disk-burnin.sh

#!/bin/sh
################################################################################
#
# disk-burnin.sh
# 
################################################################################

################################################################################
# PRE-EXECUTION VALIDATION
################################################################################

# Check if running as root
if [ "$(id -u)" -ne 0 ]; then
  echo "ERROR: Must be run as root" >&2
  exit 2
fi

# Check required dependencies
readonly DEPENDENCIES="awk badblocks grep sed sleep smartctl"
for dependency in ${DEPENDENCIES}; do
  if ! command -v "${dependency}" > /dev/null 2>&1; then
    echo "ERROR: Command '${dependency}' not found" >&2
    exit 2
  fi
done

readonly USAGE=\
"NAME
    $(basename "$0") -- disk burn-in program

SYNOPSIS
    $(basename "$0") [-h] [-b <block_size>] [-c <num_blocks>] [-e] [-f] [-o <directory>] [-x] <disk>

DESCRIPTION
    A script to simplify the process of burning-in disks. Only intended for use
    on disks which do not contain any data, such as new disks or disks which
    are being tested or re-purposed.

    The script runs in dry-run mode by default, so you can check the sleep
    durations and to insure that the sequence of commands suits your needs. In
    dry-run mode the script does not actually perform any SMART tests or invoke
    the sleep or badblocks programs.

    In order to perform tests on drives, you will need to provide the -f option.

OPTIONS
    -h                Show help text
    -e                Show extended help text
    -b <block_size>   Override block size (defaults to 8192)
    -c <num_blocks>   Override concurrent number of blocks tested
    -f                Force script to run in destructive mode
                      ALL DATA ON THE DISK WILL BE LOST!
    -o <directory>    Write log files to <directory> (default: $(pwd))
    -x                Run full pass of badblocks instead of exiting on first error
    <disk>            Disk to burn-in (/dev/ may be omitted)

EXAMPLES
    $(basename "$0") sda
                      run in dry-run mode on disk /dev/sda

    $(basename "$0") -f /dev/sdb
                      run in destructive, non-dry mode on disk /dev/sdb

    $(basename "$0") -f -o ~/burn-in-logs sdc
                      run in destructive, non-dry mode on disk /dev/sdc and
                      write the log files to ~/burn-in-logs directory
"
readonly USAGE_2=\
"EXIT STATUS
    exit 0:           script finishes successfully
    exit 2:           dependencies are missing
                      not running as 'root'
                      illegal options are provided

NOTES
    Be warned that:

        1> The script runs badblocks in destructive mode, which erases any data
           on the disk.

           !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
           !!!!      ALL DATA ON THE DISK WILL BE LOST! BE CAREFUL!      !!!!
           !!!! DO NOT RUN THIS SCRIPT ON DISKS CONTAINING VALUABLE DATA !!!!
           !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

        2> Run times for large disks can be several days. Use tmux or screen
           to test multiple disks in parallel.

        3> Must be run as 'root'.

        4> The script has the following dependencies:

           smartmontools, available at https://www.smartmontools.org
           Uses: grep, awk, sed, sleep, badblocks

    Performs this test sequence:

        1> Run SMART short test
        2> Run badblocks
        3> Run SMART extended test

    The script sleeps after starting each SMART test, using a duration based on
    the polling interval reported by the disk, after which the script will poll
    the disk to verify the self-test has completed.

    Full SMART information is pulled after each SMART test. All output except
    for the sleep command is written to both stdout and the log.

    You should monitor the burn-in progress and watch for errors, particularly
    any errors reported by badblocks, or these SMART errors:

          5 Reallocated_Sector_Ct
        196 Reallocated_Event_Count
        197 Current_Pending_Sector
        198 Offline_Uncorrectable

    These indicate possible problems with the drive. You therefore may wish to
    abort the remaining tests and proceed with an RMA exchange for new drives or
    discard old ones. Please note that this list is not exhaustive.

    The script extracts the drive model and serial number and forms a log file-
    name of the form 'burnin-[model]_[serial number].log'.

    badblocks is invoked with a block size of 8192, the -wsv options, and the
    -o option to instruct it to write the list of bad blocks found (if any) to
    a file named 'burnin-[model]_[serial number].bb'.

