diff --git a/Documentation/Flashing/Pinecil V2.md b/Documentation/Flashing/Pinecil V2.md
index d75fd2895a..ac74a0d97d 100644
--- a/Documentation/Flashing/Pinecil V2.md	
+++ b/Documentation/Flashing/Pinecil V2.md	
@@ -29,7 +29,7 @@ Then this works the same as a production release (use the correct file).
 - The MCU in Pinecil V2 is Bouffalo BL706 and does _not_ use usb-dfu for flashing as the previous Pinecil V1 MCU did.
 - See the Pinecil Wiki page [here](https://wiki.pine64.org/wiki/Pinecil#Firmware_&_Updates) for instructions.
 - The V2 uses the [BLISP flasher](https://github.com/pine64/blisp) to upload the firmware to the MCU.
-- The [Pinecil Wiki] (https://wiki.pine64.org/wiki/Pinecil) is a great resource for all things Pinecil.
+- The [Pinecil Wiki](https://wiki.pine64.org/wiki/Pinecil) is a great resource for all things Pinecil.
 - Community chat: if there are issues updating, then join the Pine64 > Pinecil channel [here](https://wiki.pine64.org/wiki/Pinecil#Live_Community_Chat). There are knowledgeable members in Discord/Telegram/Matrix. Discord has a bridge bot connection to Telegram and Matrix so that all pine64 volunteers/members can see advice for Pinecil and related items or just get tips on which power supply to purchase.
 - One advantage of Pinecil is that you cannot permanently damage it doing a firmware update (because BIN is in ROM); an update could render Pinecil temporarily inoperable if you flash an invalid firmware. But no worries, simply re-flashing with a working firmware copy will fix everything.
 - USB-C cable is required to do an update. Generally, all USB controllers work, but some hubs have issues, so it is preferred to avoid USB hubs for updates.
diff --git a/Documentation/GettingStarted.md b/Documentation/GettingStarted.md
index 3843d74681..7793b106cb 100644
--- a/Documentation/GettingStarted.md
+++ b/Documentation/GettingStarted.md
@@ -28,7 +28,7 @@ Note that this may be drawn mirrored depending on the orientation of your screen
 
 The soldering iron symbol on the screen will appear near the tip. This is here to indicate that pressing the button closest to the front of the iron will enter soldering mode.
 
-And naturally, the spanner like icon represents that pressing the button near the rear of the soldering iron will enter the settings menu.
+And naturally, the slider controls icon (or spanner icon in older versions) represents that pressing the button near the rear of the soldering iron will enter the settings menu.
 
 In the settings, you can turn on a detailed idle screen instead. The buttons still function the same, however, the image will be swapped for a text telling you the current status of the iron with extra details.