276 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:296 -> [UART, PM25] Reading data...
19:52:14:297 -> [UART, PM25] Data not available.
19:52:14:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:297 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:297 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:317 -> [UART, PM25] Reading data...
19:52:14:318 -> [UART, PM25] Data not available.
19:52:14:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:318 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:318 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:338 -> [UART, PM25] Reading data...
19:52:14:339 -> [UART, PM25] Data not available.
19:52:14:339 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:339 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:339 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:339 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:359 -> [UART, PM25] Reading data...
19:52:14:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:381 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:381 -> [UART, PM25] Uart available, resetting event queue..

19:52:14:360 -> [UART, PM25] Data not available.
19:52:14:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:360 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:360 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:380 -> [UART, PM25] Reading data...
19:52:14:381 -> [UART, PM25] Data not available.19:52:14:402 -> [UART, PM25] Reading data...
19:52:14:403 -> [UART, PM25] Data not available.
19:52:14:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:403 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:403 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:422 -> [UART, PM25] Reading data...
19:52:14:423 -> [UART, PM25] Data not available.
19:52:14:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:423 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:423 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:443 -> [UART, PM25] Reading data...
19:52:14:443 -> [UART, PM25] Data not available.
19:52:14:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:444 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:444 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:464 -> [UART, PM25] Reading data...
19:52:14:465 -> [UART, PM25] Data not available.
19:52:14:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:465 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:465 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:496 -> [UART, PM25] Reading data...
19:52:14:496 -> [UART, PM25] Data not available.
19:52:14:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:496 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:496 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:506 -> [UART, PM25] Reading data...
19:52:14:507 -> [UART, PM25] Data not available.
19:52:14:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:507 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:507 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:528 -> [UART, PM25] Reading data...
19:52:14:528 -> [UART, PM25] Data not available.
19:52:14:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:528 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:528 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:548 -> [UART, PM25] Reading data...
19:52:14:549 -> [UART, PM25] Data not available.
19:52:14:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:549 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:549 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:570 -> [UART, PM25] Reading data...
19:52:14:570 -> [UART, PM25] Data not available.
19:52:14:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:570 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:570 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:590 -> [UART, PM25] Reading data...
19:52:14:591 -> [UART, PM25] Data not available.
19:52:14:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:591 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:591 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:611 -> [UART, PM25] Reading data...
19:52:14:612 -> [UART, PM25] Data not available.
19:52:14:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:612 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:612 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:632 -> [UART, PM25] Reading data...
19:52:14:633 -> [UART, PM25] Data not available.
19:52:14:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:633 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:633 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:653 -> [UART, PM25] Reading data...
19:52:14:654 -> [UART, PM25] Data not available.
19:52:14:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:654 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:654 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:674 -> [UART, PM25] Reading data...
19:52:14:676 -> [UART, PM25] Data not available.
19:52:14:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:676 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:676 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:695 -> [UART, PM25] Reading data...
19:52:14:696 -> [UART, PM25] Data not available.
19:52:14:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:696 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:696 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:716 -> [UART, PM25] Reading data...
19:52:14:717 -> [UART, PM25] Data not available.
19:52:14:717 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:717 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:717 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:717 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:737 -> [UART, PM25] Reading data...
19:52:14:737 -> [UART, PM25] Data not available.
19:52:14:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:738 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:738 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:758 -> [UART, PM25] Reading data...
19:52:14:759 -> [UART, PM25] Data not available.
19:52:14:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:759 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:759 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:782 -> [UART, PM25] Reading data...
19:52:14:783 -> [UART, PM25] Data not available.
19:52:14:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:783 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:783 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:800 -> [UART, PM25] Reading data...
19:52:14:801 -> [UART, PM25] Data not available.
19:52:14:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:801 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:801 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:822 -> [UART, PM25] Reading data...
19:52:14:822 -> [UART, PM25] Data not available.
19:52:14:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:822 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:822 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:843 -> [UART, PM25] Reading data...
19:52:14:843 -> [UART, PM25] Data not available.
19:52:14:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:843 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:843 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:864 -> [UART, PM25] Reading data...
19:52:14:864 -> [UART, PM25] Data not available.
19:52:14:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:864 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:864 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:884 -> [UART, PM25] Reading data...
19:52:14:884 -> [UART, PM25] Data not available.
19:52:14:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:885 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:885 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:905 -> [UART, PM25] Reading data...
19:52:14:906 -> [UART, PM25] Data not available.
19:52:14:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:906 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:906 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:926 -> [UART, PM25] Reading data...
19:52:14:927 -> [UART, PM25] Data not available.
19:52:14:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:927 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:927 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:947 -> [UART, PM25] Reading data...
19:52:14:948 -> [UART, PM25] Data not available.
19:52:14:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:948 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:948 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:968 -> [UART, PM25] Reading data...
19:52:14:969 -> [UART, PM25] Data not available.
19:52:14:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:969 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:969 -> [UART, PM25] Uart available, resetting event queue..
19:52:14:989 -> [UART, PM25] Reading data...
19:52:14:990 -> [UART, PM25] Data not available.
19:52:14:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:14:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:14:990 -> [UART, PM25] Uart available, clearing write errors..
19:52:14:990 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:020 -> [UART, PM25] Reading data...
19:52:15:020 -> [UART, PM25] Data not available.
19:52:15:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:021 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:021 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:032 -> [UART, PM25] Reading data...
19:52:15:032 -> [UART, PM25] Data not available.
19:52:15:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:032 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:032 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:052 -> [UART, PM25] Reading data...
19:52:15:053 -> [UART, PM25] Data not available.
19:52:15:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:053 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:053 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:073 -> [UART, PM25] Reading data...
19:52:15:074 -> [UART, PM25] Data not available.
19:52:15:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:074 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:074 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:094 -> [UART, PM25] Reading data...
19:52:15:095 -> [UART, PM25] Data not available.
19:52:15:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:095 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:095 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:115 -> [UART, PM25] Reading data...
19:52:15:116 -> [UART, PM25] Data not available.
19:52:15:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:116 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:116 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:137 -> [UART, PM25] Reading data...
19:52:15:138 -> [UART, PM25] Data not available.
19:52:15:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:138 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:138 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:157 -> [UART, PM25] Reading data...
19:52:15:158 -> [UART, PM25] Data not available.
19:52:15:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:158 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:158 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:178 -> [UART, PM25] Reading data...
19:52:15:179 -> [UART, PM25] Data not available.
19:52:15:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:179 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:179 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:199 -> [UART, PM25] Reading data...
19:52:15:200 -> [UART, PM25] Data not available.
19:52:15:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:200 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:200 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:220 -> [UART, PM25] Reading data...
19:52:15:221 -> [UART, PM25] Data not available.
19:52:15:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:221 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:221 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:241 -> [UART, PM25] Reading data...
19:52:15:242 -> [UART, PM25] Data not available.
19:52:15:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:242 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:242 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:262 -> [UART, PM25] Reading data...
19:52:15:263 -> [UART, PM25] Data not available.
19:52:15:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:263 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:263 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:283 -> [UART, PM25] Reading data...
19:52:15:284 -> [UART, PM25] Data not available.
19:52:15:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:284 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:284 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:304 -> [UART, PM25] Reading data...
19:52:15:310 -> [UART, PM25] Data not available.
19:52:15:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:310 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:310 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:325 -> [UART, PM25] Reading data...
19:52:15:326 -> [UART, PM25] Data not available.
19:52:15:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:326 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:326 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:346 -> [UART, PM25] Reading data...
19:52:15:347 -> [UART, PM25] Data not available.
19:52:15:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:347 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:347 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:367 -> [UART, PM25] Reading data...
19:52:15:369 -> [UART, PM25] Data not available.
19:52:15:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:369 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:369 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:388 -> [UART, PM25] Reading data...
19:52:15:389 -> [UART, PM25] Data not available.
19:52:15:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:389 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:389 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:409 -> [UART, PM25] Reading data...
19:52:15:410 -> [UART, PM25] Data not available.
19:52:15:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:410 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:410 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:430 -> [UART, PM25] Reading data...
19:52:15:431 -> [UART, PM25] Data not available.
19:52:15:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:431 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:431 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:451 -> [UART, PM25] Reading data...
19:52:15:452 -> [UART, PM25] Data not available.
19:52:15:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:452 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:452 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:472 -> [UART, PM25] Reading data...
19:52:15:473 -> [UART, PM25] Data not available.
19:52:15:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:473 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:473 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:493 -> [UART, PM25] Reading data...
19:52:15:494 -> [UART, PM25] Data not available.
19:52:15:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:494 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:494 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:514 -> [UART, PM25] Reading data...
19:52:15:515 -> [UART, PM25] Data not available.
19:52:15:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:515 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:515 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:535 -> [UART, PM25] Reading data...
19:52:15:536 -> [UART, PM25] Data not available.
19:52:15:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:536 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:536 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:556 -> [UART, PM25] Reading data...
19:52:15:557 -> [UART, PM25] Data not available.
19:52:15:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:557 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:557 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:577 -> [UART, PM25] Reading data...
19:52:15:578 -> [UART, PM25] Data not available.
19:52:15:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:578 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:578 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:598 -> [UART, PM25] Reading data...
19:52:15:599 -> [UART, PM25] Data not available.
19:52:15:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:599 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:599 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:634 -> [UART, PM25] Reading data...
19:52:15:646 -> [UART, PM25] Data not available.
19:52:15:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:646 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:646 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:646 -> [UART, PM25] Reading data...
19:52:15:646 -> [UART, PM25] Data not available.
19:52:15:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:646 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:646 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:661 -> [UART, PM25] Reading data...
19:52:15:662 -> [UART, PM25] Data not available.
19:52:15:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:662 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:662 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:662 -> PING!
19:52:15:876 -> [UART, PM25] Reading data...
19:52:15:876 -> [UART, PM25] Data not available.
19:52:15:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:876 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:876 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:896 -> [UART, PM25] Reading data...
19:52:15:897 -> [UART, PM25] Data not available.
19:52:15:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:897 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:897 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:917 -> [UART, PM25] Reading data...
19:52:15:918 -> [UART, PM25] Data not available.
19:52:15:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:918 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:918 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:938 -> [UART, PM25] Reading data...
19:52:15:939 -> [UART, PM25] Data not available.
19:52:15:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:939 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:939 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:959 -> [UART, PM25] Reading data...
19:52:15:960 -> [UART, PM25] Data not available.
19:52:15:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:960 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:960 -> [UART, PM25] Uart available, resetting event queue..
19:52:15:980 -> [UART, PM25] Reading data...
19:52:15:981 -> [UART, PM25] Data not available.
19:52:15:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:15:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:15:981 -> [UART, PM25] Uart available, clearing write errors..
19:52:15:981 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:001 -> [UART, PM25] Reading data...
19:52:16:002 -> [UART, PM25] Data not available.
19:52:16:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:002 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:002 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:022 -> [UART, PM25] Reading data...
19:52:16:023 -> [UART, PM25] Data not available.
19:52:16:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:023 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:023 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:051 -> [UART, PM25] Reading data...
19:52:16:052 -> [UART, PM25] Data not available.
19:52:16:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:052 -> [UART, PM25] Uart available, resetting event queue..

19:52:16:086 -> [UART, PM25] Data not available.
19:52:16:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:086 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:086 -> [UART, PM25] Uart available, resetting event queue..

19:52:16:065 -> [UART, PM25] Data not available.
19:52:16:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:065 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:065 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:085 -> [UART, PM25] Reading data...19:52:16:065 -> [UART, PM25] Reading data...19:52:16:107 -> [UART, PM25] Reading data...
19:52:16:107 -> [UART, PM25] Data not available.
19:52:16:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:107 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:107 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:127 -> [UART, PM25] Reading data...
19:52:16:128 -> [UART, PM25] Data not available.
19:52:16:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:128 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:128 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:149 -> [UART, PM25] Reading data...
19:52:16:150 -> [UART, PM25] Data not available.
19:52:16:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:150 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:150 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:169 -> [UART, PM25] Reading data...
19:52:16:170 -> [UART, PM25] Data not available.
19:52:16:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:170 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:170 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:190 -> [UART, PM25] Reading data...
19:52:16:191 -> [UART, PM25] Data not available.
19:52:16:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:191 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:191 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:211 -> [UART, PM25] Reading data...
19:52:16:212 -> [UART, PM25] Data not available.
19:52:16:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:212 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:212 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:232 -> [UART, PM25] Reading data...
19:52:16:232 -> [UART, PM25] Data not available.
19:52:16:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:253 -> [UART, PM25] Reading data...
19:52:16:254 -> [UART, PM25] Data not available.
19:52:16:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:254 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:254 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:274 -> [UART, PM25] Reading data...
19:52:16:275 -> [UART, PM25] Data not available.
19:52:16:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:275 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:275 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:295 -> [UART, PM25] Reading data...
19:52:16:296 -> [UART, PM25] Data not available.
19:52:16:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:296 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:296 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:316 -> [UART, PM25] Reading data...
19:52:16:317 -> [UART, PM25] Data not available.
19:52:16:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:317 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:317 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:337 -> [UART, PM25] Reading data...
19:52:16:338 -> [UART, PM25] Data not available.
19:52:16:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:338 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:338 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:359 -> [UART, PM25] Reading data...
19:52:16:359 -> [UART, PM25] Data not available.
19:52:16:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:359 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:359 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:379 -> [UART, PM25] Reading data...
19:52:16:380 -> [UART, PM25] Data not available.
19:52:16:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:380 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:380 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:400 -> [UART, PM25] Reading data...
19:52:16:401 -> [UART, PM25] Data not available.
19:52:16:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:401 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:401 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:421 -> [UART, PM25] Reading data...
19:52:16:422 -> [UART, PM25] Data not available.
19:52:16:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:422 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:422 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:442 -> [UART, PM25] Reading data...
19:52:16:443 -> [UART, PM25] Data not available.
19:52:16:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:443 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:443 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:464 -> [UART, PM25] Reading data...
19:52:16:464 -> [UART, PM25] Data not available.
19:52:16:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:464 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:464 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:484 -> [UART, PM25] Reading data...
19:52:16:484 -> [UART, PM25] Data not available.
19:52:16:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:485 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:485 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:505 -> [UART, PM25] Reading data...
19:52:16:506 -> [UART, PM25] Data not available.
19:52:16:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:506 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:506 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:526 -> [UART, PM25] Reading data...
19:52:16:527 -> [UART, PM25] Data not available.
19:52:16:527 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:527 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:527 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:527 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:547 -> [UART, PM25] Reading data...
19:52:16:548 -> [UART, PM25] Data not available.
19:52:16:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:548 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:548 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:569 -> [UART, PM25] Reading data...
19:52:16:569 -> [UART, PM25] Data not available.
19:52:16:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:569 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:569 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:590 -> [UART, PM25] Reading data...
19:52:16:590 -> [UART, PM25] Data not available.
19:52:16:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:590 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:590 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:610 -> [UART, PM25] Reading data...
19:52:16:611 -> [UART, PM25] Data not available.
19:52:16:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:611 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:611 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:631 -> [UART, PM25] Reading data...
19:52:16:632 -> [UART, PM25] Data not available.
19:52:16:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:632 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:632 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:652 -> [UART, PM25] Reading data...
19:52:16:653 -> [UART, PM25] Data not available.
19:52:16:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:653 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:653 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:673 -> [UART, PM25] Reading data...
19:52:16:674 -> [UART, PM25] Data not available.
19:52:16:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:674 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:674 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:694 -> [UART, PM25] Reading data...
19:52:16:695 -> [UART, PM25] Data not available.
19:52:16:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:695 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:695 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:715 -> [UART, PM25] Reading data...
19:52:16:716 -> [UART, PM25] Data not available.
19:52:16:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:716 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:716 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:737 -> [UART, PM25] Reading data...
19:52:16:737 -> [UART, PM25] Data not available.
19:52:16:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:737 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:737 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:757 -> [UART, PM25] Reading data...
19:52:16:758 -> [UART, PM25] Data not available.
19:52:16:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:758 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:758 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:778 -> [UART, PM25] Reading data...
19:52:16:779 -> [UART, PM25] Data not available.
19:52:16:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:779 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:779 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:799 -> [UART, PM25] Reading data...
19:52:16:800 -> [UART, PM25] Data not available.
19:52:16:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:800 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:800 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:821 -> [UART, PM25] Reading data...
19:52:16:821 -> [UART, PM25] Data not available.
19:52:16:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:821 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:821 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:841 -> [UART, PM25] Reading data...
19:52:16:842 -> [UART, PM25] Data not available.
19:52:16:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:842 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:842 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:862 -> [UART, PM25] Reading data...
19:52:16:863 -> [UART, PM25] Data not available.
19:52:16:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:863 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:863 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:885 -> [UART, PM25] Reading data...
19:52:16:885 -> [UART, PM25] Data not available.
19:52:16:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:885 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:885 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:904 -> [UART, PM25] Reading data...
19:52:16:905 -> [UART, PM25] Data not available.
19:52:16:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:905 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:905 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:925 -> [UART, PM25] Reading data...
19:52:16:926 -> [UART, PM25] Data not available.
19:52:16:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:926 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:926 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:946 -> [UART, PM25] Reading data...
19:52:16:947 -> [UART, PM25] Data not available.
19:52:16:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:947 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:947 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:967 -> [UART, PM25] Reading data...
19:52:16:968 -> [UART, PM25] Data not available.
19:52:16:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:968 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:968 -> [UART, PM25] Uart available, resetting event queue..
19:52:16:988 -> [UART, PM25] Reading data...
19:52:16:989 -> [UART, PM25] Data not available.
19:52:16:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:16:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:16:989 -> [UART, PM25] Uart available, clearing write errors..
19:52:16:989 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:009 -> [UART, PM25] Reading data...
19:52:17:010 -> [UART, PM25] Data not available.
19:52:17:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:010 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:010 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:030 -> [UART, PM25] Reading data...
19:52:17:031 -> [UART, PM25] Data not available.
19:52:17:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:031 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:031 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:051 -> [UART, PM25] Reading data...
19:52:17:052 -> [UART, PM25] Data not available.
19:52:17:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:077 -> [UART, PM25] Reading data...
19:52:17:077 -> [UART, PM25] Data not available.
19:52:17:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:093 -> [UART, PM25] Reading data...
19:52:17:094 -> [UART, PM25] Data not available.
19:52:17:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:094 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:094 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:114 -> [UART, PM25] Reading data...
19:52:17:115 -> [UART, PM25] Data not available.
19:52:17:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:115 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:115 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:135 -> [UART, PM25] Reading data...
19:52:17:136 -> [UART, PM25] Data not available.
19:52:17:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:136 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:136 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:156 -> [UART, PM25] Reading data...
19:52:17:157 -> [UART, PM25] Data not available.
19:52:17:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:157 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:157 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:177 -> [UART, PM25] Reading data...
19:52:17:178 -> [UART, PM25] Data not available.
19:52:17:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:178 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:178 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:198 -> [UART, PM25] Reading data...
19:52:17:199 -> [UART, PM25] Data not available.
19:52:17:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:199 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:199 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:219 -> [UART, PM25] Reading data...
19:52:17:220 -> [UART, PM25] Data not available.
19:52:17:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:220 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:220 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:240 -> [UART, PM25] Reading data...
19:52:17:241 -> [UART, PM25] Data not available.
19:52:17:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:241 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:241 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:261 -> [UART, PM25] Reading data...
19:52:17:262 -> [UART, PM25] Data not available.
19:52:17:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:262 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:262 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:283 -> [UART, PM25] Reading data...
19:52:17:283 -> [UART, PM25] Data not available.
19:52:17:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:283 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:283 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:304 -> [UART, PM25] Reading data...
19:52:17:305 -> [UART, PM25] Data not available.
19:52:17:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:305 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:305 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:324 -> [UART, PM25] Reading data...
19:52:17:325 -> [UART, PM25] Data not available.
19:52:17:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:325 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:325 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:346 -> [UART, PM25] Reading data...
19:52:17:346 -> [UART, PM25] Data not available.
19:52:17:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:346 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:346 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:366 -> [UART, PM25] Reading data...
19:52:17:367 -> [UART, PM25] Data not available.
19:52:17:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:367 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:367 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:387 -> [UART, PM25] Reading data...
19:52:17:388 -> [UART, PM25] Data not available.
19:52:17:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:388 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:388 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:408 -> [UART, PM25] Reading data...
19:52:17:409 -> [UART, PM25] Data not available.
19:52:17:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:409 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:409 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:457 -> [UART, PM25] Reading data...
19:52:17:472 -> [UART, PM25] Data not available.
19:52:17:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:472 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:472 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:472 -> [UART, PM25] Reading data...
19:52:17:472 -> [UART, PM25] Data not available.
19:52:17:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:472 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:472 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:472 -> [UART, PM25] Reading data...
19:52:17:472 -> [UART, PM25] Data not available.
19:52:17:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:472 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:472 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:492 -> [UART, PM25] Reading data...
19:52:17:493 -> [UART, PM25] Data not available.
19:52:17:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:493 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:493 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:513 -> [UART, PM25] Reading data...
19:52:17:514 -> [UART, PM25] Data not available.
19:52:17:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:514 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:514 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:534 -> [UART, PM25] Reading data...
19:52:17:535 -> [UART, PM25] Data not available.
19:52:17:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:535 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:535 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:555 -> [UART, PM25] Reading data...
19:52:17:556 -> [UART, PM25] Data not available.
19:52:17:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:556 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:556 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:576 -> [UART, PM25] Reading data...
19:52:17:592 -> [UART, PM25] Data not available.
19:52:17:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:592 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:592 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:597 -> [UART, PM25] Reading data...
19:52:17:598 -> [UART, PM25] Data not available.
19:52:17:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:598 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:598 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:618 -> [UART, PM25] Reading data...
19:52:17:619 -> [UART, PM25] Data not available.
19:52:17:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:619 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:619 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:639 -> [UART, PM25] Reading data...
19:52:17:640 -> [UART, PM25] Data not available.
19:52:17:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:640 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:640 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:660 -> [UART, PM25] Reading data...
19:52:17:661 -> [UART, PM25] Data not available.
19:52:17:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:661 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:661 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:681 -> [UART, PM25] Reading data...
19:52:17:682 -> [UART, PM25] Data not available.
19:52:17:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:682 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:682 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:703 -> [UART, PM25] Reading data...
19:52:17:703 -> [UART, PM25] Data not available.
19:52:17:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:703 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:703 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:723 -> [UART, PM25] Reading data...
19:52:17:724 -> [UART, PM25] Data not available.
19:52:17:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:724 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:724 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:744 -> [UART, PM25] Reading data...
19:52:17:745 -> [UART, PM25] Data not available.
19:52:17:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:745 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:745 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:765 -> [UART, PM25] Reading data...
19:52:17:766 -> [UART, PM25] Data not available.
19:52:17:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:766 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:766 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:787 -> [UART, PM25] Reading data...
19:52:17:788 -> [UART, PM25] Data not available.
19:52:17:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:788 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:788 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:807 -> [UART, PM25] Reading data...
19:52:17:808 -> [UART, PM25] Data not available.
19:52:17:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:808 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:808 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:828 -> [UART, PM25] Reading data...
19:52:17:829 -> [UART, PM25] Data not available.
19:52:17:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:829 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:829 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:849 -> [UART, PM25] Reading data...
19:52:17:850 -> [UART, PM25] Data not available.
19:52:17:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:850 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:850 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:870 -> [UART, PM25] Reading data...
19:52:17:871 -> [UART, PM25] Data not available.
19:52:17:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:871 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:871 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:891 -> [UART, PM25] Reading data...
19:52:17:892 -> [UART, PM25] Data not available.
19:52:17:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:892 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:892 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:912 -> [UART, PM25] Reading data...
19:52:17:913 -> [UART, PM25] Data not available.
19:52:17:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:913 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:913 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:933 -> [UART, PM25] Reading data...
19:52:17:934 -> [UART, PM25] Data not available.
19:52:17:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:934 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:934 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:954 -> [UART, PM25] Reading data...
19:52:17:955 -> [UART, PM25] Data not available.
19:52:17:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:955 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:955 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:975 -> [UART, PM25] Reading data...
19:52:17:976 -> [UART, PM25] Data not available.
19:52:17:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:976 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:976 -> [UART, PM25] Uart available, resetting event queue..
19:52:17:996 -> [UART, PM25] Reading data...
19:52:17:997 -> [UART, PM25] Data not available.
19:52:17:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:17:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:17:997 -> [UART, PM25] Uart available, clearing write errors..
19:52:17:997 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:017 -> [UART, PM25] Reading data...
19:52:18:018 -> [UART, PM25] Data not available.
19:52:18:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:018 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:018 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:039 -> [UART, PM25] Reading data...
19:52:18:039 -> [UART, PM25] Data not available.
19:52:18:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:059 -> [UART, PM25] Reading data...
19:52:18:060 -> [UART, PM25] Data not available.
19:52:18:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:060 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:060 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:080 -> [UART, PM25] Reading data...
19:52:18:081 -> [UART, PM25] Data not available.
19:52:18:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:081 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:081 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:115 -> [UART, PM25] Reading data...
19:52:18:116 -> [UART, PM25] Data not available.
19:52:18:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:116 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:116 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:122 -> [UART, PM25] Reading data...
19:52:18:123 -> [UART, PM25] Data not available.
19:52:18:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:123 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:123 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:143 -> [UART, PM25] Reading data...
19:52:18:144 -> [UART, PM25] Data not available.
19:52:18:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:144 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:144 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:164 -> [UART, PM25] Reading data...
19:52:18:165 -> [UART, PM25] Data not available.
19:52:18:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:165 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:165 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:185 -> [UART, PM25] Reading data...
19:52:18:186 -> [UART, PM25] Data not available.
19:52:18:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:186 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:186 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:207 -> [UART, PM25] Reading data...
19:52:18:207 -> [UART, PM25] Data not available.
19:52:18:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:207 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:207 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:227 -> [UART, PM25] Reading data...
19:52:18:228 -> [UART, PM25] Data not available.
19:52:18:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:228 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:228 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:251 -> [UART, PM25] Reading data...
19:52:18:252 -> [UART, PM25] Data not available.
19:52:18:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:252 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:252 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:269 -> [UART, PM25] Reading data...
19:52:18:270 -> [UART, PM25] Data not available.
19:52:18:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:270 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:270 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:290 -> [UART, PM25] Reading data...
19:52:18:291 -> [UART, PM25] Data not available.
19:52:18:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:291 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:291 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:312 -> [UART, PM25] Reading data...
19:52:18:312 -> [UART, PM25] Data not available.
19:52:18:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:312 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:312 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:332 -> [UART, PM25] Reading data...
19:52:18:333 -> [UART, PM25] Data not available.
19:52:18:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:333 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:333 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:353 -> [UART, PM25] Reading data...
19:52:18:353 -> [UART, PM25] Data not available.
19:52:18:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:354 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:354 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:374 -> [UART, PM25] Reading data...
19:52:18:375 -> [UART, PM25] Data not available.
19:52:18:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:375 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:375 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:395 -> [UART, PM25] Reading data...
19:52:18:396 -> [UART, PM25] Data not available.
19:52:18:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:396 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:396 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:417 -> [UART, PM25] Reading data...
19:52:18:417 -> [UART, PM25] Data not available.
19:52:18:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:417 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:417 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:437 -> [UART, PM25] Reading data...
19:52:18:438 -> [UART, PM25] Data not available.
19:52:18:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:438 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:438 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:458 -> [UART, PM25] Reading data...
19:52:18:459 -> [UART, PM25] Data not available.
19:52:18:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:459 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:459 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:479 -> [UART, PM25] Reading data...
19:52:18:480 -> [UART, PM25] Data not available.
19:52:18:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:480 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:480 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:503 -> [UART, PM25] Reading data...
19:52:18:504 -> [UART, PM25] Data not available.
19:52:18:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:504 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:504 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:521 -> [UART, PM25] Reading data...
19:52:18:522 -> [UART, PM25] Data not available.
19:52:18:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:522 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:522 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:542 -> [UART, PM25] Reading data...
19:52:18:543 -> [UART, PM25] Data not available.
19:52:18:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:543 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:543 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:563 -> [UART, PM25] Reading data...
19:52:18:564 -> [UART, PM25] Data not available.
19:52:18:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:564 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:564 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:584 -> [UART, PM25] Reading data...
19:52:18:585 -> [UART, PM25] Data not available.
19:52:18:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:585 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:585 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:605 -> [UART, PM25] Reading data...
19:52:18:606 -> [UART, PM25] Data not available.
19:52:18:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:606 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:606 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:643 -> [UART, PM25] Reading data...
19:52:18:644 -> [UART, PM25] Data not available.
19:52:18:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:647 -> [UART, PM25] Reading data...
19:52:18:647 -> [UART, PM25] Data not available.
19:52:18:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:648 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:648 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:668 -> [UART, PM25] Reading data...
19:52:18:669 -> [UART, PM25] Data not available.
19:52:18:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:669 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:669 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:689 -> [UART, PM25] Reading data...
19:52:18:690 -> [UART, PM25] Data not available.
19:52:18:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:690 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:690 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:710 -> [UART, PM25] Reading data...
19:52:18:711 -> [UART, PM25] Data not available.
19:52:18:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:711 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:711 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:731 -> [UART, PM25] Reading data...
19:52:18:732 -> [UART, PM25] Data not available.
19:52:18:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:732 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:732 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:752 -> [UART, PM25] Reading data...
19:52:18:753 -> [UART, PM25] Data not available.
19:52:18:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:753 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:753 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:773 -> [UART, PM25] Reading data...
19:52:18:774 -> [UART, PM25] Data not available.
19:52:18:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:774 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:774 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:794 -> [UART, PM25] Reading data...
19:52:18:795 -> [UART, PM25] Data not available.
19:52:18:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:795 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:795 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:815 -> [UART, PM25] Reading data...
19:52:18:816 -> [UART, PM25] Data not available.
19:52:18:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:816 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:816 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:837 -> [UART, PM25] Reading data...
19:52:18:837 -> [UART, PM25] Data not available.
19:52:18:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:837 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:837 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:857 -> [UART, PM25] Reading data...
19:52:18:858 -> [UART, PM25] Data not available.
19:52:18:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:878 -> [UART, PM25] Reading data...
19:52:18:879 -> [UART, PM25] Data not available.
19:52:18:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:879 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:879 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:899 -> [UART, PM25] Reading data...
19:52:18:900 -> [UART, PM25] Data not available.
19:52:18:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:900 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:900 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:921 -> [UART, PM25] Reading data...
19:52:18:921 -> [UART, PM25] Data not available.
19:52:18:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:921 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:921 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:941 -> [UART, PM25] Reading data...
19:52:18:942 -> [UART, PM25] Data not available.
19:52:18:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:942 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:942 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:986 -> [UART, PM25] Reading data...
19:52:18:989 -> [UART, PM25] Data not available.
19:52:18:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:989 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:989 -> [UART, PM25] Uart available, resetting event queue..
19:52:18:989 -> [UART, PM25] Reading data...
19:52:18:989 -> [UART, PM25] Data not available.
19:52:18:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:18:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:18:989 -> [UART, PM25] Uart available, clearing write errors..
19:52:18:989 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:004 -> [UART, PM25] Reading data...
19:52:19:005 -> [UART, PM25] Data not available.
19:52:19:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:005 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:005 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:025 -> [UART, PM25] Reading data...
19:52:19:026 -> [UART, PM25] Data not available.
19:52:19:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:026 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:026 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:046 -> [UART, PM25] Reading data...
19:52:19:047 -> [UART, PM25] Data not available.
19:52:19:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:047 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:047 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:067 -> [UART, PM25] Reading data...
19:52:19:068 -> [UART, PM25] Data not available.
19:52:19:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:068 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:068 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:091 -> [UART, PM25] Reading data...
19:52:19:092 -> [UART, PM25] Data not available.
19:52:19:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:092 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:092 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:109 -> [UART, PM25] Reading data...
19:52:19:110 -> [UART, PM25] Data not available.
19:52:19:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:110 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:110 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:130 -> [UART, PM25] Reading data...
19:52:19:131 -> [UART, PM25] Data not available.
19:52:19:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:131 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:131 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:155 -> [UART, PM25] Reading data...
19:52:19:156 -> [UART, PM25] Data not available.
19:52:19:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:172 -> [UART, PM25] Reading data...
19:52:19:173 -> [UART, PM25] Data not available.
19:52:19:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:173 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:173 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:193 -> [UART, PM25] Reading data...
19:52:19:193 -> [UART, PM25] Data not available.
19:52:19:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:194 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:194 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:214 -> [UART, PM25] Reading data...
19:52:19:215 -> [UART, PM25] Data not available.
19:52:19:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:215 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:215 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:236 -> [UART, PM25] Reading data...
19:52:19:236 -> [UART, PM25] Data not available.
19:52:19:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:236 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:236 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:256 -> [UART, PM25] Reading data...
19:52:19:257 -> [UART, PM25] Data not available.
19:52:19:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:257 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:257 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:277 -> [UART, PM25] Reading data...
19:52:19:278 -> [UART, PM25] Data not available.
19:52:19:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:278 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:278 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:302 -> [UART, PM25] Reading data...
19:52:19:303 -> [UART, PM25] Data not available.
19:52:19:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:319 -> [UART, PM25] Reading data...
19:52:19:319 -> [UART, PM25] Data not available.
19:52:19:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:320 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:320 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:340 -> [UART, PM25] Reading data...
19:52:19:341 -> [UART, PM25] Data not available.
19:52:19:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:341 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:341 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:361 -> [UART, PM25] Reading data...
19:52:19:362 -> [UART, PM25] Data not available.
19:52:19:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:362 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:362 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:382 -> [UART, PM25] Reading data...
19:52:19:382 -> [UART, PM25] Data not available.
19:52:19:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:383 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:383 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:403 -> [UART, PM25] Reading data...
19:52:19:404 -> [UART, PM25] Data not available.
19:52:19:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:404 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:404 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:424 -> [UART, PM25] Reading data...
19:52:19:425 -> [UART, PM25] Data not available.
19:52:19:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:425 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:425 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:445 -> [UART, PM25] Reading data...
19:52:19:446 -> [UART, PM25] Data not available.
19:52:19:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:446 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:446 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:466 -> [UART, PM25] Reading data...
19:52:19:467 -> [UART, PM25] Data not available.
19:52:19:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:467 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:467 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:487 -> [UART, PM25] Reading data...
19:52:19:488 -> [UART, PM25] Data not available.
19:52:19:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:488 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:488 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:508 -> [UART, PM25] Reading data...
19:52:19:509 -> [UART, PM25] Data not available.
19:52:19:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:509 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:509 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:529 -> [UART, PM25] Reading data...
19:52:19:530 -> [UART, PM25] Data not available.
19:52:19:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:530 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:530 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:551 -> [UART, PM25] Reading data...
19:52:19:551 -> [UART, PM25] Data not available.
19:52:19:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:551 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:551 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:571 -> [UART, PM25] Reading data...
19:52:19:572 -> [UART, PM25] Data not available.
19:52:19:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:572 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:572 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:592 -> [UART, PM25] Reading data...
19:52:19:593 -> [UART, PM25] Data not available.
19:52:19:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:593 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:593 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:613 -> [UART, PM25] Reading data...
19:52:19:614 -> [UART, PM25] Data not available.
19:52:19:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:614 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:614 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:634 -> [UART, PM25] Reading data...
19:52:19:635 -> [UART, PM25] Data not available.
19:52:19:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:635 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:635 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:669 -> [UART, PM25] Reading data...
19:52:19:670 -> [UART, PM25] Data not available.
19:52:19:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:670 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:670 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:676 -> [UART, PM25] Reading data...
19:52:19:677 -> [UART, PM25] Data not available.
19:52:19:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:677 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:677 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:697 -> [UART, PM25] Reading data...
19:52:19:698 -> [UART, PM25] Data not available.
19:52:19:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:698 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:698 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:718 -> [UART, PM25] Reading data...
19:52:19:719 -> [UART, PM25] Data not available.
19:52:19:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:719 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:719 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:739 -> [UART, PM25] Reading data...
19:52:19:740 -> [UART, PM25] Data not available.
19:52:19:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:740 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:740 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:760 -> [UART, PM25] Reading data...
19:52:19:761 -> [UART, PM25] Data not available.
19:52:19:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:761 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:761 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:781 -> [UART, PM25] Reading data...
19:52:19:782 -> [UART, PM25] Data not available.
19:52:19:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:782 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:782 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:802 -> [UART, PM25] Reading data...
19:52:19:803 -> [UART, PM25] Data not available.
19:52:19:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:803 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:803 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:823 -> [UART, PM25] Reading data...
19:52:19:824 -> [UART, PM25] Data not available.
19:52:19:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:824 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:824 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:844 -> [UART, PM25] Reading data...
19:52:19:845 -> [UART, PM25] Data not available.
19:52:19:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:845 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:845 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:865 -> [UART, PM25] Reading data...
19:52:19:865 -> [UART, PM25] Data not available.
19:52:19:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:865 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:865 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:886 -> [UART, PM25] Reading data...
19:52:19:887 -> [UART, PM25] Data not available.
19:52:19:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:887 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:887 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:907 -> [UART, PM25] Reading data...
19:52:19:908 -> [UART, PM25] Data not available.
19:52:19:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:908 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:908 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:928 -> [UART, PM25] Reading data...
19:52:19:930 -> [UART, PM25] Data not available.
19:52:19:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:930 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:930 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:949 -> [UART, PM25] Reading data...
19:52:19:950 -> [UART, PM25] Data not available.
19:52:19:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:950 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:950 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:970 -> [UART, PM25] Reading data...
19:52:19:971 -> [UART, PM25] Data not available.
19:52:19:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:971 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:971 -> [UART, PM25] Uart available, resetting event queue..
19:52:19:991 -> [UART, PM25] Reading data...
19:52:19:992 -> [UART, PM25] Data not available.
19:52:19:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:19:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:19:992 -> [UART, PM25] Uart available, clearing write errors..
19:52:19:992 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:012 -> [UART, PM25] Reading data...
19:52:20:013 -> [UART, PM25] Data not available.
19:52:20:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:013 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:013 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:033 -> [UART, PM25] Reading data...
19:52:20:034 -> [UART, PM25] Data not available.
19:52:20:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:034 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:034 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:054 -> [UART, PM25] Reading data...
19:52:20:055 -> [UART, PM25] Data not available.
19:52:20:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:055 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:055 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:075 -> [UART, PM25] Reading data...
19:52:20:076 -> [UART, PM25] Data not available.
19:52:20:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:076 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:076 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:096 -> [UART, PM25] Reading data...
19:52:20:097 -> [UART, PM25] Data not available.
19:52:20:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:097 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:097 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:117 -> [UART, PM25] Reading data...
19:52:20:118 -> [UART, PM25] Data not available.
19:52:20:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:118 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:118 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:138 -> [UART, PM25] Reading data...
19:52:20:139 -> [UART, PM25] Data not available.
19:52:20:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:139 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:139 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:160 -> [UART, PM25] Reading data...
19:52:20:160 -> [UART, PM25] Data not available.
19:52:20:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:160 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:160 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:194 -> [UART, PM25] Reading data...
19:52:20:195 -> [UART, PM25] Data not available.
19:52:20:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:195 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:195 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:201 -> [UART, PM25] Reading data...
19:52:20:202 -> [UART, PM25] Data not available.
19:52:20:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:202 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:202 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:222 -> [UART, PM25] Reading data...
19:52:20:223 -> [UART, PM25] Data not available.
19:52:20:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:223 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:223 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:243 -> [UART, PM25] Reading data...
19:52:20:244 -> [UART, PM25] Data not available.
19:52:20:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:244 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:244 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:264 -> [UART, PM25] Reading data...
19:52:20:265 -> [UART, PM25] Data not available.
19:52:20:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:265 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:265 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:285 -> [UART, PM25] Reading data...
19:52:20:286 -> [UART, PM25] Data not available.
19:52:20:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:286 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:286 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:306 -> [UART, PM25] Reading data...
19:52:20:307 -> [UART, PM25] Data not available.
19:52:20:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:307 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:307 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:327 -> [UART, PM25] Reading data...
19:52:20:328 -> [UART, PM25] Data not available.
19:52:20:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:328 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:328 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:348 -> [UART, PM25] Reading data...
19:52:20:349 -> [UART, PM25] Data not available.
19:52:20:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:349 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:349 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:369 -> [UART, PM25] Reading data...
19:52:20:370 -> [UART, PM25] Data not available.
19:52:20:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:370 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:370 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:370 -> PING!
19:52:20:583 -> [UART, PM25] Reading data...
19:52:20:584 -> [UART, PM25] Data not available.
19:52:20:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:584 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:584 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:604 -> [UART, PM25] Reading data...
19:52:20:605 -> [UART, PM25] Data not available.
19:52:20:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:605 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:605 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:625 -> [UART, PM25] Reading data...
19:52:20:626 -> [UART, PM25] Data not available.
19:52:20:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:626 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:626 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:646 -> [UART, PM25] Reading data...
19:52:20:648 -> [UART, PM25] Data not available.
19:52:20:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:648 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:648 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:667 -> [UART, PM25] Reading data...
19:52:20:668 -> [UART, PM25] Data not available.
19:52:20:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:668 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:668 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:688 -> [UART, PM25] Reading data...
19:52:20:689 -> [UART, PM25] Data not available.
19:52:20:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:689 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:689 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:711 -> [UART, PM25] Reading data...
19:52:20:712 -> [UART, PM25] Data not available.
19:52:20:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:712 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:712 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:730 -> [UART, PM25] Reading data...
19:52:20:730 -> [UART, PM25] Data not available.
19:52:20:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:731 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:731 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:751 -> [UART, PM25] Reading data...
19:52:20:752 -> [UART, PM25] Data not available.
19:52:20:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:752 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:752 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:772 -> [UART, PM25] Reading data...
19:52:20:773 -> [UART, PM25] Data not available.
19:52:20:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:773 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:773 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:793 -> [UART, PM25] Reading data...
19:52:20:794 -> [UART, PM25] Data not available.
19:52:20:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:794 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:794 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:814 -> [UART, PM25] Reading data...
19:52:20:815 -> [UART, PM25] Data not available.
19:52:20:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:815 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:815 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:836 -> [UART, PM25] Reading data...
19:52:20:857 -> [UART, PM25] Data not available.
19:52:20:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:857 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:857 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:857 -> [UART, PM25] Reading data...
19:52:20:857 -> [UART, PM25] Data not available.
19:52:20:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:861 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:861 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:880 -> [UART, PM25] Reading data...
19:52:20:881 -> [UART, PM25] Data not available.
19:52:20:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:881 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:881 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:898 -> [UART, PM25] Reading data...
19:52:20:898 -> [UART, PM25] Data not available.
19:52:20:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:898 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:898 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:919 -> [UART, PM25] Reading data...
19:52:20:920 -> [UART, PM25] Data not available.
19:52:20:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:920 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:920 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:940 -> [UART, PM25] Reading data...
19:52:20:940 -> [UART, PM25] Data not available.
19:52:20:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:961 -> [UART, PM25] Reading data...
19:52:20:962 -> [UART, PM25] Data not available.
19:52:20:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:962 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:962 -> [UART, PM25] Uart available, resetting event queue..
19:52:20:982 -> [UART, PM25] Reading data...
19:52:20:983 -> [UART, PM25] Data not available.
19:52:20:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:20:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:20:983 -> [UART, PM25] Uart available, clearing write errors..
19:52:20:983 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:003 -> [UART, PM25] Reading data...
19:52:21:004 -> [UART, PM25] Data not available.
19:52:21:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:004 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:004 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:024 -> [UART, PM25] Reading data...
19:52:21:024 -> [UART, PM25] Data not available.
19:52:21:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:025 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:025 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:046 -> [UART, PM25] Reading data...
19:52:21:046 -> [UART, PM25] Data not available.
19:52:21:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:046 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:046 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:067 -> [UART, PM25] Reading data...
19:52:21:067 -> [UART, PM25] Data not available.
19:52:21:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:067 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:067 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:087 -> [UART, PM25] Reading data...
19:52:21:088 -> [UART, PM25] Data not available.
19:52:21:088 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:088 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:088 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:088 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:108 -> [UART, PM25] Reading data...
19:52:21:109 -> [UART, PM25] Data not available.
19:52:21:109 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:109 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:109 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:109 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:129 -> [UART, PM25] Reading data...
19:52:21:130 -> [UART, PM25] Data not available.
19:52:21:130 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:130 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:130 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:130 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:150 -> [UART, PM25] Reading data...
19:52:21:151 -> [UART, PM25] Data not available.
19:52:21:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:151 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:151 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:172 -> [UART, PM25] Reading data...
19:52:21:172 -> [UART, PM25] Data not available.
19:52:21:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:172 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:172 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:193 -> [UART, PM25] Reading data...
19:52:21:193 -> [UART, PM25] Data not available.
19:52:21:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:193 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:193 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:225 -> [UART, PM25] Reading data...
19:52:21:226 -> [UART, PM25] Data not available.
19:52:21:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:226 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:226 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:234 -> [UART, PM25] Reading data...
19:52:21:235 -> [UART, PM25] Data not available.
19:52:21:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:235 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:235 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:255 -> [UART, PM25] Reading data...
19:52:21:256 -> [UART, PM25] Data not available.
19:52:21:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:256 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:256 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:276 -> [UART, PM25] Reading data...
19:52:21:277 -> [UART, PM25] Data not available.
19:52:21:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:277 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:277 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:297 -> [UART, PM25] Reading data...
19:52:21:298 -> [UART, PM25] Data not available.
19:52:21:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:298 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:298 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:318 -> [UART, PM25] Reading data...
19:52:21:318 -> [UART, PM25] Data not available.
19:52:21:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:319 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:319 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:339 -> [UART, PM25] Reading data...
19:52:21:340 -> [UART, PM25] Data not available.
19:52:21:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:340 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:340 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:360 -> [UART, PM25] Reading data...
19:52:21:361 -> [UART, PM25] Data not available.
19:52:21:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:361 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:361 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:381 -> [UART, PM25] Reading data...
19:52:21:382 -> [UART, PM25] Data not available.
19:52:21:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:382 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:382 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:402 -> [UART, PM25] Reading data...
19:52:21:403 -> [UART, PM25] Data not available.
19:52:21:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:403 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:403 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:423 -> [UART, PM25] Reading data...
19:52:21:424 -> [UART, PM25] Data not available.
19:52:21:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:424 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:424 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:444 -> [UART, PM25] Reading data...
19:52:21:445 -> [UART, PM25] Data not available.
19:52:21:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:445 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:445 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:465 -> [UART, PM25] Reading data...
19:52:21:466 -> [UART, PM25] Data not available.
19:52:21:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:466 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:466 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:486 -> [UART, PM25] Reading data...
19:52:21:487 -> [UART, PM25] Data not available.
19:52:21:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:487 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:487 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:507 -> [UART, PM25] Reading data...
19:52:21:508 -> [UART, PM25] Data not available.
19:52:21:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:508 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:508 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:528 -> [UART, PM25] Reading data...
19:52:21:529 -> [UART, PM25] Data not available.
19:52:21:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:529 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:529 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:549 -> [UART, PM25] Reading data...
19:52:21:550 -> [UART, PM25] Data not available.
19:52:21:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:550 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:550 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:570 -> [UART, PM25] Reading data...
19:52:21:570 -> [UART, PM25] Data not available.
19:52:21:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:570 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:570 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:591 -> [UART, PM25] Reading data...
19:52:21:592 -> [UART, PM25] Data not available.
19:52:21:592 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:592 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:592 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:592 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:612 -> [UART, PM25] Reading data...
19:52:21:613 -> [UART, PM25] Data not available.
19:52:21:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:613 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:613 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:633 -> [UART, PM25] Reading data...
19:52:21:634 -> [UART, PM25] Data not available.
19:52:21:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:634 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:634 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:654 -> [UART, PM25] Reading data...
19:52:21:655 -> [UART, PM25] Data not available.
19:52:21:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:655 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:655 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:675 -> [UART, PM25] Reading data...
19:52:21:675 -> [UART, PM25] Data not available.
19:52:21:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:677 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:677 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:696 -> [UART, PM25] Reading data...
19:52:21:697 -> [UART, PM25] Data not available.
19:52:21:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:697 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:697 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:717 -> [UART, PM25] Reading data...
19:52:21:718 -> [UART, PM25] Data not available.
19:52:21:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:718 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:718 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:745 -> [UART, PM25] Reading data...
19:52:21:745 -> [UART, PM25] Data not available.
19:52:21:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:745 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:745 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:760 -> [UART, PM25] Reading data...
19:52:21:760 -> [UART, PM25] Data not available.
19:52:21:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:760 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:760 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:780 -> [UART, PM25] Reading data...
19:52:21:781 -> [UART, PM25] Data not available.
19:52:21:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:781 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:781 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:801 -> [UART, PM25] Reading data...
19:52:21:802 -> [UART, PM25] Data not available.
19:52:21:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:802 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:802 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:822 -> [UART, PM25] Reading data...
19:52:21:823 -> [UART, PM25] Data not available.
19:52:21:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:823 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:823 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:843 -> [UART, PM25] Reading data...
19:52:21:844 -> [UART, PM25] Data not available.
19:52:21:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:844 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:844 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:864 -> [UART, PM25] Reading data...
19:52:21:865 -> [UART, PM25] Data not available.
19:52:21:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:865 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:865 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:885 -> [UART, PM25] Reading data...
19:52:21:886 -> [UART, PM25] Data not available.
19:52:21:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:886 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:886 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:906 -> [UART, PM25] Reading data...
19:52:21:907 -> [UART, PM25] Data not available.
19:52:21:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:907 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:907 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:927 -> [UART, PM25] Reading data...
19:52:21:927 -> [UART, PM25] Data not available.
19:52:21:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:928 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:928 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:948 -> [UART, PM25] Reading data...
19:52:21:948 -> [UART, PM25] Data not available.
19:52:21:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:948 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:948 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:969 -> [UART, PM25] Reading data...
19:52:21:970 -> [UART, PM25] Data not available.
19:52:21:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:970 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:970 -> [UART, PM25] Uart available, resetting event queue..
19:52:21:990 -> [UART, PM25] Reading data...
19:52:21:991 -> [UART, PM25] Data not available.
19:52:21:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:21:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:21:991 -> [UART, PM25] Uart available, clearing write errors..
19:52:21:991 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:011 -> [UART, PM25] Reading data...
19:52:22:012 -> [UART, PM25] Data not available.
19:52:22:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:012 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:012 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:032 -> [UART, PM25] Reading data...
19:52:22:032 -> [UART, PM25] Data not available.
19:52:22:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:033 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:033 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:053 -> [UART, PM25] Reading data...
19:52:22:054 -> [UART, PM25] Data not available.
19:52:22:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:054 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:054 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:074 -> [UART, PM25] Reading data...
19:52:22:075 -> [UART, PM25] Data not available.
19:52:22:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:075 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:075 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:095 -> [UART, PM25] Reading data...
19:52:22:096 -> [UART, PM25] Data not available.
19:52:22:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:096 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:096 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:116 -> [UART, PM25] Reading data...
19:52:22:117 -> [UART, PM25] Data not available.
19:52:22:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:117 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:117 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:137 -> [UART, PM25] Reading data...
19:52:22:138 -> [UART, PM25] Data not available.
19:52:22:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:138 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:138 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:158 -> [UART, PM25] Reading data...
19:52:22:159 -> [UART, PM25] Data not available.
19:52:22:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:159 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:159 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:179 -> [UART, PM25] Reading data...
19:52:22:180 -> [UART, PM25] Data not available.
19:52:22:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:180 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:180 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:201 -> [UART, PM25] Reading data...
19:52:22:201 -> [UART, PM25] Data not available.
19:52:22:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:201 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:201 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:221 -> [UART, PM25] Reading data...
19:52:22:222 -> [UART, PM25] Data not available.
19:52:22:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:222 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:222 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:242 -> [UART, PM25] Reading data...
19:52:22:243 -> [UART, PM25] Data not available.
19:52:22:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:243 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:243 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:267 -> [UART, PM25] Reading data...
19:52:22:267 -> [UART, PM25] Data not available.
19:52:22:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:268 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:268 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:284 -> [UART, PM25] Reading data...
19:52:22:285 -> [UART, PM25] Data not available.
19:52:22:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:285 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:285 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:305 -> [UART, PM25] Reading data...
19:52:22:306 -> [UART, PM25] Data not available.
19:52:22:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:306 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:306 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:326 -> [UART, PM25] Reading data...
19:52:22:327 -> [UART, PM25] Data not available.
19:52:22:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:327 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:327 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:347 -> [UART, PM25] Reading data...
19:52:22:348 -> [UART, PM25] Data not available.
19:52:22:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:348 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:348 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:368 -> [UART, PM25] Reading data...
19:52:22:369 -> [UART, PM25] Data not available.
19:52:22:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:369 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:369 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:389 -> [UART, PM25] Reading data...
19:52:22:390 -> [UART, PM25] Data not available.
19:52:22:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:390 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:390 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:410 -> [UART, PM25] Reading data...
19:52:22:411 -> [UART, PM25] Data not available.
19:52:22:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:411 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:411 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:431 -> [UART, PM25] Reading data...
19:52:22:432 -> [UART, PM25] Data not available.
19:52:22:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:432 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:432 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:453 -> [UART, PM25] Reading data...
19:52:22:453 -> [UART, PM25] Data not available.
19:52:22:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:453 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:453 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:473 -> [UART, PM25] Reading data...
19:52:22:474 -> [UART, PM25] Data not available.
19:52:22:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:474 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:474 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:494 -> [UART, PM25] Reading data...
19:52:22:495 -> [UART, PM25] Data not available.
19:52:22:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:495 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:495 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:516 -> [UART, PM25] Reading data...
19:52:22:516 -> [UART, PM25] Data not available.
19:52:22:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:516 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:516 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:536 -> [UART, PM25] Reading data...
19:52:22:537 -> [UART, PM25] Data not available.
19:52:22:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:537 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:537 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:557 -> [UART, PM25] Reading data...
19:52:22:558 -> [UART, PM25] Data not available.
19:52:22:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:558 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:558 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:578 -> [UART, PM25] Reading data...
19:52:22:579 -> [UART, PM25] Data not available.
19:52:22:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:579 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:579 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:599 -> [UART, PM25] Reading data...
19:52:22:600 -> [UART, PM25] Data not available.
19:52:22:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:600 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:600 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:620 -> [UART, PM25] Reading data...
19:52:22:621 -> [UART, PM25] Data not available.
19:52:22:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:621 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:621 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:641 -> [UART, PM25] Reading data...
19:52:22:642 -> [UART, PM25] Data not available.
19:52:22:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:642 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:642 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:666 -> [UART, PM25] Reading data...
19:52:22:698 -> [UART, PM25] Data not available.
19:52:22:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:698 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:698 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:698 -> [UART, PM25] Reading data...
19:52:22:698 -> [UART, PM25] Data not available.
19:52:22:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:698 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:698 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:704 -> [UART, PM25] Reading data...
19:52:22:705 -> [UART, PM25] Data not available.
19:52:22:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:705 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:705 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:725 -> [UART, PM25] Reading data...
19:52:22:726 -> [UART, PM25] Data not available.
19:52:22:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:726 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:726 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:746 -> [UART, PM25] Reading data...
19:52:22:747 -> [UART, PM25] Data not available.
19:52:22:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:747 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:747 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:782 -> [UART, PM25] Reading data...
19:52:22:782 -> [UART, PM25] Data not available.
19:52:22:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:782 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:782 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:789 -> [UART, PM25] Reading data...
19:52:22:789 -> [UART, PM25] Data not available.
19:52:22:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:789 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:789 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:809 -> [UART, PM25] Reading data...
19:52:22:810 -> [UART, PM25] Data not available.
19:52:22:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:810 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:810 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:830 -> [UART, PM25] Reading data...
19:52:22:831 -> [UART, PM25] Data not available.
19:52:22:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:831 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:831 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:851 -> [UART, PM25] Reading data...
19:52:22:852 -> [UART, PM25] Data not available.
19:52:22:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:852 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:852 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:872 -> [UART, PM25] Reading data...
19:52:22:873 -> [UART, PM25] Data not available.
19:52:22:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:873 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:873 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:893 -> [UART, PM25] Reading data...
19:52:22:894 -> [UART, PM25] Data not available.
19:52:22:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:894 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:894 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:914 -> [UART, PM25] Reading data...
19:52:22:915 -> [UART, PM25] Data not available.
19:52:22:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:915 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:915 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:935 -> [UART, PM25] Reading data...
19:52:22:936 -> [UART, PM25] Data not available.
19:52:22:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:936 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:936 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:956 -> [UART, PM25] Reading data...
19:52:22:957 -> [UART, PM25] Data not available.
19:52:22:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:957 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:957 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:977 -> [UART, PM25] Reading data...
19:52:22:977 -> [UART, PM25] Data not available.
19:52:22:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:22:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:22:978 -> [UART, PM25] Uart available, clearing write errors..
19:52:22:978 -> [UART, PM25] Uart available, resetting event queue..
19:52:22:998 -> [UART, PM25] Reading data...
19:52:23:004 -> [UART, PM25] Data not available.
19:52:23:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:004 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:004 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:020 -> [UART, PM25] Reading data...
19:52:23:020 -> [UART, PM25] Data not available.
19:52:23:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:020 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:020 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:040 -> [UART, PM25] Reading data...
19:52:23:041 -> [UART, PM25] Data not available.
19:52:23:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:041 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:041 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:061 -> [UART, PM25] Reading data...
19:52:23:062 -> [UART, PM25] Data not available.
19:52:23:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:062 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:062 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:082 -> [UART, PM25] Reading data...
19:52:23:083 -> [UART, PM25] Data not available.
19:52:23:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:083 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:083 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:103 -> [UART, PM25] Reading data...
19:52:23:104 -> [UART, PM25] Data not available.
19:52:23:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:104 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:104 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:124 -> [UART, PM25] Reading data...
19:52:23:125 -> [UART, PM25] Data not available.
19:52:23:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:125 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:125 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:146 -> [UART, PM25] Reading data...
19:52:23:146 -> [UART, PM25] Data not available.
19:52:23:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:146 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:146 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:166 -> [UART, PM25] Reading data...
19:52:23:167 -> [UART, PM25] Data not available.
19:52:23:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:167 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:167 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:187 -> [UART, PM25] Reading data...
19:52:23:188 -> [UART, PM25] Data not available.
19:52:23:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:188 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:188 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:208 -> [UART, PM25] Reading data...
19:52:23:209 -> [UART, PM25] Data not available.
19:52:23:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:209 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:209 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:229 -> [UART, PM25] Reading data...
19:52:23:230 -> [UART, PM25] Data not available.
19:52:23:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:230 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:230 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:252 -> [UART, PM25] Reading data...
19:52:23:252 -> [UART, PM25] Data not available.
19:52:23:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:252 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:252 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:271 -> [UART, PM25] Reading data...
19:52:23:272 -> [UART, PM25] Data not available.
19:52:23:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:272 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:272 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:306 -> [UART, PM25] Reading data...
19:52:23:306 -> [UART, PM25] Data not available.
19:52:23:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:306 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:306 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:313 -> [UART, PM25] Reading data...
19:52:23:314 -> [UART, PM25] Data not available.
19:52:23:314 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:314 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:314 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:314 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:334 -> [UART, PM25] Reading data...
19:52:23:335 -> [UART, PM25] Data not available.
19:52:23:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:335 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:335 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:355 -> [UART, PM25] Reading data...
19:52:23:355 -> [UART, PM25] Data not available.
19:52:23:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:356 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:356 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:376 -> [UART, PM25] Reading data...
19:52:23:376 -> [UART, PM25] Data not available.
19:52:23:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:376 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:376 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:397 -> [UART, PM25] Reading data...
19:52:23:398 -> [UART, PM25] Data not available.
19:52:23:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:398 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:398 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:418 -> [UART, PM25] Reading data...
19:52:23:419 -> [UART, PM25] Data not available.
19:52:23:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:419 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:419 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:439 -> [UART, PM25] Reading data...
19:52:23:440 -> [UART, PM25] Data not available.
19:52:23:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:440 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:440 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:460 -> [UART, PM25] Reading data...
19:52:23:461 -> [UART, PM25] Data not available.
19:52:23:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:461 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:461 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:481 -> [UART, PM25] Reading data...
19:52:23:482 -> [UART, PM25] Data not available.
19:52:23:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:482 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:482 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:502 -> [UART, PM25] Reading data...
19:52:23:503 -> [UART, PM25] Data not available.
19:52:23:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:503 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:503 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:523 -> [UART, PM25] Reading data...
19:52:23:524 -> [UART, PM25] Data not available.
19:52:23:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:524 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:524 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:544 -> [UART, PM25] Reading data...
19:52:23:545 -> [UART, PM25] Data not available.
19:52:23:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:545 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:545 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:565 -> [UART, PM25] Reading data...
19:52:23:566 -> [UART, PM25] Data not available.
19:52:23:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:566 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:566 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:586 -> [UART, PM25] Reading data...
19:52:23:587 -> [UART, PM25] Data not available.
19:52:23:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:587 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:587 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:607 -> [UART, PM25] Reading data...
19:52:23:608 -> [UART, PM25] Data not available.
19:52:23:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:608 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:608 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:629 -> [UART, PM25] Reading data...
19:52:23:629 -> [UART, PM25] Data not available.
19:52:23:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:629 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:629 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:650 -> [UART, PM25] Reading data...
19:52:23:650 -> [UART, PM25] Data not available.
19:52:23:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:650 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:650 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:670 -> [UART, PM25] Reading data...
19:52:23:671 -> [UART, PM25] Data not available.
19:52:23:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:671 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:671 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:691 -> [UART, PM25] Reading data...
19:52:23:692 -> [UART, PM25] Data not available.
19:52:23:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:692 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:692 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:712 -> [UART, PM25] Reading data...
19:52:23:713 -> [UART, PM25] Data not available.
19:52:23:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:713 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:713 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:734 -> [UART, PM25] Reading data...
19:52:23:734 -> [UART, PM25] Data not available.
19:52:23:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:734 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:734 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:755 -> [UART, PM25] Reading data...
19:52:23:755 -> [UART, PM25] Data not available.
19:52:23:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:755 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:755 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:775 -> [UART, PM25] Reading data...
19:52:23:776 -> [UART, PM25] Data not available.
19:52:23:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:776 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:776 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:796 -> [UART, PM25] Reading data...
19:52:23:797 -> [UART, PM25] Data not available.
19:52:23:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:797 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:797 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:821 -> [UART, PM25] Reading data...
19:52:23:823 -> [UART, PM25] Data not available.
19:52:23:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:823 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:823 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:839 -> [UART, PM25] Reading data...
19:52:23:839 -> [UART, PM25] Data not available.
19:52:23:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:839 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:839 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:860 -> [UART, PM25] Reading data...
19:52:23:863 -> [UART, PM25] Data not available.
19:52:23:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:863 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:863 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:880 -> [UART, PM25] Reading data...
19:52:23:881 -> [UART, PM25] Data not available.
19:52:23:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:881 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:881 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:902 -> [UART, PM25] Reading data...
19:52:23:902 -> [UART, PM25] Data not available.
19:52:23:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:902 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:902 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:923 -> [UART, PM25] Reading data...
19:52:23:923 -> [UART, PM25] Data not available.
19:52:23:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:923 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:923 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:944 -> [UART, PM25] Reading data...
19:52:23:944 -> [UART, PM25] Data not available.
19:52:23:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:945 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:945 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:965 -> [UART, PM25] Reading data...
19:52:23:965 -> [UART, PM25] Data not available.
19:52:23:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:965 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:965 -> [UART, PM25] Uart available, resetting event queue..
19:52:23:985 -> [UART, PM25] Reading data...
19:52:23:986 -> [UART, PM25] Data not available.
19:52:23:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:23:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:23:986 -> [UART, PM25] Uart available, clearing write errors..
19:52:23:986 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:006 -> [UART, PM25] Reading data...
19:52:24:007 -> [UART, PM25] Data not available.
19:52:24:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:007 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:007 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:030 -> [UART, PM25] Reading data...
19:52:24:031 -> [UART, PM25] Data not available.
19:52:24:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:031 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:031 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:052 -> [UART, PM25] Reading data...
19:52:24:052 -> [UART, PM25] Data not available.
19:52:24:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:069 -> [UART, PM25] Reading data...
19:52:24:070 -> [UART, PM25] Data not available.
19:52:24:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:070 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:070 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:090 -> [UART, PM25] Reading data...
19:52:24:091 -> [UART, PM25] Data not available.
19:52:24:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:091 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:091 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:124 -> [UART, PM25] Reading data...
19:52:24:150 -> [UART, PM25] Data not available.
19:52:24:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:150 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:150 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:150 -> [UART, PM25] Reading data...
19:52:24:150 -> [UART, PM25] Data not available.
19:52:24:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:150 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:150 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:157 -> [UART, PM25] Reading data...
19:52:24:157 -> [UART, PM25] Data not available.
19:52:24:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:157 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:157 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:174 -> [UART, PM25] Reading data...
19:52:24:175 -> [UART, PM25] Data not available.
19:52:24:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:175 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:175 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:195 -> [UART, PM25] Reading data...
19:52:24:196 -> [UART, PM25] Data not available.
19:52:24:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:196 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:196 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:216 -> [UART, PM25] Reading data...
19:52:24:217 -> [UART, PM25] Data not available.
19:52:24:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:217 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:217 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:237 -> [UART, PM25] Reading data...
19:52:24:238 -> [UART, PM25] Data not available.
19:52:24:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:238 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:238 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:258 -> [UART, PM25] Reading data...
19:52:24:259 -> [UART, PM25] Data not available.
19:52:24:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:259 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:259 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:279 -> [UART, PM25] Reading data...
19:52:24:280 -> [UART, PM25] Data not available.
19:52:24:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:280 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:280 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:300 -> [UART, PM25] Reading data...
19:52:24:301 -> [UART, PM25] Data not available.
19:52:24:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:301 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:301 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:338 -> [UART, PM25] Reading data...
19:52:24:341 -> [UART, PM25] Data not available.
19:52:24:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:341 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:341 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:342 -> [UART, PM25] Reading data...
19:52:24:343 -> [UART, PM25] Data not available.
19:52:24:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:343 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:343 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:364 -> [UART, PM25] Reading data...
19:52:24:364 -> [UART, PM25] Data not available.
19:52:24:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:364 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:364 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:386 -> [UART, PM25] Reading data...
19:52:24:386 -> [UART, PM25] Data not available.
19:52:24:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:386 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:386 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:406 -> [UART, PM25] Reading data...
19:52:24:406 -> [UART, PM25] Data not available.
19:52:24:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:406 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:406 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:426 -> [UART, PM25] Reading data...
19:52:24:427 -> [UART, PM25] Data not available.
19:52:24:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:427 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:427 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:449 -> [UART, PM25] Reading data...
19:52:24:450 -> [UART, PM25] Data not available.
19:52:24:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:450 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:450 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:468 -> [UART, PM25] Reading data...
19:52:24:469 -> [UART, PM25] Data not available.
19:52:24:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:469 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:469 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:490 -> [UART, PM25] Reading data...
19:52:24:490 -> [UART, PM25] Data not available.
19:52:24:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:490 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:490 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:511 -> [UART, PM25] Reading data...
19:52:24:511 -> [UART, PM25] Data not available.
19:52:24:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:511 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:511 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:531 -> [UART, PM25] Reading data...
19:52:24:532 -> [UART, PM25] Data not available.
19:52:24:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:532 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:532 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:553 -> [UART, PM25] Reading data...
19:52:24:553 -> [UART, PM25] Data not available.
19:52:24:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:553 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:553 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:573 -> [UART, PM25] Reading data...
19:52:24:574 -> [UART, PM25] Data not available.
19:52:24:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:574 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:574 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:594 -> [UART, PM25] Reading data...
19:52:24:594 -> [UART, PM25] Data not available.
19:52:24:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:595 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:595 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:616 -> [UART, PM25] Reading data...
19:52:24:616 -> [UART, PM25] Data not available.
19:52:24:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:616 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:616 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:636 -> [UART, PM25] Reading data...
19:52:24:636 -> [UART, PM25] Data not available.
19:52:24:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:637 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:637 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:658 -> [UART, PM25] Reading data...
19:52:24:658 -> [UART, PM25] Data not available.
19:52:24:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:658 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:658 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:678 -> [UART, PM25] Reading data...
19:52:24:679 -> [UART, PM25] Data not available.
19:52:24:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:679 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:679 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:700 -> [UART, PM25] Reading data...
19:52:24:700 -> [UART, PM25] Data not available.
19:52:24:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:700 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:700 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:720 -> [UART, PM25] Reading data...
19:52:24:725 -> [UART, PM25] Data not available.
19:52:24:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:725 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:725 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:741 -> [UART, PM25] Reading data...
19:52:24:742 -> [UART, PM25] Data not available.
19:52:24:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:742 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:742 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:763 -> [UART, PM25] Reading data...
19:52:24:763 -> [UART, PM25] Data not available.
19:52:24:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:763 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:763 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:783 -> [UART, PM25] Reading data...
19:52:24:784 -> [UART, PM25] Data not available.
19:52:24:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:784 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:784 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:804 -> [UART, PM25] Reading data...
19:52:24:805 -> [UART, PM25] Data not available.
19:52:24:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:805 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:805 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:825 -> [UART, PM25] Reading data...
19:52:24:826 -> [UART, PM25] Data not available.
19:52:24:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:826 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:826 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:860 -> [UART, PM25] Reading data...
19:52:24:861 -> [UART, PM25] Data not available.
19:52:24:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:861 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:861 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:867 -> [UART, PM25] Reading data...
19:52:24:868 -> [UART, PM25] Data not available.
19:52:24:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:868 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:868 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:888 -> [UART, PM25] Reading data...
19:52:24:889 -> [UART, PM25] Data not available.
19:52:24:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:889 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:889 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:909 -> [UART, PM25] Reading data...
19:52:24:910 -> [UART, PM25] Data not available.
19:52:24:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:910 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:910 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:930 -> [UART, PM25] Reading data...
19:52:24:931 -> [UART, PM25] Data not available.
19:52:24:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:931 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:931 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:952 -> [UART, PM25] Reading data...
19:52:24:952 -> [UART, PM25] Data not available.
19:52:24:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:952 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:952 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:973 -> [UART, PM25] Reading data...
19:52:24:973 -> [UART, PM25] Data not available.
19:52:24:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:973 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:973 -> [UART, PM25] Uart available, resetting event queue..
19:52:24:994 -> [UART, PM25] Reading data...
19:52:24:994 -> [UART, PM25] Data not available.
19:52:24:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:24:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:24:994 -> [UART, PM25] Uart available, clearing write errors..
19:52:24:994 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:014 -> [UART, PM25] Reading data...
19:52:25:015 -> [UART, PM25] Data not available.
19:52:25:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:015 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:015 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:036 -> [UART, PM25] Reading data...
19:52:25:037 -> [UART, PM25] Data not available.
19:52:25:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:037 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:037 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:056 -> [UART, PM25] Reading data...
19:52:25:057 -> [UART, PM25] Data not available.
19:52:25:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:057 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:057 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:077 -> [UART, PM25] Reading data...
19:52:25:078 -> [UART, PM25] Data not available.
19:52:25:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:078 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:078 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:078 -> PING!
19:52:25:292 -> [UART, PM25] Reading data...
19:52:25:292 -> [UART, PM25] Data not available.
19:52:25:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:292 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:292 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:312 -> [UART, PM25] Reading data...
19:52:25:313 -> [UART, PM25] Data not available.
19:52:25:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:313 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:313 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:334 -> [UART, PM25] Reading data...
19:52:25:335 -> [UART, PM25] Data not available.
19:52:25:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:335 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:335 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:355 -> [UART, PM25] Reading data...
19:52:25:355 -> [UART, PM25] Data not available.
19:52:25:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:355 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:355 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:384 -> [UART, PM25] Reading data...
19:52:25:386 -> [UART, PM25] Data not available.
19:52:25:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:386 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:386 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:397 -> [UART, PM25] Reading data...
19:52:25:397 -> [UART, PM25] Data not available.
19:52:25:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:397 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:397 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:418 -> [UART, PM25] Reading data...
19:52:25:418 -> [UART, PM25] Data not available.
19:52:25:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:418 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:418 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:438 -> [UART, PM25] Reading data...
19:52:25:439 -> [UART, PM25] Data not available.
19:52:25:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:439 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:439 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:459 -> [UART, PM25] Reading data...
19:52:25:459 -> [UART, PM25] Data not available.
19:52:25:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:460 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:460 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:481 -> [UART, PM25] Reading data...
19:52:25:481 -> [UART, PM25] Data not available.
19:52:25:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:481 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:481 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:501 -> [UART, PM25] Reading data...
19:52:25:502 -> [UART, PM25] Data not available.
19:52:25:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:502 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:502 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:522 -> [UART, PM25] Reading data...
19:52:25:523 -> [UART, PM25] Data not available.
19:52:25:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:523 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:523 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:543 -> [UART, PM25] Reading data...
19:52:25:544 -> [UART, PM25] Data not available.
19:52:25:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:544 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:544 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:564 -> [UART, PM25] Reading data...
19:52:25:565 -> [UART, PM25] Data not available.
19:52:25:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:565 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:565 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:586 -> [UART, PM25] Reading data...
19:52:25:587 -> [UART, PM25] Data not available.
19:52:25:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:587 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:587 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:606 -> [UART, PM25] Reading data...
19:52:25:607 -> [UART, PM25] Data not available.
19:52:25:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:607 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:607 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:627 -> [UART, PM25] Reading data...
19:52:25:628 -> [UART, PM25] Data not available.
19:52:25:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:628 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:628 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:648 -> [UART, PM25] Reading data...
19:52:25:649 -> [UART, PM25] Data not available.
19:52:25:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:649 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:649 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:669 -> [UART, PM25] Reading data...
19:52:25:670 -> [UART, PM25] Data not available.
19:52:25:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:670 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:670 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:690 -> [UART, PM25] Reading data...
19:52:25:691 -> [UART, PM25] Data not available.
19:52:25:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:691 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:691 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:711 -> [UART, PM25] Reading data...
19:52:25:712 -> [UART, PM25] Data not available.
19:52:25:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:712 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:712 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:732 -> [UART, PM25] Reading data...
19:52:25:733 -> [UART, PM25] Data not available.
19:52:25:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:733 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:733 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:757 -> [UART, PM25] Reading data...
19:52:25:784 -> [UART, PM25] Data not available.
19:52:25:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:784 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:784 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:784 -> [UART, PM25] Reading data...
19:52:25:784 -> [UART, PM25] Data not available.
19:52:25:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:784 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:784 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:795 -> [UART, PM25] Reading data...
19:52:25:805 -> [UART, PM25] Data not available.
19:52:25:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:805 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:805 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:816 -> [UART, PM25] Reading data...
19:52:25:817 -> [UART, PM25] Data not available.
19:52:25:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:817 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:817 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:840 -> [UART, PM25] Reading data...
19:52:25:845 -> [UART, PM25] Data not available.
19:52:25:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:845 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:845 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:874 -> [UART, PM25] Reading data...
19:52:25:925 -> [UART, PM25] Data not available.
19:52:25:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:925 -> [UART, PM25] Reading data...
19:52:25:925 -> [UART, PM25] Data not available.
19:52:25:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:925 -> [UART, PM25] Reading data...
19:52:25:925 -> [UART, PM25] Data not available.
19:52:25:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:926 -> [UART, PM25] Reading data...
19:52:25:926 -> [UART, PM25] Data not available.
19:52:25:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:926 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:926 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:943 -> [UART, PM25] Reading data...
19:52:25:944 -> [UART, PM25] Data not available.
19:52:25:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:944 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:944 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:963 -> [UART, PM25] Reading data...
19:52:25:964 -> [UART, PM25] Data not available.
19:52:25:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:964 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:964 -> [UART, PM25] Uart available, resetting event queue..
19:52:25:984 -> [UART, PM25] Reading data...
19:52:25:985 -> [UART, PM25] Data not available.
19:52:25:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:25:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:25:985 -> [UART, PM25] Uart available, clearing write errors..
19:52:25:985 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:005 -> [UART, PM25] Reading data...
19:52:26:006 -> [UART, PM25] Data not available.
19:52:26:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:006 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:006 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:026 -> [UART, PM25] Reading data...
19:52:26:027 -> [UART, PM25] Data not available.
19:52:26:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:027 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:027 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:047 -> [UART, PM25] Reading data...
19:52:26:048 -> [UART, PM25] Data not available.
19:52:26:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:048 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:048 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:069 -> [UART, PM25] Reading data...
19:52:26:069 -> [UART, PM25] Data not available.
19:52:26:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:069 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:069 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:090 -> [UART, PM25] Reading data...
19:52:26:090 -> [UART, PM25] Data not available.
19:52:26:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:090 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:090 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:111 -> [UART, PM25] Reading data...
19:52:26:111 -> [UART, PM25] Data not available.
19:52:26:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:111 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:111 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:132 -> [UART, PM25] Reading data...
19:52:26:132 -> [UART, PM25] Data not available.
19:52:26:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:132 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:132 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:153 -> [UART, PM25] Reading data...
19:52:26:153 -> [UART, PM25] Data not available.
19:52:26:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:153 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:153 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:173 -> [UART, PM25] Reading data...
19:52:26:174 -> [UART, PM25] Data not available.
19:52:26:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:174 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:174 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:195 -> [UART, PM25] Reading data...
19:52:26:195 -> [UART, PM25] Data not available.
19:52:26:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:195 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:195 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:215 -> [UART, PM25] Reading data...
19:52:26:216 -> [UART, PM25] Data not available.
19:52:26:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:216 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:216 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:236 -> [UART, PM25] Reading data...
19:52:26:237 -> [UART, PM25] Data not available.
19:52:26:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:237 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:237 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:258 -> [UART, PM25] Reading data...
19:52:26:258 -> [UART, PM25] Data not available.
19:52:26:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:258 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:258 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:278 -> [UART, PM25] Reading data...
19:52:26:279 -> [UART, PM25] Data not available.
19:52:26:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:279 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:279 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:299 -> [UART, PM25] Reading data...
19:52:26:300 -> [UART, PM25] Data not available.
19:52:26:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:300 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:300 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:321 -> [UART, PM25] Reading data...
19:52:26:321 -> [UART, PM25] Data not available.
19:52:26:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:321 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:321 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:341 -> [UART, PM25] Reading data...
19:52:26:342 -> [UART, PM25] Data not available.
19:52:26:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:342 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:342 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:362 -> [UART, PM25] Reading data...
19:52:26:363 -> [UART, PM25] Data not available.
19:52:26:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:363 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:363 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:383 -> [UART, PM25] Reading data...
19:52:26:384 -> [UART, PM25] Data not available.
19:52:26:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:384 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:384 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:404 -> [UART, PM25] Reading data...
19:52:26:405 -> [UART, PM25] Data not available.
19:52:26:405 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:405 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:405 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:405 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:438 -> [UART, PM25] Reading data...
19:52:26:439 -> [UART, PM25] Data not available.
19:52:26:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:439 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:439 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:446 -> [UART, PM25] Reading data...
19:52:26:447 -> [UART, PM25] Data not available.
19:52:26:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:447 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:447 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:467 -> [UART, PM25] Reading data...
19:52:26:468 -> [UART, PM25] Data not available.
19:52:26:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:468 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:468 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:488 -> [UART, PM25] Reading data...
19:52:26:489 -> [UART, PM25] Data not available.
19:52:26:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:489 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:489 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:509 -> [UART, PM25] Reading data...
19:52:26:510 -> [UART, PM25] Data not available.
19:52:26:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:510 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:510 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:530 -> [UART, PM25] Reading data...
19:52:26:531 -> [UART, PM25] Data not available.
19:52:26:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:531 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:531 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:551 -> [UART, PM25] Reading data...
19:52:26:552 -> [UART, PM25] Data not available.
19:52:26:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:552 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:552 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:572 -> [UART, PM25] Reading data...
19:52:26:573 -> [UART, PM25] Data not available.
19:52:26:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:573 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:573 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:594 -> [UART, PM25] Reading data...
19:52:26:594 -> [UART, PM25] Data not available.
19:52:26:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:594 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:594 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:615 -> [UART, PM25] Reading data...
19:52:26:615 -> [UART, PM25] Data not available.
19:52:26:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:615 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:615 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:635 -> [UART, PM25] Reading data...
19:52:26:636 -> [UART, PM25] Data not available.
19:52:26:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:636 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:636 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:656 -> [UART, PM25] Reading data...
19:52:26:657 -> [UART, PM25] Data not available.
19:52:26:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:657 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:657 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:677 -> [UART, PM25] Reading data...
19:52:26:678 -> [UART, PM25] Data not available.
19:52:26:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:678 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:678 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:698 -> [UART, PM25] Reading data...
19:52:26:699 -> [UART, PM25] Data not available.
19:52:26:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:699 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:699 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:720 -> [UART, PM25] Reading data...
19:52:26:720 -> [UART, PM25] Data not available.
19:52:26:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:720 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:720 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:740 -> [UART, PM25] Reading data...
19:52:26:741 -> [UART, PM25] Data not available.
19:52:26:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:741 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:741 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:762 -> [UART, PM25] Reading data...
19:52:26:762 -> [UART, PM25] Data not available.
19:52:26:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:782 -> [UART, PM25] Reading data...
19:52:26:783 -> [UART, PM25] Data not available.
19:52:26:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:783 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:783 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:804 -> [UART, PM25] Reading data...
19:52:26:804 -> [UART, PM25] Data not available.
19:52:26:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:804 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:804 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:825 -> [UART, PM25] Reading data...
19:52:26:825 -> [UART, PM25] Data not available.
19:52:26:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:825 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:825 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:846 -> [UART, PM25] Reading data...
19:52:26:846 -> [UART, PM25] Data not available.
19:52:26:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:846 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:846 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:866 -> [UART, PM25] Reading data...
19:52:26:867 -> [UART, PM25] Data not available.
19:52:26:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:867 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:867 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:887 -> [UART, PM25] Reading data...
19:52:26:888 -> [UART, PM25] Data not available.
19:52:26:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:888 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:888 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:909 -> [UART, PM25] Reading data...
19:52:26:909 -> [UART, PM25] Data not available.
19:52:26:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:909 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:909 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:929 -> [UART, PM25] Reading data...
19:52:26:930 -> [UART, PM25] Data not available.
19:52:26:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:930 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:930 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:951 -> [UART, PM25] Reading data...
19:52:26:952 -> [UART, PM25] Data not available.
19:52:26:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:952 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:952 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:992 -> [UART, PM25] Reading data...
19:52:26:972 -> [UART, PM25] Data not available.
19:52:26:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:972 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:972 -> [UART, PM25] Uart available, resetting event queue..
19:52:26:971 -> [UART, PM25] Reading data...
19:52:26:993 -> [UART, PM25] Data not available.
19:52:26:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:26:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:26:993 -> [UART, PM25] Uart available, clearing write errors..
19:52:26:993 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:014 -> [UART, PM25] Reading data...
19:52:27:014 -> [UART, PM25] Data not available.
19:52:27:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:014 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:014 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:034 -> [UART, PM25] Reading data...
19:52:27:035 -> [UART, PM25] Data not available.
19:52:27:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:035 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:035 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:055 -> [UART, PM25] Reading data...
19:52:27:056 -> [UART, PM25] Data not available.
19:52:27:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:056 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:056 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:076 -> [UART, PM25] Reading data...
19:52:27:077 -> [UART, PM25] Data not available.
19:52:27:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:097 -> [UART, PM25] Reading data...
19:52:27:098 -> [UART, PM25] Data not available.
19:52:27:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:119 -> [UART, PM25] Reading data...
19:52:27:119 -> [UART, PM25] Data not available.
19:52:27:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:119 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:119 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:139 -> [UART, PM25] Reading data...
19:52:27:140 -> [UART, PM25] Data not available.
19:52:27:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:140 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:140 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:160 -> [UART, PM25] Reading data...
19:52:27:161 -> [UART, PM25] Data not available.
19:52:27:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:181 -> [UART, PM25] Reading data...
19:52:27:182 -> [UART, PM25] Data not available.
19:52:27:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:182 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:182 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:202 -> [UART, PM25] Reading data...
19:52:27:203 -> [UART, PM25] Data not available.
19:52:27:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:203 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:203 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:224 -> [UART, PM25] Reading data...
19:52:27:224 -> [UART, PM25] Data not available.
19:52:27:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:224 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:224 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:244 -> [UART, PM25] Reading data...
19:52:27:245 -> [UART, PM25] Data not available.
19:52:27:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:245 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:245 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:265 -> [UART, PM25] Reading data...
19:52:27:266 -> [UART, PM25] Data not available.
19:52:27:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:266 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:266 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:286 -> [UART, PM25] Reading data...
19:52:27:287 -> [UART, PM25] Data not available.
19:52:27:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:287 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:287 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:307 -> [UART, PM25] Reading data...
19:52:27:308 -> [UART, PM25] Data not available.
19:52:27:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:329 -> [UART, PM25] Reading data...
19:52:27:329 -> [UART, PM25] Data not available.
19:52:27:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:329 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:329 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:349 -> [UART, PM25] Reading data...
19:52:27:350 -> [UART, PM25] Data not available.
19:52:27:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:350 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:350 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:370 -> [UART, PM25] Reading data...
19:52:27:371 -> [UART, PM25] Data not available.
19:52:27:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:371 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:371 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:391 -> [UART, PM25] Reading data...
19:52:27:392 -> [UART, PM25] Data not available.
19:52:27:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:392 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:392 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:412 -> [UART, PM25] Reading data...
19:52:27:413 -> [UART, PM25] Data not available.
19:52:27:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:413 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:413 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:434 -> [UART, PM25] Reading data...
19:52:27:434 -> [UART, PM25] Data not available.
19:52:27:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:434 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:434 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:466 -> [UART, PM25] Reading data...
19:52:27:467 -> [UART, PM25] Data not available.
19:52:27:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:467 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:467 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:496 -> [UART, PM25] Reading data...
19:52:27:507 -> [UART, PM25] Data not available.
19:52:27:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:507 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:507 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:507 -> [UART, PM25] Reading data...
19:52:27:507 -> [UART, PM25] Data not available.
19:52:27:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:507 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:507 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:521 -> [UART, PM25] Reading data...
19:52:27:521 -> [UART, PM25] Data not available.
19:52:27:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:521 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:521 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:538 -> [UART, PM25] Reading data...
19:52:27:538 -> [UART, PM25] Data not available.
19:52:27:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:539 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:539 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:559 -> [UART, PM25] Reading data...
19:52:27:560 -> [UART, PM25] Data not available.
19:52:27:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:560 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:560 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:580 -> [UART, PM25] Reading data...
19:52:27:581 -> [UART, PM25] Data not available.
19:52:27:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:581 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:581 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:604 -> [UART, PM25] Reading data...
19:52:27:604 -> [UART, PM25] Data not available.
19:52:27:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:604 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:604 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:622 -> [UART, PM25] Reading data...
19:52:27:623 -> [UART, PM25] Data not available.
19:52:27:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:643 -> [UART, PM25] Reading data...
19:52:27:644 -> [UART, PM25] Data not available.
19:52:27:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:664 -> [UART, PM25] Reading data...
19:52:27:665 -> [UART, PM25] Data not available.
19:52:27:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:665 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:665 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:685 -> [UART, PM25] Reading data...
19:52:27:686 -> [UART, PM25] Data not available.
19:52:27:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:686 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:686 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:706 -> [UART, PM25] Reading data...
19:52:27:707 -> [UART, PM25] Data not available.
19:52:27:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:707 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:707 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:728 -> [UART, PM25] Reading data...
19:52:27:728 -> [UART, PM25] Data not available.
19:52:27:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:728 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:728 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:748 -> [UART, PM25] Reading data...
19:52:27:748 -> [UART, PM25] Data not available.
19:52:27:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:754 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:754 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:769 -> [UART, PM25] Reading data...
19:52:27:770 -> [UART, PM25] Data not available.
19:52:27:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:770 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:770 -> [UART, PM25] Uart available, resetting event queue..

