From 64a902c95f85f9f45007ab43280844e3572709a0 Mon Sep 17 00:00:00 2001 From: Edward Cormany Date: Thu, 17 Aug 2023 11:59:50 -0400 Subject: [PATCH 1/9] morning copy QA changes --- .../__tests__/OnDeviceDisplayAppFallback.test.tsx | 2 +- app/src/assets/localization/en/app_settings.json | 4 ++-- app/src/assets/localization/en/device_settings.json | 6 +++--- app/src/assets/localization/en/protocol_info.json | 2 +- app/src/assets/localization/en/protocol_setup.json | 12 ++++++------ .../__tests__/MultipleModuleModal.test.tsx | 2 +- .../RobotSettingsDashboard/RobotSystemVersion.tsx | 2 +- .../__tests__/RobotSystemVersion.test.tsx | 2 +- .../AppSettings/__test__/AdvancedSettings.test.tsx | 2 +- .../__tests__/RobotSettingsDashboard.test.tsx | 6 +++--- .../ProtocolDashboard/__tests__/NoProtocols.test.tsx | 2 +- 11 files changed, 21 insertions(+), 21 deletions(-) diff --git a/app/src/App/__tests__/OnDeviceDisplayAppFallback.test.tsx b/app/src/App/__tests__/OnDeviceDisplayAppFallback.test.tsx index e747aee88a5..aaa8f1f1d8d 100644 --- a/app/src/App/__tests__/OnDeviceDisplayAppFallback.test.tsx +++ b/app/src/App/__tests__/OnDeviceDisplayAppFallback.test.tsx @@ -44,7 +44,7 @@ describe('OnDeviceDisplayAppFallback', () => { const [{ getByText }] = render(props) getByText('An unknown error has occurred') getByText( - 'You need to restart your robot. Then download the robot logs from the Opentrons App and send them to support@opentrons.com for assistance.' + 'You need to restart the touchscreen. Then download the robot logs from the Opentrons App and send them to support@opentrons.com for assistance.' ) getByText('Restart touchscreen') }) diff --git a/app/src/assets/localization/en/app_settings.json b/app/src/assets/localization/en/app_settings.json index 1dd1dd771f6..735851d0fc0 100644 --- a/app/src/assets/localization/en/app_settings.json +++ b/app/src/assets/localization/en/app_settings.json @@ -33,8 +33,8 @@ "discovery_timeout": "Discovery timed out.", "download_update": "Download app update", "enable_dev_tools_description": "Enabling this setting opens Developer Tools on app launch, enables additional logging and gives access to feature flags.", - "enable_dev_tools": "Enable Developer Tools", - "error_boundary_description": "You need to restart your robot. Then download the robot logs from the Opentrons App and send them to support@opentrons.com for assistance.", + "enable_dev_tools": "Developer Tools", + "error_boundary_description": "You need to restart the touchscreen. Then download the robot logs from the Opentrons App and send them to support@opentrons.com for assistance.", "error_boundary_title": "An unknown error has occurred", "feature_flags": "Feature Flags", "general": "General", diff --git a/app/src/assets/localization/en/device_settings.json b/app/src/assets/localization/en/device_settings.json index 30e7a3a0883..20efa1bad6e 100644 --- a/app/src/assets/localization/en/device_settings.json +++ b/app/src/assets/localization/en/device_settings.json @@ -8,7 +8,7 @@ "alternative_security_types_description": "The Opentrons App supports connecting Flex to various enterprise access points. Connect via USB and finish setup in the app.", "alternative_security_types": "Alternative security types", "app_change_in": "App Changes in {{version}}", - "apply_historic_offsets": "Apply labware offsets", + "apply_historic_offsets": "Apply Labware Offsets", "are_you_sure_you_want_to_disconnect": "Are you sure you want to disconnect from {{ssid}}?", "attach_a_pipette_before_calibrating": "Attach a pipette in order to perform calibration", "boot_scripts": "Boot scripts", @@ -71,7 +71,7 @@ "deck_calibration_modal_title": "Are you sure you want to calibrate?", "deck_calibration_recommended": "Deck calibration recommended", "deck_calibration_title": "Deck Calibration", - "dev_tools_description": "Enable