Initial import of SLIP networking module

Makefile.dep

@@ -34,6 +34,14 @@ ifneq (,$(filter sixlowpan,$(USEMODULE)))
 	USEMODULE += vtimer
 endif
 
+ifneq (,$(filter slip,$(USEMODULE)))
+    USEMODULE += lib
+    ifeq (,$(filter-out $(BOARD),arduino-due iot-lab_M3 pca10000 pca10005 stm32f0discovery stm32f3discovery stm32f4discovery))
+        USEMODULE += posix
+        USEMODULE += uart0
+    endif
+endif
+
 ifneq (,$(filter posix,$(USEMODULE)))
 	USEMODULE += uart0
 	USEMODULE += timex

drivers/include/net_dev/base.h

@@ -86,6 +86,7 @@ typedef enum {
     NET_DEV_PROTO_UDP            = 0x0006,   /**< UDP */
     NET_DEV_PROTO_TCP            = 0x0007,   /**< TCP */
     NET_DEV_PROTO_CCNL           = 0x0008,   /**< CCN lite */
+    NET_DEV_PROTO_SLIP           = 0x0009,   /**< SLIP stream */
 } net_dev_proto_t;
 
 /**

sys/Makefile

@@ -52,6 +52,9 @@ endif
 ifneq (,$(filter basic_mac,$(USEMODULE)))
     DIRS += net/link_layer/basic_mac
 endif
+ifneq (,$(filter slip,$(USEMODULE)))
+    DIRS += net/link_layer/slip
+endif
 ifneq (,$(filter destiny,$(USEMODULE)))
     DIRS += net/transport_layer/destiny
 endif

sys/net/include/slip.h

@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2014 Martin Lenders
+ *
+ * This file is subject to the terms and conditions of the GNU Lesser General
+ * Public License. See the file LICENSE in the top level directory for more
+ * details.
+ */
+
+/**
+ * @defgroup    slip SLIP transceiver
+ * @ingroup     net
+ * @{
+ *
+ * @file        slip.h
+ * @brief       Provides a SLIP interface over UART.
+ * @see         <a href="https://www.ietf.org/rfc/rfc1055">RFC 1055</a>
+ *
+ * @author      Martine Lenders <[email protected]>
+ *
+ * @}
+ */
+
+#ifndef __SLIP_H_
+#define __SLIP_H_
+
+#include <stdint.h>
+
+#include "periph/uart.h"
+#include "basic_net.h"
+
+#include "ipv6.h"
+
+#if !UART_NUMOF
+/**
+ * @brief   Guard type in the case that the board does not implement the new
+ *          driver model
+ */
+typedef uint8_t uart_t;
+#endif
+
+/**
+ * Initializes a new @ref slip control thread for UART device *uart*. If
+ * the board does not support the uart_t type it falls back to using
+ * board_uart0.h
+ *
+ * @param[in] uart      The (uninitialized) UART device, ignored if UART_NUMOF == 0 or not defined
+ * @param[in] baudrate  Symbole rate for the UART device
+ * @param[in] in_buf    Ringbuffer to store the incoming data from the UART in.
+ *                      Must hold at least L3  packet.
+ *
+ * @return The PID of the @ref slip control thread
+ */
+kernel_pid_t slip_init(uart_t uart, uint32_t baudrate, ringbuffer_t *in_buf);
+
+/**
+ * @brief   Send a layer 3 packet over the UART device
+ *
+ * @param[in] pid               The PID for the @ref slip control thread
+ * @param[in] upper_layer_hdrs  All upper layer headers including layer 3.
+ * @param[in] data              Data (*without* all upper layer headers) to send
+ *                              over the UART device
+ * @param[in] data_len          Length of *data*
+ */
+static inline int slip_send_l3_packet(kernel_pid_t pid, net_dev_hlist_t *upper_layer_hdrs,
+                                      void *data, size_t data_len)
+{
+    return basic_net_send_data2(pid, upper_layer_hdrs, NULL, 0, data, data_len);
+}
+
+#endif /* __SLIP_H_ */

sys/net/link_layer/slip/Makefile

@@ -0,0 +1,2 @@
+INCLUDES += -I$(RIOTBASE)/sys/net/include
+include $(RIOTBASE)/Makefile.base

sys/net/link_layer/slip/README.md

@@ -0,0 +1,17 @@
+SLIP network interface
+======================
+
+This module provides access to the [http://tools.ietf.org/html/rfc1055](Serial Line Internet Protocol (SLIP)).
+It allows you to send IP and IPv6 packages over the U(S)ART. For this you
+have to initialize your serial device as a network device. In Linux (and Mac OS X) [http://playground.arduino.cc/Code/SerialIP#Connecting_Linux](this is easy):
+
+```bash
+sudo modprobe slip  # you do not need this line in Mac OS X
+sudo slattach -s <your UART's baudrate, typically 115200> -p slip <your serial device, typically /dev/ttyUSB0>
+sudo ifconfig sl0 mtu 1280  # or smaller, for e.g. MSP-430 boards
+sudo ifconfig sl0 add fe80::/64
+sudo ifconfig sl0 add abcd::/64 # replace with an IPv6 prefix of your choice
+sudo ifconfig sl0 up
+```
+
+If your RIOT board is configured as an IPv6 router, the rest should happen automatically.