Pressure Advance Pattern Calibration does not change speed values

[Finnitio]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.2.0

Operating System (OS)

Windows

OS Version

Windows 11 latest

Additional system information

Ryzen 9 5900X
B450 ROG STRIX Gaming F
DDR4 3200 MHz
Quadro P2000

Printer

CR10 Pro V2

How to reproduce

Create Pressure Advance Pattern Calibration
Change Speed for solid inner infill

Actual results

Speed is not affected by changed speed parameters

Expected results

speed is changed by parameters.

Project file & Debug log uploads

Cube.zip

Checklist of files to include

• Log file
• Project file

Anything else?

There was no recent log latest log from crash only

[MxBrnr]

This is talked about in the Pressure Advance Pattern Method calibration tutorial (https://github.com/SoftFever/OrcaSlicer/wiki/Calibration#pattern-method). It is how the test is designed and coded, so actually not a bug.

[Ergonomicmike]

I printed the PA Tower for the first time the other day. I noticed that the speed of the Tower also appears to be hardcoded at 100 mm/s.

That's fine for PLA I suppose. But I was printing PETG and would like the ability to set the speed.

Or offer a few different Towers hard coded for a few different speeds?

I was going to post a Feature Request. But thought I would tack on here.

[Finnitio]

okay, thank you that makes sense. I was following the adaptive pressure adavance guide, thus exspecting everything in there to be correct. Since Orca Slicer diplays the lines as solid infill I thought these were the correct settings:

Maybe it does make sense to get the speed form the internal solid infll as is schon in the preview, thus there is no discrepancy?