support for z8102ax eMMC #3698

giorez · 2024-12-07T12:55:27Z

giorez
Dec 7, 2024

I tryed to install the support for z8102ax firmware, unfortunatelly it doesn't boot. Any chance to add the z8102ax eMMC version? thanks

Ysurac · 2024-12-07T16:14:24Z

Ysurac
Dec 7, 2024
Maintainer

Do you have the exact model ? I don't know any z8102ax model with eMMCs support.

0 replies

giorez · 2024-12-07T17:43:53Z

giorez
Dec 7, 2024
Author

as far as I know is zbt z8102ax eMMC 8GB + ram 1GB. chip is mediatek MT7981. there is a working firmware at this link: https://forum.openwrt.org/t/adding-openwrt-support-for-zbt-z8102ax/171248/10. and I have also the vendor original installer, if you can do some reverse enginering.

In the factory firmware the router model is identified as "mt7981-emmc-rfb-z8102ax"

9 replies

Ysurac Dec 9, 2024
Maintainer

Both are same image, I think you mean 64 and 128m version.
You can try with a TTL to USB to check screen output. Without it, how do you know it's bootlooping ?
You can also try snapshot images: https://snapshots.openmptcprouter.com/6.6/

Remember that on OpenMPTCProuter, WAN port is the LAN port as LAN1-4 are used by default like a WAN to connect all others connections.

giorez Dec 9, 2024
Author

this is the bootloop of https://snapshots.openmptcprouter.com/6.6/

Reading from 0x880000 to 0x46000000, size 0x200 ... OK
Reading from 0x880000 to 0x46000000, size 0x552630 ... OK
## Loading kernel from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.59
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x460000e8
     Data Size:    5554364 Bytes = 5.3 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   94b61dad
     Hash algo:    sha1
     Hash value:   a424d2cb5002c725253ef86fefab6723798fcc33
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt z8102ax-128m device tree blob
     Type:         Flat Device Tree                                             
     Compression:  uncompressed                                                 
     Data Start:   0x4654c2e0                                                   
     Data Size:    24074 Bytes = 23.5 KiB                                       
     Architecture: AArch64                                                      
     Hash algo:    crc32                                                        
     Hash value:   436f2d31                                                     
     Hash algo:    sha1                                                         
     Hash value:   ea716689cf69a9ca12ad4506f31869667a1ce300                     
   Verifying Hash Integrity ... crc32+ sha1+ OK                                 
   Booting using the fdt blob at 0x4654c2e0                                     
Working FDT set to 4654c2e0                                                     
   Uncompressing Kernel Image                                                   
   Loading Device Tree to 000000007f7f0000, end 000000007f7f8e09 ... OK         
Working FDT set to 7f7f0000                                                     
                                                                                
Starting kernel ...                                                             
                                                                                
