README.md

OLED Ultrasonic

1: Wire The HC-SR04 Ultrasonic Sensor

• Connect the VCC and GND to the 5V and GND on the Arduino Nano Respectivly
• Connect the Trig to the D12 pin on the Arduino Nano
• Connect the Echo to the D11 pin on the Arduino Nano

2: Wire the OLED LCD Module via i2c

• Connect the VCC and GND to the 5v and GND pins on the Arduino Respectivly
• Connect the SCL to pin A5 on the Arduino
• Connect the SDA to pin A4 on the Arduino

3: Download and Open Code

• Download and Extract this repository to any folder on your PC

• Download and Open Arduino IDE

  • https://www.arduino.cc/en/software

• In the IDE go to Sketch, Include Library, then Add .ZIP Library

  

• Locate the Folder you downloaded and extracted this repository to, and load all the libraries in the libraries folder

  

• Load all 4 Libraries in the IDE

  

• Then Location the Code in the OLED_Ultrasonic Folder, and double click to open it or go to File, Open in the IDE

  

4: Run the code

• Plug in Your Arduino Nano into your PC

• Go to Select Board and Select the Port

  

• Then Select Arduino Nano and Choose the correct port, Then Press Ok

  

• Then You'll need to Click the Upload Button and it should all work