19:52:27:791 -> [UART, PM25] Data not available.
19:52:27:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:791 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:791 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:790 -> [UART, PM25] Reading data...19:52:27:811 -> [UART, PM25] Reading data...
19:52:27:812 -> [UART, PM25] Data not available.
19:52:27:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:832 -> [UART, PM25] Reading data...
19:52:27:833 -> [UART, PM25] Data not available.
19:52:27:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:833 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:833 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:853 -> [UART, PM25] Reading data...
19:52:27:854 -> [UART, PM25] Data not available.
19:52:27:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:874 -> [UART, PM25] Reading data...
19:52:27:875 -> [UART, PM25] Data not available.
19:52:27:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:895 -> [UART, PM25] Reading data...
19:52:27:896 -> [UART, PM25] Data not available.
19:52:27:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:916 -> [UART, PM25] Reading data...
19:52:27:917 -> [UART, PM25] Data not available.
19:52:27:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:917 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:917 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:938 -> [UART, PM25] Reading data...
19:52:27:938 -> [UART, PM25] Data not available.
19:52:27:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:958 -> [UART, PM25] Reading data...
19:52:27:959 -> [UART, PM25] Data not available.
19:52:27:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:959 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:959 -> [UART, PM25] Uart available, resetting event queue..
19:52:27:995 -> [UART, PM25] Reading data...
19:52:27:996 -> [UART, PM25] Data not available.
19:52:27:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:27:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:27:996 -> [UART, PM25] Uart available, clearing write errors..
19:52:27:996 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:000 -> [UART, PM25] Reading data...
19:52:28:001 -> [UART, PM25] Data not available.
19:52:28:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:021 -> [UART, PM25] Reading data...
19:52:28:022 -> [UART, PM25] Data not available.
19:52:28:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:043 -> [UART, PM25] Reading data...
19:52:28:043 -> [UART, PM25] Data not available.
19:52:28:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:063 -> [UART, PM25] Reading data...
19:52:28:064 -> [UART, PM25] Data not available.
19:52:28:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:064 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:064 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:084 -> [UART, PM25] Reading data...
19:52:28:085 -> [UART, PM25] Data not available.
19:52:28:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:085 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:085 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:105 -> [UART, PM25] Reading data...
19:52:28:106 -> [UART, PM25] Data not available.
19:52:28:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:106 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:106 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:126 -> [UART, PM25] Reading data...
19:52:28:127 -> [UART, PM25] Data not available.
19:52:28:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:127 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:127 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:148 -> [UART, PM25] Reading data...
19:52:28:148 -> [UART, PM25] Data not available.
19:52:28:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:148 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:148 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:168 -> [UART, PM25] Reading data...
19:52:28:169 -> [UART, PM25] Data not available.
19:52:28:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:189 -> [UART, PM25] Reading data...
19:52:28:190 -> [UART, PM25] Data not available.
19:52:28:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:190 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:190 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:210 -> [UART, PM25] Reading data...
19:52:28:211 -> [UART, PM25] Data not available.
19:52:28:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:211 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:211 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:231 -> [UART, PM25] Reading data...
19:52:28:232 -> [UART, PM25] Data not available.
19:52:28:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:252 -> [UART, PM25] Reading data...
19:52:28:253 -> [UART, PM25] Data not available.
19:52:28:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:273 -> [UART, PM25] Reading data...
19:52:28:274 -> [UART, PM25] Data not available.
19:52:28:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:274 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:274 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:294 -> [UART, PM25] Reading data...
19:52:28:295 -> [UART, PM25] Data not available.
19:52:28:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:315 -> [UART, PM25] Reading data...
19:52:28:316 -> [UART, PM25] Data not available.
19:52:28:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:316 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:316 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:337 -> [UART, PM25] Reading data...
19:52:28:337 -> [UART, PM25] Data not available.
19:52:28:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:357 -> [UART, PM25] Reading data...
19:52:28:358 -> [UART, PM25] Data not available.
19:52:28:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:379 -> [UART, PM25] Reading data...
19:52:28:379 -> [UART, PM25] Data not available.
19:52:28:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:399 -> [UART, PM25] Reading data...
19:52:28:399 -> [UART, PM25] Data not available.
19:52:28:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:400 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:400 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:420 -> [UART, PM25] Reading data...
19:52:28:421 -> [UART, PM25] Data not available.
19:52:28:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:421 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:421 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:442 -> [UART, PM25] Reading data...
19:52:28:442 -> [UART, PM25] Data not available.
19:52:28:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:442 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:442 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:463 -> [UART, PM25] Reading data...
19:52:28:464 -> [UART, PM25] Data not available.
19:52:28:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:464 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:464 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:483 -> [UART, PM25] Reading data...
19:52:28:484 -> [UART, PM25] Data not available.
19:52:28:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:484 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:484 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:516 -> [UART, PM25] Reading data...
19:52:28:517 -> [UART, PM25] Data not available.
19:52:28:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:517 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:517 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:525 -> [UART, PM25] Reading data...
19:52:28:526 -> [UART, PM25] Data not available.
19:52:28:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:547 -> [UART, PM25] Reading data...
19:52:28:548 -> [UART, PM25] Data not available.
19:52:28:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:548 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:548 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:567 -> [UART, PM25] Reading data...
19:52:28:568 -> [UART, PM25] Data not available.
19:52:28:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:568 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:568 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:588 -> [UART, PM25] Reading data...
19:52:28:589 -> [UART, PM25] Data not available.
19:52:28:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:589 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:589 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:609 -> [UART, PM25] Reading data...
19:52:28:610 -> [UART, PM25] Data not available.
19:52:28:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:610 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:610 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:631 -> [UART, PM25] Reading data...
19:52:28:631 -> [UART, PM25] Data not available.
19:52:28:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:631 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:631 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:652 -> [UART, PM25] Reading data...
19:52:28:652 -> [UART, PM25] Data not available.
19:52:28:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:673 -> [UART, PM25] Reading data...
19:52:28:673 -> [UART, PM25] Data not available.
19:52:28:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:673 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:673 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:694 -> [UART, PM25] Reading data...
19:52:28:694 -> [UART, PM25] Data not available.
19:52:28:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:694 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:694 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:714 -> [UART, PM25] Reading data...
19:52:28:715 -> [UART, PM25] Data not available.
19:52:28:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:715 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:715 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:735 -> [UART, PM25] Reading data...
19:52:28:736 -> [UART, PM25] Data not available.
19:52:28:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:756 -> [UART, PM25] Reading data...
19:52:28:757 -> [UART, PM25] Data not available.
19:52:28:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:757 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:757 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:777 -> [UART, PM25] Reading data...
19:52:28:778 -> [UART, PM25] Data not available.
19:52:28:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:778 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:778 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:798 -> [UART, PM25] Reading data...
19:52:28:799 -> [UART, PM25] Data not available.
19:52:28:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:799 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:799 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:819 -> [UART, PM25] Reading data...
19:52:28:820 -> [UART, PM25] Data not available.
19:52:28:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:820 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:820 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:840 -> [UART, PM25] Reading data...
19:52:28:841 -> [UART, PM25] Data not available.
19:52:28:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:841 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:841 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:861 -> [UART, PM25] Reading data...
19:52:28:861 -> [UART, PM25] Data not available.
19:52:28:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:862 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:862 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:883 -> [UART, PM25] Reading data...
19:52:28:883 -> [UART, PM25] Data not available.
19:52:28:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:883 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:883 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:903 -> [UART, PM25] Reading data...
19:52:28:904 -> [UART, PM25] Data not available.
19:52:28:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:904 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:904 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:924 -> [UART, PM25] Reading data...
19:52:28:925 -> [UART, PM25] Data not available.
19:52:28:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:945 -> [UART, PM25] Reading data...
19:52:28:946 -> [UART, PM25] Data not available.
19:52:28:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:946 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:946 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:967 -> [UART, PM25] Reading data...
19:52:28:967 -> [UART, PM25] Data not available.
19:52:28:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:28:987 -> [UART, PM25] Reading data...
19:52:28:988 -> [UART, PM25] Data not available.
19:52:28:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:28:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:28:988 -> [UART, PM25] Uart available, clearing write errors..
19:52:28:988 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:008 -> [UART, PM25] Reading data...
19:52:29:009 -> [UART, PM25] Data not available.
19:52:29:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:042 -> [UART, PM25] Reading data...
19:52:29:043 -> [UART, PM25] Data not available.
19:52:29:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:050 -> [UART, PM25] Reading data...
19:52:29:051 -> [UART, PM25] Data not available.
19:52:29:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:051 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:051 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:071 -> [UART, PM25] Reading data...
19:52:29:072 -> [UART, PM25] Data not available.
19:52:29:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:072 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:072 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:092 -> [UART, PM25] Reading data...
19:52:29:093 -> [UART, PM25] Data not available.
19:52:29:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:093 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:093 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:113 -> [UART, PM25] Reading data...
19:52:29:114 -> [UART, PM25] Data not available.
19:52:29:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:114 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:114 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:134 -> [UART, PM25] Reading data...
19:52:29:135 -> [UART, PM25] Data not available.
19:52:29:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:135 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:135 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:156 -> [UART, PM25] Reading data...
19:52:29:156 -> [UART, PM25] Data not available.
19:52:29:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:176 -> [UART, PM25] Reading data...
19:52:29:177 -> [UART, PM25] Data not available.
19:52:29:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:177 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:177 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:197 -> [UART, PM25] Reading data...
19:52:29:198 -> [UART, PM25] Data not available.
19:52:29:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:218 -> [UART, PM25] Reading data...
19:52:29:219 -> [UART, PM25] Data not available.
19:52:29:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:219 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:219 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:247 -> [UART, PM25] Reading data...
19:52:29:272 -> [UART, PM25] Data not available.
19:52:29:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:272 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:272 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:272 -> [UART, PM25] Reading data...
19:52:29:272 -> [UART, PM25] Data not available.
19:52:29:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:272 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:272 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:284 -> [UART, PM25] Reading data...
19:52:29:284 -> [UART, PM25] Data not available.
19:52:29:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:284 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:284 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:302 -> [UART, PM25] Reading data...
19:52:29:303 -> [UART, PM25] Data not available.
19:52:29:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:323 -> [UART, PM25] Reading data...
19:52:29:324 -> [UART, PM25] Data not available.
19:52:29:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:324 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:324 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:344 -> [UART, PM25] Reading data...
19:52:29:345 -> [UART, PM25] Data not available.
19:52:29:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:345 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:345 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:366 -> [UART, PM25] Reading data...
19:52:29:367 -> [UART, PM25] Data not available.
19:52:29:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:367 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:367 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:386 -> [UART, PM25] Reading data...
19:52:29:387 -> [UART, PM25] Data not available.
19:52:29:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:387 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:387 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:407 -> [UART, PM25] Reading data...
19:52:29:408 -> [UART, PM25] Data not available.
19:52:29:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:408 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:408 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:428 -> [UART, PM25] Reading data...
19:52:29:429 -> [UART, PM25] Data not available.
19:52:29:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:429 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:429 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:449 -> [UART, PM25] Reading data...
19:52:29:450 -> [UART, PM25] Data not available.
19:52:29:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:450 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:450 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:471 -> [UART, PM25] Reading data...
19:52:29:471 -> [UART, PM25] Data not available.
19:52:29:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:471 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:471 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:491 -> [UART, PM25] Reading data...
19:52:29:492 -> [UART, PM25] Data not available.
19:52:29:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:492 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:492 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:512 -> [UART, PM25] Reading data...
19:52:29:513 -> [UART, PM25] Data not available.
19:52:29:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:513 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:513 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:534 -> [UART, PM25] Reading data...
19:52:29:534 -> [UART, PM25] Data not available.
19:52:29:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:534 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:534 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:569 -> [UART, PM25] Reading data...
19:52:29:571 -> [UART, PM25] Data not available.
19:52:29:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:571 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:571 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:575 -> [UART, PM25] Reading data...
19:52:29:576 -> [UART, PM25] Data not available.
19:52:29:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:576 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:576 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:597 -> [UART, PM25] Reading data...
19:52:29:597 -> [UART, PM25] Data not available.
19:52:29:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:597 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:597 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:617 -> [UART, PM25] Reading data...
19:52:29:618 -> [UART, PM25] Data not available.
19:52:29:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:618 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:618 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:638 -> [UART, PM25] Reading data...
19:52:29:639 -> [UART, PM25] Data not available.
19:52:29:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:639 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:639 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:659 -> [UART, PM25] Reading data...
19:52:29:660 -> [UART, PM25] Data not available.
19:52:29:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:660 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:660 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:681 -> [UART, PM25] Reading data...
19:52:29:681 -> [UART, PM25] Data not available.
19:52:29:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:681 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:681 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:701 -> [UART, PM25] Reading data...
19:52:29:702 -> [UART, PM25] Data not available.
19:52:29:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:702 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:702 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:722 -> [UART, PM25] Reading data...
19:52:29:723 -> [UART, PM25] Data not available.
19:52:29:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:723 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:723 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:743 -> [UART, PM25] Reading data...
19:52:29:744 -> [UART, PM25] Data not available.
19:52:29:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:744 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:744 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:764 -> [UART, PM25] Reading data...
19:52:29:765 -> [UART, PM25] Data not available.
19:52:29:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:765 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:765 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:785 -> [UART, PM25] Reading data...
19:52:29:786 -> [UART, PM25] Data not available.
19:52:29:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:29:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:29:786 -> [UART, PM25] Uart available, clearing write errors..
19:52:29:786 -> [UART, PM25] Uart available, resetting event queue..
19:52:29:786 -> PING!
19:52:30:010 -> [UART, PM25] Reading data...
19:52:30:010 -> [UART, PM25] Data not available.
19:52:30:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:010 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:010 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:031 -> [UART, PM25] Reading data...
19:52:30:031 -> [UART, PM25] Data not available.
19:52:30:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:031 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:031 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:051 -> [UART, PM25] Reading data...
19:52:30:052 -> [UART, PM25] Data not available.
19:52:30:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:087 -> [UART, PM25] Reading data...
19:52:30:087 -> [UART, PM25] Data not available.
19:52:30:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:087 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:087 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:094 -> [UART, PM25] Reading data...
19:52:30:094 -> [UART, PM25] Data not available.
19:52:30:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:094 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:094 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:114 -> [UART, PM25] Reading data...
19:52:30:115 -> [UART, PM25] Data not available.
19:52:30:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:115 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:115 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:135 -> [UART, PM25] Reading data...
19:52:30:136 -> [UART, PM25] Data not available.
19:52:30:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:136 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:136 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:156 -> [UART, PM25] Reading data...
19:52:30:157 -> [UART, PM25] Data not available.
19:52:30:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:157 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:157 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:177 -> [UART, PM25] Reading data...
19:52:30:178 -> [UART, PM25] Data not available.
19:52:30:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:178 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:178 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:199 -> [UART, PM25] Reading data...
19:52:30:199 -> [UART, PM25] Data not available.
19:52:30:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:199 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:199 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:219 -> [UART, PM25] Reading data...
19:52:30:220 -> [UART, PM25] Data not available.
19:52:30:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:220 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:220 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:240 -> [UART, PM25] Reading data...
19:52:30:241 -> [UART, PM25] Data not available.
19:52:30:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:241 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:241 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:261 -> [UART, PM25] Reading data...
19:52:30:262 -> [UART, PM25] Data not available.
19:52:30:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:262 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:262 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:282 -> [UART, PM25] Reading data...
19:52:30:283 -> [UART, PM25] Data not available.
19:52:30:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:283 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:283 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:303 -> [UART, PM25] Reading data...
19:52:30:303 -> [UART, PM25] Data not available.
19:52:30:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:304 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:304 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:324 -> [UART, PM25] Reading data...
19:52:30:325 -> [UART, PM25] Data not available.
19:52:30:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:325 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:325 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:345 -> [UART, PM25] Reading data...
19:52:30:346 -> [UART, PM25] Data not available.
19:52:30:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:346 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:346 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:366 -> [UART, PM25] Reading data...
19:52:30:367 -> [UART, PM25] Data not available.
19:52:30:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:367 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:367 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:387 -> [UART, PM25] Reading data...
19:52:30:388 -> [UART, PM25] Data not available.
19:52:30:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:388 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:388 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:409 -> [UART, PM25] Reading data...
19:52:30:409 -> [UART, PM25] Data not available.
19:52:30:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:409 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:409 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:430 -> [UART, PM25] Reading data...
19:52:30:430 -> [UART, PM25] Data not available.
19:52:30:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:430 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:430 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:450 -> [UART, PM25] Reading data...
19:52:30:451 -> [UART, PM25] Data not available.
19:52:30:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:451 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:451 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:472 -> [UART, PM25] Reading data...
19:52:30:472 -> [UART, PM25] Data not available.
19:52:30:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:472 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:472 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:493 -> [UART, PM25] Reading data...
19:52:30:493 -> [UART, PM25] Data not available.
19:52:30:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:493 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:493 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:513 -> [UART, PM25] Reading data...
19:52:30:514 -> [UART, PM25] Data not available.
19:52:30:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:514 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:514 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:535 -> [UART, PM25] Reading data...
19:52:30:535 -> [UART, PM25] Data not available.
19:52:30:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:535 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:535 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:555 -> [UART, PM25] Reading data...
19:52:30:556 -> [UART, PM25] Data not available.
19:52:30:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:556 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:556 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:576 -> [UART, PM25] Reading data...
19:52:30:577 -> [UART, PM25] Data not available.
19:52:30:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:577 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:577 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:598 -> [UART, PM25] Reading data...
19:52:30:599 -> [UART, PM25] Data not available.
19:52:30:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:599 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:599 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:618 -> [UART, PM25] Reading data...
19:52:30:619 -> [UART, PM25] Data not available.
19:52:30:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:619 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:619 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:639 -> [UART, PM25] Reading data...
19:52:30:640 -> [UART, PM25] Data not available.
19:52:30:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:640 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:640 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:660 -> [UART, PM25] Reading data...
19:52:30:661 -> [UART, PM25] Data not available.
19:52:30:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:661 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:661 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:681 -> [UART, PM25] Reading data...
19:52:30:682 -> [UART, PM25] Data not available.
19:52:30:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:682 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:682 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:703 -> [UART, PM25] Reading data...
19:52:30:703 -> [UART, PM25] Data not available.
19:52:30:703 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:703 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:703 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:703 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:723 -> [UART, PM25] Reading data...
19:52:30:724 -> [UART, PM25] Data not available.
19:52:30:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:724 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:724 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:744 -> [UART, PM25] Reading data...
19:52:30:744 -> [UART, PM25] Data not available.
19:52:30:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:745 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:745 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:765 -> [UART, PM25] Reading data...
19:52:30:766 -> [UART, PM25] Data not available.
19:52:30:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:766 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:766 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:787 -> [UART, PM25] Reading data...
19:52:30:787 -> [UART, PM25] Data not available.
19:52:30:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:787 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:787 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:808 -> [UART, PM25] Reading data...
19:52:30:808 -> [UART, PM25] Data not available.
19:52:30:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:808 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:808 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:828 -> [UART, PM25] Reading data...
19:52:30:829 -> [UART, PM25] Data not available.
19:52:30:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:829 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:829 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:850 -> [UART, PM25] Reading data...
19:52:30:850 -> [UART, PM25] Data not available.
19:52:30:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:850 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:850 -> [UART, PM25] Uart available, resetting event queue..

19:52:30:871 -> [UART, PM25] Data not available.
19:52:30:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:871 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:871 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:891 -> [UART, PM25] Reading data...19:52:30:870 -> [UART, PM25] Reading data...
19:52:30:892 -> [UART, PM25] Data not available.
19:52:30:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:892 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:892 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:912 -> [UART, PM25] Reading data...
19:52:30:913 -> [UART, PM25] Data not available.
19:52:30:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:913 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:913 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:933 -> [UART, PM25] Reading data...
19:52:30:934 -> [UART, PM25] Data not available.
19:52:30:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:934 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:934 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:954 -> [UART, PM25] Reading data...
19:52:30:955 -> [UART, PM25] Data not available.
19:52:30:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:955 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:955 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:975 -> [UART, PM25] Reading data...
19:52:30:976 -> [UART, PM25] Data not available.
19:52:30:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:976 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:976 -> [UART, PM25] Uart available, resetting event queue..
19:52:30:996 -> [UART, PM25] Reading data...
19:52:30:997 -> [UART, PM25] Data not available.
19:52:30:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:30:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:30:997 -> [UART, PM25] Uart available, clearing write errors..
19:52:30:997 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:018 -> [UART, PM25] Reading data...
19:52:31:018 -> [UART, PM25] Data not available.
19:52:31:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:018 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:018 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:038 -> [UART, PM25] Reading data...
19:52:31:039 -> [UART, PM25] Data not available.
19:52:31:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:059 -> [UART, PM25] Reading data...
19:52:31:060 -> [UART, PM25] Data not available.
19:52:31:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:060 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:060 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:081 -> [UART, PM25] Reading data...
19:52:31:081 -> [UART, PM25] Data not available.
19:52:31:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:081 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:081 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:113 -> [UART, PM25] Reading data...
19:52:31:114 -> [UART, PM25] Data not available.
19:52:31:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:114 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:114 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:122 -> [UART, PM25] Reading data...
19:52:31:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:123 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:123 -> [UART, PM25] Uart available, resetting event queue..

19:52:31:123 -> [UART, PM25] Data not available.19:52:31:143 -> [UART, PM25] Reading data...
19:52:31:144 -> [UART, PM25] Data not available.
19:52:31:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:144 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:144 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:164 -> [UART, PM25] Reading data...
19:52:31:165 -> [UART, PM25] Data not available.
19:52:31:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:165 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:165 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:185 -> [UART, PM25] Reading data...
19:52:31:185 -> [UART, PM25] Data not available.
19:52:31:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:186 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:186 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:206 -> [UART, PM25] Reading data...
19:52:31:207 -> [UART, PM25] Data not available.
19:52:31:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:207 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:207 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:227 -> [UART, PM25] Reading data...
19:52:31:228 -> [UART, PM25] Data not available.
19:52:31:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:228 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:228 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:248 -> [UART, PM25] Reading data...
19:52:31:249 -> [UART, PM25] Data not available.
19:52:31:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:249 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:249 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:269 -> [UART, PM25] Reading data...
19:52:31:270 -> [UART, PM25] Data not available.
19:52:31:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:270 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:270 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:290 -> [UART, PM25] Reading data...
19:52:31:291 -> [UART, PM25] Data not available.
19:52:31:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:291 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:291 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:312 -> [UART, PM25] Reading data...
19:52:31:312 -> [UART, PM25] Data not available.
19:52:31:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:312 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:312 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:332 -> [UART, PM25] Reading data...
19:52:31:333 -> [UART, PM25] Data not available.
19:52:31:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:333 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:333 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:369 -> [UART, PM25] Reading data...
19:52:31:384 -> [UART, PM25] Data not available.
19:52:31:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:384 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:384 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:384 -> [UART, PM25] Reading data...
19:52:31:384 -> [UART, PM25] Data not available.
19:52:31:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:384 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:384 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:395 -> [UART, PM25] Reading data...
19:52:31:396 -> [UART, PM25] Data not available.
19:52:31:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:396 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:396 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:417 -> [UART, PM25] Reading data...
19:52:31:418 -> [UART, PM25] Data not available.
19:52:31:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:418 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:418 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:437 -> [UART, PM25] Reading data...
19:52:31:438 -> [UART, PM25] Data not available.
19:52:31:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:438 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:438 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:458 -> [UART, PM25] Reading data...
19:52:31:459 -> [UART, PM25] Data not available.
19:52:31:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:459 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:459 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:479 -> [UART, PM25] Reading data...
19:52:31:480 -> [UART, PM25] Data not available.
19:52:31:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:480 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:480 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:500 -> [UART, PM25] Reading data...
19:52:31:501 -> [UART, PM25] Data not available.
19:52:31:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:501 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:501 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:522 -> [UART, PM25] Reading data...
19:52:31:522 -> [UART, PM25] Data not available.
19:52:31:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:522 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:522 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:542 -> [UART, PM25] Reading data...
19:52:31:543 -> [UART, PM25] Data not available.
19:52:31:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:543 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:543 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:563 -> [UART, PM25] Reading data...
19:52:31:564 -> [UART, PM25] Data not available.
19:52:31:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:564 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:564 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:584 -> [UART, PM25] Reading data...
19:52:31:585 -> [UART, PM25] Data not available.
19:52:31:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:585 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:585 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:605 -> [UART, PM25] Reading data...
19:52:31:606 -> [UART, PM25] Data not available.
19:52:31:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:606 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:606 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:638 -> [UART, PM25] Reading data...
19:52:31:638 -> [UART, PM25] Data not available.
19:52:31:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:638 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:638 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:647 -> [UART, PM25] Reading data...
19:52:31:648 -> [UART, PM25] Data not available.
19:52:31:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:648 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:648 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:669 -> [UART, PM25] Reading data...
19:52:31:669 -> [UART, PM25] Data not available.
19:52:31:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:669 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:669 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:689 -> [UART, PM25] Reading data...
19:52:31:690 -> [UART, PM25] Data not available.
19:52:31:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:690 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:690 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:710 -> [UART, PM25] Reading data...
19:52:31:711 -> [UART, PM25] Data not available.
19:52:31:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:711 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:711 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:732 -> [UART, PM25] Reading data...
19:52:31:732 -> [UART, PM25] Data not available.
19:52:31:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:732 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:732 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:752 -> [UART, PM25] Reading data...
19:52:31:753 -> [UART, PM25] Data not available.
19:52:31:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:753 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:753 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:773 -> [UART, PM25] Reading data...
19:52:31:774 -> [UART, PM25] Data not available.
19:52:31:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:774 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:774 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:795 -> [UART, PM25] Reading data...
19:52:31:795 -> [UART, PM25] Data not available.
19:52:31:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:795 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:795 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:816 -> [UART, PM25] Reading data...
19:52:31:816 -> [UART, PM25] Data not available.
19:52:31:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:816 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:816 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:836 -> [UART, PM25] Reading data...
19:52:31:837 -> [UART, PM25] Data not available.
19:52:31:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:837 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:837 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:857 -> [UART, PM25] Reading data...
19:52:31:858 -> [UART, PM25] Data not available.
19:52:31:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:878 -> [UART, PM25] Reading data...
19:52:31:879 -> [UART, PM25] Data not available.
19:52:31:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:879 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:879 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:899 -> [UART, PM25] Reading data...
19:52:31:900 -> [UART, PM25] Data not available.
19:52:31:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:900 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:900 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:921 -> [UART, PM25] Reading data...
19:52:31:921 -> [UART, PM25] Data not available.
19:52:31:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:921 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:921 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:941 -> [UART, PM25] Reading data...
19:52:31:942 -> [UART, PM25] Data not available.
19:52:31:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:942 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:942 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:962 -> [UART, PM25] Reading data...
19:52:31:963 -> [UART, PM25] Data not available.
19:52:31:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:963 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:963 -> [UART, PM25] Uart available, resetting event queue..
19:52:31:983 -> [UART, PM25] Reading data...
19:52:31:984 -> [UART, PM25] Data not available.
19:52:31:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:31:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:31:984 -> [UART, PM25] Uart available, clearing write errors..
19:52:31:984 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:004 -> [UART, PM25] Reading data...
19:52:32:005 -> [UART, PM25] Data not available.
19:52:32:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:005 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:005 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:025 -> [UART, PM25] Reading data...
19:52:32:026 -> [UART, PM25] Data not available.
19:52:32:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:026 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:026 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:047 -> [UART, PM25] Reading data...
19:52:32:047 -> [UART, PM25] Data not available.
19:52:32:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:047 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:047 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:067 -> [UART, PM25] Reading data...
19:52:32:068 -> [UART, PM25] Data not available.
19:52:32:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:068 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:068 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:088 -> [UART, PM25] Reading data...
19:52:32:089 -> [UART, PM25] Data not available.
19:52:32:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:089 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:089 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:109 -> [UART, PM25] Reading data...
19:52:32:110 -> [UART, PM25] Data not available.
19:52:32:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:110 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:110 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:131 -> [UART, PM25] Reading data...
19:52:32:131 -> [UART, PM25] Data not available.
19:52:32:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:131 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:131 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:161 -> [UART, PM25] Reading data...
19:52:32:162 -> [UART, PM25] Data not available.
19:52:32:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:162 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:162 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:172 -> [UART, PM25] Reading data...
19:52:32:173 -> [UART, PM25] Data not available.
19:52:32:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:173 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:173 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:193 -> [UART, PM25] Reading data...
19:52:32:194 -> [UART, PM25] Data not available.
19:52:32:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:194 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:194 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:214 -> [UART, PM25] Reading data...
19:52:32:215 -> [UART, PM25] Data not available.
19:52:32:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:215 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:215 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:236 -> [UART, PM25] Reading data...
19:52:32:236 -> [UART, PM25] Data not available.
19:52:32:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:236 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:236 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:256 -> [UART, PM25] Reading data...
19:52:32:257 -> [UART, PM25] Data not available.
19:52:32:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:257 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:257 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:277 -> [UART, PM25] Reading data...
19:52:32:278 -> [UART, PM25] Data not available.
19:52:32:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:278 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:278 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:298 -> [UART, PM25] Reading data...
19:52:32:299 -> [UART, PM25] Data not available.
19:52:32:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:299 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:299 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:319 -> [UART, PM25] Reading data...
19:52:32:320 -> [UART, PM25] Data not available.
19:52:32:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:320 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:320 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:341 -> [UART, PM25] Reading data...
19:52:32:341 -> [UART, PM25] Data not available.
19:52:32:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:341 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:341 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:361 -> [UART, PM25] Reading data...
19:52:32:362 -> [UART, PM25] Data not available.
19:52:32:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:362 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:362 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:382 -> [UART, PM25] Reading data...
19:52:32:383 -> [UART, PM25] Data not available.
19:52:32:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:383 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:383 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:403 -> [UART, PM25] Reading data...
19:52:32:404 -> [UART, PM25] Data not available.
19:52:32:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:404 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:404 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:424 -> [UART, PM25] Reading data...
19:52:32:425 -> [UART, PM25] Data not available.
19:52:32:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:425 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:425 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:446 -> [UART, PM25] Reading data...
19:52:32:446 -> [UART, PM25] Data not available.
19:52:32:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:446 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:446 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:466 -> [UART, PM25] Reading data...
19:52:32:467 -> [UART, PM25] Data not available.
19:52:32:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:467 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:467 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:487 -> [UART, PM25] Reading data...
19:52:32:488 -> [UART, PM25] Data not available.
19:52:32:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:488 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:488 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:508 -> [UART, PM25] Reading data...
19:52:32:509 -> [UART, PM25] Data not available.
19:52:32:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:509 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:509 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:529 -> [UART, PM25] Reading data...
19:52:32:530 -> [UART, PM25] Data not available.
19:52:32:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:530 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:530 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:550 -> [UART, PM25] Reading data...
19:52:32:551 -> [UART, PM25] Data not available.
19:52:32:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:551 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:551 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:571 -> [UART, PM25] Reading data...
19:52:32:572 -> [UART, PM25] Data not available.
19:52:32:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:572 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:572 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:592 -> [UART, PM25] Reading data...
19:52:32:593 -> [UART, PM25] Data not available.
19:52:32:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:593 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:593 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:613 -> [UART, PM25] Reading data...
19:52:32:614 -> [UART, PM25] Data not available.
19:52:32:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:614 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:614 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:634 -> [UART, PM25] Reading data...
19:52:32:635 -> [UART, PM25] Data not available.
19:52:32:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:635 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:635 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:655 -> [UART, PM25] Reading data...
19:52:32:656 -> [UART, PM25] Data not available.
19:52:32:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:656 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:656 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:676 -> [UART, PM25] Reading data...
19:52:32:677 -> [UART, PM25] Data not available.
19:52:32:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:677 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:677 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:697 -> [UART, PM25] Reading data...
19:52:32:698 -> [UART, PM25] Data not available.
19:52:32:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:698 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:698 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:718 -> [UART, PM25] Reading data...
19:52:32:719 -> [UART, PM25] Data not available.
19:52:32:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:719 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:719 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:740 -> [UART, PM25] Reading data...
19:52:32:740 -> [UART, PM25] Data not available.
19:52:32:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:740 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:740 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:761 -> [UART, PM25] Reading data...
19:52:32:762 -> [UART, PM25] Data not available.
19:52:32:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:781 -> [UART, PM25] Reading data...
19:52:32:782 -> [UART, PM25] Data not available.
19:52:32:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:782 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:782 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:802 -> [UART, PM25] Reading data...
19:52:32:803 -> [UART, PM25] Data not available.
19:52:32:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:803 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:803 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:823 -> [UART, PM25] Reading data...
19:52:32:824 -> [UART, PM25] Data not available.
19:52:32:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:824 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:824 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:844 -> [UART, PM25] Reading data...
19:52:32:845 -> [UART, PM25] Data not available.
19:52:32:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:845 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:845 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:865 -> [UART, PM25] Reading data...
19:52:32:866 -> [UART, PM25] Data not available.
19:52:32:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:866 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:866 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:886 -> [UART, PM25] Reading data...
19:52:32:887 -> [UART, PM25] Data not available.
19:52:32:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:887 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:887 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:907 -> [UART, PM25] Reading data...
19:52:32:908 -> [UART, PM25] Data not available.
19:52:32:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:908 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:908 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:928 -> [UART, PM25] Reading data...
19:52:32:929 -> [UART, PM25] Data not available.
19:52:32:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:929 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:929 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:949 -> [UART, PM25] Reading data...
19:52:32:950 -> [UART, PM25] Data not available.
19:52:32:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:950 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:950 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:970 -> [UART, PM25] Reading data...
19:52:32:971 -> [UART, PM25] Data not available.
19:52:32:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:971 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:971 -> [UART, PM25] Uart available, resetting event queue..
19:52:32:991 -> [UART, PM25] Reading data...
19:52:32:992 -> [UART, PM25] Data not available.
19:52:32:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:32:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:32:992 -> [UART, PM25] Uart available, clearing write errors..
19:52:32:992 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:012 -> [UART, PM25] Reading data...
19:52:33:013 -> [UART, PM25] Data not available.
19:52:33:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:013 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:013 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:038 -> [UART, PM25] Reading data...
19:52:33:066 -> [UART, PM25] Data not available.
19:52:33:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:066 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:066 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:066 -> [UART, PM25] Reading data...
19:52:33:066 -> [UART, PM25] Data not available.
19:52:33:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:067 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:067 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:075 -> [UART, PM25] Reading data...
19:52:33:076 -> [UART, PM25] Data not available.
19:52:33:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:076 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:076 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:097 -> [UART, PM25] Reading data...
19:52:33:097 -> [UART, PM25] Data not available.
19:52:33:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:097 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:097 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:117 -> [UART, PM25] Reading data...
19:52:33:118 -> [UART, PM25] Data not available.
19:52:33:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:118 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:118 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:138 -> [UART, PM25] Reading data...
19:52:33:139 -> [UART, PM25] Data not available.
19:52:33:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:139 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:139 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:159 -> [UART, PM25] Reading data...
19:52:33:160 -> [UART, PM25] Data not available.
19:52:33:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:160 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:160 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:191 -> [UART, PM25] Reading data...
19:52:33:192 -> [UART, PM25] Data not available.
19:52:33:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:192 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:192 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:201 -> [UART, PM25] Reading data...
19:52:33:201 -> [UART, PM25] Data not available.
19:52:33:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:202 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:202 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:222 -> [UART, PM25] Reading data...
19:52:33:223 -> [UART, PM25] Data not available.
19:52:33:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:223 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:223 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:243 -> [UART, PM25] Reading data...
19:52:33:244 -> [UART, PM25] Data not available.
19:52:33:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:244 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:244 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:264 -> [UART, PM25] Reading data...
19:52:33:265 -> [UART, PM25] Data not available.
19:52:33:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:265 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:265 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:285 -> [UART, PM25] Reading data...
19:52:33:286 -> [UART, PM25] Data not available.
19:52:33:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:286 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:286 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:306 -> [UART, PM25] Reading data...
19:52:33:307 -> [UART, PM25] Data not available.
19:52:33:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:307 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:307 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:327 -> [UART, PM25] Reading data...
19:52:33:328 -> [UART, PM25] Data not available.
19:52:33:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:328 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:328 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:348 -> [UART, PM25] Reading data...
19:52:33:349 -> [UART, PM25] Data not available.
19:52:33:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:349 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:349 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:369 -> [UART, PM25] Reading data...
19:52:33:370 -> [UART, PM25] Data not available.
19:52:33:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:370 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:370 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:390 -> [UART, PM25] Reading data...
19:52:33:391 -> [UART, PM25] Data not available.
19:52:33:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:391 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:391 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:411 -> [UART, PM25] Reading data...
19:52:33:412 -> [UART, PM25] Data not available.
19:52:33:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:412 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:412 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:433 -> [UART, PM25] Reading data...
19:52:33:433 -> [UART, PM25] Data not available.
19:52:33:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:433 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:433 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:453 -> [UART, PM25] Reading data...
19:52:33:454 -> [UART, PM25] Data not available.
19:52:33:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:454 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:454 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:475 -> [UART, PM25] Reading data...
19:52:33:475 -> [UART, PM25] Data not available.
19:52:33:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:475 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:475 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:495 -> [UART, PM25] Reading data...
19:52:33:496 -> [UART, PM25] Data not available.
19:52:33:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:496 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:496 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:517 -> [UART, PM25] Reading data...
19:52:33:520 -> [UART, PM25] Data not available.
19:52:33:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:520 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:520 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:537 -> [UART, PM25] Reading data...
19:52:33:538 -> [UART, PM25] Data not available.
19:52:33:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:538 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:538 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:558 -> [UART, PM25] Reading data...
19:52:33:559 -> [UART, PM25] Data not available.
19:52:33:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:559 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:559 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:579 -> [UART, PM25] Reading data...
19:52:33:580 -> [UART, PM25] Data not available.
19:52:33:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:580 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:580 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:600 -> [UART, PM25] Reading data...
19:52:33:601 -> [UART, PM25] Data not available.
19:52:33:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:601 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:601 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:621 -> [UART, PM25] Reading data...
19:52:33:622 -> [UART, PM25] Data not available.
19:52:33:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:622 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:622 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:642 -> [UART, PM25] Reading data...
19:52:33:642 -> [UART, PM25] Data not available.
19:52:33:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:643 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:643 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:667 -> [UART, PM25] Reading data...
19:52:33:667 -> [UART, PM25] Data not available.
19:52:33:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:667 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:667 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:684 -> [UART, PM25] Reading data...
19:52:33:685 -> [UART, PM25] Data not available.
19:52:33:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:685 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:685 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:716 -> [UART, PM25] Reading data...
19:52:33:716 -> [UART, PM25] Data not available.
19:52:33:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:716 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:716 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:726 -> [UART, PM25] Reading data...
19:52:33:727 -> [UART, PM25] Data not available.
19:52:33:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:727 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:727 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:747 -> [UART, PM25] Reading data...
19:52:33:748 -> [UART, PM25] Data not available.
19:52:33:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:748 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:748 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:769 -> [UART, PM25] Reading data...
19:52:33:769 -> [UART, PM25] Data not available.
19:52:33:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:769 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:769 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:789 -> [UART, PM25] Reading data...
19:52:33:789 -> [UART, PM25] Data not available.
19:52:33:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:790 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:790 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:810 -> [UART, PM25] Reading data...
19:52:33:811 -> [UART, PM25] Data not available.
19:52:33:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:811 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:811 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:831 -> [UART, PM25] Reading data...
19:52:33:832 -> [UART, PM25] Data not available.
19:52:33:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:832 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:832 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:853 -> [UART, PM25] Reading data...
19:52:33:853 -> [UART, PM25] Data not available.
19:52:33:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:853 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:853 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:874 -> [UART, PM25] Reading data...
19:52:33:874 -> [UART, PM25] Data not available.
19:52:33:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:874 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:874 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:894 -> [UART, PM25] Reading data...
19:52:33:895 -> [UART, PM25] Data not available.
19:52:33:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:895 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:895 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:916 -> [UART, PM25] Reading data...
19:52:33:916 -> [UART, PM25] Data not available.
19:52:33:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:916 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:916 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:936 -> [UART, PM25] Reading data...
19:52:33:937 -> [UART, PM25] Data not available.
19:52:33:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:937 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:937 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:957 -> [UART, PM25] Reading data...
19:52:33:958 -> [UART, PM25] Data not available.
19:52:33:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:958 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:958 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:979 -> [UART, PM25] Reading data...
19:52:33:979 -> [UART, PM25] Data not available.
19:52:33:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:33:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:33:979 -> [UART, PM25] Uart available, clearing write errors..
19:52:33:979 -> [UART, PM25] Uart available, resetting event queue..
19:52:33:999 -> [UART, PM25] Reading data...
19:52:34:000 -> [UART, PM25] Data not available.
19:52:34:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:000 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:000 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:020 -> [UART, PM25] Reading data...
19:52:34:021 -> [UART, PM25] Data not available.
19:52:34:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:021 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:021 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:041 -> [UART, PM25] Reading data...
19:52:34:042 -> [UART, PM25] Data not available.
19:52:34:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:042 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:042 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:062 -> [UART, PM25] Reading data...
19:52:34:063 -> [UART, PM25] Data not available.
19:52:34:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:063 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:063 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:084 -> [UART, PM25] Reading data...
19:52:34:084 -> [UART, PM25] Data not available.
19:52:34:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:084 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:084 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:104 -> [UART, PM25] Reading data...
19:52:34:105 -> [UART, PM25] Data not available.
19:52:34:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:105 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:105 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:125 -> [UART, PM25] Reading data...
19:52:34:126 -> [UART, PM25] Data not available.
19:52:34:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:126 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:126 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:146 -> [UART, PM25] Reading data...
19:52:34:147 -> [UART, PM25] Data not available.
19:52:34:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:147 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:147 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:167 -> [UART, PM25] Reading data...
19:52:34:168 -> [UART, PM25] Data not available.
19:52:34:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:168 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:168 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:188 -> [UART, PM25] Reading data...
19:52:34:189 -> [UART, PM25] Data not available.
19:52:34:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:189 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:189 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:209 -> [UART, PM25] Reading data...
19:52:34:210 -> [UART, PM25] Data not available.
19:52:34:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:210 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:210 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:232 -> [UART, PM25] Reading data...
19:52:34:233 -> [UART, PM25] Data not available.
19:52:34:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:233 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:233 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:251 -> [UART, PM25] Reading data...
19:52:34:252 -> [UART, PM25] Data not available.
19:52:34:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:252 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:252 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:273 -> [UART, PM25] Reading data...
19:52:34:273 -> [UART, PM25] Data not available.
19:52:34:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:273 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:273 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:293 -> [UART, PM25] Reading data...
19:52:34:294 -> [UART, PM25] Data not available.
19:52:34:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:294 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:294 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:314 -> [UART, PM25] Reading data...
19:52:34:315 -> [UART, PM25] Data not available.
19:52:34:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:315 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:315 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:336 -> [UART, PM25] Reading data...
19:52:34:336 -> [UART, PM25] Data not available.
19:52:34:336 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:336 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:336 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:336 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:356 -> [UART, PM25] Reading data...
19:52:34:357 -> [UART, PM25] Data not available.
19:52:34:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:357 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:357 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:377 -> [UART, PM25] Reading data...
19:52:34:378 -> [UART, PM25] Data not available.
19:52:34:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:378 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:378 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:398 -> [UART, PM25] Reading data...
19:52:34:399 -> [UART, PM25] Data not available.
19:52:34:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:399 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:399 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:421 -> [UART, PM25] Reading data...
19:52:34:421 -> [UART, PM25] Data not available.
19:52:34:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:421 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:421 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:440 -> [UART, PM25] Reading data...
19:52:34:441 -> [UART, PM25] Data not available.
19:52:34:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:441 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:441 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:462 -> [UART, PM25] Reading data...
19:52:34:462 -> [UART, PM25] Data not available.
19:52:34:462 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:462 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:462 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:462 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:482 -> [UART, PM25] Reading data...
19:52:34:483 -> [UART, PM25] Data not available.
19:52:34:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:483 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:483 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:503 -> [UART, PM25] Reading data...
19:52:34:504 -> [UART, PM25] Data not available.
19:52:34:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:504 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:504 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:504 -> PING!
19:52:34:717 -> [UART, PM25] Reading data...
19:52:34:718 -> [UART, PM25] Data not available.
19:52:34:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:718 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:718 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:750 -> [UART, PM25] Reading data...
19:52:34:755 -> [UART, PM25] Data not available.
19:52:34:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:755 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:755 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:760 -> [UART, PM25] Reading data...
19:52:34:760 -> [UART, PM25] Data not available.
19:52:34:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:760 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:760 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:781 -> [UART, PM25] Reading data...
19:52:34:781 -> [UART, PM25] Data not available.
19:52:34:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:781 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:781 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:801 -> [UART, PM25] Reading data...
19:52:34:802 -> [UART, PM25] Data not available.
19:52:34:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:802 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:802 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:822 -> [UART, PM25] Reading data...
19:52:34:823 -> [UART, PM25] Data not available.
19:52:34:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:823 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:823 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:843 -> [UART, PM25] Reading data...
19:52:34:844 -> [UART, PM25] Data not available.
19:52:34:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:844 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:844 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:865 -> [UART, PM25] Reading data...
19:52:34:865 -> [UART, PM25] Data not available.
19:52:34:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:865 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:865 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:886 -> [UART, PM25] Reading data...
19:52:34:886 -> [UART, PM25] Data not available.
19:52:34:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:886 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:886 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:907 -> [UART, PM25] Reading data...
19:52:34:907 -> [UART, PM25] Data not available.
19:52:34:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:907 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:907 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:927 -> [UART, PM25] Reading data...
19:52:34:928 -> [UART, PM25] Data not available.
19:52:34:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:928 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:928 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:951 -> [UART, PM25] Reading data...
19:52:34:952 -> [UART, PM25] Data not available.
19:52:34:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:952 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:952 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:970 -> [UART, PM25] Reading data...
19:52:34:970 -> [UART, PM25] Data not available.
19:52:34:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:970 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:970 -> [UART, PM25] Uart available, resetting event queue..
19:52:34:990 -> [UART, PM25] Reading data...
19:52:34:990 -> [UART, PM25] Data not available.
19:52:34:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:34:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:34:991 -> [UART, PM25] Uart available, clearing write errors..
19:52:34:991 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:048 -> [UART, PM25] Reading data...
19:52:35:052 -> [UART, PM25] Data not available.
19:52:35:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:052 -> [UART, PM25] Reading data...
19:52:35:052 -> [UART, PM25] Data not available.
19:52:35:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:056 -> [UART, PM25] Reading data...
19:52:35:056 -> [UART, PM25] Data not available.
19:52:35:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:056 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:056 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:074 -> [UART, PM25] Reading data...
19:52:35:075 -> [UART, PM25] Data not available.
19:52:35:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:075 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:075 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:095 -> [UART, PM25] Reading data...
19:52:35:096 -> [UART, PM25] Data not available.
19:52:35:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:096 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:096 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:116 -> [UART, PM25] Reading data...
19:52:35:117 -> [UART, PM25] Data not available.
19:52:35:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:117 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:117 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:137 -> [UART, PM25] Reading data...
19:52:35:138 -> [UART, PM25] Data not available.
19:52:35:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:138 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:138 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:158 -> [UART, PM25] Reading data...
19:52:35:159 -> [UART, PM25] Data not available.
19:52:35:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:159 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:159 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:179 -> [UART, PM25] Reading data...
19:52:35:180 -> [UART, PM25] Data not available.
19:52:35:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:180 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:180 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:200 -> [UART, PM25] Reading data...
19:52:35:201 -> [UART, PM25] Data not available.
19:52:35:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:201 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:201 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:221 -> [UART, PM25] Reading data...
19:52:35:222 -> [UART, PM25] Data not available.
19:52:35:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:222 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:222 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:242 -> [UART, PM25] Reading data...
19:52:35:243 -> [UART, PM25] Data not available.
19:52:35:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:243 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:243 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:263 -> [UART, PM25] Reading data...
19:52:35:264 -> [UART, PM25] Data not available.
19:52:35:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:264 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:264 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:285 -> [UART, PM25] Reading data...
19:52:35:285 -> [UART, PM25] Data not available.
19:52:35:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:285 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:285 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:305 -> [UART, PM25] Reading data...
19:52:35:306 -> [UART, PM25] Data not available.
19:52:35:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:306 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:306 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:326 -> [UART, PM25] Reading data...
19:52:35:327 -> [UART, PM25] Data not available.
19:52:35:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:327 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:327 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:347 -> [UART, PM25] Reading data...
19:52:35:348 -> [UART, PM25] Data not available.
19:52:35:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:348 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:348 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:368 -> [UART, PM25] Reading data...
19:52:35:369 -> [UART, PM25] Data not available.
19:52:35:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:369 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:369 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:389 -> [UART, PM25] Reading data...
19:52:35:390 -> [UART, PM25] Data not available.
19:52:35:390 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:390 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:390 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:390 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:410 -> [UART, PM25] Reading data...
19:52:35:411 -> [UART, PM25] Data not available.
19:52:35:411 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:411 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:411 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:411 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:431 -> [UART, PM25] Reading data...
19:52:35:432 -> [UART, PM25] Data not available.
19:52:35:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:432 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:432 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:453 -> [UART, PM25] Reading data...
19:52:35:453 -> [UART, PM25] Data not available.
19:52:35:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:453 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:453 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:473 -> [UART, PM25] Reading data...
19:52:35:474 -> [UART, PM25] Data not available.
19:52:35:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:474 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:474 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:494 -> [UART, PM25] Reading data...
19:52:35:495 -> [UART, PM25] Data not available.
19:52:35:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:495 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:495 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:516 -> [UART, PM25] Reading data...
19:52:35:516 -> [UART, PM25] Data not available.
19:52:35:516 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:516 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:516 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:516 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:536 -> [UART, PM25] Reading data...
19:52:35:537 -> [UART, PM25] Data not available.
19:52:35:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:537 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:537 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:557 -> [UART, PM25] Reading data...
19:52:35:558 -> [UART, PM25] Data not available.
19:52:35:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:558 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:558 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:578 -> [UART, PM25] Reading data...
19:52:35:579 -> [UART, PM25] Data not available.
19:52:35:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:579 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:579 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:599 -> [UART, PM25] Reading data...
19:52:35:600 -> [UART, PM25] Data not available.
19:52:35:600 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:600 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:600 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:600 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:621 -> [UART, PM25] Reading data...
19:52:35:621 -> [UART, PM25] Data not available.
19:52:35:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:621 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:621 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:641 -> [UART, PM25] Reading data...
19:52:35:642 -> [UART, PM25] Data not available.
19:52:35:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:642 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:642 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:662 -> [UART, PM25] Reading data...
19:52:35:663 -> [UART, PM25] Data not available.
19:52:35:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:663 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:663 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:683 -> [UART, PM25] Reading data...
19:52:35:684 -> [UART, PM25] Data not available.
19:52:35:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:684 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:684 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:704 -> [UART, PM25] Reading data...
19:52:35:705 -> [UART, PM25] Data not available.
19:52:35:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:705 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:705 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:725 -> [UART, PM25] Reading data...
19:52:35:726 -> [UART, PM25] Data not available.
19:52:35:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:726 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:726 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:746 -> [UART, PM25] Reading data...
19:52:35:747 -> [UART, PM25] Data not available.
19:52:35:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:747 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:747 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:778 -> [UART, PM25] Reading data...
19:52:35:779 -> [UART, PM25] Data not available.
19:52:35:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:779 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:779 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:788 -> [UART, PM25] Reading data...
19:52:35:789 -> [UART, PM25] Data not available.
19:52:35:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:789 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:789 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:809 -> [UART, PM25] Reading data...
19:52:35:810 -> [UART, PM25] Data not available.
19:52:35:810 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:810 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:810 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:810 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:830 -> [UART, PM25] Reading data...
19:52:35:831 -> [UART, PM25] Data not available.
19:52:35:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:831 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:831 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:851 -> [UART, PM25] Reading data...
19:52:35:852 -> [UART, PM25] Data not available.
19:52:35:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:852 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:852 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:872 -> [UART, PM25] Reading data...
19:52:35:873 -> [UART, PM25] Data not available.
19:52:35:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:873 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:873 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:893 -> [UART, PM25] Reading data...
19:52:35:894 -> [UART, PM25] Data not available.
19:52:35:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:894 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:894 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:914 -> [UART, PM25] Reading data...
19:52:35:915 -> [UART, PM25] Data not available.
19:52:35:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:915 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:915 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:937 -> [UART, PM25] Reading data...
19:52:35:937 -> [UART, PM25] Data not available.
19:52:35:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:937 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:937 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:956 -> [UART, PM25] Reading data...
19:52:35:957 -> [UART, PM25] Data not available.
19:52:35:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:957 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:957 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:977 -> [UART, PM25] Reading data...
19:52:35:978 -> [UART, PM25] Data not available.
19:52:35:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:978 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:978 -> [UART, PM25] Uart available, resetting event queue..
19:52:35:998 -> [UART, PM25] Reading data...
19:52:35:998 -> [UART, PM25] Data not available.
19:52:35:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:35:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:35:999 -> [UART, PM25] Uart available, clearing write errors..
19:52:35:999 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:019 -> [UART, PM25] Reading data...
19:52:36:020 -> [UART, PM25] Data not available.
19:52:36:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:020 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:020 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:040 -> [UART, PM25] Reading data...
19:52:36:041 -> [UART, PM25] Data not available.
19:52:36:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:041 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:041 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:061 -> [UART, PM25] Reading data...
19:52:36:062 -> [UART, PM25] Data not available.
19:52:36:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:062 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:062 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:085 -> [UART, PM25] Reading data...
19:52:36:086 -> [UART, PM25] Data not available.
19:52:36:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:086 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:086 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:103 -> [UART, PM25] Reading data...
19:52:36:104 -> [UART, PM25] Data not available.
19:52:36:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:104 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:104 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:124 -> [UART, PM25] Reading data...
19:52:36:124 -> [UART, PM25] Data not available.
19:52:36:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:125 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:125 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:145 -> [UART, PM25] Reading data...
19:52:36:146 -> [UART, PM25] Data not available.
19:52:36:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:146 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:146 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:166 -> [UART, PM25] Reading data...
19:52:36:167 -> [UART, PM25] Data not available.
19:52:36:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:167 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:167 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:187 -> [UART, PM25] Reading data...
19:52:36:188 -> [UART, PM25] Data not available.
19:52:36:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:188 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:188 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:208 -> [UART, PM25] Reading data...
19:52:36:209 -> [UART, PM25] Data not available.
19:52:36:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:209 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:209 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:229 -> [UART, PM25] Reading data...
19:52:36:230 -> [UART, PM25] Data not available.
19:52:36:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:230 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:230 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:250 -> [UART, PM25] Reading data...
19:52:36:251 -> [UART, PM25] Data not available.
19:52:36:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:251 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:251 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:271 -> [UART, PM25] Reading data...
19:52:36:272 -> [UART, PM25] Data not available.
19:52:36:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:272 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:272 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:304 -> [UART, PM25] Reading data...
19:52:36:304 -> [UART, PM25] Data not available.
19:52:36:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:304 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:304 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:313 -> [UART, PM25] Reading data...
19:52:36:314 -> [UART, PM25] Data not available.
19:52:36:314 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:314 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:314 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:314 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:334 -> [UART, PM25] Reading data...
19:52:36:335 -> [UART, PM25] Data not available.
19:52:36:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:335 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:335 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:355 -> [UART, PM25] Reading data...
19:52:36:356 -> [UART, PM25] Data not available.
19:52:36:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:356 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:356 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:376 -> [UART, PM25] Reading data...
19:52:36:377 -> [UART, PM25] Data not available.
19:52:36:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:377 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:377 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:397 -> [UART, PM25] Reading data...
19:52:36:398 -> [UART, PM25] Data not available.
19:52:36:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:398 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:398 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:418 -> [UART, PM25] Reading data...
19:52:36:420 -> [UART, PM25] Data not available.
19:52:36:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:420 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:420 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:439 -> [UART, PM25] Reading data...
19:52:36:440 -> [UART, PM25] Data not available.
19:52:36:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:440 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:440 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:460 -> [UART, PM25] Reading data...
19:52:36:461 -> [UART, PM25] Data not available.
19:52:36:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:461 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:461 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:481 -> [UART, PM25] Reading data...
19:52:36:482 -> [UART, PM25] Data not available.
19:52:36:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:482 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:482 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:502 -> [UART, PM25] Reading data...
19:52:36:503 -> [UART, PM25] Data not available.
19:52:36:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:503 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:503 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:523 -> [UART, PM25] Reading data...
19:52:36:524 -> [UART, PM25] Data not available.
19:52:36:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:524 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:524 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:545 -> [UART, PM25] Reading data...
19:52:36:545 -> [UART, PM25] Data not available.
19:52:36:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:545 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:545 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:565 -> [UART, PM25] Reading data...
19:52:36:566 -> [UART, PM25] Data not available.
19:52:36:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:566 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:566 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:586 -> [UART, PM25] Reading data...
19:52:36:587 -> [UART, PM25] Data not available.
19:52:36:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:587 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:587 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:607 -> [UART, PM25] Reading data...
19:52:36:608 -> [UART, PM25] Data not available.
19:52:36:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:608 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:608 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:628 -> [UART, PM25] Reading data...
19:52:36:629 -> [UART, PM25] Data not available.
19:52:36:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:629 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:629 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:650 -> [UART, PM25] Reading data...
19:52:36:650 -> [UART, PM25] Data not available.
19:52:36:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:650 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:650 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:670 -> [UART, PM25] Reading data...
19:52:36:671 -> [UART, PM25] Data not available.
19:52:36:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:671 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:671 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:691 -> [UART, PM25] Reading data...
19:52:36:693 -> [UART, PM25] Data not available.
19:52:36:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:693 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:693 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:712 -> [UART, PM25] Reading data...
19:52:36:713 -> [UART, PM25] Data not available.
19:52:36:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:713 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:713 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:733 -> [UART, PM25] Reading data...
19:52:36:734 -> [UART, PM25] Data not available.
19:52:36:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:734 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:734 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:755 -> [UART, PM25] Reading data...
19:52:36:755 -> [UART, PM25] Data not available.
19:52:36:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:755 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:755 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:775 -> [UART, PM25] Reading data...
19:52:36:776 -> [UART, PM25] Data not available.
19:52:36:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:776 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:776 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:832 -> [UART, PM25] Reading data...
19:52:36:835 -> [UART, PM25] Data not available.
19:52:36:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:835 -> [UART, PM25] Reading data...
19:52:36:835 -> [UART, PM25] Data not available.
19:52:36:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:839 -> [UART, PM25] Reading data...
19:52:36:839 -> [UART, PM25] Data not available.
19:52:36:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:839 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:839 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:859 -> [UART, PM25] Reading data...
19:52:36:860 -> [UART, PM25] Data not available.
19:52:36:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:860 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:860 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:880 -> [UART, PM25] Reading data...
19:52:36:881 -> [UART, PM25] Data not available.
19:52:36:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:881 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:881 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:901 -> [UART, PM25] Reading data...
19:52:36:902 -> [UART, PM25] Data not available.
19:52:36:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:902 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:902 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:922 -> [UART, PM25] Reading data...
19:52:36:923 -> [UART, PM25] Data not available.
19:52:36:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:923 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:923 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:944 -> [UART, PM25] Reading data...
19:52:36:944 -> [UART, PM25] Data not available.
19:52:36:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:944 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:944 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:964 -> [UART, PM25] Reading data...
19:52:36:965 -> [UART, PM25] Data not available.
19:52:36:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:965 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:965 -> [UART, PM25] Uart available, resetting event queue..
19:52:36:985 -> [UART, PM25] Reading data...
19:52:36:986 -> [UART, PM25] Data not available.
19:52:36:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:36:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:36:986 -> [UART, PM25] Uart available, clearing write errors..
19:52:36:986 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:006 -> [UART, PM25] Reading data...
19:52:37:007 -> [UART, PM25] Data not available.
19:52:37:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:007 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:007 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:027 -> [UART, PM25] Reading data...
19:52:37:028 -> [UART, PM25] Data not available.
19:52:37:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:028 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:028 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:048 -> [UART, PM25] Reading data...
19:52:37:049 -> [UART, PM25] Data not available.
19:52:37:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:049 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:049 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:069 -> [UART, PM25] Reading data...
19:52:37:070 -> [UART, PM25] Data not available.
19:52:37:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:070 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:070 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:090 -> [UART, PM25] Reading data...
19:52:37:091 -> [UART, PM25] Data not available.
19:52:37:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:091 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:091 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:111 -> [UART, PM25] Reading data...
19:52:37:112 -> [UART, PM25] Data not available.
19:52:37:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:112 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:112 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:134 -> [UART, PM25] Reading data...
19:52:37:135 -> [UART, PM25] Data not available.
19:52:37:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:135 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:135 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:154 -> [UART, PM25] Reading data...
19:52:37:154 -> [UART, PM25] Data not available.
19:52:37:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:154 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:154 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:174 -> [UART, PM25] Reading data...
19:52:37:175 -> [UART, PM25] Data not available.
19:52:37:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:175 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:175 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:195 -> [UART, PM25] Reading data...
19:52:37:196 -> [UART, PM25] Data not available.
19:52:37:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:196 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:196 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:216 -> [UART, PM25] Reading data...
19:52:37:217 -> [UART, PM25] Data not available.
19:52:37:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:217 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:217 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:237 -> [UART, PM25] Reading data...
19:52:37:238 -> [UART, PM25] Data not available.
19:52:37:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:238 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:238 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:258 -> [UART, PM25] Reading data...
19:52:37:259 -> [UART, PM25] Data not available.
19:52:37:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:259 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:259 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:280 -> [UART, PM25] Reading data...
19:52:37:280 -> [UART, PM25] Data not available.
19:52:37:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:280 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:280 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:303 -> [UART, PM25] Reading data...
19:52:37:304 -> [UART, PM25] Data not available.
19:52:37:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:304 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:304 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:321 -> [UART, PM25] Reading data...
19:52:37:322 -> [UART, PM25] Data not available.
19:52:37:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:322 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:322 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:358 -> [UART, PM25] Reading data...
19:52:37:359 -> [UART, PM25] Data not available.
19:52:37:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:359 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:359 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:364 -> [UART, PM25] Reading data...
19:52:37:364 -> [UART, PM25] Data not available.
19:52:37:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:364 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:364 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:384 -> [UART, PM25] Reading data...
19:52:37:385 -> [UART, PM25] Data not available.
19:52:37:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:385 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:385 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:405 -> [UART, PM25] Reading data...
19:52:37:406 -> [UART, PM25] Data not available.
19:52:37:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:406 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:406 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:426 -> [UART, PM25] Reading data...
19:52:37:427 -> [UART, PM25] Data not available.
19:52:37:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:427 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:427 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:447 -> [UART, PM25] Reading data...
19:52:37:448 -> [UART, PM25] Data not available.
19:52:37:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:448 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:448 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:468 -> [UART, PM25] Reading data...
19:52:37:469 -> [UART, PM25] Data not available.
19:52:37:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:469 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:469 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:489 -> [UART, PM25] Reading data...
19:52:37:490 -> [UART, PM25] Data not available.
19:52:37:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:490 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:490 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:510 -> [UART, PM25] Reading data...
19:52:37:511 -> [UART, PM25] Data not available.
19:52:37:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:511 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:511 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:531 -> [UART, PM25] Reading data...
19:52:37:532 -> [UART, PM25] Data not available.
19:52:37:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:532 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:532 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:552 -> [UART, PM25] Reading data...
19:52:37:553 -> [UART, PM25] Data not available.
19:52:37:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:553 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:553 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:573 -> [UART, PM25] Reading data...
19:52:37:574 -> [UART, PM25] Data not available.
19:52:37:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:574 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:574 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:595 -> [UART, PM25] Reading data...
19:52:37:595 -> [UART, PM25] Data not available.
19:52:37:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:595 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:595 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:615 -> [UART, PM25] Reading data...
19:52:37:616 -> [UART, PM25] Data not available.
19:52:37:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:616 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:616 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:636 -> [UART, PM25] Reading data...
19:52:37:637 -> [UART, PM25] Data not available.
19:52:37:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:637 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:637 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:658 -> [UART, PM25] Reading data...
19:52:37:658 -> [UART, PM25] Data not available.
19:52:37:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:658 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:658 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:678 -> [UART, PM25] Reading data...
19:52:37:679 -> [UART, PM25] Data not available.
19:52:37:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:679 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:679 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:700 -> [UART, PM25] Reading data...
19:52:37:700 -> [UART, PM25] Data not available.
19:52:37:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:700 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:700 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:720 -> [UART, PM25] Reading data...
19:52:37:721 -> [UART, PM25] Data not available.
19:52:37:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:721 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:721 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:741 -> [UART, PM25] Reading data...
19:52:37:742 -> [UART, PM25] Data not available.
19:52:37:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:742 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:742 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:763 -> [UART, PM25] Reading data...
19:52:37:763 -> [UART, PM25] Data not available.
19:52:37:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:763 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:763 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:783 -> [UART, PM25] Reading data...
19:52:37:786 -> [UART, PM25] Data not available.
19:52:37:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:786 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:786 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:804 -> [UART, PM25] Reading data...
19:52:37:805 -> [UART, PM25] Data not available.
19:52:37:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:805 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:805 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:825 -> [UART, PM25] Reading data...
19:52:37:826 -> [UART, PM25] Data not available.
19:52:37:826 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:826 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:826 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:826 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:846 -> [UART, PM25] Reading data...
19:52:37:847 -> [UART, PM25] Data not available.
19:52:37:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:847 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:847 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:874 -> [UART, PM25] Reading data...
19:52:37:874 -> [UART, PM25] Data not available.
19:52:37:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:874 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:874 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:888 -> [UART, PM25] Reading data...
19:52:37:890 -> [UART, PM25] Data not available.
19:52:37:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:890 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:890 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:909 -> [UART, PM25] Reading data...
19:52:37:910 -> [UART, PM25] Data not available.
19:52:37:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:910 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:910 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:930 -> [UART, PM25] Reading data...
19:52:37:931 -> [UART, PM25] Data not available.
19:52:37:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:931 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:931 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:951 -> [UART, PM25] Reading data...
19:52:37:952 -> [UART, PM25] Data not available.
19:52:37:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:952 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:952 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:972 -> [UART, PM25] Reading data...
19:52:37:973 -> [UART, PM25] Data not available.
19:52:37:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:973 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:973 -> [UART, PM25] Uart available, resetting event queue..
19:52:37:993 -> [UART, PM25] Reading data...
19:52:37:994 -> [UART, PM25] Data not available.
19:52:37:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:37:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:37:994 -> [UART, PM25] Uart available, clearing write errors..
19:52:37:994 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:014 -> [UART, PM25] Reading data...
19:52:38:015 -> [UART, PM25] Data not available.
19:52:38:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:015 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:015 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:035 -> [UART, PM25] Reading data...
19:52:38:036 -> [UART, PM25] Data not available.
19:52:38:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:036 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:036 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:056 -> [UART, PM25] Reading data...
19:52:38:057 -> [UART, PM25] Data not available.
19:52:38:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:057 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:057 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:077 -> [UART, PM25] Reading data...
19:52:38:078 -> [UART, PM25] Data not available.
19:52:38:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:078 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:078 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:098 -> [UART, PM25] Reading data...
19:52:38:099 -> [UART, PM25] Data not available.
19:52:38:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:099 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:099 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:119 -> [UART, PM25] Reading data...
19:52:38:120 -> [UART, PM25] Data not available.
19:52:38:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:120 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:120 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:140 -> [UART, PM25] Reading data...
19:52:38:141 -> [UART, PM25] Data not available.
19:52:38:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:141 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:141 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:161 -> [UART, PM25] Reading data...
19:52:38:162 -> [UART, PM25] Data not available.
19:52:38:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:162 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:162 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:182 -> [UART, PM25] Reading data...
19:52:38:183 -> [UART, PM25] Data not available.
19:52:38:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:183 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:183 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:203 -> [UART, PM25] Reading data...
19:52:38:204 -> [UART, PM25] Data not available.
19:52:38:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:204 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:204 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:224 -> [UART, PM25] Reading data...
19:52:38:225 -> [UART, PM25] Data not available.
19:52:38:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:225 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:225 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:245 -> [UART, PM25] Reading data...
19:52:38:246 -> [UART, PM25] Data not available.
19:52:38:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:246 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:246 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:266 -> [UART, PM25] Reading data...
19:52:38:267 -> [UART, PM25] Data not available.
19:52:38:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:267 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:267 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:287 -> [UART, PM25] Reading data...
19:52:38:288 -> [UART, PM25] Data not available.
19:52:38:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:288 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:288 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:308 -> [UART, PM25] Reading data...
19:52:38:308 -> [UART, PM25] Data not available.
19:52:38:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:309 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:309 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:329 -> [UART, PM25] Reading data...
19:52:38:330 -> [UART, PM25] Data not available.
19:52:38:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:330 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:330 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:350 -> [UART, PM25] Reading data...
19:52:38:351 -> [UART, PM25] Data not available.
19:52:38:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:351 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:351 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:371 -> [UART, PM25] Reading data...
19:52:38:372 -> [UART, PM25] Data not available.
19:52:38:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:372 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:372 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:397 -> [UART, PM25] Reading data...
19:52:38:398 -> [UART, PM25] Data not available.
19:52:38:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:398 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:398 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:414 -> [UART, PM25] Reading data...
19:52:38:414 -> [UART, PM25] Data not available.
19:52:38:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:414 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:414 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:434 -> [UART, PM25] Reading data...
19:52:38:435 -> [UART, PM25] Data not available.
19:52:38:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:435 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:435 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:455 -> [UART, PM25] Reading data...
19:52:38:456 -> [UART, PM25] Data not available.
19:52:38:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:456 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:456 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:476 -> [UART, PM25] Reading data...
19:52:38:477 -> [UART, PM25] Data not available.
19:52:38:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:477 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:477 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:497 -> [UART, PM25] Reading data...
19:52:38:498 -> [UART, PM25] Data not available.
19:52:38:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:498 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:498 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:518 -> [UART, PM25] Reading data...
19:52:38:519 -> [UART, PM25] Data not available.
19:52:38:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:519 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:519 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:540 -> [UART, PM25] Reading data...
19:52:38:540 -> [UART, PM25] Data not available.
19:52:38:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:540 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:540 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:560 -> [UART, PM25] Reading data...
19:52:38:561 -> [UART, PM25] Data not available.
19:52:38:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:561 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:561 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:584 -> [UART, PM25] Reading data...
19:52:38:585 -> [UART, PM25] Data not available.
19:52:38:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:585 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:585 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:602 -> [UART, PM25] Reading data...
19:52:38:603 -> [UART, PM25] Data not available.
19:52:38:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:603 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:603 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:623 -> [UART, PM25] Reading data...
19:52:38:623 -> [UART, PM25] Data not available.
19:52:38:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:644 -> [UART, PM25] Reading data...
19:52:38:645 -> [UART, PM25] Data not available.
19:52:38:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:645 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:645 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:665 -> [UART, PM25] Reading data...
19:52:38:666 -> [UART, PM25] Data not available.
19:52:38:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:666 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:666 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:687 -> [UART, PM25] Reading data...
19:52:38:687 -> [UART, PM25] Data not available.
19:52:38:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:687 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:687 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:707 -> [UART, PM25] Reading data...
19:52:38:708 -> [UART, PM25] Data not available.
19:52:38:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:708 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:708 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:728 -> [UART, PM25] Reading data...
19:52:38:729 -> [UART, PM25] Data not available.
19:52:38:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:729 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:729 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:768 -> [UART, PM25] Reading data...
19:52:38:772 -> [UART, PM25] Data not available.
19:52:38:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:772 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:772 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:772 -> [UART, PM25] Reading data...
19:52:38:772 -> [UART, PM25] Data not available.
19:52:38:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:772 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:772 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:791 -> [UART, PM25] Reading data...
19:52:38:792 -> [UART, PM25] Data not available.
19:52:38:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:792 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:792 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:812 -> [UART, PM25] Reading data...
19:52:38:813 -> [UART, PM25] Data not available.
19:52:38:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:813 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:813 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:833 -> [UART, PM25] Reading data...
19:52:38:834 -> [UART, PM25] Data not available.
19:52:38:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:834 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:834 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:854 -> [UART, PM25] Reading data...
19:52:38:855 -> [UART, PM25] Data not available.
19:52:38:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:855 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:855 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:875 -> [UART, PM25] Reading data...
19:52:38:876 -> [UART, PM25] Data not available.
19:52:38:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:876 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:876 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:896 -> [UART, PM25] Reading data...
19:52:38:908 -> [UART, PM25] Data not available.
19:52:38:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:908 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:908 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:917 -> [UART, PM25] Reading data...
19:52:38:918 -> [UART, PM25] Data not available.
19:52:38:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:918 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:918 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:939 -> [UART, PM25] Reading data...
19:52:38:939 -> [UART, PM25] Data not available.
19:52:38:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:939 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:939 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:959 -> [UART, PM25] Reading data...
19:52:38:960 -> [UART, PM25] Data not available.
19:52:38:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:960 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:960 -> [UART, PM25] Uart available, resetting event queue..
19:52:38:980 -> [UART, PM25] Reading data...
19:52:38:985 -> [UART, PM25] Data not available.
19:52:38:985 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:38:985 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:38:985 -> [UART, PM25] Uart available, clearing write errors..
19:52:38:985 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:001 -> [UART, PM25] Reading data...
19:52:39:002 -> [UART, PM25] Data not available.
19:52:39:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:002 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:002 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:022 -> [UART, PM25] Reading data...
19:52:39:023 -> [UART, PM25] Data not available.
19:52:39:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:023 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:023 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:043 -> [UART, PM25] Reading data...
19:52:39:044 -> [UART, PM25] Data not available.
19:52:39:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:044 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:044 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:064 -> [UART, PM25] Reading data...
19:52:39:065 -> [UART, PM25] Data not available.
19:52:39:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:065 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:065 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:085 -> [UART, PM25] Reading data...
19:52:39:086 -> [UART, PM25] Data not available.
19:52:39:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:086 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:086 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:106 -> [UART, PM25] Reading data...
19:52:39:107 -> [UART, PM25] Data not available.
19:52:39:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:107 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:107 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:127 -> [UART, PM25] Reading data...
19:52:39:128 -> [UART, PM25] Data not available.
19:52:39:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:128 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:128 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:148 -> [UART, PM25] Reading data...
19:52:39:149 -> [UART, PM25] Data not available.
19:52:39:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:149 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:149 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:169 -> [UART, PM25] Reading data...
19:52:39:170 -> [UART, PM25] Data not available.
19:52:39:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:170 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:170 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:190 -> [UART, PM25] Reading data...
19:52:39:191 -> [UART, PM25] Data not available.
19:52:39:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:191 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:191 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:211 -> [UART, PM25] Reading data...
19:52:39:212 -> [UART, PM25] Data not available.
19:52:39:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:212 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:212 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:212 -> PING!
19:52:39:425 -> [UART, PM25] Reading data...
19:52:39:426 -> [UART, PM25] Data not available.
19:52:39:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:426 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:426 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:446 -> [UART, PM25] Reading data...
19:52:39:447 -> [UART, PM25] Data not available.
19:52:39:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:447 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:447 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:467 -> [UART, PM25] Reading data...
19:52:39:468 -> [UART, PM25] Data not available.
19:52:39:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:468 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:468 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:488 -> [UART, PM25] Reading data...
19:52:39:489 -> [UART, PM25] Data not available.
19:52:39:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:489 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:489 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:509 -> [UART, PM25] Reading data...
19:52:39:510 -> [UART, PM25] Data not available.
19:52:39:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:510 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:510 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:530 -> [UART, PM25] Reading data...
19:52:39:531 -> [UART, PM25] Data not available.
19:52:39:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:531 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:531 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:551 -> [UART, PM25] Reading data...
19:52:39:552 -> [UART, PM25] Data not available.
19:52:39:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:552 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:552 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:572 -> [UART, PM25] Reading data...
19:52:39:573 -> [UART, PM25] Data not available.
19:52:39:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:573 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:573 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:593 -> [UART, PM25] Reading data...
19:52:39:594 -> [UART, PM25] Data not available.
19:52:39:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:594 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:594 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:615 -> [UART, PM25] Reading data...
19:52:39:615 -> [UART, PM25] Data not available.
19:52:39:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:615 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:615 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:635 -> [UART, PM25] Reading data...
19:52:39:636 -> [UART, PM25] Data not available.
19:52:39:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:636 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:636 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:656 -> [UART, PM25] Reading data...
19:52:39:657 -> [UART, PM25] Data not available.
19:52:39:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:657 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:657 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:677 -> [UART, PM25] Reading data...
19:52:39:678 -> [UART, PM25] Data not available.
19:52:39:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:678 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:678 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:698 -> [UART, PM25] Reading data...
19:52:39:699 -> [UART, PM25] Data not available.
19:52:39:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:699 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:699 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:720 -> [UART, PM25] Reading data...
19:52:39:720 -> [UART, PM25] Data not available.
19:52:39:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:720 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:720 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:740 -> [UART, PM25] Reading data...
19:52:39:741 -> [UART, PM25] Data not available.
19:52:39:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:741 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:741 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:761 -> [UART, PM25] Reading data...
19:52:39:762 -> [UART, PM25] Data not available.
19:52:39:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:782 -> [UART, PM25] Reading data...
19:52:39:783 -> [UART, PM25] Data not available.
19:52:39:783 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:783 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:783 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:783 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:803 -> [UART, PM25] Reading data...
19:52:39:804 -> [UART, PM25] Data not available.
19:52:39:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:804 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:804 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:824 -> [UART, PM25] Reading data...
19:52:39:825 -> [UART, PM25] Data not available.
19:52:39:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:825 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:825 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:845 -> [UART, PM25] Reading data...
19:52:39:846 -> [UART, PM25] Data not available.
19:52:39:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:846 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:846 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:866 -> [UART, PM25] Reading data...
19:52:39:867 -> [UART, PM25] Data not available.
19:52:39:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:867 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:867 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:887 -> [UART, PM25] Reading data...
19:52:39:888 -> [UART, PM25] Data not available.
19:52:39:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:888 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:888 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:908 -> [UART, PM25] Reading data...
19:52:39:909 -> [UART, PM25] Data not available.
19:52:39:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:909 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:909 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:940 -> [UART, PM25] Reading data...
19:52:39:940 -> [UART, PM25] Data not available.
19:52:39:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:950 -> [UART, PM25] Reading data...
19:52:39:951 -> [UART, PM25] Data not available.
19:52:39:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:951 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:951 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:972 -> [UART, PM25] Reading data...
19:52:39:973 -> [UART, PM25] Data not available.
19:52:39:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:973 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:973 -> [UART, PM25] Uart available, resetting event queue..
19:52:39:992 -> [UART, PM25] Reading data...
19:52:39:992 -> [UART, PM25] Data not available.
19:52:39:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:39:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:39:992 -> [UART, PM25] Uart available, clearing write errors..
19:52:39:992 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:013 -> [UART, PM25] Reading data...
19:52:40:014 -> [UART, PM25] Data not available.
19:52:40:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:014 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:014 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:034 -> [UART, PM25] Reading data...
19:52:40:035 -> [UART, PM25] Data not available.
19:52:40:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:035 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:035 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:055 -> [UART, PM25] Reading data...
19:52:40:056 -> [UART, PM25] Data not available.
19:52:40:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:056 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:056 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:076 -> [UART, PM25] Reading data...
19:52:40:077 -> [UART, PM25] Data not available.
19:52:40:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:077 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:077 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:097 -> [UART, PM25] Reading data...
19:52:40:098 -> [UART, PM25] Data not available.
19:52:40:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:098 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:098 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:118 -> [UART, PM25] Reading data...
19:52:40:119 -> [UART, PM25] Data not available.
19:52:40:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:119 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:119 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:139 -> [UART, PM25] Reading data...
19:52:40:140 -> [UART, PM25] Data not available.
19:52:40:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:140 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:140 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:160 -> [UART, PM25] Reading data...
19:52:40:161 -> [UART, PM25] Data not available.
19:52:40:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:181 -> [UART, PM25] Reading data...
19:52:40:182 -> [UART, PM25] Data not available.
19:52:40:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:182 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:182 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:202 -> [UART, PM25] Reading data...
19:52:40:203 -> [UART, PM25] Data not available.
19:52:40:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:203 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:203 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:223 -> [UART, PM25] Reading data...
19:52:40:224 -> [UART, PM25] Data not available.
19:52:40:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:224 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:224 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:244 -> [UART, PM25] Reading data...
19:52:40:245 -> [UART, PM25] Data not available.
19:52:40:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:245 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:245 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:265 -> [UART, PM25] Reading data...
19:52:40:266 -> [UART, PM25] Data not available.
19:52:40:266 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:266 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:266 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:266 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:286 -> [UART, PM25] Reading data...
19:52:40:287 -> [UART, PM25] Data not available.
19:52:40:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:287 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:287 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:307 -> [UART, PM25] Reading data...
19:52:40:308 -> [UART, PM25] Data not available.
19:52:40:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:328 -> [UART, PM25] Reading data...
19:52:40:329 -> [UART, PM25] Data not available.
19:52:40:329 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:329 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:329 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:329 -> [UART, PM25] Uart available, resetting event queue..