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]          
[    0.000000] Linux version 6.6.59 (runner@fv-az738-449) (aarch64-openwrt-linu4
[    0.000000] Machine model: ZBT Z8102AX 128M                                  
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')     
[    0.000000] printk: bootconsole [uart8250] enabled                           
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB0
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 Ki0
[    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 K0
[    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 Ki0
[    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 K0
[    0.000000] Zone ranges:                                                     
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]           
[    0.000000]   DMA32    empty                                                 
[    0.000000]   Normal   empty                                                 
[    0.000000] Movable zone start for each node                                 
[    0.000000] Early memory node ranges                                         
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]          
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]          
[    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]          
[    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]          
[    0.000000]   node   0: [mem 0x0000000048000000-0x000000007fffffff]          
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] 
[    0.000000] psci: probing for conduit method from DT.                        
[    0.000000] psci: PSCIv1.1 detected in firmware.                             
[    0.000000] psci: Using standard PSCI v0.2 function IDs                      
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.                           
[    0.000000] psci: SMC Calling Convention v1.2                                
[    0.000000] percpu: Embedded 28 pages/cpu s74792 r8192 d31704 u114688        
[    0.000000] pcpu-alloc: s74792 r8192 d31704 u114688 alloc=28*4096            
[    0.000000] pcpu-alloc: [0] 0 [0] 1                                          
[    0.000000] Detected VIPT I-cache on CPU0                                    
[    0.000000] CPU features: detected: GIC system register CPU interface        
[    0.000000] CPU features: kernel page table isolation disabled by kernel conn
[    0.000000] alternatives: applying boot alternatives                         
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console8
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048    
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off          
[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB      
[    0.000000] software IO TLB: area num 2.                                     
[    0.000000] software IO TLB: mapped [mem 0x000000007fb15000-0x000000007fc150)
[    0.000000] Memory: 1004412K/1048576K available (9664K kernel code, 1500K rw)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1       
[    0.000000] trace event string verifier disabled                             
[    0.000000] rcu: Hierarchical RCU implementation.                            
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.    
[    0.000000]  Tracing variant of Tasks RCU enabled.                           
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2     
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0                   
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode                      
[    0.000000] GICv3: 640 SPIs implemented                                      
[    0.000000] GICv3: 0 Extended SPIs implemented                               
[    0.000000] Root IRQ handler: gic_handle_irq                                 
[    0.000000] GICv3: GICv3 features: 16 PPIs                                   
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000   
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.   
[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).            
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398s
[    0.008315] Calibrating delay loop (skipped), value calculated using timer f)
[    0.018728] pid_max: default: 32768 minimum: 301                             
[    0.026307] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
[    0.033752] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.043848] cacheinfo: Unable to detect cache hierarchy for CPU 0            
[    0.050528] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adj.
[    0.058314] rcu: Hierarchical SRCU implementation.                           
[    0.063125] rcu:     Max phase no-delay instances is 1000.                   
[    0.068939] smp: Bringing up secondary CPUs ...                              
[    0.073872] Detected VIPT I-cache on CPU1                                    
[    0.073919] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000   
[    0.073950] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]       
[    0.074022] smp: Brought up 1 node, 2 CPUs                                   
[    0.095641] SMP: Total of 2 processors activated.                            
[    0.100364] CPU features: detected: 32-bit EL0 Support                       
[    0.105522] CPU features: detected: CRC32 instructions                       
[    0.110723] CPU features: emulated: Privileged Access Never (PAN) using TTBRg
[    0.119114] CPU: All CPU(s) started at EL2                                   
[    0.123235] alternatives: applying system-wide alternatives                  
[    0.129763] devtmpfs: initialized                                            
[    0.136194] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[    0.146110] futex hash table entries: 512 (order: 3, 32768 bytes, linear)    
[    0.153935] pinctrl core: initialized pinctrl subsystem                      
[    0.160290] NET: Registered PF_NETLINK/PF_ROUTE protocol family              
[    0.166612] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations 
[    0.173746] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic alls
[    0.181547] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
[    0.189918] thermal_sys: Registered thermal governor 'fair_share'            
[    0.189924] thermal_sys: Registered thermal governor 'bang_bang'             
[    0.196044] thermal_sys: Registered thermal governor 'step_wise'             
[    0.202089] thermal_sys: Registered thermal governor 'user_space'            
[    0.208193] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.    
[    0.221184] ASID allocator initialised with 65536 entries                    
[    0.227585] pstore: Using crash dump compression: deflate                    
[    0.233012] pstore: Registered ramoops as persistent store backend           
[    0.239238] ramoops: using 0x10000@0x42ff0000, ecc: 0                        
[    0.251973] Modules: 28032 pages in range for non-PLT usage                  
[    0.251985] Modules: 519552 pages in range for PLT usage                     
[    0.258609] cryptd: max_cpu_qlen set to 1000                                 
[    0.269504] SCSI subsystem initialized                                       
[    0.273763] libata version 3.00 loaded.                                      
[    0.279334] clocksource: Switched to clocksource arch_sys_counter            
[    0.288893] NET: Registered PF_INET protocol family                          
[    0.293974] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
[    0.303205] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192)
[    0.311647] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
[    0.319454] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
[    0.327292] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linea)
[    0.334741] TCP: Hash tables configured (established 8192 bind 8192)         
[    0.341522] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, lin)
[    0.349077] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)      
[    0.355760] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) 
[    0.363154] NET: Registered PF_UNIX/PF_LOCAL protocol family                 
[    0.368871] PCI: CLS 0 bytes, default 64                                     
[    0.374695] workingset: timestamp_bits=46 max_order=18 bucket_order=0        
[    0.386052] squashfs: version 4.0 (2009/01/31) Phillip Lougher               
[    0.391927] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[    0.434803] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    0.443910] gpio-export gpio-export: 5 gpio(s) exported                      
[    0.460381] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled         
[    0.475597] printk: console [ttyS0] disabled                                 
[    0.500347] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud =2
[    0.509586] printk: console [ttyS0] enabled                                  
[    0.509586] printk: console [ttyS0] enabled                                  
[    0.517943] printk: bootconsole [uart8250] disabled                          
[    0.517943] printk: bootconsole [uart8250] disabled                          
[    0.535186] loop: module loaded                                              
[    0.940626] spi-nand: probe of spi0.0 failed with error -110                 
[    1.081002] i2c_dev: i2c /dev entries driver                                 
[    1.087384] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, now)
[    1.132534] NET: Registered PF_INET6 protocol family                         
[    1.138233] Segment Routing with IPv6                                        
[    1.141961] In-situ OAM (IOAM) with IPv6                                     
[    1.145923] NET: Registered PF_PACKET protocol family                        
[    1.151020] bridge: filtering via arp/ip/ip6tables is no longer available by.
[    1.164214] 8021q: 802.1Q VLAN Support v1.8                                  
[    1.190147] phy phy-soc:[email protected]: type_sw - reg 0x218, index 0     
[    1.451030] clk: Disabling unused clocks                                     
[    1.455779] /dev/root: Can't open blockdev                                   
[    1.459906] VFS: Cannot open root device "" or unknown-block(0,0): error -6  
[    1.466853] Please append a correct "root=" boot option; here are the availa:
[    1.475202] List of all bdev filesystems:                                    
[    1.479198]  ext3                                                            
[    1.479200]  ext2                                                            
[    1.481118]  ext4                                                            
[    1.483031]  squashfs                                                        
[    1.484945]  f2fs                                                            
[    1.487205]                                                                  
[    1.490600] Kernel panic - not syncing: VFS: Unable to mount root fs on unkn)
[    1.498847] SMP: stopping secondary CPUs                                     
[    1.502760] Kernel Offset: disabled                                          
[    1.506235] CPU features: 0x0,00000000,00000000,1000400b                     
[    1.511534] Memory Limit: none                                               
[    1.516346] pstore: backend (ramoops) writing error (-28)                    
[    1.521733] Rebooting in 1 seconds..                                         
                                                                                
