diff --git a/Core/Startup/startup_stm32f103t8ux.s b/Core/Startup/startup_stm32f103t8ux.s deleted file mode 100644 index 8f5e8de..0000000 --- a/Core/Startup/startup_stm32f103t8ux.s +++ /dev/null @@ -1,365 +0,0 @@ -/** - *************** (C) COPYRIGHT 2017 STMicroelectronics ************************ - * @file startup_stm32f103xb.s - * @author MCD Application Team - * @brief STM32F103xB Devices vector table for Atollic toolchain. - * This module performs: - * - Set the initial SP - * - Set the initial PC == Reset_Handler, - * - Set the vector table entries with the exceptions ISR address - * - Configure the clock system - * - Branches to main in the C library (which eventually - * calls main()). - * After Reset the Cortex-M3 processor is in Thread mode, - * priority is Privileged, and the Stack is set to Main. - ****************************************************************************** - * @attention - * - *

© Copyright (c) 2017 STMicroelectronics. - * All rights reserved.

- * - * This software component is licensed by ST under BSD 3-Clause license, - * the "License"; You may not use this file except in compliance with the - * License. You may obtain a copy of the License at: - * opensource.org/licenses/BSD-3-Clause - * - ****************************************************************************** - */ - - .syntax unified - .cpu cortex-m3 - .fpu softvfp - .thumb - -.global g_pfnVectors -.global Default_Handler - -/* start address for the initialization values of the .data section. -defined in linker script */ -.word _sidata -/* start address for the .data section. defined in linker script */ -.word _sdata -/* end address for the .data section. defined in linker script */ -.word _edata -/* start address for the .bss section. defined in linker script */ -.word _sbss -/* end address for the .bss section. defined in linker script */ -.word _ebss - -.equ BootRAM, 0xF108F85F -/** - * @brief This is the code that gets called when the processor first - * starts execution following a reset event. Only the absolutely - * necessary set is performed, after which the application - * supplied main() routine is called. - * @param None - * @retval : None -*/ - - .section .text.Reset_Handler - .weak Reset_Handler - .type Reset_Handler, %function -Reset_Handler: - -/* Copy the data segment initializers from flash to SRAM */ - ldr r0, =_sdata - ldr r1, =_edata - ldr r2, =_sidata - movs r3, #0 - b LoopCopyDataInit - -CopyDataInit: - ldr r4, [r2, r3] - str r4, [r0, r3] - adds r3, r3, #4 - -LoopCopyDataInit: - adds r4, r0, r3 - cmp r4, r1 - bcc CopyDataInit - -/* Zero fill the bss segment. */ - ldr r2, =_sbss - ldr r4, =_ebss - movs r3, #0 - b LoopFillZerobss - -FillZerobss: - str r3, [r2] - adds r2, r2, #4 - -LoopFillZerobss: - cmp r2, r4 - bcc FillZerobss - -/* Call the clock system intitialization function.*/ - bl SystemInit -/* Call static constructors */ - bl __libc_init_array -/* Call the application's entry point.*/ - bl main - bx lr -.size Reset_Handler, .-Reset_Handler - -/** - * @brief This is the code that gets called when the processor receives an - * unexpected interrupt. This simply enters an infinite loop, preserving - * the system state for examination by a debugger. - * - * @param None - * @retval : None -*/ - .section .text.Default_Handler,"ax",%progbits -Default_Handler: -Infinite_Loop: - b Infinite_Loop - .size Default_Handler, .