19:52:40:350 -> [UART, PM25] Data not available.
19:52:40:350 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:350 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:350 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:350 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:372 -> [UART, PM25] Reading data...
19:52:40:373 -> [UART, PM25] Data not available.
19:52:40:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:373 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:373 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:350 -> [UART, PM25] Reading data...19:52:40:391 -> [UART, PM25] Reading data...
19:52:40:392 -> [UART, PM25] Data not available.
19:52:40:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:392 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:392 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:412 -> [UART, PM25] Reading data...
19:52:40:412 -> [UART, PM25] Data not available.
19:52:40:413 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:413 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:413 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:413 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:433 -> [UART, PM25] Reading data...
19:52:40:433 -> [UART, PM25] Data not available.
19:52:40:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:434 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:434 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:457 -> [UART, PM25] Reading data...
19:52:40:458 -> [UART, PM25] Data not available.
19:52:40:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:458 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:458 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:475 -> [UART, PM25] Reading data...
19:52:40:476 -> [UART, PM25] Data not available.
19:52:40:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:476 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:476 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:496 -> [UART, PM25] Reading data...
19:52:40:496 -> [UART, PM25] Data not available.
19:52:40:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:496 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:496 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:517 -> [UART, PM25] Reading data...
19:52:40:518 -> [UART, PM25] Data not available.
19:52:40:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:518 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:518 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:539 -> [UART, PM25] Reading data...
19:52:40:539 -> [UART, PM25] Data not available.
19:52:40:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:539 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:539 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:559 -> [UART, PM25] Reading data...
19:52:40:560 -> [UART, PM25] Data not available.
19:52:40:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:560 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:560 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:580 -> [UART, PM25] Reading data...
19:52:40:580 -> [UART, PM25] Data not available.
19:52:40:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:581 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:581 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:601 -> [UART, PM25] Reading data...
19:52:40:602 -> [UART, PM25] Data not available.
19:52:40:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:622 -> [UART, PM25] Reading data...
19:52:40:622 -> [UART, PM25] Data not available.
19:52:40:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:643 -> [UART, PM25] Reading data...
19:52:40:644 -> [UART, PM25] Data not available.
19:52:40:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:668 -> [UART, PM25] Reading data...
19:52:40:704 -> [UART, PM25] Data not available.
19:52:40:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:704 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:704 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:704 -> [UART, PM25] Reading data...
19:52:40:704 -> [UART, PM25] Data not available.
19:52:40:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:704 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:704 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:708 -> [UART, PM25] Reading data...
19:52:40:708 -> [UART, PM25] Data not available.
19:52:40:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:708 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:708 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:736 -> [UART, PM25] Reading data...
19:52:40:736 -> [UART, PM25] Data not available.
19:52:40:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:748 -> [UART, PM25] Reading data...
19:52:40:749 -> [UART, PM25] Data not available.
19:52:40:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:749 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:749 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:773 -> [UART, PM25] Reading data...
19:52:40:776 -> [UART, PM25] Data not available.
19:52:40:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:776 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:776 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:791 -> [UART, PM25] Reading data...
19:52:40:804 -> [UART, PM25] Data not available.
19:52:40:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:804 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:804 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:811 -> [UART, PM25] Reading data...
19:52:40:812 -> [UART, PM25] Data not available.
19:52:40:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:832 -> [UART, PM25] Reading data...
19:52:40:833 -> [UART, PM25] Data not available.
19:52:40:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:833 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:833 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:858 -> [UART, PM25] Reading data...
19:52:40:859 -> [UART, PM25] Data not available.
19:52:40:859 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:859 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:859 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:859 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:874 -> [UART, PM25] Reading data...
19:52:40:874 -> [UART, PM25] Data not available.
19:52:40:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:874 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:874 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:895 -> [UART, PM25] Reading data...
19:52:40:896 -> [UART, PM25] Data not available.
19:52:40:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:916 -> [UART, PM25] Reading data...
19:52:40:918 -> [UART, PM25] Data not available.
19:52:40:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:918 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:918 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:937 -> [UART, PM25] Reading data...
19:52:40:938 -> [UART, PM25] Data not available.
19:52:40:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:977 -> [UART, PM25] Reading data...
19:52:40:986 -> [UART, PM25] Data not available.
19:52:40:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:986 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:986 -> [UART, PM25] Uart available, resetting event queue..
19:52:40:986 -> [UART, PM25] Reading data...
19:52:40:986 -> [UART, PM25] Data not available.
19:52:40:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:40:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:40:986 -> [UART, PM25] Uart available, clearing write errors..
19:52:40:986 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:000 -> [UART, PM25] Reading data...
19:52:41:001 -> [UART, PM25] Data not available.
19:52:41:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:021 -> [UART, PM25] Reading data...
19:52:41:022 -> [UART, PM25] Data not available.
19:52:41:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:042 -> [UART, PM25] Reading data...
19:52:41:043 -> [UART, PM25] Data not available.
19:52:41:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:063 -> [UART, PM25] Reading data...
19:52:41:065 -> [UART, PM25] Data not available.
19:52:41:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:065 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:065 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:084 -> [UART, PM25] Reading data...
19:52:41:085 -> [UART, PM25] Data not available.
19:52:41:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:085 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:085 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:105 -> [UART, PM25] Reading data...
19:52:41:106 -> [UART, PM25] Data not available.
19:52:41:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:106 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:106 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:126 -> [UART, PM25] Reading data...
19:52:41:127 -> [UART, PM25] Data not available.
19:52:41:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:127 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:127 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:147 -> [UART, PM25] Reading data...
19:52:41:148 -> [UART, PM25] Data not available.
19:52:41:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:148 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:148 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:168 -> [UART, PM25] Reading data...
19:52:41:168 -> [UART, PM25] Data not available.
19:52:41:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:189 -> [UART, PM25] Reading data...
19:52:41:190 -> [UART, PM25] Data not available.
19:52:41:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:190 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:190 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:210 -> [UART, PM25] Reading data...
19:52:41:210 -> [UART, PM25] Data not available.
19:52:41:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:210 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:210 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:231 -> [UART, PM25] Reading data...
19:52:41:231 -> [UART, PM25] Data not available.
19:52:41:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:231 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:231 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:252 -> [UART, PM25] Reading data...
19:52:41:253 -> [UART, PM25] Data not available.
19:52:41:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:273 -> [UART, PM25] Reading data...
19:52:41:274 -> [UART, PM25] Data not available.
19:52:41:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:274 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:274 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:294 -> [UART, PM25] Reading data...
19:52:41:294 -> [UART, PM25] Data not available.
19:52:41:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:294 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:294 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:315 -> [UART, PM25] Reading data...
19:52:41:316 -> [UART, PM25] Data not available.
19:52:41:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:316 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:316 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:336 -> [UART, PM25] Reading data...
19:52:41:337 -> [UART, PM25] Data not available.
19:52:41:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:357 -> [UART, PM25] Reading data...
19:52:41:358 -> [UART, PM25] Data not available.
19:52:41:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:378 -> [UART, PM25] Reading data...
19:52:41:379 -> [UART, PM25] Data not available.
19:52:41:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:399 -> [UART, PM25] Reading data...
19:52:41:400 -> [UART, PM25] Data not available.
19:52:41:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:400 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:400 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:420 -> [UART, PM25] Reading data...
19:52:41:421 -> [UART, PM25] Data not available.
19:52:41:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:421 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:421 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:441 -> [UART, PM25] Reading data...
19:52:41:442 -> [UART, PM25] Data not available.
19:52:41:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:442 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:442 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:462 -> [UART, PM25] Reading data...
19:52:41:463 -> [UART, PM25] Data not available.
19:52:41:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:463 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:463 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:493 -> [UART, PM25] Reading data...
19:52:41:493 -> [UART, PM25] Data not available.
19:52:41:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:493 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:493 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:507 -> [UART, PM25] Reading data...
19:52:41:508 -> [UART, PM25] Data not available.
19:52:41:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:508 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:508 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:526 -> [UART, PM25] Reading data...
19:52:41:526 -> [UART, PM25] Data not available.
19:52:41:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:546 -> [UART, PM25] Reading data...
19:52:41:547 -> [UART, PM25] Data not available.
19:52:41:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:547 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:547 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:567 -> [UART, PM25] Reading data...
19:52:41:568 -> [UART, PM25] Data not available.
19:52:41:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:568 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:568 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:589 -> [UART, PM25] Reading data...
19:52:41:589 -> [UART, PM25] Data not available.
19:52:41:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:589 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:589 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:609 -> [UART, PM25] Reading data...
19:52:41:609 -> [UART, PM25] Data not available.
19:52:41:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:610 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:610 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:630 -> [UART, PM25] Reading data...
19:52:41:631 -> [UART, PM25] Data not available.
19:52:41:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:631 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:631 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:651 -> [UART, PM25] Reading data...
19:52:41:652 -> [UART, PM25] Data not available.
19:52:41:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:673 -> [UART, PM25] Reading data...
19:52:41:674 -> [UART, PM25] Data not available.
19:52:41:674 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:674 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:674 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:674 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:693 -> [UART, PM25] Reading data...
19:52:41:694 -> [UART, PM25] Data not available.
19:52:41:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:694 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:694 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:714 -> [UART, PM25] Reading data...
19:52:41:715 -> [UART, PM25] Data not available.
19:52:41:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:715 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:715 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:735 -> [UART, PM25] Reading data...
19:52:41:735 -> [UART, PM25] Data not available.
19:52:41:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:761 -> [UART, PM25] Reading data...
19:52:41:762 -> [UART, PM25] Data not available.
19:52:41:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:762 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:762 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:777 -> [UART, PM25] Reading data...
19:52:41:778 -> [UART, PM25] Data not available.
19:52:41:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:778 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:778 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:802 -> [UART, PM25] Reading data...
19:52:41:803 -> [UART, PM25] Data not available.
19:52:41:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:803 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:803 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:819 -> [UART, PM25] Reading data...
19:52:41:820 -> [UART, PM25] Data not available.
19:52:41:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:820 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:820 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:841 -> [UART, PM25] Reading data...
19:52:41:844 -> [UART, PM25] Data not available.
19:52:41:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:844 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:844 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:863 -> [UART, PM25] Reading data...
19:52:41:863 -> [UART, PM25] Data not available.
19:52:41:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:863 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:863 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:882 -> [UART, PM25] Reading data...
19:52:41:883 -> [UART, PM25] Data not available.
19:52:41:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:883 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:883 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:903 -> [UART, PM25] Reading data...
19:52:41:903 -> [UART, PM25] Data not available.
19:52:41:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:903 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:903 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:924 -> [UART, PM25] Reading data...
19:52:41:925 -> [UART, PM25] Data not available.
19:52:41:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:945 -> [UART, PM25] Reading data...
19:52:41:946 -> [UART, PM25] Data not available.
19:52:41:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:946 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:946 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:966 -> [UART, PM25] Reading data...
19:52:41:967 -> [UART, PM25] Data not available.
19:52:41:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:41:987 -> [UART, PM25] Reading data...
19:52:41:991 -> [UART, PM25] Data not available.
19:52:41:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:41:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:41:991 -> [UART, PM25] Uart available, clearing write errors..
19:52:41:991 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:009 -> [UART, PM25] Reading data...
19:52:42:039 -> [UART, PM25] Data not available.
19:52:42:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:039 -> [UART, PM25] Reading data...
19:52:42:039 -> [UART, PM25] Data not available.
19:52:42:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:050 -> [UART, PM25] Reading data...
19:52:42:051 -> [UART, PM25] Data not available.
19:52:42:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:051 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:051 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:071 -> [UART, PM25] Reading data...
19:52:42:072 -> [UART, PM25] Data not available.
19:52:42:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:072 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:072 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:092 -> [UART, PM25] Reading data...
19:52:42:092 -> [UART, PM25] Data not available.
19:52:42:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:093 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:093 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:113 -> [UART, PM25] Reading data...
19:52:42:114 -> [UART, PM25] Data not available.
19:52:42:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:114 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:114 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:134 -> [UART, PM25] Reading data...
19:52:42:135 -> [UART, PM25] Data not available.
19:52:42:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:135 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:135 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:155 -> [UART, PM25] Reading data...
19:52:42:156 -> [UART, PM25] Data not available.
19:52:42:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:176 -> [UART, PM25] Reading data...
19:52:42:176 -> [UART, PM25] Data not available.
19:52:42:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:177 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:177 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:197 -> [UART, PM25] Reading data...
19:52:42:197 -> [UART, PM25] Data not available.
19:52:42:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:218 -> [UART, PM25] Reading data...
19:52:42:219 -> [UART, PM25] Data not available.
19:52:42:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:219 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:219 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:239 -> [UART, PM25] Reading data...
19:52:42:240 -> [UART, PM25] Data not available.
19:52:42:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:240 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:240 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:260 -> [UART, PM25] Reading data...
19:52:42:261 -> [UART, PM25] Data not available.
19:52:42:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:261 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:261 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:281 -> [UART, PM25] Reading data...
19:52:42:282 -> [UART, PM25] Data not available.
19:52:42:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:282 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:282 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:302 -> [UART, PM25] Reading data...
19:52:42:302 -> [UART, PM25] Data not available.
19:52:42:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:323 -> [UART, PM25] Reading data...
19:52:42:324 -> [UART, PM25] Data not available.
19:52:42:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:324 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:324 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:344 -> [UART, PM25] Reading data...
19:52:42:344 -> [UART, PM25] Data not available.
19:52:42:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:345 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:345 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:366 -> [UART, PM25] Reading data...
19:52:42:366 -> [UART, PM25] Data not available.
19:52:42:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:366 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:366 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:386 -> [UART, PM25] Reading data...
19:52:42:386 -> [UART, PM25] Data not available.
19:52:42:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:387 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:387 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:407 -> [UART, PM25] Reading data...
19:52:42:408 -> [UART, PM25] Data not available.
19:52:42:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:408 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:408 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:428 -> [UART, PM25] Reading data...
19:52:42:428 -> [UART, PM25] Data not available.
19:52:42:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:429 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:429 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:450 -> [UART, PM25] Reading data...
19:52:42:451 -> [UART, PM25] Data not available.
19:52:42:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:451 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:451 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:470 -> [UART, PM25] Reading data...
19:52:42:470 -> [UART, PM25] Data not available.
19:52:42:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:471 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:471 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:491 -> [UART, PM25] Reading data...
19:52:42:491 -> [UART, PM25] Data not available.
19:52:42:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:492 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:492 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:522 -> [UART, PM25] Reading data...
19:52:42:523 -> [UART, PM25] Data not available.
19:52:42:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:523 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:523 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:533 -> [UART, PM25] Reading data...
19:52:42:533 -> [UART, PM25] Data not available.
19:52:42:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:533 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:533 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:554 -> [UART, PM25] Reading data...
19:52:42:555 -> [UART, PM25] Data not available.
19:52:42:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:555 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:555 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:575 -> [UART, PM25] Reading data...
19:52:42:575 -> [UART, PM25] Data not available.
19:52:42:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:576 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:576 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:596 -> [UART, PM25] Reading data...
19:52:42:599 -> [UART, PM25] Data not available.
19:52:42:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:599 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:599 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:617 -> [UART, PM25] Reading data...
19:52:42:617 -> [UART, PM25] Data not available.
19:52:42:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:618 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:618 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:638 -> [UART, PM25] Reading data...
19:52:42:639 -> [UART, PM25] Data not available.
19:52:42:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:639 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:639 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:659 -> [UART, PM25] Reading data...
19:52:42:660 -> [UART, PM25] Data not available.
19:52:42:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:660 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:660 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:680 -> [UART, PM25] Reading data...
19:52:42:680 -> [UART, PM25] Data not available.
19:52:42:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:681 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:681 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:701 -> [UART, PM25] Reading data...
19:52:42:702 -> [UART, PM25] Data not available.
19:52:42:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:702 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:702 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:722 -> [UART, PM25] Reading data...
19:52:42:722 -> [UART, PM25] Data not available.
19:52:42:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:723 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:723 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:743 -> [UART, PM25] Reading data...
19:52:42:744 -> [UART, PM25] Data not available.
19:52:42:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:744 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:744 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:764 -> [UART, PM25] Reading data...
19:52:42:765 -> [UART, PM25] Data not available.
19:52:42:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:765 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:765 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:786 -> [UART, PM25] Reading data...
19:52:42:786 -> [UART, PM25] Data not available.
19:52:42:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:786 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:786 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:806 -> [UART, PM25] Reading data...
19:52:42:807 -> [UART, PM25] Data not available.
19:52:42:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:807 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:807 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:827 -> [UART, PM25] Reading data...
19:52:42:828 -> [UART, PM25] Data not available.
19:52:42:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:828 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:828 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:848 -> [UART, PM25] Reading data...
19:52:42:849 -> [UART, PM25] Data not available.
19:52:42:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:849 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:849 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:869 -> [UART, PM25] Reading data...
19:52:42:870 -> [UART, PM25] Data not available.
19:52:42:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:870 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:870 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:890 -> [UART, PM25] Reading data...
19:52:42:890 -> [UART, PM25] Data not available.
19:52:42:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:891 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:891 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:911 -> [UART, PM25] Reading data...
19:52:42:912 -> [UART, PM25] Data not available.
19:52:42:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:912 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:912 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:932 -> [UART, PM25] Reading data...
19:52:42:932 -> [UART, PM25] Data not available.
19:52:42:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:932 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:932 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:953 -> [UART, PM25] Reading data...
19:52:42:954 -> [UART, PM25] Data not available.
19:52:42:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:954 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:954 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:974 -> [UART, PM25] Reading data...
19:52:42:975 -> [UART, PM25] Data not available.
19:52:42:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:975 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:975 -> [UART, PM25] Uart available, resetting event queue..
19:52:42:995 -> [UART, PM25] Reading data...
19:52:42:996 -> [UART, PM25] Data not available.
19:52:42:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:42:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:42:996 -> [UART, PM25] Uart available, clearing write errors..
19:52:42:996 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:016 -> [UART, PM25] Reading data...
19:52:43:017 -> [UART, PM25] Data not available.
19:52:43:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:017 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:017 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:041 -> [UART, PM25] Reading data...
19:52:43:041 -> [UART, PM25] Data not available.
19:52:43:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:041 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:041 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:062 -> [UART, PM25] Reading data...
19:52:43:063 -> [UART, PM25] Data not available.
19:52:43:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:063 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:063 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:079 -> [UART, PM25] Reading data...
19:52:43:080 -> [UART, PM25] Data not available.
19:52:43:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:080 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:080 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:100 -> [UART, PM25] Reading data...
19:52:43:101 -> [UART, PM25] Data not available.
19:52:43:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:101 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:101 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:124 -> [UART, PM25] Reading data...
19:52:43:125 -> [UART, PM25] Data not available.
19:52:43:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:125 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:125 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:142 -> [UART, PM25] Reading data...
19:52:43:143 -> [UART, PM25] Data not available.
19:52:43:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:143 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:143 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:164 -> [UART, PM25] Reading data...
19:52:43:165 -> [UART, PM25] Data not available.
19:52:43:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:165 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:165 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:185 -> [UART, PM25] Reading data...
19:52:43:185 -> [UART, PM25] Data not available.
19:52:43:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:185 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:185 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:205 -> [UART, PM25] Reading data...
19:52:43:206 -> [UART, PM25] Data not available.
19:52:43:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:206 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:206 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:228 -> [UART, PM25] Reading data...
19:52:43:229 -> [UART, PM25] Data not available.
19:52:43:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:229 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:229 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:247 -> [UART, PM25] Reading data...
19:52:43:248 -> [UART, PM25] Data not available.
19:52:43:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:248 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:248 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:268 -> [UART, PM25] Reading data...
19:52:43:269 -> [UART, PM25] Data not available.
19:52:43:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:269 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:269 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:289 -> [UART, PM25] Reading data...
19:52:43:290 -> [UART, PM25] Data not available.
19:52:43:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:290 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:290 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:310 -> [UART, PM25] Reading data...
19:52:43:311 -> [UART, PM25] Data not available.
19:52:43:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:311 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:311 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:331 -> [UART, PM25] Reading data...
19:52:43:331 -> [UART, PM25] Data not available.
19:52:43:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:331 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:331 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:352 -> [UART, PM25] Reading data...
19:52:43:353 -> [UART, PM25] Data not available.
19:52:43:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:353 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:353 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:373 -> [UART, PM25] Reading data...
19:52:43:374 -> [UART, PM25] Data not available.
19:52:43:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:374 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:374 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:394 -> [UART, PM25] Reading data...
19:52:43:395 -> [UART, PM25] Data not available.
19:52:43:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:395 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:395 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:415 -> [UART, PM25] Reading data...
19:52:43:416 -> [UART, PM25] Data not available.
19:52:43:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:416 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:416 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:436 -> [UART, PM25] Reading data...
19:52:43:437 -> [UART, PM25] Data not available.
19:52:43:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:437 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:437 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:457 -> [UART, PM25] Reading data...
19:52:43:458 -> [UART, PM25] Data not available.
19:52:43:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:458 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:458 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:506 -> [UART, PM25] Reading data...
19:52:43:518 -> [UART, PM25] Data not available.
19:52:43:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:518 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:518 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:518 -> [UART, PM25] Reading data...
19:52:43:518 -> [UART, PM25] Data not available.
19:52:43:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:518 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:518 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:524 -> [UART, PM25] Reading data...
19:52:43:524 -> [UART, PM25] Data not available.
19:52:43:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:524 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:524 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:555 -> [UART, PM25] Reading data...
19:52:43:555 -> [UART, PM25] Data not available.
19:52:43:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:555 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:555 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:562 -> [UART, PM25] Reading data...
19:52:43:562 -> [UART, PM25] Data not available.
19:52:43:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:563 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:563 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:583 -> [UART, PM25] Reading data...
19:52:43:584 -> [UART, PM25] Data not available.
19:52:43:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:584 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:584 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:604 -> [UART, PM25] Reading data...
19:52:43:604 -> [UART, PM25] Data not available.
19:52:43:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:605 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:605 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:625 -> [UART, PM25] Reading data...
19:52:43:626 -> [UART, PM25] Data not available.
19:52:43:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:626 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:626 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:646 -> [UART, PM25] Reading data...
19:52:43:647 -> [UART, PM25] Data not available.
19:52:43:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:647 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:647 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:667 -> [UART, PM25] Reading data...
19:52:43:668 -> [UART, PM25] Data not available.
19:52:43:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:668 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:668 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:688 -> [UART, PM25] Reading data...
19:52:43:689 -> [UART, PM25] Data not available.
19:52:43:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:689 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:689 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:709 -> [UART, PM25] Reading data...
19:52:43:710 -> [UART, PM25] Data not available.
19:52:43:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:710 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:710 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:730 -> [UART, PM25] Reading data...
19:52:43:731 -> [UART, PM25] Data not available.
19:52:43:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:731 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:731 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:751 -> [UART, PM25] Reading data...
19:52:43:751 -> [UART, PM25] Data not available.
19:52:43:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:752 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:752 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:772 -> [UART, PM25] Reading data...
19:52:43:773 -> [UART, PM25] Data not available.
19:52:43:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:773 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:773 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:793 -> [UART, PM25] Reading data...
19:52:43:794 -> [UART, PM25] Data not available.
19:52:43:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:794 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:794 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:815 -> [UART, PM25] Reading data...
19:52:43:815 -> [UART, PM25] Data not available.
19:52:43:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:815 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:815 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:835 -> [UART, PM25] Reading data...
19:52:43:836 -> [UART, PM25] Data not available.
19:52:43:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:836 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:836 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:857 -> [UART, PM25] Reading data...
19:52:43:858 -> [UART, PM25] Data not available.
19:52:43:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:877 -> [UART, PM25] Reading data...
19:52:43:877 -> [UART, PM25] Data not available.
19:52:43:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:877 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:877 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:898 -> [UART, PM25] Reading data...
19:52:43:899 -> [UART, PM25] Data not available.
19:52:43:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:899 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:899 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:919 -> [UART, PM25] Reading data...
19:52:43:920 -> [UART, PM25] Data not available.
19:52:43:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:43:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:43:920 -> [UART, PM25] Uart available, clearing write errors..
19:52:43:920 -> [UART, PM25] Uart available, resetting event queue..
19:52:43:920 -> PING!
19:52:44:133 -> [UART, PM25] Reading data...
19:52:44:134 -> [UART, PM25] Data not available.
19:52:44:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:134 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:134 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:156 -> [UART, PM25] Reading data...
19:52:44:161 -> [UART, PM25] Data not available.
19:52:44:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:161 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:161 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:175 -> [UART, PM25] Reading data...
19:52:44:176 -> [UART, PM25] Data not available.
19:52:44:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:176 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:176 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:196 -> [UART, PM25] Reading data...
19:52:44:197 -> [UART, PM25] Data not available.
19:52:44:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:197 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:197 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:217 -> [UART, PM25] Reading data...
19:52:44:218 -> [UART, PM25] Data not available.
19:52:44:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:218 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:218 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:238 -> [UART, PM25] Reading data...
19:52:44:239 -> [UART, PM25] Data not available.
19:52:44:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:239 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:239 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:259 -> [UART, PM25] Reading data...
19:52:44:260 -> [UART, PM25] Data not available.
19:52:44:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:260 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:260 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:280 -> [UART, PM25] Reading data...
19:52:44:281 -> [UART, PM25] Data not available.
19:52:44:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:281 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:281 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:301 -> [UART, PM25] Reading data...
19:52:44:302 -> [UART, PM25] Data not available.
19:52:44:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:302 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:302 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:322 -> [UART, PM25] Reading data...
19:52:44:323 -> [UART, PM25] Data not available.
19:52:44:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:323 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:323 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:343 -> [UART, PM25] Reading data...
19:52:44:344 -> [UART, PM25] Data not available.
19:52:44:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:344 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:344 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:364 -> [UART, PM25] Reading data...
19:52:44:365 -> [UART, PM25] Data not available.
19:52:44:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:365 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:365 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:385 -> [UART, PM25] Reading data...
19:52:44:386 -> [UART, PM25] Data not available.
19:52:44:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:386 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:386 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:406 -> [UART, PM25] Reading data...
19:52:44:407 -> [UART, PM25] Data not available.
19:52:44:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:407 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:407 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:428 -> [UART, PM25] Reading data...
19:52:44:428 -> [UART, PM25] Data not available.
19:52:44:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:428 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:428 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:450 -> [UART, PM25] Reading data...
19:52:44:451 -> [UART, PM25] Data not available.
19:52:44:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:451 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:451 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:469 -> [UART, PM25] Reading data...
19:52:44:470 -> [UART, PM25] Data not available.
19:52:44:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:470 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:470 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:490 -> [UART, PM25] Reading data...
19:52:44:491 -> [UART, PM25] Data not available.
19:52:44:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:491 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:491 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:511 -> [UART, PM25] Reading data...
19:52:44:512 -> [UART, PM25] Data not available.
19:52:44:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:512 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:512 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:532 -> [UART, PM25] Reading data...
19:52:44:532 -> [UART, PM25] Data not available.
19:52:44:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:533 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:533 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:556 -> [UART, PM25] Reading data...
19:52:44:557 -> [UART, PM25] Data not available.
19:52:44:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:557 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:557 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:574 -> [UART, PM25] Reading data...
19:52:44:575 -> [UART, PM25] Data not available.
19:52:44:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:575 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:575 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:608 -> [UART, PM25] Reading data...
19:52:44:609 -> [UART, PM25] Data not available.
19:52:44:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:609 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:609 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:617 -> [UART, PM25] Reading data...
19:52:44:617 -> [UART, PM25] Data not available.
19:52:44:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:617 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:617 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:637 -> [UART, PM25] Reading data...
19:52:44:638 -> [UART, PM25] Data not available.
19:52:44:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:638 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:638 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:658 -> [UART, PM25] Reading data...
19:52:44:659 -> [UART, PM25] Data not available.
19:52:44:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:659 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:659 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:679 -> [UART, PM25] Reading data...
19:52:44:679 -> [UART, PM25] Data not available.
19:52:44:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:679 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:679 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:700 -> [UART, PM25] Reading data...
19:52:44:701 -> [UART, PM25] Data not available.
19:52:44:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:701 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:701 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:722 -> [UART, PM25] Reading data...
19:52:44:722 -> [UART, PM25] Data not available.
19:52:44:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:722 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:722 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:743 -> [UART, PM25] Reading data...
19:52:44:743 -> [UART, PM25] Data not available.
19:52:44:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:743 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:743 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:763 -> [UART, PM25] Reading data...
19:52:44:764 -> [UART, PM25] Data not available.
19:52:44:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:764 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:764 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:784 -> [UART, PM25] Reading data...
19:52:44:785 -> [UART, PM25] Data not available.
19:52:44:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:785 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:785 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:805 -> [UART, PM25] Reading data...
19:52:44:806 -> [UART, PM25] Data not available.
19:52:44:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:806 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:806 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:826 -> [UART, PM25] Reading data...
19:52:44:827 -> [UART, PM25] Data not available.
19:52:44:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:827 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:827 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:847 -> [UART, PM25] Reading data...
19:52:44:848 -> [UART, PM25] Data not available.
19:52:44:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:848 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:848 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:868 -> [UART, PM25] Reading data...
19:52:44:869 -> [UART, PM25] Data not available.
19:52:44:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:869 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:869 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:889 -> [UART, PM25] Reading data...
19:52:44:890 -> [UART, PM25] Data not available.
19:52:44:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:890 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:890 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:910 -> [UART, PM25] Reading data...
19:52:44:911 -> [UART, PM25] Data not available.
19:52:44:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:911 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:911 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:931 -> [UART, PM25] Reading data...
19:52:44:932 -> [UART, PM25] Data not available.
19:52:44:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:932 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:932 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:952 -> [UART, PM25] Reading data...
19:52:44:953 -> [UART, PM25] Data not available.
19:52:44:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:953 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:953 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:973 -> [UART, PM25] Reading data...
19:52:44:974 -> [UART, PM25] Data not available.
19:52:44:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:974 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:974 -> [UART, PM25] Uart available, resetting event queue..
19:52:44:994 -> [UART, PM25] Reading data...
19:52:44:995 -> [UART, PM25] Data not available.
19:52:44:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:44:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:44:995 -> [UART, PM25] Uart available, clearing write errors..
19:52:44:995 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:015 -> [UART, PM25] Reading data...
19:52:45:016 -> [UART, PM25] Data not available.
19:52:45:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:016 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:016 -> [UART, PM25] Uart available, resetting event queue..

19:52:45:037 -> [UART, PM25] Data not available.
19:52:45:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:037 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:037 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:057 -> [UART, PM25] Reading data...19:52:45:036 -> [UART, PM25] Reading data...
19:52:45:058 -> [UART, PM25] Data not available.
19:52:45:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:058 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:058 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:078 -> [UART, PM25] Reading data...
19:52:45:079 -> [UART, PM25] Data not available.
19:52:45:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:079 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:079 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:099 -> [UART, PM25] Reading data...
19:52:45:100 -> [UART, PM25] Data not available.
19:52:45:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:100 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:100 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:135 -> [UART, PM25] Reading data...
19:52:45:137 -> [UART, PM25] Data not available.
19:52:45:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:137 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:137 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:141 -> [UART, PM25] Reading data...
19:52:45:142 -> [UART, PM25] Data not available.
19:52:45:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:142 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:142 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:162 -> [UART, PM25] Reading data...
19:52:45:163 -> [UART, PM25] Data not available.
19:52:45:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:163 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:163 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:183 -> [UART, PM25] Reading data...
19:52:45:184 -> [UART, PM25] Data not available.
19:52:45:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:184 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:184 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:204 -> [UART, PM25] Reading data...
19:52:45:205 -> [UART, PM25] Data not available.
19:52:45:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:205 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:205 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:225 -> [UART, PM25] Reading data...
19:52:45:226 -> [UART, PM25] Data not available.
19:52:45:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:226 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:226 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:246 -> [UART, PM25] Reading data...
19:52:45:247 -> [UART, PM25] Data not available.
19:52:45:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:247 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:247 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:294 -> [UART, PM25] Reading data...
19:52:45:295 -> [UART, PM25] Data not available.
19:52:45:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:295 -> [UART, PM25] Reading data...
19:52:45:295 -> [UART, PM25] Data not available.
19:52:45:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:309 -> [UART, PM25] Reading data...
19:52:45:310 -> [UART, PM25] Data not available.
19:52:45:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:310 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:310 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:330 -> [UART, PM25] Reading data...
19:52:45:330 -> [UART, PM25] Data not available.
19:52:45:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:330 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:330 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:351 -> [UART, PM25] Reading data...
19:52:45:352 -> [UART, PM25] Data not available.
19:52:45:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:352 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:352 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:372 -> [UART, PM25] Reading data...
19:52:45:373 -> [UART, PM25] Data not available.
19:52:45:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:373 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:373 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:393 -> [UART, PM25] Reading data...
19:52:45:393 -> [UART, PM25] Data not available.
19:52:45:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:393 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:393 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:414 -> [UART, PM25] Reading data...
19:52:45:415 -> [UART, PM25] Data not available.
19:52:45:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:415 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:415 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:438 -> [UART, PM25] Reading data...
19:52:45:439 -> [UART, PM25] Data not available.
19:52:45:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:439 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:439 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:456 -> [UART, PM25] Reading data...
19:52:45:457 -> [UART, PM25] Data not available.
19:52:45:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:457 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:457 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:477 -> [UART, PM25] Reading data...
19:52:45:478 -> [UART, PM25] Data not available.
19:52:45:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:478 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:478 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:498 -> [UART, PM25] Reading data...
19:52:45:498 -> [UART, PM25] Data not available.
19:52:45:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:499 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:499 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:519 -> [UART, PM25] Reading data...
19:52:45:520 -> [UART, PM25] Data not available.
19:52:45:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:520 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:520 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:540 -> [UART, PM25] Reading data...
19:52:45:541 -> [UART, PM25] Data not available.
19:52:45:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:541 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:541 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:561 -> [UART, PM25] Reading data...
19:52:45:562 -> [UART, PM25] Data not available.
19:52:45:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:562 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:562 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:582 -> [UART, PM25] Reading data...
19:52:45:583 -> [UART, PM25] Data not available.
19:52:45:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:583 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:583 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:603 -> [UART, PM25] Reading data...
19:52:45:604 -> [UART, PM25] Data not available.
19:52:45:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:604 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:604 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:624 -> [UART, PM25] Reading data...
19:52:45:625 -> [UART, PM25] Data not available.
19:52:45:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:625 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:625 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:649 -> [UART, PM25] Reading data...
19:52:45:650 -> [UART, PM25] Data not available.
19:52:45:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:650 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:650 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:667 -> [UART, PM25] Reading data...
19:52:45:669 -> [UART, PM25] Data not available.
19:52:45:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:669 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:669 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:687 -> [UART, PM25] Reading data...
19:52:45:687 -> [UART, PM25] Data not available.
19:52:45:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:687 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:687 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:708 -> [UART, PM25] Reading data...
19:52:45:709 -> [UART, PM25] Data not available.
19:52:45:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:709 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:709 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:729 -> [UART, PM25] Reading data...
19:52:45:730 -> [UART, PM25] Data not available.
19:52:45:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:730 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:730 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:750 -> [UART, PM25] Reading data...
19:52:45:751 -> [UART, PM25] Data not available.
19:52:45:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:751 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:751 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:771 -> [UART, PM25] Reading data...
19:52:45:772 -> [UART, PM25] Data not available.
19:52:45:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:772 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:772 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:792 -> [UART, PM25] Reading data...
19:52:45:793 -> [UART, PM25] Data not available.
19:52:45:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:793 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:793 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:813 -> [UART, PM25] Reading data...
19:52:45:814 -> [UART, PM25] Data not available.
19:52:45:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:814 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:814 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:834 -> [UART, PM25] Reading data...
19:52:45:835 -> [UART, PM25] Data not available.
19:52:45:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:858 -> [UART, PM25] Reading data...
19:52:45:858 -> [UART, PM25] Data not available.
19:52:45:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:876 -> [UART, PM25] Reading data...
19:52:45:877 -> [UART, PM25] Data not available.
19:52:45:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:877 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:877 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:897 -> [UART, PM25] Reading data...
19:52:45:898 -> [UART, PM25] Data not available.
19:52:45:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:898 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:898 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:918 -> [UART, PM25] Reading data...
19:52:45:918 -> [UART, PM25] Data not available.
19:52:45:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:919 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:919 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:939 -> [UART, PM25] Reading data...
19:52:45:940 -> [UART, PM25] Data not available.
19:52:45:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:940 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:940 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:960 -> [UART, PM25] Reading data...
19:52:45:961 -> [UART, PM25] Data not available.
19:52:45:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:961 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:961 -> [UART, PM25] Uart available, resetting event queue..
19:52:45:981 -> [UART, PM25] Reading data...
19:52:45:981 -> [UART, PM25] Data not available.
19:52:45:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:45:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:45:981 -> [UART, PM25] Uart available, clearing write errors..
19:52:45:981 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:003 -> [UART, PM25] Reading data...
19:52:46:003 -> [UART, PM25] Data not available.
19:52:46:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:003 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:003 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:023 -> [UART, PM25] Reading data...
19:52:46:024 -> [UART, PM25] Data not available.
19:52:46:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:024 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:024 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:044 -> [UART, PM25] Reading data...
19:52:46:044 -> [UART, PM25] Data not available.
19:52:46:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:044 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:044 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:065 -> [UART, PM25] Reading data...
19:52:46:066 -> [UART, PM25] Data not available.
19:52:46:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:066 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:066 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:086 -> [UART, PM25] Reading data...
19:52:46:086 -> [UART, PM25] Data not available.
19:52:46:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:087 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:087 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:107 -> [UART, PM25] Reading data...
19:52:46:108 -> [UART, PM25] Data not available.
19:52:46:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:108 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:108 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:128 -> [UART, PM25] Reading data...
19:52:46:129 -> [UART, PM25] Data not available.
19:52:46:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:129 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:129 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:162 -> [UART, PM25] Reading data...
19:52:46:163 -> [UART, PM25] Data not available.
19:52:46:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:163 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:163 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:170 -> [UART, PM25] Reading data...
19:52:46:171 -> [UART, PM25] Data not available.
19:52:46:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:171 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:171 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:191 -> [UART, PM25] Reading data...
19:52:46:192 -> [UART, PM25] Data not available.
19:52:46:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:192 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:192 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:212 -> [UART, PM25] Reading data...
19:52:46:213 -> [UART, PM25] Data not available.
19:52:46:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:213 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:213 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:234 -> [UART, PM25] Reading data...
19:52:46:234 -> [UART, PM25] Data not available.
19:52:46:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:234 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:234 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:254 -> [UART, PM25] Reading data...
19:52:46:255 -> [UART, PM25] Data not available.
19:52:46:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:255 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:255 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:275 -> [UART, PM25] Reading data...
19:52:46:276 -> [UART, PM25] Data not available.
19:52:46:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:276 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:276 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:296 -> [UART, PM25] Reading data...
19:52:46:296 -> [UART, PM25] Data not available.
19:52:46:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:297 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:297 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:317 -> [UART, PM25] Reading data...
19:52:46:318 -> [UART, PM25] Data not available.
19:52:46:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:318 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:318 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:338 -> [UART, PM25] Reading data...
19:52:46:340 -> [UART, PM25] Data not available.
19:52:46:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:340 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:340 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:359 -> [UART, PM25] Reading data...
19:52:46:360 -> [UART, PM25] Data not available.
19:52:46:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:360 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:360 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:380 -> [UART, PM25] Reading data...
19:52:46:381 -> [UART, PM25] Data not available.
19:52:46:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:381 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:381 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:401 -> [UART, PM25] Reading data...
19:52:46:401 -> [UART, PM25] Data not available.
19:52:46:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:402 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:402 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:422 -> [UART, PM25] Reading data...
19:52:46:423 -> [UART, PM25] Data not available.
19:52:46:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:423 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:423 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:443 -> [UART, PM25] Reading data...
19:52:46:444 -> [UART, PM25] Data not available.
19:52:46:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:444 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:444 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:464 -> [UART, PM25] Reading data...
19:52:46:465 -> [UART, PM25] Data not available.
19:52:46:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:465 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:465 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:485 -> [UART, PM25] Reading data...
19:52:46:486 -> [UART, PM25] Data not available.
19:52:46:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:486 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:486 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:506 -> [UART, PM25] Reading data...
19:52:46:507 -> [UART, PM25] Data not available.
19:52:46:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:507 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:507 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:527 -> [UART, PM25] Reading data...
19:52:46:528 -> [UART, PM25] Data not available.
19:52:46:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:528 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:528 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:548 -> [UART, PM25] Reading data...
19:52:46:549 -> [UART, PM25] Data not available.
19:52:46:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:549 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:549 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:569 -> [UART, PM25] Reading data...
19:52:46:569 -> [UART, PM25] Data not available.
19:52:46:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:570 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:570 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:590 -> [UART, PM25] Reading data...
19:52:46:591 -> [UART, PM25] Data not available.
19:52:46:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:591 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:591 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:611 -> [UART, PM25] Reading data...
19:52:46:612 -> [UART, PM25] Data not available.
19:52:46:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:612 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:612 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:632 -> [UART, PM25] Reading data...
19:52:46:633 -> [UART, PM25] Data not available.
19:52:46:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:633 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:633 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:653 -> [UART, PM25] Reading data...
19:52:46:654 -> [UART, PM25] Data not available.
19:52:46:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:654 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:654 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:683 -> [UART, PM25] Reading data...
19:52:46:683 -> [UART, PM25] Data not available.
19:52:46:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:683 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:683 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:695 -> [UART, PM25] Reading data...
19:52:46:695 -> [UART, PM25] Data not available.
19:52:46:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:696 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:696 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:716 -> [UART, PM25] Reading data...
19:52:46:717 -> [UART, PM25] Data not available.
19:52:46:717 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:717 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:717 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:717 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:737 -> [UART, PM25] Reading data...
19:52:46:738 -> [UART, PM25] Data not available.
19:52:46:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:738 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:738 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:758 -> [UART, PM25] Reading data...
19:52:46:758 -> [UART, PM25] Data not available.
19:52:46:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:759 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:759 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:780 -> [UART, PM25] Reading data...
19:52:46:780 -> [UART, PM25] Data not available.
19:52:46:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:780 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:780 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:800 -> [UART, PM25] Reading data...
19:52:46:800 -> [UART, PM25] Data not available.
19:52:46:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:800 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:800 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:821 -> [UART, PM25] Reading data...
19:52:46:822 -> [UART, PM25] Data not available.
19:52:46:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:822 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:822 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:842 -> [UART, PM25] Reading data...
19:52:46:843 -> [UART, PM25] Data not available.
19:52:46:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:843 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:843 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:863 -> [UART, PM25] Reading data...
19:52:46:863 -> [UART, PM25] Data not available.
19:52:46:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:864 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:864 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:885 -> [UART, PM25] Reading data...
19:52:46:885 -> [UART, PM25] Data not available.
19:52:46:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:885 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:885 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:905 -> [UART, PM25] Reading data...
19:52:46:908 -> [UART, PM25] Data not available.
19:52:46:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:908 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:908 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:926 -> [UART, PM25] Reading data...
19:52:46:926 -> [UART, PM25] Data not available.
19:52:46:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:927 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:927 -> [UART, PM25] Uart available, resetting event queue..
19:52:46:947 -> [UART, PM25] Reading data...
19:52:46:948 -> [UART, PM25] Data not available.
19:52:46:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:46:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:46:948 -> [UART, PM25] Uart available, clearing write errors..
19:52:46:948 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:004 -> [UART, PM25] Reading data...
19:52:47:010 -> [UART, PM25] Data not available.
19:52:47:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:010 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:010 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:010 -> [UART, PM25] Reading data...
19:52:47:010 -> [UART, PM25] Data not available.
19:52:47:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:010 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:010 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:016 -> [UART, PM25] Reading data...
19:52:47:016 -> [UART, PM25] Data not available.
19:52:47:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:016 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:016 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:031 -> [UART, PM25] Reading data...
19:52:47:032 -> [UART, PM25] Data not available.
19:52:47:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:032 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:032 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:052 -> [UART, PM25] Reading data...
19:52:47:053 -> [UART, PM25] Data not available.
19:52:47:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:053 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:053 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:073 -> [UART, PM25] Reading data...
19:52:47:074 -> [UART, PM25] Data not available.
19:52:47:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:074 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:074 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:094 -> [UART, PM25] Reading data...
19:52:47:094 -> [UART, PM25] Data not available.
19:52:47:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:095 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:095 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:115 -> [UART, PM25] Reading data...
19:52:47:115 -> [UART, PM25] Data not available.
19:52:47:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:116 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:116 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:136 -> [UART, PM25] Reading data...
19:52:47:137 -> [UART, PM25] Data not available.
19:52:47:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:137 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:137 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:157 -> [UART, PM25] Reading data...
19:52:47:158 -> [UART, PM25] Data not available.
19:52:47:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:158 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:158 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:178 -> [UART, PM25] Reading data...
19:52:47:179 -> [UART, PM25] Data not available.
19:52:47:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:179 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:179 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:204 -> [UART, PM25] Reading data...
19:52:47:206 -> [UART, PM25] Data not available.
19:52:47:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:206 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:206 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:221 -> [UART, PM25] Reading data...
19:52:47:221 -> [UART, PM25] Data not available.
19:52:47:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:221 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:221 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:241 -> [UART, PM25] Reading data...
19:52:47:241 -> [UART, PM25] Data not available.
19:52:47:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:242 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:242 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:263 -> [UART, PM25] Reading data...
19:52:47:264 -> [UART, PM25] Data not available.
19:52:47:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:264 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:264 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:283 -> [UART, PM25] Reading data...
19:52:47:284 -> [UART, PM25] Data not available.
19:52:47:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:284 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:284 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:304 -> [UART, PM25] Reading data...
19:52:47:305 -> [UART, PM25] Data not available.
19:52:47:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:305 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:305 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:325 -> [UART, PM25] Reading data...
19:52:47:325 -> [UART, PM25] Data not available.
19:52:47:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:326 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:326 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:346 -> [UART, PM25] Reading data...
19:52:47:346 -> [UART, PM25] Data not available.
19:52:47:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:347 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:347 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:367 -> [UART, PM25] Reading data...
19:52:47:367 -> [UART, PM25] Data not available.
19:52:47:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:367 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:367 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:389 -> [UART, PM25] Reading data...
19:52:47:389 -> [UART, PM25] Data not available.
19:52:47:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:389 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:389 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:409 -> [UART, PM25] Reading data...
19:52:47:409 -> [UART, PM25] Data not available.
19:52:47:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:410 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:410 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:430 -> [UART, PM25] Reading data...
19:52:47:431 -> [UART, PM25] Data not available.
19:52:47:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:431 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:431 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:451 -> [UART, PM25] Reading data...
19:52:47:452 -> [UART, PM25] Data not available.
19:52:47:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:452 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:452 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:472 -> [UART, PM25] Reading data...
19:52:47:473 -> [UART, PM25] Data not available.
19:52:47:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:473 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:473 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:493 -> [UART, PM25] Reading data...
19:52:47:494 -> [UART, PM25] Data not available.
19:52:47:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:494 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:494 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:514 -> [UART, PM25] Reading data...
19:52:47:515 -> [UART, PM25] Data not available.
19:52:47:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:515 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:515 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:535 -> [UART, PM25] Reading data...
19:52:47:535 -> [UART, PM25] Data not available.
19:52:47:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:536 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:536 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:556 -> [UART, PM25] Reading data...
19:52:47:557 -> [UART, PM25] Data not available.
19:52:47:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:557 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:557 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:577 -> [UART, PM25] Reading data...
19:52:47:577 -> [UART, PM25] Data not available.
19:52:47:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:578 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:578 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:598 -> [UART, PM25] Reading data...
19:52:47:599 -> [UART, PM25] Data not available.
19:52:47:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:599 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:599 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:620 -> [UART, PM25] Reading data...
19:52:47:621 -> [UART, PM25] Data not available.
19:52:47:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:621 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:621 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:640 -> [UART, PM25] Reading data...
19:52:47:641 -> [UART, PM25] Data not available.
19:52:47:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:641 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:641 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:661 -> [UART, PM25] Reading data...
19:52:47:662 -> [UART, PM25] Data not available.
19:52:47:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:662 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:662 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:682 -> [UART, PM25] Reading data...
19:52:47:683 -> [UART, PM25] Data not available.
19:52:47:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:683 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:683 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:719 -> [UART, PM25] Reading data...
19:52:47:720 -> [UART, PM25] Data not available.
19:52:47:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:720 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:720 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:724 -> [UART, PM25] Reading data...
19:52:47:724 -> [UART, PM25] Data not available.
19:52:47:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:725 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:725 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:745 -> [UART, PM25] Reading data...
19:52:47:746 -> [UART, PM25] Data not available.
19:52:47:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:746 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:746 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:766 -> [UART, PM25] Reading data...
19:52:47:766 -> [UART, PM25] Data not available.
19:52:47:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:767 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:767 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:787 -> [UART, PM25] Reading data...
19:52:47:787 -> [UART, PM25] Data not available.
19:52:47:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:788 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:788 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:808 -> [UART, PM25] Reading data...
19:52:47:809 -> [UART, PM25] Data not available.
19:52:47:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:809 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:809 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:829 -> [UART, PM25] Reading data...
19:52:47:830 -> [UART, PM25] Data not available.
19:52:47:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:830 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:830 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:850 -> [UART, PM25] Reading data...
19:52:47:851 -> [UART, PM25] Data not available.
19:52:47:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:851 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:851 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:871 -> [UART, PM25] Reading data...
19:52:47:871 -> [UART, PM25] Data not available.
19:52:47:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:872 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:872 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:892 -> [UART, PM25] Reading data...
19:52:47:893 -> [UART, PM25] Data not available.
19:52:47:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:893 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:893 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:913 -> [UART, PM25] Reading data...
19:52:47:915 -> [UART, PM25] Data not available.
19:52:47:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:915 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:915 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:934 -> [UART, PM25] Reading data...
19:52:47:935 -> [UART, PM25] Data not available.
19:52:47:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:935 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:935 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:955 -> [UART, PM25] Reading data...
19:52:47:956 -> [UART, PM25] Data not available.
19:52:47:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:956 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:956 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:976 -> [UART, PM25] Reading data...
19:52:47:977 -> [UART, PM25] Data not available.
19:52:47:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:977 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:977 -> [UART, PM25] Uart available, resetting event queue..
19:52:47:997 -> [UART, PM25] Reading data...
19:52:47:997 -> [UART, PM25] Data not available.
19:52:47:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:47:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:47:998 -> [UART, PM25] Uart available, clearing write errors..
19:52:47:998 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:018 -> [UART, PM25] Reading data...
19:52:48:019 -> [UART, PM25] Data not available.
19:52:48:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:019 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:019 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:039 -> [UART, PM25] Reading data...
19:52:48:040 -> [UART, PM25] Data not available.
19:52:48:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:040 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:040 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:060 -> [UART, PM25] Reading data...
19:52:48:061 -> [UART, PM25] Data not available.
19:52:48:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:061 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:061 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:081 -> [UART, PM25] Reading data...
19:52:48:082 -> [UART, PM25] Data not available.
19:52:48:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:082 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:082 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:102 -> [UART, PM25] Reading data...
19:52:48:103 -> [UART, PM25] Data not available.
19:52:48:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:103 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:103 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:123 -> [UART, PM25] Reading data...
19:52:48:125 -> [UART, PM25] Data not available.
19:52:48:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:125 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:125 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:144 -> [UART, PM25] Reading data...
19:52:48:144 -> [UART, PM25] Data not available.
19:52:48:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:144 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:144 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:166 -> [UART, PM25] Reading data...
19:52:48:166 -> [UART, PM25] Data not available.
19:52:48:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:166 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:166 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:186 -> [UART, PM25] Reading data...
19:52:48:187 -> [UART, PM25] Data not available.
19:52:48:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:187 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:187 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:207 -> [UART, PM25] Reading data...
19:52:48:208 -> [UART, PM25] Data not available.
19:52:48:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:208 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:208 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:235 -> [UART, PM25] Reading data...
19:52:48:235 -> [UART, PM25] Data not available.
19:52:48:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:235 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:235 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:249 -> [UART, PM25] Reading data...
19:52:48:250 -> [UART, PM25] Data not available.
19:52:48:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:250 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:250 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:270 -> [UART, PM25] Reading data...
19:52:48:271 -> [UART, PM25] Data not available.
19:52:48:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:271 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:271 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:291 -> [UART, PM25] Reading data...
19:52:48:292 -> [UART, PM25] Data not available.
19:52:48:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:292 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:292 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:312 -> [UART, PM25] Reading data...
19:52:48:313 -> [UART, PM25] Data not available.
19:52:48:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:313 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:313 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:333 -> [UART, PM25] Reading data...
19:52:48:334 -> [UART, PM25] Data not available.
19:52:48:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:334 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:334 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:354 -> [UART, PM25] Reading data...
19:52:48:354 -> [UART, PM25] Data not available.
19:52:48:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:355 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:355 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:375 -> [UART, PM25] Reading data...
19:52:48:375 -> [UART, PM25] Data not available.
19:52:48:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:376 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:376 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:396 -> [UART, PM25] Reading data...
19:52:48:396 -> [UART, PM25] Data not available.
19:52:48:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:396 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:396 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:417 -> [UART, PM25] Reading data...
19:52:48:418 -> [UART, PM25] Data not available.
19:52:48:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:418 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:418 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:438 -> [UART, PM25] Reading data...
19:52:48:438 -> [UART, PM25] Data not available.
19:52:48:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:439 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:439 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:459 -> [UART, PM25] Reading data...
19:52:48:459 -> [UART, PM25] Data not available.
19:52:48:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:460 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:460 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:480 -> [UART, PM25] Reading data...
19:52:48:480 -> [UART, PM25] Data not available.
19:52:48:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:481 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:481 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:501 -> [UART, PM25] Reading data...
19:52:48:502 -> [UART, PM25] Data not available.
19:52:48:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:502 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:502 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:522 -> [UART, PM25] Reading data...
19:52:48:523 -> [UART, PM25] Data not available.
19:52:48:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:523 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:523 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:543 -> [UART, PM25] Reading data...
19:52:48:544 -> [UART, PM25] Data not available.
19:52:48:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:544 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:544 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:564 -> [UART, PM25] Reading data...
19:52:48:565 -> [UART, PM25] Data not available.
19:52:48:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:565 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:565 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:585 -> [UART, PM25] Reading data...
19:52:48:585 -> [UART, PM25] Data not available.
19:52:48:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:586 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:586 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:606 -> [UART, PM25] Reading data...
19:52:48:607 -> [UART, PM25] Data not available.
19:52:48:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:607 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:607 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:627 -> [UART, PM25] Reading data...
19:52:48:628 -> [UART, PM25] Data not available.
19:52:48:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:628 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:628 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:628 -> PING!
19:52:48:851 -> [UART, PM25] Reading data...
19:52:48:854 -> [UART, PM25] Data not available.
19:52:48:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:872 -> [UART, PM25] Reading data...
19:52:48:873 -> [UART, PM25] Data not available.
19:52:48:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:873 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:873 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:893 -> [UART, PM25] Reading data...
19:52:48:894 -> [UART, PM25] Data not available.
19:52:48:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:894 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:894 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:914 -> [UART, PM25] Reading data...
19:52:48:915 -> [UART, PM25] Data not available.
19:52:48:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:915 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:915 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:935 -> [UART, PM25] Reading data...
19:52:48:935 -> [UART, PM25] Data not available.
19:52:48:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:936 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:936 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:956 -> [UART, PM25] Reading data...
19:52:48:957 -> [UART, PM25] Data not available.
19:52:48:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:957 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:957 -> [UART, PM25] Uart available, resetting event queue..
19:52:48:977 -> [UART, PM25] Reading data...
19:52:48:977 -> [UART, PM25] Data not available.
19:52:48:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:48:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:48:978 -> [UART, PM25] Uart available, clearing write errors..
19:52:48:978 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:022 -> [UART, PM25] Reading data...
19:52:49:033 -> [UART, PM25] Data not available.
19:52:49:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:033 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:033 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:033 -> [UART, PM25] Reading data...
19:52:49:033 -> [UART, PM25] Data not available.
19:52:49:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:033 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:033 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:040 -> [UART, PM25] Reading data...
19:52:49:041 -> [UART, PM25] Data not available.
19:52:49:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:041 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:041 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:061 -> [UART, PM25] Reading data...
19:52:49:062 -> [UART, PM25] Data not available.
19:52:49:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:062 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:062 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:082 -> [UART, PM25] Reading data...
19:52:49:082 -> [UART, PM25] Data not available.
19:52:49:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:083 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:083 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:103 -> [UART, PM25] Reading data...
19:52:49:103 -> [UART, PM25] Data not available.
19:52:49:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:104 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:104 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:124 -> [UART, PM25] Reading data...
19:52:49:124 -> [UART, PM25] Data not available.
19:52:49:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:125 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:125 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:145 -> [UART, PM25] Reading data...
19:52:49:145 -> [UART, PM25] Data not available.
19:52:49:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:146 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:146 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:166 -> [UART, PM25] Reading data...
19:52:49:166 -> [UART, PM25] Data not available.
19:52:49:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:167 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:167 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:187 -> [UART, PM25] Reading data...
19:52:49:188 -> [UART, PM25] Data not available.
19:52:49:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:188 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:188 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:208 -> [UART, PM25] Reading data...
19:52:49:208 -> [UART, PM25] Data not available.
19:52:49:209 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:209 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:209 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:209 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:229 -> [UART, PM25] Reading data...
19:52:49:230 -> [UART, PM25] Data not available.
19:52:49:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:230 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:230 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:262 -> [UART, PM25] Reading data...
19:52:49:263 -> [UART, PM25] Data not available.
19:52:49:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:263 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:263 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:271 -> [UART, PM25] Reading data...
19:52:49:272 -> [UART, PM25] Data not available.
19:52:49:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:272 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:272 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:292 -> [UART, PM25] Reading data...
19:52:49:292 -> [UART, PM25] Data not available.
19:52:49:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:293 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:293 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:313 -> [UART, PM25] Reading data...
19:52:49:313 -> [UART, PM25] Data not available.
19:52:49:314 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:314 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:314 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:314 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:334 -> [UART, PM25] Reading data...
19:52:49:334 -> [UART, PM25] Data not available.
19:52:49:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:335 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:335 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:355 -> [UART, PM25] Reading data...
19:52:49:356 -> [UART, PM25] Data not available.
19:52:49:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:356 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:356 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:376 -> [UART, PM25] Reading data...
19:52:49:377 -> [UART, PM25] Data not available.
19:52:49:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:377 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:377 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:397 -> [UART, PM25] Reading data...
19:52:49:399 -> [UART, PM25] Data not available.
19:52:49:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:399 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:399 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:418 -> [UART, PM25] Reading data...
19:52:49:418 -> [UART, PM25] Data not available.
19:52:49:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:419 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:419 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:439 -> [UART, PM25] Reading data...
19:52:49:439 -> [UART, PM25] Data not available.
19:52:49:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:440 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:440 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:460 -> [UART, PM25] Reading data...
19:52:49:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:482 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:482 -> [UART, PM25] Uart available, resetting event queue..