additional logging and allow access to feature flags.", + "dev_tools_description": "Access additional logging and feature flags.", "device_reset_description": "Reset labware calibration, boot scripts, and/or robot calibration to factory settings.", "device_reset_slideout_description": "Select individual settings to only clear specific data types.", "device_reset": "Device Reset", @@ -167,7 +167,7 @@ "none_description": "Not recommended", "not_calibrated_short": "Not calibrated", "not_calibrated": "Not calibrated yet", - "not_connected_via_ethernet": "Not connected via ethernet", + "not_connected_via_ethernet": "Not connected via Ethernet", "not_connected_via_usb": "Not connected via USB", "not_connected_via_wifi": "Not connected via Wi-Fi", "not_connected_via_wired_usb": "Not connected via wired USB", diff --git a/app/src/assets/localization/en/protocol_info.json b/app/src/assets/localization/en/protocol_info.json index bce296f2a90..48f07abdc00 100644 --- a/app/src/assets/localization/en/protocol_info.json +++ b/app/src/assets/localization/en/protocol_info.json @@ -77,7 +77,7 @@ "run_again": "Run again", "run_protocol": "Run protocol", "run_timestamp_title": "Run timestamp", - "send_a_protocol_to_store": "Send a protocol from the Opentrons app to get started.", + "send_a_protocol_to_store": "Send a protocol from the Opentrons App to get started.", "simulation_in_progress": "Simulation in Progress", "timestamp": "+{{index}}", "too_many_pins_body": "Remove a protocol in order to add more protocols to your pinned list.", diff --git a/app/src/assets/localization/en/protocol_setup.json b/app/src/assets/localization/en/protocol_setup.json index 7a24a27f38f..dc4eed5ed26 100644 --- a/app/src/assets/localization/en/protocol_setup.json +++ b/app/src/assets/localization/en/protocol_setup.json @@ -51,8 +51,8 @@ "initial_liquids_num_plural": "{{count}} initial liquids", "initial_liquids_num": "{{count}} initial liquid", "initial_location": "Initial Location", - "instruments_connected_plural": "{{count}} instruments connected", - "instruments_connected": "{{count}} instrument connected", + "instruments_connected_plural": "{{count}} instruments attached", + "instruments_connected": "{{count}} instrument attached", "instruments": "Instruments", "labware_help_example": "Alice is using a labware in Slot 6. During labware position check, she adjust the pipette position while checking the A1 of the labware to 0.2mm in X, and 1.2mm in Z. Later, Bob is preparing to run the same protocol on that robot. The labware offset that Alice created in Slot 6 will be applied for Bob’s protocol unless he changes or clears it.", "labware_latch_instructions": "Use latch control for easy placement of labware.", @@ -77,7 +77,7 @@ "learn_more": "Learn more", "liquid_setup_step_description": "View liquid starting locations and volumes", "liquid_setup_step_title": "Initial Liquid Setup", - "liquids_not_in_setup": "Liquids not in setup", + "liquids_not_in_setup": "No liquids used in this protocol", "liquids_not_in_the_protocol": "no liquids are specified for this protocol.", "liquids": "Liquids", "list_view": "List View", @@ -104,8 +104,8 @@ "module_setup_step_description": "Plug in and turn on the required module via the robot's USB Port. Place the module as shown in the deck map.", "module_setup_step_title": "Module Setup", "module_slot_location": "Slot {{slotName}}, {{moduleName}}", - "modules_connected_plural": "{{count}} modules connected", - "modules_connected": "{{count}} module connected", + "modules_connected_plural": "{{count}} modules attached", + "modules_connected": "{{count}} module attached", "modules_setup_step_title": "Module Setup", "modules": "Modules", "mount_title": "{{mount}} MOUNT:", @@ -115,7 +115,7 @@ "multiple_modules_help_link_title": "See How To Set Up Modules of