    Before using the script on FreeBSD systems (including FreeNAS) you must
    first execute this sysctl command to alter the kernel's geometry debug
    flags. This allows badblocks to write to the entire disk:

        sysctl kern.geom.debugflags=0x10

    Also note that badblocks may issue the following warning under FreeBSD /
    FreeNAS, which can safely be ignored as it has no effect on testing:

        set_o_direct: Inappropiate ioctl for device

    Tested operating systems:

        FreeNAS 9.10.2 (FreeBSD 10.3-STABLE)
        FreeNAS 11.1-U7 (FreeBSD 11.1-STABLE)
        FreeNAS 11.2-U8 (FreeBSD 11.2-STABLE)
        Ubuntu Server 16.04.2 LTS
        CentOS 7.0
        Tiny Core Linux 11.1

    Tested disks:

        Intel
            DC S3700 SSD
            Model 320 Series SSD
        HGST
            Deskstar NAS (HDN724040ALE640)
            Ultrastar 7K4000 (HUS724020ALE640)
            Ultrastar He10
            Ultrastar He12
        Western Digital
            Black (WD6001FZWX)
            Gold
            Re (WD4000FYYZ)
        Seagate
            IronWolf NAS HDD 12TB (ST12000VN0008)

VERSIONS
    Written by Keith Nash, March 2017

    KN, 8 Apr 2017:
        Added minimum test durations because some devices don't return accurate
        values.
        Added code to clean up the log file, removing copyright notices, etc.
        No longer echo 'smartctl -t' output to log file as it imparts no useful
        information.
        Emit test results after tests instead of full 'smartctl -a' output.
        Emit full 'smartctl -x' output at the end of all testing.
        Minor changes to log output and formatting.

    KN, 12 May 2017:
        Added code to poll the disk and check for completed self-tests.

        As noted above, some disks don't report accurate values for the short
        and extended self-test intervals, sometimes by a significant amount.
        The original approach using 'fudge' factors wasn't reliable and the
        script would finish even though the SMART self-tests had not completed.
        The new polling code helps insure that this doesn't happen.

        Fixed code to work around annoying differences between sed's behavior
        on Linux and FreeBSD.

    KN, 8 Jun 2017
        Modified parsing of short and extended test durations to accommodate the
        values returned by larger drives; we needed to strip out the '(' and ')'
        characters surrounding the integer value in order to fetch it reliably.

    KN, 19 Aug 2020
        Changed DRY_RUN value so that dry runs are no longer the default
        setting.
        Changed badblocks call to exit immediately on first error.
        Set logging directory to current working directory using pwd command.
        Reduced default tests so that we run:
            1> Short SMART test
            2> badblocks
            3> Extended SMART test

    MS, 9 Sep 2020
        Add .editorconfig to streamlime editor behavior for developers.
        Remove dependencies on pcregrep and tr.
        Add documentation to functions and complex statements.
        Reduce code duplication, simplify and decouple code where possible.
        Improve portability and resiliency.
        Check availability of dependencies during runtim.
        Check for root privileges during runtime.
        Add option parsing, most notably (-h)elp and -f for non-dry-run mode.
        Add dry_run_wrapper() function.
        Add disk type detection to skip badblocks for non-mechanical drives.

    KN, 5 Oct 2020
        Added -x option to control the badblocks -e option, allowing extended testing.
        Added smartctl to the list of dependencies.
        Changed disk type detection so that we assume all drives are mechanical drives
        unless they explicitly return 'Solid State Drive' for Rotational Rate.
        Removed datestamp from every line of log output, only emitting it in log headers.
        Minor reformatting.

    KY, 30 May 2022
        Added -b & -c options to control respective badblocks options."

# badblocks default -e option is 1, stop testing if a single error occurs
BB_E_ARG=1

# badblocks default -b option is 1024, but we default to 8192. This allows overriding if desired.
BB_B_ARG=8192

# badblocks default -c option is 64, and this allows overriding
BB_C_ARG=64

# parse options
while getopts ':hefo:b:c:x' option; do
  case "${option}" in
    h)  echo "${USAGE}"
        exit
        ;;
    e)  echo "${USAGE}"
        echo "${USAGE_2}"
        exit
        ;;
    f)  readonly DRY_RUN=0
        ;;
    o)  LOG_DIR="${OPTARG}"
        ;;
    b)  BB_B_ARG="${OPTARG}"
        ;;
    c)  BB_C_ARG="${OPTARG}"
        ;;
    x)  BB_E_ARG=0
        ;;
    :)  printf 'Missing argument for -%s\n' "${OPTARG}" >&2
        echo "${USAGE}" >&2
        exit 2
        ;;
   \?)  printf 'Illegal option: -%s\n' "${OPTARG}" >&2
        echo "${USAGE}" >&2
        exit 2
        ;;
  esac
done
shift $(( OPTIND - 1 ))

if [ -z "$1" ]; then
  echo "ERROR: Missing disk argument" >&2
  echo "${USAGE}" >&2
  exit 2
fi