19:52:49:461 -> [UART, PM25] Data not available.
19:52:49:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:461 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:461 -> [UART, PM25] Uart available, resetting event queue..

19:52:49:482 -> [UART, PM25] Data not available.19:52:49:481 -> [UART, PM25] Reading data...19:52:49:502 -> [UART, PM25] Reading data...
19:52:49:503 -> [UART, PM25] Data not available.
19:52:49:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:503 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:503 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:523 -> [UART, PM25] Reading data...
19:52:49:523 -> [UART, PM25] Data not available.
19:52:49:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:524 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:524 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:545 -> [UART, PM25] Reading data...
19:52:49:545 -> [UART, PM25] Data not available.
19:52:49:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:545 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:545 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:565 -> [UART, PM25] Reading data...
19:52:49:566 -> [UART, PM25] Data not available.
19:52:49:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:566 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:566 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:586 -> [UART, PM25] Reading data...
19:52:49:586 -> [UART, PM25] Data not available.
19:52:49:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:587 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:587 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:607 -> [UART, PM25] Reading data...
19:52:49:608 -> [UART, PM25] Data not available.
19:52:49:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:608 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:608 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:628 -> [UART, PM25] Reading data...
19:52:49:628 -> [UART, PM25] Data not available.
19:52:49:629 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:629 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:629 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:629 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:650 -> [UART, PM25] Reading data...
19:52:49:650 -> [UART, PM25] Data not available.
19:52:49:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:650 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:650 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:670 -> [UART, PM25] Reading data...
19:52:49:671 -> [UART, PM25] Data not available.
19:52:49:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:671 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:671 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:691 -> [UART, PM25] Reading data...
19:52:49:691 -> [UART, PM25] Data not available.
19:52:49:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:692 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:692 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:712 -> [UART, PM25] Reading data...
19:52:49:713 -> [UART, PM25] Data not available.
19:52:49:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:713 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:713 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:733 -> [UART, PM25] Reading data...
19:52:49:733 -> [UART, PM25] Data not available.
19:52:49:734 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:734 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:734 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:734 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:755 -> [UART, PM25] Reading data...
19:52:49:755 -> [UART, PM25] Data not available.
19:52:49:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:755 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:755 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:776 -> [UART, PM25] Reading data...
19:52:49:777 -> [UART, PM25] Data not available.
19:52:49:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:777 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:777 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:796 -> [UART, PM25] Reading data...
19:52:49:796 -> [UART, PM25] Data not available.
19:52:49:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:797 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:797 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:817 -> [UART, PM25] Reading data...
19:52:49:818 -> [UART, PM25] Data not available.
19:52:49:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:818 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:818 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:838 -> [UART, PM25] Reading data...
19:52:49:839 -> [UART, PM25] Data not available.
19:52:49:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:839 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:839 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:859 -> [UART, PM25] Reading data...
19:52:49:859 -> [UART, PM25] Data not available.
19:52:49:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:860 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:860 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:880 -> [UART, PM25] Reading data...
19:52:49:881 -> [UART, PM25] Data not available.
19:52:49:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:881 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:881 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:901 -> [UART, PM25] Reading data...
19:52:49:902 -> [UART, PM25] Data not available.
19:52:49:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:902 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:902 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:922 -> [UART, PM25] Reading data...
19:52:49:923 -> [UART, PM25] Data not available.
19:52:49:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:923 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:923 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:943 -> [UART, PM25] Reading data...
19:52:49:944 -> [UART, PM25] Data not available.
19:52:49:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:944 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:944 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:964 -> [UART, PM25] Reading data...
19:52:49:965 -> [UART, PM25] Data not available.
19:52:49:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:965 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:965 -> [UART, PM25] Uart available, resetting event queue..
19:52:49:987 -> [UART, PM25] Reading data...
19:52:49:988 -> [UART, PM25] Data not available.
19:52:49:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:49:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:49:988 -> [UART, PM25] Uart available, clearing write errors..
19:52:49:988 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:006 -> [UART, PM25] Reading data...
19:52:50:007 -> [UART, PM25] Data not available.
19:52:50:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:007 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:007 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:027 -> [UART, PM25] Reading data...
19:52:50:027 -> [UART, PM25] Data not available.
19:52:50:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:028 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:028 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:049 -> [UART, PM25] Reading data...
19:52:50:049 -> [UART, PM25] Data not available.
19:52:50:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:049 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:049 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:069 -> [UART, PM25] Reading data...
19:52:50:069 -> [UART, PM25] Data not available.
19:52:50:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:070 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:070 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:090 -> [UART, PM25] Reading data...
19:52:50:091 -> [UART, PM25] Data not available.
19:52:50:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:091 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:091 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:111 -> [UART, PM25] Reading data...
19:52:50:112 -> [UART, PM25] Data not available.
19:52:50:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:112 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:112 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:132 -> [UART, PM25] Reading data...
19:52:50:133 -> [UART, PM25] Data not available.
19:52:50:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:133 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:133 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:154 -> [UART, PM25] Reading data...
19:52:50:154 -> [UART, PM25] Data not available.
19:52:50:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:154 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:154 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:174 -> [UART, PM25] Reading data...
19:52:50:175 -> [UART, PM25] Data not available.
19:52:50:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:175 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:175 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:195 -> [UART, PM25] Reading data...
19:52:50:196 -> [UART, PM25] Data not available.
19:52:50:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:196 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:196 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:216 -> [UART, PM25] Reading data...
19:52:50:217 -> [UART, PM25] Data not available.
19:52:50:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:217 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:217 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:237 -> [UART, PM25] Reading data...
19:52:50:237 -> [UART, PM25] Data not available.
19:52:50:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:238 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:238 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:258 -> [UART, PM25] Reading data...
19:52:50:258 -> [UART, PM25] Data not available.
19:52:50:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:259 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:259 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:292 -> [UART, PM25] Reading data...
19:52:50:293 -> [UART, PM25] Data not available.
19:52:50:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:293 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:293 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:300 -> [UART, PM25] Reading data...
19:52:50:301 -> [UART, PM25] Data not available.
19:52:50:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:301 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:301 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:321 -> [UART, PM25] Reading data...
19:52:50:322 -> [UART, PM25] Data not available.
19:52:50:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:322 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:322 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:342 -> [UART, PM25] Reading data...
19:52:50:343 -> [UART, PM25] Data not available.
19:52:50:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:343 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:343 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:363 -> [UART, PM25] Reading data...
19:52:50:364 -> [UART, PM25] Data not available.
19:52:50:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:364 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:364 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:384 -> [UART, PM25] Reading data...
19:52:50:385 -> [UART, PM25] Data not available.
19:52:50:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:385 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:385 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:405 -> [UART, PM25] Reading data...
19:52:50:406 -> [UART, PM25] Data not available.
19:52:50:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:406 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:406 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:426 -> [UART, PM25] Reading data...
19:52:50:426 -> [UART, PM25] Data not available.
19:52:50:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:427 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:427 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:447 -> [UART, PM25] Reading data...
19:52:50:447 -> [UART, PM25] Data not available.
19:52:50:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:447 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:447 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:468 -> [UART, PM25] Reading data...
19:52:50:469 -> [UART, PM25] Data not available.
19:52:50:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:469 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:469 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:489 -> [UART, PM25] Reading data...
19:52:50:490 -> [UART, PM25] Data not available.
19:52:50:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:490 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:490 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:510 -> [UART, PM25] Reading data...
19:52:50:510 -> [UART, PM25] Data not available.
19:52:50:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:511 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:511 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:531 -> [UART, PM25] Reading data...
19:52:50:532 -> [UART, PM25] Data not available.
19:52:50:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:532 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:532 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:552 -> [UART, PM25] Reading data...
19:52:50:552 -> [UART, PM25] Data not available.
19:52:50:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:552 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:552 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:573 -> [UART, PM25] Reading data...
19:52:50:573 -> [UART, PM25] Data not available.
19:52:50:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:574 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:574 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:594 -> [UART, PM25] Reading data...
19:52:50:594 -> [UART, PM25] Data not available.
19:52:50:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:595 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:595 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:615 -> [UART, PM25] Reading data...
19:52:50:616 -> [UART, PM25] Data not available.
19:52:50:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:616 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:616 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:636 -> [UART, PM25] Reading data...
19:52:50:636 -> [UART, PM25] Data not available.
19:52:50:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:636 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:636 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:657 -> [UART, PM25] Reading data...
19:52:50:658 -> [UART, PM25] Data not available.
19:52:50:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:658 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:658 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:678 -> [UART, PM25] Reading data...
19:52:50:679 -> [UART, PM25] Data not available.
19:52:50:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:679 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:679 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:699 -> [UART, PM25] Reading data...
19:52:50:700 -> [UART, PM25] Data not available.
19:52:50:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:700 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:700 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:720 -> [UART, PM25] Reading data...
19:52:50:721 -> [UART, PM25] Data not available.
19:52:50:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:721 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:721 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:741 -> [UART, PM25] Reading data...
19:52:50:741 -> [UART, PM25] Data not available.
19:52:50:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:742 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:742 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:762 -> [UART, PM25] Reading data...
19:52:50:762 -> [UART, PM25] Data not available.
19:52:50:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:763 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:763 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:783 -> [UART, PM25] Reading data...
19:52:50:783 -> [UART, PM25] Data not available.
19:52:50:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:784 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:784 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:832 -> [UART, PM25] Reading data...
19:52:50:835 -> [UART, PM25] Data not available.
19:52:50:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:835 -> [UART, PM25] Reading data...
19:52:50:835 -> [UART, PM25] Data not available.
19:52:50:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:835 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:835 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:847 -> [UART, PM25] Reading data...
19:52:50:851 -> [UART, PM25] Data not available.
19:52:50:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:851 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:851 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:867 -> [UART, PM25] Reading data...
19:52:50:868 -> [UART, PM25] Data not available.
19:52:50:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:868 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:868 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:888 -> [UART, PM25] Reading data...
19:52:50:888 -> [UART, PM25] Data not available.
19:52:50:889 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:889 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:889 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:889 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:909 -> [UART, PM25] Reading data...
19:52:50:909 -> [UART, PM25] Data not available.
19:52:50:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:909 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:909 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:930 -> [UART, PM25] Reading data...
19:52:50:931 -> [UART, PM25] Data not available.
19:52:50:931 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:931 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:931 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:931 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:951 -> [UART, PM25] Reading data...
19:52:50:952 -> [UART, PM25] Data not available.
19:52:50:952 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:952 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:952 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:952 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:972 -> [UART, PM25] Reading data...
19:52:50:973 -> [UART, PM25] Data not available.
19:52:50:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:973 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:973 -> [UART, PM25] Uart available, resetting event queue..
19:52:50:994 -> [UART, PM25] Reading data...
19:52:50:994 -> [UART, PM25] Data not available.
19:52:50:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:50:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:50:994 -> [UART, PM25] Uart available, clearing write errors..
19:52:50:994 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:014 -> [UART, PM25] Reading data...
19:52:51:015 -> [UART, PM25] Data not available.
19:52:51:015 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:015 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:015 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:015 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:035 -> [UART, PM25] Reading data...
19:52:51:035 -> [UART, PM25] Data not available.
19:52:51:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:036 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:036 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:056 -> [UART, PM25] Reading data...
19:52:51:056 -> [UART, PM25] Data not available.
19:52:51:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:057 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:057 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:077 -> [UART, PM25] Reading data...
19:52:51:077 -> [UART, PM25] Data not available.
19:52:51:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:078 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:078 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:098 -> [UART, PM25] Reading data...
19:52:51:098 -> [UART, PM25] Data not available.
19:52:51:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:099 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:099 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:119 -> [UART, PM25] Reading data...
19:52:51:119 -> [UART, PM25] Data not available.
19:52:51:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:120 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:120 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:140 -> [UART, PM25] Reading data...
19:52:51:141 -> [UART, PM25] Data not available.
19:52:51:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:141 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:141 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:161 -> [UART, PM25] Reading data...
19:52:51:162 -> [UART, PM25] Data not available.
19:52:51:162 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:162 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:162 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:162 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:183 -> [UART, PM25] Reading data...
19:52:51:183 -> [UART, PM25] Data not available.
19:52:51:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:183 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:183 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:203 -> [UART, PM25] Reading data...
19:52:51:204 -> [UART, PM25] Data not available.
19:52:51:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:204 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:204 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:224 -> [UART, PM25] Reading data...
19:52:51:224 -> [UART, PM25] Data not available.
19:52:51:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:225 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:225 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:245 -> [UART, PM25] Reading data...
19:52:51:245 -> [UART, PM25] Data not available.
19:52:51:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:246 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:246 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:266 -> [UART, PM25] Reading data...
19:52:51:267 -> [UART, PM25] Data not available.
19:52:51:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:267 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:267 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:287 -> [UART, PM25] Reading data...
19:52:51:287 -> [UART, PM25] Data not available.
19:52:51:288 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:288 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:288 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:288 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:308 -> [UART, PM25] Reading data...
19:52:51:308 -> [UART, PM25] Data not available.
19:52:51:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:308 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:308 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:329 -> [UART, PM25] Reading data...
19:52:51:330 -> [UART, PM25] Data not available.
19:52:51:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:330 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:330 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:354 -> [UART, PM25] Reading data...
19:52:51:354 -> [UART, PM25] Data not available.
19:52:51:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:354 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:354 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:371 -> [UART, PM25] Reading data...
19:52:51:372 -> [UART, PM25] Data not available.
19:52:51:372 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:372 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:372 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:372 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:392 -> [UART, PM25] Reading data...
19:52:51:393 -> [UART, PM25] Data not available.
19:52:51:393 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:393 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:393 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:393 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:413 -> [UART, PM25] Reading data...
19:52:51:414 -> [UART, PM25] Data not available.
19:52:51:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:414 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:414 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:434 -> [UART, PM25] Reading data...
19:52:51:434 -> [UART, PM25] Data not available.
19:52:51:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:435 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:435 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:455 -> [UART, PM25] Reading data...
19:52:51:456 -> [UART, PM25] Data not available.
19:52:51:456 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:456 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:456 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:456 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:476 -> [UART, PM25] Reading data...
19:52:51:476 -> [UART, PM25] Data not available.
19:52:51:477 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:477 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:477 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:477 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:497 -> [UART, PM25] Reading data...
19:52:51:498 -> [UART, PM25] Data not available.
19:52:51:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:498 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:498 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:518 -> [UART, PM25] Reading data...
19:52:51:518 -> [UART, PM25] Data not available.
19:52:51:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:519 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:519 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:539 -> [UART, PM25] Reading data...
19:52:51:539 -> [UART, PM25] Data not available.
19:52:51:540 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:540 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:540 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:540 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:560 -> [UART, PM25] Reading data...
19:52:51:560 -> [UART, PM25] Data not available.
19:52:51:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:561 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:561 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:581 -> [UART, PM25] Reading data...
19:52:51:581 -> [UART, PM25] Data not available.
19:52:51:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:582 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:582 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:602 -> [UART, PM25] Reading data...
19:52:51:602 -> [UART, PM25] Data not available.
19:52:51:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:603 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:603 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:623 -> [UART, PM25] Reading data...
19:52:51:623 -> [UART, PM25] Data not available.
19:52:51:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:624 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:624 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:644 -> [UART, PM25] Reading data...
19:52:51:645 -> [UART, PM25] Data not available.
19:52:51:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:645 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:645 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:665 -> [UART, PM25] Reading data...
19:52:51:666 -> [UART, PM25] Data not available.
19:52:51:666 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:666 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:666 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:666 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:686 -> [UART, PM25] Reading data...
19:52:51:687 -> [UART, PM25] Data not available.
19:52:51:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:687 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:687 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:707 -> [UART, PM25] Reading data...
19:52:51:708 -> [UART, PM25] Data not available.
19:52:51:708 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:708 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:708 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:708 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:728 -> [UART, PM25] Reading data...
19:52:51:729 -> [UART, PM25] Data not available.
19:52:51:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:729 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:729 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:749 -> [UART, PM25] Reading data...
19:52:51:750 -> [UART, PM25] Data not available.
19:52:51:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:750 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:750 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:770 -> [UART, PM25] Reading data...
19:52:51:771 -> [UART, PM25] Data not available.
19:52:51:771 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:771 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:771 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:771 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:791 -> [UART, PM25] Reading data...
19:52:51:791 -> [UART, PM25] Data not available.
19:52:51:792 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:792 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:792 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:792 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:812 -> [UART, PM25] Reading data...
19:52:51:813 -> [UART, PM25] Data not available.
19:52:51:813 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:813 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:813 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:813 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:833 -> [UART, PM25] Reading data...
19:52:51:834 -> [UART, PM25] Data not available.
19:52:51:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:834 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:834 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:865 -> [UART, PM25] Reading data...
19:52:51:865 -> [UART, PM25] Data not available.
19:52:51:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:867 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:867 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:875 -> [UART, PM25] Reading data...
19:52:51:876 -> [UART, PM25] Data not available.
19:52:51:876 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:876 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:876 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:876 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:896 -> [UART, PM25] Reading data...
19:52:51:897 -> [UART, PM25] Data not available.
19:52:51:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:897 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:897 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:917 -> [UART, PM25] Reading data...
19:52:51:918 -> [UART, PM25] Data not available.
19:52:51:918 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:918 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:918 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:918 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:938 -> [UART, PM25] Reading data...
19:52:51:939 -> [UART, PM25] Data not available.
19:52:51:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:939 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:939 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:959 -> [UART, PM25] Reading data...
19:52:51:960 -> [UART, PM25] Data not available.
19:52:51:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:960 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:960 -> [UART, PM25] Uart available, resetting event queue..
19:52:51:980 -> [UART, PM25] Reading data...
19:52:51:981 -> [UART, PM25] Data not available.
19:52:51:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:51:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:51:981 -> [UART, PM25] Uart available, clearing write errors..
19:52:51:981 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:002 -> [UART, PM25] Reading data...
19:52:52:002 -> [UART, PM25] Data not available.
19:52:52:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:002 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:002 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:022 -> [UART, PM25] Reading data...
19:52:52:023 -> [UART, PM25] Data not available.
19:52:52:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:023 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:023 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:043 -> [UART, PM25] Reading data...
19:52:52:044 -> [UART, PM25] Data not available.
19:52:52:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:044 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:044 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:064 -> [UART, PM25] Reading data...
19:52:52:065 -> [UART, PM25] Data not available.
19:52:52:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:065 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:065 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:085 -> [UART, PM25] Reading data...
19:52:52:086 -> [UART, PM25] Data not available.
19:52:52:086 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:086 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:086 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:086 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:106 -> [UART, PM25] Reading data...
19:52:52:106 -> [UART, PM25] Data not available.
19:52:52:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:107 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:107 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:127 -> [UART, PM25] Reading data...
19:52:52:127 -> [UART, PM25] Data not available.
19:52:52:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:128 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:128 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:148 -> [UART, PM25] Reading data...
19:52:52:149 -> [UART, PM25] Data not available.
19:52:52:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:149 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:149 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:169 -> [UART, PM25] Reading data...
19:52:52:170 -> [UART, PM25] Data not available.
19:52:52:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:170 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:170 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:190 -> [UART, PM25] Reading data...
19:52:52:191 -> [UART, PM25] Data not available.
19:52:52:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:191 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:191 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:211 -> [UART, PM25] Reading data...
19:52:52:211 -> [UART, PM25] Data not available.
19:52:52:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:212 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:212 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:232 -> [UART, PM25] Reading data...
19:52:52:233 -> [UART, PM25] Data not available.
19:52:52:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:233 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:233 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:253 -> [UART, PM25] Reading data...
19:52:52:253 -> [UART, PM25] Data not available.
19:52:52:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:254 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:254 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:274 -> [UART, PM25] Reading data...
19:52:52:274 -> [UART, PM25] Data not available.
19:52:52:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:275 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:275 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:295 -> [UART, PM25] Reading data...
19:52:52:295 -> [UART, PM25] Data not available.
19:52:52:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:296 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:296 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:316 -> [UART, PM25] Reading data...
19:52:52:316 -> [UART, PM25] Data not available.
19:52:52:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:317 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:317 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:337 -> [UART, PM25] Reading data...
19:52:52:338 -> [UART, PM25] Data not available.
19:52:52:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:338 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:338 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:358 -> [UART, PM25] Reading data...
19:52:52:358 -> [UART, PM25] Data not available.
19:52:52:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:359 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:359 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:381 -> [UART, PM25] Reading data...
19:52:52:381 -> [UART, PM25] Data not available.
19:52:52:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:381 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:381 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:400 -> [UART, PM25] Reading data...
19:52:52:401 -> [UART, PM25] Data not available.
19:52:52:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:401 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:401 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:421 -> [UART, PM25] Reading data...
19:52:52:422 -> [UART, PM25] Data not available.
19:52:52:422 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:422 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:422 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:422 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:442 -> [UART, PM25] Reading data...
19:52:52:443 -> [UART, PM25] Data not available.
19:52:52:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:443 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:443 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:463 -> [UART, PM25] Reading data...
19:52:52:464 -> [UART, PM25] Data not available.
19:52:52:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:464 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:464 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:484 -> [UART, PM25] Reading data...
19:52:52:485 -> [UART, PM25] Data not available.
19:52:52:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:485 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:485 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:505 -> [UART, PM25] Reading data...
19:52:52:505 -> [UART, PM25] Data not available.
19:52:52:506 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:506 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:506 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:506 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:527 -> [UART, PM25] Reading data...
19:52:52:527 -> [UART, PM25] Data not available.
19:52:52:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:528 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:528 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:552 -> [UART, PM25] Reading data...
19:52:52:552 -> [UART, PM25] Data not available.
19:52:52:552 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:552 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:552 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:552 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:588 -> [UART, PM25] Reading data...
19:52:52:602 -> [UART, PM25] Data not available.
19:52:52:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:602 -> [UART, PM25] Reading data...
19:52:52:602 -> [UART, PM25] Data not available.
19:52:52:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:610 -> [UART, PM25] Reading data...
19:52:52:611 -> [UART, PM25] Data not available.
19:52:52:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:611 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:611 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:631 -> [UART, PM25] Reading data...
19:52:52:632 -> [UART, PM25] Data not available.
19:52:52:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:632 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:632 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:652 -> [UART, PM25] Reading data...
19:52:52:652 -> [UART, PM25] Data not available.
19:52:52:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:673 -> [UART, PM25] Reading data...
19:52:52:673 -> [UART, PM25] Data not available.
19:52:52:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:673 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:673 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:694 -> [UART, PM25] Reading data...
19:52:52:694 -> [UART, PM25] Data not available.
19:52:52:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:694 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:694 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:716 -> [UART, PM25] Reading data...
19:52:52:716 -> [UART, PM25] Data not available.
19:52:52:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:716 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:716 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:736 -> [UART, PM25] Reading data...
19:52:52:736 -> [UART, PM25] Data not available.
19:52:52:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:757 -> [UART, PM25] Reading data...
19:52:52:757 -> [UART, PM25] Data not available.
19:52:52:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:757 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:757 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:778 -> [UART, PM25] Reading data...
19:52:52:779 -> [UART, PM25] Data not available.
19:52:52:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:779 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:779 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:799 -> [UART, PM25] Reading data...
19:52:52:800 -> [UART, PM25] Data not available.
19:52:52:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:800 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:800 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:820 -> [UART, PM25] Reading data...
19:52:52:821 -> [UART, PM25] Data not available.
19:52:52:821 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:821 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:821 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:821 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:841 -> [UART, PM25] Reading data...
19:52:52:841 -> [UART, PM25] Data not available.
19:52:52:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:842 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:842 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:862 -> [UART, PM25] Reading data...
19:52:52:862 -> [UART, PM25] Data not available.
19:52:52:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:862 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:862 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:896 -> [UART, PM25] Reading data...
19:52:52:897 -> [UART, PM25] Data not available.
19:52:52:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:897 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:897 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:904 -> [UART, PM25] Reading data...
19:52:52:904 -> [UART, PM25] Data not available.
19:52:52:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:905 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:905 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:925 -> [UART, PM25] Reading data...
19:52:52:926 -> [UART, PM25] Data not available.
19:52:52:926 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:926 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:926 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:926 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:946 -> [UART, PM25] Reading data...
19:52:52:946 -> [UART, PM25] Data not available.
19:52:52:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:947 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:947 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:967 -> [UART, PM25] Reading data...
19:52:52:967 -> [UART, PM25] Data not available.
19:52:52:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:52:988 -> [UART, PM25] Reading data...
19:52:52:992 -> [UART, PM25] Data not available.
19:52:52:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:52:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:52:992 -> [UART, PM25] Uart available, clearing write errors..
19:52:52:992 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:009 -> [UART, PM25] Reading data...
19:52:53:009 -> [UART, PM25] Data not available.
19:52:53:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:010 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:010 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:030 -> [UART, PM25] Reading data...
19:52:53:030 -> [UART, PM25] Data not available.
19:52:53:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:031 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:031 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:051 -> [UART, PM25] Reading data...
19:52:53:052 -> [UART, PM25] Data not available.
19:52:53:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:052 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:052 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:072 -> [UART, PM25] Reading data...
19:52:53:072 -> [UART, PM25] Data not available.
19:52:53:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:073 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:073 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:093 -> [UART, PM25] Reading data...
19:52:53:093 -> [UART, PM25] Data not available.
19:52:53:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:094 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:094 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:114 -> [UART, PM25] Reading data...
19:52:53:114 -> [UART, PM25] Data not available.
19:52:53:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:115 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:115 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:136 -> [UART, PM25] Reading data...
19:52:53:136 -> [UART, PM25] Data not available.
19:52:53:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:136 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:136 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:156 -> [UART, PM25] Reading data...
19:52:53:156 -> [UART, PM25] Data not available.
19:52:53:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:157 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:157 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:177 -> [UART, PM25] Reading data...
19:52:53:178 -> [UART, PM25] Data not available.
19:52:53:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:178 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:178 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:198 -> [UART, PM25] Reading data...
19:52:53:199 -> [UART, PM25] Data not available.
19:52:53:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:199 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:199 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:219 -> [UART, PM25] Reading data...
19:52:53:220 -> [UART, PM25] Data not available.
19:52:53:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:220 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:220 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:240 -> [UART, PM25] Reading data...
19:52:53:241 -> [UART, PM25] Data not available.
19:52:53:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:241 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:241 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:261 -> [UART, PM25] Reading data...
19:52:53:262 -> [UART, PM25] Data not available.
19:52:53:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:262 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:262 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:282 -> [UART, PM25] Reading data...
19:52:53:283 -> [UART, PM25] Data not available.
19:52:53:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:283 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:283 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:303 -> [UART, PM25] Reading data...
19:52:53:303 -> [UART, PM25] Data not available.
19:52:53:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:304 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:304 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:324 -> [UART, PM25] Reading data...
19:52:53:324 -> [UART, PM25] Data not available.
19:52:53:325 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:325 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:325 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:325 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:345 -> [UART, PM25] Reading data...
19:52:53:345 -> [UART, PM25] Data not available.
19:52:53:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:346 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:346 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:346 -> PING!
19:52:53:559 -> [UART, PM25] Reading data...
19:52:53:559 -> [UART, PM25] Data not available.
19:52:53:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:564 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:564 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:580 -> [UART, PM25] Reading data...
19:52:53:580 -> [UART, PM25] Data not available.
19:52:53:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:581 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:581 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:601 -> [UART, PM25] Reading data...
19:52:53:601 -> [UART, PM25] Data not available.
19:52:53:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:602 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:602 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:622 -> [UART, PM25] Reading data...
19:52:53:623 -> [UART, PM25] Data not available.
19:52:53:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:623 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:623 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:643 -> [UART, PM25] Reading data...
19:52:53:644 -> [UART, PM25] Data not available.
19:52:53:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:644 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:644 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:664 -> [UART, PM25] Reading data...
19:52:53:664 -> [UART, PM25] Data not available.
19:52:53:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:665 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:665 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:685 -> [UART, PM25] Reading data...
19:52:53:685 -> [UART, PM25] Data not available.
19:52:53:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:685 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:685 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:706 -> [UART, PM25] Reading data...
19:52:53:706 -> [UART, PM25] Data not available.
19:52:53:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:707 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:707 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:727 -> [UART, PM25] Reading data...
19:52:53:728 -> [UART, PM25] Data not available.
19:52:53:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:728 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:728 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:748 -> [UART, PM25] Reading data...
19:52:53:748 -> [UART, PM25] Data not available.
19:52:53:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:749 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:749 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:769 -> [UART, PM25] Reading data...
19:52:53:770 -> [UART, PM25] Data not available.
19:52:53:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:770 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:770 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:790 -> [UART, PM25] Reading data...
19:52:53:791 -> [UART, PM25] Data not available.
19:52:53:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:791 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:791 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:811 -> [UART, PM25] Reading data...
19:52:53:811 -> [UART, PM25] Data not available.
19:52:53:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:812 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:812 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:832 -> [UART, PM25] Reading data...
19:52:53:833 -> [UART, PM25] Data not available.
19:52:53:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:833 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:833 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:853 -> [UART, PM25] Reading data...
19:52:53:854 -> [UART, PM25] Data not available.
19:52:53:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:854 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:854 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:874 -> [UART, PM25] Reading data...
19:52:53:875 -> [UART, PM25] Data not available.
19:52:53:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:875 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:875 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:895 -> [UART, PM25] Reading data...
19:52:53:895 -> [UART, PM25] Data not available.
19:52:53:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:896 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:896 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:928 -> [UART, PM25] Reading data...
19:52:53:928 -> [UART, PM25] Data not available.
19:52:53:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:928 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:928 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:937 -> [UART, PM25] Reading data...
19:52:53:938 -> [UART, PM25] Data not available.
19:52:53:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:938 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:938 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:958 -> [UART, PM25] Reading data...
19:52:53:958 -> [UART, PM25] Data not available.
19:52:53:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:958 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:958 -> [UART, PM25] Uart available, resetting event queue..
19:52:53:979 -> [UART, PM25] Reading data...
19:52:53:979 -> [UART, PM25] Data not available.
19:52:53:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:53:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:53:980 -> [UART, PM25] Uart available, clearing write errors..
19:52:53:980 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:000 -> [UART, PM25] Reading data...
19:52:54:000 -> [UART, PM25] Data not available.
19:52:54:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:001 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:001 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:021 -> [UART, PM25] Reading data...
19:52:54:022 -> [UART, PM25] Data not available.
19:52:54:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:022 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:022 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:042 -> [UART, PM25] Reading data...
19:52:54:043 -> [UART, PM25] Data not available.
19:52:54:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:043 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:043 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:063 -> [UART, PM25] Reading data...
19:52:54:064 -> [UART, PM25] Data not available.
19:52:54:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:064 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:064 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:084 -> [UART, PM25] Reading data...
19:52:54:085 -> [UART, PM25] Data not available.
19:52:54:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:085 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:085 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:105 -> [UART, PM25] Reading data...
19:52:54:105 -> [UART, PM25] Data not available.
19:52:54:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:105 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:105 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:126 -> [UART, PM25] Reading data...
19:52:54:127 -> [UART, PM25] Data not available.
19:52:54:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:127 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:127 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:147 -> [UART, PM25] Reading data...
19:52:54:148 -> [UART, PM25] Data not available.
19:52:54:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:148 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:148 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:168 -> [UART, PM25] Reading data...
19:52:54:169 -> [UART, PM25] Data not available.
19:52:54:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:169 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:169 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:189 -> [UART, PM25] Reading data...
19:52:54:190 -> [UART, PM25] Data not available.
19:52:54:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:190 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:190 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:210 -> [UART, PM25] Reading data...
19:52:54:210 -> [UART, PM25] Data not available.
19:52:54:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:211 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:211 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:231 -> [UART, PM25] Reading data...
19:52:54:232 -> [UART, PM25] Data not available.
19:52:54:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:232 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:232 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:252 -> [UART, PM25] Reading data...
19:52:54:252 -> [UART, PM25] Data not available.
19:52:54:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:253 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:253 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:273 -> [UART, PM25] Reading data...
19:52:54:273 -> [UART, PM25] Data not available.
19:52:54:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:274 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:274 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:294 -> [UART, PM25] Reading data...
19:52:54:294 -> [UART, PM25] Data not available.
19:52:54:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:295 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:295 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:315 -> [UART, PM25] Reading data...
19:52:54:315 -> [UART, PM25] Data not available.
19:52:54:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:315 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:315 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:336 -> [UART, PM25] Reading data...
19:52:54:337 -> [UART, PM25] Data not available.
19:52:54:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:337 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:337 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:357 -> [UART, PM25] Reading data...
19:52:54:357 -> [UART, PM25] Data not available.
19:52:54:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:358 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:358 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:378 -> [UART, PM25] Reading data...
19:52:54:378 -> [UART, PM25] Data not available.
19:52:54:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:379 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:379 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:426 -> [UART, PM25] Reading data...
19:52:54:453 -> [UART, PM25] Data not available.
19:52:54:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:453 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:453 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:453 -> [UART, PM25] Reading data...
19:52:54:453 -> [UART, PM25] Data not available.
19:52:54:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:453 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:453 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:453 -> [UART, PM25] Reading data...
19:52:54:453 -> [UART, PM25] Data not available.
19:52:54:453 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:453 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:453 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:453 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:462 -> [UART, PM25] Reading data...
19:52:54:463 -> [UART, PM25] Data not available.
19:52:54:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:463 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:463 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:483 -> [UART, PM25] Reading data...
19:52:54:485 -> [UART, PM25] Data not available.
19:52:54:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:485 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:485 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:504 -> [UART, PM25] Reading data...
19:52:54:504 -> [UART, PM25] Data not available.
19:52:54:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:504 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:504 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:525 -> [UART, PM25] Reading data...
19:52:54:525 -> [UART, PM25] Data not available.
19:52:54:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:526 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:526 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:546 -> [UART, PM25] Reading data...
19:52:54:546 -> [UART, PM25] Data not available.
19:52:54:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:547 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:547 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:567 -> [UART, PM25] Reading data...
19:52:54:567 -> [UART, PM25] Data not available.
19:52:54:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:568 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:568 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:588 -> [UART, PM25] Reading data...
19:52:54:589 -> [UART, PM25] Data not available.
19:52:54:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:589 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:589 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:609 -> [UART, PM25] Reading data...
19:52:54:609 -> [UART, PM25] Data not available.
19:52:54:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:609 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:609 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:630 -> [UART, PM25] Reading data...
19:52:54:630 -> [UART, PM25] Data not available.
19:52:54:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:630 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:630 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:651 -> [UART, PM25] Reading data...
19:52:54:652 -> [UART, PM25] Data not available.
19:52:54:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:652 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:652 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:672 -> [UART, PM25] Reading data...
19:52:54:673 -> [UART, PM25] Data not available.
19:52:54:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:673 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:673 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:693 -> [UART, PM25] Reading data...
19:52:54:693 -> [UART, PM25] Data not available.
19:52:54:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:693 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:693 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:714 -> [UART, PM25] Reading data...
19:52:54:714 -> [UART, PM25] Data not available.
19:52:54:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:715 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:715 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:735 -> [UART, PM25] Reading data...
19:52:54:735 -> [UART, PM25] Data not available.
19:52:54:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:736 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:736 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:756 -> [UART, PM25] Reading data...
19:52:54:757 -> [UART, PM25] Data not available.
19:52:54:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:757 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:757 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:777 -> [UART, PM25] Reading data...
19:52:54:777 -> [UART, PM25] Data not available.
19:52:54:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:778 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:778 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:798 -> [UART, PM25] Reading data...
19:52:54:799 -> [UART, PM25] Data not available.
19:52:54:799 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:799 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:799 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:799 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:819 -> [UART, PM25] Reading data...
19:52:54:820 -> [UART, PM25] Data not available.
19:52:54:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:820 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:820 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:840 -> [UART, PM25] Reading data...
19:52:54:840 -> [UART, PM25] Data not available.
19:52:54:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:841 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:841 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:861 -> [UART, PM25] Reading data...
19:52:54:861 -> [UART, PM25] Data not available.
19:52:54:861 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:861 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:861 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:861 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:882 -> [UART, PM25] Reading data...
19:52:54:883 -> [UART, PM25] Data not available.
19:52:54:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:883 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:883 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:903 -> [UART, PM25] Reading data...
19:52:54:903 -> [UART, PM25] Data not available.
19:52:54:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:904 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:904 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:925 -> [UART, PM25] Reading data...
19:52:54:925 -> [UART, PM25] Data not available.
19:52:54:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:925 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:925 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:945 -> [UART, PM25] Reading data...
19:52:54:945 -> [UART, PM25] Data not available.
19:52:54:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:945 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:945 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:966 -> [UART, PM25] Reading data...
19:52:54:966 -> [UART, PM25] Data not available.
19:52:54:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:967 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:967 -> [UART, PM25] Uart available, resetting event queue..
19:52:54:987 -> [UART, PM25] Reading data...
19:52:54:987 -> [UART, PM25] Data not available.
19:52:54:987 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:54:987 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:54:987 -> [UART, PM25] Uart available, clearing write errors..
19:52:54:987 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:008 -> [UART, PM25] Reading data...
19:52:55:009 -> [UART, PM25] Data not available.
19:52:55:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:029 -> [UART, PM25] Reading data...
19:52:55:030 -> [UART, PM25] Data not available.
19:52:55:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:030 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:030 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:050 -> [UART, PM25] Reading data...
19:52:55:051 -> [UART, PM25] Data not available.
19:52:55:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:051 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:051 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:071 -> [UART, PM25] Reading data...
19:52:55:071 -> [UART, PM25] Data not available.
19:52:55:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:072 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:072 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:092 -> [UART, PM25] Reading data...
19:52:55:093 -> [UART, PM25] Data not available.
19:52:55:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:093 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:093 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:113 -> [UART, PM25] Reading data...
19:52:55:114 -> [UART, PM25] Data not available.
19:52:55:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:114 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:114 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:134 -> [UART, PM25] Reading data...
19:52:55:134 -> [UART, PM25] Data not available.
19:52:55:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:134 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:134 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:155 -> [UART, PM25] Reading data...
19:52:55:155 -> [UART, PM25] Data not available.
19:52:55:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:156 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:156 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:176 -> [UART, PM25] Reading data...
19:52:55:177 -> [UART, PM25] Data not available.
19:52:55:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:177 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:177 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:197 -> [UART, PM25] Reading data...
19:52:55:198 -> [UART, PM25] Data not available.
19:52:55:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:198 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:198 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:218 -> [UART, PM25] Reading data...
19:52:55:218 -> [UART, PM25] Data not available.
19:52:55:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:219 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:219 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:239 -> [UART, PM25] Reading data...
19:52:55:240 -> [UART, PM25] Data not available.
19:52:55:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:240 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:240 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:260 -> [UART, PM25] Reading data...
19:52:55:261 -> [UART, PM25] Data not available.
19:52:55:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:261 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:261 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:281 -> [UART, PM25] Reading data...
19:52:55:282 -> [UART, PM25] Data not available.
19:52:55:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:282 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:282 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:302 -> [UART, PM25] Reading data...
19:52:55:303 -> [UART, PM25] Data not available.
19:52:55:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:303 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:303 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:323 -> [UART, PM25] Reading data...
19:52:55:323 -> [UART, PM25] Data not available.
19:52:55:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:324 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:324 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:344 -> [UART, PM25] Reading data...
19:52:55:345 -> [UART, PM25] Data not available.
19:52:55:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:345 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:345 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:366 -> [UART, PM25] Reading data...
19:52:55:367 -> [UART, PM25] Data not available.
19:52:55:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:367 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:367 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:387 -> [UART, PM25] Reading data...
19:52:55:387 -> [UART, PM25] Data not available.
19:52:55:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:388 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:388 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:408 -> [UART, PM25] Reading data...
19:52:55:409 -> [UART, PM25] Data not available.
19:52:55:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:409 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:409 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:429 -> [UART, PM25] Reading data...
19:52:55:429 -> [UART, PM25] Data not available.
19:52:55:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:430 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:430 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:450 -> [UART, PM25] Reading data...
19:52:55:450 -> [UART, PM25] Data not available.
19:52:55:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:451 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:451 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:480 -> [UART, PM25] Reading data...
19:52:55:481 -> [UART, PM25] Data not available.
19:52:55:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:481 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:481 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:492 -> [UART, PM25] Reading data...
19:52:55:493 -> [UART, PM25] Data not available.
19:52:55:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:493 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:493 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:513 -> [UART, PM25] Reading data...
19:52:55:513 -> [UART, PM25] Data not available.
19:52:55:514 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:514 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:514 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:514 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:534 -> [UART, PM25] Reading data...
19:52:55:535 -> [UART, PM25] Data not available.
19:52:55:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:535 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:535 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:555 -> [UART, PM25] Reading data...
19:52:55:555 -> [UART, PM25] Data not available.
19:52:55:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:556 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:556 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:576 -> [UART, PM25] Reading data...
19:52:55:577 -> [UART, PM25] Data not available.
19:52:55:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:577 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:577 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:597 -> [UART, PM25] Reading data...
19:52:55:598 -> [UART, PM25] Data not available.
19:52:55:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:598 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:598 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:618 -> [UART, PM25] Reading data...
19:52:55:619 -> [UART, PM25] Data not available.
19:52:55:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:619 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:619 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:639 -> [UART, PM25] Reading data...
19:52:55:639 -> [UART, PM25] Data not available.
19:52:55:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:640 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:640 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:660 -> [UART, PM25] Reading data...
19:52:55:661 -> [UART, PM25] Data not available.
19:52:55:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:661 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:661 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:684 -> [UART, PM25] Reading data...
19:52:55:686 -> [UART, PM25] Data not available.
19:52:55:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:686 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:686 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:702 -> [UART, PM25] Reading data...
19:52:55:702 -> [UART, PM25] Data not available.
19:52:55:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:702 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:702 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:723 -> [UART, PM25] Reading data...
19:52:55:724 -> [UART, PM25] Data not available.
19:52:55:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:724 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:724 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:744 -> [UART, PM25] Reading data...
19:52:55:745 -> [UART, PM25] Data not available.
19:52:55:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:745 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:745 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:765 -> [UART, PM25] Reading data...
19:52:55:765 -> [UART, PM25] Data not available.
19:52:55:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:766 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:766 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:786 -> [UART, PM25] Reading data...
19:52:55:786 -> [UART, PM25] Data not available.
19:52:55:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:787 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:787 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:807 -> [UART, PM25] Reading data...
19:52:55:808 -> [UART, PM25] Data not available.
19:52:55:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:808 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:808 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:828 -> [UART, PM25] Reading data...
19:52:55:829 -> [UART, PM25] Data not available.
19:52:55:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:829 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:829 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:849 -> [UART, PM25] Reading data...
19:52:55:850 -> [UART, PM25] Data not available.
19:52:55:850 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:850 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:850 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:850 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:870 -> [UART, PM25] Reading data...
19:52:55:871 -> [UART, PM25] Data not available.
19:52:55:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:871 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:871 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:891 -> [UART, PM25] Reading data...
19:52:55:892 -> [UART, PM25] Data not available.
19:52:55:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:892 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:892 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:912 -> [UART, PM25] Reading data...
19:52:55:912 -> [UART, PM25] Data not available.
19:52:55:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:913 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:913 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:933 -> [UART, PM25] Reading data...
19:52:55:934 -> [UART, PM25] Data not available.
19:52:55:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:934 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:934 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:954 -> [UART, PM25] Reading data...
19:52:55:955 -> [UART, PM25] Data not available.
19:52:55:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:955 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:955 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:975 -> [UART, PM25] Reading data...
19:52:55:976 -> [UART, PM25] Data not available.
19:52:55:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:976 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:976 -> [UART, PM25] Uart available, resetting event queue..
19:52:55:996 -> [UART, PM25] Reading data...
19:52:55:997 -> [UART, PM25] Data not available.
19:52:55:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:55:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:55:997 -> [UART, PM25] Uart available, clearing write errors..
19:52:55:997 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:017 -> [UART, PM25] Reading data...
19:52:56:018 -> [UART, PM25] Data not available.
19:52:56:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:018 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:018 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:038 -> [UART, PM25] Reading data...
19:52:56:039 -> [UART, PM25] Data not available.
19:52:56:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:039 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:039 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:059 -> [UART, PM25] Reading data...
19:52:56:059 -> [UART, PM25] Data not available.
19:52:56:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:060 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:060 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:080 -> [UART, PM25] Reading data...
19:52:56:081 -> [UART, PM25] Data not available.
19:52:56:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:081 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:081 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:102 -> [UART, PM25] Reading data...
19:52:56:102 -> [UART, PM25] Data not available.
19:52:56:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:102 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:102 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:150 -> [UART, PM25] Reading data...
19:52:56:159 -> [UART, PM25] Data not available.
19:52:56:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:159 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:159 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:159 -> [UART, PM25] Reading data...
19:52:56:159 -> [UART, PM25] Data not available.
19:52:56:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:159 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:159 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:168 -> [UART, PM25] Reading data...
19:52:56:168 -> [UART, PM25] Data not available.
19:52:56:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:168 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:168 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:185 -> [UART, PM25] Reading data...
19:52:56:186 -> [UART, PM25] Data not available.
19:52:56:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:186 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:186 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:206 -> [UART, PM25] Reading data...
19:52:56:207 -> [UART, PM25] Data not available.
19:52:56:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:207 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:207 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:227 -> [UART, PM25] Reading data...
19:52:56:227 -> [UART, PM25] Data not available.
19:52:56:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:227 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:227 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:248 -> [UART, PM25] Reading data...
19:52:56:248 -> [UART, PM25] Data not available.
19:52:56:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:249 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:249 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:269 -> [UART, PM25] Reading data...
19:52:56:269 -> [UART, PM25] Data not available.
19:52:56:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:269 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:269 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:290 -> [UART, PM25] Reading data...
19:52:56:291 -> [UART, PM25] Data not available.
19:52:56:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:291 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:291 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:311 -> [UART, PM25] Reading data...
19:52:56:312 -> [UART, PM25] Data not available.
19:52:56:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:312 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:312 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:332 -> [UART, PM25] Reading data...
19:52:56:333 -> [UART, PM25] Data not available.
19:52:56:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:333 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:333 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:353 -> [UART, PM25] Reading data...
19:52:56:353 -> [UART, PM25] Data not available.
19:52:56:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:354 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:354 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:374 -> [UART, PM25] Reading data...
19:52:56:375 -> [UART, PM25] Data not available.
19:52:56:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:375 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:375 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:395 -> [UART, PM25] Reading data...
19:52:56:395 -> [UART, PM25] Data not available.
19:52:56:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:396 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:396 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:416 -> [UART, PM25] Reading data...
19:52:56:417 -> [UART, PM25] Data not available.
19:52:56:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:417 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:417 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:437 -> [UART, PM25] Reading data...
19:52:56:437 -> [UART, PM25] Data not available.
19:52:56:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:438 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:438 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:458 -> [UART, PM25] Reading data...
19:52:56:458 -> [UART, PM25] Data not available.
19:52:56:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:458 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:458 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:479 -> [UART, PM25] Reading data...
19:52:56:479 -> [UART, PM25] Data not available.
19:52:56:480 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:480 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:480 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:480 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:510 -> [UART, PM25] Reading data...
19:52:56:510 -> [UART, PM25] Data not available.
19:52:56:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:511 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:511 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:521 -> [UART, PM25] Reading data...
19:52:56:521 -> [UART, PM25] Data not available.
19:52:56:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:521 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:521 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:542 -> [UART, PM25] Reading data...
19:52:56:543 -> [UART, PM25] Data not available.
19:52:56:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:543 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:543 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:563 -> [UART, PM25] Reading data...
19:52:56:563 -> [UART, PM25] Data not available.
19:52:56:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:564 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:564 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:584 -> [UART, PM25] Reading data...
19:52:56:584 -> [UART, PM25] Data not available.
19:52:56:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:585 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:585 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:605 -> [UART, PM25] Reading data...
19:52:56:605 -> [UART, PM25] Data not available.
19:52:56:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:606 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:606 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:626 -> [UART, PM25] Reading data...
19:52:56:626 -> [UART, PM25] Data not available.
19:52:56:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:627 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:627 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:647 -> [UART, PM25] Reading data...
19:52:56:648 -> [UART, PM25] Data not available.
19:52:56:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:648 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:648 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:668 -> [UART, PM25] Reading data...
19:52:56:669 -> [UART, PM25] Data not available.
19:52:56:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:669 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:669 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:689 -> [UART, PM25] Reading data...
19:52:56:690 -> [UART, PM25] Data not available.
19:52:56:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:690 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:690 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:710 -> [UART, PM25] Reading data...
19:52:56:710 -> [UART, PM25] Data not available.
19:52:56:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:711 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:711 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:731 -> [UART, PM25] Reading data...
19:52:56:731 -> [UART, PM25] Data not available.
19:52:56:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:731 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:731 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:752 -> [UART, PM25] Reading data...
19:52:56:753 -> [UART, PM25] Data not available.
19:52:56:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:753 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:753 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:773 -> [UART, PM25] Reading data...
19:52:56:773 -> [UART, PM25] Data not available.
19:52:56:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:774 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:774 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:794 -> [UART, PM25] Reading data...
19:52:56:794 -> [UART, PM25] Data not available.
19:52:56:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:795 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:795 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:815 -> [UART, PM25] Reading data...
19:52:56:816 -> [UART, PM25] Data not available.
19:52:56:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:816 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:816 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:836 -> [UART, PM25] Reading data...
19:52:56:836 -> [UART, PM25] Data not available.
19:52:56:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:837 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:837 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:857 -> [UART, PM25] Reading data...
19:52:56:858 -> [UART, PM25] Data not available.
19:52:56:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:858 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:858 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:878 -> [UART, PM25] Reading data...
19:52:56:879 -> [UART, PM25] Data not available.
19:52:56:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:879 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:879 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:899 -> [UART, PM25] Reading data...
19:52:56:899 -> [UART, PM25] Data not available.
19:52:56:900 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:900 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:900 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:900 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:920 -> [UART, PM25] Reading data...
19:52:56:921 -> [UART, PM25] Data not available.
19:52:56:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:921 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:921 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:941 -> [UART, PM25] Reading data...
19:52:56:941 -> [UART, PM25] Data not available.
19:52:56:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:941 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:941 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:962 -> [UART, PM25] Reading data...
19:52:56:962 -> [UART, PM25] Data not available.
19:52:56:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:963 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:963 -> [UART, PM25] Uart available, resetting event queue..
19:52:56:983 -> [UART, PM25] Reading data...
19:52:56:983 -> [UART, PM25] Data not available.
19:52:56:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:56:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:56:984 -> [UART, PM25] Uart available, clearing write errors..
19:52:56:984 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:004 -> [UART, PM25] Reading data...
19:52:57:009 -> [UART, PM25] Data not available.
19:52:57:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:009 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:009 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:025 -> [UART, PM25] Reading data...
19:52:57:025 -> [UART, PM25] Data not available.
19:52:57:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:026 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:026 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:046 -> [UART, PM25] Reading data...
19:52:57:047 -> [UART, PM25] Data not available.
19:52:57:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:047 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:047 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:067 -> [UART, PM25] Reading data...
19:52:57:068 -> [UART, PM25] Data not available.
19:52:57:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:068 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:068 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:089 -> [UART, PM25] Reading data...
19:52:57:089 -> [UART, PM25] Data not available.
19:52:57:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:089 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:089 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:109 -> [UART, PM25] Reading data...
19:52:57:110 -> [UART, PM25] Data not available.
19:52:57:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:110 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:110 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:131 -> [UART, PM25] Reading data...
19:52:57:131 -> [UART, PM25] Data not available.
19:52:57:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:131 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:131 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:151 -> [UART, PM25] Reading data...
19:52:57:151 -> [UART, PM25] Data not available.
19:52:57:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:151 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:151 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:172 -> [UART, PM25] Reading data...
19:52:57:172 -> [UART, PM25] Data not available.
19:52:57:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:172 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:172 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:193 -> [UART, PM25] Reading data...
19:52:57:193 -> [UART, PM25] Data not available.
19:52:57:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:194 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:194 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:214 -> [UART, PM25] Reading data...
19:52:57:214 -> [UART, PM25] Data not available.
19:52:57:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:215 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:215 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:235 -> [UART, PM25] Reading data...
19:52:57:236 -> [UART, PM25] Data not available.
19:52:57:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:236 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:236 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:256 -> [UART, PM25] Reading data...
19:52:57:256 -> [UART, PM25] Data not available.
19:52:57:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:257 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:257 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:277 -> [UART, PM25] Reading data...
19:52:57:277 -> [UART, PM25] Data not available.
19:52:57:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:277 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:277 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:298 -> [UART, PM25] Reading data...
19:52:57:299 -> [UART, PM25] Data not available.
19:52:57:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:299 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:299 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:319 -> [UART, PM25] Reading data...
19:52:57:319 -> [UART, PM25] Data not available.
19:52:57:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:320 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:320 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:340 -> [UART, PM25] Reading data...
19:52:57:341 -> [UART, PM25] Data not available.
19:52:57:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:341 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:341 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:361 -> [UART, PM25] Reading data...
19:52:57:362 -> [UART, PM25] Data not available.
19:52:57:362 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:362 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:362 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:362 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:382 -> [UART, PM25] Reading data...
19:52:57:382 -> [UART, PM25] Data not available.
19:52:57:383 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:383 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:383 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:383 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:403 -> [UART, PM25] Reading data...
19:52:57:403 -> [UART, PM25] Data not available.
19:52:57:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:404 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:404 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:424 -> [UART, PM25] Reading data...
19:52:57:424 -> [UART, PM25] Data not available.
19:52:57:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:425 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:425 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:445 -> [UART, PM25] Reading data...
19:52:57:446 -> [UART, PM25] Data not available.
19:52:57:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:446 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:446 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:466 -> [UART, PM25] Reading data...
19:52:57:466 -> [UART, PM25] Data not available.
19:52:57:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:466 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:466 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:487 -> [UART, PM25] Reading data...
19:52:57:488 -> [UART, PM25] Data not available.
19:52:57:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:488 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:488 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:508 -> [UART, PM25] Reading data...
19:52:57:508 -> [UART, PM25] Data not available.
19:52:57:509 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:509 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:509 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:509 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:538 -> [UART, PM25] Reading data...
19:52:57:538 -> [UART, PM25] Data not available.
19:52:57:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:539 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:539 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:550 -> [UART, PM25] Reading data...
19:52:57:550 -> [UART, PM25] Data not available.
19:52:57:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:551 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:551 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:571 -> [UART, PM25] Reading data...
19:52:57:572 -> [UART, PM25] Data not available.
19:52:57:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:572 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:572 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:592 -> [UART, PM25] Reading data...
19:52:57:592 -> [UART, PM25] Data not available.
19:52:57:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:593 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:593 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:613 -> [UART, PM25] Reading data...
19:52:57:613 -> [UART, PM25] Data not available.
19:52:57:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:614 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:614 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:634 -> [UART, PM25] Reading data...
19:52:57:634 -> [UART, PM25] Data not available.
19:52:57:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:635 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:635 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:655 -> [UART, PM25] Reading data...
19:52:57:656 -> [UART, PM25] Data not available.
19:52:57:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:656 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:656 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:676 -> [UART, PM25] Reading data...
19:52:57:676 -> [UART, PM25] Data not available.
19:52:57:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:677 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:677 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:697 -> [UART, PM25] Reading data...
19:52:57:698 -> [UART, PM25] Data not available.
19:52:57:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:698 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:698 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:718 -> [UART, PM25] Reading data...
19:52:57:718 -> [UART, PM25] Data not available.
19:52:57:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:718 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:718 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:739 -> [UART, PM25] Reading data...
19:52:57:739 -> [UART, PM25] Data not available.
19:52:57:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:740 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:740 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:760 -> [UART, PM25] Reading data...
19:52:57:761 -> [UART, PM25] Data not available.
19:52:57:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:761 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:761 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:781 -> [UART, PM25] Reading data...
19:52:57:782 -> [UART, PM25] Data not available.
19:52:57:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:782 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:782 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:802 -> [UART, PM25] Reading data...
19:52:57:803 -> [UART, PM25] Data not available.
19:52:57:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:803 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:803 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:823 -> [UART, PM25] Reading data...
19:52:57:824 -> [UART, PM25] Data not available.
19:52:57:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:824 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:824 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:844 -> [UART, PM25] Reading data...
19:52:57:845 -> [UART, PM25] Data not available.
19:52:57:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:845 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:845 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:865 -> [UART, PM25] Reading data...
19:52:57:866 -> [UART, PM25] Data not available.
19:52:57:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:866 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:866 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:886 -> [UART, PM25] Reading data...
19:52:57:887 -> [UART, PM25] Data not available.
19:52:57:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:887 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:887 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:907 -> [UART, PM25] Reading data...
19:52:57:907 -> [UART, PM25] Data not available.
19:52:57:907 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:907 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:907 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:907 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:955 -> [UART, PM25] Reading data...
19:52:57:956 -> [UART, PM25] Data not available.
19:52:57:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:956 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:956 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:956 -> [UART, PM25] Reading data...
19:52:57:956 -> [UART, PM25] Data not available.
19:52:57:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:956 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:956 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:970 -> [UART, PM25] Reading data...
19:52:57:971 -> [UART, PM25] Data not available.
19:52:57:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:971 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:971 -> [UART, PM25] Uart available, resetting event queue..
19:52:57:991 -> [UART, PM25] Reading data...
19:52:57:992 -> [UART, PM25] Data not available.
19:52:57:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:57:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:57:992 -> [UART, PM25] Uart available, clearing write errors..
19:52:57:992 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:012 -> [UART, PM25] Reading data...
19:52:58:012 -> [UART, PM25] Data not available.
19:52:58:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:013 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:013 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:033 -> [UART, PM25] Reading data...
19:52:58:033 -> [UART, PM25] Data not available.
19:52:58:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:034 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:034 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:054 -> [UART, PM25] Reading data...
19:52:58:054 -> [UART, PM25] Data not available.
19:52:58:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:055 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:055 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:055 -> PING!
19:52:58:268 -> [UART, PM25] Reading data...
19:52:58:268 -> [UART, PM25] Data not available.
19:52:58:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:269 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:269 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:289 -> [UART, PM25] Reading data...
19:52:58:289 -> [UART, PM25] Data not available.
19:52:58:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:289 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:289 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:310 -> [UART, PM25] Reading data...
19:52:58:310 -> [UART, PM25] Data not available.
19:52:58:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:311 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:311 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:332 -> [UART, PM25] Reading data...
19:52:58:332 -> [UART, PM25] Data not available.
19:52:58:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:332 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:332 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:352 -> [UART, PM25] Reading data...
19:52:58:352 -> [UART, PM25] Data not available.
19:52:58:353 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:353 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:353 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:353 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:373 -> [UART, PM25] Reading data...
19:52:58:374 -> [UART, PM25] Data not available.
19:52:58:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:374 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:374 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:394 -> [UART, PM25] Reading data...
19:52:58:394 -> [UART, PM25] Data not available.
19:52:58:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:395 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:395 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:415 -> [UART, PM25] Reading data...
19:52:58:415 -> [UART, PM25] Data not available.
19:52:58:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:416 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:416 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:436 -> [UART, PM25] Reading data...
19:52:58:436 -> [UART, PM25] Data not available.
19:52:58:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:437 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:437 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:457 -> [UART, PM25] Reading data...
19:52:58:458 -> [UART, PM25] Data not available.
19:52:58:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:458 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:458 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:478 -> [UART, PM25] Reading data...
19:52:58:479 -> [UART, PM25] Data not available.
19:52:58:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:479 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:479 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:499 -> [UART, PM25] Reading data...
19:52:58:500 -> [UART, PM25] Data not available.
19:52:58:500 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:500 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:500 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:500 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:520 -> [UART, PM25] Reading data...
19:52:58:521 -> [UART, PM25] Data not available.
19:52:58:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:521 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:521 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:541 -> [UART, PM25] Reading data...
19:52:58:541 -> [UART, PM25] Data not available.
19:52:58:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:542 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:542 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:570 -> [UART, PM25] Reading data...
19:52:58:570 -> [UART, PM25] Data not available.
19:52:58:571 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:571 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:571 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:571 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:583 -> [UART, PM25] Reading data...
19:52:58:584 -> [UART, PM25] Data not available.
19:52:58:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:584 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:584 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:604 -> [UART, PM25] Reading data...
19:52:58:605 -> [UART, PM25] Data not available.
19:52:58:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:605 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:605 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:625 -> [UART, PM25] Reading data...
19:52:58:626 -> [UART, PM25] Data not available.
19:52:58:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:626 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:626 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:646 -> [UART, PM25] Reading data...
19:52:58:647 -> [UART, PM25] Data not available.
19:52:58:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:647 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:647 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:668 -> [UART, PM25] Reading data...
19:52:58:668 -> [UART, PM25] Data not available.
19:52:58:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:668 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:668 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:688 -> [UART, PM25] Reading data...
19:52:58:688 -> [UART, PM25] Data not available.
19:52:58:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:688 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:688 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:709 -> [UART, PM25] Reading data...
19:52:58:710 -> [UART, PM25] Data not available.
19:52:58:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:710 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:710 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:730 -> [UART, PM25] Reading data...
19:52:58:731 -> [UART, PM25] Data not available.
19:52:58:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:731 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:731 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:755 -> [UART, PM25] Reading data...
19:52:58:755 -> [UART, PM25] Data not available.
19:52:58:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:755 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:755 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:772 -> [UART, PM25] Reading data...
19:52:58:773 -> [UART, PM25] Data not available.
19:52:58:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:773 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:773 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:793 -> [UART, PM25] Reading data...
19:52:58:794 -> [UART, PM25] Data not available.
19:52:58:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:794 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:794 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:814 -> [UART, PM25] Reading data...
19:52:58:815 -> [UART, PM25] Data not available.
19:52:58:815 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:815 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:815 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:815 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:835 -> [UART, PM25] Reading data...
19:52:58:836 -> [UART, PM25] Data not available.
19:52:58:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:836 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:836 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:856 -> [UART, PM25] Reading data...
19:52:58:857 -> [UART, PM25] Data not available.
19:52:58:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:857 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:857 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:877 -> [UART, PM25] Reading data...
19:52:58:877 -> [UART, PM25] Data not available.
19:52:58:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:877 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:877 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:898 -> [UART, PM25] Reading data...
19:52:58:898 -> [UART, PM25] Data not available.
19:52:58:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:899 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:899 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:919 -> [UART, PM25] Reading data...
19:52:58:920 -> [UART, PM25] Data not available.
19:52:58:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:920 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:920 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:940 -> [UART, PM25] Reading data...
19:52:58:940 -> [UART, PM25] Data not available.
19:52:58:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:940 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:940 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:961 -> [UART, PM25] Reading data...
19:52:58:962 -> [UART, PM25] Data not available.
19:52:58:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:962 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:962 -> [UART, PM25] Uart available, resetting event queue..
19:52:58:982 -> [UART, PM25] Reading data...
19:52:58:983 -> [UART, PM25] Data not available.
19:52:58:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:58:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:58:983 -> [UART, PM25] Uart available, clearing write errors..
19:52:58:983 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:003 -> [UART, PM25] Reading data...
19:52:59:003 -> [UART, PM25] Data not available.
19:52:59:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:004 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:004 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:024 -> [UART, PM25] Reading data...
19:52:59:024 -> [UART, PM25] Data not available.
19:52:59:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:025 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:025 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:045 -> [UART, PM25] Reading data...
19:52:59:046 -> [UART, PM25] Data not available.
19:52:59:046 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:046 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:046 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:046 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:067 -> [UART, PM25] Reading data...
19:52:59:067 -> [UART, PM25] Data not available.
19:52:59:067 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:067 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:067 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:067 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:090 -> [UART, PM25] Reading data...
19:52:59:090 -> [UART, PM25] Data not available.
19:52:59:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:090 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:090 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:108 -> [UART, PM25] Reading data...
19:52:59:108 -> [UART, PM25] Data not available.
19:52:59:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:108 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:108 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:129 -> [UART, PM25] Reading data...
19:52:59:129 -> [UART, PM25] Data not available.
19:52:59:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:129 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:129 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:150 -> [UART, PM25] Reading data...
19:52:59:150 -> [UART, PM25] Data not available.
19:52:59:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:150 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:150 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:171 -> [UART, PM25] Reading data...
19:52:59:172 -> [UART, PM25] Data not available.
19:52:59:172 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:172 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:172 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:172 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:192 -> [UART, PM25] Reading data...
19:52:59:192 -> [UART, PM25] Data not available.
19:52:59:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:192 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:192 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:213 -> [UART, PM25] Reading data...
19:52:59:213 -> [UART, PM25] Data not available.
19:52:59:214 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:214 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:214 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:214 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:234 -> [UART, PM25] Reading data...
19:52:59:235 -> [UART, PM25] Data not available.
19:52:59:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:235 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:235 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:255 -> [UART, PM25] Reading data...
19:52:59:256 -> [UART, PM25] Data not available.
19:52:59:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:256 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:256 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:276 -> [UART, PM25] Reading data...
19:52:59:277 -> [UART, PM25] Data not available.
19:52:59:277 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:277 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:277 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:277 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:297 -> [UART, PM25] Reading data...
19:52:59:297 -> [UART, PM25] Data not available.
19:52:59:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:298 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:298 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:318 -> [UART, PM25] Reading data...
19:52:59:319 -> [UART, PM25] Data not available.
19:52:59:319 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:319 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:319 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:319 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:339 -> [UART, PM25] Reading data...
19:52:59:339 -> [UART, PM25] Data not available.
19:52:59:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:340 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:340 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:360 -> [UART, PM25] Reading data...
19:52:59:360 -> [UART, PM25] Data not available.
19:52:59:361 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:361 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:361 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:361 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:381 -> [UART, PM25] Reading data...
19:52:59:381 -> [UART, PM25] Data not available.
19:52:59:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:382 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:382 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:402 -> [UART, PM25] Reading data...
19:52:59:403 -> [UART, PM25] Data not available.
19:52:59:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:403 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:403 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:423 -> [UART, PM25] Reading data...
19:52:59:423 -> [UART, PM25] Data not available.
19:52:59:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:423 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:423 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:444 -> [UART, PM25] Reading data...
19:52:59:444 -> [UART, PM25] Data not available.
19:52:59:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:444 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:444 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:465 -> [UART, PM25] Reading data...
19:52:59:466 -> [UART, PM25] Data not available.
19:52:59:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:466 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:466 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:486 -> [UART, PM25] Reading data...
19:52:59:487 -> [UART, PM25] Data not available.
19:52:59:487 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:487 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:487 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:487 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:507 -> [UART, PM25] Reading data...
19:52:59:508 -> [UART, PM25] Data not available.
19:52:59:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:508 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:508 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:528 -> [UART, PM25] Reading data...
19:52:59:529 -> [UART, PM25] Data not available.
19:52:59:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:529 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:529 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:549 -> [UART, PM25] Reading data...
19:52:59:550 -> [UART, PM25] Data not available.
19:52:59:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:550 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:550 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:571 -> [UART, PM25] Reading data...
19:52:59:572 -> [UART, PM25] Data not available.
19:52:59:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:572 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:572 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:603 -> [UART, PM25] Reading data...
19:52:59:603 -> [UART, PM25] Data not available.
19:52:59:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:604 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:604 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:613 -> [UART, PM25] Reading data...
19:52:59:614 -> [UART, PM25] Data not available.
19:52:59:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:614 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:614 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:634 -> [UART, PM25] Reading data...
19:52:59:635 -> [UART, PM25] Data not available.
19:52:59:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:635 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:635 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:655 -> [UART, PM25] Reading data...
19:52:59:655 -> [UART, PM25] Data not available.
19:52:59:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:656 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:656 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:676 -> [UART, PM25] Reading data...
19:52:59:676 -> [UART, PM25] Data not available.19:52:59:721 -> [UART, PM25] Reading data...
19:52:59:722 -> [UART, PM25] Data not available.
19:52:59:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:722 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:722 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:739 -> [UART, PM25] Reading data...
19:52:59:740 -> [UART, PM25] Data not available.
19:52:59:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:740 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:740 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:760 -> [UART, PM25] Reading data...
19:52:59:760 -> [UART, PM25] Data not available.
19:52:59:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:760 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:760 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:697 -> [UART, PM25] Reading data...
19:52:59:697 -> [UART, PM25] Data not available.
19:52:59:697 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:697 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:697 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:697 -> [UART, PM25] Uart available, resetting event queue..