the Same Type", "multiple_modules_learn_more": "Learn more about using multiple modules of the same type", "multiple_modules_missing": "Multiple modules missing", - "multiple_modules_modal": "Setting up modules of the same type", + "multiple_modules_modal": "Setting up multiple modules of the same type", "multiple_modules": "Multiple modules of the same type", "multiple_of_most_modules": "You can use multiples of most module types within a single Python protocol by connecting and loading the modules in a specific order. The robot will initialize the matching module attached to the lowest numbered port first, regardless of what deck slot it occupies.", "must_have_labware_and_pip": "Protocol must load labware and a pipette", diff --git a/app/src/organisms/Devices/ProtocolRun/SetupModules/__tests__/MultipleModuleModal.test.tsx b/app/src/organisms/Devices/ProtocolRun/SetupModules/__tests__/MultipleModuleModal.test.tsx index abcd330e056..0a893fc4923 100644 --- a/app/src/organisms/Devices/ProtocolRun/SetupModules/__tests__/MultipleModuleModal.test.tsx +++ b/app/src/organisms/Devices/ProtocolRun/SetupModules/__tests__/MultipleModuleModal.test.tsx @@ -25,7 +25,7 @@ describe('MultipleModulesModal', () => { it('should render the correct header', () => { const { getByRole } = render(props) - getByRole('heading', { name: 'Setting up modules of the same type' }) + getByRole('heading', { name: 'Setting up multiple modules of the same type' }) }) it('should render the correct body', () => { const { getByText, getByAltText } = render(props) diff --git a/app/src/organisms/RobotSettingsDashboard/RobotSystemVersion.tsx b/app/src/organisms/RobotSettingsDashboard/RobotSystemVersion.tsx index e2d6d1436c4..16b30398e7b 100644 --- a/app/src/organisms/RobotSettingsDashboard/RobotSystemVersion.tsx +++ b/app/src/organisms/RobotSettingsDashboard/RobotSystemVersion.tsx @@ -89,7 +89,7 @@ export function RobotSystemVersion({ {`${t('device_details:current_version')}:`} + >{`${t('device_details:current_version')}`} {currentVersion} diff --git a/app/src/organisms/RobotSettingsDashboard/__tests__/RobotSystemVersion.test.tsx b/app/src/organisms/RobotSettingsDashboard/__tests__/RobotSystemVersion.test.tsx index cdcd5fba2cb..486a684e8a0 100644 --- a/app/src/organisms/RobotSettingsDashboard/__tests__/RobotSystemVersion.test.tsx +++ b/app/src/organisms/RobotSettingsDashboard/__tests__/RobotSystemVersion.test.tsx @@ -50,7 +50,7 @@ describe('RobotSystemVersion', () => { getByText( 'View latest release notes at https://github.com/Opentrons/opentrons' ) - getByText('Current Version:') + getByText('Current Version') getByText('mock7.0.0') }) diff --git a/app/src/pages/AppSettings/__test__/AdvancedSettings.test.tsx b/app/src/pages/AppSettings/__test__/AdvancedSettings.test.tsx index 53132159442..d7abab1aeae 100644 --- a/app/src/pages/AppSettings/__test__/AdvancedSettings.test.tsx +++ b/app/src/pages/AppSettings/__test__/AdvancedSettings.test.tsx @@ -138,7 +138,7 @@ describe('AdvancedSettings', () => { getByText('Additional Custom Labware Source Folder') getByText('Prevent Robot Caching') getByText('Clear Unavailable Robots') - getByText('Enable Developer Tools') + getByText('Developer Tools') getByText('OT-2 Advanced Settings') getByText('Tip Length Calibration Method') getByText('USB-to-Ethernet Adapter Information') diff --git a/app/src/pages/OnDeviceDisplay/RobotSettingsDashboard/__tests__/RobotSettingsDashboard.test.tsx b/app/src/pages/OnDeviceDisplay/RobotSettingsDashboard/__tests__/RobotSettingsDashboard.test.tsx index 85133728e71..63472f567cd 100644 --- a/app/src/pages/OnDeviceDisplay/RobotSettingsDashboard/__tests__/RobotSettingsDashboard.test.tsx +++ b/app/src/pages/OnDeviceDisplay/RobotSettingsDashboard/__tests__/RobotSettingsDashboard.test.tsx @@ -128,10 +128,10 @@ describe('RobotSettingsDashboard', () => { getByText('Touchscreen