- Native builds using Visual C++
- Native builds using Embarcadero C++Builder
- Native builds using MinGW
- Linking native applications
- Hosted builds using Cygwin
There are various options to build and run OpenSSL on the Windows platforms.
"Native" OpenSSL uses the Windows APIs directly at run time. To build a native OpenSSL you can either use:
Microsoft Visual C++ (MSVC) C compiler on the command line
or Embarcadero C++Builder or MinGW cross compiler run on the GNU-like development environment MSYS2 or run on Linux or Cygwin
"Hosted" OpenSSL relies on an external POSIX compatibility layer for building (using GNU/Unix shell, compiler, and tools) and at run time. For this option, you can use Cygwin.
The native builds using Visual C++ have a VC-*
prefix.
In addition to the requirements and instructions listed in INSTALL.md
,
these are required as well:
We recommend Strawberry Perl, available from http://strawberryperl.com/ Please read NOTES.PERL for more information, including the use of CPAN. An alternative is ActiveState Perl, https://www.activestate.com/ActivePerl for which you may need to explicitly build the Perl module Win32/Console.pm via https://platform.activestate.com/ActiveState and then download it.
Since these are proprietary and ever-changing we cannot test them all. Older versions may not work. Use a recent version wherever possible.
NASM is the only supported assembler. It is available from https://www.nasm.us.
-
Install Perl
-
Install NASM
-
Make sure both Perl and NASM are on your %PATH%
-
Use Visual Studio Developer Command Prompt with administrative privileges, choosing one of its variants depending on the intended architecture. Or run
cmd
and executevcvarsall.bat
with one of the optionsx86
,x86_amd64
,x86_arm
,x86_arm64
,amd64
,amd64_x86
,amd64_arm
, oramd64_arm64
. This sets up the environment variables needed fornmake.exe
,cl.exe
, etc. See also https://docs.microsoft.com/cpp/build/building-on-the-command-line -
From the root of the OpenSSL source directory enter
perl Configure VC-WIN32
if you want 32-bit OpenSSL orperl Configure VC-WIN64A
if you want 64-bit OpenSSL orperl Configure VC-WIN64-ARM
if you want Windows on Arm (win-arm64) OpenSSL orperl Configure VC-WIN64-CLANGASM-ARM
if you want Windows on Arm (win-arm64) OpenSSL with assembly support using clang-cl as assembler orperl Configure VC-CLANG-WIN64-CLANGASM-ARM
if you want Windows on Arm (win-arm64) OpenSSL using clang-cl as both compiler and assembler orperl Configure VC-WIN32-HYBRIDCRT
if you want 32-bit OpenSSL dependent on the Universal CRT orperl Configure VC-WIN64A-HYBRIDCRT
if you want 64-bit OpenSSL dependent on the Universal CRT orperl Configure
to let Configure figure out the platform
-
nmake
-
nmake test
-
nmake install
For the full installation instructions, or if anything goes wrong at any stage, check the INSTALL.md file.
On most Unix platforms installation directories are determined at build time via constant defines. On Windows platforms however, installation directories are determined via registry keys, as it is common practice to build OpenSSL and install it to a variety of locations.
The following keys:
`\\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\OpenSSL-<version>-<ctx>\OPENSSLDIR`
`\\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\OpenSSL-<version>-<ctx>\ENGINESDIR`
`\\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\OpenSSL-<version>-<ctx>\MODULESDIR`
Can be administratively set, and openssl will take the paths found there as the values for OPENSSLDIR, ENGINESDIR and MODULESDIR respectively.
To enable the reading of registry keys from windows builds, add
-DOPENSSL_WINCTX=<string>
to the Configure command line. This define is used
at build-time to construct library build specific registry key paths of the
format:
\\HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432node\OpenSSL-<version>-<ctx>
Where <version>
is the major.minor version of the library being
built, and <ctx>
is the value specified by -DOPENSSL_WINCTX
. This allows
for multiple openssl builds to be created and installed on a single system, in
which each library can use its own set of registry keys.
Note the installer available at https://github.com/openssl/installer will set these keys when the installer is run.
A summary table of behavior on Windows platforms
OSSL_WINCTX |
Registry key | OpenSSL Behavior |
---|---|---|
Defined | Defined | OpenSSL Reads Paths from Registry |
Defined | Undefined | OpenSSL returns errors on module/conf load |
Undefined | N/A | OpenSSL uses build time defaults |
-
UWP targets only support building the static and dynamic libraries.