F0: 102B 0000                                                                   
FA: 1040 0000                                                                   
FA: 1040 0000 [0200]                                                            
F9: 103F 0000                                                                   
F3: 1006 0033 [0200]                                                            
F3: 4001 00E0 [0200]                                                            
F3: 0000 0000                                                                   
V0: 0000 0000 [0001]                                                            
00: 0000 0000                                                                   
BP: 2400 0041 [0000]                                                            
G0: 1190 0000                                                                   
EC: 0000 0000 [2000]                                                            
T0: 0000 02B0 [010F]                                                            
Jump to BL                                                                      
                                                                                
NOTICE:  BL2: v2.6(release):1e58996-dirty                                       
NOTICE:  BL2: Built : 00:49:17, Mar 21 2023                                     
NOTICE:  WDT: disabled                                                          
NOTICE:  EMI: Using DDR4 settings                                               
                                                                                
dump toprgu registers data:                                                     
1001c000 | 00000000 0000ffe0 00000000 00000000                                  
1001c010 | 00000fff 00000000 00f00000 00000000                                  
1001c020 | 00000000 00000000 00000000 00000000                                  
1001c030 | 003c0003 003c0003 00000000 00000000                                  
1001c040 | 00000000 00000000 00000000 00000000                                  
1001c050 | 00000000 00000000 00000000 00000000                                  
1001c060 | 00000000 00000000 00000000 00000000                                  
1001c070 | 00000000 00000000 00000000 00000000                                  
1001c080 | 00000000 00000000 00000000 00000000                                  
                                                                                