################################################################################
# CONSTANTS
################################################################################

readonly BB_E_ARG
readonly BB_B_ARG
readonly BB_C_ARG

# Drive to burn-in
DRIVE="$1"
# prepend /dev/ if necessary
if ! printf '%s' "${DRIVE}" | grep "/dev/\w*" > /dev/null 2>&1; then
  DRIVE="/dev/${DRIVE}"
fi
readonly DRIVE

if [ ! -e "$DRIVE" ]; then
  echo "ERROR: Disk does not exist: $DRIVE" >&2
  echo "${USAGE}" >&2
  exit 2
fi

# Set to working directory if -o <directory> wasn't provided
[ -z "${LOG_DIR}" ] && LOG_DIR="$(pwd)"
# Trim trailing slashes
LOG_DIR="$(printf '%s' "${LOG_DIR}" | awk '{gsub(/\/+$/, ""); printf $1}')"
readonly LOG_DIR

# System information
readonly HOSTNAME="$(hostname)"
readonly OS_FLAVOR="$(uname)"

# SMART static information
readonly SMART_INFO="$(smartctl --info "${DRIVE}")"
readonly SMART_CAPABILITIES="$(smartctl --capabilities "${DRIVE}")"

##################################################
# Get SMART information value.
# Globals:
#   SMART_INFO
# Arguments:
#   value identifier:
#     !!! Only TWO WORD indentifiers are supported !!!
#     !!! Querying e.g. "ATA Version is" will fail !!!
#     - Device Model
#     - Model Family
#     - Serial Number
# Outputs:
#   Write value to stdout.
##################################################
get_smart_info_value() {
  # $1=$2="";                     select all but first two columns
  # gsub(/^[ \t]+|[ \t]+$/, "");  replace leading and trailing whitespace
  # gsub(/ /, "_");               replace remaining spaces with underscores
  # printf $1                     print result without newline at the end
  printf '%s' "${SMART_INFO}" \
    | grep "$1" \
    | awk '{$1=$2=""; gsub(/^[ \t]+|[ \t]+$/, ""); gsub(/ /, "_"); printf $1}'
}

##################################################
# Get SMART recommended test duration, in minutes.
# Globals:
#   SMART_CAPABILITIES
# Arguments:
#   test type:
#     - Short
#     - Extended
#     - Conveyance
# Outputs:
#   Write duration to stdout.
##################################################
get_smart_test_duration() {
  # '/'"$1"' self-test routine/   match duration depending on test type arg
  # getline;                      jump to next line
  # gsub(/\(|\)/, "");            remove parantheses
  # printf $4                     print 4th column without newline at the end
  printf '%s' "${SMART_CAPABILITIES}" \
    | awk '/'"$1"' self-test routine/{getline; gsub(/\(|\)/, ""); printf $4}'
}

# Get disk model
DISK_MODEL="$(get_smart_info_value "Device Model")"
[ -z "${DISK_MODEL}" ] && DISK_MODEL="$(get_smart_info_value "Model Family")"
[ -z "${DISK_MODEL}" ] && DISK_MODEL="$(get_smart_info_value "Model Number")"
readonly DISK_MODEL

# Get disk type; unless we get 'Solid State Device' as return value, assume 
# we have a mechanical drive.
DISK_TYPE="$(get_smart_info_value "Rotation Rate")"
if printf '%s' "${DISK_TYPE}" | grep -i "solid_state_device" > /dev/null 2>&1; then
  DISK_TYPE="SSD"
fi
readonly DISK_TYPE