Brightness') getByText('Device Reset') getByText('Update Channel') - getByText('Apply labware offsets') + getByText('Apply Labware Offsets') getByText('Use stored data when setting up a protocol.') - getByText('Enable Developer Tools') - getByText('Enable additional logging and allow access to feature flags.') + getByText('Developer Tools') + getByText('Access additional logging and feature flags.') expect(getAllByText('Off').length).toBe(3) // LED & DEV tools & historic offsets }) diff --git a/app/src/pages/ProtocolDashboard/__tests__/NoProtocols.test.tsx b/app/src/pages/ProtocolDashboard/__tests__/NoProtocols.test.tsx index eccc0015b50..9a867671936 100644 --- a/app/src/pages/ProtocolDashboard/__tests__/NoProtocols.test.tsx +++ b/app/src/pages/ProtocolDashboard/__tests__/NoProtocols.test.tsx @@ -16,7 +16,7 @@ describe('NoProtocols', () => { it('should render text and image', () => { const [{ getByText, getByRole }] = render() getByText('No protocols to show!') - getByText('Send a protocol from the Opentrons app to get started.') + getByText('Send a protocol from the Opentrons App to get started.') const image = getByRole('img') expect(image.getAttribute('src')).toEqual(NO_PROTOCOLS_PNG_FINE_NAME) }) From f76b94a3b1b7db0f18ba26a264c6454b7dc24230 Mon Sep 17 00:00:00 2001 From: Edward Cormany Date: Thu, 17 Aug 2023 15:33:54 -0400 Subject: [PATCH 2/9] afternoon copy QA changes --- .../localization/en/device_settings.json | 4 +-- .../localization/en/gripper_wizard_flows.json | 33 ++++++++++--------- .../en/labware_position_check.json | 6 ++-- .../localization/en/pipette_wizard_flows.json | 4 +-- app/src/assets/localization/en/shared.json | 2 +- .../organisms/GripperWizardFlows/MovePin.tsx | 2 +- .../__tests__/BeforeBeginning.test.tsx | 10 +++--- .../__tests__/MountGripper.test.tsx | 4 +-- .../__tests__/MovePin.test.tsx | 16 ++++----- .../__tests__/Success.test.tsx | 8 ++--- .../__tests__/AttachProbe.test.tsx | 6 ++-- .../__tests__/DetachProbe.test.tsx | 4 +-- .../__tests__/NameRobot.test.tsx | 4 +-- 13 files changed, 52 insertions(+), 51 deletions(-) diff --git a/app/src/assets/localization/en/device_settings.json b/app/src/assets/localization/en/device_settings.json index 20efa1bad6e..c2c3c2fa1e7 100644 --- a/app/src/assets/localization/en/device_settings.json +++ b/app/src/assets/localization/en/device_settings.json @@ -152,7 +152,7 @@ "name_rule_error_exist": "Oops! Name is already in use. Choose a different name.", "name_rule_error_name_length": "Oops! Robot name must follow the character count and limitations", "name_rule_error_too_short": "Oops! Too short. Robot name must be at least 1 character.", - "name_your_robot_description": "Don’t worry, you can change this later in your settings.", + "name_your_robot_description": "Don’t worry, you can always change this in your settings.", "name_your_robot": "Name your robot", "need_another_security_type": "Need another security type?", "network_name": "Network Name", @@ -187,7 +187,7 @@ "pipette_offset_calibrations_history": "See all Pipette Offset Calibration history", "pipette_offset_calibrations_title": "Pipette Offset Calibrations", "privacy": "Privacy", - "proceed_without_updating": "Proceed without updating", + "proceed_without_updating": "Proceed without update", "protocol_run_history": "Protocol run History", "recalibrate_deck": "Recalibrate deck", "recalibrate_gripper": "Recalibrate gripper", diff --git a/app/src/assets/localization/en/gripper_wizard_flows.json b/app/src/assets/localization/en/gripper_wizard_flows.json index e484f748061..620b6b58da7 100644 --- a/app/src/assets/localization/en/gripper_wizard_flows.json +++ b/app/src/assets/localization/en/gripper_wizard_flows.json @@ -1,44 +1,45 @@ { "are_you_sure_exit": "Are you sure you want to exit before completing {{flow}}?", "attach_gripper": "Attach Gripper", - "attached_gripper_and_screw_in": "Attach the gripper to the robot by aligning the connector and ensuring a secure connection. Hold the gripper in place and use the hex screwdriver to tighten the gripper screws. Then test that the gripper is securely attached by gently pulling it side to side.", + "attached_gripper_and_screw_in": "Attach the gripper to the robot by aligning the connector and pressing to ensure a secure connection. Hold the gripper in place. Tighten the top gripper screw first, and the bottom screw second. Then test that the gripper is securely attached by gently pulling it side to side.", "before_you_begin": "Before you begin", "begin_calibration": "Begin calibration", - "calibrate_gripper": "Calibrate gripper", + "calibrate_gripper": "Calibrate Gripper", "calibration_pin": "Calibration Pin", "complete_calibration": "Complete calibration", - "connect_and_screw_in_gripper": "Connect and Screw In Gripper", + "connect_and_screw_in_gripper": "Connect and secure gripper", "continue": "Continue", + "continue_calibration": "Continue calibration", "detach_gripper": "Detach Gripper", "firmware_updating": "A firmware update is required, instrument is updating...", "get_started": "Get started", "gripper_calibration": "Gripper Calibration", "gripper_recalibration": "Gripper Recalibration", "gripper_still_attached": "Flex Gripper Still Attached", - "gripper_successfully_attached_and_calibrated": "Flex Gripper Successfully Attached and Calibrated", - "gripper_successfully_attached": "Flex Gripper Successfully Attached", - "gripper_successfully_calibrated": "Flex Gripper Successfully Calibrated", - "gripper_successfully_detached": "Flex Gripper Successfully Detached", + "gripper_successfully_attached_and_calibrated": "Flex Gripper successfully attached and calibrated", + "gripper_successfully_attached": "Gripper successfully attached", + "gripper_successfully_calibrated": "Flex Gripper successfully calibrated", + "gripper_successfully_detached": "Flex Gripper successfully detached", "gripper": "Gripper", "hex_screwdriver": "2.5 mm Hex Screwdriver", "hold_gripper_and_loosen_screws": "Hold the gripper in place and loosen the screws. (The screws are captive and will not come apart from the gripper) Then carefully remove the gripper", - "insert_pin_into_front_jaw": "Insert Calibration Pin into Front Jaw", - "insert_pin_into_rear_jaw": "Insert Calibration Pin into Rear Jaw", + "insert_pin_into_front_jaw": "Insert calibration pin in front jaw", + "insert_pin_into_rear_jaw": "Insert calibration pin in rear jaw", "loosen_screws_and_detach": "Loosen Screws and Detach", "move_gantry_to_front": "Move gantry to front", - "move_pin_from_front_to_rear_jaw": "Remove the calibration pin from the front jaw and attach it to the similar location on the rear jaw", + "move_pin_from_front_to_rear_jaw": "Remove the calibration pin from the front jaw and attach it to the rear jaw.", "move_pin_from_rear_jaw_to_storage": "Take the calibration pin from the rear gripper jaw and return it to its storage location.", "move_pin_from_storage_to_front_jaw": "Take the calibration pin from its storage location. Magnetically attach the pin to the hole on the underside of the front gripper jaw.", "please_retry_gripper_detach": "Please retry the detachment process to successfully detach the Gripper.", "progress_will_be_lost": "{{flow}} progress will be lost", "provided_with_robot_use_right_size": "Provided with robot. Using another size can strip the instrument’s screws.", - "remove_calibration_pin": "Remove Calibration Pin", - "remove_labware_to_get_started_attaching": "To get started, remove labware from the rest of the deck and clean up the work area to make attachment and calibration easier. Also gather the needed equipment shown on the right hand sideThe calibration