dump drm registers data:                                                        
1001d000 | 00000000 00000000 00000000 00000000                                  
1001d010 | 00000000 00000000 00000000 00000000                                  
1001d020 | 00000000 00000000 00000000 00000000                                  
1001d030 | 00a003f1 000000ff 00100000 00000000                                  
1001d040 | 00027e71 000200a0 00020303 000000ff                                  
1001d050 | 00000000 00000000 00000000 00000000                                  
1001d060 | 00000002 00000000 00000000 00000000                                  
drm: 500 = 0xc                                                                  
[DDR Reserve] ddr reserve mode not be enabled yet                               
DDR RESERVE Success 0                                                           
[EMI] ComboMCP not ready, using default setting                                 
BYTE_swap:0                                                                     
BYTE_swap:0                                                                     
Window Sum 572, worse bit 3, min window 68                                      
Window Sum 588, worse bit 8, min window 72                                      
[TxChooseVref] Worse bit 6, Min win 24, Win sum 415, Final Vref 38              
Window Sum 196, worse bit 5, min window 14                                      
Window Sum 238, worse bit 10, min window 20                                     
Window Sum 238, worse bit 3, min window 22                                      
Window Sum 260, worse bit 10, min window 24                                     
Window Sum 272, worse bit 3, min window 28                                      
Window Sum 282, worse bit 10, min window 30                                     
Window Sum 294, worse bit 5, min window 30                                      
Window Sum 302, worse bit 10, min window 32                                     
Window Sum 310, worse bit 3, min window 34                                      
Window Sum 318, worse bit 10, min window 34                                     
Window Sum 340, worse bit 2, min window 40                                      
Window Sum 338, worse bit 10, min window 38                                     
Window Sum 354, worse bit 2, min window 42                                      
Window Sum 356, worse bit 10, min window 40                                     
Window Sum 374, worse bit 3, min window 44                                      
Window Sum 364, worse bit 10, min window 42                                     
Window Sum 382, worse bit 2, min window 44                                      
Window Sum 386, worse bit 10, min window 44                                     
Window Sum 392, worse bit 3, min window 46                                      
Window Sum 392, worse bit 10, min window 46                                     
Window Sum 402, worse bit 3, min window 46                                      
Window Sum 406, worse bit 10, min window 46                                     
Window Sum 416, worse bit 2, min window 50                                      
Window Sum 418, worse bit 10, min window 48                                     
Window Sum 424, worse bit 3, min window 50                                      
Window Sum 426, worse bit 10, min window 48                                     
Window Sum 434, worse bit 3, min window 50                                      
Window Sum 440, worse bit 10, min window 52                                     
Window Sum 440, worse bit 2, min window 52                                      
Window Sum 448, worse bit 10, min window 52                                     
Window Sum 454, worse bit 1, min window 56                                      
Window Sum 462, worse bit 8, min window 56                                      
Window Sum 462, worse bit 1, min window 56                                      
Window Sum 464, worse bit 8, min window 56                                      
Window Sum 464, worse bit 1, min window 56                                      
NOTICE:  EMI: Detected DRAM size: 1024MB                                        
NOTICE:  EMI: complex R/W mem test passed                                       
NOTICE:  CPU: MT7981 (1300MHz)                                                  
NOTICE:  BL2: Booting BL31                                                      
NOTICE:  BL31: v2.7(release):                                                   
NOTICE:  BL31: Built : 02:40:01, Nov 22 2023                                    
NOTICE:  Hello BL31!!!                                                          
                                                                                
                                                                                
U-Boot 2023.07 (Nov 22 2023 - 02:35:10 -0800)                                   
                                                                                