19:52:59:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:677 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:677 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:781 -> [UART, PM25] Reading data...
19:52:59:782 -> [UART, PM25] Data not available.
19:52:59:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:782 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:782 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:802 -> [UART, PM25] Reading data...
19:52:59:802 -> [UART, PM25] Data not available.
19:52:59:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:803 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:803 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:823 -> [UART, PM25] Reading data...
19:52:59:824 -> [UART, PM25] Data not available.
19:52:59:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:824 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:824 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:844 -> [UART, PM25] Reading data...
19:52:59:845 -> [UART, PM25] Data not available.
19:52:59:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:845 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:845 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:865 -> [UART, PM25] Reading data...
19:52:59:865 -> [UART, PM25] Data not available.
19:52:59:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:865 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:865 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:886 -> [UART, PM25] Reading data...
19:52:59:886 -> [UART, PM25] Data not available.
19:52:59:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:887 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:887 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:907 -> [UART, PM25] Reading data...
19:52:59:908 -> [UART, PM25] Data not available.
19:52:59:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:908 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:908 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:928 -> [UART, PM25] Reading data...
19:52:59:929 -> [UART, PM25] Data not available.
19:52:59:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:929 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:929 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:949 -> [UART, PM25] Reading data...
19:52:59:949 -> [UART, PM25] Data not available.
19:52:59:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:950 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:950 -> [UART, PM25] Uart available, resetting event queue..
19:52:59:970 -> [UART, PM25] Reading data...
19:52:59:970 -> [UART, PM25] Data not available.
19:52:59:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:52:59:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:52:59:971 -> [UART, PM25] Uart available, clearing write errors..
19:52:59:971 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:020 -> [UART, PM25] Reading data...
19:53:00:022 -> [UART, PM25] Data not available.
19:53:00:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:022 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:022 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:022 -> [UART, PM25] Reading data...
19:53:00:022 -> [UART, PM25] Data not available.
19:53:00:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:022 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:022 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:033 -> [UART, PM25] Reading data...
19:53:00:036 -> [UART, PM25] Data not available.
19:53:00:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:036 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:036 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:054 -> [UART, PM25] Reading data...
19:53:00:058 -> [UART, PM25] Data not available.
19:53:00:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:058 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:058 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:075 -> [UART, PM25] Reading data...
19:53:00:075 -> [UART, PM25] Data not available.
19:53:00:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:075 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:075 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:096 -> [UART, PM25] Reading data...
19:53:00:096 -> [UART, PM25] Data not available.
19:53:00:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:097 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:097 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:125 -> [UART, PM25] Reading data...
19:53:00:125 -> [UART, PM25] Data not available.
19:53:00:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:125 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:125 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:138 -> [UART, PM25] Reading data...
19:53:00:139 -> [UART, PM25] Data not available.
19:53:00:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:139 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:139 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:159 -> [UART, PM25] Reading data...
19:53:00:159 -> [UART, PM25] Data not available.
19:53:00:159 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:159 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:159 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:159 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:180 -> [UART, PM25] Reading data...
19:53:00:181 -> [UART, PM25] Data not available.
19:53:00:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:181 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:181 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:201 -> [UART, PM25] Reading data...
19:53:00:201 -> [UART, PM25] Data not available.
19:53:00:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:202 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:202 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:222 -> [UART, PM25] Reading data...
19:53:00:223 -> [UART, PM25] Data not available.
19:53:00:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:223 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:223 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:243 -> [UART, PM25] Reading data...
19:53:00:243 -> [UART, PM25] Data not available.
19:53:00:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:244 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:244 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:264 -> [UART, PM25] Reading data...
19:53:00:264 -> [UART, PM25] Data not available.
19:53:00:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:265 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:265 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:285 -> [UART, PM25] Reading data...
19:53:00:286 -> [UART, PM25] Data not available.
19:53:00:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:286 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:286 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:306 -> [UART, PM25] Reading data...
19:53:00:306 -> [UART, PM25] Data not available.
19:53:00:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:307 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:307 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:327 -> [UART, PM25] Reading data...
19:53:00:327 -> [UART, PM25] Data not available.
19:53:00:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:328 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:328 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:348 -> [UART, PM25] Reading data...
19:53:00:348 -> [UART, PM25] Data not available.
19:53:00:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:349 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:349 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:369 -> [UART, PM25] Reading data...
19:53:00:369 -> [UART, PM25] Data not available.
19:53:00:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:370 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:370 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:390 -> [UART, PM25] Reading data...
19:53:00:391 -> [UART, PM25] Data not available.
19:53:00:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:391 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:391 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:411 -> [UART, PM25] Reading data...
19:53:00:412 -> [UART, PM25] Data not available.
19:53:00:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:412 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:412 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:433 -> [UART, PM25] Reading data...
19:53:00:434 -> [UART, PM25] Data not available.
19:53:00:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:434 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:434 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:453 -> [UART, PM25] Reading data...
19:53:00:453 -> [UART, PM25] Data not available.
19:53:00:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:454 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:454 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:474 -> [UART, PM25] Reading data...
19:53:00:474 -> [UART, PM25] Data not available.
19:53:00:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:475 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:475 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:495 -> [UART, PM25] Reading data...
19:53:00:496 -> [UART, PM25] Data not available.
19:53:00:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:496 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:496 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:516 -> [UART, PM25] Reading data...
19:53:00:516 -> [UART, PM25] Data not available.
19:53:00:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:517 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:517 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:537 -> [UART, PM25] Reading data...
19:53:00:537 -> [UART, PM25] Data not available.
19:53:00:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:537 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:537 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:558 -> [UART, PM25] Reading data...
19:53:00:559 -> [UART, PM25] Data not available.
19:53:00:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:559 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:559 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:579 -> [UART, PM25] Reading data...
19:53:00:580 -> [UART, PM25] Data not available.
19:53:00:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:580 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:580 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:600 -> [UART, PM25] Reading data...
19:53:00:601 -> [UART, PM25] Data not available.
19:53:00:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:601 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:601 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:621 -> [UART, PM25] Reading data...
19:53:00:621 -> [UART, PM25] Data not available.
19:53:00:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:621 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:621 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:649 -> [UART, PM25] Reading data...
19:53:00:649 -> [UART, PM25] Data not available.
19:53:00:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:650 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:650 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:663 -> [UART, PM25] Reading data...
19:53:00:663 -> [UART, PM25] Data not available.
19:53:00:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:664 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:664 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:684 -> [UART, PM25] Reading data...
19:53:00:685 -> [UART, PM25] Data not available.
19:53:00:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:685 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:685 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:705 -> [UART, PM25] Reading data...
19:53:00:706 -> [UART, PM25] Data not available.
19:53:00:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:706 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:706 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:726 -> [UART, PM25] Reading data...
19:53:00:727 -> [UART, PM25] Data not available.
19:53:00:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:727 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:727 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:747 -> [UART, PM25] Reading data...
19:53:00:747 -> [UART, PM25] Data not available.
19:53:00:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:747 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:747 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:768 -> [UART, PM25] Reading data...
19:53:00:768 -> [UART, PM25] Data not available.
19:53:00:768 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:768 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:768 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:768 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:789 -> [UART, PM25] Reading data...
19:53:00:789 -> [UART, PM25] Data not available.
19:53:00:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:789 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:789 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:810 -> [UART, PM25] Reading data...
19:53:00:811 -> [UART, PM25] Data not available.
19:53:00:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:811 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:811 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:831 -> [UART, PM25] Reading data...
19:53:00:832 -> [UART, PM25] Data not available.
19:53:00:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:832 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:832 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:852 -> [UART, PM25] Reading data...
19:53:00:853 -> [UART, PM25] Data not available.
19:53:00:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:853 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:853 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:873 -> [UART, PM25] Reading data...
19:53:00:873 -> [UART, PM25] Data not available.
19:53:00:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:874 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:874 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:894 -> [UART, PM25] Reading data...
19:53:00:894 -> [UART, PM25] Data not available.
19:53:00:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:895 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:895 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:915 -> [UART, PM25] Reading data...
19:53:00:916 -> [UART, PM25] Data not available.
19:53:00:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:916 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:916 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:936 -> [UART, PM25] Reading data...
19:53:00:937 -> [UART, PM25] Data not available.
19:53:00:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:937 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:937 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:957 -> [UART, PM25] Reading data...
19:53:00:957 -> [UART, PM25] Data not available.
19:53:00:957 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:957 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:957 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:957 -> [UART, PM25] Uart available, resetting event queue..
19:53:00:978 -> [UART, PM25] Reading data...
19:53:00:978 -> [UART, PM25] Data not available.
19:53:00:979 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:00:979 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:00:979 -> [UART, PM25] Uart available, clearing write errors..
19:53:00:979 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:001 -> [UART, PM25] Reading data...
19:53:01:002 -> [UART, PM25] Data not available.
19:53:01:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:002 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:002 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:020 -> [UART, PM25] Reading data...
19:53:01:021 -> [UART, PM25] Data not available.
19:53:01:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:021 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:021 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:041 -> [UART, PM25] Reading data...
19:53:01:042 -> [UART, PM25] Data not available.
19:53:01:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:042 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:042 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:062 -> [UART, PM25] Reading data...
19:53:01:062 -> [UART, PM25] Data not available.
19:53:01:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:063 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:063 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:083 -> [UART, PM25] Reading data...
19:53:01:084 -> [UART, PM25] Data not available.
19:53:01:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:084 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:084 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:104 -> [UART, PM25] Reading data...
19:53:01:105 -> [UART, PM25] Data not available.
19:53:01:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:105 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:105 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:125 -> [UART, PM25] Reading data...
19:53:01:125 -> [UART, PM25] Data not available.
19:53:01:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:126 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:126 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:146 -> [UART, PM25] Reading data...
19:53:01:146 -> [UART, PM25] Data not available.
19:53:01:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:147 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:147 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:167 -> [UART, PM25] Reading data...
19:53:01:167 -> [UART, PM25] Data not available.
19:53:01:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:167 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:167 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:188 -> [UART, PM25] Reading data...
19:53:01:189 -> [UART, PM25] Data not available.
19:53:01:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:189 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:189 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:209 -> [UART, PM25] Reading data...
19:53:01:210 -> [UART, PM25] Data not available.
19:53:01:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:210 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:210 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:230 -> [UART, PM25] Reading data...
19:53:01:231 -> [UART, PM25] Data not available.
19:53:01:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:231 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:231 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:251 -> [UART, PM25] Reading data...
19:53:01:252 -> [UART, PM25] Data not available.
19:53:01:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:252 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:252 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:272 -> [UART, PM25] Reading data...
19:53:01:272 -> [UART, PM25] Data not available.
19:53:01:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:273 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:273 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:293 -> [UART, PM25] Reading data...
19:53:01:293 -> [UART, PM25] Data not available.
19:53:01:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:293 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:293 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:314 -> [UART, PM25] Reading data...
19:53:01:315 -> [UART, PM25] Data not available.
19:53:01:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:335 -> [UART, PM25] Reading data...
19:53:01:335 -> [UART, PM25] Data not available.
19:53:01:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:335 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:335 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:356 -> [UART, PM25] Reading data...
19:53:01:357 -> [UART, PM25] Data not available.
19:53:01:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:357 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:357 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:377 -> [UART, PM25] Reading data...
19:53:01:378 -> [UART, PM25] Data not available.
19:53:01:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:378 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:378 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:398 -> [UART, PM25] Reading data...
19:53:01:398 -> [UART, PM25] Data not available.
19:53:01:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:398 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:398 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:419 -> [UART, PM25] Reading data...
19:53:01:420 -> [UART, PM25] Data not available.
19:53:01:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:420 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:420 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:440 -> [UART, PM25] Reading data...
19:53:01:440 -> [UART, PM25] Data not available.
19:53:01:440 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:440 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:440 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:440 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:461 -> [UART, PM25] Reading data...
19:53:01:461 -> [UART, PM25] Data not available.
19:53:01:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:461 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:461 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:482 -> [UART, PM25] Reading data...
19:53:01:482 -> [UART, PM25] Data not available.
19:53:01:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:483 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:483 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:503 -> [UART, PM25] Reading data...
19:53:01:504 -> [UART, PM25] Data not available.
19:53:01:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:504 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:504 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:524 -> [UART, PM25] Reading data...
19:53:01:525 -> [UART, PM25] Data not available.
19:53:01:525 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:525 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:525 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:525 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:545 -> [UART, PM25] Reading data...
19:53:01:546 -> [UART, PM25] Data not available.
19:53:01:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:546 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:546 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:566 -> [UART, PM25] Reading data...
19:53:01:567 -> [UART, PM25] Data not available.
19:53:01:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:567 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:567 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:587 -> [UART, PM25] Reading data...
19:53:01:587 -> [UART, PM25] Data not available.
19:53:01:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:588 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:588 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:608 -> [UART, PM25] Reading data...
19:53:01:608 -> [UART, PM25] Data not available.
19:53:01:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:609 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:609 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:629 -> [UART, PM25] Reading data...
19:53:01:629 -> [UART, PM25] Data not available.
19:53:01:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:630 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:630 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:650 -> [UART, PM25] Reading data...
19:53:01:650 -> [UART, PM25] Data not available.
19:53:01:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:650 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:650 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:681 -> [UART, PM25] Reading data...
19:53:01:681 -> [UART, PM25] Data not available.
19:53:01:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:682 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:682 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:692 -> [UART, PM25] Reading data...
19:53:01:693 -> [UART, PM25] Data not available.
19:53:01:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:693 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:693 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:727 -> [UART, PM25] Reading data...
19:53:01:744 -> [UART, PM25] Data not available.
19:53:01:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:744 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:744 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:744 -> [UART, PM25] Reading data...
19:53:01:744 -> [UART, PM25] Data not available.
19:53:01:744 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:744 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:744 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:744 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:757 -> [UART, PM25] Reading data...
19:53:01:757 -> [UART, PM25] Data not available.
19:53:01:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:757 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:757 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:777 -> [UART, PM25] Reading data...
19:53:01:778 -> [UART, PM25] Data not available.
19:53:01:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:778 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:778 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:797 -> [UART, PM25] Reading data...
19:53:01:797 -> [UART, PM25] Data not available.
19:53:01:797 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:797 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:797 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:818 -> [UART, PM25] Reading data...
19:53:01:818 -> [UART, PM25] Data not available.
19:53:01:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:819 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:819 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:839 -> [UART, PM25] Reading data...
19:53:01:839 -> [UART, PM25] Data not available.
19:53:01:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:840 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:840 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:840 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:860 -> [UART, PM25] Reading data...
19:53:01:860 -> [UART, PM25] Data not available.
19:53:01:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:860 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:860 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:881 -> [UART, PM25] Reading data...
19:53:01:881 -> [UART, PM25] Data not available.
19:53:01:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:881 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:881 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:902 -> [UART, PM25] Reading data...
19:53:01:902 -> [UART, PM25] Data not available.
19:53:01:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:903 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:903 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:923 -> [UART, PM25] Reading data...
19:53:01:924 -> [UART, PM25] Data not available.
19:53:01:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:924 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:924 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:944 -> [UART, PM25] Reading data...
19:53:01:945 -> [UART, PM25] Data not available.
19:53:01:945 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:945 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:945 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:945 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:965 -> [UART, PM25] Reading data...
19:53:01:965 -> [UART, PM25] Data not available.
19:53:01:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:966 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:966 -> [UART, PM25] Uart available, resetting event queue..
19:53:01:986 -> [UART, PM25] Reading data...
19:53:01:986 -> [UART, PM25] Data not available.
19:53:01:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:01:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:01:986 -> [UART, PM25] Uart available, clearing write errors..
19:53:01:986 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:007 -> [UART, PM25] Reading data...
19:53:02:007 -> [UART, PM25] Data not available.
19:53:02:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:008 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:008 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:030 -> [UART, PM25] Reading data...
19:53:02:031 -> [UART, PM25] Data not available.
19:53:02:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:031 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:031 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:049 -> [UART, PM25] Reading data...
19:53:02:049 -> [UART, PM25] Data not available.
19:53:02:050 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:050 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:050 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:050 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:070 -> [UART, PM25] Reading data...
19:53:02:070 -> [UART, PM25] Data not available.
19:53:02:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:071 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:071 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:091 -> [UART, PM25] Reading data...
19:53:02:091 -> [UART, PM25] Data not available.
19:53:02:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:092 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:092 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:112 -> [UART, PM25] Reading data...
19:53:02:112 -> [UART, PM25] Data not available.
19:53:02:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:112 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:112 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:137 -> [UART, PM25] Reading data...
19:53:02:138 -> [UART, PM25] Data not available.
19:53:02:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:138 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:138 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:155 -> [UART, PM25] Reading data...
19:53:02:155 -> [UART, PM25] Data not available.
19:53:02:155 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:155 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:155 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:155 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:175 -> [UART, PM25] Reading data...
19:53:02:175 -> [UART, PM25] Data not available.
19:53:02:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:176 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:176 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:197 -> [UART, PM25] Reading data...
19:53:02:198 -> [UART, PM25] Data not available.
19:53:02:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:198 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:198 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:217 -> [UART, PM25] Reading data...
19:53:02:217 -> [UART, PM25] Data not available.
19:53:02:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:218 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:218 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:238 -> [UART, PM25] Reading data...
19:53:02:239 -> [UART, PM25] Data not available.
19:53:02:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:239 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:239 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:259 -> [UART, PM25] Reading data...
19:53:02:259 -> [UART, PM25] Data not available.
19:53:02:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:260 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:260 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:280 -> [UART, PM25] Reading data...
19:53:02:280 -> [UART, PM25] Data not available.
19:53:02:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:282 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:282 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:301 -> [UART, PM25] Reading data...
19:53:02:301 -> [UART, PM25] Data not available.
19:53:02:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:302 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:302 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:322 -> [UART, PM25] Reading data...
19:53:02:323 -> [UART, PM25] Data not available.
19:53:02:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:323 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:323 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:343 -> [UART, PM25] Reading data...
19:53:02:344 -> [UART, PM25] Data not available.
19:53:02:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:344 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:344 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:364 -> [UART, PM25] Reading data...
19:53:02:365 -> [UART, PM25] Data not available.
19:53:02:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:365 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:365 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:385 -> [UART, PM25] Reading data...
19:53:02:386 -> [UART, PM25] Data not available.
19:53:02:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:386 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:386 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:406 -> [UART, PM25] Reading data...
19:53:02:407 -> [UART, PM25] Data not available.
19:53:02:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:407 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:407 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:427 -> [UART, PM25] Reading data...
19:53:02:427 -> [UART, PM25] Data not available.
19:53:02:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:428 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:428 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:448 -> [UART, PM25] Reading data...
19:53:02:448 -> [UART, PM25] Data not available.
19:53:02:449 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:449 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:449 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:449 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:469 -> [UART, PM25] Reading data...
19:53:02:469 -> [UART, PM25] Data not available.
19:53:02:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:470 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:470 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:490 -> [UART, PM25] Reading data...
19:53:02:490 -> [UART, PM25] Data not available.
19:53:02:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:490 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:490 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:511 -> [UART, PM25] Reading data...
19:53:02:512 -> [UART, PM25] Data not available.
19:53:02:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:512 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:512 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:532 -> [UART, PM25] Reading data...
19:53:02:533 -> [UART, PM25] Data not available.
19:53:02:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:533 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:533 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:553 -> [UART, PM25] Reading data...
19:53:02:554 -> [UART, PM25] Data not available.
19:53:02:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:554 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:554 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:574 -> [UART, PM25] Reading data...
19:53:02:574 -> [UART, PM25] Data not available.
19:53:02:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:575 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:575 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:595 -> [UART, PM25] Reading data...
19:53:02:595 -> [UART, PM25] Data not available.
19:53:02:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:596 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:596 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:616 -> [UART, PM25] Reading data...
19:53:02:616 -> [UART, PM25] Data not available.
19:53:02:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:616 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:616 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:637 -> [UART, PM25] Reading data...
19:53:02:638 -> [UART, PM25] Data not available.
19:53:02:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:638 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:638 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:658 -> [UART, PM25] Reading data...
19:53:02:658 -> [UART, PM25] Data not available.
19:53:02:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:659 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:659 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:681 -> [UART, PM25] Reading data...
19:53:02:682 -> [UART, PM25] Data not available.
19:53:02:682 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:682 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:682 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:682 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:711 -> [UART, PM25] Reading data...
19:53:02:711 -> [UART, PM25] Data not available.
19:53:02:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:711 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:711 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:721 -> [UART, PM25] Reading data...
19:53:02:722 -> [UART, PM25] Data not available.
19:53:02:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:722 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:722 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:742 -> [UART, PM25] Reading data...
19:53:02:743 -> [UART, PM25] Data not available.
19:53:02:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:743 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:743 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:763 -> [UART, PM25] Reading data...
19:53:02:763 -> [UART, PM25] Data not available.
19:53:02:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:763 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:763 -> [UART, PM25] Uart available, resetting event queue..
19:53:02:764 -> PING!
19:53:02:977 -> [UART, PM25] Reading data...
19:53:02:978 -> [UART, PM25] Data not available.
19:53:02:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:978 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:978 -> [UART, PM25] Uart available, resetting event queue..

19:53:02:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:02:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:02:998 -> [UART, PM25] Uart available, clearing write errors..
19:53:02:998 -> [UART, PM25] Uart available, resetting event queue..

19:53:03:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:020 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:020 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:040 -> [UART, PM25] Reading data...19:53:02:998 -> [UART, PM25] Reading data...
19:53:02:998 -> [UART, PM25] Data not available.19:53:03:019 -> [UART, PM25] Reading data...
19:53:03:019 -> [UART, PM25] Data not available.
19:53:03:041 -> [UART, PM25] Data not available.
19:53:03:041 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:041 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:041 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:041 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:061 -> [UART, PM25] Reading data...
19:53:03:061 -> [UART, PM25] Data not available.
19:53:03:062 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:062 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:062 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:062 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:082 -> [UART, PM25] Reading data...
19:53:03:083 -> [UART, PM25] Data not available.
19:53:03:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:083 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:083 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:103 -> [UART, PM25] Reading data...
19:53:03:104 -> [UART, PM25] Data not available.
19:53:03:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:104 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:104 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:124 -> [UART, PM25] Reading data...
19:53:03:125 -> [UART, PM25] Data not available.
19:53:03:125 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:125 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:125 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:125 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:145 -> [UART, PM25] Reading data...
19:53:03:146 -> [UART, PM25] Data not available.
19:53:03:146 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:146 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:146 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:146 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:166 -> [UART, PM25] Reading data...
19:53:03:167 -> [UART, PM25] Data not available.
19:53:03:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:167 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:167 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:187 -> [UART, PM25] Reading data...
19:53:03:187 -> [UART, PM25] Data not available.
19:53:03:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:188 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:188 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:208 -> [UART, PM25] Reading data...
19:53:03:208 -> [UART, PM25] Data not available.
19:53:03:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:208 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:209 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:229 -> [UART, PM25] Reading data...
19:53:03:230 -> [UART, PM25] Data not available.
19:53:03:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:230 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:230 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:250 -> [UART, PM25] Reading data...
19:53:03:250 -> [UART, PM25] Data not available.
19:53:03:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:251 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:251 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:271 -> [UART, PM25] Reading data...
19:53:03:272 -> [UART, PM25] Data not available.
19:53:03:272 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:272 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:272 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:272 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:292 -> [UART, PM25] Reading data...
19:53:03:292 -> [UART, PM25] Data not available.
19:53:03:293 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:293 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:293 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:293 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:313 -> [UART, PM25] Reading data...
19:53:03:313 -> [UART, PM25] Data not available.
19:53:03:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:313 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:313 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:334 -> [UART, PM25] Reading data...
19:53:03:334 -> [UART, PM25] Data not available.
19:53:03:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:334 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:334 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:355 -> [UART, PM25] Reading data...
19:53:03:356 -> [UART, PM25] Data not available.
19:53:03:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:356 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:356 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:376 -> [UART, PM25] Reading data...
19:53:03:376 -> [UART, PM25] Data not available.
19:53:03:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:377 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:377 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:397 -> [UART, PM25] Reading data...
19:53:03:397 -> [UART, PM25] Data not available.
19:53:03:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:398 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:398 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:418 -> [UART, PM25] Reading data...
19:53:03:419 -> [UART, PM25] Data not available.
19:53:03:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:419 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:419 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:439 -> [UART, PM25] Reading data...
19:53:03:439 -> [UART, PM25] Data not available.
19:53:03:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:439 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:439 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:460 -> [UART, PM25] Reading data...
19:53:03:460 -> [UART, PM25] Data not available.
19:53:03:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:460 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:460 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:481 -> [UART, PM25] Reading data...
19:53:03:482 -> [UART, PM25] Data not available.
19:53:03:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:482 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:482 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:502 -> [UART, PM25] Reading data...
19:53:03:502 -> [UART, PM25] Data not available.
19:53:03:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:502 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:502 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:523 -> [UART, PM25] Reading data...
19:53:03:523 -> [UART, PM25] Data not available.
19:53:03:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:523 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:523 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:544 -> [UART, PM25] Reading data...
19:53:03:587 -> [UART, PM25] Data not available.
19:53:03:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:587 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:587 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:587 -> [UART, PM25] Reading data...
19:53:03:587 -> [UART, PM25] Data not available.
19:53:03:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:587 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:587 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:588 -> [UART, PM25] Reading data...
19:53:03:588 -> [UART, PM25] Data not available.
19:53:03:588 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:588 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:588 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:588 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:607 -> [UART, PM25] Reading data...
19:53:03:608 -> [UART, PM25] Data not available.
19:53:03:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:608 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:608 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:628 -> [UART, PM25] Reading data...
19:53:03:628 -> [UART, PM25] Data not available.
19:53:03:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:628 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:628 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:649 -> [UART, PM25] Reading data...
19:53:03:649 -> [UART, PM25] Data not available.
19:53:03:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:649 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:649 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:670 -> [UART, PM25] Reading data...
19:53:03:671 -> [UART, PM25] Data not available.
19:53:03:671 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:671 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:671 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:671 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:691 -> [UART, PM25] Reading data...
19:53:03:692 -> [UART, PM25] Data not available.
19:53:03:692 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:692 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:692 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:692 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:712 -> [UART, PM25] Reading data...
19:53:03:712 -> [UART, PM25] Data not available.
19:53:03:712 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:712 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:712 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:712 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:744 -> [UART, PM25] Reading data...
19:53:03:745 -> [UART, PM25] Data not available.
19:53:03:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:745 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:745 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:754 -> [UART, PM25] Reading data...
19:53:03:755 -> [UART, PM25] Data not available.
19:53:03:755 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:755 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:755 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:755 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:775 -> [UART, PM25] Reading data...
19:53:03:776 -> [UART, PM25] Data not available.
19:53:03:776 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:776 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:776 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:776 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:796 -> [UART, PM25] Reading data...
19:53:03:796 -> [UART, PM25] Data not available.
19:53:03:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:797 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:797 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:797 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:817 -> [UART, PM25] Reading data...
19:53:03:817 -> [UART, PM25] Data not available.
19:53:03:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:817 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:817 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:838 -> [UART, PM25] Reading data...
19:53:03:839 -> [UART, PM25] Data not available.
19:53:03:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:839 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:839 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:859 -> [UART, PM25] Reading data...
19:53:03:859 -> [UART, PM25] Data not available.
19:53:03:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:860 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:860 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:880 -> [UART, PM25] Reading data...
19:53:03:880 -> [UART, PM25] Data not available.
19:53:03:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:881 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:881 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:901 -> [UART, PM25] Reading data...
19:53:03:901 -> [UART, PM25] Data not available.
19:53:03:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:902 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:902 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:922 -> [UART, PM25] Reading data...
19:53:03:922 -> [UART, PM25] Data not available.
19:53:03:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:922 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:922 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:943 -> [UART, PM25] Reading data...
19:53:03:944 -> [UART, PM25] Data not available.
19:53:03:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:944 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:944 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:964 -> [UART, PM25] Reading data...
19:53:03:965 -> [UART, PM25] Data not available.
19:53:03:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:965 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:965 -> [UART, PM25] Uart available, resetting event queue..
19:53:03:986 -> [UART, PM25] Reading data...
19:53:03:986 -> [UART, PM25] Data not available.
19:53:03:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:03:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:03:986 -> [UART, PM25] Uart available, clearing write errors..
19:53:03:986 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:006 -> [UART, PM25] Reading data...
19:53:04:007 -> [UART, PM25] Data not available.
19:53:04:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:007 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:007 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:027 -> [UART, PM25] Reading data...
19:53:04:028 -> [UART, PM25] Data not available.
19:53:04:028 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:028 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:028 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:028 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:048 -> [UART, PM25] Reading data...
19:53:04:049 -> [UART, PM25] Data not available.
19:53:04:049 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:049 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:049 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:049 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:070 -> [UART, PM25] Reading data...
19:53:04:070 -> [UART, PM25] Data not available.
19:53:04:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:070 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:070 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:090 -> [UART, PM25] Reading data...
19:53:04:090 -> [UART, PM25] Data not available.
19:53:04:091 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:091 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:091 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:091 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:111 -> [UART, PM25] Reading data...
19:53:04:111 -> [UART, PM25] Data not available.
19:53:04:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:112 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:112 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:132 -> [UART, PM25] Reading data...
19:53:04:133 -> [UART, PM25] Data not available.
19:53:04:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:133 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:133 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:153 -> [UART, PM25] Reading data...
19:53:04:154 -> [UART, PM25] Data not available.
19:53:04:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:154 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:154 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:174 -> [UART, PM25] Reading data...
19:53:04:174 -> [UART, PM25] Data not available.
19:53:04:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:175 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:175 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:195 -> [UART, PM25] Reading data...
19:53:04:195 -> [UART, PM25] Data not available.
19:53:04:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:196 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:196 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:216 -> [UART, PM25] Reading data...
19:53:04:217 -> [UART, PM25] Data not available.
19:53:04:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:217 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:217 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:237 -> [UART, PM25] Reading data...
19:53:04:237 -> [UART, PM25] Data not available.
19:53:04:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:238 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:238 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:263 -> [UART, PM25] Reading data...
19:53:04:263 -> [UART, PM25] Data not available.
19:53:04:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:264 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:264 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:279 -> [UART, PM25] Reading data...
19:53:04:279 -> [UART, PM25] Data not available.
19:53:04:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:279 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:279 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:300 -> [UART, PM25] Reading data...
19:53:04:301 -> [UART, PM25] Data not available.
19:53:04:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:301 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:301 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:321 -> [UART, PM25] Reading data...
19:53:04:321 -> [UART, PM25] Data not available.
19:53:04:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:321 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:321 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:342 -> [UART, PM25] Reading data...
19:53:04:343 -> [UART, PM25] Data not available.
19:53:04:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:343 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:343 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:363 -> [UART, PM25] Reading data...
19:53:04:363 -> [UART, PM25] Data not available.
19:53:04:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:364 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:364 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:384 -> [UART, PM25] Reading data...
19:53:04:384 -> [UART, PM25] Data not available.
19:53:04:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:384 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:384 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:405 -> [UART, PM25] Reading data...
19:53:04:406 -> [UART, PM25] Data not available.
19:53:04:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:406 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:406 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:426 -> [UART, PM25] Reading data...
19:53:04:426 -> [UART, PM25] Data not available.
19:53:04:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:427 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:427 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:447 -> [UART, PM25] Reading data...
19:53:04:447 -> [UART, PM25] Data not available.
19:53:04:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:448 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:448 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:468 -> [UART, PM25] Reading data...
19:53:04:469 -> [UART, PM25] Data not available.
19:53:04:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:469 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:469 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:489 -> [UART, PM25] Reading data...
19:53:04:490 -> [UART, PM25] Data not available.
19:53:04:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:490 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:490 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:510 -> [UART, PM25] Reading data...
19:53:04:510 -> [UART, PM25] Data not available.
19:53:04:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:511 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:511 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:534 -> [UART, PM25] Reading data...
19:53:04:535 -> [UART, PM25] Data not available.
19:53:04:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:535 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:535 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:552 -> [UART, PM25] Reading data...
19:53:04:552 -> [UART, PM25] Data not available.
19:53:04:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:553 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:553 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:573 -> [UART, PM25] Reading data...
19:53:04:573 -> [UART, PM25] Data not available.
19:53:04:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:573 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:573 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:594 -> [UART, PM25] Reading data...
19:53:04:595 -> [UART, PM25] Data not available.
19:53:04:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:595 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:595 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:615 -> [UART, PM25] Reading data...
19:53:04:616 -> [UART, PM25] Data not available.
19:53:04:616 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:616 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:616 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:616 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:636 -> [UART, PM25] Reading data...
19:53:04:637 -> [UART, PM25] Data not available.
19:53:04:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:637 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:637 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:657 -> [UART, PM25] Reading data...
19:53:04:657 -> [UART, PM25] Data not available.
19:53:04:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:658 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:658 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:678 -> [UART, PM25] Reading data...
19:53:04:678 -> [UART, PM25] Data not available.
19:53:04:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:679 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:679 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:699 -> [UART, PM25] Reading data...
19:53:04:700 -> [UART, PM25] Data not available.
19:53:04:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:700 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:700 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:720 -> [UART, PM25] Reading data...
19:53:04:721 -> [UART, PM25] Data not available.
19:53:04:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:721 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:721 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:741 -> [UART, PM25] Reading data...
19:53:04:741 -> [UART, PM25] Data not available.
19:53:04:742 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:742 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:742 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:742 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:762 -> [UART, PM25] Reading data...
19:53:04:762 -> [UART, PM25] Data not available.
19:53:04:763 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:763 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:763 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:763 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:786 -> [UART, PM25] Reading data...
19:53:04:786 -> [UART, PM25] Data not available.
19:53:04:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:786 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:786 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:804 -> [UART, PM25] Reading data...
19:53:04:804 -> [UART, PM25] Data not available.
19:53:04:805 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:805 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:805 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:805 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:825 -> [UART, PM25] Reading data...
19:53:04:825 -> [UART, PM25] Data not available.
19:53:04:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:825 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:825 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:846 -> [UART, PM25] Reading data...
19:53:04:846 -> [UART, PM25] Data not available.
19:53:04:847 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:847 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:847 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:847 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:867 -> [UART, PM25] Reading data...
19:53:04:867 -> [UART, PM25] Data not available.
19:53:04:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:868 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:868 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:888 -> [UART, PM25] Reading data...
19:53:04:888 -> [UART, PM25] Data not available.
19:53:04:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:888 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:888 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:909 -> [UART, PM25] Reading data...
19:53:04:910 -> [UART, PM25] Data not available.
19:53:04:910 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:910 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:910 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:910 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:930 -> [UART, PM25] Reading data...
19:53:04:930 -> [UART, PM25] Data not available.
19:53:04:930 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:930 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:930 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:930 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:951 -> [UART, PM25] Reading data...
19:53:04:954 -> [UART, PM25] Data not available.
19:53:04:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:954 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:954 -> [UART, PM25] Uart available, resetting event queue..
19:53:04:972 -> [UART, PM25] Reading data...19:53:04:993 -> [UART, PM25] Reading data...
19:53:04:994 -> [UART, PM25] Data not available.
19:53:04:994 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:994 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:994 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:994 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:014 -> [UART, PM25] Reading data...
19:53:05:014 -> [UART, PM25] Data not available.
19:53:05:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:014 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:014 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:035 -> [UART, PM25] Reading data...
19:53:05:035 -> [UART, PM25] Data not available.
19:53:05:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:036 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:036 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:056 -> [UART, PM25] Reading data...