-Default_Handler -/****************************************************************************** -* -* The minimal vector table for a Cortex M3. Note that the proper constructs -* must be placed on this to ensure that it ends up at physical address -* 0x0000.0000. -* -******************************************************************************/ - .section .isr_vector,"a",%progbits - .type g_pfnVectors, %object - .size g_pfnVectors, .-g_pfnVectors - - -g_pfnVectors: - - .word _estack - .word Reset_Handler - .word NMI_Handler - .word HardFault_Handler - .word MemManage_Handler - .word BusFault_Handler - .word UsageFault_Handler - .word 0 - .word 0 - .word 0 - .word 0 - .word SVC_Handler - .word DebugMon_Handler - .word 0 - .word PendSV_Handler - .word SysTick_Handler - .word WWDG_IRQHandler - .word PVD_IRQHandler - .word TAMPER_IRQHandler - .word RTC_IRQHandler - .word FLASH_IRQHandler - .word RCC_IRQHandler - .word EXTI0_IRQHandler - .word EXTI1_IRQHandler - .word EXTI2_IRQHandler - .word EXTI3_IRQHandler - .word EXTI4_IRQHandler - .word DMA1_Channel1_IRQHandler - .word DMA1_Channel2_IRQHandler - .word DMA1_Channel3_IRQHandler - .word DMA1_Channel4_IRQHandler - .word DMA1_Channel5_IRQHandler - .word DMA1_Channel6_IRQHandler - .word DMA1_Channel7_IRQHandler - .word ADC1_2_IRQHandler - .word USB_HP_CAN1_TX_IRQHandler - .word USB_LP_CAN1_RX0_IRQHandler - .word CAN1_RX1_IRQHandler - .word CAN1_SCE_IRQHandler - .word EXTI9_5_IRQHandler - .word TIM1_BRK_IRQHandler - .word TIM1_UP_IRQHandler - .word TIM1_TRG_COM_IRQHandler - .word TIM1_CC_IRQHandler - .word TIM2_IRQHandler - .word TIM3_IRQHandler - .word TIM4_IRQHandler - .word I2C1_EV_IRQHandler - .word I2C1_ER_IRQHandler - .word I2C2_EV_IRQHandler - .word I2C2_ER_IRQHandler - .word SPI1_IRQHandler - .word SPI2_IRQHandler - .word USART1_IRQHandler - .word USART2_IRQHandler - .word USART3_IRQHandler - .word EXTI15_10_IRQHandler - .word RTC_Alarm_IRQHandler - .word USBWakeUp_IRQHandler - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word 0 - .word BootRAM /* @0x108. This is for boot in RAM mode for - STM32F10x Medium Density devices. */ - -/******************************************************************************* -* -* Provide weak aliases for each Exception handler to the Default_Handler. -* As they are weak aliases, any function with the same name will override -* this definition. -* -*******************************************************************************/ - - .weak NMI_Handler - .thumb_set NMI_Handler,Default_Handler - - .weak HardFault_Handler - .thumb_set HardFault_Handler,Default_Handler - - .weak MemManage_Handler - .thumb_set MemManage_Handler,Default_Handler - - .weak BusFault_Handler - .thumb_set BusFault_Handler,Default_Handler - - .weak UsageFault_Handler - .thumb_set UsageFault_Handler,Default_Handler - - .weak SVC_Handler - .thumb_set SVC_Handler,Default_Handler - - .weak DebugMon_Handler - .thumb_set DebugMon_Handler,Default_Handler - - .weak PendSV_Handler - .thumb_set PendSV_Handler,Default_Handler - - .weak SysTick_Handler - .thumb_set SysTick_Handler,Default_Handler - - .weak WWDG_IRQHandler - .thumb_set WWDG_IRQHandler,Default_Handler - - .weak PVD_IRQHandler - .thumb_set