CPU:   MediaTek MT7981                                                          
Model: mt7981-rfb                                                               
       (mediatek,mt7981-rfb)                                                    
DRAM:  1 GiB                                                                    
Core:  42 devices, 17 uclasses, devicetree: separate                            
MMC:   mmc@11230000: 0                                                          
Loading Environment from MMC... *** Warning - bad CRC, using default environment
                                                                                
In:    serial@11002000                                                          
Out:   serial@11002000                                                          
Err:   serial@11002000                                                          
Net:                                                                            
Warning: ethernet@15100000 (eth0) using random MAC address - 66:12:e7:20:ca:2e  
eth0: ethernet@15100000                                                         


  *** U-Boot Boot Menu ***

      1. Startup system (Default)
      2. Upgrade firmware
      3. Upgrade ATF BL2
      4. Upgrade ATF FIP
      5. Upgrade ATF BL31 only
      6. Upgrade bootloader only
      7. Upgrade partition table
      8. Upgrade single image
      9. Load image
      a. Start Web failsafe
      0. U-Boot console


  Press UP/DOWN to move, ENTER to select, ESC to quit

Ysurac Dec 9, 2024
Maintainer

I only have NAND version in fact, I will what I can do to support eMMC.

giorez Dec 9, 2024
Author

great, thanks

giorez Dec 12, 2024
Author

@Ysurac

I did some progress: I TFTPed the kernel image and below is the bootlog. The router become accessible only via serial ssh, but no way to access it via browser or via ip address. Regarding factory image and sysupgrade image I got "Wrong Image Format for bootm command. ERROR: can't get kernel image!" Waiting for your feedback. thanks a lot for your support.

BOOT LOG from .BIN KERNEL

-------------------------------
MT7981> tftpboot /srv/tftp/02_kernel.bin
Using ethernet@15100000 device
TFTP from server 192.168.1.31; our IP address is 192.168.1.1
Filename '/srv/tftp/02_kernel.bin'.
Load address: 0x46000000
Loading: ######################################################         ######################################################         ######################################################         ######################################################         ######################################################         ######################################################         ######################################################################################################################################################## 9.2 MiB/s
done
Bytes transferred = 8742672 (856710 hex)