pin is included with the gripper and should be stored on the exposed panel of the gripper.", - "remove_labware_to_get_started_detaching": "To get started, remove labware from the rest of the deck and clean up the work area to make attachment and calibration easier. Also gather the needed equipment shown on the right hand side", - "remove_labware_to_get_started_recalibrating": "To get started, remove labware from the rest of the deck and clean up the work area to make attachment and calibration easier. Also gather the needed equipment shown on the right hand sideThe calibration pin is included with the gripper and should be stored on the exposed panel of the gripper.", - "remove_probe": "Unlatch the calibration probe, remove it from the pipette nozzle, and return it to its storage location.", + "remove_calibration_pin": "Remove calibration pin", + "remove_labware_to_get_started_attaching": "To get started, remove labware from the deck and clean up the working area to make detachment easier. Also gather the needed equipment shown to the right.The calibration pin is included with the gripper and should be stored on its right side above the jaws.", + "remove_labware_to_get_started_detaching": "To get started, remove labware from the deck and clean up the working area to make detachment easier. Also gather the needed equipment shown to the right.", + "remove_labware_to_get_started_recalibrating": "To get started, remove labware from the deck and clean up the working area to make detachment easier. Also gather the needed equipment shown to the right.The calibration pin is included with the gripper and should be stored on its right side above the jaws.", + "remove_probe": "Unlock the calibration probe, remove it from the pipette nozzle, and return it to its storage location.", "return_pin_error": "Return the calibration pin to its storage location before exiting. {{error}}", - "stand_back_gripper_is_calibrating": "Stand Back, Flex Gripper is Calibrating", + "stand_back_gripper_is_calibrating": "Stand back, gripper is calibrating", "try_again": "Try again", "unable_to_detect_gripper": "Unable to detect Gripper" } diff --git a/app/src/assets/localization/en/labware_position_check.json b/app/src/assets/localization/en/labware_position_check.json index 82eb04ffe87..44d4e3339a6 100644 --- a/app/src/assets/localization/en/labware_position_check.json +++ b/app/src/assets/localization/en/labware_position_check.json @@ -14,8 +14,8 @@ "confirm_position_and_move": "Confirm position, move to slot {{next_slot}}", "confirm_position_and_pick_up_tip": "Confirm position, pick up tip", "confirm_position_and_return_tip": "Confirm position, return tip to Slot {{next_slot}} and home", - "ensure_nozzle_is_above_tip": "Ensure that the pipette nozzle furthest from you is centered above and level with the top of the tip in the A1 position. If it isn't, use the controls below or your keyboard to jog the pipette until it is properly aligned.", - "ensure_tip_is_above_well": "Ensure that the pipette tip furthest from you is centered above and level with well A1 on the labware. If it isn't, use the controls below or your keyboard to jog the pipette until it is properly aligned.", + "ensure_nozzle_is_above_tip": "Ensure that the pipette nozzle furthest from you is centered above and level with the top of the tip in the A1 position. If it isn't, tap Move pipette and then jog the pipette until it is properly aligned.", + "ensure_tip_is_above_well": "Ensure that the pipette tip furthest from you is centered above and level with well A1 on the labware. If it isn't, tap Move pipette and then jog the pipette until it is properly aligned.", "error_modal_header": "Something went wrong", "error_modal_problem_in_app": "There was an error performing Labware Position Check. Please restart the app. If the