build.sh

#!/bin/bash

# Copyright (c) 2019-2024, NVIDIA CORPORATION.

# cugraph build script

# This script is used to build the component(s) in this repo from
# source, and can be called with various options to customize the
# build as needed (see the help output for details)

# Abort script on first error
set -e

NUMARGS=$#
ARGS=$*

# NOTE: ensure all dir changes are relative to the location of this
# script, and that this script resides in the repo dir!
REPODIR=$(cd $(dirname $0); pwd)

RAPIDS_VERSION="$(sed -E -e 's/^([0-9]{2})\.([0-9]{2})\.([0-9]{2}).*$/\1.\2/' VERSION)"

# Valid args to this script (all possible targets and options) - only one per line
VALIDARGS="
   clean
   uninstall
   libcugraph
   libcugraph_etl
   pylibcugraph
   cugraph
   cugraph-service
   cpp-mgtests
   cpp-mtmgtests
   docs
   all
   -v
   -g
   -n
   --pydevelop
   --allgpuarch
   --skip_cpp_tests
   --cmake_default_generator
   --clean
   -h
   --help
"

HELP="$0 [<target> ...] [<flag> ...]
 where <target> is:
   clean                      - remove all existing build artifacts and configuration (start over)
   uninstall                  - uninstall libcugraph and cugraph from a prior build/install (see also -n)
   libcugraph                 - build libcugraph.so and SG test binaries
   libcugraph_etl             - build libcugraph_etl.so and SG test binaries
   pylibcugraph               - build the pylibcugraph Python package
   cugraph                    - build the cugraph Python package
   cugraph-service            - build the cugraph-service_client and cugraph-service_server Python package
   cpp-mgtests                - build libcugraph and libcugraph_etl MG tests. Builds MPI communicator, adding MPI as a dependency.
   cpp-mtmgtests              - build libcugraph MTMG tests. Adds UCX as a dependency (temporary).
   docs                       - build the docs
   all                        - build everything
 and <flag> is:
   -v                         - verbose build mode
   -g                         - build for debug
   -n                         - do not install after a successful build (does not affect Python packages)
   --pydevelop                - install the Python packages in editable mode
   --allgpuarch               - build for all supported GPU architectures
   --skip_cpp_tests           - do not build the SG test binaries as part of the libcugraph and libcugraph_etl targets
   --cmake_default_generator  - use the default cmake generator instead of ninja
   --clean                    - clean an individual target (note: to do a complete rebuild, use the clean target described above)
   -h                         - print this text

 default action (no args) is to build and install 'libcugraph' then 'libcugraph_etl' then 'pylibcugraph' and then 'cugraph' targets

 libcugraph build dir is: ${LIBCUGRAPH_BUILD_DIR}

 Set env var LIBCUGRAPH_BUILD_DIR to override libcugraph build dir.
"
LIBCUGRAPH_BUILD_DIR=${LIBCUGRAPH_BUILD_DIR:=${REPODIR}/cpp/build}
LIBCUGRAPH_ETL_BUILD_DIR=${LIBCUGRAPH_ETL_BUILD_DIR:=${REPODIR}/cpp/libcugraph_etl/build}
CUGRAPH_SERVICE_BUILD_DIRS="${REPODIR}/python/cugraph-service/server/build
                            ${REPODIR}/python/cugraph-service/client/build
"

BUILD_DIRS="${LIBCUGRAPH_BUILD_DIR}
            ${LIBCUGRAPH_ETL_BUILD_DIR}
            ${CUGRAPH_SERVICE_BUILD_DIRS}
"

# Set defaults for vars modified by flags to this script
VERBOSE_FLAG=""
CMAKE_VERBOSE_OPTION=""
BUILD_TYPE=Release
INSTALL_TARGET="--target install"
BUILD_CPP_TESTS=ON
BUILD_CPP_MG_TESTS=OFF
BUILD_CPP_MTMG_TESTS=OFF
BUILD_ALL_GPU_ARCH=0
CMAKE_GENERATOR_OPTION="-G Ninja"
PYTHON_ARGS_FOR_INSTALL="-m pip install --no-build-isolation --no-deps --config-settings rapidsai.disable-cuda=true"