-------------------------------
MT7981> bootm

## Loading kernel from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'kernel-1' kernel subimage
     Description:  ARM64 OpenWrt Linux-6.6.63
     Type:         Kernel Image
     Compression:  lzma compressed
     Data Start:   0x460000e8
     Data Size:    4394713 Bytes = 4.2 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x48000000
     Entry Point:  0x48000000
     Hash algo:    crc32
     Hash value:   baf1b8a1
     Hash algo:    sha1
     Hash value:   635b63ea2c3cad3870bcdc68a2605e46bdec78f6
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading ramdisk from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'initrd-1' ramdisk subimage
     Description:  ARM64 OpenWrt zbtlink_zbt-z8102ax initrd
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x46431104
     Data Size:    4322312 Bytes = 4.1 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    crc32
     Hash value:   7d9bd10c
     Hash algo:    sha1
     Hash value:   46032456c3da5e53b115e78927fda07204b216be
   Verifying Hash Integrity ... crc32+ sha1+ OK
## Loading fdt from FIT Image at 46000000 ...
   Using 'config-1' configuration
   Trying 'fdt-1' fdt subimage
     Description:  ARM64 OpenWrt zbtlink_zbt-z8102ax device tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x4685061c
     Data Size:    23482 Bytes = 22.9 KiB
     Architecture: AArch64
     Hash algo:    crc32
     Hash value:   bfbfd364
     Hash algo:    sha1
     Hash value:   3809f725beb3eab7bbf63a37a6707a9788302d74
   Verifying Hash Integrity ... crc32+ sha1+ OK
   Booting using the fdt blob at 0x4685061c
Working FDT set to 4685061c
   Uncompressing Kernel Image
   Loading Ramdisk to 7f3da000, end 7f7f9408 ... OK
   Loading Device Tree to 000000007f3d1000, end 000000007f3d9bb9 ... OK
Working FDT set to 7f3d1000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    0.000000] Linux version 6.6.63 (builder@buildhost) (aarch64-openwrt-linux-4
[    0.000000] Machine model: Zbtlink ZBT-Z8102AX
[    0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] OF: reserved mem: 0x0000000042ff0000..0x0000000042ffffff (64 KiB0
[    0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 Ki0
[    0.000000] OF: reserved mem: 0x0000000047c80000..0x0000000047d7ffff (1024 K0
[    0.000000] OF: reserved mem: 0x0000000047d80000..0x0000000047dbffff (256 Ki0
[    0.000000] OF: reserved mem: 0x0000000047dc0000..0x0000000047ffffff (2304 K0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000]   DMA32    empty
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000042ffffff]
[    0.000000]   node   0: [mem 0x0000000043000000-0x000000004302ffff]
[    0.000000]   node   0: [mem 0x0000000043030000-0x0000000047c7ffff]
[    0.000000]   node   0: [mem 0x0000000047c80000-0x0000000047ffffff]
[    0.000000]   node   0: [mem 0x0000000048000000-0x000000007fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff]
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.2
[    0.000000] percpu: Embedded 18 pages/cpu s35560 r8192 d29976 u73728
[    0.000000] pcpu-alloc: s35560 r8192 d29976 u73728 alloc=18*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation disabled by kernel conn
[    0.000000] alternatives: applying boot alternatives
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console8
[    0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, l)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 258048
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: SWIOTLB bounce buffer size adjusted to 1MB
[    0.000000] software IO TLB: area num 2.
[    0.000000] software IO TLB: mapped [mem 0x000000007fb26000-0x000000007fc260)
[    0.000000] Memory: 1005632K/1048576K available (9024K kernel code, 998K rwd)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 ji.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[    0.000000] GICv3: 640 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] Root IRQ handler: gic_handle_irq
[    0.000000] GICv3: GICv3 features: 16 PPIs
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
[    0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398s
[    0.008146] Calibrating delay loop (skipped), value calculated using timer f)
[    0.018557] pid_max: default: 32768 minimum: 301
[    0.026076] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, lin)
[    0.033522] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.043591] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.050243] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adj.
[    0.059686] rcu: Hierarchical SRCU implementation.
[    0.064497] rcu:     Max phase no-delay instances is 1000.
[    0.070164] smp: Bringing up secondary CPUs ...
[    0.075072] Detected VIPT I-cache on CPU1
[    0.075116] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
[    0.075147] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    0.075218] smp: Brought up 1 node, 2 CPUs
[    0.096834] SMP: Total of 2 processors activated.
[    0.101556] CPU features: detected: 32-bit EL0 Support
[    0.106714] CPU features: detected: CRC32 instructions
[    0.111915] CPU features: emulated: Privileged Access Never (PAN) using TTBRg
[    0.120305] CPU: All CPU(s) started at EL2
[    0.124425] alternatives: applying system-wide alternatives
[    0.133983] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[    0.143896] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.151974] pinctrl core: initialized pinctrl subsystem
[    0.158298] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164875] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
[    0.172010] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic alls
[    0.179807] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic as
[    0.188147] thermal_sys: Registered thermal governor 'fair_share'
[    0.188153] thermal_sys: Registered thermal governor 'bang_bang'
[    0.194272] thermal_sys: Registered thermal governor 'step_wise'
[    0.200316] thermal_sys: Registered thermal governor 'user_space'
[    0.206421] ASID allocator initialised with 65536 entries
[    0.218900] pstore: Using crash dump compression: deflate
[    0.224338] pstore: Registered ramoops as persistent store backend
[    0.230545] ramoops: using 0x10000@0x42ff0000, ecc: 0
[    0.243268] Modules: 29376 pages in range for non-PLT usage
[    0.243279] Modules: 520896 pages in range for PLT usage