19:53:04:973 -> [UART, PM25] Data not available.
19:53:04:973 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:04:973 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:04:973 -> [UART, PM25] Uart available, clearing write errors..
19:53:04:973 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:057 -> [UART, PM25] Data not available.
19:53:05:057 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:057 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:057 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:057 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:077 -> [UART, PM25] Reading data...
19:53:05:078 -> [UART, PM25] Data not available.
19:53:05:078 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:078 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:078 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:078 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:098 -> [UART, PM25] Reading data...
19:53:05:098 -> [UART, PM25] Data not available.
19:53:05:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:099 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:099 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:119 -> [UART, PM25] Reading data...
19:53:05:120 -> [UART, PM25] Data not available.
19:53:05:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:120 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:120 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:140 -> [UART, PM25] Reading data...
19:53:05:141 -> [UART, PM25] Data not available.
19:53:05:141 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:141 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:141 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:141 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:161 -> [UART, PM25] Reading data...
19:53:05:161 -> [UART, PM25] Data not available.
19:53:05:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:161 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:161 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:182 -> [UART, PM25] Reading data...
19:53:05:183 -> [UART, PM25] Data not available.
19:53:05:183 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:183 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:183 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:183 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:203 -> [UART, PM25] Reading data...
19:53:05:204 -> [UART, PM25] Data not available.
19:53:05:204 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:204 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:204 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:204 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:224 -> [UART, PM25] Reading data...
19:53:05:224 -> [UART, PM25] Data not available.
19:53:05:225 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:225 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:225 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:225 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:245 -> [UART, PM25] Reading data...
19:53:05:245 -> [UART, PM25] Data not available.
19:53:05:246 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:246 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:246 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:246 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:266 -> [UART, PM25] Reading data...
19:53:05:267 -> [UART, PM25] Data not available.
19:53:05:267 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:267 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:267 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:267 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:298 -> [UART, PM25] Reading data...
19:53:05:298 -> [UART, PM25] Data not available.
19:53:05:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:298 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:298 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:308 -> [UART, PM25] Reading data...
19:53:05:309 -> [UART, PM25] Data not available.
19:53:05:309 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:309 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:309 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:309 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:329 -> [UART, PM25] Reading data...
19:53:05:330 -> [UART, PM25] Data not available.
19:53:05:330 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:330 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:330 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:330 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:350 -> [UART, PM25] Reading data...
19:53:05:350 -> [UART, PM25] Data not available.
19:53:05:351 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:351 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:351 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:351 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:373 -> [UART, PM25] Reading data...
19:53:05:373 -> [UART, PM25] Data not available.
19:53:05:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:373 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:373 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:392 -> [UART, PM25] Reading data...
19:53:05:392 -> [UART, PM25] Data not available.
19:53:05:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:392 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:392 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:413 -> [UART, PM25] Reading data...
19:53:05:414 -> [UART, PM25] Data not available.
19:53:05:414 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:414 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:414 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:414 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:468 -> [UART, PM25] Reading data...
19:53:05:471 -> [UART, PM25] Data not available.
19:53:05:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:471 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:471 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:471 -> [UART, PM25] Reading data...
19:53:05:471 -> [UART, PM25] Data not available.
19:53:05:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:471 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:471 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:476 -> [UART, PM25] Reading data...
19:53:05:476 -> [UART, PM25] Data not available.
19:53:05:476 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:476 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:476 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:476 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:497 -> [UART, PM25] Reading data...
19:53:05:497 -> [UART, PM25] Data not available.
19:53:05:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:497 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:497 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:518 -> [UART, PM25] Reading data...
19:53:05:518 -> [UART, PM25] Data not available.
19:53:05:519 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:519 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:519 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:519 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:539 -> [UART, PM25] Reading data...
19:53:05:539 -> [UART, PM25] Data not available.
19:53:05:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:539 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:539 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:560 -> [UART, PM25] Reading data...
19:53:05:561 -> [UART, PM25] Data not available.
19:53:05:561 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:561 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:561 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:561 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:581 -> [UART, PM25] Reading data...
19:53:05:581 -> [UART, PM25] Data not available.
19:53:05:582 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:582 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:582 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:582 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:602 -> [UART, PM25] Reading data...
19:53:05:602 -> [UART, PM25] Data not available.
19:53:05:603 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:603 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:603 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:603 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:623 -> [UART, PM25] Reading data...
19:53:05:624 -> [UART, PM25] Data not available.
19:53:05:624 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:624 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:624 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:624 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:645 -> [UART, PM25] Reading data...
19:53:05:645 -> [UART, PM25] Data not available.
19:53:05:645 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:645 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:645 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:645 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:665 -> [UART, PM25] Reading data...
19:53:05:665 -> [UART, PM25] Data not available.
19:53:05:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:665 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:665 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:686 -> [UART, PM25] Reading data...
19:53:05:686 -> [UART, PM25] Data not available.
19:53:05:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:686 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:686 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:707 -> [UART, PM25] Reading data...
19:53:05:707 -> [UART, PM25] Data not available.
19:53:05:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:707 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:707 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:728 -> [UART, PM25] Reading data...
19:53:05:729 -> [UART, PM25] Data not available.
19:53:05:729 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:729 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:729 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:729 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:749 -> [UART, PM25] Reading data...
19:53:05:750 -> [UART, PM25] Data not available.
19:53:05:750 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:750 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:750 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:750 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:770 -> [UART, PM25] Reading data...
19:53:05:770 -> [UART, PM25] Data not available.
19:53:05:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:770 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:770 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:791 -> [UART, PM25] Reading data...
19:53:05:791 -> [UART, PM25] Data not available.
19:53:05:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:791 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:791 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:817 -> [UART, PM25] Reading data...
19:53:05:817 -> [UART, PM25] Data not available.
19:53:05:818 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:818 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:818 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:818 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:833 -> [UART, PM25] Reading data...
19:53:05:834 -> [UART, PM25] Data not available.
19:53:05:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:834 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:834 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:854 -> [UART, PM25] Reading data...
19:53:05:854 -> [UART, PM25] Data not available.
19:53:05:855 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:855 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:855 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:855 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:875 -> [UART, PM25] Reading data...
19:53:05:875 -> [UART, PM25] Data not available.
19:53:05:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:875 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:875 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:896 -> [UART, PM25] Reading data...
19:53:05:896 -> [UART, PM25] Data not available.
19:53:05:897 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:897 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:897 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:897 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:920 -> [UART, PM25] Reading data...
19:53:05:920 -> [UART, PM25] Data not available.
19:53:05:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:920 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:920 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:938 -> [UART, PM25] Reading data...
19:53:05:939 -> [UART, PM25] Data not available.
19:53:05:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:939 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:939 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:959 -> [UART, PM25] Reading data...
19:53:05:960 -> [UART, PM25] Data not available.
19:53:05:960 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:960 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:960 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:960 -> [UART, PM25] Uart available, resetting event queue..
19:53:05:980 -> [UART, PM25] Reading data...
19:53:05:981 -> [UART, PM25] Data not available.
19:53:05:981 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:05:981 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:05:981 -> [UART, PM25] Uart available, clearing write errors..
19:53:05:981 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:001 -> [UART, PM25] Reading data...
19:53:06:001 -> [UART, PM25] Data not available.
19:53:06:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:002 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:002 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:022 -> [UART, PM25] Reading data...
19:53:06:023 -> [UART, PM25] Data not available.
19:53:06:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:023 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:023 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:043 -> [UART, PM25] Reading data...
19:53:06:043 -> [UART, PM25] Data not available.
19:53:06:044 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:044 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:044 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:044 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:064 -> [UART, PM25] Reading data...
19:53:06:065 -> [UART, PM25] Data not available.
19:53:06:065 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:065 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:065 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:065 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:087 -> [UART, PM25] Reading data...
19:53:06:087 -> [UART, PM25] Data not available.
19:53:06:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:087 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:087 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:106 -> [UART, PM25] Reading data...
19:53:06:106 -> [UART, PM25] Data not available.
19:53:06:107 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:107 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:107 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:107 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:127 -> [UART, PM25] Reading data...
19:53:06:127 -> [UART, PM25] Data not available.
19:53:06:128 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:128 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:128 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:128 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:148 -> [UART, PM25] Reading data...
19:53:06:149 -> [UART, PM25] Data not available.
19:53:06:149 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:149 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:149 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:149 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:169 -> [UART, PM25] Reading data...
19:53:06:169 -> [UART, PM25] Data not available.
19:53:06:170 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:170 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:170 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:170 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:190 -> [UART, PM25] Reading data...
19:53:06:190 -> [UART, PM25] Data not available.
19:53:06:191 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:191 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:191 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:191 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:211 -> [UART, PM25] Reading data...
19:53:06:211 -> [UART, PM25] Data not available.
19:53:06:212 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:212 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:212 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:212 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:233 -> [UART, PM25] Reading data...
19:53:06:233 -> [UART, PM25] Data not available.
19:53:06:233 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:233 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:233 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:233 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:253 -> [UART, PM25] Reading data...
19:53:06:253 -> [UART, PM25] Data not available.
19:53:06:254 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:254 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:254 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:254 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:274 -> [UART, PM25] Reading data...
19:53:06:275 -> [UART, PM25] Data not available.
19:53:06:275 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:275 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:275 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:275 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:295 -> [UART, PM25] Reading data...
19:53:06:296 -> [UART, PM25] Data not available.
19:53:06:296 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:296 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:296 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:296 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:326 -> [UART, PM25] Reading data...
19:53:06:326 -> [UART, PM25] Data not available.
19:53:06:327 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:327 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:327 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:327 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:337 -> [UART, PM25] Reading data...
19:53:06:338 -> [UART, PM25] Data not available.
19:53:06:338 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:338 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:338 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:338 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:358 -> [UART, PM25] Reading data...
19:53:06:359 -> [UART, PM25] Data not available.
19:53:06:359 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:359 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:359 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:359 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:379 -> [UART, PM25] Reading data...
19:53:06:380 -> [UART, PM25] Data not available.
19:53:06:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:380 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:380 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:400 -> [UART, PM25] Reading data...
19:53:06:401 -> [UART, PM25] Data not available.
19:53:06:401 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:401 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:401 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:401 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:421 -> [UART, PM25] Reading data...
19:53:06:421 -> [UART, PM25] Data not available.
19:53:06:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:421 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:421 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:442 -> [UART, PM25] Reading data...
19:53:06:443 -> [UART, PM25] Data not available.
19:53:06:443 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:443 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:443 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:443 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:463 -> [UART, PM25] Reading data...
19:53:06:464 -> [UART, PM25] Data not available.
19:53:06:464 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:464 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:464 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:464 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:484 -> [UART, PM25] Reading data...
19:53:06:484 -> [UART, PM25] Data not available.
19:53:06:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:484 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:484 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:505 -> [UART, PM25] Reading data...
19:53:06:505 -> [UART, PM25] Data not available.
19:53:06:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:505 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:505 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:526 -> [UART, PM25] Reading data...
19:53:06:526 -> [UART, PM25] Data not available.
19:53:06:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:526 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:526 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:547 -> [UART, PM25] Reading data...
19:53:06:547 -> [UART, PM25] Data not available.
19:53:06:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:548 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:548 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:568 -> [UART, PM25] Reading data...
19:53:06:569 -> [UART, PM25] Data not available.
19:53:06:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:569 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:569 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:589 -> [UART, PM25] Reading data...
19:53:06:590 -> [UART, PM25] Data not available.
19:53:06:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:590 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:590 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:610 -> [UART, PM25] Reading data...
19:53:06:611 -> [UART, PM25] Data not available.
19:53:06:611 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:611 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:611 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:611 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:631 -> [UART, PM25] Reading data...
19:53:06:632 -> [UART, PM25] Data not available.
19:53:06:632 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:632 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:632 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:632 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:652 -> [UART, PM25] Reading data...
19:53:06:652 -> [UART, PM25] Data not available.
19:53:06:653 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:653 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:653 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:653 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:673 -> [UART, PM25] Reading data...
19:53:06:673 -> [UART, PM25] Data not available.
19:53:06:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:673 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:673 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:694 -> [UART, PM25] Reading data...
19:53:06:695 -> [UART, PM25] Data not available.
19:53:06:695 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:695 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:695 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:695 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:715 -> [UART, PM25] Reading data...
19:53:06:715 -> [UART, PM25] Data not available.
19:53:06:716 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:716 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:716 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:716 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:736 -> [UART, PM25] Reading data...
19:53:06:737 -> [UART, PM25] Data not available.
19:53:06:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:737 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:737 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:757 -> [UART, PM25] Reading data...
19:53:06:757 -> [UART, PM25] Data not available.
19:53:06:758 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:758 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:758 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:758 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:778 -> [UART, PM25] Reading data...
19:53:06:779 -> [UART, PM25] Data not available.
19:53:06:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:779 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:779 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:799 -> [UART, PM25] Reading data...
19:53:06:801 -> [UART, PM25] Data not available.
19:53:06:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:801 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:801 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:820 -> [UART, PM25] Reading data...
19:53:06:820 -> [UART, PM25] Data not available.
19:53:06:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:820 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:820 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:842 -> [UART, PM25] Reading data...
19:53:06:842 -> [UART, PM25] Data not available.
19:53:06:842 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:842 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:842 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:842 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:862 -> [UART, PM25] Reading data...
19:53:06:862 -> [UART, PM25] Data not available.
19:53:06:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:862 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:862 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:883 -> [UART, PM25] Reading data...
19:53:06:883 -> [UART, PM25] Data not available.
19:53:06:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:883 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:883 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:904 -> [UART, PM25] Reading data...
19:53:06:904 -> [UART, PM25] Data not available.
19:53:06:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:905 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:905 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:925 -> [UART, PM25] Reading data...
19:53:06:925 -> [UART, PM25] Data not available.
19:53:06:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:925 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:925 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:946 -> [UART, PM25] Reading data...
19:53:06:947 -> [UART, PM25] Data not available.
19:53:06:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:947 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:947 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:967 -> [UART, PM25] Reading data...
19:53:06:967 -> [UART, PM25] Data not available.
19:53:06:968 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:968 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:968 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:968 -> [UART, PM25] Uart available, resetting event queue..
19:53:06:988 -> [UART, PM25] Reading data...
19:53:06:988 -> [UART, PM25] Data not available.
19:53:06:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:06:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:06:988 -> [UART, PM25] Uart available, clearing write errors..
19:53:06:988 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:009 -> [UART, PM25] Reading data...
19:53:07:009 -> [UART, PM25] Data not available.
19:53:07:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:010 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:010 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:030 -> [UART, PM25] Reading data...
19:53:07:030 -> [UART, PM25] Data not available.
19:53:07:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:031 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:031 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:051 -> [UART, PM25] Reading data...
19:53:07:051 -> [UART, PM25] Data not available.
19:53:07:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:052 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:052 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:072 -> [UART, PM25] Reading data...
19:53:07:072 -> [UART, PM25] Data not available.
19:53:07:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:073 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:073 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:093 -> [UART, PM25] Reading data...
19:53:07:093 -> [UART, PM25] Data not available.
19:53:07:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:094 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:094 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:114 -> [UART, PM25] Reading data...
19:53:07:115 -> [UART, PM25] Data not available.
19:53:07:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:115 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:115 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:135 -> [UART, PM25] Reading data...
19:53:07:136 -> [UART, PM25] Data not available.
19:53:07:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:136 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:136 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:179 -> [UART, PM25] Reading data...
19:53:07:194 -> [UART, PM25] Data not available.
19:53:07:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:194 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:194 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:194 -> [UART, PM25] Reading data...
19:53:07:194 -> [UART, PM25] Data not available.
19:53:07:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:194 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:194 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:201 -> [UART, PM25] Reading data...
19:53:07:201 -> [UART, PM25] Data not available.
19:53:07:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:201 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:201 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:219 -> [UART, PM25] Reading data...
19:53:07:219 -> [UART, PM25] Data not available.
19:53:07:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:219 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:219 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:240 -> [UART, PM25] Reading data...
19:53:07:240 -> [UART, PM25] Data not available.
19:53:07:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:240 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:240 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:261 -> [UART, PM25] Reading data...
19:53:07:262 -> [UART, PM25] Data not available.
19:53:07:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:262 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:262 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:282 -> [UART, PM25] Reading data...
19:53:07:282 -> [UART, PM25] Data not available.
19:53:07:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:282 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:282 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:303 -> [UART, PM25] Reading data...
19:53:07:304 -> [UART, PM25] Data not available.
19:53:07:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:304 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:304 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:324 -> [UART, PM25] Reading data...
19:53:07:324 -> [UART, PM25] Data not available.
19:53:07:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:324 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:324 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:356 -> [UART, PM25] Reading data...
19:53:07:356 -> [UART, PM25] Data not available.
19:53:07:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:356 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:356 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:366 -> [UART, PM25] Reading data...
19:53:07:367 -> [UART, PM25] Data not available.
19:53:07:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:367 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:367 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:387 -> [UART, PM25] Reading data...
19:53:07:387 -> [UART, PM25] Data not available.
19:53:07:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:387 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:387 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:408 -> [UART, PM25] Reading data...
19:53:07:408 -> [UART, PM25] Data not available.
19:53:07:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:408 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:408 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:429 -> [UART, PM25] Reading data...
19:53:07:429 -> [UART, PM25] Data not available.
19:53:07:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:430 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:430 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:450 -> [UART, PM25] Reading data...
19:53:07:450 -> [UART, PM25] Data not available.
19:53:07:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:450 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:450 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:471 -> [UART, PM25] Reading data...
19:53:07:472 -> [UART, PM25] Data not available.
19:53:07:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:472 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:472 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:472 -> PING!
19:53:07:685 -> [UART, PM25] Reading data...
19:53:07:685 -> [UART, PM25] Data not available.
19:53:07:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:686 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:686 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:706 -> [UART, PM25] Reading data...
19:53:07:706 -> [UART, PM25] Data not available.
19:53:07:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:706 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:706 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:727 -> [UART, PM25] Reading data...
19:53:07:728 -> [UART, PM25] Data not available.
19:53:07:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:728 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:728 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:748 -> [UART, PM25] Reading data...
19:53:07:748 -> [UART, PM25] Data not available.
19:53:07:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:748 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:748 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:769 -> [UART, PM25] Reading data...
19:53:07:769 -> [UART, PM25] Data not available.
19:53:07:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:770 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:770 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:790 -> [UART, PM25] Reading data...
19:53:07:791 -> [UART, PM25] Data not available.
19:53:07:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:791 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:791 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:811 -> [UART, PM25] Reading data...
19:53:07:811 -> [UART, PM25] Data not available.
19:53:07:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:811 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:811 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:833 -> [UART, PM25] Reading data...
19:53:07:834 -> [UART, PM25] Data not available.
19:53:07:834 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:834 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:834 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:834 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:853 -> [UART, PM25] Reading data...
19:53:07:853 -> [UART, PM25] Data not available.
19:53:07:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:854 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:854 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:874 -> [UART, PM25] Reading data...
19:53:07:874 -> [UART, PM25] Data not available.
19:53:07:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:874 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:874 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:895 -> [UART, PM25] Reading data...
19:53:07:895 -> [UART, PM25] Data not available.
19:53:07:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:895 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:895 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:916 -> [UART, PM25] Reading data...
19:53:07:917 -> [UART, PM25] Data not available.
19:53:07:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:917 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:917 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:937 -> [UART, PM25] Reading data...
19:53:07:937 -> [UART, PM25] Data not available.
19:53:07:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:937 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:937 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:958 -> [UART, PM25] Reading data...
19:53:07:958 -> [UART, PM25] Data not available.
19:53:07:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:958 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:958 -> [UART, PM25] Uart available, resetting event queue..
19:53:07:979 -> [UART, PM25] Reading data...
19:53:07:980 -> [UART, PM25] Data not available.
19:53:07:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:07:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:07:980 -> [UART, PM25] Uart available, clearing write errors..
19:53:07:980 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:000 -> [UART, PM25] Reading data...
19:53:08:001 -> [UART, PM25] Data not available.
19:53:08:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:001 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:001 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:021 -> [UART, PM25] Reading data...
19:53:08:022 -> [UART, PM25] Data not available.
19:53:08:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:022 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:022 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:042 -> [UART, PM25] Reading data...
19:53:08:042 -> [UART, PM25] Data not available.
19:53:08:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:042 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:042 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:063 -> [UART, PM25] Reading data...
19:53:08:064 -> [UART, PM25] Data not available.
19:53:08:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:064 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:064 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:084 -> [UART, PM25] Reading data...
19:53:08:085 -> [UART, PM25] Data not available.
19:53:08:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:085 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:085 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:105 -> [UART, PM25] Reading data...
19:53:08:105 -> [UART, PM25] Data not available.
19:53:08:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:106 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:106 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:126 -> [UART, PM25] Reading data...
19:53:08:127 -> [UART, PM25] Data not available.
19:53:08:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:127 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:127 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:147 -> [UART, PM25] Reading data...
19:53:08:147 -> [UART, PM25] Data not available.
19:53:08:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:148 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:148 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:170 -> [UART, PM25] Reading data...
19:53:08:171 -> [UART, PM25] Data not available.
19:53:08:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:171 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:171 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:189 -> [UART, PM25] Reading data...
19:53:08:190 -> [UART, PM25] Data not available.
19:53:08:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:190 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:190 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:210 -> [UART, PM25] Reading data...
19:53:08:210 -> [UART, PM25] Data not available.
19:53:08:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:211 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:211 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:231 -> [UART, PM25] Reading data...
19:53:08:231 -> [UART, PM25] Data not available.
19:53:08:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:231 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:231 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:252 -> [UART, PM25] Reading data...
19:53:08:253 -> [UART, PM25] Data not available.
19:53:08:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:253 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:253 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:273 -> [UART, PM25] Reading data...
19:53:08:273 -> [UART, PM25] Data not available.
19:53:08:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:274 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:274 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:294 -> [UART, PM25] Reading data...
19:53:08:294 -> [UART, PM25] Data not available.
19:53:08:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:295 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:295 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:315 -> [UART, PM25] Reading data...
19:53:08:315 -> [UART, PM25] Data not available.
19:53:08:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:336 -> [UART, PM25] Reading data...
19:53:08:336 -> [UART, PM25] Data not available.
19:53:08:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:337 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:337 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:358 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:358 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:357 -> [UART, PM25] Reading data...
19:53:08:357 -> [UART, PM25] Data not available.
19:53:08:381 -> [UART, PM25] Reading data...
19:53:08:381 -> [UART, PM25] Data not available.
19:53:08:382 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:382 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:382 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:382 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:399 -> [UART, PM25] Reading data...
19:53:08:399 -> [UART, PM25] Data not available.
19:53:08:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:400 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:400 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:420 -> [UART, PM25] Reading data...
19:53:08:420 -> [UART, PM25] Data not available.
19:53:08:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:421 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:421 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:441 -> [UART, PM25] Reading data...
19:53:08:442 -> [UART, PM25] Data not available.
19:53:08:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:442 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:442 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:462 -> [UART, PM25] Reading data...
19:53:08:463 -> [UART, PM25] Data not available.
19:53:08:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:463 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:463 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:483 -> [UART, PM25] Reading data...
19:53:08:484 -> [UART, PM25] Data not available.
19:53:08:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:484 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:484 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:504 -> [UART, PM25] Reading data...
19:53:08:504 -> [UART, PM25] Data not available.
19:53:08:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:505 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:505 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:525 -> [UART, PM25] Reading data...
19:53:08:530 -> [UART, PM25] Data not available.
19:53:08:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:530 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:530 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:546 -> [UART, PM25] Reading data...
19:53:08:546 -> [UART, PM25] Data not available.
19:53:08:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:546 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:546 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:567 -> [UART, PM25] Reading data...
19:53:08:568 -> [UART, PM25] Data not available.
19:53:08:568 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:568 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:568 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:568 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:588 -> [UART, PM25] Reading data...
19:53:08:589 -> [UART, PM25] Data not available.
19:53:08:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:589 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:589 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:609 -> [UART, PM25] Reading data...
19:53:08:609 -> [UART, PM25] Data not available.
19:53:08:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:609 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:609 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:630 -> [UART, PM25] Reading data...
19:53:08:630 -> [UART, PM25] Data not available.
19:53:08:630 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:630 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:630 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:630 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:651 -> [UART, PM25] Reading data...
19:53:08:652 -> [UART, PM25] Data not available.
19:53:08:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:652 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:652 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:672 -> [UART, PM25] Reading data...
19:53:08:672 -> [UART, PM25] Data not available.
19:53:08:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:672 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:672 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:693 -> [UART, PM25] Reading data...
19:53:08:694 -> [UART, PM25] Data not available.
19:53:08:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:694 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:694 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:714 -> [UART, PM25] Reading data...
19:53:08:715 -> [UART, PM25] Data not available.
19:53:08:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:715 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:715 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:735 -> [UART, PM25] Reading data...
19:53:08:735 -> [UART, PM25] Data not available.
19:53:08:735 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:735 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:735 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:735 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:756 -> [UART, PM25] Reading data...
19:53:08:757 -> [UART, PM25] Data not available.
19:53:08:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:757 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:757 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:777 -> [UART, PM25] Reading data...
19:53:08:777 -> [UART, PM25] Data not available.
19:53:08:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:777 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:777 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:798 -> [UART, PM25] Reading data...
19:53:08:798 -> [UART, PM25] Data not available.
19:53:08:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:798 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:798 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:819 -> [UART, PM25] Reading data...
19:53:08:819 -> [UART, PM25] Data not available.
19:53:08:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:819 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:819 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:840 -> [UART, PM25] Reading data...
19:53:08:840 -> [UART, PM25] Data not available.
19:53:08:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:841 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:841 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:861 -> [UART, PM25] Reading data...
19:53:08:861 -> [UART, PM25] Data not available.
19:53:08:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:862 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:862 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:892 -> [UART, PM25] Reading data...
19:53:08:893 -> [UART, PM25] Data not available.
19:53:08:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:893 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:893 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:903 -> [UART, PM25] Reading data...
19:53:08:904 -> [UART, PM25] Data not available.
19:53:08:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:904 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:904 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:924 -> [UART, PM25] Reading data...
19:53:08:924 -> [UART, PM25] Data not available.
19:53:08:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:925 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:925 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:945 -> [UART, PM25] Reading data...
19:53:08:945 -> [UART, PM25] Data not available.
19:53:08:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:946 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:946 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:966 -> [UART, PM25] Reading data...
19:53:08:967 -> [UART, PM25] Data not available.
19:53:08:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:967 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:967 -> [UART, PM25] Uart available, resetting event queue..
19:53:08:987 -> [UART, PM25] Reading data...
19:53:08:987 -> [UART, PM25] Data not available.
19:53:08:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:08:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:08:988 -> [UART, PM25] Uart available, clearing write errors..
19:53:08:988 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:008 -> [UART, PM25] Reading data...
19:53:09:009 -> [UART, PM25] Data not available.
19:53:09:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:009 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:009 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:029 -> [UART, PM25] Reading data...
19:53:09:029 -> [UART, PM25] Data not available.
19:53:09:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:029 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:029 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:050 -> [UART, PM25] Reading data...
19:53:09:051 -> [UART, PM25] Data not available.
19:53:09:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:051 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:051 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:071 -> [UART, PM25] Reading data...
19:53:09:072 -> [UART, PM25] Data not available.
19:53:09:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:072 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:072 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:092 -> [UART, PM25] Reading data...
19:53:09:093 -> [UART, PM25] Data not available.
19:53:09:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:093 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:093 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:113 -> [UART, PM25] Reading data...
19:53:09:113 -> [UART, PM25] Data not available.
19:53:09:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:114 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:114 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:134 -> [UART, PM25] Reading data...
19:53:09:134 -> [UART, PM25] Data not available.
19:53:09:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:135 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:135 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:179 -> [UART, PM25] Reading data...
19:53:09:184 -> [UART, PM25] Data not available.
19:53:09:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:184 -> [UART, PM25] Reading data...
19:53:09:184 -> [UART, PM25] Data not available.
19:53:09:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:197 -> [UART, PM25] Reading data...
19:53:09:198 -> [UART, PM25] Data not available.
19:53:09:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:198 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:198 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:218 -> [UART, PM25] Reading data...
19:53:09:218 -> [UART, PM25] Data not available.
19:53:09:219 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:219 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:219 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:219 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:239 -> [UART, PM25] Reading data...
19:53:09:240 -> [UART, PM25] Data not available.
19:53:09:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:240 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:240 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:260 -> [UART, PM25] Reading data...
19:53:09:260 -> [UART, PM25] Data not available.
19:53:09:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:260 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:260 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:285 -> [UART, PM25] Reading data...
19:53:09:285 -> [UART, PM25] Data not available.
19:53:09:285 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:285 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:285 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:285 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:302 -> [UART, PM25] Reading data...
19:53:09:303 -> [UART, PM25] Data not available.
19:53:09:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:303 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:303 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:323 -> [UART, PM25] Reading data...
19:53:09:323 -> [UART, PM25] Data not available.
19:53:09:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:324 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:324 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:344 -> [UART, PM25] Reading data...
19:53:09:345 -> [UART, PM25] Data not available.
19:53:09:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:345 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:345 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:365 -> [UART, PM25] Reading data...
19:53:09:365 -> [UART, PM25] Data not available.
19:53:09:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:365 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:365 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:386 -> [UART, PM25] Reading data...
19:53:09:387 -> [UART, PM25] Data not available.
19:53:09:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:387 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:387 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:407 -> [UART, PM25] Reading data...
19:53:09:407 -> [UART, PM25] Data not available.
19:53:09:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:407 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:407 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:428 -> [UART, PM25] Reading data...
19:53:09:428 -> [UART, PM25] Data not available.
19:53:09:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:428 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:428 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:449 -> [UART, PM25] Reading data...
19:53:09:449 -> [UART, PM25] Data not available.
19:53:09:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:450 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:450 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:470 -> [UART, PM25] Reading data...
19:53:09:471 -> [UART, PM25] Data not available.
19:53:09:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:471 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:471 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:491 -> [UART, PM25] Reading data...
19:53:09:491 -> [UART, PM25] Data not available.
19:53:09:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:491 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:491 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:512 -> [UART, PM25] Reading data...
19:53:09:513 -> [UART, PM25] Data not available.
19:53:09:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:513 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:513 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:533 -> [UART, PM25] Reading data...
19:53:09:534 -> [UART, PM25] Data not available.
19:53:09:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:534 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:534 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:554 -> [UART, PM25] Reading data...
19:53:09:554 -> [UART, PM25] Data not available.
19:53:09:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:554 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:554 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:575 -> [UART, PM25] Reading data...
19:53:09:576 -> [UART, PM25] Data not available.
19:53:09:576 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:576 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:576 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:576 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:596 -> [UART, PM25] Reading data...
19:53:09:597 -> [UART, PM25] Data not available.
19:53:09:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:597 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:597 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:617 -> [UART, PM25] Reading data...
19:53:09:617 -> [UART, PM25] Data not available.
19:53:09:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:618 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:618 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:638 -> [UART, PM25] Reading data...
19:53:09:638 -> [UART, PM25] Data not available.
19:53:09:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:638 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:638 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:659 -> [UART, PM25] Reading data...
19:53:09:659 -> [UART, PM25] Data not available.
19:53:09:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:660 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:660 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:680 -> [UART, PM25] Reading data...
19:53:09:680 -> [UART, PM25] Data not available.
19:53:09:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:680 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:680 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:701 -> [UART, PM25] Reading data...
19:53:09:702 -> [UART, PM25] Data not available.
19:53:09:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:702 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:702 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:722 -> [UART, PM25] Reading data...
19:53:09:723 -> [UART, PM25] Data not available.
19:53:09:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:723 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:723 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:743 -> [UART, PM25] Reading data...
19:53:09:743 -> [UART, PM25] Data not available.
19:53:09:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:743 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:743 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:765 -> [UART, PM25] Reading data...
19:53:09:766 -> [UART, PM25] Data not available.
19:53:09:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:766 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:766 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:785 -> [UART, PM25] Reading data...
19:53:09:785 -> [UART, PM25] Data not available.
19:53:09:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:786 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:786 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:806 -> [UART, PM25] Reading data...
19:53:09:806 -> [UART, PM25] Data not available.
19:53:09:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:807 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:807 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:827 -> [UART, PM25] Reading data...
19:53:09:827 -> [UART, PM25] Data not available.
19:53:09:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:828 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:828 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:848 -> [UART, PM25] Reading data...
19:53:09:848 -> [UART, PM25] Data not available.
19:53:09:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:849 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:849 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:870 -> [UART, PM25] Reading data...
19:53:09:870 -> [UART, PM25] Data not available.
19:53:09:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:870 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:870 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:890 -> [UART, PM25] Reading data...
19:53:09:890 -> [UART, PM25] Data not available.
19:53:09:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:890 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:890 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:924 -> [UART, PM25] Reading data...
19:53:09:924 -> [UART, PM25] Data not available.
19:53:09:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:925 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:925 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:932 -> [UART, PM25] Reading data...
19:53:09:932 -> [UART, PM25] Data not available.
19:53:09:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:932 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:932 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:953 -> [UART, PM25] Reading data...
19:53:09:953 -> [UART, PM25] Data not available.
19:53:09:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:954 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:954 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:974 -> [UART, PM25] Reading data...
19:53:09:975 -> [UART, PM25] Data not available.
19:53:09:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:975 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:975 -> [UART, PM25] Uart available, resetting event queue..
19:53:09:995 -> [UART, PM25] Reading data...
19:53:09:995 -> [UART, PM25] Data not available.
19:53:09:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:09:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:09:995 -> [UART, PM25] Uart available, clearing write errors..
19:53:09:995 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:017 -> [UART, PM25] Reading data...
19:53:10:017 -> [UART, PM25] Data not available.
19:53:10:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:023 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:023 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:037 -> [UART, PM25] Reading data...
19:53:10:037 -> [UART, PM25] Data not available.
19:53:10:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:037 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:037 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:058 -> [UART, PM25] Reading data...
19:53:10:058 -> [UART, PM25] Data not available.
19:53:10:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:058 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:058 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:079 -> [UART, PM25] Reading data...
19:53:10:080 -> [UART, PM25] Data not available.
19:53:10:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:080 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:080 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:100 -> [UART, PM25] Reading data...
19:53:10:100 -> [UART, PM25] Data not available.
19:53:10:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:100 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:100 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:121 -> [UART, PM25] Reading data...
19:53:10:121 -> [UART, PM25] Data not available.
19:53:10:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:122 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:122 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:142 -> [UART, PM25] Reading data...
19:53:10:142 -> [UART, PM25] Data not available.
19:53:10:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:142 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:142 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:163 -> [UART, PM25] Reading data...
19:53:10:163 -> [UART, PM25] Data not available.
19:53:10:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:163 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:163 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:184 -> [UART, PM25] Reading data...
19:53:10:184 -> [UART, PM25] Data not available.
19:53:10:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:205 -> [UART, PM25] Reading data...
19:53:10:206 -> [UART, PM25] Data not available.
19:53:10:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:206 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:206 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:226 -> [UART, PM25] Reading data...
19:53:10:226 -> [UART, PM25] Data not available.
19:53:10:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:227 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:227 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:247 -> [UART, PM25] Reading data...
19:53:10:247 -> [UART, PM25] Data not available.
19:53:10:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:247 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:247 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:268 -> [UART, PM25] Reading data...
19:53:10:268 -> [UART, PM25] Data not available.
19:53:10:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:269 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:269 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:289 -> [UART, PM25] Reading data...
19:53:10:289 -> [UART, PM25] Data not available.
19:53:10:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:289 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:289 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:310 -> [UART, PM25] Reading data...
19:53:10:310 -> [UART, PM25] Data not available.
19:53:10:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:310 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:310 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:331 -> [UART, PM25] Reading data...
19:53:10:331 -> [UART, PM25] Data not available.
19:53:10:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:332 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:332 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:352 -> [UART, PM25] Reading data...
19:53:10:352 -> [UART, PM25] Data not available.
19:53:10:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:352 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:352 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:373 -> [UART, PM25] Reading data...
19:53:10:373 -> [UART, PM25] Data not available.
19:53:10:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:373 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:373 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:394 -> [UART, PM25] Reading data...
19:53:10:394 -> [UART, PM25] Data not available.
19:53:10:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:395 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:395 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:415 -> [UART, PM25] Reading data...
19:53:10:416 -> [UART, PM25] Data not available.
19:53:10:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:416 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:416 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:447 -> [UART, PM25] Reading data...
19:53:10:447 -> [UART, PM25] Data not available.
19:53:10:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:447 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:447 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:457 -> [UART, PM25] Reading data...
19:53:10:457 -> [UART, PM25] Data not available.
19:53:10:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:458 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:458 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:478 -> [UART, PM25] Reading data...
19:53:10:478 -> [UART, PM25] Data not available.
19:53:10:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:478 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:478 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:499 -> [UART, PM25] Reading data...
19:53:10:499 -> [UART, PM25] Data not available.
19:53:10:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:499 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:499 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:520 -> [UART, PM25] Reading data...
19:53:10:520 -> [UART, PM25] Data not available.
19:53:10:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:520 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:520 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:541 -> [UART, PM25] Reading data...
19:53:10:541 -> [UART, PM25] Data not available.
19:53:10:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:542 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:542 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:562 -> [UART, PM25] Reading data...
19:53:10:562 -> [UART, PM25] Data not available.
19:53:10:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:562 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:562 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:583 -> [UART, PM25] Reading data...
19:53:10:583 -> [UART, PM25] Data not available.
19:53:10:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:584 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:584 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:604 -> [UART, PM25] Reading data...
19:53:10:605 -> [UART, PM25] Data not available.
19:53:10:605 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:605 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:605 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:605 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:625 -> [UART, PM25] Reading data...
19:53:10:625 -> [UART, PM25] Data not available.
19:53:10:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:626 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:626 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:646 -> [UART, PM25] Reading data...
19:53:10:646 -> [UART, PM25] Data not available.
19:53:10:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:647 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:647 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:667 -> [UART, PM25] Reading data...
19:53:10:667 -> [UART, PM25] Data not available.
19:53:10:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:667 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:667 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:688 -> [UART, PM25] Reading data...
19:53:10:689 -> [UART, PM25] Data not available.
19:53:10:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:689 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:689 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:709 -> [UART, PM25] Reading data...
19:53:10:709 -> [UART, PM25] Data not available.
19:53:10:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:709 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:709 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:730 -> [UART, PM25] Reading data...
19:53:10:730 -> [UART, PM25] Data not available.
19:53:10:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:731 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:731 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:751 -> [UART, PM25] Reading data...
19:53:10:751 -> [UART, PM25] Data not available.
19:53:10:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:751 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:751 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:772 -> [UART, PM25] Reading data...
19:53:10:773 -> [UART, PM25] Data not available.
19:53:10:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:773 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:773 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:793 -> [UART, PM25] Reading data...
19:53:10:793 -> [UART, PM25] Data not available.
19:53:10:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:793 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:793 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:814 -> [UART, PM25] Reading data...
19:53:10:814 -> [UART, PM25] Data not available.
19:53:10:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:814 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:814 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:835 -> [UART, PM25] Reading data...
19:53:10:836 -> [UART, PM25] Data not available.
19:53:10:836 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:836 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:836 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:836 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:856 -> [UART, PM25] Reading data...
19:53:10:857 -> [UART, PM25] Data not available.
19:53:10:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:857 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:857 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:877 -> [UART, PM25] Reading data...
19:53:10:877 -> [UART, PM25] Data not available.
19:53:10:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:877 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:877 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:922 -> [UART, PM25] Reading data...
19:53:10:938 -> [UART, PM25] Data not available.
19:53:10:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:938 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:938 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:938 -> [UART, PM25] Reading data...
19:53:10:938 -> [UART, PM25] Data not available.
19:53:10:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:938 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:938 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:940 -> [UART, PM25] Reading data...
19:53:10:940 -> [UART, PM25] Data not available.
19:53:10:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:941 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:941 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:972 -> [UART, PM25] Reading data...
19:53:10:972 -> [UART, PM25] Data not available.
19:53:10:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:972 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:972 -> [UART, PM25] Uart available, resetting event queue..
19:53:10:982 -> [UART, PM25] Reading data...
19:53:10:982 -> [UART, PM25] Data not available.
19:53:10:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:10:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:10:982 -> [UART, PM25] Uart available, clearing write errors..
19:53:10:982 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:003 -> [UART, PM25] Reading data...
19:53:11:003 -> [UART, PM25] Data not available.
19:53:11:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:003 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:003 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:026 -> [UART, PM25] Reading data...
19:53:11:027 -> [UART, PM25] Data not available.
19:53:11:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:027 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:027 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:045 -> [UART, PM25] Reading data...
19:53:11:045 -> [UART, PM25] Data not available.
19:53:11:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:045 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:045 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:066 -> [UART, PM25] Reading data...
19:53:11:066 -> [UART, PM25] Data not available.
19:53:11:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:066 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:066 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:087 -> [UART, PM25] Reading data...
19:53:11:087 -> [UART, PM25] Data not available.
19:53:11:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:087 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:087 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:108 -> [UART, PM25] Reading data...
19:53:11:108 -> [UART, PM25] Data not available.
19:53:11:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:108 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:108 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:129 -> [UART, PM25] Reading data...
19:53:11:129 -> [UART, PM25] Data not available.
19:53:11:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:129 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:129 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:150 -> [UART, PM25] Reading data...
19:53:11:150 -> [UART, PM25] Data not available.
19:53:11:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:151 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:151 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:171 -> [UART, PM25] Reading data...
19:53:11:171 -> [UART, PM25] Data not available.
19:53:11:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:171 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:171 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:192 -> [UART, PM25] Reading data...
19:53:11:193 -> [UART, PM25] Data not available.
19:53:11:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:193 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:193 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:213 -> [UART, PM25] Reading data...
19:53:11:213 -> [UART, PM25] Data not available.
19:53:11:213 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:213 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:213 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:213 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:236 -> [UART, PM25] Reading data...
19:53:11:236 -> [UART, PM25] Data not available.
19:53:11:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:236 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:236 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:255 -> [UART, PM25] Reading data...
19:53:11:256 -> [UART, PM25] Data not available.
19:53:11:256 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:256 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:256 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:256 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:276 -> [UART, PM25] Reading data...
19:53:11:276 -> [UART, PM25] Data not available.
19:53:11:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:276 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:276 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:297 -> [UART, PM25] Reading data...
19:53:11:297 -> [UART, PM25] Data not available.
19:53:11:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:297 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:297 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:318 -> [UART, PM25] Reading data...
19:53:11:318 -> [UART, PM25] Data not available.
19:53:11:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:318 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:318 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:341 -> [UART, PM25] Reading data...
19:53:11:341 -> [UART, PM25] Data not available.
19:53:11:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:341 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:341 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:360 -> [UART, PM25] Reading data...
19:53:11:360 -> [UART, PM25] Data not available.
19:53:11:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:360 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:360 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:381 -> [UART, PM25] Reading data...
19:53:11:381 -> [UART, PM25] Data not available.
19:53:11:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:381 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:381 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:402 -> [UART, PM25] Reading data...
19:53:11:403 -> [UART, PM25] Data not available.
19:53:11:403 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:403 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:403 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:403 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:423 -> [UART, PM25] Reading data...
19:53:11:424 -> [UART, PM25] Data not available.
19:53:11:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:424 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:424 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:444 -> [UART, PM25] Reading data...
19:53:11:445 -> [UART, PM25] Data not available.
19:53:11:445 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:445 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:445 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:445 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:465 -> [UART, PM25] Reading data...
19:53:11:466 -> [UART, PM25] Data not available.
19:53:11:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:466 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:466 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:490 -> [UART, PM25] Reading data...
19:53:11:490 -> [UART, PM25] Data not available.
19:53:11:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:490 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:490 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:507 -> [UART, PM25] Reading data...
19:53:11:507 -> [UART, PM25] Data not available.
19:53:11:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:507 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:507 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:528 -> [UART, PM25] Reading data...
19:53:11:528 -> [UART, PM25] Data not available.
19:53:11:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:529 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:529 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:549 -> [UART, PM25] Reading data...
19:53:11:550 -> [UART, PM25] Data not available.
19:53:11:550 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:550 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:550 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:550 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:570 -> [UART, PM25] Reading data...
19:53:11:570 -> [UART, PM25] Data not available.
19:53:11:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:570 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:570 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:591 -> [UART, PM25] Reading data...
19:53:11:591 -> [UART, PM25] Data not available.
19:53:11:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:591 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:591 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:612 -> [UART, PM25] Reading data...
19:53:11:612 -> [UART, PM25] Data not available.
19:53:11:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:613 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:613 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:633 -> [UART, PM25] Reading data...
19:53:11:634 -> [UART, PM25] Data not available.
19:53:11:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:634 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:634 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:654 -> [UART, PM25] Reading data...
19:53:11:654 -> [UART, PM25] Data not available.
19:53:11:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:654 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:654 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:675 -> [UART, PM25] Reading data...
19:53:11:675 -> [UART, PM25] Data not available.
19:53:11:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:675 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:675 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:696 -> [UART, PM25] Reading data...
19:53:11:696 -> [UART, PM25] Data not available.
19:53:11:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:696 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:696 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:717 -> [UART, PM25] Reading data...
19:53:11:718 -> [UART, PM25] Data not available.
19:53:11:718 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:718 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:718 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:718 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:738 -> [UART, PM25] Reading data...
19:53:11:739 -> [UART, PM25] Data not available.
19:53:11:739 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:739 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:739 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:739 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:759 -> [UART, PM25] Reading data...
19:53:11:760 -> [UART, PM25] Data not available.
19:53:11:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:760 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:760 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:780 -> [UART, PM25] Reading data...
19:53:11:780 -> [UART, PM25] Data not available.
19:53:11:781 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:781 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:781 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:781 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:801 -> [UART, PM25] Reading data...
19:53:11:801 -> [UART, PM25] Data not available.
19:53:11:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:801 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:801 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:822 -> [UART, PM25] Reading data...
19:53:11:822 -> [UART, PM25] Data not available.
19:53:11:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:822 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:822 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:843 -> [UART, PM25] Reading data...
19:53:11:843 -> [UART, PM25] Data not available.
19:53:11:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:843 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:843 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:864 -> [UART, PM25] Reading data...
19:53:11:865 -> [UART, PM25] Data not available.
19:53:11:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:865 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:865 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:885 -> [UART, PM25] Reading data...
19:53:11:885 -> [UART, PM25] Data not available.
19:53:11:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:885 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:885 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:906 -> [UART, PM25] Reading data...
19:53:11:906 -> [UART, PM25] Data not available.
19:53:11:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:906 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:906 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:927 -> [UART, PM25] Reading data...
19:53:11:927 -> [UART, PM25] Data not available.
19:53:11:928 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:928 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:928 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:928 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:948 -> [UART, PM25] Reading data...
19:53:11:948 -> [UART, PM25] Data not available.
19:53:11:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:949 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:949 -> [UART, PM25] Uart available, resetting event queue..
19:53:11:969 -> [UART, PM25] Reading data...
19:53:11:969 -> [UART, PM25] Data not available.
19:53:11:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:11:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:11:969 -> [UART, PM25] Uart available, clearing write errors..
19:53:11:969 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:001 -> [UART, PM25] Reading data...
19:53:12:002 -> [UART, PM25] Data not available.
19:53:12:002 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:002 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:002 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:002 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:011 -> [UART, PM25] Reading data...
19:53:12:011 -> [UART, PM25] Data not available.
19:53:12:011 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:011 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:011 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:011 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:032 -> [UART, PM25] Reading data...
19:53:12:032 -> [UART, PM25] Data not available.
19:53:12:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:032 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:032 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:053 -> [UART, PM25] Reading data...
19:53:12:053 -> [UART, PM25] Data not available.
19:53:12:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:054 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:054 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:074 -> [UART, PM25] Reading data...
19:53:12:074 -> [UART, PM25] Data not available.
19:53:12:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:075 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:075 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:095 -> [UART, PM25] Reading data...
19:53:12:096 -> [UART, PM25] Data not available.
19:53:12:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:096 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:096 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:119 -> [UART, PM25] Reading data...
19:53:12:120 -> [UART, PM25] Data not available.
19:53:12:120 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:120 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:120 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:120 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:137 -> [UART, PM25] Reading data...
19:53:12:137 -> [UART, PM25] Data not available.
19:53:12:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:137 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:137 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:158 -> [UART, PM25] Reading data...
19:53:12:158 -> [UART, PM25] Data not available.
19:53:12:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:158 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:158 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:179 -> [UART, PM25] Reading data...
19:53:12:179 -> [UART, PM25] Data not available.
19:53:12:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:180 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:180 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:180 -> PING!
19:53:12:403 -> [UART, PM25] Reading data...
19:53:12:403 -> [UART, PM25] Data not available.
19:53:12:404 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:404 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:404 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:404 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:424 -> [UART, PM25] Reading data...
19:53:12:425 -> [UART, PM25] Data not available.
19:53:12:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:425 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:425 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:445 -> [UART, PM25] Reading data...
19:53:12:445 -> [UART, PM25] Data not available.
19:53:12:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:446 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:446 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:466 -> [UART, PM25] Reading data...
19:53:12:466 -> [UART, PM25] Data not available.
19:53:12:466 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:466 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:466 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:466 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:487 -> [UART, PM25] Reading data...
19:53:12:487 -> [UART, PM25] Data not available.
19:53:12:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:488 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:488 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:512 -> [UART, PM25] Reading data...
19:53:12:512 -> [UART, PM25] Data not available.
19:53:12:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:513 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:513 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:529 -> [UART, PM25] Reading data...
19:53:12:529 -> [UART, PM25] Data not available.
19:53:12:529 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:529 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:529 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:529 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:550 -> [UART, PM25] Reading data...
19:53:12:551 -> [UART, PM25] Data not available.
19:53:12:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:551 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:551 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:571 -> [UART, PM25] Reading data...
19:53:12:571 -> [UART, PM25] Data not available.
19:53:12:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:572 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:572 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:592 -> [UART, PM25] Reading data...
19:53:12:592 -> [UART, PM25] Data not available.
19:53:12:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:593 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:593 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:613 -> [UART, PM25] Reading data...
19:53:12:614 -> [UART, PM25] Data not available.
19:53:12:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:614 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:614 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:634 -> [UART, PM25] Reading data...
19:53:12:634 -> [UART, PM25] Data not available.
19:53:12:634 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:634 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:634 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:634 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:655 -> [UART, PM25] Reading data...
19:53:12:656 -> [UART, PM25] Data not available.
19:53:12:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:656 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:656 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:676 -> [UART, PM25] Reading data...
19:53:12:676 -> [UART, PM25] Data not available.
19:53:12:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:677 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:677 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:697 -> [UART, PM25] Reading data...
19:53:12:698 -> [UART, PM25] Data not available.
19:53:12:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:698 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:698 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:718 -> [UART, PM25] Reading data...
19:53:12:719 -> [UART, PM25] Data not available.
19:53:12:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:719 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:719 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:739 -> [UART, PM25] Reading data...
19:53:12:739 -> [UART, PM25] Data not available.
19:53:12:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:740 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:740 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:760 -> [UART, PM25] Reading data...
19:53:12:760 -> [UART, PM25] Data not available.
19:53:12:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:760 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:760 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:781 -> [UART, PM25] Reading data...
19:53:12:781 -> [UART, PM25] Data not available.
19:53:12:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:782 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:782 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:802 -> [UART, PM25] Reading data...
19:53:12:802 -> [UART, PM25] Data not available.
19:53:12:802 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:802 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:802 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:802 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:823 -> [UART, PM25] Reading data...
19:53:12:823 -> [UART, PM25] Data not available.
19:53:12:823 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:823 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:823 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:823 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:844 -> [UART, PM25] Reading data...
19:53:12:844 -> [UART, PM25] Data not available.
19:53:12:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:845 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:845 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:865 -> [UART, PM25] Reading data...
19:53:12:865 -> [UART, PM25] Data not available.
19:53:12:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:865 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:865 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:886 -> [UART, PM25] Reading data...
19:53:12:886 -> [UART, PM25] Data not available.
19:53:12:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:887 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:887 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:926 -> [UART, PM25] Reading data...
19:53:12:939 -> [UART, PM25] Data not available.
19:53:12:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:939 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:939 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:939 -> [UART, PM25] Reading data...
19:53:12:939 -> [UART, PM25] Data not available.
19:53:12:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:939 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:939 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:949 -> [UART, PM25] Reading data...
19:53:12:949 -> [UART, PM25] Data not available.
19:53:12:949 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:949 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:949 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:949 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:970 -> [UART, PM25] Reading data...
19:53:12:970 -> [UART, PM25] Data not available.
19:53:12:970 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:970 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:970 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:970 -> [UART, PM25] Uart available, resetting event queue..
19:53:12:991 -> [UART, PM25] Reading data...
19:53:12:991 -> [UART, PM25] Data not available.
19:53:12:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:12:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:12:991 -> [UART, PM25] Uart available, clearing write errors..
19:53:12:991 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:022 -> [UART, PM25] Reading data...
19:53:13:023 -> [UART, PM25] Data not available.
19:53:13:023 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:023 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:023 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:023 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:033 -> [UART, PM25] Reading data...
19:53:13:033 -> [UART, PM25] Data not available.
19:53:13:033 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:033 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:033 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:033 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:054 -> [UART, PM25] Reading data...
19:53:13:054 -> [UART, PM25] Data not available.
19:53:13:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:054 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:054 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:075 -> [UART, PM25] Reading data...
19:53:13:075 -> [UART, PM25] Data not available.
19:53:13:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:075 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:075 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:096 -> [UART, PM25] Reading data...
19:53:13:096 -> [UART, PM25] Data not available.
19:53:13:097 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:097 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:097 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:097 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:117 -> [UART, PM25] Reading data...
19:53:13:117 -> [UART, PM25] Data not available.
19:53:13:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:117 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:117 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:138 -> [UART, PM25] Reading data...
19:53:13:139 -> [UART, PM25] Data not available.
19:53:13:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:139 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:139 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:159 -> [UART, PM25] Reading data...
19:53:13:160 -> [UART, PM25] Data not available.
19:53:13:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:160 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:160 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:180 -> [UART, PM25] Reading data...
19:53:13:180 -> [UART, PM25] Data not available.
19:53:13:180 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:180 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:180 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:180 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:203 -> [UART, PM25] Reading data...
19:53:13:203 -> [UART, PM25] Data not available.
19:53:13:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:203 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:203 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:222 -> [UART, PM25] Reading data...
19:53:13:222 -> [UART, PM25] Data not available.
19:53:13:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:222 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:222 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:243 -> [UART, PM25] Reading data...
19:53:13:243 -> [UART, PM25] Data not available.
19:53:13:243 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:243 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:243 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:243 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:264 -> [UART, PM25] Reading data...
19:53:13:264 -> [UART, PM25] Data not available.
19:53:13:264 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:264 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:264 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:264 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:285 -> [UART, PM25] Reading data...
19:53:13:286 -> [UART, PM25] Data not available.
19:53:13:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:286 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:286 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:306 -> [UART, PM25] Reading data...
19:53:13:306 -> [UART, PM25] Data not available.
19:53:13:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:307 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:307 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:327 -> [UART, PM25] Reading data...
19:53:13:327 -> [UART, PM25] Data not available.
19:53:13:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:328 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:328 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:348 -> [UART, PM25] Reading data...
19:53:13:348 -> [UART, PM25] Data not available.
19:53:13:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:349 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:349 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:369 -> [UART, PM25] Reading data...
19:53:13:369 -> [UART, PM25] Data not available.
19:53:13:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:369 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:369 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:390 -> [UART, PM25] Reading data...
19:53:13:390 -> [UART, PM25] Data not available.
19:53:13:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:391 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:391 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:411 -> [UART, PM25] Reading data...
19:53:13:412 -> [UART, PM25] Data not available.
19:53:13:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:412 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:412 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:432 -> [UART, PM25] Reading data...
19:53:13:432 -> [UART, PM25] Data not available.
19:53:13:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:433 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:433 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:453 -> [UART, PM25] Reading data...
19:53:13:453 -> [UART, PM25] Data not available.
19:53:13:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:454 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:454 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:474 -> [UART, PM25] Reading data...
19:53:13:474 -> [UART, PM25] Data not available.
19:53:13:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:474 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:474 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:495 -> [UART, PM25] Reading data...
19:53:13:495 -> [UART, PM25] Data not available.
19:53:13:495 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:495 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:495 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:495 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:516 -> [UART, PM25] Reading data...
19:53:13:517 -> [UART, PM25] Data not available.
19:53:13:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:517 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:517 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:537 -> [UART, PM25] Reading data...
19:53:13:537 -> [UART, PM25] Data not available.
19:53:13:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:538 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:538 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:558 -> [UART, PM25] Reading data...
19:53:13:558 -> [UART, PM25] Data not available.
19:53:13:558 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:558 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:558 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:558 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:579 -> [UART, PM25] Reading data...
19:53:13:579 -> [UART, PM25] Data not available.
19:53:13:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:579 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:579 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:600 -> [UART, PM25] Reading data...
19:53:13:600 -> [UART, PM25] Data not available.
19:53:13:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:601 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:601 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:621 -> [UART, PM25] Reading data...
19:53:13:622 -> [UART, PM25] Data not available.
19:53:13:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:622 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:622 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:642 -> [UART, PM25] Reading data...
19:53:13:642 -> [UART, PM25] Data not available.
19:53:13:642 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:642 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:642 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:642 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:663 -> [UART, PM25] Reading data...
19:53:13:663 -> [UART, PM25] Data not available.
19:53:13:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:663 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:663 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:684 -> [UART, PM25] Reading data...
19:53:13:684 -> [UART, PM25] Data not available.
19:53:13:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:684 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:684 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:705 -> [UART, PM25] Reading data...
19:53:13:705 -> [UART, PM25] Data not available.
19:53:13:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:706 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:706 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:726 -> [UART, PM25] Reading data...
19:53:13:726 -> [UART, PM25] Data not available.
19:53:13:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:726 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:726 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:747 -> [UART, PM25] Reading data...
19:53:13:747 -> [UART, PM25] Data not available.
19:53:13:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:747 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:747 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:768 -> [UART, PM25] Reading data...
19:53:13:768 -> [UART, PM25] Data not available.
19:53:13:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:769 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:769 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:789 -> [UART, PM25] Reading data...
19:53:13:789 -> [UART, PM25] Data not available.
19:53:13:789 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:789 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:789 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:789 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:810 -> [UART, PM25] Reading data...
19:53:13:810 -> [UART, PM25] Data not available.
19:53:13:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:811 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:811 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:831 -> [UART, PM25] Reading data...
19:53:13:831 -> [UART, PM25] Data not available.
19:53:13:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:831 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:831 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:852 -> [UART, PM25] Reading data...
19:53:13:853 -> [UART, PM25] Data not available.
19:53:13:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:853 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:853 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:873 -> [UART, PM25] Reading data...
19:53:13:873 -> [UART, PM25] Data not available.
19:53:13:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:873 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:873 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:894 -> [UART, PM25] Reading data...
19:53:13:894 -> [UART, PM25] Data not available.
19:53:13:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:894 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:894 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:915 -> [UART, PM25] Reading data...
19:53:13:916 -> [UART, PM25] Data not available.
19:53:13:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:916 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:916 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:936 -> [UART, PM25] Reading data...
19:53:13:936 -> [UART, PM25] Data not available.
19:53:13:936 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:936 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:936 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:936 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:957 -> [UART, PM25] Reading data...
19:53:13:958 -> [UART, PM25] Data not available.
19:53:13:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:958 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:958 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:978 -> [UART, PM25] Reading data...
19:53:13:978 -> [UART, PM25] Data not available.
19:53:13:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:13:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:13:978 -> [UART, PM25] Uart available, clearing write errors..
19:53:13:978 -> [UART, PM25] Uart available, resetting event queue..
19:53:13:999 -> [UART, PM25] Reading data...
19:53:13:999 -> [UART, PM25] Data not available.
19:53:14:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:000 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:000 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:021 -> [UART, PM25] Reading data...
19:53:14:022 -> [UART, PM25] Data not available.
19:53:14:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:022 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:022 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:053 -> [UART, PM25] Reading data...
19:53:14:053 -> [UART, PM25] Data not available.
19:53:14:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:054 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:054 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:063 -> [UART, PM25] Reading data...
19:53:14:063 -> [UART, PM25] Data not available.
19:53:14:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:063 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:063 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:084 -> [UART, PM25] Reading data...
19:53:14:085 -> [UART, PM25] Data not available.
19:53:14:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:085 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:085 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:105 -> [UART, PM25] Reading data...
19:53:14:105 -> [UART, PM25] Data not available.
19:53:14:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:105 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:105 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:126 -> [UART, PM25] Reading data...
19:53:14:126 -> [UART, PM25] Data not available.
19:53:14:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:127 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:127 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:147 -> [UART, PM25] Reading data...
19:53:14:148 -> [UART, PM25] Data not available.
19:53:14:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:148 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:148 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:168 -> [UART, PM25] Reading data...
19:53:14:168 -> [UART, PM25] Data not available.
19:53:14:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:168 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:168 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:189 -> [UART, PM25] Reading data...
19:53:14:189 -> [UART, PM25] Data not available.
19:53:14:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:189 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:189 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:210 -> [UART, PM25] Reading data...
19:53:14:210 -> [UART, PM25] Data not available.
19:53:14:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:210 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:210 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:231 -> [UART, PM25] Reading data...
19:53:14:232 -> [UART, PM25] Data not available.
19:53:14:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:232 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:232 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:252 -> [UART, PM25] Reading data...
19:53:14:252 -> [UART, PM25] Data not available.
19:53:14:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:252 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:252 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:273 -> [UART, PM25] Reading data...
19:53:14:274 -> [UART, PM25] Data not available.
19:53:14:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:274 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:274 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:294 -> [UART, PM25] Reading data...
19:53:14:294 -> [UART, PM25] Data not available.
19:53:14:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:294 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:294 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:315 -> [UART, PM25] Reading data...
19:53:14:316 -> [UART, PM25] Data not available.
19:53:14:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:316 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:316 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:336 -> [UART, PM25] Reading data...
19:53:14:336 -> [UART, PM25] Data not available.
19:53:14:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:337 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:337 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:357 -> [UART, PM25] Reading data...
19:53:14:357 -> [UART, PM25] Data not available.
19:53:14:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:357 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:357 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:378 -> [UART, PM25] Reading data...
19:53:14:378 -> [UART, PM25] Data not available.
19:53:14:379 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:379 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:379 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:379 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:399 -> [UART, PM25] Reading data...
19:53:14:399 -> [UART, PM25] Data not available.
19:53:14:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:399 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:399 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:422 -> [UART, PM25] Reading data...
19:53:14:423 -> [UART, PM25] Data not available.
19:53:14:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:423 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:423 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:441 -> [UART, PM25] Reading data...
19:53:14:442 -> [UART, PM25] Data not available.
19:53:14:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:442 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:442 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:462 -> [UART, PM25] Reading data...
19:53:14:462 -> [UART, PM25] Data not available.
19:53:14:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:463 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:463 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:485 -> [UART, PM25] Reading data...
19:53:14:485 -> [UART, PM25] Data not available.
19:53:14:485 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:485 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:485 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:485 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:504 -> [UART, PM25] Reading data...
19:53:14:504 -> [UART, PM25] Data not available.
19:53:14:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:504 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:504 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:525 -> [UART, PM25] Reading data...
19:53:14:526 -> [UART, PM25] Data not available.
19:53:14:526 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:526 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:526 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:526 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:546 -> [UART, PM25] Reading data...
19:53:14:546 -> [UART, PM25] Data not available.
19:53:14:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:546 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:546 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:576 -> [UART, PM25] Reading data...
19:53:14:576 -> [UART, PM25] Data not available.
19:53:14:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:577 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:577 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:589 -> [UART, PM25] Reading data...
19:53:14:590 -> [UART, PM25] Data not available.
19:53:14:590 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:590 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:590 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:590 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:609 -> [UART, PM25] Reading data...
19:53:14:609 -> [UART, PM25] Data not available.
19:53:14:609 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:609 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:609 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:609 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:643 -> [UART, PM25] Reading data...
19:53:14:644 -> [UART, PM25] Data not available.
19:53:14:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:644 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:644 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:657 -> [UART, PM25] Reading data...
19:53:14:657 -> [UART, PM25] Data not available.
19:53:14:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:657 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:657 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:672 -> [UART, PM25] Reading data...
19:53:14:672 -> [UART, PM25] Data not available.
19:53:14:672 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:672 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:672 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:672 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:693 -> [UART, PM25] Reading data...
19:53:14:693 -> [UART, PM25] Data not available.
19:53:14:693 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:693 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:693 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:693 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:714 -> [UART, PM25] Reading data...
19:53:14:715 -> [UART, PM25] Data not available.
19:53:14:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:715 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:715 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:735 -> [UART, PM25] Reading data...
19:53:14:736 -> [UART, PM25] Data not available.
19:53:14:736 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:736 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:736 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:736 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:756 -> [UART, PM25] Reading data...
19:53:14:756 -> [UART, PM25] Data not available.
19:53:14:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:757 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:757 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:777 -> [UART, PM25] Reading data...
19:53:14:777 -> [UART, PM25] Data not available.
19:53:14:777 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:777 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:777 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:777 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:798 -> [UART, PM25] Reading data...
19:53:14:798 -> [UART, PM25] Data not available.
19:53:14:798 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:798 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:798 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:798 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:819 -> [UART, PM25] Reading data...
19:53:14:819 -> [UART, PM25] Data not available.
19:53:14:819 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:819 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:819 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:819 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:840 -> [UART, PM25] Reading data...
19:53:14:840 -> [UART, PM25] Data not available.
19:53:14:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:841 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:841 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:861 -> [UART, PM25] Reading data...
19:53:14:861 -> [UART, PM25] Data not available.
19:53:14:862 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:862 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:862 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:862 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:882 -> [UART, PM25] Reading data...
19:53:14:883 -> [UART, PM25] Data not available.
19:53:14:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:883 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:883 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:903 -> [UART, PM25] Reading data...
19:53:14:903 -> [UART, PM25] Data not available.
19:53:14:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:903 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:903 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:924 -> [UART, PM25] Reading data...
19:53:14:924 -> [UART, PM25] Data not available.
19:53:14:924 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:924 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:924 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:924 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:945 -> [UART, PM25] Reading data...
19:53:14:945 -> [UART, PM25] Data not available.
19:53:14:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:946 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:946 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:966 -> [UART, PM25] Reading data...
19:53:14:966 -> [UART, PM25] Data not available.
19:53:14:966 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:966 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:966 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:966 -> [UART, PM25] Uart available, resetting event queue..
19:53:14:987 -> [UART, PM25] Reading data...
19:53:14:988 -> [UART, PM25] Data not available.
19:53:14:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:14:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:14:988 -> [UART, PM25] Uart available, clearing write errors..
19:53:14:988 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:008 -> [UART, PM25] Reading data...
19:53:15:008 -> [UART, PM25] Data not available.
19:53:15:008 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:008 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:008 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:008 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:029 -> [UART, PM25] Reading data...
19:53:15:029 -> [UART, PM25] Data not available.
19:53:15:029 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:029 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:029 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:029 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:050 -> [UART, PM25] Reading data...
19:53:15:050 -> [UART, PM25] Data not available.
19:53:15:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:051 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:051 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:071 -> [UART, PM25] Reading data...
19:53:15:071 -> [UART, PM25] Data not available.
19:53:15:071 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:071 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:071 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:071 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:098 -> [UART, PM25] Reading data...
19:53:15:098 -> [UART, PM25] Data not available.
19:53:15:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:099 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:099 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:113 -> [UART, PM25] Reading data...
19:53:15:113 -> [UART, PM25] Data not available.
19:53:15:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:113 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:113 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:134 -> [UART, PM25] Reading data...
19:53:15:135 -> [UART, PM25] Data not available.
19:53:15:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:135 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:135 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:155 -> [UART, PM25] Reading data...
19:53:15:156 -> [UART, PM25] Data not available.
19:53:15:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:156 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:156 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:176 -> [UART, PM25] Reading data...
19:53:15:176 -> [UART, PM25] Data not available.
19:53:15:176 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:176 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:176 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:176 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:197 -> [UART, PM25] Reading data...
19:53:15:198 -> [UART, PM25] Data not available.
19:53:15:198 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:198 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:198 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:198 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:218 -> [UART, PM25] Reading data...
19:53:15:218 -> [UART, PM25] Data not available.
19:53:15:218 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:218 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:218 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:218 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:239 -> [UART, PM25] Reading data...
19:53:15:239 -> [UART, PM25] Data not available.
19:53:15:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:240 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:240 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:260 -> [UART, PM25] Reading data...
19:53:15:260 -> [UART, PM25] Data not available.
19:53:15:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:261 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:261 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:281 -> [UART, PM25] Reading data...
19:53:15:281 -> [UART, PM25] Data not available.
19:53:15:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:281 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:281 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:302 -> [UART, PM25] Reading data...
19:53:15:303 -> [UART, PM25] Data not available.
19:53:15:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:303 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:303 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:323 -> [UART, PM25] Reading data...
19:53:15:324 -> [UART, PM25] Data not available.
19:53:15:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:324 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:324 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:344 -> [UART, PM25] Reading data...
19:53:15:344 -> [UART, PM25] Data not available.
19:53:15:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:345 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:345 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:365 -> [UART, PM25] Reading data...
19:53:15:366 -> [UART, PM25] Data not available.
19:53:15:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:366 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:366 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:386 -> [UART, PM25] Reading data...
19:53:15:386 -> [UART, PM25] Data not available.
19:53:15:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:386 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:386 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:407 -> [UART, PM25] Reading data...
19:53:15:407 -> [UART, PM25] Data not available.
19:53:15:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:407 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:407 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:428 -> [UART, PM25] Reading data...
19:53:15:429 -> [UART, PM25] Data not available.
19:53:15:429 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:429 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:429 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:429 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:449 -> [UART, PM25] Reading data...
19:53:15:450 -> [UART, PM25] Data not available.
19:53:15:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:450 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:450 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:470 -> [UART, PM25] Reading data...
19:53:15:471 -> [UART, PM25] Data not available.
19:53:15:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:471 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:471 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:491 -> [UART, PM25] Reading data...
19:53:15:492 -> [UART, PM25] Data not available.
19:53:15:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:492 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:492 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:512 -> [UART, PM25] Reading data...
19:53:15:512 -> [UART, PM25] Data not available.
19:53:15:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:512 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:512 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:533 -> [UART, PM25] Reading data...
19:53:15:533 -> [UART, PM25] Data not available.
19:53:15:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:533 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:533 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:554 -> [UART, PM25] Reading data...
19:53:15:555 -> [UART, PM25] Data not available.
19:53:15:555 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:555 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:555 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:555 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:575 -> [UART, PM25] Reading data...
19:53:15:575 -> [UART, PM25] Data not available.
19:53:15:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:575 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:575 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:596 -> [UART, PM25] Reading data...
19:53:15:596 -> [UART, PM25] Data not available.
19:53:15:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:596 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:596 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:618 -> [UART, PM25] Reading data...
19:53:15:619 -> [UART, PM25] Data not available.
19:53:15:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:619 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:619 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:638 -> [UART, PM25] Reading data...
19:53:15:639 -> [UART, PM25] Data not available.
19:53:15:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:639 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:639 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:659 -> [UART, PM25] Reading data...
19:53:15:659 -> [UART, PM25] Data not available.
19:53:15:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:659 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:659 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:680 -> [UART, PM25] Reading data...
19:53:15:681 -> [UART, PM25] Data not available.
19:53:15:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:681 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:681 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:701 -> [UART, PM25] Reading data...
19:53:15:702 -> [UART, PM25] Data not available.
19:53:15:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:702 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:702 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:722 -> [UART, PM25] Reading data...
19:53:15:722 -> [UART, PM25] Data not available.
19:53:15:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:722 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:722 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:743 -> [UART, PM25] Reading data...
19:53:15:743 -> [UART, PM25] Data not available.
19:53:15:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:743 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:743 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:764 -> [UART, PM25] Reading data...
19:53:15:764 -> [UART, PM25] Data not available.
19:53:15:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:764 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:764 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:785 -> [UART, PM25] Reading data...
19:53:15:785 -> [UART, PM25] Data not available.
19:53:15:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:785 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:785 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:806 -> [UART, PM25] Reading data...
19:53:15:806 -> [UART, PM25] Data not available.
19:53:15:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:806 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:806 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:827 -> [UART, PM25] Reading data...
19:53:15:827 -> [UART, PM25] Data not available.
19:53:15:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:827 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:827 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:848 -> [UART, PM25] Reading data...
19:53:15:848 -> [UART, PM25] Data not available.
19:53:15:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:848 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:848 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:869 -> [UART, PM25] Reading data...
19:53:15:875 -> [UART, PM25] Data not available.
19:53:15:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:875 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:875 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:890 -> [UART, PM25] Reading data...
19:53:15:891 -> [UART, PM25] Data not available.
19:53:15:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:891 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:891 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:911 -> [UART, PM25] Reading data...
19:53:15:911 -> [UART, PM25] Data not available.
19:53:15:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:911 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:911 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:932 -> [UART, PM25] Reading data...
19:53:15:932 -> [UART, PM25] Data not available.
19:53:15:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:932 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:932 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:953 -> [UART, PM25] Reading data...
19:53:15:953 -> [UART, PM25] Data not available.
19:53:15:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:954 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:954 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:974 -> [UART, PM25] Reading data...
19:53:15:974 -> [UART, PM25] Data not available.
19:53:15:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:974 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:974 -> [UART, PM25] Uart available, resetting event queue..
19:53:15:995 -> [UART, PM25] Reading data...
19:53:15:995 -> [UART, PM25] Data not available.
19:53:15:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:15:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:15:995 -> [UART, PM25] Uart available, clearing write errors..
19:53:15:995 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:016 -> [UART, PM25] Reading data...
19:53:16:016 -> [UART, PM25] Data not available.
19:53:16:016 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:016 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:016 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:016 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:037 -> [UART, PM25] Reading data...
19:53:16:037 -> [UART, PM25] Data not available.
19:53:16:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:037 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:037 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:058 -> [UART, PM25] Reading data...
19:53:16:058 -> [UART, PM25] Data not available.
19:53:16:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:058 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:058 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:079 -> [UART, PM25] Reading data...
19:53:16:079 -> [UART, PM25] Data not available.
19:53:16:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:079 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:079 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:100 -> [UART, PM25] Reading data...
19:53:16:100 -> [UART, PM25] Data not available.
19:53:16:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:100 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:100 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:131 -> [UART, PM25] Reading data...
19:53:16:131 -> [UART, PM25] Data not available.
19:53:16:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:131 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:131 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:142 -> [UART, PM25] Reading data...
19:53:16:142 -> [UART, PM25] Data not available.
19:53:16:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:142 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:142 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:163 -> [UART, PM25] Reading data...
19:53:16:163 -> [UART, PM25] Data not available.
19:53:16:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:164 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:164 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:184 -> [UART, PM25] Reading data...
19:53:16:185 -> [UART, PM25] Data not available.
19:53:16:185 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:185 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:185 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:185 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:205 -> [UART, PM25] Reading data...
19:53:16:205 -> [UART, PM25] Data not available.
19:53:16:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:205 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:205 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:226 -> [UART, PM25] Reading data...
19:53:16:226 -> [UART, PM25] Data not available.
19:53:16:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:226 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:226 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:247 -> [UART, PM25] Reading data...
19:53:16:248 -> [UART, PM25] Data not available.
19:53:16:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:248 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:248 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:268 -> [UART, PM25] Reading data...
19:53:16:268 -> [UART, PM25] Data not available.
19:53:16:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:269 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:269 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:289 -> [UART, PM25] Reading data...
19:53:16:289 -> [UART, PM25] Data not available.
19:53:16:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:289 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:289 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:310 -> [UART, PM25] Reading data...
19:53:16:310 -> [UART, PM25] Data not available.
19:53:16:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:310 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:310 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:331 -> [UART, PM25] Reading data...
19:53:16:331 -> [UART, PM25] Data not available.
19:53:16:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:332 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:332 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:352 -> [UART, PM25] Reading data...
19:53:16:352 -> [UART, PM25] Data not available.
19:53:16:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:352 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:352 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:373 -> [UART, PM25] Reading data...
19:53:16:373 -> [UART, PM25] Data not available.
19:53:16:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:373 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:373 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:394 -> [UART, PM25] Reading data...
19:53:16:399 -> [UART, PM25] Data not available.
19:53:16:399 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:399 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:399 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:399 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:415 -> [UART, PM25] Reading data...
19:53:16:415 -> [UART, PM25] Data not available.
19:53:16:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:415 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:415 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:436 -> [UART, PM25] Reading data...
19:53:16:436 -> [UART, PM25] Data not available.
19:53:16:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:437 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:437 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:480 -> [UART, PM25] Reading data...
19:53:16:498 -> [UART, PM25] Data not available.
19:53:16:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:498 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:498 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:498 -> [UART, PM25] Reading data...
19:53:16:498 -> [UART, PM25] Data not available.
19:53:16:498 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:498 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:498 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:498 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:503 -> [UART, PM25] Reading data...
19:53:16:503 -> [UART, PM25] Data not available.
19:53:16:503 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:503 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:503 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:503 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:520 -> [UART, PM25] Reading data...
19:53:16:520 -> [UART, PM25] Data not available.
19:53:16:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:520 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:520 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:541 -> [UART, PM25] Reading data...
19:53:16:541 -> [UART, PM25] Data not available.
19:53:16:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:541 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:541 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:562 -> [UART, PM25] Reading data...
19:53:16:562 -> [UART, PM25] Data not available.
19:53:16:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:562 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:562 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:583 -> [UART, PM25] Reading data...
19:53:16:583 -> [UART, PM25] Data not available.
19:53:16:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:583 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:583 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:604 -> [UART, PM25] Reading data...
19:53:16:604 -> [UART, PM25] Data not available.
19:53:16:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:604 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:604 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:625 -> [UART, PM25] Reading data...
19:53:16:625 -> [UART, PM25] Data not available.
19:53:16:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:625 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:625 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:646 -> [UART, PM25] Reading data...
19:53:16:646 -> [UART, PM25] Data not available.
19:53:16:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:646 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:646 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:667 -> [UART, PM25] Reading data...
19:53:16:667 -> [UART, PM25] Data not available.
19:53:16:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:667 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:667 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:688 -> [UART, PM25] Reading data...
19:53:16:688 -> [UART, PM25] Data not available.
19:53:16:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:688 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:688 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:709 -> [UART, PM25] Reading data...
19:53:16:709 -> [UART, PM25] Data not available.
19:53:16:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:709 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:709 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:730 -> [UART, PM25] Reading data...
19:53:16:730 -> [UART, PM25] Data not available.
19:53:16:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:730 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:730 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:751 -> [UART, PM25] Reading data...
19:53:16:751 -> [UART, PM25] Data not available.
19:53:16:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:751 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:751 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:772 -> [UART, PM25] Reading data...
19:53:16:772 -> [UART, PM25] Data not available.
19:53:16:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:772 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:772 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:793 -> [UART, PM25] Reading data...
19:53:16:793 -> [UART, PM25] Data not available.
19:53:16:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:793 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:793 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:814 -> [UART, PM25] Reading data...
19:53:16:814 -> [UART, PM25] Data not available.
19:53:16:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:814 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:814 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:835 -> [UART, PM25] Reading data...
19:53:16:835 -> [UART, PM25] Data not available.
19:53:16:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:835 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:835 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:856 -> [UART, PM25] Reading data...
19:53:16:856 -> [UART, PM25] Data not available.
19:53:16:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:856 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:856 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:877 -> [UART, PM25] Reading data...
19:53:16:877 -> [UART, PM25] Data not available.
19:53:16:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:878 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:878 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:898 -> [UART, PM25] Reading data...