# Get disk serial number
readonly SERIAL_NUMBER="$(get_smart_info_value "Serial Number")"

# SMART short test duration
readonly SHORT_TEST_MINUTES="$(get_smart_test_duration "Short")"
readonly SHORT_TEST_SECONDS="$(( SHORT_TEST_MINUTES * 60))"

# SMART extended test duration
readonly EXTENDED_TEST_MINUTES="$(get_smart_test_duration "Extended")"
readonly EXTENDED_TEST_SECONDS="$(( EXTENDED_TEST_MINUTES * 60 ))"

# Maximum duration the completion status is polled
readonly POLL_TIMEOUT_HOURS=4
readonly POLL_TIMEOUT_SECONDS="$(( POLL_TIMEOUT_HOURS * 60 * 60))"

# Sleep interval between completion status polls
readonly POLL_INTERVAL_SECONDS=15

# Form log file names
readonly LOG_FILE="${LOG_DIR}/burnin-${DISK_MODEL}_${SERIAL_NUMBER}.log"
readonly BB_File="${LOG_DIR}/burnin-${DISK_MODEL}_${SERIAL_NUMBER}.bb"

################################################################################
# FUNCTIONS
################################################################################

##################################################
# Log informational message.
# Globals:
#   LOG_FILE
# Arguments:
#   Message to log.
# Outputs:
#   Write message to stdout and log file.
##################################################
log_info() {
#  now="$(date +"%F %T %Z")"
#  printf "%s\n" "[${now}] $1" | tee -a "${LOG_FILE}"
  printf "%s\n" "$1" | tee -a "${LOG_FILE}"
}

##################################################
# Log emphasized header message.
# Arguments:
#   Message to log.
##################################################
log_header() {
  log_info "+-----------------------------------------------------------------------------"
  log_info "+ $1: $(date)"              
  log_info "+-----------------------------------------------------------------------------"
}

##################################################
# Ensure log directory exists and remove old logs.
# Globals:
#   LOG_DIR
#   LOG_FILE
# Arguments:
#   None
##################################################
init_log() {
  mkdir -p -- "${LOG_DIR}" || exit 2
  [ -e "${LOG_FILE}" ] && rm -- "${LOG_FILE}"
}

##################################################
# Remove redundant messages from log.
# Globals:
#   LOG_FILE
#   OS_FLAVOR
# Arguments:
#   None
##################################################
cleanup_log() {
  if [ "${OS_FLAVOR}" = "Linux" ]; then
    sed -i -e '/Copyright/d' "${LOG_FILE}"
    sed -i -e '/=== START OF READ/d' "${LOG_FILE}"
    sed -i -e '/SMART Attributes Data/d' "${LOG_FILE}"
    sed -i -e '/Vendor Specific SMART/d' "${LOG_FILE}"
    sed -i -e '/SMART Error Log Version/d' "${LOG_FILE}"
  fi

  if [ "${OS_FLAVOR}" = "FreeBSD" ]; then
    sed -i '' -e '/Copyright/d' "${LOG_FILE}"
    sed -i '' -e '/=== START OF READ/d' "${LOG_FILE}"
    sed -i '' -e '/SMART Attributes Data/d' "${LOG_FILE}"
    sed -i '' -e '/Vendor Specific SMART/d' "${LOG_FILE}"
    sed -i '' -e '/SMART Error Log Version/d' "${LOG_FILE}"
  fi
}

##################################################
# Log command in dry-run mode, run command otherwise.
# Globals:
#   DRY_RUN
# Arguments:
#   Command to run.
##################################################
dry_run_wrapper() {
  if [ -z "$DRY_RUN" ]; then
      log_info "DRY RUN: $*"
      return 0
  fi
  eval "$@"
}

##################################################
# Log runtime information about current burn-in.
# Globals:
#   HOSTNAME
#   OS_FLAVOR
#   DRIVE
#   DISK_TYPE
#   DISK_MODEL
#   SERIAL_NUMBER
#   SHORT_TEST_MINUTES
#   SHORT_TEST_SECONDS
#   EXTENDED_TEST_MINUTES
#   EXTENDED_TEST_SECONDS
#   LOG_FILE
#   BB_File
# Arguments:
#   None
##################################################
log_runtime_info() {
  log_info "Host:                   ${HOSTNAME}"
  log_info "OS:                     ${OS_FLAVOR}"
  log_info "Drive:                  ${DRIVE}"
  log_info "Disk Type:              ${DISK_TYPE}"
  log_info "Drive Model:            ${DISK_MODEL}"
  log_info "Serial Number:          ${SERIAL_NUMBER}"
  log_info "Short test duration:    ${SHORT_TEST_MINUTES} minutes"
  log_info "                        ${SHORT_TEST_SECONDS} seconds"
  log_info "Extended test duration: ${EXTENDED_TEST_MINUTES} minutes"
  log_info "                        ${EXTENDED_TEST_SECONDS} seconds"
  log_info "Log file:               ${LOG_FILE}"
  log_info "Bad blocks file:        ${BB_File}"
}