problem persists, please contact Opentrons Support", "error_modal_problem_on_robot": "There was an error processing your request on the robot", @@ -89,7 +89,7 @@ "see_how_offsets_work": "See how labware offsets work", "slot_name": "slot {{slotName}}", "slot": "Slot {{slotName}}", - "slot_location": "slot location", + "slot_location": "Slot Location", "start_position_check": "begin labware position check, move to Slot {{initial_labware_slot}}", "stored_offset_data": "Stored Labware Offset data", "stored_offsets_for_this_protocol": "Stored Labware Offset data that applies to this protocol", diff --git a/app/src/assets/localization/en/pipette_wizard_flows.json b/app/src/assets/localization/en/pipette_wizard_flows.json index 2a69494ca83..db4c7e1f32f 100644 --- a/app/src/assets/localization/en/pipette_wizard_flows.json +++ b/app/src/assets/localization/en/pipette_wizard_flows.json @@ -15,7 +15,7 @@ "cal_pipette": "Calibrate pipette", "calibrate_96_channel": "Calibrate 96-Channel Pipette", "calibrate_pipette": "calibrate {{mount}} pipette", - "calibration_probe_touching": "The calibration probe will touch the sides of the calibration square in slot {{slotNumber}} to determine its exact position", + "calibration_probe_touching": "The calibration probe will touch the sides of the calibration square in slot {{slotNumber}} to determine its exact position.", "cancel_attachment": "cancel attachment", "choose_pipette": "Choose a pipette to attach", "complete_cal": "Complete calibration", @@ -69,7 +69,7 @@ "remove_cal_probe": "remove calibration probe", "remove_labware_to_get_started": "To get started, remove labware from the deck and clean up the working area to make calibration easier. Also gather the needed equipment shown to the right.The calibration probe is included with the robot and should be stored on the front pillar of the robot.", "remove_labware": "To get started, remove labware from the deck and clean up the working area to make attachment and calibration easier. Also gather the needed equipment shown to the right.The calibration probe is included with the robot and should be stored on the front pillar of the robot.", - "remove_probe": "unlatch the calibration probe, remove it from the nozzle, and return it to its storage location.", + "remove_probe": "unlock the calibration probe, remove it from the nozzle, and return it to its storage location.", "replace_pipette": "replace {{mount}} pipette", "return_probe_error": "Return the calibration probe to its storage location before exiting. {{error}}", "single_mount_attached_error": "Single mount pipette is selected when this is the 96 channel flow", diff --git a/app/src/assets/localization/en/shared.json b/app/src/assets/localization/en/shared.json index 716fb84d84d..903f311f855 100644 --- a/app/src/assets/localization/en/shared.json +++ b/app/src/assets/localization/en/shared.json @@ -62,7 +62,7 @@ "robot_was_seen_but_is_unreachable": "This robot has been seen recently, but is currently not reachable at IP address {{hostname}}", "something_went_wrong": "something went wrong", "sort_by": "Sort by", - "stand_back_robot_is_in_motion": "Stand Back, Robot is in Motion", + "stand_back_robot_is_in_motion": "Stand back, robot is in motion", "start": "start", "starting": "starting", "step": "Step {{current}} / {{max}}", diff --git a/app/src/organisms/GripperWizardFlows/MovePin.tsx b/app/src/organisms/GripperWizardFlows/MovePin.tsx index a9a5b564f4e..cee1eadfc98 100644 --- a/app/src/organisms/GripperWizardFlows/MovePin.tsx +++ b/app/src/organisms/GripperWizardFlows/MovePin.tsx @@ -163,7 +163,7 @@ export const MovePin = (props: MovePinProps): JSX.Element | null => { ), header: t('insert_pin_into_rear_jaw'), body: t('move_pin_from_front_to_rear_jaw'), - buttonText: t('continue'), + buttonText: t('continue_calibration'), prepImage: (