19:53:16:899 -> [UART, PM25] Data not available.
19:53:16:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:16:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:16:899 -> [UART, PM25] Uart available, clearing write errors..
19:53:16:899 -> [UART, PM25] Uart available, resetting event queue..
19:53:16:899 -> PING!19:53:17:112 -> [UART, PM25] Reading data...
19:53:17:112 -> [UART, PM25] Data not available.
19:53:17:113 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:113 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:113 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:113 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:133 -> [UART, PM25] Reading data...
19:53:17:133 -> [UART, PM25] Data not available.
19:53:17:134 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:134 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:134 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:134 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:168 -> [UART, PM25] Reading data...
19:53:17:168 -> [UART, PM25] Data not available.
19:53:17:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:174 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:174 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:175 -> [UART, PM25] Reading data...
19:53:17:175 -> [UART, PM25] Data not available.
19:53:17:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:175 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:175 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:196 -> [UART, PM25] Reading data...
19:53:17:196 -> [UART, PM25] Data not available.
19:53:17:197 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:197 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:197 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:197 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:217 -> [UART, PM25] Reading data...
19:53:17:217 -> [UART, PM25] Data not available.
19:53:17:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:217 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:217 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:238 -> [UART, PM25] Reading data...
19:53:17:239 -> [UART, PM25] Data not available.
19:53:17:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:239 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:239 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:259 -> [UART, PM25] Reading data...
19:53:17:259 -> [UART, PM25] Data not available.
19:53:17:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:259 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:259 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:280 -> [UART, PM25] Reading data...
19:53:17:280 -> [UART, PM25] Data not available.
19:53:17:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:280 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:280 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:301 -> [UART, PM25] Reading data...
19:53:17:301 -> [UART, PM25] Data not available.
19:53:17:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:302 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:302 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:322 -> [UART, PM25] Reading data...
19:53:17:322 -> [UART, PM25] Data not available.
19:53:17:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:322 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:322 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:343 -> [UART, PM25] Reading data...
19:53:17:343 -> [UART, PM25] Data not available.
19:53:17:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:344 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:344 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:364 -> [UART, PM25] Reading data...
19:53:17:364 -> [UART, PM25] Data not available.
19:53:17:365 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:365 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:365 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:365 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:385 -> [UART, PM25] Reading data...
19:53:17:386 -> [UART, PM25] Data not available.
19:53:17:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:386 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:386 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:406 -> [UART, PM25] Reading data...
19:53:17:406 -> [UART, PM25] Data not available.
19:53:17:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:406 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:406 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:427 -> [UART, PM25] Reading data...
19:53:17:427 -> [UART, PM25] Data not available.
19:53:17:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:427 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:427 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:448 -> [UART, PM25] Reading data...
19:53:17:448 -> [UART, PM25] Data not available.
19:53:17:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:470 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:470 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:469 -> [UART, PM25] Reading data...
19:53:17:469 -> [UART, PM25] Data not available.
19:53:17:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:448 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:448 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:490 -> [UART, PM25] Reading data...
19:53:17:491 -> [UART, PM25] Data not available.
19:53:17:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:491 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:491 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:511 -> [UART, PM25] Reading data...
19:53:17:511 -> [UART, PM25] Data not available.
19:53:17:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:511 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:511 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:532 -> [UART, PM25] Reading data...
19:53:17:537 -> [UART, PM25] Data not available.
19:53:17:537 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:537 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:537 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:537 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:553 -> [UART, PM25] Reading data...
19:53:17:553 -> [UART, PM25] Data not available.
19:53:17:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:553 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:553 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:574 -> [UART, PM25] Reading data...
19:53:17:574 -> [UART, PM25] Data not available.
19:53:17:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:574 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:574 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:596 -> [UART, PM25] Reading data...
19:53:17:596 -> [UART, PM25] Data not available.
19:53:17:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:596 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:596 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:617 -> [UART, PM25] Reading data...
19:53:17:617 -> [UART, PM25] Data not available.
19:53:17:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:617 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:617 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:638 -> [UART, PM25] Reading data...
19:53:17:638 -> [UART, PM25] Data not available.
19:53:17:638 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:638 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:638 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:638 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:659 -> [UART, PM25] Reading data...
19:53:17:659 -> [UART, PM25] Data not available.
19:53:17:660 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:660 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:660 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:660 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:687 -> [UART, PM25] Reading data...
19:53:17:687 -> [UART, PM25] Data not available.
19:53:17:687 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:687 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:687 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:687 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:701 -> [UART, PM25] Reading data...
19:53:17:702 -> [UART, PM25] Data not available.
19:53:17:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:702 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:702 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:722 -> [UART, PM25] Reading data...
19:53:17:722 -> [UART, PM25] Data not available.
19:53:17:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:722 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:722 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:743 -> [UART, PM25] Reading data...
19:53:17:743 -> [UART, PM25] Data not available.
19:53:17:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:743 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:743 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:764 -> [UART, PM25] Reading data...
19:53:17:764 -> [UART, PM25] Data not available.
19:53:17:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:765 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:765 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:785 -> [UART, PM25] Reading data...
19:53:17:785 -> [UART, PM25] Data not available.
19:53:17:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:785 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:785 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:806 -> [UART, PM25] Reading data...
19:53:17:806 -> [UART, PM25] Data not available.
19:53:17:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:806 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:806 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:827 -> [UART, PM25] Reading data...
19:53:17:827 -> [UART, PM25] Data not available.
19:53:17:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:827 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:827 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:848 -> [UART, PM25] Reading data...
19:53:17:849 -> [UART, PM25] Data not available.
19:53:17:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:849 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:849 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:869 -> [UART, PM25] Reading data...
19:53:17:869 -> [UART, PM25] Data not available.
19:53:17:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:869 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:869 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:890 -> [UART, PM25] Reading data...
19:53:17:890 -> [UART, PM25] Data not available.
19:53:17:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:890 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:890 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:911 -> [UART, PM25] Reading data...
19:53:17:912 -> [UART, PM25] Data not available.
19:53:17:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:912 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:912 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:932 -> [UART, PM25] Reading data...
19:53:17:932 -> [UART, PM25] Data not available.
19:53:17:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:932 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:932 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:953 -> [UART, PM25] Reading data...
19:53:17:953 -> [UART, PM25] Data not available.
19:53:17:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:953 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:953 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:974 -> [UART, PM25] Reading data...
19:53:17:975 -> [UART, PM25] Data not available.
19:53:17:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:975 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:975 -> [UART, PM25] Uart available, resetting event queue..
19:53:17:995 -> [UART, PM25] Reading data...
19:53:17:995 -> [UART, PM25] Data not available.
19:53:17:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:17:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:17:995 -> [UART, PM25] Uart available, clearing write errors..
19:53:17:995 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:016 -> [UART, PM25] Reading data...
19:53:18:017 -> [UART, PM25] Data not available.
19:53:18:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:017 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:017 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:037 -> [UART, PM25] Reading data...
19:53:18:037 -> [UART, PM25] Data not available.
19:53:18:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:038 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:038 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:058 -> [UART, PM25] Reading data...
19:53:18:058 -> [UART, PM25] Data not available.
19:53:18:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:058 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:058 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:079 -> [UART, PM25] Reading data...
19:53:18:080 -> [UART, PM25] Data not available.
19:53:18:080 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:080 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:080 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:080 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:100 -> [UART, PM25] Reading data...
19:53:18:101 -> [UART, PM25] Data not available.
19:53:18:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:101 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:101 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:121 -> [UART, PM25] Reading data...
19:53:18:121 -> [UART, PM25] Data not available.
19:53:18:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:122 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:122 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:142 -> [UART, PM25] Reading data...
19:53:18:142 -> [UART, PM25] Data not available.
19:53:18:142 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:142 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:142 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:142 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:163 -> [UART, PM25] Reading data...
19:53:18:163 -> [UART, PM25] Data not available.
19:53:18:163 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:163 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:163 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:163 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:184 -> [UART, PM25] Reading data...
19:53:18:184 -> [UART, PM25] Data not available.
19:53:18:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:205 -> [UART, PM25] Reading data...
19:53:18:205 -> [UART, PM25] Data not available.
19:53:18:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:206 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:206 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:226 -> [UART, PM25] Reading data...
19:53:18:226 -> [UART, PM25] Data not available.
19:53:18:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:226 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:226 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:247 -> [UART, PM25] Reading data...
19:53:18:247 -> [UART, PM25] Data not available.
19:53:18:247 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:247 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:247 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:247 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:268 -> [UART, PM25] Reading data...
19:53:18:269 -> [UART, PM25] Data not available.
19:53:18:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:269 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:269 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:289 -> [UART, PM25] Reading data...
19:53:18:289 -> [UART, PM25] Data not available.
19:53:18:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:290 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:290 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:310 -> [UART, PM25] Reading data...
19:53:18:310 -> [UART, PM25] Data not available.
19:53:18:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:310 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:310 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:331 -> [UART, PM25] Reading data...
19:53:18:331 -> [UART, PM25] Data not available.
19:53:18:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:332 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:332 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:354 -> [UART, PM25] Reading data...
19:53:18:388 -> [UART, PM25] Data not available.
19:53:18:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:388 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:388 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:388 -> [UART, PM25] Reading data...
19:53:18:388 -> [UART, PM25] Data not available.
19:53:18:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:388 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:400 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:400 -> [UART, PM25] Reading data...
19:53:18:400 -> [UART, PM25] Data not available.
19:53:18:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:400 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:400 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:415 -> [UART, PM25] Reading data...
19:53:18:416 -> [UART, PM25] Data not available.
19:53:18:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:416 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:416 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:436 -> [UART, PM25] Reading data...
19:53:18:436 -> [UART, PM25] Data not available.
19:53:18:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:436 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:436 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:457 -> [UART, PM25] Reading data...
19:53:18:457 -> [UART, PM25] Data not available.
19:53:18:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:457 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:457 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:478 -> [UART, PM25] Reading data...
19:53:18:478 -> [UART, PM25] Data not available.
19:53:18:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:478 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:478 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:499 -> [UART, PM25] Reading data...
19:53:18:499 -> [UART, PM25] Data not available.
19:53:18:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:499 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:499 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:520 -> [UART, PM25] Reading data...
19:53:18:520 -> [UART, PM25] Data not available.
19:53:18:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:521 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:521 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:541 -> [UART, PM25] Reading data...
19:53:18:541 -> [UART, PM25] Data not available.
19:53:18:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:542 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:542 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:562 -> [UART, PM25] Reading data...
19:53:18:562 -> [UART, PM25] Data not available.
19:53:18:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:562 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:562 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:586 -> [UART, PM25] Reading data...
19:53:18:587 -> [UART, PM25] Data not available.
19:53:18:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:587 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:587 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:604 -> [UART, PM25] Reading data...
19:53:18:604 -> [UART, PM25] Data not available.
19:53:18:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:604 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:604 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:625 -> [UART, PM25] Reading data...
19:53:18:625 -> [UART, PM25] Data not available.
19:53:18:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:625 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:625 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:646 -> [UART, PM25] Reading data...
19:53:18:646 -> [UART, PM25] Data not available.
19:53:18:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:646 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:646 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:667 -> [UART, PM25] Reading data...
19:53:18:667 -> [UART, PM25] Data not available.
19:53:18:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:668 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:668 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:688 -> [UART, PM25] Reading data...
19:53:18:688 -> [UART, PM25] Data not available.
19:53:18:688 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:688 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:688 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:688 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:710 -> [UART, PM25] Reading data...
19:53:18:710 -> [UART, PM25] Data not available.
19:53:18:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:710 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:710 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:731 -> [UART, PM25] Reading data...
19:53:18:731 -> [UART, PM25] Data not available.
19:53:18:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:731 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:731 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:751 -> [UART, PM25] Reading data...
19:53:18:751 -> [UART, PM25] Data not available.
19:53:18:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:751 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:751 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:772 -> [UART, PM25] Reading data...
19:53:18:772 -> [UART, PM25] Data not available.
19:53:18:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:772 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:772 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:793 -> [UART, PM25] Reading data...
19:53:18:793 -> [UART, PM25] Data not available.
19:53:18:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:793 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:793 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:814 -> [UART, PM25] Reading data...
19:53:18:814 -> [UART, PM25] Data not available.
19:53:18:814 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:814 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:814 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:814 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:835 -> [UART, PM25] Reading data...
19:53:18:835 -> [UART, PM25] Data not available.
19:53:18:835 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:835 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:835 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:835 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:856 -> [UART, PM25] Reading data...
19:53:18:857 -> [UART, PM25] Data not available.
19:53:18:857 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:857 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:857 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:857 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:877 -> [UART, PM25] Reading data...
19:53:18:877 -> [UART, PM25] Data not available.
19:53:18:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:877 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:877 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:898 -> [UART, PM25] Reading data...
19:53:18:898 -> [UART, PM25] Data not available.
19:53:18:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:898 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:898 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:919 -> [UART, PM25] Reading data...
19:53:18:919 -> [UART, PM25] Data not available.
19:53:18:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:919 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:919 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:940 -> [UART, PM25] Reading data...
19:53:18:940 -> [UART, PM25] Data not available.
19:53:18:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:940 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:940 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:961 -> [UART, PM25] Reading data...
19:53:18:961 -> [UART, PM25] Data not available.
19:53:18:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:961 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:961 -> [UART, PM25] Uart available, resetting event queue..
19:53:18:982 -> [UART, PM25] Reading data...
19:53:18:982 -> [UART, PM25] Data not available.
19:53:18:982 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:18:982 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:18:982 -> [UART, PM25] Uart available, clearing write errors..
19:53:18:982 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:003 -> [UART, PM25] Reading data...
19:53:19:003 -> [UART, PM25] Data not available.
19:53:19:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:003 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:003 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:024 -> [UART, PM25] Reading data...
19:53:19:024 -> [UART, PM25] Data not available.
19:53:19:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:024 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:024 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:045 -> [UART, PM25] Reading data...
19:53:19:045 -> [UART, PM25] Data not available.
19:53:19:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:045 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:045 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:066 -> [UART, PM25] Reading data...
19:53:19:066 -> [UART, PM25] Data not available.
19:53:19:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:066 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:066 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:087 -> [UART, PM25] Reading data...
19:53:19:087 -> [UART, PM25] Data not available.
19:53:19:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:087 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:087 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:108 -> [UART, PM25] Reading data...
19:53:19:108 -> [UART, PM25] Data not available.
19:53:19:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:108 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:108 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:129 -> [UART, PM25] Reading data...
19:53:19:129 -> [UART, PM25] Data not available.
19:53:19:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:129 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:129 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:150 -> [UART, PM25] Reading data...
19:53:19:150 -> [UART, PM25] Data not available.
19:53:19:151 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:151 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:151 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:151 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:171 -> [UART, PM25] Reading data...
19:53:19:171 -> [UART, PM25] Data not available.
19:53:19:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:171 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:171 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:192 -> [UART, PM25] Reading data...
19:53:19:193 -> [UART, PM25] Data not available.
19:53:19:193 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:193 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:193 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:193 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:229 -> [UART, PM25] Reading data...
19:53:19:230 -> [UART, PM25] Data not available.
19:53:19:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:230 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:230 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:234 -> [UART, PM25] Reading data...
19:53:19:234 -> [UART, PM25] Data not available.
19:53:19:235 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:235 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:235 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:235 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:255 -> [UART, PM25] Reading data...
19:53:19:255 -> [UART, PM25] Data not available.
19:53:19:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:255 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:255 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:276 -> [UART, PM25] Reading data...
19:53:19:276 -> [UART, PM25] Data not available.
19:53:19:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:276 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:276 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:297 -> [UART, PM25] Reading data...
19:53:19:297 -> [UART, PM25] Data not available.
19:53:19:297 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:297 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:297 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:297 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:318 -> [UART, PM25] Reading data...
19:53:19:318 -> [UART, PM25] Data not available.
19:53:19:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:318 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:318 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:339 -> [UART, PM25] Reading data...
19:53:19:339 -> [UART, PM25] Data not available.
19:53:19:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:340 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:340 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:360 -> [UART, PM25] Reading data...
19:53:19:360 -> [UART, PM25] Data not available.
19:53:19:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:360 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:360 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:381 -> [UART, PM25] Reading data...
19:53:19:381 -> [UART, PM25] Data not available.
19:53:19:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:381 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:381 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:402 -> [UART, PM25] Reading data...
19:53:19:402 -> [UART, PM25] Data not available.
19:53:19:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:402 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:402 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:423 -> [UART, PM25] Reading data...
19:53:19:423 -> [UART, PM25] Data not available.
19:53:19:424 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:424 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:424 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:424 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:444 -> [UART, PM25] Reading data...
19:53:19:444 -> [UART, PM25] Data not available.
19:53:19:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:444 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:444 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:465 -> [UART, PM25] Reading data...
19:53:19:465 -> [UART, PM25] Data not available.
19:53:19:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:465 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:465 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:486 -> [UART, PM25] Reading data...
19:53:19:486 -> [UART, PM25] Data not available.
19:53:19:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:486 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:486 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:507 -> [UART, PM25] Reading data...
19:53:19:507 -> [UART, PM25] Data not available.
19:53:19:508 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:508 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:508 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:508 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:528 -> [UART, PM25] Reading data...
19:53:19:528 -> [UART, PM25] Data not available.
19:53:19:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:528 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:528 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:549 -> [UART, PM25] Reading data...
19:53:19:549 -> [UART, PM25] Data not available.
19:53:19:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:549 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:549 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:571 -> [UART, PM25] Reading data...
19:53:19:572 -> [UART, PM25] Data not available.
19:53:19:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:572 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:572 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:591 -> [UART, PM25] Reading data...
19:53:19:591 -> [UART, PM25] Data not available.
19:53:19:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:591 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:591 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:612 -> [UART, PM25] Reading data...
19:53:19:612 -> [UART, PM25] Data not available.
19:53:19:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:612 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:612 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:633 -> [UART, PM25] Reading data...
19:53:19:633 -> [UART, PM25] Data not available.
19:53:19:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:633 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:633 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:654 -> [UART, PM25] Reading data...
19:53:19:654 -> [UART, PM25] Data not available.
19:53:19:655 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:655 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:655 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:655 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:675 -> [UART, PM25] Reading data...
19:53:19:675 -> [UART, PM25] Data not available.
19:53:19:676 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:676 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:676 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:676 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:696 -> [UART, PM25] Reading data...
19:53:19:696 -> [UART, PM25] Data not available.
19:53:19:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:696 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:696 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:717 -> [UART, PM25] Reading data...
19:53:19:719 -> [UART, PM25] Data not available.
19:53:19:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:719 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:719 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:747 -> [UART, PM25] Reading data...
19:53:19:747 -> [UART, PM25] Data not available.
19:53:19:747 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:747 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:747 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:747 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:759 -> [UART, PM25] Reading data...
19:53:19:760 -> [UART, PM25] Data not available.
19:53:19:760 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:760 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:760 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:760 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:780 -> [UART, PM25] Reading data...
19:53:19:780 -> [UART, PM25] Data not available.
19:53:19:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:780 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:780 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:801 -> [UART, PM25] Reading data...
19:53:19:801 -> [UART, PM25] Data not available.
19:53:19:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:801 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:801 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:822 -> [UART, PM25] Reading data...
19:53:19:822 -> [UART, PM25] Data not available.
19:53:19:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:822 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:822 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:843 -> [UART, PM25] Reading data...
19:53:19:843 -> [UART, PM25] Data not available.
19:53:19:844 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:844 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:844 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:844 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:864 -> [UART, PM25] Reading data...
19:53:19:864 -> [UART, PM25] Data not available.
19:53:19:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:864 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:864 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:886 -> [UART, PM25] Reading data...
19:53:19:886 -> [UART, PM25] Data not available.
19:53:19:886 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:886 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:886 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:886 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:906 -> [UART, PM25] Reading data...
19:53:19:906 -> [UART, PM25] Data not available.
19:53:19:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:906 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:906 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:927 -> [UART, PM25] Reading data...
19:53:19:927 -> [UART, PM25] Data not available.
19:53:19:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:927 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:927 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:948 -> [UART, PM25] Reading data...
19:53:19:948 -> [UART, PM25] Data not available.
19:53:19:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:948 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:948 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:969 -> [UART, PM25] Reading data...
19:53:19:969 -> [UART, PM25] Data not available.
19:53:19:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:969 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:969 -> [UART, PM25] Uart available, resetting event queue..
19:53:19:990 -> [UART, PM25] Reading data...
19:53:19:991 -> [UART, PM25] Data not available.
19:53:19:991 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:19:991 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:19:991 -> [UART, PM25] Uart available, clearing write errors..
19:53:19:991 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:011 -> [UART, PM25] Reading data...
19:53:20:011 -> [UART, PM25] Data not available.
19:53:20:011 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:011 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:011 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:011 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:036 -> [UART, PM25] Reading data...
19:53:20:036 -> [UART, PM25] Data not available.
19:53:20:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:036 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:036 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:053 -> [UART, PM25] Reading data...
19:53:20:054 -> [UART, PM25] Data not available.
19:53:20:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:054 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:054 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:074 -> [UART, PM25] Reading data...
19:53:20:074 -> [UART, PM25] Data not available.
19:53:20:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:074 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:074 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:095 -> [UART, PM25] Reading data...
19:53:20:096 -> [UART, PM25] Data not available.
19:53:20:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:096 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:096 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:116 -> [UART, PM25] Reading data...
19:53:20:117 -> [UART, PM25] Data not available.
19:53:20:117 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:117 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:117 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:117 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:137 -> [UART, PM25] Reading data...
19:53:20:138 -> [UART, PM25] Data not available.
19:53:20:138 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:138 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:138 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:138 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:158 -> [UART, PM25] Reading data...
19:53:20:158 -> [UART, PM25] Data not available.
19:53:20:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:158 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:158 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:179 -> [UART, PM25] Reading data...
19:53:20:179 -> [UART, PM25] Data not available.
19:53:20:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:179 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:179 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:200 -> [UART, PM25] Reading data...
19:53:20:200 -> [UART, PM25] Data not available.
19:53:20:200 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:200 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:200 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:200 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:221 -> [UART, PM25] Reading data...
19:53:20:221 -> [UART, PM25] Data not available.
19:53:20:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:221 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:221 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:242 -> [UART, PM25] Reading data...
19:53:20:242 -> [UART, PM25] Data not available.
19:53:20:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:242 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:242 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:267 -> [UART, PM25] Reading data...
19:53:20:268 -> [UART, PM25] Data not available.
19:53:20:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:268 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:268 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:302 -> [UART, PM25] Reading data...
19:53:20:315 -> [UART, PM25] Data not available.
19:53:20:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:315 -> [UART, PM25] Reading data...
19:53:20:315 -> [UART, PM25] Data not available.
19:53:20:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:326 -> [UART, PM25] Reading data...
19:53:20:326 -> [UART, PM25] Data not available.
19:53:20:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:326 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:326 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:347 -> [UART, PM25] Reading data...
19:53:20:348 -> [UART, PM25] Data not available.
19:53:20:348 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:348 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:348 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:348 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:368 -> [UART, PM25] Reading data...
19:53:20:368 -> [UART, PM25] Data not available.
19:53:20:369 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:369 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:369 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:369 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:389 -> [UART, PM25] Reading data...
19:53:20:389 -> [UART, PM25] Data not available.
19:53:20:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:389 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:389 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:410 -> [UART, PM25] Reading data...
19:53:20:410 -> [UART, PM25] Data not available.
19:53:20:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:410 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:410 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:431 -> [UART, PM25] Reading data...
19:53:20:431 -> [UART, PM25] Data not available.
19:53:20:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:432 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:432 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:452 -> [UART, PM25] Reading data...
19:53:20:452 -> [UART, PM25] Data not available.
19:53:20:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:452 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:452 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:473 -> [UART, PM25] Reading data...
19:53:20:473 -> [UART, PM25] Data not available.
19:53:20:474 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:474 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:474 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:474 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:494 -> [UART, PM25] Reading data...
19:53:20:494 -> [UART, PM25] Data not available.
19:53:20:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:494 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:494 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:515 -> [UART, PM25] Reading data...
19:53:20:515 -> [UART, PM25] Data not available.
19:53:20:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:515 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:515 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:536 -> [UART, PM25] Reading data...
19:53:20:536 -> [UART, PM25] Data not available.
19:53:20:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:536 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:536 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:557 -> [UART, PM25] Reading data...
19:53:20:557 -> [UART, PM25] Data not available.
19:53:20:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:557 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:557 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:578 -> [UART, PM25] Reading data...
19:53:20:578 -> [UART, PM25] Data not available.
19:53:20:579 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:579 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:579 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:579 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:599 -> [UART, PM25] Reading data...
19:53:20:599 -> [UART, PM25] Data not available.
19:53:20:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:599 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:599 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:620 -> [UART, PM25] Reading data...
19:53:20:620 -> [UART, PM25] Data not available.
19:53:20:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:620 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:620 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:641 -> [UART, PM25] Reading data...
19:53:20:641 -> [UART, PM25] Data not available.
19:53:20:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:641 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:641 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:662 -> [UART, PM25] Reading data...
19:53:20:663 -> [UART, PM25] Data not available.
19:53:20:663 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:663 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:663 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:663 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:683 -> [UART, PM25] Reading data...
19:53:20:684 -> [UART, PM25] Data not available.
19:53:20:684 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:684 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:684 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:684 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:704 -> [UART, PM25] Reading data...
19:53:20:705 -> [UART, PM25] Data not available.
19:53:20:705 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:705 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:705 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:705 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:725 -> [UART, PM25] Reading data...
19:53:20:725 -> [UART, PM25] Data not available.
19:53:20:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:725 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:725 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:746 -> [UART, PM25] Reading data...
19:53:20:746 -> [UART, PM25] Data not available.
19:53:20:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:746 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:746 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:778 -> [UART, PM25] Reading data...
19:53:20:778 -> [UART, PM25] Data not available.
19:53:20:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:778 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:778 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:788 -> [UART, PM25] Reading data...
19:53:20:788 -> [UART, PM25] Data not available.
19:53:20:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:788 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:788 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:809 -> [UART, PM25] Reading data...
19:53:20:809 -> [UART, PM25] Data not available.
19:53:20:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:809 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:809 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:830 -> [UART, PM25] Reading data...
19:53:20:830 -> [UART, PM25] Data not available.
19:53:20:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:830 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:830 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:851 -> [UART, PM25] Reading data...
19:53:20:851 -> [UART, PM25] Data not available.
19:53:20:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:851 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:851 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:872 -> [UART, PM25] Reading data...
19:53:20:873 -> [UART, PM25] Data not available.
19:53:20:873 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:873 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:873 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:873 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:893 -> [UART, PM25] Reading data...
19:53:20:894 -> [UART, PM25] Data not available.
19:53:20:894 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:894 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:894 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:894 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:915 -> [UART, PM25] Reading data...
19:53:20:916 -> [UART, PM25] Data not available.
19:53:20:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:916 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:916 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:935 -> [UART, PM25] Reading data...
19:53:20:935 -> [UART, PM25] Data not available.
19:53:20:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:935 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:935 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:956 -> [UART, PM25] Reading data...
19:53:20:956 -> [UART, PM25] Data not available.
19:53:20:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:956 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:956 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:977 -> [UART, PM25] Reading data...
19:53:20:978 -> [UART, PM25] Data not available.
19:53:20:978 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:978 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:978 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:978 -> [UART, PM25] Uart available, resetting event queue..
19:53:20:998 -> [UART, PM25] Reading data...
19:53:20:998 -> [UART, PM25] Data not available.
19:53:20:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:20:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:20:998 -> [UART, PM25] Uart available, clearing write errors..
19:53:20:998 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:019 -> [UART, PM25] Reading data...
19:53:21:019 -> [UART, PM25] Data not available.
19:53:21:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:019 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:019 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:040 -> [UART, PM25] Reading data...
19:53:21:040 -> [UART, PM25] Data not available.
19:53:21:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:040 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:040 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:061 -> [UART, PM25] Reading data...
19:53:21:061 -> [UART, PM25] Data not available.
19:53:21:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:061 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:061 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:082 -> [UART, PM25] Reading data...
19:53:21:082 -> [UART, PM25] Data not available.
19:53:21:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:083 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:083 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:103 -> [UART, PM25] Reading data...
19:53:21:103 -> [UART, PM25] Data not available.
19:53:21:104 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:104 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:104 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:104 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:124 -> [UART, PM25] Reading data...
19:53:21:124 -> [UART, PM25] Data not available.
19:53:21:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:124 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:124 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:145 -> [UART, PM25] Reading data...
19:53:21:145 -> [UART, PM25] Data not available.
19:53:21:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:145 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:145 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:166 -> [UART, PM25] Reading data...
19:53:21:167 -> [UART, PM25] Data not available.
19:53:21:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:167 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:167 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:187 -> [UART, PM25] Reading data...
19:53:21:188 -> [UART, PM25] Data not available.
19:53:21:188 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:188 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:188 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:188 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:208 -> [UART, PM25] Reading data...
19:53:21:208 -> [UART, PM25] Data not available.
19:53:21:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:208 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:208 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:229 -> [UART, PM25] Reading data...
19:53:21:229 -> [UART, PM25] Data not available.
19:53:21:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:229 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:229 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:250 -> [UART, PM25] Reading data...
19:53:21:250 -> [UART, PM25] Data not available.
19:53:21:251 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:251 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:251 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:251 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:272 -> [UART, PM25] Reading data...
19:53:21:272 -> [UART, PM25] Data not available.
19:53:21:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:273 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:273 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:293 -> [UART, PM25] Reading data...
19:53:21:293 -> [UART, PM25] Data not available.
19:53:21:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:294 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:294 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:314 -> [UART, PM25] Reading data...
19:53:21:315 -> [UART, PM25] Data not available.
19:53:21:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:335 -> [UART, PM25] Reading data...
19:53:21:335 -> [UART, PM25] Data not available.
19:53:21:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:335 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:335 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:356 -> [UART, PM25] Reading data...
19:53:21:356 -> [UART, PM25] Data not available.
19:53:21:356 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:356 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:356 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:356 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:377 -> [UART, PM25] Reading data...
19:53:21:377 -> [UART, PM25] Data not available.
19:53:21:377 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:377 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:377 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:377 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:398 -> [UART, PM25] Reading data...
19:53:21:398 -> [UART, PM25] Data not available.
19:53:21:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:398 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:398 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:419 -> [UART, PM25] Reading data...
19:53:21:420 -> [UART, PM25] Data not available.
19:53:21:420 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:420 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:420 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:420 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:440 -> [UART, PM25] Reading data...
19:53:21:440 -> [UART, PM25] Data not available.
19:53:21:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:441 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:441 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:461 -> [UART, PM25] Reading data...
19:53:21:461 -> [UART, PM25] Data not available.
19:53:21:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:461 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:461 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:483 -> [UART, PM25] Reading data...
19:53:21:483 -> [UART, PM25] Data not available.
19:53:21:483 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:483 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:483 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:483 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:503 -> [UART, PM25] Reading data...
19:53:21:503 -> [UART, PM25] Data not available.
19:53:21:504 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:504 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:504 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:504 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:524 -> [UART, PM25] Reading data...
19:53:21:524 -> [UART, PM25] Data not available.
19:53:21:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:524 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:524 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:545 -> [UART, PM25] Reading data...
19:53:21:545 -> [UART, PM25] Data not available.
19:53:21:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:545 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:545 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:566 -> [UART, PM25] Reading data...
19:53:21:566 -> [UART, PM25] Data not available.
19:53:21:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:566 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:566 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:587 -> [UART, PM25] Reading data...
19:53:21:587 -> [UART, PM25] Data not available.
19:53:21:587 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:587 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:587 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:587 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:608 -> [UART, PM25] Reading data...
19:53:21:608 -> [UART, PM25] Data not available.
19:53:21:608 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:608 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:608 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:608 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:609 -> PING!
19:53:21:822 -> [UART, PM25] Reading data...
19:53:21:822 -> [UART, PM25] Data not available.
19:53:21:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:822 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:822 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:843 -> [UART, PM25] Reading data...
19:53:21:843 -> [UART, PM25] Data not available.
19:53:21:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:843 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:843 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:864 -> [UART, PM25] Reading data...
19:53:21:864 -> [UART, PM25] Data not available.
19:53:21:865 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:865 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:865 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:865 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:885 -> [UART, PM25] Reading data...
19:53:21:885 -> [UART, PM25] Data not available.
19:53:21:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:885 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:885 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:906 -> [UART, PM25] Reading data...
19:53:21:906 -> [UART, PM25] Data not available.
19:53:21:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:906 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:906 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:927 -> [UART, PM25] Reading data...
19:53:21:927 -> [UART, PM25] Data not available.
19:53:21:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:927 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:927 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:948 -> [UART, PM25] Reading data...
19:53:21:948 -> [UART, PM25] Data not available.
19:53:21:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:948 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:948 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:969 -> [UART, PM25] Reading data...
19:53:21:969 -> [UART, PM25] Data not available.
19:53:21:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:969 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:969 -> [UART, PM25] Uart available, resetting event queue..
19:53:21:990 -> [UART, PM25] Reading data...
19:53:21:990 -> [UART, PM25] Data not available.
19:53:21:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:21:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:21:990 -> [UART, PM25] Uart available, clearing write errors..
19:53:21:990 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:011 -> [UART, PM25] Reading data...
19:53:22:011 -> [UART, PM25] Data not available.
19:53:22:011 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:011 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:011 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:011 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:032 -> [UART, PM25] Reading data...
19:53:22:032 -> [UART, PM25] Data not available.
19:53:22:032 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:032 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:032 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:032 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:053 -> [UART, PM25] Reading data...
19:53:22:053 -> [UART, PM25] Data not available.
19:53:22:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:053 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:053 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:074 -> [UART, PM25] Reading data...
19:53:22:074 -> [UART, PM25] Data not available.
19:53:22:075 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:075 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:075 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:075 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:095 -> [UART, PM25] Reading data...
19:53:22:095 -> [UART, PM25] Data not available.
19:53:22:096 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:096 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:096 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:096 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:116 -> [UART, PM25] Reading data...
19:53:22:116 -> [UART, PM25] Data not available.
19:53:22:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:116 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:116 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:139 -> [UART, PM25] Reading data...
19:53:22:140 -> [UART, PM25] Data not available.
19:53:22:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:140 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:140 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:175 -> [UART, PM25] Reading data...
19:53:22:175 -> [UART, PM25] Data not available.
19:53:22:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:175 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:175 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:184 -> [UART, PM25] Reading data...
19:53:22:184 -> [UART, PM25] Data not available.
19:53:22:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:200 -> [UART, PM25] Reading data...
19:53:22:201 -> [UART, PM25] Data not available.
19:53:22:201 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:201 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:201 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:201 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:221 -> [UART, PM25] Reading data...
19:53:22:221 -> [UART, PM25] Data not available.
19:53:22:222 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:222 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:222 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:222 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:242 -> [UART, PM25] Reading data...
19:53:22:242 -> [UART, PM25] Data not available.
19:53:22:242 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:242 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:242 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:242 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:263 -> [UART, PM25] Reading data...
19:53:22:263 -> [UART, PM25] Data not available.
19:53:22:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:263 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:263 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:284 -> [UART, PM25] Reading data...
19:53:22:284 -> [UART, PM25] Data not available.
19:53:22:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:284 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:284 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:305 -> [UART, PM25] Reading data...
19:53:22:306 -> [UART, PM25] Data not available.
19:53:22:306 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:306 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:306 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:306 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:338 -> [UART, PM25] Reading data...
19:53:22:340 -> [UART, PM25] Data not available.
19:53:22:340 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:340 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:340 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:340 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:347 -> [UART, PM25] Reading data...
19:53:22:347 -> [UART, PM25] Data not available.
19:53:22:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:347 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:347 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:368 -> [UART, PM25] Reading data...
19:53:22:368 -> [UART, PM25] Data not available.
19:53:22:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:368 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:368 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:389 -> [UART, PM25] Reading data...
19:53:22:389 -> [UART, PM25] Data not available.
19:53:22:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:389 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:389 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:410 -> [UART, PM25] Reading data...
19:53:22:410 -> [UART, PM25] Data not available.
19:53:22:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:410 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:410 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:431 -> [UART, PM25] Reading data...
19:53:22:432 -> [UART, PM25] Data not available.
19:53:22:432 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:432 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:432 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:432 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:452 -> [UART, PM25] Reading data...
19:53:22:452 -> [UART, PM25] Data not available.
19:53:22:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:452 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:452 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:473 -> [UART, PM25] Reading data...
19:53:22:473 -> [UART, PM25] Data not available.
19:53:22:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:473 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:473 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:494 -> [UART, PM25] Reading data...
19:53:22:494 -> [UART, PM25] Data not available.
19:53:22:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:494 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:494 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:515 -> [UART, PM25] Reading data...
19:53:22:515 -> [UART, PM25] Data not available.
19:53:22:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:515 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:515 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:536 -> [UART, PM25] Reading data...
19:53:22:536 -> [UART, PM25] Data not available.
19:53:22:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:536 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:536 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:557 -> [UART, PM25] Reading data...
19:53:22:557 -> [UART, PM25] Data not available.
19:53:22:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:557 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:557 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:578 -> [UART, PM25] Reading data...
19:53:22:578 -> [UART, PM25] Data not available.
19:53:22:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:578 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:578 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:600 -> [UART, PM25] Reading data...
19:53:22:601 -> [UART, PM25] Data not available.
19:53:22:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:601 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:601 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:620 -> [UART, PM25] Reading data...
19:53:22:620 -> [UART, PM25] Data not available.
19:53:22:620 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:620 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:620 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:620 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:641 -> [UART, PM25] Reading data...
19:53:22:641 -> [UART, PM25] Data not available.
19:53:22:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:641 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:641 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:662 -> [UART, PM25] Reading data...
19:53:22:662 -> [UART, PM25] Data not available.
19:53:22:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:662 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:662 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:683 -> [UART, PM25] Reading data...
19:53:22:683 -> [UART, PM25] Data not available.
19:53:22:683 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:683 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:683 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:683 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:704 -> [UART, PM25] Reading data...
19:53:22:704 -> [UART, PM25] Data not available.
19:53:22:704 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:704 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:704 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:704 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:725 -> [UART, PM25] Reading data...
19:53:22:726 -> [UART, PM25] Data not available.
19:53:22:726 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:726 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:726 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:726 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:748 -> [UART, PM25] Reading data...
19:53:22:748 -> [UART, PM25] Data not available.
19:53:22:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:748 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:748 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:767 -> [UART, PM25] Reading data...
19:53:22:767 -> [UART, PM25] Data not available.
19:53:22:767 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:767 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:767 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:767 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:788 -> [UART, PM25] Reading data...
19:53:22:788 -> [UART, PM25] Data not available.
19:53:22:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:788 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:788 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:809 -> [UART, PM25] Reading data...
19:53:22:809 -> [UART, PM25] Data not available.
19:53:22:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:809 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:809 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:830 -> [UART, PM25] Reading data...
19:53:22:831 -> [UART, PM25] Data not available.
19:53:22:831 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:831 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:831 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:831 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:864 -> [UART, PM25] Reading data...
19:53:22:864 -> [UART, PM25] Data not available.
19:53:22:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:864 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:864 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:872 -> [UART, PM25] Reading data...
19:53:22:872 -> [UART, PM25] Data not available.
19:53:22:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:872 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:872 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:893 -> [UART, PM25] Reading data...
19:53:22:893 -> [UART, PM25] Data not available.
19:53:22:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:893 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:893 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:914 -> [UART, PM25] Reading data...
19:53:22:914 -> [UART, PM25] Data not available.
19:53:22:915 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:915 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:915 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:915 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:935 -> [UART, PM25] Reading data...
19:53:22:935 -> [UART, PM25] Data not available.
19:53:22:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:935 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:935 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:956 -> [UART, PM25] Reading data...
19:53:22:956 -> [UART, PM25] Data not available.
19:53:22:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:956 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:956 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:977 -> [UART, PM25] Reading data...
19:53:22:977 -> [UART, PM25] Data not available.
19:53:22:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:977 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:977 -> [UART, PM25] Uart available, resetting event queue..
19:53:22:998 -> [UART, PM25] Reading data...
19:53:22:998 -> [UART, PM25] Data not available.
19:53:22:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:22:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:22:998 -> [UART, PM25] Uart available, clearing write errors..
19:53:22:998 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:019 -> [UART, PM25] Reading data...
19:53:23:019 -> [UART, PM25] Data not available.
19:53:23:020 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:020 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:020 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:020 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:040 -> [UART, PM25] Reading data...
19:53:23:040 -> [UART, PM25] Data not available.
19:53:23:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:040 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:040 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:061 -> [UART, PM25] Reading data...
19:53:23:061 -> [UART, PM25] Data not available.
19:53:23:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:061 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:061 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:082 -> [UART, PM25] Reading data...
19:53:23:082 -> [UART, PM25] Data not available.
19:53:23:083 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:083 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:083 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:083 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:103 -> [UART, PM25] Reading data...
19:53:23:103 -> [UART, PM25] Data not available.
19:53:23:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:103 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:103 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:124 -> [UART, PM25] Reading data...
19:53:23:124 -> [UART, PM25] Data not available.
19:53:23:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:124 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:124 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:145 -> [UART, PM25] Reading data...
19:53:23:145 -> [UART, PM25] Data not available.
19:53:23:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:145 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:145 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:166 -> [UART, PM25] Reading data...
19:53:23:167 -> [UART, PM25] Data not available.
19:53:23:167 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:167 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:167 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:167 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:187 -> [UART, PM25] Reading data...
19:53:23:187 -> [UART, PM25] Data not available.
19:53:23:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:187 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:187 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:208 -> [UART, PM25] Reading data...
19:53:23:208 -> [UART, PM25] Data not available.
19:53:23:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:208 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:208 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:229 -> [UART, PM25] Reading data...
19:53:23:230 -> [UART, PM25] Data not available.
19:53:23:230 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:230 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:230 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:230 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:250 -> [UART, PM25] Reading data...
19:53:23:250 -> [UART, PM25] Data not available.
19:53:23:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:250 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:250 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:271 -> [UART, PM25] Reading data...
19:53:23:271 -> [UART, PM25] Data not available.
19:53:23:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:271 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:271 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:292 -> [UART, PM25] Reading data...
19:53:23:292 -> [UART, PM25] Data not available.
19:53:23:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:292 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:292 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:313 -> [UART, PM25] Reading data...
19:53:23:313 -> [UART, PM25] Data not available.
19:53:23:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:313 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:313 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:334 -> [UART, PM25] Reading data...
19:53:23:334 -> [UART, PM25] Data not available.
19:53:23:335 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:335 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:335 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:335 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:355 -> [UART, PM25] Reading data...
19:53:23:355 -> [UART, PM25] Data not available.
19:53:23:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:355 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:355 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:379 -> [UART, PM25] Reading data...
19:53:23:379 -> [UART, PM25] Data not available.
19:53:23:380 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:380 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:380 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:380 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:397 -> [UART, PM25] Reading data...
19:53:23:397 -> [UART, PM25] Data not available.
19:53:23:398 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:398 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:398 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:398 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:419 -> [UART, PM25] Reading data...
19:53:23:419 -> [UART, PM25] Data not available.
19:53:23:419 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:419 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:419 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:419 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:439 -> [UART, PM25] Reading data...
19:53:23:439 -> [UART, PM25] Data not available.
19:53:23:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:439 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:439 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:460 -> [UART, PM25] Reading data...
19:53:23:460 -> [UART, PM25] Data not available.
19:53:23:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:460 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:460 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:481 -> [UART, PM25] Reading data...
19:53:23:481 -> [UART, PM25] Data not available.
19:53:23:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:481 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:481 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:502 -> [UART, PM25] Reading data...
19:53:23:502 -> [UART, PM25] Data not available.
19:53:23:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:502 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:502 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:523 -> [UART, PM25] Reading data...
19:53:23:524 -> [UART, PM25] Data not available.
19:53:23:524 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:524 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:524 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:524 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:544 -> [UART, PM25] Reading data...
19:53:23:544 -> [UART, PM25] Data not available.
19:53:23:545 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:545 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:545 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:545 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:565 -> [UART, PM25] Reading data...
19:53:23:565 -> [UART, PM25] Data not available.
19:53:23:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:565 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:565 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:586 -> [UART, PM25] Reading data...
19:53:23:586 -> [UART, PM25] Data not available.
19:53:23:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:586 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:586 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:607 -> [UART, PM25] Reading data...
19:53:23:607 -> [UART, PM25] Data not available.
19:53:23:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:607 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:607 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:628 -> [UART, PM25] Reading data...
19:53:23:628 -> [UART, PM25] Data not available.
19:53:23:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:628 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:628 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:649 -> [UART, PM25] Reading data...
19:53:23:649 -> [UART, PM25] Data not available.
19:53:23:650 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:650 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:650 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:650 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:670 -> [UART, PM25] Reading data...
19:53:23:670 -> [UART, PM25] Data not available.
19:53:23:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:670 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:670 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:691 -> [UART, PM25] Reading data...
19:53:23:691 -> [UART, PM25] Data not available.
19:53:23:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:691 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:691 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:712 -> [UART, PM25] Reading data...
19:53:23:713 -> [UART, PM25] Data not available.
19:53:23:713 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:713 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:713 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:713 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:733 -> [UART, PM25] Reading data...
19:53:23:733 -> [UART, PM25] Data not available.
19:53:23:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:733 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:733 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:754 -> [UART, PM25] Reading data...
19:53:23:754 -> [UART, PM25] Data not available.
19:53:23:754 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:754 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:754 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:754 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:775 -> [UART, PM25] Reading data...
19:53:23:775 -> [UART, PM25] Data not available.
19:53:23:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:775 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:775 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:796 -> [UART, PM25] Reading data...
19:53:23:796 -> [UART, PM25] Data not available.
19:53:23:796 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:796 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:796 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:796 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:817 -> [UART, PM25] Reading data...
19:53:23:817 -> [UART, PM25] Data not available.
19:53:23:817 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:817 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:817 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:817 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:838 -> [UART, PM25] Reading data...
19:53:23:838 -> [UART, PM25] Data not available.
19:53:23:838 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:838 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:838 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:838 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:870 -> [UART, PM25] Reading data...
19:53:23:905 -> [UART, PM25] Data not available.
19:53:23:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:905 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:905 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:905 -> [UART, PM25] Reading data...
19:53:23:905 -> [UART, PM25] Data not available.
19:53:23:905 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:905 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:905 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:905 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:906 -> [UART, PM25] Reading data...
19:53:23:906 -> [UART, PM25] Data not available.
19:53:23:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:906 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:906 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:922 -> [UART, PM25] Reading data...
19:53:23:922 -> [UART, PM25] Data not available.
19:53:23:922 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:922 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:922 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:922 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:943 -> [UART, PM25] Reading data...
19:53:23:943 -> [UART, PM25] Data not available.
19:53:23:943 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:943 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:943 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:943 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:964 -> [UART, PM25] Reading data...
19:53:23:964 -> [UART, PM25] Data not available.
19:53:23:964 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:964 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:964 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:964 -> [UART, PM25] Uart available, resetting event queue..
19:53:23:985 -> [UART, PM25] Reading data...
19:53:23:986 -> [UART, PM25] Data not available.
19:53:23:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:23:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:23:986 -> [UART, PM25] Uart available, clearing write errors..
19:53:23:986 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:006 -> [UART, PM25] Reading data...
19:53:24:006 -> [UART, PM25] Data not available.
19:53:24:006 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:006 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:006 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:006 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:027 -> [UART, PM25] Reading data...
19:53:24:027 -> [UART, PM25] Data not available.
19:53:24:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:027 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:027 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:048 -> [UART, PM25] Reading data...
19:53:24:048 -> [UART, PM25] Data not available.
19:53:24:048 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:048 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:048 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:048 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:069 -> [UART, PM25] Reading data...
19:53:24:069 -> [UART, PM25] Data not available.
19:53:24:069 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:069 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:069 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:069 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:090 -> [UART, PM25] Reading data...
19:53:24:090 -> [UART, PM25] Data not available.
19:53:24:090 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:090 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:090 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:090 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:111 -> [UART, PM25] Reading data...
19:53:24:111 -> [UART, PM25] Data not available.
19:53:24:111 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:111 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:111 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:111 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:132 -> [UART, PM25] Reading data...
19:53:24:132 -> [UART, PM25] Data not available.
19:53:24:132 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:132 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:132 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:132 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:153 -> [UART, PM25] Reading data...
19:53:24:153 -> [UART, PM25] Data not available.
19:53:24:153 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:153 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:153 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:153 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:174 -> [UART, PM25] Reading data...
19:53:24:174 -> [UART, PM25] Data not available.
19:53:24:174 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:174 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:174 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:174 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:195 -> [UART, PM25] Reading data...
19:53:24:195 -> [UART, PM25] Data not available.
19:53:24:195 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:195 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:195 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:195 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:216 -> [UART, PM25] Reading data...
19:53:24:216 -> [UART, PM25] Data not available.
19:53:24:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:216 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:216 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:237 -> [UART, PM25] Reading data...
19:53:24:237 -> [UART, PM25] Data not available.
19:53:24:237 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:237 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:237 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:237 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:258 -> [UART, PM25] Reading data...
19:53:24:258 -> [UART, PM25] Data not available.
19:53:24:258 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:258 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:258 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:258 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:279 -> [UART, PM25] Reading data...
19:53:24:279 -> [UART, PM25] Data not available.
19:53:24:279 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:279 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:279 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:279 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:300 -> [UART, PM25] Reading data...
19:53:24:300 -> [UART, PM25] Data not available.
19:53:24:300 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:300 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:300 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:300 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:321 -> [UART, PM25] Reading data...
19:53:24:321 -> [UART, PM25] Data not available.
19:53:24:321 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:321 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:321 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:321 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:342 -> [UART, PM25] Reading data...
19:53:24:342 -> [UART, PM25] Data not available.
19:53:24:342 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:342 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:342 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:342 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:363 -> [UART, PM25] Reading data...
19:53:24:363 -> [UART, PM25] Data not available.
19:53:24:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:363 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:363 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:384 -> [UART, PM25] Reading data...
19:53:24:384 -> [UART, PM25] Data not available.
19:53:24:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:384 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:384 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:405 -> [UART, PM25] Reading data...
19:53:24:405 -> [UART, PM25] Data not available.
19:53:24:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:416 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:416 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:426 -> [UART, PM25] Reading data...
19:53:24:426 -> [UART, PM25] Data not available.
19:53:24:426 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:426 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:426 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:426 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:447 -> [UART, PM25] Reading data...
19:53:24:447 -> [UART, PM25] Data not available.
19:53:24:447 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:447 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:447 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:447 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:468 -> [UART, PM25] Reading data...
19:53:24:468 -> [UART, PM25] Data not available.
19:53:24:468 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:468 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:468 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:468 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:489 -> [UART, PM25] Reading data...
19:53:24:489 -> [UART, PM25] Data not available.
19:53:24:489 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:489 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:489 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:489 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:510 -> [UART, PM25] Reading data...
19:53:24:510 -> [UART, PM25] Data not available.
19:53:24:510 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:510 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:510 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:510 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:531 -> [UART, PM25] Reading data...
19:53:24:531 -> [UART, PM25] Data not available.
19:53:24:531 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:531 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:531 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:531 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:553 -> [UART, PM25] Reading data...
19:53:24:553 -> [UART, PM25] Data not available.
19:53:24:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:553 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:553 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:573 -> [UART, PM25] Reading data...
19:53:24:573 -> [UART, PM25] Data not available.
19:53:24:573 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:573 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:573 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:573 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:594 -> [UART, PM25] Reading data...
19:53:24:594 -> [UART, PM25] Data not available.
19:53:24:594 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:594 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:594 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:594 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:615 -> [UART, PM25] Reading data...
19:53:24:615 -> [UART, PM25] Data not available.
19:53:24:615 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:615 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:615 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:615 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:636 -> [UART, PM25] Reading data...
19:53:24:636 -> [UART, PM25] Data not available.
19:53:24:636 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:636 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:636 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:636 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:657 -> [UART, PM25] Reading data...
19:53:24:657 -> [UART, PM25] Data not available.
19:53:24:657 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:657 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:657 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:657 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:678 -> [UART, PM25] Reading data...
19:53:24:678 -> [UART, PM25] Data not available.
19:53:24:678 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:678 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:678 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:678 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:699 -> [UART, PM25] Reading data...
19:53:24:699 -> [UART, PM25] Data not available.
19:53:24:699 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:699 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:699 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:699 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:720 -> [UART, PM25] Reading data...
19:53:24:720 -> [UART, PM25] Data not available.
19:53:24:720 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:720 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:720 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:720 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:741 -> [UART, PM25] Reading data...
19:53:24:741 -> [UART, PM25] Data not available.
19:53:24:741 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:741 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:741 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:741 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:762 -> [UART, PM25] Reading data...
19:53:24:762 -> [UART, PM25] Data not available.
19:53:24:762 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:762 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:762 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:762 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:783 -> [UART, PM25] Reading data...
19:53:24:784 -> [UART, PM25] Data not available.
19:53:24:784 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:784 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:784 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:784 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:804 -> [UART, PM25] Reading data...
19:53:24:804 -> [UART, PM25] Data not available.
19:53:24:804 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:804 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:804 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:804 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:825 -> [UART, PM25] Reading data...
19:53:24:825 -> [UART, PM25] Data not available.
19:53:24:825 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:825 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:825 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:825 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:846 -> [UART, PM25] Reading data...
19:53:24:846 -> [UART, PM25] Data not available.
19:53:24:846 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:846 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:846 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:846 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:867 -> [UART, PM25] Reading data...
19:53:24:867 -> [UART, PM25] Data not available.
19:53:24:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:867 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:867 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:888 -> [UART, PM25] Reading data...
19:53:24:888 -> [UART, PM25] Data not available.
19:53:24:888 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:888 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:888 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:888 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:909 -> [UART, PM25] Reading data...
19:53:24:909 -> [UART, PM25] Data not available.
19:53:24:909 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:909 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:909 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:909 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:946 -> [UART, PM25] Reading data...
19:53:24:946 -> [UART, PM25] Data not available.
19:53:24:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:946 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:946 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:951 -> [UART, PM25] Reading data...
19:53:24:951 -> [UART, PM25] Data not available.
19:53:24:951 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:951 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:951 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:951 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:972 -> [UART, PM25] Reading data...
19:53:24:972 -> [UART, PM25] Data not available.
19:53:24:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:972 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:972 -> [UART, PM25] Uart available, resetting event queue..
19:53:24:993 -> [UART, PM25] Reading data...
19:53:24:993 -> [UART, PM25] Data not available.
19:53:24:993 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:24:993 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:24:993 -> [UART, PM25] Uart available, clearing write errors..
19:53:24:993 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:014 -> [UART, PM25] Reading data...
19:53:25:014 -> [UART, PM25] Data not available.
19:53:25:014 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:014 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:014 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:014 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:035 -> [UART, PM25] Reading data...
19:53:25:035 -> [UART, PM25] Data not available.
19:53:25:035 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:035 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:035 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:035 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:056 -> [UART, PM25] Reading data...
19:53:25:056 -> [UART, PM25] Data not available.
19:53:25:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:056 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:056 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:077 -> [UART, PM25] Reading data...
19:53:25:077 -> [UART, PM25] Data not available.
19:53:25:077 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:077 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:077 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:077 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:098 -> [UART, PM25] Reading data...
19:53:25:098 -> [UART, PM25] Data not available.
19:53:25:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:098 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:098 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:119 -> [UART, PM25] Reading data...
19:53:25:119 -> [UART, PM25] Data not available.
19:53:25:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:119 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:119 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:140 -> [UART, PM25] Reading data...
19:53:25:140 -> [UART, PM25] Data not available.
19:53:25:140 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:140 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:140 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:140 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:161 -> [UART, PM25] Reading data...
19:53:25:161 -> [UART, PM25] Data not available.
19:53:25:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:161 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:161 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:182 -> [UART, PM25] Reading data...
19:53:25:182 -> [UART, PM25] Data not available.
19:53:25:182 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:182 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:182 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:182 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:203 -> [UART, PM25] Reading data...
19:53:25:203 -> [UART, PM25] Data not available.
19:53:25:203 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:203 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:203 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:203 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:224 -> [UART, PM25] Reading data...
19:53:25:224 -> [UART, PM25] Data not available.
19:53:25:224 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:224 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:224 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:224 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:245 -> [UART, PM25] Reading data...
19:53:25:245 -> [UART, PM25] Data not available.
19:53:25:245 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:245 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:245 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:245 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:267 -> [UART, PM25] Reading data...
19:53:25:268 -> [UART, PM25] Data not available.
19:53:25:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:268 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:268 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:287 -> [UART, PM25] Reading data...
19:53:25:287 -> [UART, PM25] Data not available.
19:53:25:287 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:287 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:287 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:287 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:307 -> [UART, PM25] Reading data...
19:53:25:308 -> [UART, PM25] Data not available.
19:53:25:308 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:308 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:308 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:308 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:363 -> [UART, PM25] Reading data...
19:53:25:374 -> [UART, PM25] Data not available.
19:53:25:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:374 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:374 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:374 -> [UART, PM25] Reading data...
19:53:25:374 -> [UART, PM25] Data not available.
19:53:25:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:374 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:374 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:374 -> [UART, PM25] Reading data...
19:53:25:374 -> [UART, PM25] Data not available.
19:53:25:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:374 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:374 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:392 -> [UART, PM25] Reading data...
19:53:25:392 -> [UART, PM25] Data not available.
19:53:25:392 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:392 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:392 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:392 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:413 -> [UART, PM25] Reading data...
19:53:25:415 -> [UART, PM25] Data not available.
19:53:25:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:415 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:415 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:434 -> [UART, PM25] Reading data...
19:53:25:434 -> [UART, PM25] Data not available.
19:53:25:434 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:434 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:434 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:434 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:459 -> [UART, PM25] Reading data...
19:53:25:459 -> [UART, PM25] Data not available.
19:53:25:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:459 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:459 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:478 -> [UART, PM25] Reading data...
19:53:25:479 -> [UART, PM25] Data not available.
19:53:25:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:479 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:479 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:497 -> [UART, PM25] Reading data...
19:53:25:497 -> [UART, PM25] Data not available.
19:53:25:497 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:497 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:497 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:497 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:518 -> [UART, PM25] Reading data...
19:53:25:518 -> [UART, PM25] Data not available.
19:53:25:518 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:518 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:518 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:518 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:539 -> [UART, PM25] Reading data...
19:53:25:539 -> [UART, PM25] Data not available.
19:53:25:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:539 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:539 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:560 -> [UART, PM25] Reading data...
19:53:25:560 -> [UART, PM25] Data not available.
19:53:25:560 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:560 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:560 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:560 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:581 -> [UART, PM25] Reading data...
19:53:25:581 -> [UART, PM25] Data not available.
19:53:25:581 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:581 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:581 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:581 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:602 -> [UART, PM25] Reading data...
19:53:25:602 -> [UART, PM25] Data not available.
19:53:25:602 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:602 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:602 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:602 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:623 -> [UART, PM25] Reading data...
19:53:25:623 -> [UART, PM25] Data not available.
19:53:25:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:623 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:623 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:644 -> [UART, PM25] Reading data...
19:53:25:644 -> [UART, PM25] Data not available.
19:53:25:644 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:644 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:644 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:644 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:665 -> [UART, PM25] Reading data...
19:53:25:665 -> [UART, PM25] Data not available.
19:53:25:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:665 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:665 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:686 -> [UART, PM25] Reading data...
19:53:25:686 -> [UART, PM25] Data not available.
19:53:25:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:686 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:686 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:707 -> [UART, PM25] Reading data...
19:53:25:707 -> [UART, PM25] Data not available.
19:53:25:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:707 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:707 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:728 -> [UART, PM25] Reading data...
19:53:25:728 -> [UART, PM25] Data not available.
19:53:25:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:728 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:728 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:749 -> [UART, PM25] Reading data...
19:53:25:749 -> [UART, PM25] Data not available.
19:53:25:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:749 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:749 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:770 -> [UART, PM25] Reading data...
19:53:25:770 -> [UART, PM25] Data not available.
19:53:25:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:770 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:770 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:791 -> [UART, PM25] Reading data...
19:53:25:791 -> [UART, PM25] Data not available.
19:53:25:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:791 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:791 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:812 -> [UART, PM25] Reading data...
19:53:25:812 -> [UART, PM25] Data not available.
19:53:25:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:812 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:812 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:833 -> [UART, PM25] Reading data...
19:53:25:833 -> [UART, PM25] Data not available.
19:53:25:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:833 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:833 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:854 -> [UART, PM25] Reading data...
19:53:25:854 -> [UART, PM25] Data not available.
19:53:25:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:854 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:854 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:875 -> [UART, PM25] Reading data...
19:53:25:875 -> [UART, PM25] Data not available.
19:53:25:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:875 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:875 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:896 -> [UART, PM25] Reading data...
19:53:25:896 -> [UART, PM25] Data not available.
19:53:25:896 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:896 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:896 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:896 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:917 -> [UART, PM25] Reading data...
19:53:25:917 -> [UART, PM25] Data not available.
19:53:25:917 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:917 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:917 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:917 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:939 -> [UART, PM25] Reading data...
19:53:25:940 -> [UART, PM25] Data not available.
19:53:25:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:940 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:940 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:959 -> [UART, PM25] Reading data...
19:53:25:959 -> [UART, PM25] Data not available.
19:53:25:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:971 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:971 -> [UART, PM25] Uart available, resetting event queue..
19:53:25:980 -> [UART, PM25] Reading data...
19:53:25:980 -> [UART, PM25] Data not available.
19:53:25:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:25:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:25:980 -> [UART, PM25] Uart available, clearing write errors..
19:53:25:980 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:001 -> [UART, PM25] Reading data...
19:53:26:001 -> [UART, PM25] Data not available.
19:53:26:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:001 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:001 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:022 -> [UART, PM25] Reading data...
19:53:26:022 -> [UART, PM25] Data not available.
19:53:26:022 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:022 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:022 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:022 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:043 -> [UART, PM25] Reading data...
19:53:26:043 -> [UART, PM25] Data not available.
19:53:26:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:043 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:043 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:064 -> [UART, PM25] Reading data...
19:53:26:064 -> [UART, PM25] Data not available.
19:53:26:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:064 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:064 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:085 -> [UART, PM25] Reading data...
19:53:26:085 -> [UART, PM25] Data not available.
19:53:26:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:085 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:085 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:106 -> [UART, PM25] Reading data...
19:53:26:106 -> [UART, PM25] Data not available.
19:53:26:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:106 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:106 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:127 -> [UART, PM25] Reading data...
19:53:26:127 -> [UART, PM25] Data not available.
19:53:26:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:127 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:127 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:148 -> [UART, PM25] Reading data...
19:53:26:150 -> [UART, PM25] Data not available.
19:53:26:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:150 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:150 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:169 -> [UART, PM25] Reading data...
19:53:26:169 -> [UART, PM25] Data not available.
19:53:26:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:169 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:169 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:190 -> [UART, PM25] Reading data...
19:53:26:190 -> [UART, PM25] Data not available.
19:53:26:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:190 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:190 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:211 -> [UART, PM25] Reading data...
19:53:26:211 -> [UART, PM25] Data not available.
19:53:26:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:211 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:211 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:232 -> [UART, PM25] Reading data...
19:53:26:232 -> [UART, PM25] Data not available.
19:53:26:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:232 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:232 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:253 -> [UART, PM25] Reading data...
19:53:26:253 -> [UART, PM25] Data not available.
19:53:26:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:253 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:253 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:274 -> [UART, PM25] Reading data...
19:53:26:274 -> [UART, PM25] Data not available.
19:53:26:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:274 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:274 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:295 -> [UART, PM25] Reading data...
19:53:26:295 -> [UART, PM25] Data not available.
19:53:26:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:295 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:295 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:316 -> [UART, PM25] Reading data...
19:53:26:317 -> [UART, PM25] Data not available.
19:53:26:317 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:317 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:317 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:317 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:317 -> PING!
19:53:26:530 -> [UART, PM25] Reading data...
19:53:26:530 -> [UART, PM25] Data not available.
19:53:26:530 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:530 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:530 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:530 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:551 -> [UART, PM25] Reading data...
19:53:26:551 -> [UART, PM25] Data not available.
19:53:26:551 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:551 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:551 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:551 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:572 -> [UART, PM25] Reading data...
19:53:26:572 -> [UART, PM25] Data not available.
19:53:26:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:572 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:572 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:593 -> [UART, PM25] Reading data...
19:53:26:593 -> [UART, PM25] Data not available.
19:53:26:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:593 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:593 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:614 -> [UART, PM25] Reading data...
19:53:26:614 -> [UART, PM25] Data not available.
19:53:26:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:614 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:614 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:635 -> [UART, PM25] Reading data...
19:53:26:635 -> [UART, PM25] Data not available.
19:53:26:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:635 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:635 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:656 -> [UART, PM25] Reading data...
19:53:26:656 -> [UART, PM25] Data not available.
19:53:26:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:656 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:656 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:677 -> [UART, PM25] Reading data...
19:53:26:677 -> [UART, PM25] Data not available.
19:53:26:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:677 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:677 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:699 -> [UART, PM25] Reading data...
19:53:26:700 -> [UART, PM25] Data not available.
19:53:26:700 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:700 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:700 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:700 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:719 -> [UART, PM25] Reading data...
19:53:26:719 -> [UART, PM25] Data not available.
19:53:26:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:719 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:719 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:740 -> [UART, PM25] Reading data...
19:53:26:740 -> [UART, PM25] Data not available.
19:53:26:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:740 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:740 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:761 -> [UART, PM25] Reading data...
19:53:26:761 -> [UART, PM25] Data not available.
19:53:26:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:761 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:761 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:782 -> [UART, PM25] Reading data...
19:53:26:782 -> [UART, PM25] Data not available.
19:53:26:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:782 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:782 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:803 -> [UART, PM25] Reading data...
19:53:26:803 -> [UART, PM25] Data not available.
19:53:26:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:803 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:803 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:824 -> [UART, PM25] Reading data...
19:53:26:824 -> [UART, PM25] Data not available.
19:53:26:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:824 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:824 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:845 -> [UART, PM25] Reading data...
19:53:26:845 -> [UART, PM25] Data not available.
19:53:26:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:845 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:845 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:866 -> [UART, PM25] Reading data...
19:53:26:868 -> [UART, PM25] Data not available.
19:53:26:868 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:868 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:868 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:868 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:887 -> [UART, PM25] Reading data...
19:53:26:887 -> [UART, PM25] Data not available.
19:53:26:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:887 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:887 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:908 -> [UART, PM25] Reading data...
19:53:26:908 -> [UART, PM25] Data not available.
19:53:26:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:908 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:908 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:929 -> [UART, PM25] Reading data...
19:53:26:929 -> [UART, PM25] Data not available.
19:53:26:929 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:929 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:929 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:929 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:950 -> [UART, PM25] Reading data...
19:53:26:950 -> [UART, PM25] Data not available.
19:53:26:950 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:950 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:950 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:950 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:971 -> [UART, PM25] Reading data...
19:53:26:971 -> [UART, PM25] Data not available.
19:53:26:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:971 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:971 -> [UART, PM25] Uart available, resetting event queue..
19:53:26:998 -> [UART, PM25] Reading data...
19:53:26:998 -> [UART, PM25] Data not available.
19:53:26:999 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:26:999 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:26:999 -> [UART, PM25] Uart available, clearing write errors..
19:53:26:999 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:013 -> [UART, PM25] Reading data...
19:53:27:013 -> [UART, PM25] Data not available.
19:53:27:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:013 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:013 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:036 -> [UART, PM25] Reading data...
19:53:27:036 -> [UART, PM25] Data not available.
19:53:27:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:036 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:036 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:055 -> [UART, PM25] Reading data...
19:53:27:056 -> [UART, PM25] Data not available.
19:53:27:056 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:056 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:056 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:056 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:076 -> [UART, PM25] Reading data...
19:53:27:076 -> [UART, PM25] Data not available.
19:53:27:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:076 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:076 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:098 -> [UART, PM25] Reading data...
19:53:27:099 -> [UART, PM25] Data not available.
19:53:27:099 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:099 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:099 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:099 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:118 -> [UART, PM25] Reading data...
19:53:27:119 -> [UART, PM25] Data not available.
19:53:27:119 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:119 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:119 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:119 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:139 -> [UART, PM25] Reading data...
19:53:27:139 -> [UART, PM25] Data not available.
19:53:27:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:139 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:139 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:160 -> [UART, PM25] Reading data...
19:53:27:161 -> [UART, PM25] Data not available.
19:53:27:161 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:161 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:161 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:161 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:181 -> [UART, PM25] Reading data...
19:53:27:181 -> [UART, PM25] Data not available.
19:53:27:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:181 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:181 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:202 -> [UART, PM25] Reading data...
19:53:27:202 -> [UART, PM25] Data not available.
19:53:27:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:202 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:202 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:223 -> [UART, PM25] Reading data...
19:53:27:223 -> [UART, PM25] Data not available.
19:53:27:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:223 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:223 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:244 -> [UART, PM25] Reading data...
19:53:27:244 -> [UART, PM25] Data not available.
19:53:27:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:244 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:244 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:265 -> [UART, PM25] Reading data...
19:53:27:265 -> [UART, PM25] Data not available.
19:53:27:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:265 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:265 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:286 -> [UART, PM25] Reading data...
19:53:27:286 -> [UART, PM25] Data not available.
19:53:27:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:286 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:286 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:307 -> [UART, PM25] Reading data...
19:53:27:307 -> [UART, PM25] Data not available.
19:53:27:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:307 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:307 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:354 -> [UART, PM25] Reading data...
19:53:27:367 -> [UART, PM25] Data not available.
19:53:27:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:367 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:367 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:367 -> [UART, PM25] Reading data...
19:53:27:367 -> [UART, PM25] Data not available.
19:53:27:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:367 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:367 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:371 -> [UART, PM25] Reading data...
19:53:27:371 -> [UART, PM25] Data not available.
19:53:27:371 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:371 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:371 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:371 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:391 -> [UART, PM25] Reading data...
19:53:27:391 -> [UART, PM25] Data not available.
19:53:27:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:391 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:391 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:412 -> [UART, PM25] Reading data...
19:53:27:412 -> [UART, PM25] Data not available.
19:53:27:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:412 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:412 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:433 -> [UART, PM25] Reading data...
19:53:27:433 -> [UART, PM25] Data not available.
19:53:27:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:433 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:433 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:454 -> [UART, PM25] Reading data...
19:53:27:454 -> [UART, PM25] Data not available.
19:53:27:454 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:454 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:454 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:454 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:475 -> [UART, PM25] Reading data...
19:53:27:475 -> [UART, PM25] Data not available.
19:53:27:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:475 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:475 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:496 -> [UART, PM25] Reading data...
19:53:27:511 -> [UART, PM25] Data not available.
19:53:27:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:511 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:511 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:517 -> [UART, PM25] Reading data...
19:53:27:517 -> [UART, PM25] Data not available.
19:53:27:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:517 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:517 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:538 -> [UART, PM25] Reading data...
19:53:27:538 -> [UART, PM25] Data not available.
19:53:27:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:538 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:538 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:559 -> [UART, PM25] Reading data...
19:53:27:559 -> [UART, PM25] Data not available.
19:53:27:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:559 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:559 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:580 -> [UART, PM25] Reading data...
19:53:27:580 -> [UART, PM25] Data not available.
19:53:27:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:580 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:580 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:601 -> [UART, PM25] Reading data...
19:53:27:601 -> [UART, PM25] Data not available.
19:53:27:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:601 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:601 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:622 -> [UART, PM25] Reading data...
19:53:27:623 -> [UART, PM25] Data not available.
19:53:27:623 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:623 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:623 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:623 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:643 -> [UART, PM25] Reading data...
19:53:27:643 -> [UART, PM25] Data not available.
19:53:27:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:643 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:643 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:664 -> [UART, PM25] Reading data...
19:53:27:664 -> [UART, PM25] Data not available.
19:53:27:664 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:664 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:664 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:664 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:685 -> [UART, PM25] Reading data...
19:53:27:685 -> [UART, PM25] Data not available.
19:53:27:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:685 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:685 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:706 -> [UART, PM25] Reading data...
19:53:27:706 -> [UART, PM25] Data not available.
19:53:27:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:706 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:706 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:727 -> [UART, PM25] Reading data...
19:53:27:727 -> [UART, PM25] Data not available.
19:53:27:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:727 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:727 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:748 -> [UART, PM25] Reading data...
19:53:27:748 -> [UART, PM25] Data not available.
19:53:27:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:749 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:749 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:769 -> [UART, PM25] Reading data...
19:53:27:769 -> [UART, PM25] Data not available.
19:53:27:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:769 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:769 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:790 -> [UART, PM25] Reading data...
19:53:27:790 -> [UART, PM25] Data not available.
19:53:27:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:790 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:790 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:811 -> [UART, PM25] Reading data...
19:53:27:811 -> [UART, PM25] Data not available.
19:53:27:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:811 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:811 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:832 -> [UART, PM25] Reading data...
19:53:27:832 -> [UART, PM25] Data not available.
19:53:27:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:832 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:832 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:853 -> [UART, PM25] Reading data...
19:53:27:853 -> [UART, PM25] Data not available.
19:53:27:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:853 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:853 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:874 -> [UART, PM25] Reading data...
19:53:27:874 -> [UART, PM25] Data not available.
19:53:27:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:874 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:874 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:895 -> [UART, PM25] Reading data...
19:53:27:895 -> [UART, PM25] Data not available.
19:53:27:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:895 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:895 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:916 -> [UART, PM25] Reading data...
19:53:27:916 -> [UART, PM25] Data not available.
19:53:27:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:916 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:916 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:937 -> [UART, PM25] Reading data...
19:53:27:937 -> [UART, PM25] Data not available.
19:53:27:937 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:937 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:937 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:937 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:959 -> [UART, PM25] Reading data...
19:53:27:959 -> [UART, PM25] Data not available.
19:53:27:959 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:959 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:959 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:959 -> [UART, PM25] Uart available, resetting event queue..
19:53:27:980 -> [UART, PM25] Reading data...
19:53:27:984 -> [UART, PM25] Data not available.
19:53:27:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:27:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:27:984 -> [UART, PM25] Uart available, clearing write errors..
19:53:27:984 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:001 -> [UART, PM25] Reading data...
19:53:28:001 -> [UART, PM25] Data not available.
19:53:28:001 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:001 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:001 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:001 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:027 -> [UART, PM25] Reading data...
19:53:28:027 -> [UART, PM25] Data not available.
19:53:28:027 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:027 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:027 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:027 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:043 -> [UART, PM25] Reading data...
19:53:28:043 -> [UART, PM25] Data not available.
19:53:28:043 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:043 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:043 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:043 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:064 -> [UART, PM25] Reading data...
19:53:28:064 -> [UART, PM25] Data not available.
19:53:28:064 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:064 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:064 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:064 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:085 -> [UART, PM25] Reading data...
19:53:28:085 -> [UART, PM25] Data not available.
19:53:28:085 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:085 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:085 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:085 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:106 -> [UART, PM25] Reading data...
19:53:28:106 -> [UART, PM25] Data not available.
19:53:28:106 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:106 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:106 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:106 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:127 -> [UART, PM25] Reading data...
19:53:28:127 -> [UART, PM25] Data not available.
19:53:28:127 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:127 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:127 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:127 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:148 -> [UART, PM25] Reading data...
19:53:28:148 -> [UART, PM25] Data not available.
19:53:28:148 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:148 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:148 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:148 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:169 -> [UART, PM25] Reading data...
19:53:28:169 -> [UART, PM25] Data not available.
19:53:28:169 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:169 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:169 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:169 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:190 -> [UART, PM25] Reading data...
19:53:28:190 -> [UART, PM25] Data not available.
19:53:28:190 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:190 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:190 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:190 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:211 -> [UART, PM25] Reading data...
19:53:28:211 -> [UART, PM25] Data not available.
19:53:28:211 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:211 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:211 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:211 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:232 -> [UART, PM25] Reading data...
19:53:28:232 -> [UART, PM25] Data not available.
19:53:28:232 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:232 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:232 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:232 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:253 -> [UART, PM25] Reading data...
19:53:28:253 -> [UART, PM25] Data not available.
19:53:28:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:253 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:253 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:274 -> [UART, PM25] Reading data...
19:53:28:274 -> [UART, PM25] Data not available.
19:53:28:274 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:274 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:274 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:274 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:295 -> [UART, PM25] Reading data...
19:53:28:295 -> [UART, PM25] Data not available.
19:53:28:295 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:295 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:295 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:295 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:316 -> [UART, PM25] Reading data...
19:53:28:316 -> [UART, PM25] Data not available.
19:53:28:316 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:316 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:316 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:316 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:337 -> [UART, PM25] Reading data...
19:53:28:337 -> [UART, PM25] Data not available.
19:53:28:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:337 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:337 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:358 -> [UART, PM25] Reading data...
19:53:28:358 -> [UART, PM25] Data not available.
19:53:28:358 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:358 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:358 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:358 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:379 -> [UART, PM25] Reading data...
19:53:28:381 -> [UART, PM25] Data not available.
19:53:28:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:381 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:381 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:400 -> [UART, PM25] Reading data...
19:53:28:400 -> [UART, PM25] Data not available.
19:53:28:400 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:400 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:400 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:400 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:421 -> [UART, PM25] Reading data...
19:53:28:421 -> [UART, PM25] Data not available.
19:53:28:421 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:421 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:421 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:421 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:442 -> [UART, PM25] Reading data...
19:53:28:442 -> [UART, PM25] Data not available.
19:53:28:442 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:442 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:442 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:442 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:463 -> [UART, PM25] Reading data...
19:53:28:463 -> [UART, PM25] Data not available.
19:53:28:463 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:463 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:463 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:463 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:484 -> [UART, PM25] Reading data...
19:53:28:484 -> [UART, PM25] Data not available.
19:53:28:484 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:484 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:485 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:485 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:505 -> [UART, PM25] Reading data...
19:53:28:505 -> [UART, PM25] Data not available.
19:53:28:505 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:505 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:505 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:505 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:526 -> [UART, PM25] Reading data...
19:53:28:539 -> [UART, PM25] Data not available.
19:53:28:539 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:539 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:539 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:539 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:547 -> [UART, PM25] Reading data...
19:53:28:547 -> [UART, PM25] Data not available.
19:53:28:547 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:547 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:547 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:547 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:568 -> [UART, PM25] Reading data...
19:53:28:568 -> [UART, PM25] Data not available.
19:53:28:569 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:569 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:569 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:569 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:589 -> [UART, PM25] Reading data...
19:53:28:589 -> [UART, PM25] Data not available.
19:53:28:589 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:589 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:589 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:589 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:610 -> [UART, PM25] Reading data...
19:53:28:610 -> [UART, PM25] Data not available.
19:53:28:610 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:610 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:610 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:610 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:631 -> [UART, PM25] Reading data...
19:53:28:631 -> [UART, PM25] Data not available.
19:53:28:631 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:631 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:631 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:631 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:652 -> [UART, PM25] Reading data...
19:53:28:652 -> [UART, PM25] Data not available.
19:53:28:652 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:652 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:652 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:652 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:673 -> [UART, PM25] Reading data...
19:53:28:673 -> [UART, PM25] Data not available.
19:53:28:673 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:673 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:673 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:673 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:694 -> [UART, PM25] Reading data...
19:53:28:694 -> [UART, PM25] Data not available.
19:53:28:694 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:694 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:694 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:694 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:715 -> [UART, PM25] Reading data...
19:53:28:715 -> [UART, PM25] Data not available.
19:53:28:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:715 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:715 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:736 -> [UART, PM25] Reading data...
19:53:28:736 -> [UART, PM25] Data not available.
19:53:28:737 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:737 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:737 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:737 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:757 -> [UART, PM25] Reading data...
19:53:28:757 -> [UART, PM25] Data not available.
19:53:28:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:757 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:757 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:777 -> [UART, PM25] Reading data...
19:53:28:778 -> [UART, PM25] Data not available.
19:53:28:778 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:778 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:778 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:778 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:799 -> [UART, PM25] Reading data...
19:53:28:800 -> [UART, PM25] Data not available.
19:53:28:800 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:800 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:800 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:800 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:820 -> [UART, PM25] Reading data...
19:53:28:820 -> [UART, PM25] Data not available.
19:53:28:820 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:820 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:820 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:820 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:841 -> [UART, PM25] Reading data...
19:53:28:841 -> [UART, PM25] Data not available.
19:53:28:841 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:841 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:841 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:841 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:862 -> [UART, PM25] Reading data...
19:53:28:862 -> [UART, PM25] Data not available.
19:53:28:863 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:863 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:863 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:863 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:883 -> [UART, PM25] Reading data...
19:53:28:883 -> [UART, PM25] Data not available.
19:53:28:883 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:883 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:883 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:883 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:904 -> [UART, PM25] Reading data...
19:53:28:904 -> [UART, PM25] Data not available.
19:53:28:904 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:904 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:904 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:904 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:925 -> [UART, PM25] Reading data...
19:53:28:925 -> [UART, PM25] Data not available.
19:53:28:925 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:925 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:925 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:925 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:946 -> [UART, PM25] Reading data...
19:53:28:946 -> [UART, PM25] Data not available.
19:53:28:946 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:946 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:946 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:946 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:967 -> [UART, PM25] Reading data...
19:53:28:967 -> [UART, PM25] Data not available.
19:53:28:967 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:967 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:967 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:967 -> [UART, PM25] Uart available, resetting event queue..
19:53:28:988 -> [UART, PM25] Reading data...
19:53:28:988 -> [UART, PM25] Data not available.
19:53:28:988 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:28:988 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:28:988 -> [UART, PM25] Uart available, clearing write errors..
19:53:28:988 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:009 -> [UART, PM25] Reading data...
19:53:29:009 -> [UART, PM25] Data not available.
19:53:29:009 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:009 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:009 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:009 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:030 -> [UART, PM25] Reading data...
19:53:29:030 -> [UART, PM25] Data not available.
19:53:29:030 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:030 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:030 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:030 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:054 -> [UART, PM25] Reading data...
19:53:29:054 -> [UART, PM25] Data not available.
19:53:29:054 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:054 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:054 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:054 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:072 -> [UART, PM25] Reading data...
19:53:29:072 -> [UART, PM25] Data not available.
19:53:29:072 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:072 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:072 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:072 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:093 -> [UART, PM25] Reading data...
19:53:29:093 -> [UART, PM25] Data not available.
19:53:29:093 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:093 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:093 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:093 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:114 -> [UART, PM25] Reading data...
19:53:29:114 -> [UART, PM25] Data not available.
19:53:29:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:114 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:114 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:135 -> [UART, PM25] Reading data...
19:53:29:135 -> [UART, PM25] Data not available.
19:53:29:135 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:135 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:135 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:135 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:156 -> [UART, PM25] Reading data...
19:53:29:156 -> [UART, PM25] Data not available.
19:53:29:156 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:156 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:156 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:156 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:177 -> [UART, PM25] Reading data...
19:53:29:177 -> [UART, PM25] Data not available.
19:53:29:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:178 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:178 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:204 -> [UART, PM25] Reading data...
19:53:29:217 -> [UART, PM25] Data not available.
19:53:29:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:217 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:217 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:231 -> [UART, PM25] Reading data...
19:53:29:231 -> [UART, PM25] Data not available.
19:53:29:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:231 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:231 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:240 -> [UART, PM25] Reading data...
19:53:29:240 -> [UART, PM25] Data not available.
19:53:29:240 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:240 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:240 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:240 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:261 -> [UART, PM25] Reading data...
19:53:29:261 -> [UART, PM25] Data not available.
19:53:29:261 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:261 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:261 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:261 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:282 -> [UART, PM25] Reading data...
19:53:29:282 -> [UART, PM25] Data not available.
19:53:29:282 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:282 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:282 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:282 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:303 -> [UART, PM25] Reading data...
19:53:29:303 -> [UART, PM25] Data not available.
19:53:29:303 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:303 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:303 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:303 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:324 -> [UART, PM25] Reading data...
19:53:29:324 -> [UART, PM25] Data not available.
19:53:29:324 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:324 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:324 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:324 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:345 -> [UART, PM25] Reading data...
19:53:29:345 -> [UART, PM25] Data not available.
19:53:29:345 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:345 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:345 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:345 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:367 -> [UART, PM25] Reading data...
19:53:29:368 -> [UART, PM25] Data not available.
19:53:29:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:368 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:368 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:387 -> [UART, PM25] Reading data...
19:53:29:387 -> [UART, PM25] Data not available.
19:53:29:387 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:387 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:387 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:387 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:408 -> [UART, PM25] Reading data...
19:53:29:408 -> [UART, PM25] Data not available.
19:53:29:408 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:408 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:408 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:408 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:429 -> [UART, PM25] Reading data...
19:53:29:429 -> [UART, PM25] Data not available.
19:53:29:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:430 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:430 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:450 -> [UART, PM25] Reading data...
19:53:29:450 -> [UART, PM25] Data not available.
19:53:29:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:451 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:451 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:471 -> [UART, PM25] Reading data...
19:53:29:471 -> [UART, PM25] Data not available.
19:53:29:471 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:471 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:471 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:471 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:492 -> [UART, PM25] Reading data...
19:53:29:492 -> [UART, PM25] Data not available.
19:53:29:492 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:492 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:492 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:492 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:513 -> [UART, PM25] Reading data...
19:53:29:513 -> [UART, PM25] Data not available.
19:53:29:513 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:513 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:513 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:513 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:534 -> [UART, PM25] Reading data...
19:53:29:534 -> [UART, PM25] Data not available.
19:53:29:534 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:534 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:534 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:534 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:566 -> [UART, PM25] Reading data...
19:53:29:566 -> [UART, PM25] Data not available.
19:53:29:566 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:566 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:566 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:566 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:576 -> [UART, PM25] Reading data...
19:53:29:577 -> [UART, PM25] Data not available.
19:53:29:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:577 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:577 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:597 -> [UART, PM25] Reading data...
19:53:29:597 -> [UART, PM25] Data not available.
19:53:29:597 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:597 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:597 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:597 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:618 -> [UART, PM25] Reading data...
19:53:29:618 -> [UART, PM25] Data not available.
19:53:29:618 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:618 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:618 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:618 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:639 -> [UART, PM25] Reading data...
19:53:29:639 -> [UART, PM25] Data not available.
19:53:29:639 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:639 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:639 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:639 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:660 -> [UART, PM25] Reading data...
19:53:29:660 -> [UART, PM25] Data not available.
19:53:29:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:661 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:661 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:681 -> [UART, PM25] Reading data...
19:53:29:681 -> [UART, PM25] Data not available.
19:53:29:681 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:681 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:681 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:681 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:702 -> [UART, PM25] Reading data...
19:53:29:702 -> [UART, PM25] Data not available.
19:53:29:702 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:702 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:702 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:702 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:723 -> [UART, PM25] Reading data...
19:53:29:723 -> [UART, PM25] Data not available.
19:53:29:723 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:723 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:723 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:723 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:744 -> [UART, PM25] Reading data...
19:53:29:746 -> [UART, PM25] Data not available.
19:53:29:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:746 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:746 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:765 -> [UART, PM25] Reading data...
19:53:29:765 -> [UART, PM25] Data not available.
19:53:29:765 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:765 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:765 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:765 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:786 -> [UART, PM25] Reading data...
19:53:29:786 -> [UART, PM25] Data not available.
19:53:29:786 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:786 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:786 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:786 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:807 -> [UART, PM25] Reading data...
19:53:29:807 -> [UART, PM25] Data not available.
19:53:29:807 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:807 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:807 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:807 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:827 -> [UART, PM25] Reading data...
19:53:29:828 -> [UART, PM25] Data not available.
19:53:29:828 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:828 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:828 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:828 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:849 -> [UART, PM25] Reading data...
19:53:29:849 -> [UART, PM25] Data not available.
19:53:29:849 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:849 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:849 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:849 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:870 -> [UART, PM25] Reading data...
19:53:29:870 -> [UART, PM25] Data not available.
19:53:29:870 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:870 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:870 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:870 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:891 -> [UART, PM25] Reading data...
19:53:29:891 -> [UART, PM25] Data not available.
19:53:29:891 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:891 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:891 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:891 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:912 -> [UART, PM25] Reading data...
19:53:29:912 -> [UART, PM25] Data not available.
19:53:29:912 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:912 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:912 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:912 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:933 -> [UART, PM25] Reading data...
19:53:29:933 -> [UART, PM25] Data not available.
19:53:29:933 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:933 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:933 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:933 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:954 -> [UART, PM25] Reading data...
19:53:29:954 -> [UART, PM25] Data not available.
19:53:29:954 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:954 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:954 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:954 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:975 -> [UART, PM25] Reading data...
19:53:29:975 -> [UART, PM25] Data not available.
19:53:29:975 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:975 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:975 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:975 -> [UART, PM25] Uart available, resetting event queue..
19:53:29:996 -> [UART, PM25] Reading data...
19:53:29:996 -> [UART, PM25] Data not available.
19:53:29:996 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:29:996 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:29:996 -> [UART, PM25] Uart available, clearing write errors..
19:53:29:996 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:017 -> [UART, PM25] Reading data...
19:53:30:017 -> [UART, PM25] Data not available.
19:53:30:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:017 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:017 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:038 -> [UART, PM25] Reading data...
19:53:30:038 -> [UART, PM25] Data not available.
19:53:30:038 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:038 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:038 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:038 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:059 -> [UART, PM25] Reading data...
19:53:30:059 -> [UART, PM25] Data not available.
19:53:30:059 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:059 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:059 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:059 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:091 -> [UART, PM25] Reading data...
19:53:30:091 -> [UART, PM25] Data not available.
19:53:30:092 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:092 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:092 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:092 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:101 -> [UART, PM25] Reading data...
19:53:30:101 -> [UART, PM25] Data not available.
19:53:30:101 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:101 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:101 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:101 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:122 -> [UART, PM25] Reading data...
19:53:30:122 -> [UART, PM25] Data not available.
19:53:30:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:122 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:122 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:143 -> [UART, PM25] Reading data...
19:53:30:143 -> [UART, PM25] Data not available.
19:53:30:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:143 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:143 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:164 -> [UART, PM25] Reading data...
19:53:30:164 -> [UART, PM25] Data not available.
19:53:30:164 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:164 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:164 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:164 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:185 -> [UART, PM25] Reading data...
19:53:30:186 -> [UART, PM25] Data not available.
19:53:30:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:186 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:186 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:206 -> [UART, PM25] Reading data...
19:53:30:206 -> [UART, PM25] Data not available.
19:53:30:206 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:206 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:206 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:206 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:227 -> [UART, PM25] Reading data...
19:53:30:227 -> [UART, PM25] Data not available.
19:53:30:227 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:227 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:227 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:227 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:248 -> [UART, PM25] Reading data...
19:53:30:248 -> [UART, PM25] Data not available.
19:53:30:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:249 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:249 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:269 -> [UART, PM25] Reading data...
19:53:30:269 -> [UART, PM25] Data not available.
19:53:30:269 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:269 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:269 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:269 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:290 -> [UART, PM25] Reading data...
19:53:30:290 -> [UART, PM25] Data not available.
19:53:30:290 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:290 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:290 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:290 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:311 -> [UART, PM25] Reading data...
19:53:30:311 -> [UART, PM25] Data not available.
19:53:30:311 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:311 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:311 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:311 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:332 -> [UART, PM25] Reading data...
19:53:30:332 -> [UART, PM25] Data not available.
19:53:30:332 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:332 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:332 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:332 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:353 -> [UART, PM25] Reading data...
19:53:30:354 -> [UART, PM25] Data not available.
19:53:30:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:354 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:354 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:374 -> [UART, PM25] Reading data...
19:53:30:374 -> [UART, PM25] Data not available.
19:53:30:374 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:374 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:374 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:374 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:395 -> [UART, PM25] Reading data...
19:53:30:395 -> [UART, PM25] Data not available.
19:53:30:395 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:395 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:395 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:395 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:416 -> [UART, PM25] Reading data...
19:53:30:416 -> [UART, PM25] Data not available.
19:53:30:416 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:416 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:416 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:416 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:437 -> [UART, PM25] Reading data...
19:53:30:437 -> [UART, PM25] Data not available.
19:53:30:437 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:437 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:437 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:437 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:458 -> [UART, PM25] Reading data...
19:53:30:458 -> [UART, PM25] Data not available.
19:53:30:458 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:458 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:458 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:458 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:479 -> [UART, PM25] Reading data...
19:53:30:479 -> [UART, PM25] Data not available.
19:53:30:479 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:479 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:479 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:479 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:500 -> [UART, PM25] Reading data...
19:53:30:501 -> [UART, PM25] Data not available.
19:53:30:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:501 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:501 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:521 -> [UART, PM25] Reading data...
19:53:30:521 -> [UART, PM25] Data not available.
19:53:30:521 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:521 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:521 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:521 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:542 -> [UART, PM25] Reading data...
19:53:30:542 -> [UART, PM25] Data not available.
19:53:30:542 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:542 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:542 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:542 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:563 -> [UART, PM25] Reading data...
19:53:30:563 -> [UART, PM25] Data not available.
19:53:30:563 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:563 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:563 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:563 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:584 -> [UART, PM25] Reading data...
19:53:30:584 -> [UART, PM25] Data not available.
19:53:30:584 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:584 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:584 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:584 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:611 -> [UART, PM25] Reading data...
19:53:30:612 -> [UART, PM25] Data not available.
19:53:30:612 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:612 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:612 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:612 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:626 -> [UART, PM25] Reading data...
19:53:30:626 -> [UART, PM25] Data not available.
19:53:30:626 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:626 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:626 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:626 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:647 -> [UART, PM25] Reading data...
19:53:30:647 -> [UART, PM25] Data not available.
19:53:30:647 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:647 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:647 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:647 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:668 -> [UART, PM25] Reading data...
19:53:30:668 -> [UART, PM25] Data not available.
19:53:30:668 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:668 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:668 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:668 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:689 -> [UART, PM25] Reading data...
19:53:30:689 -> [UART, PM25] Data not available.
19:53:30:689 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:689 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:689 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:689 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:710 -> [UART, PM25] Reading data...
19:53:30:710 -> [UART, PM25] Data not available.
19:53:30:710 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:710 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:710 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:710 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:731 -> [UART, PM25] Reading data...
19:53:30:731 -> [UART, PM25] Data not available.
19:53:30:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:731 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:731 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:752 -> [UART, PM25] Reading data...
19:53:30:752 -> [UART, PM25] Data not available.
19:53:30:752 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:752 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:752 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:752 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:773 -> [UART, PM25] Reading data...
19:53:30:773 -> [UART, PM25] Data not available.
19:53:30:773 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:773 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:773 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:773 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:794 -> [UART, PM25] Reading data...
19:53:30:794 -> [UART, PM25] Data not available.
19:53:30:794 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:794 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:794 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:794 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:815 -> [UART, PM25] Reading data...
19:53:30:816 -> [UART, PM25] Data not available.
19:53:30:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:816 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:816 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:854 -> [UART, PM25] Reading data...
19:53:30:867 -> [UART, PM25] Data not available.
19:53:30:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:867 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:867 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:867 -> [UART, PM25] Reading data...
19:53:30:867 -> [UART, PM25] Data not available.
19:53:30:867 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:867 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:867 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:867 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:878 -> [UART, PM25] Reading data...
19:53:30:878 -> [UART, PM25] Data not available.
19:53:30:878 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:878 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:878 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:878 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:899 -> [UART, PM25] Reading data...
19:53:30:899 -> [UART, PM25] Data not available.
19:53:30:899 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:899 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:899 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:899 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:920 -> [UART, PM25] Reading data...
19:53:30:920 -> [UART, PM25] Data not available.
19:53:30:920 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:920 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:920 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:920 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:941 -> [UART, PM25] Reading data...
19:53:30:941 -> [UART, PM25] Data not available.
19:53:30:941 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:941 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:941 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:941 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:962 -> [UART, PM25] Reading data...
19:53:30:962 -> [UART, PM25] Data not available.
19:53:30:962 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:962 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:962 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:962 -> [UART, PM25] Uart available, resetting event queue..
19:53:30:983 -> [UART, PM25] Reading data...
19:53:30:983 -> [UART, PM25] Data not available.
19:53:30:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:30:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:30:983 -> [UART, PM25] Uart available, clearing write errors..
19:53:30:983 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:004 -> [UART, PM25] Reading data...
19:53:31:004 -> [UART, PM25] Data not available.
19:53:31:004 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:004 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:004 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:004 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:025 -> [UART, PM25] Reading data...
19:53:31:025 -> [UART, PM25] Data not available.
19:53:31:025 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:025 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:025 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:025 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:025 -> PING!
19:53:31:239 -> [UART, PM25] Reading data...
19:53:31:239 -> [UART, PM25] Data not available.
19:53:31:239 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:239 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:239 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:239 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:260 -> [UART, PM25] Reading data...
19:53:31:260 -> [UART, PM25] Data not available.
19:53:31:260 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:260 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:260 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:260 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:281 -> [UART, PM25] Reading data...
19:53:31:281 -> [UART, PM25] Data not available.
19:53:31:281 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:281 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:281 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:281 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:302 -> [UART, PM25] Reading data...
19:53:31:302 -> [UART, PM25] Data not available.
19:53:31:302 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:302 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:302 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:302 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:323 -> [UART, PM25] Reading data...
19:53:31:323 -> [UART, PM25] Data not available.
19:53:31:323 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:323 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:323 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:323 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:344 -> [UART, PM25] Reading data...
19:53:31:344 -> [UART, PM25] Data not available.
19:53:31:344 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:344 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:344 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:344 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:365 -> [UART, PM25] Reading data...
19:53:31:366 -> [UART, PM25] Data not available.
19:53:31:366 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:366 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:366 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:366 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:386 -> [UART, PM25] Reading data...
19:53:31:386 -> [UART, PM25] Data not available.
19:53:31:386 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:386 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:386 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:386 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:407 -> [UART, PM25] Reading data...
19:53:31:407 -> [UART, PM25] Data not available.
19:53:31:407 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:407 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:407 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:407 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:428 -> [UART, PM25] Reading data...
19:53:31:428 -> [UART, PM25] Data not available.
19:53:31:428 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:428 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:428 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:428 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:449 -> [UART, PM25] Reading data...
19:53:31:449 -> [UART, PM25] Data not available.
19:53:31:450 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:450 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:450 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:450 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:470 -> [UART, PM25] Reading data...
19:53:31:470 -> [UART, PM25] Data not available.
19:53:31:470 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:470 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:470 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:470 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:491 -> [UART, PM25] Reading data...
19:53:31:491 -> [UART, PM25] Data not available.
19:53:31:491 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:491 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:491 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:491 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:512 -> [UART, PM25] Reading data...
19:53:31:512 -> [UART, PM25] Data not available.
19:53:31:512 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:512 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:512 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:512 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:533 -> [UART, PM25] Reading data...
19:53:31:533 -> [UART, PM25] Data not available.
19:53:31:533 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:533 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:533 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:533 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:554 -> [UART, PM25] Reading data...
19:53:31:554 -> [UART, PM25] Data not available.
19:53:31:554 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:554 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:554 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:554 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:575 -> [UART, PM25] Reading data...
19:53:31:575 -> [UART, PM25] Data not available.
19:53:31:575 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:575 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:575 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:575 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:596 -> [UART, PM25] Reading data...
19:53:31:596 -> [UART, PM25] Data not available.
19:53:31:596 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:596 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:596 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:596 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:617 -> [UART, PM25] Reading data...
19:53:31:617 -> [UART, PM25] Data not available.
19:53:31:617 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:617 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:617 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:617 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:653 -> [UART, PM25] Reading data...
19:53:31:654 -> [UART, PM25] Data not available.
19:53:31:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:654 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:654 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:659 -> [UART, PM25] Reading data...
19:53:31:659 -> [UART, PM25] Data not available.
19:53:31:659 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:659 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:659 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:659 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:680 -> [UART, PM25] Reading data...
19:53:31:680 -> [UART, PM25] Data not available.
19:53:31:680 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:680 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:680 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:680 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:701 -> [UART, PM25] Reading data...
19:53:31:701 -> [UART, PM25] Data not available.
19:53:31:701 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:701 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:701 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:701 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:722 -> [UART, PM25] Reading data...
19:53:31:722 -> [UART, PM25] Data not available.
19:53:31:722 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:722 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:722 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:722 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:743 -> [UART, PM25] Reading data...
19:53:31:743 -> [UART, PM25] Data not available.
19:53:31:743 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:743 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:743 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:743 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:764 -> [UART, PM25] Reading data...
19:53:31:764 -> [UART, PM25] Data not available.
19:53:31:764 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:764 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:764 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:764 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:785 -> [UART, PM25] Reading data...
19:53:31:785 -> [UART, PM25] Data not available.
19:53:31:785 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:785 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:785 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:785 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:806 -> [UART, PM25] Reading data...
19:53:31:806 -> [UART, PM25] Data not available.
19:53:31:806 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:806 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:806 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:806 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:827 -> [UART, PM25] Reading data...
19:53:31:827 -> [UART, PM25] Data not available.
19:53:31:827 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:827 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:827 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:827 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:848 -> [UART, PM25] Reading data...
19:53:31:848 -> [UART, PM25] Data not available.
19:53:31:848 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:848 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:848 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:848 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:869 -> [UART, PM25] Reading data...
19:53:31:869 -> [UART, PM25] Data not available.
19:53:31:869 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:869 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:869 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:869 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:890 -> [UART, PM25] Reading data...
19:53:31:890 -> [UART, PM25] Data not available.
19:53:31:890 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:890 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:890 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:890 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:911 -> [UART, PM25] Reading data...
19:53:31:911 -> [UART, PM25] Data not available.
19:53:31:911 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:911 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:911 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:911 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:932 -> [UART, PM25] Reading data...
19:53:31:932 -> [UART, PM25] Data not available.
19:53:31:932 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:932 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:932 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:932 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:953 -> [UART, PM25] Reading data...
19:53:31:953 -> [UART, PM25] Data not available.
19:53:31:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:953 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:953 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:974 -> [UART, PM25] Reading data...
19:53:31:974 -> [UART, PM25] Data not available.
19:53:31:974 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:974 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:974 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:974 -> [UART, PM25] Uart available, resetting event queue..
19:53:31:995 -> [UART, PM25] Reading data...
19:53:31:995 -> [UART, PM25] Data not available.
19:53:31:995 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:31:995 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:31:995 -> [UART, PM25] Uart available, clearing write errors..
19:53:31:995 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:017 -> [UART, PM25] Reading data...
19:53:32:017 -> [UART, PM25] Data not available.
19:53:32:017 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:017 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:017 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:017 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:037 -> [UART, PM25] Reading data...
19:53:32:037 -> [UART, PM25] Data not available.
19:53:32:037 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:037 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:037 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:037 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:058 -> [UART, PM25] Reading data...
19:53:32:058 -> [UART, PM25] Data not available.
19:53:32:058 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:058 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:058 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:058 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:079 -> [UART, PM25] Reading data...
19:53:32:079 -> [UART, PM25] Data not available.
19:53:32:079 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:079 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:079 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:079 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:100 -> [UART, PM25] Reading data...
19:53:32:100 -> [UART, PM25] Data not available.
19:53:32:100 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:100 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:100 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:100 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:121 -> [UART, PM25] Reading data...
19:53:32:122 -> [UART, PM25] Data not available.
19:53:32:122 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:122 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:122 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:122 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:142 -> [UART, PM25] Reading data...
19:53:32:143 -> [UART, PM25] Data not available.
19:53:32:143 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:143 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:143 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:143 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:176 -> [UART, PM25] Reading data...
19:53:32:177 -> [UART, PM25] Data not available.
19:53:32:177 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:177 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:177 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:177 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:184 -> [UART, PM25] Reading data...
19:53:32:184 -> [UART, PM25] Data not available.
19:53:32:184 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:184 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:184 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:184 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:205 -> [UART, PM25] Reading data...
19:53:32:205 -> [UART, PM25] Data not available.
19:53:32:205 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:205 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:205 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:205 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:226 -> [UART, PM25] Reading data...
19:53:32:226 -> [UART, PM25] Data not available.
19:53:32:226 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:226 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:226 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:226 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:247 -> [UART, PM25] Reading data...
19:53:32:248 -> [UART, PM25] Data not available.
19:53:32:248 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:248 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:248 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:248 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:268 -> [UART, PM25] Reading data...
19:53:32:268 -> [UART, PM25] Data not available.
19:53:32:268 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:268 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:268 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:268 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:289 -> [UART, PM25] Reading data...
19:53:32:289 -> [UART, PM25] Data not available.
19:53:32:289 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:289 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:289 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:289 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:310 -> [UART, PM25] Reading data...
19:53:32:310 -> [UART, PM25] Data not available.
19:53:32:310 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:310 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:310 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:310 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:331 -> [UART, PM25] Reading data...
19:53:32:331 -> [UART, PM25] Data not available.
19:53:32:331 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:331 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:331 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:331 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:352 -> [UART, PM25] Reading data...
19:53:32:352 -> [UART, PM25] Data not available.
19:53:32:352 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:352 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:352 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:352 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:373 -> [UART, PM25] Reading data...
19:53:32:373 -> [UART, PM25] Data not available.
19:53:32:373 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:373 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:373 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:373 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:394 -> [UART, PM25] Reading data...
19:53:32:394 -> [UART, PM25] Data not available.
19:53:32:394 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:394 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:394 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:394 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:414 -> [UART, PM25] Reading data...
19:53:32:415 -> [UART, PM25] Data not available.
19:53:32:415 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:415 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:415 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:415 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:436 -> [UART, PM25] Reading data...
19:53:32:436 -> [UART, PM25] Data not available.
19:53:32:436 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:436 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:436 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:436 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:457 -> [UART, PM25] Reading data...
19:53:32:457 -> [UART, PM25] Data not available.
19:53:32:457 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:457 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:457 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:457 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:477 -> [UART, PM25] Reading data...
19:53:32:478 -> [UART, PM25] Data not available.
19:53:32:478 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:478 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:478 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:478 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:499 -> [UART, PM25] Reading data...
19:53:32:499 -> [UART, PM25] Data not available.
19:53:32:499 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:499 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:499 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:499 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:520 -> [UART, PM25] Reading data...
19:53:32:520 -> [UART, PM25] Data not available.
19:53:32:520 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:520 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:520 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:520 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:541 -> [UART, PM25] Reading data...
19:53:32:541 -> [UART, PM25] Data not available.
19:53:32:541 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:541 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:541 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:541 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:562 -> [UART, PM25] Reading data...
19:53:32:562 -> [UART, PM25] Data not available.
19:53:32:562 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:562 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:562 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:562 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:583 -> [UART, PM25] Reading data...
19:53:32:583 -> [UART, PM25] Data not available.
19:53:32:583 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:583 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:583 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:583 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:604 -> [UART, PM25] Reading data...
19:53:32:604 -> [UART, PM25] Data not available.
19:53:32:604 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:604 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:604 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:604 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:625 -> [UART, PM25] Reading data...
19:53:32:625 -> [UART, PM25] Data not available.
19:53:32:625 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:625 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:625 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:625 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:646 -> [UART, PM25] Reading data...
19:53:32:646 -> [UART, PM25] Data not available.
19:53:32:646 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:646 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:646 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:646 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:667 -> [UART, PM25] Reading data...
19:53:32:667 -> [UART, PM25] Data not available.
19:53:32:667 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:667 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:667 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:667 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:695 -> [UART, PM25] Reading data...
19:53:32:696 -> [UART, PM25] Data not available.
19:53:32:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:696 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:696 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:709 -> [UART, PM25] Reading data...
19:53:32:709 -> [UART, PM25] Data not available.
19:53:32:709 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:709 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:709 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:709 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:730 -> [UART, PM25] Reading data...
19:53:32:730 -> [UART, PM25] Data not available.
19:53:32:730 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:730 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:730 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:730 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:751 -> [UART, PM25] Reading data...
19:53:32:751 -> [UART, PM25] Data not available.
19:53:32:751 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:751 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:751 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:751 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:772 -> [UART, PM25] Reading data...
19:53:32:772 -> [UART, PM25] Data not available.
19:53:32:772 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:772 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:772 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:772 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:793 -> [UART, PM25] Reading data...
19:53:32:793 -> [UART, PM25] Data not available.
19:53:32:793 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:793 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:793 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:793 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:816 -> [UART, PM25] Reading data...
19:53:32:837 -> [UART, PM25] Data not available.
19:53:32:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:837 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:837 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:852 -> [UART, PM25] Reading data...
19:53:32:852 -> [UART, PM25] Data not available.
19:53:32:852 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:852 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:852 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:852 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:856 -> [UART, PM25] Reading data...
19:53:32:856 -> [UART, PM25] Data not available.
19:53:32:856 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:856 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:856 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:856 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:877 -> [UART, PM25] Reading data...
19:53:32:877 -> [UART, PM25] Data not available.
19:53:32:877 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:877 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:877 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:877 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:898 -> [UART, PM25] Reading data...
19:53:32:898 -> [UART, PM25] Data not available.
19:53:32:898 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:898 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:898 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:898 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:919 -> [UART, PM25] Reading data...
19:53:32:919 -> [UART, PM25] Data not available.
19:53:32:919 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:919 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:919 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:919 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:940 -> [UART, PM25] Reading data...
19:53:32:940 -> [UART, PM25] Data not available.
19:53:32:940 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:940 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:940 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:940 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:961 -> [UART, PM25] Reading data...
19:53:32:961 -> [UART, PM25] Data not available.
19:53:32:961 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:961 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:961 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:961 -> [UART, PM25] Uart available, resetting event queue..
19:53:32:982 -> [UART, PM25] Reading data...
19:53:32:983 -> [UART, PM25] Data not available.
19:53:32:983 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:32:983 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:32:983 -> [UART, PM25] Uart available, clearing write errors..
19:53:32:983 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:003 -> [UART, PM25] Reading data...
19:53:33:003 -> [UART, PM25] Data not available.
19:53:33:003 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:003 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:003 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:003 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:024 -> [UART, PM25] Reading data...
19:53:33:024 -> [UART, PM25] Data not available.
19:53:33:024 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:024 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:024 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:024 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:045 -> [UART, PM25] Reading data...
19:53:33:045 -> [UART, PM25] Data not available.
19:53:33:045 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:045 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:045 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:045 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:066 -> [UART, PM25] Reading data...
19:53:33:066 -> [UART, PM25] Data not available.
19:53:33:066 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:066 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:066 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:066 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:087 -> [UART, PM25] Reading data...
19:53:33:087 -> [UART, PM25] Data not available.
19:53:33:087 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:087 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:087 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:087 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:108 -> [UART, PM25] Reading data...
19:53:33:108 -> [UART, PM25] Data not available.
19:53:33:108 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:108 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:108 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:108 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:129 -> [UART, PM25] Reading data...
19:53:33:129 -> [UART, PM25] Data not available.
19:53:33:129 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:129 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:129 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:129 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:150 -> [UART, PM25] Reading data...
19:53:33:150 -> [UART, PM25] Data not available.
19:53:33:150 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:150 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:150 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:150 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:171 -> [UART, PM25] Reading data...
19:53:33:171 -> [UART, PM25] Data not available.
19:53:33:171 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:171 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:171 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:171 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:192 -> [UART, PM25] Reading data...
19:53:33:192 -> [UART, PM25] Data not available.
19:53:33:192 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:192 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:192 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:192 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:216 -> [UART, PM25] Reading data...
19:53:33:216 -> [UART, PM25] Data not available.
19:53:33:216 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:216 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:216 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:216 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:234 -> [UART, PM25] Reading data...
19:53:33:234 -> [UART, PM25] Data not available.
19:53:33:234 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:234 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:234 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:234 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:255 -> [UART, PM25] Reading data...
19:53:33:255 -> [UART, PM25] Data not available.
19:53:33:255 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:255 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:255 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:255 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:276 -> [UART, PM25] Reading data...
19:53:33:276 -> [UART, PM25] Data not available.
19:53:33:276 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:276 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:276 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:276 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:297 -> [UART, PM25] Reading data...
19:53:33:298 -> [UART, PM25] Data not available.
19:53:33:298 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:298 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:298 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:298 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:318 -> [UART, PM25] Reading data...
19:53:33:318 -> [UART, PM25] Data not available.
19:53:33:318 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:318 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:318 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:318 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:339 -> [UART, PM25] Reading data...
19:53:33:339 -> [UART, PM25] Data not available.
19:53:33:339 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:339 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:339 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:339 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:360 -> [UART, PM25] Reading data...
19:53:33:360 -> [UART, PM25] Data not available.
19:53:33:360 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:360 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:360 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:360 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:381 -> [UART, PM25] Reading data...
19:53:33:381 -> [UART, PM25] Data not available.
19:53:33:381 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:381 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:381 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:381 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:402 -> [UART, PM25] Reading data...
19:53:33:402 -> [UART, PM25] Data not available.
19:53:33:402 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:402 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:402 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:402 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:423 -> [UART, PM25] Reading data...
19:53:33:423 -> [UART, PM25] Data not available.
19:53:33:423 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:423 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:423 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:423 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:444 -> [UART, PM25] Reading data...
19:53:33:444 -> [UART, PM25] Data not available.
19:53:33:444 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:444 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:444 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:444 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:465 -> [UART, PM25] Reading data...
19:53:33:465 -> [UART, PM25] Data not available.
19:53:33:465 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:465 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:465 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:465 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:486 -> [UART, PM25] Reading data...
19:53:33:486 -> [UART, PM25] Data not available.
19:53:33:486 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:486 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:486 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:486 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:507 -> [UART, PM25] Reading data...
19:53:33:507 -> [UART, PM25] Data not available.
19:53:33:507 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:507 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:507 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:507 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:528 -> [UART, PM25] Reading data...
19:53:33:528 -> [UART, PM25] Data not available.
19:53:33:528 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:528 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:528 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:528 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:549 -> [UART, PM25] Reading data...
19:53:33:549 -> [UART, PM25] Data not available.
19:53:33:549 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:549 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:549 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:549 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:570 -> [UART, PM25] Reading data...
19:53:33:570 -> [UART, PM25] Data not available.
19:53:33:570 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:570 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:570 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:570 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:591 -> [UART, PM25] Reading data...
19:53:33:591 -> [UART, PM25] Data not available.
19:53:33:591 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:591 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:591 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:591 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:612 -> [UART, PM25] Reading data...
19:53:33:613 -> [UART, PM25] Data not available.
19:53:33:613 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:613 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:613 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:613 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:633 -> [UART, PM25] Reading data...
19:53:33:633 -> [UART, PM25] Data not available.
19:53:33:633 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:633 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:633 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:633 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:654 -> [UART, PM25] Reading data...
19:53:33:654 -> [UART, PM25] Data not available.
19:53:33:654 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:654 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:654 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:654 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:675 -> [UART, PM25] Reading data...
19:53:33:675 -> [UART, PM25] Data not available.
19:53:33:675 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:675 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:675 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:675 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:695 -> [UART, PM25] Reading data...
19:53:33:696 -> [UART, PM25] Data not available.
19:53:33:696 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:696 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:696 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:696 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:730 -> [UART, PM25] Reading data...
19:53:33:731 -> [UART, PM25] Data not available.
19:53:33:731 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:731 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:731 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:731 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:738 -> [UART, PM25] Reading data...
19:53:33:738 -> [UART, PM25] Data not available.
19:53:33:738 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:738 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:738 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:738 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:759 -> [UART, PM25] Reading data...
19:53:33:759 -> [UART, PM25] Data not available.
19:53:33:759 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:759 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:759 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:759 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:780 -> [UART, PM25] Reading data...
19:53:33:780 -> [UART, PM25] Data not available.
19:53:33:780 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:780 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:780 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:780 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:801 -> [UART, PM25] Reading data...
19:53:33:801 -> [UART, PM25] Data not available.
19:53:33:801 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:801 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:801 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:801 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:822 -> [UART, PM25] Reading data...
19:53:33:822 -> [UART, PM25] Data not available.
19:53:33:822 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:822 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:822 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:822 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:843 -> [UART, PM25] Reading data...
19:53:33:843 -> [UART, PM25] Data not available.
19:53:33:843 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:843 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:843 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:843 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:864 -> [UART, PM25] Reading data...
19:53:33:864 -> [UART, PM25] Data not available.
19:53:33:864 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:864 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:864 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:864 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:885 -> [UART, PM25] Reading data...
19:53:33:885 -> [UART, PM25] Data not available.
19:53:33:885 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:885 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:885 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:885 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:906 -> [UART, PM25] Reading data...
19:53:33:906 -> [UART, PM25] Data not available.
19:53:33:906 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:906 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:906 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:906 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:927 -> [UART, PM25] Reading data...
19:53:33:927 -> [UART, PM25] Data not available.
19:53:33:927 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:927 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:927 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:927 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:948 -> [UART, PM25] Reading data...
19:53:33:948 -> [UART, PM25] Data not available.
19:53:33:948 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:948 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:948 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:948 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:969 -> [UART, PM25] Reading data...
19:53:33:969 -> [UART, PM25] Data not available.
19:53:33:969 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:969 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:969 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:969 -> [UART, PM25] Uart available, resetting event queue..
19:53:33:990 -> [UART, PM25] Reading data...
19:53:33:990 -> [UART, PM25] Data not available.
19:53:33:990 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:33:990 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:33:990 -> [UART, PM25] Uart available, clearing write errors..
19:53:33:990 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:011 -> [UART, PM25] Reading data...
19:53:34:011 -> [UART, PM25] Data not available.
19:53:34:012 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:012 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:012 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:012 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:034 -> [UART, PM25] Reading data...
19:53:34:036 -> [UART, PM25] Data not available.
19:53:34:036 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:036 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:036 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:036 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:053 -> [UART, PM25] Reading data...
19:53:34:053 -> [UART, PM25] Data not available.
19:53:34:053 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:053 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:053 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:053 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:073 -> [UART, PM25] Reading data...
19:53:34:074 -> [UART, PM25] Data not available.
19:53:34:074 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:074 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:074 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:074 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:095 -> [UART, PM25] Reading data...
19:53:34:095 -> [UART, PM25] Data not available.
19:53:34:095 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:095 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:095 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:095 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:116 -> [UART, PM25] Reading data...
19:53:34:116 -> [UART, PM25] Data not available.
19:53:34:116 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:116 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:116 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:116 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:137 -> [UART, PM25] Reading data...
19:53:34:137 -> [UART, PM25] Data not available.
19:53:34:137 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:137 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:137 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:137 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:158 -> [UART, PM25] Reading data...
19:53:34:158 -> [UART, PM25] Data not available.
19:53:34:158 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:158 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:158 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:158 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:179 -> [UART, PM25] Reading data...
19:53:34:179 -> [UART, PM25] Data not available.
19:53:34:179 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:179 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:179 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:179 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:201 -> [UART, PM25] Reading data...
19:53:34:202 -> [UART, PM25] Data not available.
19:53:34:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:202 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:202 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:221 -> [UART, PM25] Reading data...
19:53:34:221 -> [UART, PM25] Data not available.
19:53:34:221 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:221 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:221 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:221 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:252 -> [UART, PM25] Reading data...
19:53:34:253 -> [UART, PM25] Data not available.
19:53:34:253 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:253 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:253 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:253 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:263 -> [UART, PM25] Reading data...
19:53:34:263 -> [UART, PM25] Data not available.
19:53:34:263 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:263 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:263 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:263 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:284 -> [UART, PM25] Reading data...
19:53:34:284 -> [UART, PM25] Data not available.
19:53:34:284 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:284 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:284 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:284 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:305 -> [UART, PM25] Reading data...
19:53:34:305 -> [UART, PM25] Data not available.
19:53:34:305 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:305 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:305 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:305 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:326 -> [UART, PM25] Reading data...
19:53:34:326 -> [UART, PM25] Data not available.
19:53:34:326 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:326 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:326 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:326 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:347 -> [UART, PM25] Reading data...
19:53:34:347 -> [UART, PM25] Data not available.
19:53:34:347 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:347 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:347 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:347 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:368 -> [UART, PM25] Reading data...
19:53:34:368 -> [UART, PM25] Data not available.
19:53:34:368 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:368 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:368 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:368 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:389 -> [UART, PM25] Reading data...
19:53:34:389 -> [UART, PM25] Data not available.
19:53:34:389 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:389 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:389 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:389 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:410 -> [UART, PM25] Reading data...
19:53:34:410 -> [UART, PM25] Data not available.
19:53:34:410 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:410 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:410 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:410 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:431 -> [UART, PM25] Reading data...
19:53:34:431 -> [UART, PM25] Data not available.
19:53:34:431 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:431 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:431 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:431 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:452 -> [UART, PM25] Reading data...
19:53:34:452 -> [UART, PM25] Data not available.
19:53:34:452 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:452 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:452 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:452 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:473 -> [UART, PM25] Reading data...
19:53:34:473 -> [UART, PM25] Data not available.
19:53:34:473 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:473 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:473 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:473 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:494 -> [UART, PM25] Reading data...
19:53:34:494 -> [UART, PM25] Data not available.
19:53:34:494 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:494 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:494 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:494 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:515 -> [UART, PM25] Reading data...
19:53:34:517 -> [UART, PM25] Data not available.
19:53:34:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:517 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:517 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:536 -> [UART, PM25] Reading data...
19:53:34:536 -> [UART, PM25] Data not available.
19:53:34:536 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:536 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:536 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:536 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:557 -> [UART, PM25] Reading data...
19:53:34:557 -> [UART, PM25] Data not available.
19:53:34:557 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:557 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:557 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:557 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:578 -> [UART, PM25] Reading data...
19:53:34:578 -> [UART, PM25] Data not available.
19:53:34:578 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:578 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:578 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:578 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:599 -> [UART, PM25] Reading data...
19:53:34:599 -> [UART, PM25] Data not available.
19:53:34:599 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:599 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:599 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:599 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:620 -> [UART, PM25] Reading data...
19:53:34:621 -> [UART, PM25] Data not available.
19:53:34:621 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:621 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:621 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:621 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:641 -> [UART, PM25] Reading data...
19:53:34:641 -> [UART, PM25] Data not available.
19:53:34:641 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:641 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:641 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:641 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:662 -> [UART, PM25] Reading data...
19:53:34:662 -> [UART, PM25] Data not available.
19:53:34:662 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:662 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:662 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:662 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:687 -> [UART, PM25] Reading data...
19:53:34:715 -> [UART, PM25] Data not available.
19:53:34:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:715 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:715 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:715 -> [UART, PM25] Reading data...
19:53:34:715 -> [UART, PM25] Data not available.
19:53:34:715 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:715 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:715 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:715 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:725 -> [UART, PM25] Reading data...
19:53:34:725 -> [UART, PM25] Data not available.
19:53:34:725 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:725 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:725 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:725 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:746 -> [UART, PM25] Reading data...
19:53:34:746 -> [UART, PM25] Data not available.
19:53:34:746 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:746 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:746 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:746 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:779 -> [UART, PM25] Reading data...
19:53:34:779 -> [UART, PM25] Data not available.
19:53:34:779 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:779 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:779 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:779 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:788 -> [UART, PM25] Reading data...
19:53:34:788 -> [UART, PM25] Data not available.
19:53:34:788 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:788 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:788 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:788 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:809 -> [UART, PM25] Reading data...
19:53:34:809 -> [UART, PM25] Data not available.
19:53:34:809 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:809 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:809 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:809 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:830 -> [UART, PM25] Reading data...
19:53:34:830 -> [UART, PM25] Data not available.
19:53:34:830 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:830 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:830 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:830 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:851 -> [UART, PM25] Reading data...
19:53:34:851 -> [UART, PM25] Data not available.
19:53:34:851 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:851 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:851 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:851 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:872 -> [UART, PM25] Reading data...
19:53:34:872 -> [UART, PM25] Data not available.
19:53:34:872 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:872 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:872 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:872 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:893 -> [UART, PM25] Reading data...
19:53:34:893 -> [UART, PM25] Data not available.
19:53:34:893 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:893 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:893 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:893 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:914 -> [UART, PM25] Reading data...
19:53:34:914 -> [UART, PM25] Data not available.
19:53:34:914 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:914 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:914 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:914 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:935 -> [UART, PM25] Reading data...
19:53:34:935 -> [UART, PM25] Data not available.
19:53:34:935 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:935 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:935 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:935 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:956 -> [UART, PM25] Reading data...
19:53:34:956 -> [UART, PM25] Data not available.
19:53:34:956 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:956 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:956 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:956 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:976 -> [UART, PM25] Reading data...
19:53:34:977 -> [UART, PM25] Data not available.
19:53:34:977 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:977 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:977 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:977 -> [UART, PM25] Uart available, resetting event queue..
19:53:34:998 -> [UART, PM25] Reading data...
19:53:34:998 -> [UART, PM25] Data not available.
19:53:34:998 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:34:998 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:34:998 -> [UART, PM25] Uart available, clearing write errors..
19:53:34:998 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:019 -> [UART, PM25] Reading data...
19:53:35:019 -> [UART, PM25] Data not available.
19:53:35:019 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:019 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:019 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:019 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:040 -> [UART, PM25] Reading data...
19:53:35:040 -> [UART, PM25] Data not available.
19:53:35:040 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:040 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:040 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:040 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:061 -> [UART, PM25] Reading data...
19:53:35:061 -> [UART, PM25] Data not available.
19:53:35:061 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:061 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:061 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:061 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:082 -> [UART, PM25] Reading data...
19:53:35:082 -> [UART, PM25] Data not available.
19:53:35:082 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:082 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:082 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:082 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:103 -> [UART, PM25] Reading data...
19:53:35:103 -> [UART, PM25] Data not available.
19:53:35:103 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:103 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:103 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:103 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:124 -> [UART, PM25] Reading data...
19:53:35:124 -> [UART, PM25] Data not available.
19:53:35:124 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:124 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:124 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:124 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:145 -> [UART, PM25] Reading data...
19:53:35:145 -> [UART, PM25] Data not available.
19:53:35:145 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:145 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:145 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:145 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:166 -> [UART, PM25] Reading data...
19:53:35:166 -> [UART, PM25] Data not available.
19:53:35:166 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:166 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:166 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:166 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:187 -> [UART, PM25] Reading data...
19:53:35:187 -> [UART, PM25] Data not available.
19:53:35:187 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:187 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:187 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:187 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:208 -> [UART, PM25] Reading data...
19:53:35:208 -> [UART, PM25] Data not available.
19:53:35:208 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:208 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:208 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:208 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:229 -> [UART, PM25] Reading data...
19:53:35:229 -> [UART, PM25] Data not available.
19:53:35:229 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:229 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:229 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:229 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:250 -> [UART, PM25] Reading data...
19:53:35:250 -> [UART, PM25] Data not available.
19:53:35:250 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:250 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:250 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:250 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:271 -> [UART, PM25] Reading data...
19:53:35:271 -> [UART, PM25] Data not available.
19:53:35:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:271 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:271 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:298 -> [UART, PM25] Reading data...
19:53:35:313 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:313 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:313 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:313 -> [UART, PM25] Uart available, resetting event queue..