##################################################
# Poll repeatedly whether SMART self-test has completed.
# Globals:
#   DRIVE
#   POLL_INTERVAL_SECONDS
#   POLL_TIMEOUT_SECONDS
# Arguments:
#   None
# Returns:
#   0 if success or failure.
#   1 if timeout threshold exceeded.
##################################################
poll_selftest_complete() {
  l_poll_duration_seconds=0
  while [ "${l_poll_duration_seconds}" -lt "${POLL_TIMEOUT_SECONDS}" ]; do
    smartctl --all "${DRIVE}" \
      | grep -i "The previous self-test routine completed" > /dev/null 2>&1
    l_status="$?"
    if [ "${l_status}" -eq 0 ]; then
      log_info "SMART self-test succeeded"
      return 0
    fi
    smartctl --all "${DRIVE}" \
      | grep -i "of the test failed\." > /dev/null 2>&1
    l_status="$?"
    if [ "${l_status}" -eq 0 ]; then
      log_info "SMART self-test failed"
      return 0
    fi
    sleep "${POLL_INTERVAL_SECONDS}"
    l_poll_duration_seconds="$(( l_poll_duration_seconds + POLL_INTERVAL_SECONDS ))"
  done
  log_info "SMART self-test timeout threshold exceeded"
  return 1
}

##################################################
# Run SMART test and log results.
# Globals:
#   DRIVE
#   LOG_FILE
# Arguments:
#   Test type:
#     - short
#     - long
#   Test duration in seconds.
##################################################
run_smart_test() {
  log_header "Running SMART $1 test"
  dry_run_wrapper "smartctl --test=\"$1\" \"${DRIVE}\""
  log_info "SMART $1 test started, awaiting completion for $2 seconds ..."
  dry_run_wrapper "sleep \"$2\""
  dry_run_wrapper "poll_selftest_complete"
  dry_run_wrapper "smartctl --log=selftest \"${DRIVE}\" | tee -a \"${LOG_FILE}\""
  log_info "Finished SMART $1 test"
}

##################################################
# Run badblocks test.
# !!! ALL DATA ON THE DISK WILL BE LOST !!!
# Globals:
#   BB_File
#   DISK_TYPE
#   DRIVE
# Arguments:
#   None
##################################################
run_badblocks_test() {
  log_header "Running badblocks test"
  if [ "${DISK_TYPE}" != "SSD" ]; then
    dry_run_wrapper "badblocks -b ${BB_B_ARG} -wsv -c ${BB_C_ARG} -e ${BB_E_ARG} -o \"${BB_File}\" \"${DRIVE}\""
  else
    log_info "SKIPPED: badblocks for ${DISK_TYPE} device"
  fi
  log_info "Finished badblocks test"
}

##################################################
# Log extensive SMART and non-SMART drive information.
# Globals:
#   DRIVE
#   LOG_FILE
# Arguments:
#   None
##################################################
log_full_device_info() {
  log_header "Drive information"
  dry_run_wrapper "smartctl --xall --vendorattribute=7,hex48 \"${DRIVE}\" | tee -a \"${LOG_FILE}\""
}

##################################################
# Main function of script.
# Globals:
#   SHORT_TEST_SECONDS
#   EXTENDED_TEST_SECONDS
# Arguments:
#   None
##################################################
main() {
  init_log
  log_header "Started burn-in"

  log_runtime_info

  # test sequence
  run_smart_test "short" "${SHORT_TEST_SECONDS}"
  run_badblocks_test
  run_smart_test "long" "${EXTENDED_TEST_SECONDS}"

  log_full_device_info

  log_header "Finished burn-in"
  cleanup_log
}

# Entrypoint
main