[    0.250198] cryptd: max_cpu_qlen set to 1000
[    0.261003] SCSI subsystem initialized
[    0.264950] libata version 3.00 loaded.
[    0.270571] clocksource: Switched to clocksource arch_sys_counter
[    0.279015] NET: Registered PF_INET protocol family
[    0.284058] IP idents hash table entries: 16384 (order: 5, 131072 bytes, lin)
[    0.293195] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192)
[    0.301612] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
[    0.309398] TCP established hash table entries: 8192 (order: 4, 65536 bytes,)
[    0.317239] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linea)
[    0.324681] TCP: Hash tables configured (established 8192 bind 8192)
[    0.331463] MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, lin)
[    0.339016] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.345693] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    0.353083] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.358818] PCI: CLS 0 bytes, default 64
[    0.362966] Unpacking initramfs...
[    0.372897] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[    0.384236] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.390111] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORI.
[    0.433162] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[    0.442248] gpio-export gpio-export: 5 gpio(s) exported
[    0.457162] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.467331] printk: console [ttyS0] disabled
[    0.492037] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 72, base_baud =2
[    0.501272] printk: console [ttyS0] enabled
[    0.501272] printk: console [ttyS0] enabled
[    0.509646] printk: bootconsole [uart8250] disabled
[    0.509646] printk: bootconsole [uart8250] disabled
[    0.525446] loop: module loaded
[    0.531308] spi-nand spi0.0: unknown raw ID 0000000000
[    0.536452] spi-nand: probe of spi0.0 failed with error -524
[    0.672680] i2c_dev: i2c /dev entries driver
[    0.678632] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, now)
[    0.687866] NET: Registered PF_INET6 protocol family
[    0.694465] Segment Routing with IPv6
[    0.698173] In-situ OAM (IOAM) with IPv6
[    0.702229] NET: Registered PF_PACKET protocol family
[    0.707325] bridge: filtering via arp/ip/ip6tables is no longer available by.
[    0.720650] 8021q: 802.1Q VLAN Support v1.8
[    0.749038] phy phy-soc:[email protected]: type_sw - reg 0x218, index 0
[    1.012692] clk: Disabling unused clocks
[    1.636669] Freeing initrd memory: 4220K
[    1.655790] Freeing unused kernel memory: 448K
[    1.660305] Run /init as init process
[    1.664011]   with arguments:
[    1.666970]     /init
[    1.669232]   with environment:
[    1.672365]     HOME=/
[    1.674714]     TERM=linux
[    1.836176] init: Console is alive
[    1.839721] init: - watchdog -
[    1.848258] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    1.863483] usbcore: registered new interface driver usbfs
[    1.869022] usbcore: registered new interface driver hub
[    1.874458] usbcore: registered new device driver usb
[    1.880031] gpio_button_hotplug: loading out-of-tree module taints kernel.
[    1.892083] xhci-mtk 11200000.usb: supply vbus not found, using dummy regular
[    1.900242] xhci-mtk 11200000.usb: xHCI Host Controller
[    1.905536] xhci-mtk 11200000.usb: new USB bus registered, assigned bus numb1
[    1.915945] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 q0
[    1.925159] xhci-mtk 11200000.usb: irq 79, io mem 0x11200000
[    1.930965] xhci-mtk 11200000.usb: xHCI Host Controller
[    1.936187] xhci-mtk 11200000.usb: new USB bus registered, assigned bus numb2
[    1.943605] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
[    1.951144] hub 1-0:1.0: USB hub found
[    1.954942] hub 1-0:1.0: 1 port detected
[    1.959231] usb usb2: We don't know the algorithms for LPM for this host, di.
[    1.967824] hub 2-0:1.0: USB hub found
[    1.971646] hub 2-0:1.0: 1 port detected
[    1.979927] kmodloader: done loading kernel modules from /etc/modules-boot.d*
[    1.997882] init: - preinit -
ip: SIOCGIFFLAGS: No such device
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    2.440571] usb 1-1: new high-speed USB device number 2 using xhci-mtk
[    2.623900] hub 1-1:1.0: USB hub found
[    2.627936] hub 1-1:1.0: 4 ports detected
[    2.770733] usb 2-1: new SuperSpeed USB device number 2 using xhci-mtk
[    2.809365] hub 2-1:1.0: USB hub found
[    2.813945] hub 2-1:1.0: 4 ports detected
[    6.363890] random: procd: uninitialized urandom read (4 bytes read)
[    6.366547] procd: - early -
[    6.373321] procd: - watchdog -
[    6.902462] procd: - watchdog -
[    6.905769] procd: - ubus -
[   12.220707] platform 15100000.ethernet: deferred probe pending
[   14.270572] random: crng init done
[   14.276641] procd: - init -
Please press Enter to activate this console.
[   14.467198] kmodloader: loading kernel modules from /etc/modules.d/*
[   14.483784] crypto-safexcel 10320000.crypto: EIP97:230(0,1,4,4)-HIA:270(0,5,0
[   14.499027] usbcore: registered new interface driver cdc_wdm
[   14.505331] Loading modules backported from Linux version v6.11.2-0-g7aa21feb
[   14.512841] Backport generated by backports.git v6.1.110-1-32-gc61f71fe0942
[   14.527523] usbcore: registered new interface driver usbserial_generic
[   14.534198] usbserial: USB Serial support registered for generic
[   14.679609] urngd: v1.0.2 started.
[   14.880748] mt798x-wmac 18000000.wifi: HW/SW Version: 0x8a108a10, Build Timea
[   14.880748] 
[   14.902838] mt798x-wmac 18000000.wifi: WM Firmware Version: ____000000, Buil4
[   14.944808] mt798x-wmac 18000000.wifi: WA Firmware Version: DEV_000000, Buil1
[   15.042804] mt798x-wmac 18000000.wifi: eeprom load fail, use default bin
[   15.049566] mt798x-wmac 18000000.wifi: Direct firmware load for mediatek/mt72
[   15.060698] mt798x-wmac 18000000.wifi: Falling back to sysfs fallback for: mn
[   15.096815] mt798x-wmac: probe of 18000000.wifi failed with error -12
[   15.127189] PPP generic driver version 2.4.2
[   15.132745] NET: Registered PF_PPPOX protocol family
[   15.138911] usbcore: registered new interface driver qmi_wwan
[   15.147728] usbcore: registered new interface driver option
[   15.153429] usbserial: USB Serial support registered for GSM modem (1-port)
[   15.162279] kmodloader: done loading kernel modules from /etc/modules.d/*