19:53:35:299 -> [UART, PM25] Data not available.
19:53:35:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:299 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:299 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:313 -> [UART, PM25] Reading data...
19:53:35:313 -> [UART, PM25] Data not available.19:53:35:334 -> [UART, PM25] Reading data...
19:53:35:334 -> [UART, PM25] Data not available.
19:53:35:334 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:334 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:334 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:334 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:355 -> [UART, PM25] Reading data...
19:53:35:355 -> [UART, PM25] Data not available.
19:53:35:355 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:355 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:355 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:355 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:376 -> [UART, PM25] Reading data...
19:53:35:376 -> [UART, PM25] Data not available.
19:53:35:376 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:376 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:376 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:376 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:397 -> [UART, PM25] Reading data...
19:53:35:397 -> [UART, PM25] Data not available.
19:53:35:397 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:397 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:397 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:397 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:418 -> [UART, PM25] Reading data...
19:53:35:418 -> [UART, PM25] Data not available.
19:53:35:418 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:418 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:418 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:418 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:438 -> [UART, PM25] Reading data...
19:53:35:439 -> [UART, PM25] Data not available.
19:53:35:439 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:439 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:439 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:439 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:460 -> [UART, PM25] Reading data...
19:53:35:460 -> [UART, PM25] Data not available.
19:53:35:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:460 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:460 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:481 -> [UART, PM25] Reading data...
19:53:35:481 -> [UART, PM25] Data not available.
19:53:35:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:481 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:481 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:502 -> [UART, PM25] Reading data...
19:53:35:502 -> [UART, PM25] Data not available.
19:53:35:502 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:502 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:502 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:502 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:523 -> [UART, PM25] Reading data...
19:53:35:523 -> [UART, PM25] Data not available.
19:53:35:523 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:523 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:523 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:523 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:544 -> [UART, PM25] Reading data...
19:53:35:544 -> [UART, PM25] Data not available.
19:53:35:544 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:544 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:544 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:544 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:565 -> [UART, PM25] Reading data...
19:53:35:565 -> [UART, PM25] Data not available.
19:53:35:565 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:565 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:565 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:565 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:586 -> [UART, PM25] Reading data...
19:53:35:586 -> [UART, PM25] Data not available.
19:53:35:586 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:586 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:586 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:586 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:607 -> [UART, PM25] Reading data...
19:53:35:607 -> [UART, PM25] Data not available.
19:53:35:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:607 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:607 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:628 -> [UART, PM25] Reading data...
19:53:35:628 -> [UART, PM25] Data not available.
19:53:35:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:628 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:628 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:649 -> [UART, PM25] Reading data...
19:53:35:649 -> [UART, PM25] Data not available.
19:53:35:649 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:649 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:649 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:649 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:670 -> [UART, PM25] Reading data...
19:53:35:670 -> [UART, PM25] Data not available.
19:53:35:670 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:670 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:670 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:670 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:690 -> [UART, PM25] Reading data...
19:53:35:691 -> [UART, PM25] Data not available.
19:53:35:691 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:691 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:691 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:691 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:714 -> [UART, PM25] Reading data...
19:53:35:714 -> [UART, PM25] Data not available.
19:53:35:714 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:714 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:714 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:714 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:733 -> [UART, PM25] Reading data...
19:53:35:733 -> [UART, PM25] Data not available.
19:53:35:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:733 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:733 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:733 -> PING!
19:53:35:947 -> [UART, PM25] Reading data...
19:53:35:947 -> [UART, PM25] Data not available.
19:53:35:947 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:947 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:947 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:947 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:968 -> [UART, PM25] Reading data...
19:53:35:972 -> [UART, PM25] Data not available.
19:53:35:972 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:972 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:972 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:972 -> [UART, PM25] Uart available, resetting event queue..
19:53:35:989 -> [UART, PM25] Reading data...
19:53:35:989 -> [UART, PM25] Data not available.
19:53:35:989 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:35:989 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:35:989 -> [UART, PM25] Uart available, clearing write errors..
19:53:35:989 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:010 -> [UART, PM25] Reading data...
19:53:36:010 -> [UART, PM25] Data not available.
19:53:36:010 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:010 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:010 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:010 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:031 -> [UART, PM25] Reading data...
19:53:36:031 -> [UART, PM25] Data not available.
19:53:36:031 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:031 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:031 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:031 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:052 -> [UART, PM25] Reading data...
19:53:36:052 -> [UART, PM25] Data not available.
19:53:36:052 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:052 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:052 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:052 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:073 -> [UART, PM25] Reading data...
19:53:36:073 -> [UART, PM25] Data not available.
19:53:36:073 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:073 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:073 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:073 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:094 -> [UART, PM25] Reading data...
19:53:36:094 -> [UART, PM25] Data not available.
19:53:36:094 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:094 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:094 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:094 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:115 -> [UART, PM25] Reading data...
19:53:36:115 -> [UART, PM25] Data not available.
19:53:36:115 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:115 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:115 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:115 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:136 -> [UART, PM25] Reading data...
19:53:36:136 -> [UART, PM25] Data not available.
19:53:36:136 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:136 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:136 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:136 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:157 -> [UART, PM25] Reading data...
19:53:36:157 -> [UART, PM25] Data not available.
19:53:36:157 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:157 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:157 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:157 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:178 -> [UART, PM25] Reading data...
19:53:36:178 -> [UART, PM25] Data not available.
19:53:36:178 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:178 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:178 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:178 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:198 -> [UART, PM25] Reading data...
19:53:36:199 -> [UART, PM25] Data not available.
19:53:36:199 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:199 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:199 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:199 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:219 -> [UART, PM25] Reading data...
19:53:36:220 -> [UART, PM25] Data not available.
19:53:36:220 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:220 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:220 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:220 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:241 -> [UART, PM25] Reading data...
19:53:36:241 -> [UART, PM25] Data not available.
19:53:36:241 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:241 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:241 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:241 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:262 -> [UART, PM25] Reading data...
19:53:36:262 -> [UART, PM25] Data not available.
19:53:36:262 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:262 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:262 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:262 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:283 -> [UART, PM25] Reading data...
19:53:36:283 -> [UART, PM25] Data not available.
19:53:36:283 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:283 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:283 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:283 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:304 -> [UART, PM25] Reading data...
19:53:36:304 -> [UART, PM25] Data not available.
19:53:36:304 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:304 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:304 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:304 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:342 -> [UART, PM25] Reading data...
19:53:36:343 -> [UART, PM25] Data not available.
19:53:36:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:343 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:343 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:346 -> [UART, PM25] Reading data...
19:53:36:346 -> [UART, PM25] Data not available.
19:53:36:346 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:346 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:346 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:346 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:367 -> [UART, PM25] Reading data...
19:53:36:367 -> [UART, PM25] Data not available.
19:53:36:367 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:367 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:367 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:367 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:388 -> [UART, PM25] Reading data...
19:53:36:388 -> [UART, PM25] Data not available.
19:53:36:388 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:388 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:388 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:388 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:408 -> [UART, PM25] Reading data...
19:53:36:409 -> [UART, PM25] Data not available.
19:53:36:409 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:409 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:409 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:409 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:430 -> [UART, PM25] Reading data...
19:53:36:430 -> [UART, PM25] Data not available.
19:53:36:430 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:430 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:430 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:430 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:451 -> [UART, PM25] Reading data...
19:53:36:451 -> [UART, PM25] Data not available.
19:53:36:451 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:451 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:451 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:451 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:472 -> [UART, PM25] Reading data...
19:53:36:472 -> [UART, PM25] Data not available.
19:53:36:472 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:472 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:472 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:472 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:492 -> [UART, PM25] Reading data...
19:53:36:493 -> [UART, PM25] Data not available.
19:53:36:493 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:493 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:493 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:493 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:514 -> [UART, PM25] Reading data...
19:53:36:515 -> [UART, PM25] Data not available.
19:53:36:515 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:515 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:515 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:515 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:535 -> [UART, PM25] Reading data...
19:53:36:535 -> [UART, PM25] Data not available.
19:53:36:535 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:535 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:535 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:535 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:556 -> [UART, PM25] Reading data...
19:53:36:556 -> [UART, PM25] Data not available.
19:53:36:556 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:556 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:556 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:556 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:577 -> [UART, PM25] Reading data...
19:53:36:577 -> [UART, PM25] Data not available.
19:53:36:577 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:577 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:577 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:577 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:598 -> [UART, PM25] Reading data...
19:53:36:598 -> [UART, PM25] Data not available.
19:53:36:598 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:598 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:598 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:598 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:619 -> [UART, PM25] Reading data...
19:53:36:619 -> [UART, PM25] Data not available.
19:53:36:619 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:619 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:619 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:619 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:640 -> [UART, PM25] Reading data...
19:53:36:640 -> [UART, PM25] Data not available.
19:53:36:640 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:640 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:640 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:640 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:661 -> [UART, PM25] Reading data...
19:53:36:661 -> [UART, PM25] Data not available.
19:53:36:661 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:661 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:661 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:661 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:708 -> [UART, PM25] Reading data...
19:53:36:721 -> [UART, PM25] Data not available.
19:53:36:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:721 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:721 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:721 -> [UART, PM25] Reading data...
19:53:36:721 -> [UART, PM25] Data not available.
19:53:36:721 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:721 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:721 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:721 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:723 -> [UART, PM25] Reading data...
19:53:36:723 -> [UART, PM25] Data not available.
19:53:36:724 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:724 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:724 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:724 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:745 -> [UART, PM25] Reading data...
19:53:36:745 -> [UART, PM25] Data not available.
19:53:36:745 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:745 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:745 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:745 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:766 -> [UART, PM25] Reading data...
19:53:36:766 -> [UART, PM25] Data not available.
19:53:36:766 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:766 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:766 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:766 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:787 -> [UART, PM25] Reading data...
19:53:36:787 -> [UART, PM25] Data not available.
19:53:36:787 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:787 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:787 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:787 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:808 -> [UART, PM25] Reading data...
19:53:36:808 -> [UART, PM25] Data not available.
19:53:36:808 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:808 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:808 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:808 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:829 -> [UART, PM25] Reading data...
19:53:36:829 -> [UART, PM25] Data not available.
19:53:36:829 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:829 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:829 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:829 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:859 -> [UART, PM25] Reading data...
19:53:36:860 -> [UART, PM25] Data not available.
19:53:36:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:860 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:860 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:871 -> [UART, PM25] Reading data...
19:53:36:871 -> [UART, PM25] Data not available.
19:53:36:871 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:871 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:871 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:871 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:892 -> [UART, PM25] Reading data...
19:53:36:892 -> [UART, PM25] Data not available.
19:53:36:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:892 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:892 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:912 -> [UART, PM25] Reading data...
19:53:36:913 -> [UART, PM25] Data not available.
19:53:36:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:913 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:913 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:934 -> [UART, PM25] Reading data...
19:53:36:934 -> [UART, PM25] Data not available.
19:53:36:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:934 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:934 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:955 -> [UART, PM25] Reading data...
19:53:36:955 -> [UART, PM25] Data not available.
19:53:36:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:955 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:955 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:976 -> [UART, PM25] Reading data...
19:53:36:976 -> [UART, PM25] Data not available.
19:53:36:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:976 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:976 -> [UART, PM25] Uart available, resetting event queue..
19:53:36:997 -> [UART, PM25] Reading data...
19:53:36:997 -> [UART, PM25] Data not available.
19:53:36:997 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:36:997 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:36:997 -> [UART, PM25] Uart available, clearing write errors..
19:53:36:997 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:018 -> [UART, PM25] Reading data...
19:53:37:018 -> [UART, PM25] Data not available.
19:53:37:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:018 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:018 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:039 -> [UART, PM25] Reading data...
19:53:37:039 -> [UART, PM25] Data not available.
19:53:37:039 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:039 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:039 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:039 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:060 -> [UART, PM25] Reading data...
19:53:37:060 -> [UART, PM25] Data not available.
19:53:37:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:060 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:060 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:081 -> [UART, PM25] Reading data...
19:53:37:081 -> [UART, PM25] Data not available.
19:53:37:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:081 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:081 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:102 -> [UART, PM25] Reading data...
19:53:37:102 -> [UART, PM25] Data not available.
19:53:37:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:102 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:102 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:122 -> [UART, PM25] Reading data...
19:53:37:123 -> [UART, PM25] Data not available.
19:53:37:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:123 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:123 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:143 -> [UART, PM25] Reading data...
19:53:37:144 -> [UART, PM25] Data not available.
19:53:37:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:144 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:144 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:165 -> [UART, PM25] Reading data...
19:53:37:165 -> [UART, PM25] Data not available.
19:53:37:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:165 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:165 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:186 -> [UART, PM25] Reading data...
19:53:37:186 -> [UART, PM25] Data not available.
19:53:37:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:186 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:186 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:207 -> [UART, PM25] Reading data...
19:53:37:207 -> [UART, PM25] Data not available.
19:53:37:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:207 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:207 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:228 -> [UART, PM25] Reading data...
19:53:37:228 -> [UART, PM25] Data not available.
19:53:37:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:228 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:228 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:249 -> [UART, PM25] Reading data...
19:53:37:249 -> [UART, PM25] Data not available.
19:53:37:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:249 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:249 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:270 -> [UART, PM25] Reading data...
19:53:37:270 -> [UART, PM25] Data not available.
19:53:37:270 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:270 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:270 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:270 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:291 -> [UART, PM25] Reading data...
19:53:37:291 -> [UART, PM25] Data not available.
19:53:37:291 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:291 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:291 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:291 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:312 -> [UART, PM25] Reading data...
19:53:37:312 -> [UART, PM25] Data not available.
19:53:37:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:312 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:312 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:333 -> [UART, PM25] Reading data...
19:53:37:333 -> [UART, PM25] Data not available.
19:53:37:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:333 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:333 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:354 -> [UART, PM25] Reading data...
19:53:37:354 -> [UART, PM25] Data not available.
19:53:37:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:354 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:354 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:383 -> [UART, PM25] Reading data...
19:53:37:383 -> [UART, PM25] Data not available.
19:53:37:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:384 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:384 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:396 -> [UART, PM25] Reading data...
19:53:37:396 -> [UART, PM25] Data not available.
19:53:37:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:396 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:396 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:417 -> [UART, PM25] Reading data...
19:53:37:417 -> [UART, PM25] Data not available.
19:53:37:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:417 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:417 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:438 -> [UART, PM25] Reading data...
19:53:37:438 -> [UART, PM25] Data not available.
19:53:37:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:438 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:438 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:459 -> [UART, PM25] Reading data...
19:53:37:459 -> [UART, PM25] Data not available.
19:53:37:460 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:460 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:460 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:460 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:480 -> [UART, PM25] Reading data...
19:53:37:481 -> [UART, PM25] Data not available.
19:53:37:481 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:481 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:481 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:481 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:501 -> [UART, PM25] Reading data...
19:53:37:501 -> [UART, PM25] Data not available.
19:53:37:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:501 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:501 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:522 -> [UART, PM25] Reading data...
19:53:37:522 -> [UART, PM25] Data not available.
19:53:37:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:522 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:522 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:543 -> [UART, PM25] Reading data...
19:53:37:543 -> [UART, PM25] Data not available.
19:53:37:543 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:543 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:543 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:543 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:564 -> [UART, PM25] Reading data...
19:53:37:564 -> [UART, PM25] Data not available.
19:53:37:564 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:564 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:564 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:564 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:585 -> [UART, PM25] Reading data...
19:53:37:585 -> [UART, PM25] Data not available.
19:53:37:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:585 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:585 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:606 -> [UART, PM25] Reading data...
19:53:37:606 -> [UART, PM25] Data not available.
19:53:37:606 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:606 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:606 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:606 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:626 -> [UART, PM25] Reading data...
19:53:37:627 -> [UART, PM25] Data not available.
19:53:37:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:627 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:627 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:648 -> [UART, PM25] Reading data...
19:53:37:648 -> [UART, PM25] Data not available.
19:53:37:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:648 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:648 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:669 -> [UART, PM25] Reading data...
19:53:37:669 -> [UART, PM25] Data not available.
19:53:37:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:669 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:669 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:689 -> [UART, PM25] Reading data...
19:53:37:690 -> [UART, PM25] Data not available.
19:53:37:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:690 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:690 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:711 -> [UART, PM25] Reading data...
19:53:37:711 -> [UART, PM25] Data not available.
19:53:37:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:711 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:711 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:732 -> [UART, PM25] Reading data...
19:53:37:732 -> [UART, PM25] Data not available.
19:53:37:732 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:732 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:732 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:732 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:755 -> [UART, PM25] Reading data...
19:53:37:757 -> [UART, PM25] Data not available.
19:53:37:757 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:757 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:757 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:757 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:774 -> [UART, PM25] Reading data...
19:53:37:775 -> [UART, PM25] Data not available.
19:53:37:775 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:775 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:775 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:775 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:794 -> [UART, PM25] Reading data...
19:53:37:795 -> [UART, PM25] Data not available.
19:53:37:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:795 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:795 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:815 -> [UART, PM25] Reading data...
19:53:37:816 -> [UART, PM25] Data not available.
19:53:37:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:816 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:816 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:837 -> [UART, PM25] Reading data...
19:53:37:837 -> [UART, PM25] Data not available.
19:53:37:837 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:837 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:837 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:837 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:858 -> [UART, PM25] Reading data...
19:53:37:858 -> [UART, PM25] Data not available.
19:53:37:858 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:858 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:858 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:858 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:879 -> [UART, PM25] Reading data...
19:53:37:879 -> [UART, PM25] Data not available.
19:53:37:879 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:879 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:879 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:879 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:903 -> [UART, PM25] Reading data...
19:53:37:903 -> [UART, PM25] Data not available.
19:53:37:903 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:903 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:903 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:903 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:921 -> [UART, PM25] Reading data...
19:53:37:921 -> [UART, PM25] Data not available.
19:53:37:921 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:921 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:921 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:921 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:942 -> [UART, PM25] Reading data...
19:53:37:942 -> [UART, PM25] Data not available.
19:53:37:942 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:942 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:942 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:942 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:962 -> [UART, PM25] Reading data...
19:53:37:963 -> [UART, PM25] Data not available.
19:53:37:963 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:963 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:963 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:963 -> [UART, PM25] Uart available, resetting event queue..
19:53:37:984 -> [UART, PM25] Reading data...
19:53:37:984 -> [UART, PM25] Data not available.
19:53:37:984 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:37:984 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:37:984 -> [UART, PM25] Uart available, clearing write errors..
19:53:37:984 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:005 -> [UART, PM25] Reading data...
19:53:38:005 -> [UART, PM25] Data not available.
19:53:38:005 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:005 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:005 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:005 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:026 -> [UART, PM25] Reading data...
19:53:38:026 -> [UART, PM25] Data not available.
19:53:38:026 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:026 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:026 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:026 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:047 -> [UART, PM25] Reading data...
19:53:38:047 -> [UART, PM25] Data not available.
19:53:38:047 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:047 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:047 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:047 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:068 -> [UART, PM25] Reading data...
19:53:38:068 -> [UART, PM25] Data not available.
19:53:38:068 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:068 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:068 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:068 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:089 -> [UART, PM25] Reading data...
19:53:38:089 -> [UART, PM25] Data not available.
19:53:38:089 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:089 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:089 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:089 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:110 -> [UART, PM25] Reading data...
19:53:38:110 -> [UART, PM25] Data not available.
19:53:38:110 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:110 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:110 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:110 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:131 -> [UART, PM25] Reading data...
19:53:38:131 -> [UART, PM25] Data not available.
19:53:38:131 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:131 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:131 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:131 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:152 -> [UART, PM25] Reading data...
19:53:38:152 -> [UART, PM25] Data not available.
19:53:38:152 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:152 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:152 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:152 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:173 -> [UART, PM25] Reading data...
19:53:38:173 -> [UART, PM25] Data not available.
19:53:38:173 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:173 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:173 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:173 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:194 -> [UART, PM25] Reading data...
19:53:38:194 -> [UART, PM25] Data not available.
19:53:38:194 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:194 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:194 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:194 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:215 -> [UART, PM25] Reading data...
19:53:38:215 -> [UART, PM25] Data not available.
19:53:38:215 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:215 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:215 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:215 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:236 -> [UART, PM25] Reading data...
19:53:38:236 -> [UART, PM25] Data not available.
19:53:38:236 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:236 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:236 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:236 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:257 -> [UART, PM25] Reading data...
19:53:38:257 -> [UART, PM25] Data not available.
19:53:38:257 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:257 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:257 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:257 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:278 -> [UART, PM25] Reading data...
19:53:38:278 -> [UART, PM25] Data not available.
19:53:38:278 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:278 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:278 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:278 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:299 -> [UART, PM25] Reading data...
19:53:38:299 -> [UART, PM25] Data not available.
19:53:38:299 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:299 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:299 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:299 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:320 -> [UART, PM25] Reading data...
19:53:38:320 -> [UART, PM25] Data not available.
19:53:38:320 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:320 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:320 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:320 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:340 -> [UART, PM25] Reading data...
19:53:38:341 -> [UART, PM25] Data not available.
19:53:38:341 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:341 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:341 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:341 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:362 -> [UART, PM25] Reading data...
19:53:38:362 -> [UART, PM25] Data not available.
19:53:38:363 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:363 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:363 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:363 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:383 -> [UART, PM25] Reading data...
19:53:38:384 -> [UART, PM25] Data not available.
19:53:38:384 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:384 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:384 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:384 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:416 -> [UART, PM25] Reading data...
19:53:38:417 -> [UART, PM25] Data not available.
19:53:38:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:417 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:417 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:425 -> [UART, PM25] Reading data...
19:53:38:425 -> [UART, PM25] Data not available.
19:53:38:425 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:425 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:425 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:425 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:446 -> [UART, PM25] Reading data...
19:53:38:446 -> [UART, PM25] Data not available.
19:53:38:446 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:446 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:446 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:446 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:467 -> [UART, PM25] Reading data...
19:53:38:467 -> [UART, PM25] Data not available.
19:53:38:467 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:467 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:467 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:467 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:488 -> [UART, PM25] Reading data...
19:53:38:488 -> [UART, PM25] Data not available.
19:53:38:488 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:488 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:488 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:488 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:518 -> [UART, PM25] Reading data...
19:53:38:546 -> [UART, PM25] Data not available.
19:53:38:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:546 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:546 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:546 -> [UART, PM25] Reading data...
19:53:38:546 -> [UART, PM25] Data not available.
19:53:38:546 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:546 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:546 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:546 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:553 -> [UART, PM25] Reading data...
19:53:38:553 -> [UART, PM25] Data not available.
19:53:38:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:553 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:553 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:572 -> [UART, PM25] Reading data...
19:53:38:572 -> [UART, PM25] Data not available.
19:53:38:572 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:572 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:572 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:572 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:593 -> [UART, PM25] Reading data...
19:53:38:593 -> [UART, PM25] Data not available.
19:53:38:593 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:593 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:593 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:593 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:613 -> [UART, PM25] Reading data...
19:53:38:614 -> [UART, PM25] Data not available.
19:53:38:614 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:614 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:614 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:614 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:634 -> [UART, PM25] Reading data...
19:53:38:635 -> [UART, PM25] Data not available.
19:53:38:635 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:635 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:635 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:635 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:655 -> [UART, PM25] Reading data...
19:53:38:656 -> [UART, PM25] Data not available.
19:53:38:656 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:656 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:656 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:656 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:676 -> [UART, PM25] Reading data...
19:53:38:676 -> [UART, PM25] Data not available.
19:53:38:677 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:677 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:677 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:677 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:698 -> [UART, PM25] Reading data...
19:53:38:698 -> [UART, PM25] Data not available.
19:53:38:698 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:698 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:698 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:698 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:719 -> [UART, PM25] Reading data...
19:53:38:719 -> [UART, PM25] Data not available.
19:53:38:719 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:719 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:719 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:719 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:740 -> [UART, PM25] Reading data...
19:53:38:740 -> [UART, PM25] Data not available.
19:53:38:740 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:740 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:740 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:740 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:760 -> [UART, PM25] Reading data...
19:53:38:761 -> [UART, PM25] Data not available.
19:53:38:761 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:761 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:761 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:761 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:782 -> [UART, PM25] Reading data...
19:53:38:782 -> [UART, PM25] Data not available.
19:53:38:782 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:782 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:782 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:782 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:803 -> [UART, PM25] Reading data...
19:53:38:803 -> [UART, PM25] Data not available.
19:53:38:803 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:803 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:803 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:803 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:823 -> [UART, PM25] Reading data...
19:53:38:824 -> [UART, PM25] Data not available.
19:53:38:824 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:824 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:824 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:824 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:845 -> [UART, PM25] Reading data...
19:53:38:845 -> [UART, PM25] Data not available.
19:53:38:845 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:845 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:845 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:845 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:866 -> [UART, PM25] Reading data...
19:53:38:866 -> [UART, PM25] Data not available.
19:53:38:866 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:866 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:866 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:866 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:887 -> [UART, PM25] Reading data...
19:53:38:887 -> [UART, PM25] Data not available.
19:53:38:887 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:887 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:887 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:887 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:908 -> [UART, PM25] Reading data...
19:53:38:908 -> [UART, PM25] Data not available.
19:53:38:908 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:908 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:908 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:908 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:937 -> [UART, PM25] Reading data...
19:53:38:938 -> [UART, PM25] Data not available.
19:53:38:938 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:938 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:938 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:938 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:953 -> [UART, PM25] Reading data...
19:53:38:953 -> [UART, PM25] Data not available.
19:53:38:953 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:953 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:953 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:953 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:971 -> [UART, PM25] Reading data...
19:53:38:971 -> [UART, PM25] Data not available.
19:53:38:971 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:971 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:971 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:971 -> [UART, PM25] Uart available, resetting event queue..
19:53:38:992 -> [UART, PM25] Reading data...
19:53:38:992 -> [UART, PM25] Data not available.
19:53:38:992 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:38:992 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:38:992 -> [UART, PM25] Uart available, clearing write errors..
19:53:38:992 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:013 -> [UART, PM25] Reading data...
19:53:39:013 -> [UART, PM25] Data not available.
19:53:39:013 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:013 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:013 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:013 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:034 -> [UART, PM25] Reading data...
19:53:39:034 -> [UART, PM25] Data not available.
19:53:39:034 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:034 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:034 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:034 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:054 -> [UART, PM25] Reading data...
19:53:39:055 -> [UART, PM25] Data not available.
19:53:39:055 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:055 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:055 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:055 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:076 -> [UART, PM25] Reading data...
19:53:39:076 -> [UART, PM25] Data not available.
19:53:39:076 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:076 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:076 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:076 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:097 -> [UART, PM25] Reading data...
19:53:39:098 -> [UART, PM25] Data not available.
19:53:39:098 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:098 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:098 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:098 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:118 -> [UART, PM25] Reading data...
19:53:39:118 -> [UART, PM25] Data not available.
19:53:39:118 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:118 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:118 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:118 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:139 -> [UART, PM25] Reading data...
19:53:39:139 -> [UART, PM25] Data not available.
19:53:39:139 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:139 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:139 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:139 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:160 -> [UART, PM25] Reading data...
19:53:39:160 -> [UART, PM25] Data not available.
19:53:39:160 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:160 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:160 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:160 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:181 -> [UART, PM25] Reading data...
19:53:39:181 -> [UART, PM25] Data not available.
19:53:39:181 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:181 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:181 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:181 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:202 -> [UART, PM25] Reading data...
19:53:39:202 -> [UART, PM25] Data not available.
19:53:39:202 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:202 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:202 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:202 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:222 -> [UART, PM25] Reading data...
19:53:39:223 -> [UART, PM25] Data not available.
19:53:39:223 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:223 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:223 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:223 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:244 -> [UART, PM25] Reading data...
19:53:39:244 -> [UART, PM25] Data not available.
19:53:39:244 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:244 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:244 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:244 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:265 -> [UART, PM25] Reading data...
19:53:39:265 -> [UART, PM25] Data not available.
19:53:39:265 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:265 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:265 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:265 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:286 -> [UART, PM25] Reading data...
19:53:39:286 -> [UART, PM25] Data not available.
19:53:39:286 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:286 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:286 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:286 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:307 -> [UART, PM25] Reading data...
19:53:39:307 -> [UART, PM25] Data not available.
19:53:39:307 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:307 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:307 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:307 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:328 -> [UART, PM25] Reading data...
19:53:39:328 -> [UART, PM25] Data not available.
19:53:39:328 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:328 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:328 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:328 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:349 -> [UART, PM25] Reading data...
19:53:39:349 -> [UART, PM25] Data not available.
19:53:39:349 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:349 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:349 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:349 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:369 -> [UART, PM25] Reading data...
19:53:39:369 -> [UART, PM25] Data not available.
19:53:39:370 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:370 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:370 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:370 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:391 -> [UART, PM25] Reading data...
19:53:39:391 -> [UART, PM25] Data not available.
19:53:39:391 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:391 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:391 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:391 -> [UART, PM25] Uart available, resetting event queue..

19:53:39:412 -> [UART, PM25] Data not available.
19:53:39:412 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:412 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:412 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:412 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:433 -> [UART, PM25] Reading data...
19:53:39:433 -> [UART, PM25] Data not available.
19:53:39:433 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:433 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:433 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:433 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:460 -> [UART, PM25] Reading data...
19:53:39:460 -> [UART, PM25] Data not available.
19:53:39:461 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:461 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:461 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:461 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:475 -> [UART, PM25] Reading data...
19:53:39:475 -> [UART, PM25] Data not available.
19:53:39:475 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:475 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:475 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:475 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:412 -> [UART, PM25] Reading data...19:53:39:496 -> [UART, PM25] Reading data...
19:53:39:496 -> [UART, PM25] Data not available.
19:53:39:496 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:496 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:496 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:496 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:517 -> [UART, PM25] Reading data...
19:53:39:517 -> [UART, PM25] Data not available.
19:53:39:517 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:517 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:517 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:517 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:538 -> [UART, PM25] Reading data...
19:53:39:538 -> [UART, PM25] Data not available.
19:53:39:538 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:538 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:538 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:538 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:559 -> [UART, PM25] Reading data...
19:53:39:559 -> [UART, PM25] Data not available.
19:53:39:559 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:559 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:559 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:559 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:580 -> [UART, PM25] Reading data...
19:53:39:580 -> [UART, PM25] Data not available.
19:53:39:580 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:580 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:580 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:580 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:601 -> [UART, PM25] Reading data...
19:53:39:601 -> [UART, PM25] Data not available.
19:53:39:601 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:601 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:601 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:601 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:622 -> [UART, PM25] Reading data...
19:53:39:622 -> [UART, PM25] Data not available.
19:53:39:622 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:622 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:622 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:622 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:642 -> [UART, PM25] Reading data...
19:53:39:642 -> [UART, PM25] Data not available.
19:53:39:643 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:643 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:643 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:643 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:664 -> [UART, PM25] Reading data...
19:53:39:665 -> [UART, PM25] Data not available.
19:53:39:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:665 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:665 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:684 -> [UART, PM25] Reading data...
19:53:39:685 -> [UART, PM25] Data not available.
19:53:39:685 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:685 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:685 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:685 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:706 -> [UART, PM25] Reading data...
19:53:39:706 -> [UART, PM25] Data not available.
19:53:39:706 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:706 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:706 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:706 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:727 -> [UART, PM25] Reading data...
19:53:39:727 -> [UART, PM25] Data not available.
19:53:39:727 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:727 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:727 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:727 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:748 -> [UART, PM25] Reading data...
19:53:39:748 -> [UART, PM25] Data not available.
19:53:39:748 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:748 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:748 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:748 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:768 -> [UART, PM25] Reading data...
19:53:39:769 -> [UART, PM25] Data not available.
19:53:39:769 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:769 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:769 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:769 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:790 -> [UART, PM25] Reading data...
19:53:39:790 -> [UART, PM25] Data not available.
19:53:39:790 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:790 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:790 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:790 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:811 -> [UART, PM25] Reading data...
19:53:39:811 -> [UART, PM25] Data not available.
19:53:39:811 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:811 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:811 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:811 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:832 -> [UART, PM25] Reading data...
19:53:39:832 -> [UART, PM25] Data not available.
19:53:39:832 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:832 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:832 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:832 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:853 -> [UART, PM25] Reading data...
19:53:39:853 -> [UART, PM25] Data not available.
19:53:39:853 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:853 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:853 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:853 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:874 -> [UART, PM25] Reading data...
19:53:39:874 -> [UART, PM25] Data not available.
19:53:39:874 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:874 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:874 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:874 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:895 -> [UART, PM25] Reading data...
19:53:39:895 -> [UART, PM25] Data not available.
19:53:39:895 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:895 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:895 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:895 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:916 -> [UART, PM25] Reading data...
19:53:39:916 -> [UART, PM25] Data not available.
19:53:39:916 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:916 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:916 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:916 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:937 -> [UART, PM25] Reading data...
19:53:39:939 -> [UART, PM25] Data not available.
19:53:39:939 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:939 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:939 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:939 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:958 -> [UART, PM25] Reading data...
19:53:39:958 -> [UART, PM25] Data not available.
19:53:39:958 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:958 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:958 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:958 -> [UART, PM25] Uart available, resetting event queue..
19:53:39:980 -> [UART, PM25] Reading data...
19:53:39:980 -> [UART, PM25] Data not available.
19:53:39:980 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:39:980 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:39:980 -> [UART, PM25] Uart available, clearing write errors..
19:53:39:980 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:000 -> [UART, PM25] Reading data...
19:53:40:000 -> [UART, PM25] Data not available.
19:53:40:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:000 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:000 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:021 -> [UART, PM25] Reading data...
19:53:40:021 -> [UART, PM25] Data not available.
19:53:40:021 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:021 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:021 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:021 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:041 -> [UART, PM25] Reading data...
19:53:40:042 -> [UART, PM25] Data not available.
19:53:40:042 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:042 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:042 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:042 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:062 -> [UART, PM25] Reading data...
19:53:40:063 -> [UART, PM25] Data not available.
19:53:40:063 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:063 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:063 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:063 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:084 -> [UART, PM25] Reading data...
19:53:40:084 -> [UART, PM25] Data not available.
19:53:40:084 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:084 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:084 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:084 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:104 -> [UART, PM25] Reading data...
19:53:40:105 -> [UART, PM25] Data not available.
19:53:40:105 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:105 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:105 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:105 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:126 -> [UART, PM25] Reading data...
19:53:40:126 -> [UART, PM25] Data not available.
19:53:40:126 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:126 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:126 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:126 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:147 -> [UART, PM25] Reading data...
19:53:40:147 -> [UART, PM25] Data not available.
19:53:40:147 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:147 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:147 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:147 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:168 -> [UART, PM25] Reading data...
19:53:40:168 -> [UART, PM25] Data not available.
19:53:40:168 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:168 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:168 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:168 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:189 -> [UART, PM25] Reading data...
19:53:40:189 -> [UART, PM25] Data not available.
19:53:40:189 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:189 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:189 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:189 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:210 -> [UART, PM25] Reading data...
19:53:40:210 -> [UART, PM25] Data not available.
19:53:40:210 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:210 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:210 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:210 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:231 -> [UART, PM25] Reading data...
19:53:40:231 -> [UART, PM25] Data not available.
19:53:40:231 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:231 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:231 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:231 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:252 -> [UART, PM25] Reading data...
19:53:40:252 -> [UART, PM25] Data not available.
19:53:40:252 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:252 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:252 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:252 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:272 -> [UART, PM25] Reading data...
19:53:40:272 -> [UART, PM25] Data not available.
19:53:40:273 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:273 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:273 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:273 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:294 -> [UART, PM25] Reading data...
19:53:40:294 -> [UART, PM25] Data not available.
19:53:40:294 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:294 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:294 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:294 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:315 -> [UART, PM25] Reading data...
19:53:40:315 -> [UART, PM25] Data not available.
19:53:40:315 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:315 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:315 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:315 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:337 -> [UART, PM25] Reading data...
19:53:40:337 -> [UART, PM25] Data not available.
19:53:40:337 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:337 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:337 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:337 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:357 -> [UART, PM25] Reading data...
19:53:40:357 -> [UART, PM25] Data not available.
19:53:40:357 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:357 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:357 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:357 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:378 -> [UART, PM25] Reading data...
19:53:40:378 -> [UART, PM25] Data not available.
19:53:40:378 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:378 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:378 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:378 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:421 -> [UART, PM25] Reading data...
19:53:40:435 -> [UART, PM25] Data not available.
19:53:40:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:435 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:435 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:435 -> [UART, PM25] Reading data...
19:53:40:435 -> [UART, PM25] Data not available.
19:53:40:435 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:435 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:435 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:435 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:441 -> [UART, PM25] Reading data...
19:53:40:441 -> [UART, PM25] Data not available.
19:53:40:441 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:441 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:441 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:441 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:441 -> PING!
19:53:40:665 -> [UART, PM25] Reading data...
19:53:40:665 -> [UART, PM25] Data not available.
19:53:40:665 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:665 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:665 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:665 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:686 -> [UART, PM25] Reading data...
19:53:40:686 -> [UART, PM25] Data not available.
19:53:40:686 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:686 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:686 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:686 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:706 -> [UART, PM25] Reading data...
19:53:40:707 -> [UART, PM25] Data not available.
19:53:40:707 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:707 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:707 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:707 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:727 -> [UART, PM25] Reading data...
19:53:40:728 -> [UART, PM25] Data not available.
19:53:40:728 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:728 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:728 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:728 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:749 -> [UART, PM25] Reading data...
19:53:40:749 -> [UART, PM25] Data not available.
19:53:40:749 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:749 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:749 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:749 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:769 -> [UART, PM25] Reading data...
19:53:40:770 -> [UART, PM25] Data not available.
19:53:40:770 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:770 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:770 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:770 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:790 -> [UART, PM25] Reading data...
19:53:40:791 -> [UART, PM25] Data not available.
19:53:40:791 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:791 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:791 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:791 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:811 -> [UART, PM25] Reading data...
19:53:40:812 -> [UART, PM25] Data not available.
19:53:40:812 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:812 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:812 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:812 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:833 -> [UART, PM25] Reading data...
19:53:40:833 -> [UART, PM25] Data not available.
19:53:40:833 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:833 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:833 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:833 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:854 -> [UART, PM25] Reading data...
19:53:40:854 -> [UART, PM25] Data not available.
19:53:40:854 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:854 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:854 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:854 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:874 -> [UART, PM25] Reading data...
19:53:40:874 -> [UART, PM25] Data not available.
19:53:40:875 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:40:875 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:40:875 -> [UART, PM25] Uart available, clearing write errors..
19:53:40:875 -> [UART, PM25] Uart available, resetting event queue..
19:53:40:875 -> STATUS LED BLINK KAT
19:53:41:892 -> [UART, PM25] Reading data...
19:53:41:892 -> [UART, PM25] Data not available.
19:53:41:892 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:41:892 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:41:892 -> [UART, PM25] Uart available, clearing write errors..
19:53:41:892 -> [UART, PM25] Uart available, resetting event queue..
19:53:41:913 -> [UART, PM25] Reading data...
19:53:41:913 -> [UART, PM25] Data not available.
19:53:41:913 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:41:913 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:41:913 -> [UART, PM25] Uart available, clearing write errors..
19:53:41:913 -> [UART, PM25] Uart available, resetting event queue..
19:53:41:934 -> [UART, PM25] Reading data...
19:53:41:934 -> [UART, PM25] Data not available.
19:53:41:934 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:41:934 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:41:934 -> [UART, PM25] Uart available, clearing write errors..
19:53:41:934 -> [UART, PM25] Uart available, resetting event queue..
19:53:41:955 -> [UART, PM25] Reading data...
19:53:41:955 -> [UART, PM25] Data not available.
19:53:41:955 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:41:955 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:41:955 -> [UART, PM25] Uart available, clearing write errors..
19:53:41:955 -> [UART, PM25] Uart available, resetting event queue..
19:53:41:976 -> [UART, PM25] Reading data...
19:53:41:976 -> [UART, PM25] Data not available.
19:53:41:976 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:41:976 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:41:976 -> [UART, PM25] Uart available, clearing write errors..
19:53:41:976 -> [UART, PM25] Uart available, resetting event queue..
19:53:41:996 -> [UART, PM25] Reading data...
19:53:42:000 -> [UART, PM25] Data not available.
19:53:42:000 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:000 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:000 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:000 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:018 -> [UART, PM25] Reading data...
19:53:42:018 -> [UART, PM25] Data not available.
19:53:42:018 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:018 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:018 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:018 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:051 -> [UART, PM25] Reading data...
19:53:42:051 -> [UART, PM25] Data not available.
19:53:42:051 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:051 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:051 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:051 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:060 -> [UART, PM25] Reading data...
19:53:42:060 -> [UART, PM25] Data not available.
19:53:42:060 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:060 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:060 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:060 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:081 -> [UART, PM25] Reading data...
19:53:42:081 -> [UART, PM25] Data not available.
19:53:42:081 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:081 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:081 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:081 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:101 -> [UART, PM25] Reading data...
19:53:42:102 -> [UART, PM25] Data not available.
19:53:42:102 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:102 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:102 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:102 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:123 -> [UART, PM25] Reading data...
19:53:42:123 -> [UART, PM25] Data not available.
19:53:42:123 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:123 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:123 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:123 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:144 -> [UART, PM25] Reading data...
19:53:42:144 -> [UART, PM25] Data not available.
19:53:42:144 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:144 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:144 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:144 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:165 -> [UART, PM25] Reading data...
19:53:42:165 -> [UART, PM25] Data not available.
19:53:42:165 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:165 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:165 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:165 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:186 -> [UART, PM25] Reading data...
19:53:42:186 -> [UART, PM25] Data not available.
19:53:42:186 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:186 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:186 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:186 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:206 -> [UART, PM25] Reading data...
19:53:42:207 -> [UART, PM25] Data not available.
19:53:42:207 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:207 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:207 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:207 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:228 -> [UART, PM25] Reading data...
19:53:42:228 -> [UART, PM25] Data not available.
19:53:42:228 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:228 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:228 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:228 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:249 -> [UART, PM25] Reading data...
19:53:42:249 -> [UART, PM25] Data not available.
19:53:42:249 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:249 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:249 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:249 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:270 -> [UART, PM25] Reading data...
19:53:42:271 -> [UART, PM25] Data not available.
19:53:42:271 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:271 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:271 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:271 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:291 -> [UART, PM25] Reading data...
19:53:42:292 -> [UART, PM25] Data not available.
19:53:42:292 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:292 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:292 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:292 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:312 -> [UART, PM25] Reading data...
19:53:42:312 -> [UART, PM25] Data not available.
19:53:42:312 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:312 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:312 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:312 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:333 -> [UART, PM25] Reading data...
19:53:42:333 -> [UART, PM25] Data not available.
19:53:42:333 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:333 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:333 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:333 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:354 -> [UART, PM25] Reading data...
19:53:42:354 -> [UART, PM25] Data not available.
19:53:42:354 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:354 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:354 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:354 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:375 -> [UART, PM25] Reading data...
19:53:42:375 -> [UART, PM25] Data not available.
19:53:42:375 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:375 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:375 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:375 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:396 -> [UART, PM25] Reading data...
19:53:42:396 -> [UART, PM25] Data not available.
19:53:42:396 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:396 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:396 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:396 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:417 -> [UART, PM25] Reading data...
19:53:42:417 -> [UART, PM25] Data not available.
19:53:42:417 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:417 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:417 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:417 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:438 -> [UART, PM25] Reading data...
19:53:42:438 -> [UART, PM25] Data not available.
19:53:42:438 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:438 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:438 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:438 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:458 -> [UART, PM25] Reading data...
19:53:42:458 -> [UART, PM25] Data not available.
19:53:42:459 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:459 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:459 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:459 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:480 -> [UART, PM25] Reading data...
19:53:42:482 -> [UART, PM25] Data not available.
19:53:42:482 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:482 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:482 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:482 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:501 -> [UART, PM25] Reading data...
19:53:42:501 -> [UART, PM25] Data not available.
19:53:42:501 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:501 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:501 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:501 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:521 -> [UART, PM25] Reading data...
19:53:42:522 -> [UART, PM25] Data not available.
19:53:42:522 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:522 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:522 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:522 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:542 -> [UART, PM25] Reading data...
19:53:42:548 -> [UART, PM25] Data not available.
19:53:42:548 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:548 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:548 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:548 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:567 -> [UART, PM25] Reading data...
19:53:42:567 -> [UART, PM25] Data not available.
19:53:42:567 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:567 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:567 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:567 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:585 -> [UART, PM25] Reading data...
19:53:42:585 -> [UART, PM25] Data not available.
19:53:42:585 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:585 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:585 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:585 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:605 -> [UART, PM25] Reading data...
19:53:42:607 -> [UART, PM25] Data not available.
19:53:42:607 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:607 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:607 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:607 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:626 -> [UART, PM25] Reading data...
19:53:42:626 -> [UART, PM25] Data not available.
19:53:42:627 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:627 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:627 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:627 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:647 -> [UART, PM25] Reading data...
19:53:42:647 -> [UART, PM25] Data not available.
19:53:42:648 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:648 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:648 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:648 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:669 -> [UART, PM25] Reading data...
19:53:42:669 -> [UART, PM25] Data not available.
19:53:42:669 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:669 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:669 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:669 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:690 -> [UART, PM25] Reading data...
19:53:42:690 -> [UART, PM25] Data not available.
19:53:42:690 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:690 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:690 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:690 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:711 -> [UART, PM25] Reading data...
19:53:42:711 -> [UART, PM25] Data not available.
19:53:42:711 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:711 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:711 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:711 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:733 -> [UART, PM25] Reading data...
19:53:42:733 -> [UART, PM25] Data not available.
19:53:42:733 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:733 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:733 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:733 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:752 -> [UART, PM25] Reading data...
19:53:42:753 -> [UART, PM25] Data not available.
19:53:42:753 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:753 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:753 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:753 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:773 -> [UART, PM25] Reading data...
19:53:42:774 -> [UART, PM25] Data not available.
19:53:42:774 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:774 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:774 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:774 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:794 -> [UART, PM25] Reading data...
19:53:42:795 -> [UART, PM25] Data not available.
19:53:42:795 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:795 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:795 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:795 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:815 -> [UART, PM25] Reading data...
19:53:42:816 -> [UART, PM25] Data not available.
19:53:42:816 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:816 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:816 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:816 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:837 -> [UART, PM25] Reading data...
19:53:42:838 -> [UART, PM25] Data not available.
19:53:42:839 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:839 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:839 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:839 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:860 -> [UART, PM25] Reading data...
19:53:42:860 -> [UART, PM25] Data not available.
19:53:42:860 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:860 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:860 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:860 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:881 -> [UART, PM25] Reading data...
19:53:42:881 -> [UART, PM25] Data not available.
19:53:42:881 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:881 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:881 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:881 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:901 -> [UART, PM25] Reading data...
19:53:42:902 -> [UART, PM25] Data not available.
19:53:42:902 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:902 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:902 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:902 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:923 -> [UART, PM25] Reading data...
19:53:42:923 -> [UART, PM25] Data not available.
19:53:42:923 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:923 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:923 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:923 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:943 -> [UART, PM25] Reading data...
19:53:42:944 -> [UART, PM25] Data not available.
19:53:42:944 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:944 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:944 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:944 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:964 -> [UART, PM25] Reading data...
19:53:42:965 -> [UART, PM25] Data not available.
19:53:42:965 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:965 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:965 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:965 -> [UART, PM25] Uart available, resetting event queue..
19:53:42:986 -> [UART, PM25] Reading data...
19:53:42:986 -> [UART, PM25] Data not available.
19:53:42:986 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:42:986 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:42:986 -> [UART, PM25] Uart available, clearing write errors..
19:53:42:986 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:006 -> [UART, PM25] Reading data...
19:53:43:006 -> [UART, PM25] Data not available.
19:53:43:007 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:007 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:007 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:007 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:027 -> [UART, PM25] Reading data...
19:53:43:070 -> [UART, PM25] Data not available.
19:53:43:070 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:070 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:070 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:070 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:112 -> [UART, PM25] Reading data...
19:53:43:112 -> [UART, PM25] Data not available.
19:53:43:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:112 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:112 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:112 -> [UART, PM25] Reading data...
19:53:43:112 -> [UART, PM25] Data not available.
19:53:43:112 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:112 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:112 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:112 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:114 -> [UART, PM25] Reading data...
19:53:43:114 -> [UART, PM25] Data not available.
19:53:43:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:114 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:114 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:114 -> [UART, PM25] Reading data...
19:53:43:114 -> [UART, PM25] Data not available.
19:53:43:114 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:114 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:114 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:114 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:133 -> [UART, PM25] Reading data...
19:53:43:133 -> [UART, PM25] Data not available.
19:53:43:133 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:133 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:133 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:133 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:153 -> [UART, PM25] Reading data...
19:53:43:154 -> [UART, PM25] Data not available.
19:53:43:154 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:154 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:154 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:154 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:174 -> [UART, PM25] Reading data...
19:53:43:175 -> [UART, PM25] Data not available.
19:53:43:175 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:175 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:175 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:175 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:196 -> [UART, PM25] Reading data...
19:53:43:196 -> [UART, PM25] Data not available.
19:53:43:196 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:196 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:196 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:196 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:217 -> [UART, PM25] Reading data...
19:53:43:217 -> [UART, PM25] Data not available.
19:53:43:217 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:217 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:217 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:217 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:238 -> [UART, PM25] Reading data...
19:53:43:238 -> [UART, PM25] Data not available.
19:53:43:238 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:238 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:238 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:238 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:258 -> [UART, PM25] Reading data...
19:53:43:258 -> [UART, PM25] Data not available.
19:53:43:259 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:259 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:259 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:259 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:280 -> [UART, PM25] Reading data...
19:53:43:280 -> [UART, PM25] Data not available.
19:53:43:280 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:280 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:280 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:280 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:301 -> [UART, PM25] Reading data...
19:53:43:301 -> [UART, PM25] Data not available.
19:53:43:301 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:301 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:301 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:301 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:321 -> [UART, PM25] Reading data...
19:53:43:322 -> [UART, PM25] Data not available.
19:53:43:322 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:322 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:322 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:322 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:342 -> [UART, PM25] Reading data...
19:53:43:342 -> [UART, PM25] Data not available.
19:53:43:343 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:343 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:343 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:343 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:364 -> [UART, PM25] Reading data...
19:53:43:364 -> [UART, PM25] Data not available.
19:53:43:364 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:364 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:364 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:364 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:384 -> [UART, PM25] Reading data...
19:53:43:385 -> [UART, PM25] Data not available.
19:53:43:385 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:385 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:385 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:385 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:406 -> [UART, PM25] Reading data...
19:53:43:406 -> [UART, PM25] Data not available.
19:53:43:406 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:406 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:406 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:406 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:426 -> [UART, PM25] Reading data...
19:53:43:427 -> [UART, PM25] Data not available.
19:53:43:427 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:427 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:427 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:427 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:447 -> [UART, PM25] Reading data...
19:53:43:448 -> [UART, PM25] Data not available.
19:53:43:448 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:448 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:448 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:448 -> [UART, PM25] Uart available, resetting event queue..

19:53:43:469 -> [UART, PM25] Data not available.
19:53:43:469 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:469 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:469 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:469 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:468 -> [UART, PM25] Reading data...19:53:43:489 -> [UART, PM25] Reading data...
19:53:43:489 -> [UART, PM25] Data not available.
19:53:43:490 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:490 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:490 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:490 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:511 -> [UART, PM25] Reading data...
19:53:43:511 -> [UART, PM25] Data not available.
19:53:43:511 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:511 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:511 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:511 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:532 -> [UART, PM25] Reading data...
19:53:43:532 -> [UART, PM25] Data not available.
19:53:43:532 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:532 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:532 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:532 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:553 -> [UART, PM25] Reading data...
19:53:43:553 -> [UART, PM25] Data not available.
19:53:43:553 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:553 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:553 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:553 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:574 -> [UART, PM25] Reading data...
19:53:43:574 -> [UART, PM25] Data not available.
19:53:43:574 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:574 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:574 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:574 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:595 -> [UART, PM25] Reading data...
19:53:43:595 -> [UART, PM25] Data not available.
19:53:43:595 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:595 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:595 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:595 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:627 -> [UART, PM25] Reading data...
19:53:43:628 -> [UART, PM25] Data not available.
19:53:43:628 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:628 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:628 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:628 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:636 -> [UART, PM25] Reading data...
19:53:43:637 -> [UART, PM25] Data not available.
19:53:43:637 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:637 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:637 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:637 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:657 -> [UART, PM25] Reading data...
19:53:43:657 -> [UART, PM25] Data not available.
19:53:43:658 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:658 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:658 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:658 -> [UART, PM25] Uart available, resetting event queue..
19:53:43:679 -> [UART, PM25] Reading data...
19:53:43:679 -> [UART, PM25] Data not available.
19:53:43:679 -> [UART, PM25] Setting Hardware Serial to debug mode..
19:53:43:679 -> [UART, PM25] Uart available, flushing Hardware Serial..
19:53:43:679 -> [UART, PM25] Uart available, clearing write errors..
19:53:43:679 -> [UART, PM25] Uart available, resetting event queue..