# Set defaults for vars that may not have been defined externally
#  FIXME: if PREFIX is not set, check CONDA_PREFIX, but there is no fallback
#  from there!
INSTALL_PREFIX=${PREFIX:=${CONDA_PREFIX}}
PARALLEL_LEVEL=${PARALLEL_LEVEL:=`nproc`}
BUILD_ABI=${BUILD_ABI:=ON}

function hasArg {
    (( ${NUMARGS} != 0 )) && (echo " ${ARGS} " | grep -q " $1 ")
}

function buildDefault {
    (( ${NUMARGS} == 0 )) || !(echo " ${ARGS} " | grep -q " [^-][a-zA-Z0-9\_\-]\+ ")
}

function cleanPythonDir {
    pushd $1 > /dev/null
    rm -rf dist dask-worker-space cugraph/raft *.egg-info
    find . -type d -name __pycache__ -print | xargs rm -rf
    find . -type d -name build -print | xargs rm -rf
    find . -type d -name dist -print | xargs rm -rf
    find . -type f -name "*.cpp" -delete
    find . -type f -name "*.cpython*.so" -delete
    find . -type d -name _external_repositories -print | xargs rm -rf
    popd > /dev/null
}

if hasArg -h || hasArg --help; then
    echo "${HELP}"
    exit 0
fi

# Check for valid usage
if (( ${NUMARGS} != 0 )); then
    for a in ${ARGS}; do
        if ! (echo "${VALIDARGS}" | grep -q "^[[:blank:]]*${a}$"); then
            echo "Invalid option: ${a}"
            exit 1
        fi
    done
fi

# Process flags
if hasArg -v; then
    VERBOSE_FLAG="-v"
    CMAKE_VERBOSE_OPTION="--log-level=VERBOSE"
fi
if hasArg -g; then
    BUILD_TYPE=Debug
fi
if hasArg -n; then
    INSTALL_TARGET=""
fi
if hasArg --allgpuarch; then
    BUILD_ALL_GPU_ARCH=1
fi
if hasArg --skip_cpp_tests; then
    BUILD_CPP_TESTS=OFF
fi
if hasArg cpp-mtmgtests; then
    BUILD_CPP_MTMG_TESTS=ON
fi
if hasArg cpp-mgtests || hasArg all; then
    BUILD_CPP_MG_TESTS=ON
fi
if hasArg --cmake_default_generator; then
    CMAKE_GENERATOR_OPTION=""
fi
if hasArg --pydevelop; then
    PYTHON_ARGS_FOR_INSTALL="${PYTHON_ARGS_FOR_INSTALL} -e"
fi

SKBUILD_EXTRA_CMAKE_ARGS="${EXTRA_CMAKE_ARGS}"

# Replace spaces with semicolons in SKBUILD_EXTRA_CMAKE_ARGS
SKBUILD_EXTRA_CMAKE_ARGS=$(echo ${SKBUILD_EXTRA_CMAKE_ARGS} | sed 's/ /;/g')

# Append `-DFIND_CUGRAPH_CPP=ON` to EXTRA_CMAKE_ARGS unless a user specified the option.
if [[ "${EXTRA_CMAKE_ARGS}" != *"DFIND_CUGRAPH_CPP"* ]]; then
    SKBUILD_EXTRA_CMAKE_ARGS="${SKBUILD_EXTRA_CMAKE_ARGS};-DFIND_CUGRAPH_CPP=ON"
fi

# If clean or uninstall targets given, run them prior to any other steps
if hasArg uninstall; then
    if [[ "$INSTALL_PREFIX" != "" ]]; then
        rm -rf ${INSTALL_PREFIX}/include/cugraph
        rm -f ${INSTALL_PREFIX}/lib/libcugraph.so
        rm -rf ${INSTALL_PREFIX}/include/cugraph_c
        rm -f ${INSTALL_PREFIX}/lib/libcugraph_c.so
        rm -rf ${INSTALL_PREFIX}/include/cugraph_etl
        rm -f ${INSTALL_PREFIX}/lib/libcugraph_etl.so
        rm -rf ${INSTALL_PREFIX}/lib/cmake/cugraph
        rm -rf ${INSTALL_PREFIX}/lib/cmake/cugraph_etl
    fi
    # This may be redundant given the above, but can also be used in case
    # there are other installed files outside of the locations above.
    if [ -e ${LIBCUGRAPH_BUILD_DIR}/install_manifest.txt ]; then
        xargs rm -f < ${LIBCUGRAPH_BUILD_DIR}/install_manifest.txt > /dev/null 2>&1
    fi
    # uninstall cugraph and pylibcugraph installed from a prior install
    # FIXME: if multiple versions of these packages are installed, this only
    # removes the latest one and leaves the others installed. build.sh uninstall
    # can be run multiple times to remove all of them, but that is not obvious.
    pip uninstall -y pylibcugraph cugraph cugraph-service-client cugraph-service-server
fi

if hasArg clean; then
    # Ignore errors for clean since missing files, etc. are not failures
    set +e
    # remove artifacts generated inplace
    if [[ -d ${REPODIR}/python ]]; then
        cleanPythonDir ${REPODIR}/python
    fi

