diff --git a/Documentation/Flashing/MHP30.md b/Documentation/Flashing/MHP30.md index 68a10184c3..afc13313bb 100644 --- a/Documentation/Flashing/MHP30.md +++ b/Documentation/Flashing/MHP30.md @@ -26,9 +26,9 @@ Then this works the same as a production release (use the correct file). # MHP30 -This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called MHP30.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `MHP30_{Language-Code}.hex`. +This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) ([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called MHP30.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `MHP30_{Language-Code}.hex`. -Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware). +Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under [Mac](#mac), and can be made to work under [Linux](#linux) _sometimes_ (look for details below). 1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer. 2. The unit will appear as a USB drive. (Screen will say `DFU` on it.) diff --git a/Documentation/Flashing/TS100.md b/Documentation/Flashing/TS100.md index 446bc475e2..0d5ff257eb 100644 --- a/Documentation/Flashing/TS100.md +++ b/Documentation/Flashing/TS100.md @@ -26,9 +26,9 @@ Then this works the same as a production release (use the correct file). # TS100 -This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS100.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS100_{Language-Code}.hex`. +This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) ([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS100.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS100_{Language-Code}.hex`. -Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/IronOS/wiki/Upgrading-Firmware). +Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under [Mac](#mac), and can be made to work under [Linux](#linux) _sometimes_ (look for details below). 1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer. 2. The unit will appear as a USB drive. (Screen will say `DFU` on it.) diff --git a/Documentation/Flashing/TS80(P).md b/Documentation/Flashing/TS80(P).md index efdbf7d299..739f4da474 100644 --- a/Documentation/Flashing/TS80(P).md +++ b/Documentation/Flashing/TS80(P).md @@ -26,9 +26,9 @@ Then this works the same as a production release (use the correct file). # TS80 / TS80P -This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS80.zip or TS80P.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS80_{Language-Code}.hex`/`TS80P_{Language-Code}.hex`. +This is completely safe, but if it goes wrong just put the corresponding `.hex` file from [the official website](https://e-design.com.cn/en/NewsDetail/4203645.html) ([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)) onto the unit and you're back to the old firmware. Downloads for the `.hex` files to flash are available on the [releases page.](https://github.com/Ralim/IronOS/releases) The file you want is called TS80.zip or TS80P.zip. Inside the zip file (make sure to extract the file before flashing with it) will be a file called `TS80_{Language-Code}.hex`/`TS80P_{Language-Code}.hex`. -Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under Mac, and can be made to work under Linux _sometimes_. Details over on the [wiki page](https://github.com/Ralim/TS80/wiki/Upgrading-Firmware). +Officially the bootloader on the devices only works under Windows (use the built-in File Explorer, as alternative file managers or copy handlers like Teracopy will fail). However, users have reported that it does work under [Mac](#mac), and can be made to work under [Linux](#linux) _sometimes_ (look for details below). 1. Hold the button closest to the tip (MHP30 the left button on the back), and plug in the USB to the computer. 2. The unit will appear as a USB drive. (Screen will say `DFU` on it.) diff --git a/Documentation/Hardware.md b/Documentation/Hardware.md index 06ce9ac99b..55f5251294 100644 --- a/Documentation/Hardware.md +++ b/Documentation/Hardware.md @@ -8,7 +8,7 @@ TS100\* is a neat soldering iron: - can run from 9-25V DC; - provides a power range that is determined by the input voltage; - voltages below 12V don't overly work well for any substantial mass; -- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html). +- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html)([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)). ![](https://brushlesswhoop.com/images/ts100-og.jpg) @@ -19,7 +19,7 @@ TS80\* is a successor to TS100: - uses _Quick Charge 3.0_ / _QC3_ capable charger only (18W max); - doesn't support PD as it is not designed on the hardware level; -- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html). +- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html)([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)). ![](https://core-electronics.com.au/media/catalog/product/4/2/4244-01.jpg) @@ -30,7 +30,7 @@ TS80P\* is a successor to TS80: - supports _Quick Charge 3.0_ (_QC3_: 9V/3A, 18W max); - supports _Power Delivery_ (_PD_: 9V/3A & 12V/3A, 30W max)\*\*; -- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html). +- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html)([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)). \*\*: use valid PD device that supports 12V/3A as power source to get full 30W potential, otherwise the iron will fall back to 9V/18W power mode. @@ -45,7 +45,7 @@ MHP30 is a **M**ini **H**ot **P**late: - USB-PD is using the FUSB302; - the hardware I2C bus on PB6/7 is used for the MSA301 and FUSB302; - the OLED is the same SSD1306 as everything else, but it’s on a bit-banged bus; -- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html). +- the original firmware can be found [here](https://e-design.com.cn/en/NewsDetail/4203645.html)([mirror backup](https://github.com/Ralim/IronOS-Meta/tree/main/Firmware/Miniware)). ### Pinecil