Retract before outer wall doesnt work

[navi21]

Cura Version

5.8.1

Operating System

windows 10

Printer

creality cr10

Reproduction steps

check retract before outer wall, slice model then print

Actual results

while printing its visible that it doesnt retract, it leaks while traveling from infill to outer wall, and outer wall has a gap because nozzle looses pressure before it needs to start outer wall

Expected results

retraction before outer wall works and there is no artifacts on outer wall

Add your .zip and screenshots here ⬇️

https://we.tl/t-gHL6ind3c6

[GregValiant]

Thanks for the report.
I can duplicate this in both 5.8.0 and 5.9.0beta2.

@HellAholic might have time to take a look.

[GregValiant]

In regards to things happening at the Zseam in 5.9.0-beta.2
With Z-hops turned off and Scarf Seam Length set to "0.0", I get this movement at the end of every Layer.
;MESH:NONMESH
G0 F600 X160.4 Y69.4 Z66.5
G0 F10500 X160.77 Y69.67 Z66.25
then
;LAYER:265
;MESH:Timer Cover.stl
G0 X161.6 Y69.9 Z66.5
That up-down-shuffle is unexpected and unwanted.

[HellAholic]

The retraction for layer 0 works but on higher layers it's getting either skipped or replaced,

G1 X64.705 Y65.86 E73.65361
G1 X44.54 Y65.86 E75.18279
G1 F1800 E73.78279
;MESH:2x2 cube.stl
G0 F6000 X45.154 Y64.346
G0 X64.308 Y64.66
;TYPE:WALL-OUTER
G1 F1800 E75.18279

We have a PR with the fix for the hop at end of layer, I can check if that resolves the issue and returns the behavior to normal but I doubt it would since you mentioned you saw the issue also in 5.8.0.
Checked the 5.8.1, it's the same behavior, I'll update with a ticket tomorrow.

it is tomorrow: CURA-12275

[MariMakes]

👋 Quick update on our side.
This is resolved in the 5.9 release 🎉 , you can download the Cura version with the fix here: https://github.com/Ultimaker/Cura/releases/tag/5.9.0

I'll close this issue since it's resolved.
Thanks again, and please let us know if you run into any other issues 💪