PVD_IRQHandler,Default_Handler - - .weak TAMPER_IRQHandler - .thumb_set TAMPER_IRQHandler,Default_Handler - - .weak RTC_IRQHandler - .thumb_set RTC_IRQHandler,Default_Handler - - .weak FLASH_IRQHandler - .thumb_set FLASH_IRQHandler,Default_Handler - - .weak RCC_IRQHandler - .thumb_set RCC_IRQHandler,Default_Handler - - .weak EXTI0_IRQHandler - .thumb_set EXTI0_IRQHandler,Default_Handler - - .weak EXTI1_IRQHandler - .thumb_set EXTI1_IRQHandler,Default_Handler - - .weak EXTI2_IRQHandler - .thumb_set EXTI2_IRQHandler,Default_Handler - - .weak EXTI3_IRQHandler - .thumb_set EXTI3_IRQHandler,Default_Handler - - .weak EXTI4_IRQHandler - .thumb_set EXTI4_IRQHandler,Default_Handler - - .weak DMA1_Channel1_IRQHandler - .thumb_set DMA1_Channel1_IRQHandler,Default_Handler - - .weak DMA1_Channel2_IRQHandler - .thumb_set DMA1_Channel2_IRQHandler,Default_Handler - - .weak DMA1_Channel3_IRQHandler - .thumb_set DMA1_Channel3_IRQHandler,Default_Handler - - .weak DMA1_Channel4_IRQHandler - .thumb_set DMA1_Channel4_IRQHandler,Default_Handler - - .weak DMA1_Channel5_IRQHandler - .thumb_set DMA1_Channel5_IRQHandler,Default_Handler - - .weak DMA1_Channel6_IRQHandler - .thumb_set DMA1_Channel6_IRQHandler,Default_Handler - - .weak DMA1_Channel7_IRQHandler - .thumb_set DMA1_Channel7_IRQHandler,Default_Handler - - .weak ADC1_2_IRQHandler - .thumb_set ADC1_2_IRQHandler,Default_Handler - - .weak USB_HP_CAN1_TX_IRQHandler - .thumb_set USB_HP_CAN1_TX_IRQHandler,Default_Handler - - .weak USB_LP_CAN1_RX0_IRQHandler - .thumb_set USB_LP_CAN1_RX0_IRQHandler,Default_Handler - - .weak CAN1_RX1_IRQHandler - .thumb_set CAN1_RX1_IRQHandler,Default_Handler - - .weak CAN1_SCE_IRQHandler - .thumb_set CAN1_SCE_IRQHandler,Default_Handler - - .weak EXTI9_5_IRQHandler - .thumb_set EXTI9_5_IRQHandler,Default_Handler - - .weak TIM1_BRK_IRQHandler - .thumb_set TIM1_BRK_IRQHandler,Default_Handler - - .weak TIM1_UP_IRQHandler - .thumb_set TIM1_UP_IRQHandler,Default_Handler - - .weak TIM1_TRG_COM_IRQHandler - .thumb_set TIM1_TRG_COM_IRQHandler,Default_Handler - - .weak TIM1_CC_IRQHandler - .thumb_set TIM1_CC_IRQHandler,Default_Handler - - .weak TIM2_IRQHandler - .thumb_set TIM2_IRQHandler,Default_Handler - - .weak TIM3_IRQHandler - .thumb_set TIM3_IRQHandler,Default_Handler - - .weak TIM4_IRQHandler - .thumb_set TIM4_IRQHandler,Default_Handler - - .weak I2C1_EV_IRQHandler - .thumb_set I2C1_EV_IRQHandler,Default_Handler - - .weak I2C1_ER_IRQHandler - .thumb_set I2C1_ER_IRQHandler,Default_Handler - - .weak I2C2_EV_IRQHandler - .thumb_set I2C2_EV_IRQHandler,Default_Handler - - .weak I2C2_ER_IRQHandler - .thumb_set I2C2_ER_IRQHandler,Default_Handler - - .weak SPI1_IRQHandler - .thumb_set SPI1_IRQHandler,Default_Handler - - .weak SPI2_IRQHandler - .thumb_set SPI2_IRQHandler,Default_Handler - - .weak USART1_IRQHandler - .thumb_set USART1_IRQHandler,Default_Handler - - .weak USART2_IRQHandler - .thumb_set USART2_IRQHandler,Default_Handler - - .weak USART3_IRQHandler - .thumb_set USART3_IRQHandler,Default_Handler - - .weak EXTI15_10_IRQHandler - .thumb_set EXTI15_10_IRQHandler,Default_Handler - - .weak RTC_Alarm_IRQHandler - .thumb_set RTC_Alarm_IRQHandler,Default_Handler - - .weak USBWakeUp_IRQHandler - .thumb_set USBWakeUp_IRQHandler,Default_Handler - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ -