diff --git a/doc/v2/dev/write_docs_cn.rst b/doc/v2/dev/write_docs_cn.rst
index 23615f8830e99..4231f2bb5cd80 100644
--- a/doc/v2/dev/write_docs_cn.rst
+++ b/doc/v2/dev/write_docs_cn.rst
@@ -65,39 +65,55 @@ PaddlePaddle.org工具可以配合Docker使用，需要在系统里先安装好D
 不使用PaddlePaddle.org工具
 --------------------------
 
-使用Docker构建PaddlePaddle的文档，需要在系统里先安装好Docker工具包。Docker安装请参考 `Docker的官网 <https://docs.docker.com/>`_ 。安装好Docker之后可以使用源码目录下的脚本构建文档，即
+使用Docker构建PaddlePaddle的文档，需要在系统里先安装好Docker工具包。Docker安装请参考 `Docker的官网 <https://docs.docker.com/>`_ 。该方法与 `从源码编译PaddlePaddle <http://paddlepaddle.org/docs/develop/documentation/zh/build_and_install/build_from_source_cn.html>`_ 相似，通过从源码中构建可用于编译PaddlePaddle文档的Docker镜像并运行，在进入Docker容器后使用源码中的脚本构建PaddlePaddle文档，具体步骤如下：
 
-[TBD]
+.. code-block:: bash
+
+   git clone https://github.com/PaddlePaddle/Paddle.git
+   cd Paddle
+
+   # 从源码中构建可用于编译PaddlePaddle文档的Docker镜像
+   docker build -t paddle:dev .
+   docker run -it -v $PWD:/paddle -e "WITH_GPU=OFF" -e "WITH_TESTING=OFF" -e "WITH_DOC=ON" paddle:dev /bin/bash
+
+   # 进入Docker容器后使用build.sh脚本构建PaddlePaddle文档
+   bash -x /paddle/paddle/scripts/docker/build.sh
+
+注：上述命令把当前目录（源码根目录）映射为 container 里的 :code:`/paddle` 目录。
+
+编译完成后，会产生 ``doc/v2`` 和 ``doc/fluid`` 两个目录，在这两个目录下分别都生成 ``cn/html/`` 、 ``en/html`` 、 ``api/en/html`` 共三个子目录，分别进入这些目录下，执行以下命令：
+
+.. code-block:: bash
+
+   python -m SimpleHTTPServer 8088
+
+在浏览器中输入 http://localhost:8088 就可以看到编译生成的 ``v2`` 和 ``fluid`` 两种版本的中/英文的文档页面和英文的API页面。
 
 如果不想使用Docker，也可以使用以下命令直接构建PaddlePaddle文档，即
 
 .. code-block:: bash
 
-   mkdir paddle
-   cd paddle
    git clone https://github.com/PaddlePaddle/Paddle.git
+   cd Paddle
    mkdir -p build
    cd build
    cmake .. -DCMAKE_BUILD_TYPE=Release -DWITH_GPU=OFF -DWITH_MKL=OFF -DWITH_DOC=ON
 
    # 如果只需要构建使用文档，则执行以下命令
-   make -j $processors gen_proto_py
-   make -j $processors paddle_docs paddle_docs_cn
+   make -j $processors paddle_docs
 
    # 如果只需要构建API，则执行以下命令
-   make -j $processors gen_proto_py framework_py_proto
-   make -j $processors copy_paddle_pybind
-   make -j $processors paddle_api_docs
+   make -j $processors paddle_apis
 
 其中$processors代表启动和CPU核一样多的进程来并行编译，可以根据本机的CPU核数设置相应的值。
 
-编译完成后，进入 ``doc/v2`` 目录，如果选择构建文档则会在该目录下生成 ``cn/html/`` 、 ``en/html`` 两个子目录，选择构建API则会生成 ``api/en/html`` 目录，分别进入这些目录下，执行以下命令：
+编译完成后，同样会产生 ``doc/v2`` 和 ``doc/fluid`` 两个目录，如果选择构建文档则会在这两个目录下分别都生成 ``cn/html/`` 、 ``en/html`` 两个子目录，选择构建API则会在这两个目录下分别生成 ``api/en/html`` 目录，分别进入这些子目录下，执行以下命令：
 
 .. code-block:: bash
 
    python -m SimpleHTTPServer 8088
 
-在浏览器中输入 http://localhost:8088 就可以看到编译生成的中/英文的文档页面和英文的API页面,下图为生成的英文文档首页示例。注意，示例中由于使用了sphinx的原始主题，所以页面的风格与官网并不一致，但这并不影响开发者进行调试。
+在浏览器中输入 http://localhost:8088 就可以看到编译生成的 ``v2`` 和 ``fluid`` 两种版本的中/英文的文档页面和英文的API页面。下图为生成的 ``v2`` 英文文档首页示例。注意，示例中由于使用了sphinx的原始主题，所以页面的风格与官网并不一致，但这并不影响开发者进行调试。
 
 ..  image:: src/doc_en.png
     :align: center
diff --git a/doc/v2/dev/write_docs_en.rst b/doc/v2/dev/write_docs_en.rst
index 15ff0d34ad622..6105455e202e4 100644
--- a/doc/v2/dev/write_docs_en.rst
+++ b/doc/v2/dev/write_docs_en.rst
@@ -68,39 +68,56 @@ Please `click here <https://github.com/PaddlePaddle/PaddlePaddle.org/blob/develo
 Manually Building the Documentation
 -------------------------------------
 
-Build PaddlePaddle's documentation with Docker，you need to install Docker first. Please refer to `Docker's official website <https://docs.docker.com/>`_ on how to install Docker. After Docker is installed, you could use the scripts in the source directory to build the documentation.
+Build PaddlePaddle's documentation with Docker，you need to install Docker first. Please refer to `Docker's official website <https://docs.docker.com/>`_ on how to install Docker. This method is quite similar to ` Build From Sources <http://paddlepaddle.org/docs/develop/documentation/en/build_and_install/build_from_source_en.html>`_ , by constructing, from source code, a docker image that can be used to build PaddlePaddle documentation. Enter the Docker container and use the script ``build.sh`` in the source directory to build the PaddlePaddle documentation. The specific steps are as follows:
 
-[TBD]
+.. code-block:: bash
+
+   git clone https://github.com/PaddlePaddle/Paddle.git
+   cd Paddle
+
+   # Construct a docker image from source code
+   docker build -t paddle:dev .
+   docker run -it -v $PWD:/paddle -e "WITH_GPU=OFF" -e "WITH_TESTING=OFF" -e "WITH_DOC=ON" paddle:dev /bin/bash
+
+   # Use build.sh to build PaddlePaddle documentation
+   bash -x /paddle/paddle/scripts/docker/build.sh
+
+Note: The above commands maps the current directory (source root directory) to the :code:`/paddle` directory in the container.
+
+After compiling, there should be two generated directories: ``doc/v2`` and ``doc/fluid``, where three subdirectories ``cn/html/``, ``en/html`` and ``api/en/html`` are generated. Please enter these directories respectively and execute the following commands:
+
+.. code-block:: bash
+
+   python -m SimpleHTTPServer 8088
+
+Use a web browser and navigate to http://localhost:8000, you could see the compiled  ``v2`` 's and ``fluid`` 's Chinese/English documents page and English APIs page.
 
 If you do not wish to use Docker, you can also use the following commands to directly build the PaddlePaddle documentation.
 
 .. code-block:: bash
 
-   mkdir paddle
-   cd paddle
+
    git clone https://github.com/PaddlePaddle/Paddle.git
+   cd Paddle
    mkdir -p build
    cd build
    cmake .. -DCMAKE_BUILD_TYPE=Release -DWITH_GPU=OFF -DWITH_MKL=OFF -DWITH_DOC=ON
 
    # If you only need to build documents, use the following commands
-   make -j $processors gen_proto_py
-   make -j $processors paddle_docs paddle_docs_cn
+   make -j $processors paddle_docs
 
    # If you only need to build APIs, use the following commands
-   make -j $processors gen_proto_py framework_py_proto
-   make -j $processors copy_paddle_pybind
-   make -j $processors paddle_api_docs
+   make -j $processors paddle_apis
 
 $processors indicates that as many processes as the CPU cores are started to compile in parallel. It should be set according to the number of CPU cores of your machine.
 
-After the compilation is complete, enter the ``doc/v2`` directory. If you chose to build documents, it will generate ``cn/html/`` and ``en/html`` subdirectories under this directory. If you chose to build APIs，it will generate``api/en/html`` subdirectory. Please enter these directories respectively and execute the following commands:
+After compiling, there also should be two generated directories: ``doc/v2`` and ``doc/fluid`` . If you chose to build documents, two subdirectories ``cn/html/`` and ``en/html``  will be generated in both two directories. If you chose to build APIs，a subdirectory ``api/en/html`` will be generated. Please enter these directories respectively and execute the following commands:
 
 .. code-block:: bash
 
    python -m SimpleHTTPServer 8088
 
-Use a web browser and navigate to http://localhost:8000, you could see the compiled Chinese/English documents page and the English APIs page. The following figure is an example of the built English documents home page. Note that due to the sphinx's original theme used in the example, the style of the page is not consistent with the official website, but this does not affect the developer's debugging.
+Use a web browser and navigate to http://localhost:8000, you could see the compiled  ``v2`` 's and ``fluid`` 's Chinese/English documents page and English APIs page. The following figure is an example of the built ``v2`` 's English documents home page. Note that due to the sphinx's original theme used in the example, the style of the page is not consistent with the official website, but this does not affect the developer's debugging.
 
 ..  image:: src/doc_en.png
     :align: center