HIT A KEY

BusyBox v1.37.0 (2024-12-09 19:10:43 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r28277-59dd9cddf9
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------

 OpenWrt recently switched to the "apk" package manager!

 OPKG Command           APK Equivalent      Description
 ------------------------------------------------------------------
 opkg install <pkg>     apk add <pkg>       Install a package
 opkg remove <pkg>      apk del <pkg>       Remove a package
 opkg upgrade           apk upgrade         Upgrade all packages
 opkg files <pkg>       apk info -L <pkg>   List package contents
 opkg list-installed    apk info            List installed packages
 opkg update            apk update          Update package lists
 opkg search <pkg>      apk search <pkg>    Search for packages
 ------------------------------------------------------------------

For more https://openwrt.org/docs/guide-user/additional-software/opkg-to-apk-cht

root@OpenWrt:~#

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

support for z8102ax eMMC #3698

{{title}}

Replies: 2 comments 9 replies

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

{{title}}

{{title}}

{{title}}

{{editor}}'s edit

{{editor}}'s edit

Select a reply

support for z8102ax eMMC #3698

giorez Dec 7, 2024

Replies: 2 comments · 9 replies

Ysurac Dec 7, 2024 Maintainer

giorez Dec 7, 2024 Author

Ysurac Dec 9, 2024 Maintainer

giorez Dec 9, 2024 Author

Ysurac Dec 9, 2024 Maintainer

giorez Dec 9, 2024 Author

giorez Dec 12, 2024 Author

giorez
Dec 7, 2024

Replies: 2 comments 9 replies

Ysurac
Dec 7, 2024
Maintainer

giorez
Dec 7, 2024
Author

Ysurac Dec 9, 2024
Maintainer

giorez Dec 9, 2024
Author

Ysurac Dec 9, 2024
Maintainer

giorez Dec 9, 2024
Author

giorez Dec 12, 2024
Author