-
You should define the platform type to
uwp
and the target arch viavcvarsall.bat
before you compile. For example, if you want to buildarm64
builds, you should runvcvarsall.bat x86_arm64 uwp
.
This toolchain (a descendant of Turbo/Borland C++) is an alternative to MSVC.
OpenSSL currently includes an experimental 32-bit configuration targeting the
Clang-based compiler (bcc32c.exe
) in v10.3.3 Community Edition.
https://www.embarcadero.com/products/cbuilder/starter
-
Install Perl.
-
Open the RAD Studio Command Prompt.
-
Go to the root of the OpenSSL source directory and run:
perl Configure BC-32 --prefix=%CD%
-
make -N
-
make -N test
-
Build your program against this OpenSSL:
- Set your include search path to the "include" subdirectory of OpenSSL.
- Set your library search path to the OpenSSL source directory.
Note that this is very experimental. Support for 64-bit and other Configure options is still pending.
MinGW offers an alternative way to build native OpenSSL, by cross compilation.
-
Usually the build is done on Windows in a GNU-like environment called MSYS2.
MSYS2 provides GNU tools, a Unix-like command prompt, and a UNIX compatibility layer for applications. However, in this context it is only used for building OpenSSL. The resulting OpenSSL does not rely on MSYS2 to run and is fully native.
Requirement details
-
MSYS2 shell, from https://www.msys2.org/
-
Perl, at least version 5.10.0, which usually comes pre-installed with MSYS2
-
make, installed using
pacman -S make
into the MSYS2 environment -
MinGW[64] compiler:
mingw-w64-i686-gcc
and/ormingw-w64-x86_64-gcc
. These compilers must be on your MSYS2 $PATH. A common error is to not have these on your $PATH. The MSYS2 version of gcc will not work correctly here.
In the MSYS2 shell do the configuration depending on the target architecture:
./Configure mingw ...
or
./Configure mingw64 ...
or
./Configure ...
for the default architecture.
Apart from that, follow the Unix / Linux instructions in
INSTALL.md
. -
-
It is also possible to build mingw[64] on Linux or Cygwin.
In this case configure with the corresponding
--cross-compile-prefix=
option. For example./Configure mingw --cross-compile-prefix=i686-w64-mingw32- ...
or
./Configure mingw64 --cross-compile-prefix=x86_64-w64-mingw32- ...
This requires that you've installed the necessary add-on packages for mingw[64] cross compilation.
This section applies to all native builds.
If you link with static OpenSSL libraries, then you're expected to
additionally link your application with WS2_32.LIB
, GDI32.LIB
,
ADVAPI32.LIB
, CRYPT32.LIB
and USER32.LIB
. Those developing
non-interactive service applications might feel concerned about
linking with GDI32.LIB
and USER32.LIB
, as they are justly associated
with interactive desktop, which is not available to service
processes. The toolkit is designed to detect in which context it's
currently executed, GUI, console app or service, and act accordingly,
namely whether to actually make GUI calls. Additionally, those
who wish to /DELAYLOAD:GDI32.DLL
and /DELAYLOAD:USER32.DLL
and
actually keep them off service process should consider implementing
and exporting from .exe image in question own _OPENSSL_isservice
not
relying on USER32.DLL
. E.g., on Windows Vista and later you could:
__declspec(dllexport) __cdecl BOOL _OPENSSL_isservice(void)
{
DWORD sess;
if (ProcessIdToSessionId(GetCurrentProcessId(), &sess))
return sess == 0;
return FALSE;
}
If you link with OpenSSL .DLLs, then you're expected to include into your application code a small "shim" snippet, which provides the glue between the OpenSSL BIO layer and your compiler run-time. See also the OPENSSL_Applink manual page.
Cygwin implements a POSIX/Unix runtime system (cygwin1.dll
) on top of the
Windows subsystem and provides a Bash shell and GNU tools environment.
Consequently, a build of OpenSSL with Cygwin is virtually identical to the
Unix procedure.
To build OpenSSL using Cygwin, you need to:
-
Install Cygwin, see https://cygwin.com/
-
Install Cygwin Perl, at least version 5.10.0 and ensure it is in the $PATH
-
Run the Cygwin Bash shell
Apart from that, follow the Unix / Linux instructions in INSTALL.md.
NOTE: make test
and normal file operations may fail in directories
mounted as text (i.e. mount -t c:\somewhere /home
) due to Cygwin
stripping of carriage returns. To avoid this, ensure that a binary
mount is used, e.g. mount -b c:\somewhere /home
.