NFC Usage for both versions | Seeed Studio Wiki

[giscus[bot]]

NFC Usage for both versions | Seeed Studio Wiki

NFC Usage for XIAO nRF52840 (Sense)

https://wiki.seeedstudio.com/XIAO-BLE-Sense-NFC-Usage/

[welllrafael]

Any updates about Seeed Studio XIAO nRF52840 board ?

[EdgarMoon]

Hello,
I also tried find a way to use NFC back in time. Finally, I can use NFC. I just checked.

I used 2.9.2 version of Seeed nRF52 mbed-enabled Board. NFC example included in that version.

Also, you need to add some capacitance on NFC Pins to work.

Please refer to link below, There is picture that showing how to add Caps on the board.

https://forum.seeedstudio.com/t/xiao-ble-nfc-doesnt-work/264543/13

It works on my Seeed board. So, I hope it works as well to you

[andriandreo]

USER UPDATE

I managed to replicate the example code above using the "Seeed nRF52 mbed-enabled Boards Library" as stated and both antennas below:

• MOLEX 1462360051
• TAOGLAS FXR.07.A.DG

Both worked right just after soldering without further circuit tuning. Later, I added two 43 pF tuning caps from each NFC pad to GND to further enhance the interrogation distance for the TAOGLAS FXR.07.A.DG.

The ~40 pF cap value was calculated from subsection "6.14.10 NFCT antenna recommendations" in nRF52840 MCU product specification datasheet.

---

Pics along with this info can be also found in the Seeed Studio forum topic below:

https://forum.seeedstudio.com/t/xiao-nrf52840-nfc-antenna-insights/277696

[MatthewJeffson]

Wow! Thank you guys for providing the updates!
Best Regards,
Matthew