    # If the dirs to clean are mounted dirs in a container, the contents should
    # be removed but the mounted dirs will remain.  The find removes all
    # contents but leaves the dirs, the rmdir attempts to remove the dirs but
    # can fail safely.
    for bd in ${BUILD_DIRS}; do
        if [ -d ${bd} ]; then
            find ${bd} -mindepth 1 -delete
            rmdir ${bd} || true
        fi
    done
    # Go back to failing on first error for all other operations
    set -e
fi

################################################################################
# Configure, build, and install libcugraph
if buildDefault || hasArg libcugraph || hasArg all; then
    if hasArg --clean; then
        if [ -d ${LIBCUGRAPH_BUILD_DIR} ]; then
            find ${LIBCUGRAPH_BUILD_DIR} -mindepth 1 -delete
            rmdir ${LIBCUGRAPH_BUILD_DIR} || true
        fi
    else
        if (( ${BUILD_ALL_GPU_ARCH} == 0 )); then
            CUGRAPH_CMAKE_CUDA_ARCHITECTURES="NATIVE"
            echo "Building for the architecture of the GPU in the system..."
        else
            CUGRAPH_CMAKE_CUDA_ARCHITECTURES="RAPIDS"
            echo "Building for *ALL* supported GPU architectures..."
        fi
        mkdir -p ${LIBCUGRAPH_BUILD_DIR}
        cd ${LIBCUGRAPH_BUILD_DIR}
        cmake -B "${LIBCUGRAPH_BUILD_DIR}" -S "${REPODIR}/cpp" \
              -DCMAKE_INSTALL_PREFIX=${INSTALL_PREFIX} \
              -DCMAKE_CUDA_ARCHITECTURES=${CUGRAPH_CMAKE_CUDA_ARCHITECTURES} \
              -DCMAKE_BUILD_TYPE=${BUILD_TYPE} \
              -DBUILD_TESTS=${BUILD_CPP_TESTS} \
              -DBUILD_CUGRAPH_MG_TESTS=${BUILD_CPP_MG_TESTS} \
	      -DBUILD_CUGRAPH_MTMG_TESTS=${BUILD_CPP_MTMG_TESTS} \
              ${CMAKE_GENERATOR_OPTION} \
              ${CMAKE_VERBOSE_OPTION}
        cmake --build "${LIBCUGRAPH_BUILD_DIR}" -j${PARALLEL_LEVEL} ${INSTALL_TARGET} ${VERBOSE_FLAG}
    fi
fi

# Configure, build, and install libcugraph_etl
if buildDefault || hasArg libcugraph_etl || hasArg all; then
    if hasArg --clean; then
        if [ -d ${LIBCUGRAPH_ETL_BUILD_DIR} ]; then
            find ${LIBCUGRAPH_ETL_BUILD_DIR} -mindepth 1 -delete
            rmdir ${LIBCUGRAPH_ETL_BUILD_DIR} || true
        fi
    else
        if (( ${BUILD_ALL_GPU_ARCH} == 0 )); then
            CUGRAPH_CMAKE_CUDA_ARCHITECTURES="NATIVE"
            echo "Building for the architecture of the GPU in the system..."
        else
            CUGRAPH_CMAKE_CUDA_ARCHITECTURES="RAPIDS"
            echo "Building for *ALL* supported GPU architectures..."
        fi
        mkdir -p ${LIBCUGRAPH_ETL_BUILD_DIR}
         cd ${LIBCUGRAPH_ETL_BUILD_DIR}
        cmake -DCMAKE_INSTALL_PREFIX=${INSTALL_PREFIX} \
              -DCMAKE_CUDA_ARCHITECTURES=${CUGRAPH_CMAKE_CUDA_ARCHITECTURES} \
              -DDISABLE_DEPRECATION_WARNING=${BUILD_DISABLE_DEPRECATION_WARNING} \
              -DCMAKE_BUILD_TYPE=${BUILD_TYPE} \
              -DBUILD_TESTS=${BUILD_CPP_TESTS} \
              -DBUILD_CUGRAPH_MG_TESTS=${BUILD_CPP_MG_TESTS} \
              -DBUILD_CUGRAPH_MTMG_TESTS=${BUILD_CPP_MTMG_TESTS} \
              -DCMAKE_PREFIX_PATH=${LIBCUGRAPH_BUILD_DIR} \
              ${CMAKE_GENERATOR_OPTION} \
              ${CMAKE_VERBOSE_OPTION} \
              ${REPODIR}/cpp/libcugraph_etl
        cmake --build "${LIBCUGRAPH_ETL_BUILD_DIR}" -j${PARALLEL_LEVEL} ${INSTALL_TARGET} ${VERBOSE_FLAG}
    fi
fi

# Build, and install pylibcugraph
if buildDefault || hasArg pylibcugraph || hasArg all; then
    if hasArg --clean; then
        cleanPythonDir ${REPODIR}/python/pylibcugraph
    else
        SKBUILD_CMAKE_ARGS="${SKBUILD_EXTRA_CMAKE_ARGS}" \
            python ${PYTHON_ARGS_FOR_INSTALL} ${REPODIR}/python/pylibcugraph
    fi
fi

# Build and install the cugraph Python package
if buildDefault || hasArg cugraph || hasArg all; then
    if hasArg --clean; then
        cleanPythonDir ${REPODIR}/python/cugraph
    else
        SKBUILD_CMAKE_ARGS="${SKBUILD_EXTRA_CMAKE_ARGS}" \
            python ${PYTHON_ARGS_FOR_INSTALL} ${REPODIR}/python/cugraph
    fi
fi

# Install the cugraph-service-client and cugraph-service-server Python packages
if hasArg cugraph-service || hasArg all; then
    if hasArg --clean; then
        cleanPythonDir ${REPODIR}/python/cugraph-service
    else
        python ${PYTHON_ARGS_FOR_INSTALL} ${REPODIR}/python/cugraph-service/client
        python ${PYTHON_ARGS_FOR_INSTALL} ${REPODIR}/python/cugraph-service/server
    fi
fi

# Build the docs
if hasArg docs || hasArg all; then
    if [ ! -d ${LIBCUGRAPH_BUILD_DIR} ]; then
        mkdir -p ${LIBCUGRAPH_BUILD_DIR}
        cd ${LIBCUGRAPH_BUILD_DIR}
        cmake -B "${LIBCUGRAPH_BUILD_DIR}" -S "${REPODIR}/cpp" \
              -DCMAKE_INSTALL_PREFIX=${INSTALL_PREFIX} \
              -DCMAKE_BUILD_TYPE=${BUILD_TYPE} \
              ${CMAKE_GENERATOR_OPTION} \
              ${CMAKE_VERBOSE_OPTION}
    fi

    # for PROJECT in libwholegraph; do
    #     XML_DIR="${REPODIR}/docs/cugraph/${PROJECT}"
    #     rm -rf "${XML_DIR}"
    #     mkdir -p "${XML_DIR}"
    #     export XML_DIR_${PROJECT^^}="$XML_DIR"

    #     echo "downloading xml for ${PROJECT} into ${XML_DIR}. Environment variable XML_DIR_${PROJECT^^} is set to ${XML_DIR}"
    #     curl -O "https://d1664dvumjb44w.cloudfront.net/${PROJECT}/xml_tar/${RAPIDS_VERSION}/xml.tar.gz"
    #     tar -xzf xml.tar.gz -C "${XML_DIR}"
    #     rm "./xml.tar.gz"
    # done

    cd ${LIBCUGRAPH_BUILD_DIR}
    cmake --build "${LIBCUGRAPH_BUILD_DIR}" -j${PARALLEL_LEVEL} --target docs_cugraph ${VERBOSE_FLAG}

    echo "making libcugraph doc dir"
    rm -rf ${REPODIR}/docs/cugraph/libcugraph
    mkdir -p ${REPODIR}/docs/cugraph/libcugraph

    export XML_DIR_LIBCUGRAPH="${REPODIR}/cpp/doxygen/xml"

    cd ${REPODIR}/docs/cugraph
    make html
fi