diff --git a/api/src/opentrons/protocol_engine/state/commands.py b/api/src/opentrons/protocol_engine/state/commands.py index 5b5202885d4..95f091caadd 100644 --- a/api/src/opentrons/protocol_engine/state/commands.py +++ b/api/src/opentrons/protocol_engine/state/commands.py @@ -977,7 +977,12 @@ def validate_action_allowed( # noqa: C901 elif action.request.intent == CommandIntent.FIXIT: if ( self._state.queue_status != QueueStatus.AWAITING_RECOVERY - or not self._state.is_door_blocking + or self.get_status() + in ( + EngineStatus.BLOCKED_BY_OPEN_DOOR, + EngineStatus.AWAITING_RECOVERY_BLOCKED_BY_OPEN_DOOR, + ) + and action.request.commandType != "unsafe/ungripLabware" ): raise FixitCommandNotAllowedError( "Fixit commands are not allowed when the run is not in a recoverable state." diff --git a/shared-data/command/schemas/9.json b/shared-data/command/schemas/9.json index 1ae8bce4364..3593a38a485 100644 --- a/shared-data/command/schemas/9.json +++ b/shared-data/command/schemas/9.json @@ -74,7 +74,8 @@ "unsafe/blowOutInPlace": "#/definitions/UnsafeBlowOutInPlaceCreate", "unsafe/dropTipInPlace": "#/definitions/UnsafeDropTipInPlaceCreate", "unsafe/updatePositionEstimators": "#/definitions/UpdatePositionEstimatorsCreate", - "unsafe/engageAxes": "#/definitions/UnsafeEngageAxesCreate" + "unsafe/engageAxes": "#/definitions/UnsafeEngageAxesCreate", + "unsafe/ungripLabware": "#/definitions/UnsafeUngripLabwareCreate" } }, "oneOf": [ @@ -287,13 +288,21 @@ }, { "$ref": "#/definitions/UnsafeEngageAxesCreate" + }, + { + "$ref": "#/definitions/UnsafeUngripLabwareCreate" } ], "definitions": { "WellOrigin": { "title": "WellOrigin", "description": "Origin of WellLocation offset.\n\nProps:\n TOP: the top-center of the well\n BOTTOM: the bottom-center of the well\n CENTER: the middle-center of the well", - "enum": ["top", "bottom", "center", "meniscus"], + "enum": [ + "top", + "bottom", + "center", + "meniscus" + ], "type": "string" }, "WellOffset": { @@ -378,12 +387,22 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "flowRate", "volume", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "flowRate", + "volume", + "pipetteId" + ] }, "CommandIntent": { "title": "CommandIntent", "description": "Run intent for a given command.\n\nProps:\n PROTOCOL: the command is part of the protocol run itself.\n SETUP: the command is part of the setup phase of a run.", - "enum": ["protocol", "setup", "fixit"], + "enum": [ + "protocol", + "setup", + "fixit" + ], "type": "string" }, "AspirateCreate": { @@ -394,7 +413,9 @@ "commandType": { "title": "Commandtype", "default": "aspirate", - "enum": ["aspirate"], + "enum": [ + "aspirate" + ], "type": "string" }, "params": { @@ -414,7 +435,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AspirateInPlaceParams": { "title": "AspirateInPlaceParams", @@ -439,7 +462,11 @@ "type": "string" } }, - "required": ["flowRate", "volume", "pipetteId"] + "required": [ + "flowRate", + "volume", + "pipetteId" + ] }, "AspirateInPlaceCreate": { "title": "AspirateInPlaceCreate", @@ -449,7 +476,9 @@ "commandType": { "title": "Commandtype", "default": "aspirateInPlace", - "enum": ["aspirateInPlace"], + "enum": [ + "aspirateInPlace" + ], "type": "string" }, "params": { @@ -469,7 +498,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CommentParams": { "title": "CommentParams", @@ -482,7 +513,9 @@ "type": "string" } }, - "required": ["message"] + "required": [ + "message" + ] }, "CommentCreate": { "title": "CommentCreate", @@ -492,7 +525,9 @@ "commandType": { "title": "Commandtype", "default": "comment", - "enum": ["comment"], + "enum": [ + "comment" + ], "type": "string" }, "params": { @@ -512,7 +547,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ConfigureForVolumeParams": { "title": "ConfigureForVolumeParams", @@ -536,7 +573,10 @@ "type": "string" } }, - "required": ["pipetteId", "volume"] + "required": [ + "pipetteId", + "volume" + ] }, "ConfigureForVolumeCreate": { "title": "ConfigureForVolumeCreate", @@ -546,7 +586,9 @@ "commandType": { "title": "Commandtype", "default": "configureForVolume", - "enum": ["configureForVolume"], + "enum": [ + "configureForVolume" + ], "type": "string" }, "params": { @@ -566,7 +608,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AllNozzleLayoutConfiguration": { "title": "AllNozzleLayoutConfiguration", @@ -576,7 +620,9 @@ "style": { "title": "Style", "default": "ALL", - "enum": ["ALL"], + "enum": [ + "ALL" + ], "type": "string" } } @@ -589,17 +635,26 @@ "style": { "title": "Style", "default": "SINGLE", - "enum": ["SINGLE"], + "enum": [ + "SINGLE" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "RowNozzleLayoutConfiguration": { "title": "RowNozzleLayoutConfiguration", @@ -609,17 +664,26 @@ "style": { "title": "Style", "default": "ROW", - "enum": ["ROW"], + "enum": [ + "ROW" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "ColumnNozzleLayoutConfiguration": { "title": "ColumnNozzleLayoutConfiguration", @@ -629,17 +693,26 @@ "style": { "title": "Style", "default": "COLUMN", - "enum": ["COLUMN"], + "enum": [ + "COLUMN" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "QuadrantNozzleLayoutConfiguration": { "title": "QuadrantNozzleLayoutConfiguration", @@ -649,13 +722,20 @@ "style": { "title": "Style", "default": "QUADRANT", - "enum": ["QUADRANT"], + "enum": [ + "QUADRANT" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" }, "frontRightNozzle": { @@ -671,7 +751,11 @@ "type": "string" } }, - "required": ["primaryNozzle", "frontRightNozzle", "backLeftNozzle"] + "required": [ + "primaryNozzle", + "frontRightNozzle", + "backLeftNozzle" + ] }, "ConfigureNozzleLayoutParams": { "title": "ConfigureNozzleLayoutParams", @@ -704,7 +788,10 @@ ] } }, - "required": ["pipetteId", "configurationParams"] + "required": [ + "pipetteId", + "configurationParams" + ] }, "ConfigureNozzleLayoutCreate": { "title": "ConfigureNozzleLayoutCreate", @@ -714,7 +801,9 @@ "commandType": { "title": "Commandtype", "default": "configureNozzleLayout", - "enum": ["configureNozzleLayout"], + "enum": [ + "configureNozzleLayout" + ], "type": "string" }, "params": { @@ -734,7 +823,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CustomParams": { "title": "CustomParams", @@ -750,7 +841,9 @@ "commandType": { "title": "Commandtype", "default": "custom", - "enum": ["custom"], + "enum": [ + "custom" + ], "type": "string" }, "params": { @@ -770,7 +863,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DispenseParams": { "title": "DispenseParams", @@ -819,7 +914,13 @@ "type": "number" } }, - "required": ["labwareId", "wellName", "flowRate", "volume", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "flowRate", + "volume", + "pipetteId" + ] }, "DispenseCreate": { "title": "DispenseCreate", @@ -829,7 +930,9 @@ "commandType": { "title": "Commandtype", "default": "dispense", - "enum": ["dispense"], + "enum": [ + "dispense" + ], "type": "string" }, "params": { @@ -849,7 +952,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DispenseInPlaceParams": { "title": "DispenseInPlaceParams", @@ -879,7 +984,11 @@ "type": "number" } }, - "required": ["flowRate", "volume", "pipetteId"] + "required": [ + "flowRate", + "volume", + "pipetteId" + ] }, "DispenseInPlaceCreate": { "title": "DispenseInPlaceCreate", @@ -889,7 +998,9 @@ "commandType": { "title": "Commandtype", "default": "dispenseInPlace", - "enum": ["dispenseInPlace"], + "enum": [ + "dispenseInPlace" + ], "type": "string" }, "params": { @@ -909,7 +1020,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "BlowOutParams": { "title": "BlowOutParams", @@ -947,7 +1060,12 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "flowRate", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "flowRate", + "pipetteId" + ] }, "BlowOutCreate": { "title": "BlowOutCreate", @@ -957,7 +1075,9 @@ "commandType": { "title": "Commandtype", "default": "blowout", - "enum": ["blowout"], + "enum": [ + "blowout" + ], "type": "string" }, "params": { @@ -977,7 +1097,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "BlowOutInPlaceParams": { "title": "BlowOutInPlaceParams", @@ -996,7 +1118,10 @@ "type": "string" } }, - "required": ["flowRate", "pipetteId"] + "required": [ + "flowRate", + "pipetteId" + ] }, "BlowOutInPlaceCreate": { "title": "BlowOutInPlaceCreate", @@ -1006,7 +1131,9 @@ "commandType": { "title": "Commandtype", "default": "blowOutInPlace", - "enum": ["blowOutInPlace"], + "enum": [ + "blowOutInPlace" + ], "type": "string" }, "params": { @@ -1026,12 +1153,19 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DropTipWellOrigin": { "title": "DropTipWellOrigin", "description": "The origin of a DropTipWellLocation offset.\n\nProps:\n TOP: the top-center of the well\n BOTTOM: the bottom-center of the well\n CENTER: the middle-center of the well\n DEFAULT: the default drop-tip location of the well,\n based on pipette configuration and length of the tip.", - "enum": ["top", "bottom", "center", "default"], + "enum": [ + "top", + "bottom", + "center", + "default" + ], "type": "string" }, "DropTipWellLocation": { @@ -1093,7 +1227,11 @@ "type": "boolean" } }, - "required": ["pipetteId", "labwareId", "wellName"] + "required": [ + "pipetteId", + "labwareId", + "wellName" + ] }, "DropTipCreate": { "title": "DropTipCreate", @@ -1103,7 +1241,9 @@ "commandType": { "title": "Commandtype", "default": "dropTip", - "enum": ["dropTip"], + "enum": [ + "dropTip" + ], "type": "string" }, "params": { @@ -1123,7 +1263,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DropTipInPlaceParams": { "title": "DropTipInPlaceParams", @@ -1141,7 +1283,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "DropTipInPlaceCreate": { "title": "DropTipInPlaceCreate", @@ -1151,7 +1295,9 @@ "commandType": { "title": "Commandtype", "default": "dropTipInPlace", - "enum": ["dropTipInPlace"], + "enum": [ + "dropTipInPlace" + ], "type": "string" }, "params": { @@ -1171,7 +1317,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MotorAxis": { "title": "MotorAxis", @@ -1191,7 +1339,11 @@ "MountType": { "title": "MountType", "description": "An enumeration.", - "enum": ["left", "right", "extension"], + "enum": [ + "left", + "right", + "extension" + ], "type": "string" }, "HomeParams": { @@ -1224,7 +1376,9 @@ "commandType": { "title": "Commandtype", "default": "home", - "enum": ["home"], + "enum": [ + "home" + ], "type": "string" }, "params": { @@ -1244,7 +1398,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "RetractAxisParams": { "title": "RetractAxisParams", @@ -1260,7 +1416,9 @@ ] } }, - "required": ["axis"] + "required": [ + "axis" + ] }, "RetractAxisCreate": { "title": "RetractAxisCreate", @@ -1270,7 +1428,9 @@ "commandType": { "title": "Commandtype", "default": "retractAxis", - "enum": ["retractAxis"], + "enum": [ + "retractAxis" + ], "type": "string" }, "params": { @@ -1290,7 +1450,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeckSlotName": { "title": "DeckSlotName", @@ -1336,7 +1498,9 @@ ] } }, - "required": ["slotName"] + "required": [ + "slotName" + ] }, "ModuleLocation": { "title": "ModuleLocation", @@ -1349,7 +1513,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "OnLabwareLocation": { "title": "OnLabwareLocation", @@ -1362,7 +1528,9 @@ "type": "string" } }, - "required": ["labwareId"] + "required": [ + "labwareId" + ] }, "AddressableAreaLocation": { "title": "AddressableAreaLocation", @@ -1375,7 +1543,9 @@ "type": "string" } }, - "required": ["addressableAreaName"] + "required": [ + "addressableAreaName" + ] }, "LoadLabwareParams": { "title": "LoadLabwareParams", @@ -1396,7 +1566,9 @@ "$ref": "#/definitions/OnLabwareLocation" }, { - "enum": ["offDeck"], + "enum": [ + "offDeck" + ], "type": "string" }, { @@ -1430,7 +1602,12 @@ "type": "string" } }, - "required": ["location", "loadName", "namespace", "version"] + "required": [ + "location", + "loadName", + "namespace", + "version" + ] }, "LoadLabwareCreate": { "title": "LoadLabwareCreate", @@ -1440,7 +1617,9 @@ "commandType": { "title": "Commandtype", "default": "loadLabware", - "enum": ["loadLabware"], + "enum": [ + "loadLabware" + ], "type": "string" }, "params": { @@ -1460,7 +1639,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ReloadLabwareParams": { "title": "ReloadLabwareParams", @@ -1473,7 +1654,9 @@ "type": "string" } }, - "required": ["labwareId"] + "required": [ + "labwareId" + ] }, "ReloadLabwareCreate": { "title": "ReloadLabwareCreate", @@ -1483,7 +1666,9 @@ "commandType": { "title": "Commandtype", "default": "reloadLabware", - "enum": ["reloadLabware"], + "enum": [ + "reloadLabware" + ], "type": "string" }, "params": { @@ -1503,7 +1688,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LoadLiquidParams": { "title": "LoadLiquidParams", @@ -1529,7 +1716,11 @@ } } }, - "required": ["liquidId", "labwareId", "volumeByWell"] + "required": [ + "liquidId", + "labwareId", + "volumeByWell" + ] }, "LoadLiquidCreate": { "title": "LoadLiquidCreate", @@ -1539,7 +1730,9 @@ "commandType": { "title": "Commandtype", "default": "loadLiquid", - "enum": ["loadLiquid"], + "enum": [ + "loadLiquid" + ], "type": "string" }, "params": { @@ -1559,7 +1752,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ModuleModel": { "title": "ModuleModel", @@ -1605,7 +1800,10 @@ "type": "string" } }, - "required": ["model", "location"] + "required": [ + "model", + "location" + ] }, "LoadModuleCreate": { "title": "LoadModuleCreate", @@ -1615,7 +1813,9 @@ "commandType": { "title": "Commandtype", "default": "loadModule", - "enum": ["loadModule"], + "enum": [ + "loadModule" + ], "type": "string" }, "params": { @@ -1635,7 +1835,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PipetteNameType": { "title": "PipetteNameType", @@ -1698,7 +1900,10 @@ "type": "boolean" } }, - "required": ["pipetteName", "mount"] + "required": [ + "pipetteName", + "mount" + ] }, "LoadPipetteCreate": { "title": "LoadPipetteCreate", @@ -1708,7 +1913,9 @@ "commandType": { "title": "Commandtype", "default": "loadPipette", - "enum": ["loadPipette"], + "enum": [ + "loadPipette" + ], "type": "string" }, "params": { @@ -1728,12 +1935,18 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LabwareMovementStrategy": { "title": "LabwareMovementStrategy", "description": "Strategy to use for labware movement.", - "enum": ["usingGripper", "manualMoveWithPause", "manualMoveWithoutPause"], + "enum": [ + "usingGripper", + "manualMoveWithPause", + "manualMoveWithoutPause" + ], "type": "string" }, "LabwareOffsetVector": { @@ -1754,7 +1967,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveLabwareParams": { "title": "MoveLabwareParams", @@ -1780,7 +1997,9 @@ "$ref": "#/definitions/OnLabwareLocation" }, { - "enum": ["offDeck"], + "enum": [ + "offDeck" + ], "type": "string" }, { @@ -1815,7 +2034,11 @@ ] } }, - "required": ["labwareId", "newLocation", "strategy"] + "required": [ + "labwareId", + "newLocation", + "strategy" + ] }, "MoveLabwareCreate": { "title": "MoveLabwareCreate", @@ -1825,7 +2048,9 @@ "commandType": { "title": "Commandtype", "default": "moveLabware", - "enum": ["moveLabware"], + "enum": [ + "moveLabware" + ], "type": "string" }, "params": { @@ -1845,12 +2070,18 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MovementAxis": { "title": "MovementAxis", "description": "Axis on which to issue a relative movement.", - "enum": ["x", "y", "z"], + "enum": [ + "x", + "y", + "z" + ], "type": "string" }, "MoveRelativeParams": { @@ -1877,7 +2108,11 @@ "type": "number" } }, - "required": ["pipetteId", "axis", "distance"] + "required": [ + "pipetteId", + "axis", + "distance" + ] }, "MoveRelativeCreate": { "title": "MoveRelativeCreate", @@ -1887,7 +2122,9 @@ "commandType": { "title": "Commandtype", "default": "moveRelative", - "enum": ["moveRelative"], + "enum": [ + "moveRelative" + ], "type": "string" }, "params": { @@ -1907,7 +2144,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeckPoint": { "title": "DeckPoint", @@ -1927,7 +2166,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveToCoordinatesParams": { "title": "MoveToCoordinatesParams", @@ -1965,7 +2208,10 @@ ] } }, - "required": ["pipetteId", "coordinates"] + "required": [ + "pipetteId", + "coordinates" + ] }, "MoveToCoordinatesCreate": { "title": "MoveToCoordinatesCreate", @@ -1975,7 +2221,9 @@ "commandType": { "title": "Commandtype", "default": "moveToCoordinates", - "enum": ["moveToCoordinates"], + "enum": [ + "moveToCoordinates" + ], "type": "string" }, "params": { @@ -1995,7 +2243,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveToWellParams": { "title": "MoveToWellParams", @@ -2043,7 +2293,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "MoveToWellCreate": { "title": "MoveToWellCreate", @@ -2053,7 +2307,9 @@ "commandType": { "title": "Commandtype", "default": "moveToWell", - "enum": ["moveToWell"], + "enum": [ + "moveToWell" + ], "type": "string" }, "params": { @@ -2073,7 +2329,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AddressableOffsetVector": { "title": "AddressableOffsetVector", @@ -2093,7 +2351,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveToAddressableAreaParams": { "title": "MoveToAddressableAreaParams", @@ -2147,7 +2409,10 @@ "type": "boolean" } }, - "required": ["pipetteId", "addressableAreaName"] + "required": [ + "pipetteId", + "addressableAreaName" + ] }, "MoveToAddressableAreaCreate": { "title": "MoveToAddressableAreaCreate", @@ -2157,7 +2422,9 @@ "commandType": { "title": "Commandtype", "default": "moveToAddressableArea", - "enum": ["moveToAddressableArea"], + "enum": [ + "moveToAddressableArea" + ], "type": "string" }, "params": { @@ -2177,7 +2444,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveToAddressableAreaForDropTipParams": { "title": "MoveToAddressableAreaForDropTipParams", @@ -2237,7 +2506,10 @@ "type": "boolean" } }, - "required": ["pipetteId", "addressableAreaName"] + "required": [ + "pipetteId", + "addressableAreaName" + ] }, "MoveToAddressableAreaForDropTipCreate": { "title": "MoveToAddressableAreaForDropTipCreate", @@ -2247,7 +2519,9 @@ "commandType": { "title": "Commandtype", "default": "moveToAddressableAreaForDropTip", - "enum": ["moveToAddressableAreaForDropTip"], + "enum": [ + "moveToAddressableAreaForDropTip" + ], "type": "string" }, "params": { @@ -2267,7 +2541,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PrepareToAspirateParams": { "title": "PrepareToAspirateParams", @@ -2280,7 +2556,9 @@ "type": "string" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "PrepareToAspirateCreate": { "title": "PrepareToAspirateCreate", @@ -2290,7 +2568,9 @@ "commandType": { "title": "Commandtype", "default": "prepareToAspirate", - "enum": ["prepareToAspirate"], + "enum": [ + "prepareToAspirate" + ], "type": "string" }, "params": { @@ -2310,7 +2590,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForResumeParams": { "title": "WaitForResumeParams", @@ -2332,7 +2614,10 @@ "commandType": { "title": "Commandtype", "default": "waitForResume", - "enum": ["waitForResume", "pause"], + "enum": [ + "waitForResume", + "pause" + ], "type": "string" }, "params": { @@ -2352,7 +2637,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForDurationParams": { "title": "WaitForDurationParams", @@ -2370,7 +2657,9 @@ "type": "string" } }, - "required": ["seconds"] + "required": [ + "seconds" + ] }, "WaitForDurationCreate": { "title": "WaitForDurationCreate", @@ -2380,7 +2669,9 @@ "commandType": { "title": "Commandtype", "default": "waitForDuration", - "enum": ["waitForDuration"], + "enum": [ + "waitForDuration" + ], "type": "string" }, "params": { @@ -2400,7 +2691,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PickUpTipParams": { "title": "PickUpTipParams", @@ -2432,7 +2725,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "PickUpTipCreate": { "title": "PickUpTipCreate", @@ -2442,7 +2739,9 @@ "commandType": { "title": "Commandtype", "default": "pickUpTip", - "enum": ["pickUpTip"], + "enum": [ + "pickUpTip" + ], "type": "string" }, "params": { @@ -2462,7 +2761,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SavePositionParams": { "title": "SavePositionParams", @@ -2486,7 +2787,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "SavePositionCreate": { "title": "SavePositionCreate", @@ -2496,7 +2799,9 @@ "commandType": { "title": "Commandtype", "default": "savePosition", - "enum": ["savePosition"], + "enum": [ + "savePosition" + ], "type": "string" }, "params": { @@ -2516,7 +2821,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetRailLightsParams": { "title": "SetRailLightsParams", @@ -2529,7 +2836,9 @@ "type": "boolean" } }, - "required": ["on"] + "required": [ + "on" + ] }, "SetRailLightsCreate": { "title": "SetRailLightsCreate", @@ -2539,7 +2848,9 @@ "commandType": { "title": "Commandtype", "default": "setRailLights", - "enum": ["setRailLights"], + "enum": [ + "setRailLights" + ], "type": "string" }, "params": { @@ -2559,7 +2870,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TouchTipParams": { "title": "TouchTipParams", @@ -2602,7 +2915,11 @@ "type": "number" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "TouchTipCreate": { "title": "TouchTipCreate", @@ -2612,7 +2929,9 @@ "commandType": { "title": "Commandtype", "default": "touchTip", - "enum": ["touchTip"], + "enum": [ + "touchTip" + ], "type": "string" }, "params": { @@ -2632,12 +2951,20 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "StatusBarAnimation": { "title": "StatusBarAnimation", "description": "Status Bar animation options.", - "enum": ["idle", "confirm", "updating", "disco", "off"] + "enum": [ + "idle", + "confirm", + "updating", + "disco", + "off" + ] }, "SetStatusBarParams": { "title": "SetStatusBarParams", @@ -2653,7 +2980,9 @@ ] } }, - "required": ["animation"] + "required": [ + "animation" + ] }, "SetStatusBarCreate": { "title": "SetStatusBarCreate", @@ -2663,7 +2992,9 @@ "commandType": { "title": "Commandtype", "default": "setStatusBar", - "enum": ["setStatusBar"], + "enum": [ + "setStatusBar" + ], "type": "string" }, "params": { @@ -2683,18 +3014,28 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TipPresenceStatus": { "title": "TipPresenceStatus", "description": "Tip presence status reported by a pipette.", - "enum": ["present", "absent", "unknown"], + "enum": [ + "present", + "absent", + "unknown" + ], "type": "string" }, "InstrumentSensorId": { "title": "InstrumentSensorId", "description": "Primary and secondary sensor ids.", - "enum": ["primary", "secondary", "both"], + "enum": [ + "primary", + "secondary", + "both" + ], "type": "string" }, "VerifyTipPresenceParams": { @@ -2724,7 +3065,10 @@ ] } }, - "required": ["pipetteId", "expectedState"] + "required": [ + "pipetteId", + "expectedState" + ] }, "VerifyTipPresenceCreate": { "title": "VerifyTipPresenceCreate", @@ -2734,7 +3078,9 @@ "commandType": { "title": "Commandtype", "default": "verifyTipPresence", - "enum": ["verifyTipPresence"], + "enum": [ + "verifyTipPresence" + ], "type": "string" }, "params": { @@ -2754,7 +3100,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "GetTipPresenceParams": { "title": "GetTipPresenceParams", @@ -2767,7 +3115,9 @@ "type": "string" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "GetTipPresenceCreate": { "title": "GetTipPresenceCreate", @@ -2777,7 +3127,9 @@ "commandType": { "title": "Commandtype", "default": "getTipPresence", - "enum": ["getTipPresence"], + "enum": [ + "getTipPresence" + ], "type": "string" }, "params": { @@ -2797,7 +3149,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LiquidProbeParams": { "title": "LiquidProbeParams", @@ -2829,7 +3183,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "LiquidProbeCreate": { "title": "LiquidProbeCreate", @@ -2839,7 +3197,9 @@ "commandType": { "title": "Commandtype", "default": "liquidProbe", - "enum": ["liquidProbe"], + "enum": [ + "liquidProbe" + ], "type": "string" }, "params": { @@ -2859,7 +3219,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TryLiquidProbeParams": { "title": "TryLiquidProbeParams", @@ -2891,7 +3253,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "TryLiquidProbeCreate": { "title": "TryLiquidProbeCreate", @@ -2901,7 +3267,9 @@ "commandType": { "title": "Commandtype", "default": "tryLiquidProbe", - "enum": ["tryLiquidProbe"], + "enum": [ + "tryLiquidProbe" + ], "type": "string" }, "params": { @@ -2921,7 +3289,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__heater_shaker__wait_for_temperature__WaitForTemperatureParams": { "title": "WaitForTemperatureParams", @@ -2939,7 +3309,9 @@ "type": "number" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__heater_shaker__wait_for_temperature__WaitForTemperatureCreate": { "title": "WaitForTemperatureCreate", @@ -2949,7 +3321,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/waitForTemperature", - "enum": ["heaterShaker/waitForTemperature"], + "enum": [ + "heaterShaker/waitForTemperature" + ], "type": "string" }, "params": { @@ -2969,7 +3343,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__heater_shaker__set_target_temperature__SetTargetTemperatureParams": { "title": "SetTargetTemperatureParams", @@ -2987,7 +3363,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "opentrons__protocol_engine__commands__heater_shaker__set_target_temperature__SetTargetTemperatureCreate": { "title": "SetTargetTemperatureCreate", @@ -2997,7 +3376,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/setTargetTemperature", - "enum": ["heaterShaker/setTargetTemperature"], + "enum": [ + "heaterShaker/setTargetTemperature" + ], "type": "string" }, "params": { @@ -3017,7 +3398,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateHeaterParams": { "title": "DeactivateHeaterParams", @@ -3030,7 +3413,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateHeaterCreate": { "title": "DeactivateHeaterCreate", @@ -3040,7 +3425,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/deactivateHeater", - "enum": ["heaterShaker/deactivateHeater"], + "enum": [ + "heaterShaker/deactivateHeater" + ], "type": "string" }, "params": { @@ -3060,7 +3447,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetAndWaitForShakeSpeedParams": { "title": "SetAndWaitForShakeSpeedParams", @@ -3078,7 +3467,10 @@ "type": "number" } }, - "required": ["moduleId", "rpm"] + "required": [ + "moduleId", + "rpm" + ] }, "SetAndWaitForShakeSpeedCreate": { "title": "SetAndWaitForShakeSpeedCreate", @@ -3088,7 +3480,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/setAndWaitForShakeSpeed", - "enum": ["heaterShaker/setAndWaitForShakeSpeed"], + "enum": [ + "heaterShaker/setAndWaitForShakeSpeed" + ], "type": "string" }, "params": { @@ -3108,7 +3502,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateShakerParams": { "title": "DeactivateShakerParams", @@ -3121,7 +3517,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateShakerCreate": { "title": "DeactivateShakerCreate", @@ -3131,7 +3529,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/deactivateShaker", - "enum": ["heaterShaker/deactivateShaker"], + "enum": [ + "heaterShaker/deactivateShaker" + ], "type": "string" }, "params": { @@ -3151,7 +3551,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "OpenLabwareLatchParams": { "title": "OpenLabwareLatchParams", @@ -3164,7 +3566,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "OpenLabwareLatchCreate": { "title": "OpenLabwareLatchCreate", @@ -3174,7 +3578,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/openLabwareLatch", - "enum": ["heaterShaker/openLabwareLatch"], + "enum": [ + "heaterShaker/openLabwareLatch" + ], "type": "string" }, "params": { @@ -3194,7 +3600,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CloseLabwareLatchParams": { "title": "CloseLabwareLatchParams", @@ -3207,7 +3615,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "CloseLabwareLatchCreate": { "title": "CloseLabwareLatchCreate", @@ -3217,7 +3627,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/closeLabwareLatch", - "enum": ["heaterShaker/closeLabwareLatch"], + "enum": [ + "heaterShaker/closeLabwareLatch" + ], "type": "string" }, "params": { @@ -3237,7 +3649,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DisengageParams": { "title": "DisengageParams", @@ -3250,7 +3664,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DisengageCreate": { "title": "DisengageCreate", @@ -3260,7 +3676,9 @@ "commandType": { "title": "Commandtype", "default": "magneticModule/disengage", - "enum": ["magneticModule/disengage"], + "enum": [ + "magneticModule/disengage" + ], "type": "string" }, "params": { @@ -3280,7 +3698,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "EngageParams": { "title": "EngageParams", @@ -3298,7 +3718,10 @@ "type": "number" } }, - "required": ["moduleId", "height"] + "required": [ + "moduleId", + "height" + ] }, "EngageCreate": { "title": "EngageCreate", @@ -3308,7 +3731,9 @@ "commandType": { "title": "Commandtype", "default": "magneticModule/engage", - "enum": ["magneticModule/engage"], + "enum": [ + "magneticModule/engage" + ], "type": "string" }, "params": { @@ -3328,7 +3753,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__temperature_module__set_target_temperature__SetTargetTemperatureParams": { "title": "SetTargetTemperatureParams", @@ -3346,7 +3773,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "opentrons__protocol_engine__commands__temperature_module__set_target_temperature__SetTargetTemperatureCreate": { "title": "SetTargetTemperatureCreate", @@ -3356,7 +3786,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/setTargetTemperature", - "enum": ["temperatureModule/setTargetTemperature"], + "enum": [ + "temperatureModule/setTargetTemperature" + ], "type": "string" }, "params": { @@ -3376,7 +3808,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__temperature_module__wait_for_temperature__WaitForTemperatureParams": { "title": "WaitForTemperatureParams", @@ -3394,7 +3828,9 @@ "type": "number" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__temperature_module__wait_for_temperature__WaitForTemperatureCreate": { "title": "WaitForTemperatureCreate", @@ -3404,7 +3840,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/waitForTemperature", - "enum": ["temperatureModule/waitForTemperature"], + "enum": [ + "temperatureModule/waitForTemperature" + ], "type": "string" }, "params": { @@ -3424,7 +3862,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateTemperatureParams": { "title": "DeactivateTemperatureParams", @@ -3437,7 +3877,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateTemperatureCreate": { "title": "DeactivateTemperatureCreate", @@ -3447,7 +3889,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/deactivate", - "enum": ["temperatureModule/deactivate"], + "enum": [ + "temperatureModule/deactivate" + ], "type": "string" }, "params": { @@ -3467,7 +3911,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetTargetBlockTemperatureParams": { "title": "SetTargetBlockTemperatureParams", @@ -3495,7 +3941,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "SetTargetBlockTemperatureCreate": { "title": "SetTargetBlockTemperatureCreate", @@ -3505,7 +3954,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/setTargetBlockTemperature", - "enum": ["thermocycler/setTargetBlockTemperature"], + "enum": [ + "thermocycler/setTargetBlockTemperature" + ], "type": "string" }, "params": { @@ -3525,7 +3976,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForBlockTemperatureParams": { "title": "WaitForBlockTemperatureParams", @@ -3538,7 +3991,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "WaitForBlockTemperatureCreate": { "title": "WaitForBlockTemperatureCreate", @@ -3548,7 +4003,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/waitForBlockTemperature", - "enum": ["thermocycler/waitForBlockTemperature"], + "enum": [ + "thermocycler/waitForBlockTemperature" + ], "type": "string" }, "params": { @@ -3568,7 +4025,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetTargetLidTemperatureParams": { "title": "SetTargetLidTemperatureParams", @@ -3586,7 +4045,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "SetTargetLidTemperatureCreate": { "title": "SetTargetLidTemperatureCreate", @@ -3596,7 +4058,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/setTargetLidTemperature", - "enum": ["thermocycler/setTargetLidTemperature"], + "enum": [ + "thermocycler/setTargetLidTemperature" + ], "type": "string" }, "params": { @@ -3616,7 +4080,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForLidTemperatureParams": { "title": "WaitForLidTemperatureParams", @@ -3629,7 +4095,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "WaitForLidTemperatureCreate": { "title": "WaitForLidTemperatureCreate", @@ -3639,7 +4107,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/waitForLidTemperature", - "enum": ["thermocycler/waitForLidTemperature"], + "enum": [ + "thermocycler/waitForLidTemperature" + ], "type": "string" }, "params": { @@ -3659,7 +4129,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateBlockParams": { "title": "DeactivateBlockParams", @@ -3672,7 +4144,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateBlockCreate": { "title": "DeactivateBlockCreate", @@ -3682,7 +4156,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/deactivateBlock", - "enum": ["thermocycler/deactivateBlock"], + "enum": [ + "thermocycler/deactivateBlock" + ], "type": "string" }, "params": { @@ -3702,7 +4178,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateLidParams": { "title": "DeactivateLidParams", @@ -3715,7 +4193,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateLidCreate": { "title": "DeactivateLidCreate", @@ -3725,7 +4205,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/deactivateLid", - "enum": ["thermocycler/deactivateLid"], + "enum": [ + "thermocycler/deactivateLid" + ], "type": "string" }, "params": { @@ -3745,7 +4227,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__thermocycler__open_lid__OpenLidParams": { "title": "OpenLidParams", @@ -3758,7 +4242,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__thermocycler__open_lid__OpenLidCreate": { "title": "OpenLidCreate", @@ -3768,7 +4254,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/openLid", - "enum": ["thermocycler/openLid"], + "enum": [ + "thermocycler/openLid" + ], "type": "string" }, "params": { @@ -3788,7 +4276,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__thermocycler__close_lid__CloseLidParams": { "title": "CloseLidParams", @@ -3801,7 +4291,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__thermocycler__close_lid__CloseLidCreate": { "title": "CloseLidCreate", @@ -3811,7 +4303,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/closeLid", - "enum": ["thermocycler/closeLid"], + "enum": [ + "thermocycler/closeLid" + ], "type": "string" }, "params": { @@ -3831,7 +4325,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "RunProfileStepParams": { "title": "RunProfileStepParams", @@ -3849,7 +4345,10 @@ "type": "number" } }, - "required": ["celsius", "holdSeconds"] + "required": [ + "celsius", + "holdSeconds" + ] }, "RunProfileParams": { "title": "RunProfileParams", @@ -3875,7 +4374,10 @@ "type": "number" } }, - "required": ["moduleId", "profile"] + "required": [ + "moduleId", + "profile" + ] }, "RunProfileCreate": { "title": "RunProfileCreate", @@ -3885,7 +4387,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/runProfile", - "enum": ["thermocycler/runProfile"], + "enum": [ + "thermocycler/runProfile" + ], "type": "string" }, "params": { @@ -3905,7 +4409,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__close_lid__CloseLidParams": { "title": "CloseLidParams", @@ -3918,7 +4424,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__close_lid__CloseLidCreate": { "title": "CloseLidCreate", @@ -3928,7 +4436,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/closeLid", - "enum": ["absorbanceReader/closeLid"], + "enum": [ + "absorbanceReader/closeLid" + ], "type": "string" }, "params": { @@ -3948,7 +4458,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__open_lid__OpenLidParams": { "title": "OpenLidParams", @@ -3961,7 +4473,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__open_lid__OpenLidCreate": { "title": "OpenLidCreate", @@ -3971,7 +4485,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/openLid", - "enum": ["absorbanceReader/openLid"], + "enum": [ + "absorbanceReader/openLid" + ], "type": "string" }, "params": { @@ -3991,7 +4507,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "InitializeParams": { "title": "InitializeParams", @@ -4006,7 +4524,10 @@ "measureMode": { "title": "Measuremode", "description": "Initialize single or multi measurement mode.", - "enum": ["single", "multi"], + "enum": [ + "single", + "multi" + ], "type": "string" }, "sampleWavelengths": { @@ -4023,7 +4544,11 @@ "type": "integer" } }, - "required": ["moduleId", "measureMode", "sampleWavelengths"] + "required": [ + "moduleId", + "measureMode", + "sampleWavelengths" + ] }, "InitializeCreate": { "title": "InitializeCreate", @@ -4033,7 +4558,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/initialize", - "enum": ["absorbanceReader/initialize"], + "enum": [ + "absorbanceReader/initialize" + ], "type": "string" }, "params": { @@ -4053,7 +4580,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ReadAbsorbanceParams": { "title": "ReadAbsorbanceParams", @@ -4066,7 +4595,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "ReadAbsorbanceCreate": { "title": "ReadAbsorbanceCreate", @@ -4076,7 +4607,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/read", - "enum": ["absorbanceReader/read"], + "enum": [ + "absorbanceReader/read" + ], "type": "string" }, "params": { @@ -4096,12 +4629,17 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibrateGripperParamsJaw": { "title": "CalibrateGripperParamsJaw", "description": "An enumeration.", - "enum": ["front", "rear"] + "enum": [ + "front", + "rear" + ] }, "Vec3f": { "title": "Vec3f", @@ -4121,7 +4659,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "CalibrateGripperParams": { "title": "CalibrateGripperParams", @@ -4146,7 +4688,9 @@ ] } }, - "required": ["jaw"] + "required": [ + "jaw" + ] }, "CalibrateGripperCreate": { "title": "CalibrateGripperCreate", @@ -4156,7 +4700,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibrateGripper", - "enum": ["calibration/calibrateGripper"], + "enum": [ + "calibration/calibrateGripper" + ], "type": "string" }, "params": { @@ -4176,7 +4722,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibratePipetteParams": { "title": "CalibratePipetteParams", @@ -4192,7 +4740,9 @@ ] } }, - "required": ["mount"] + "required": [ + "mount" + ] }, "CalibratePipetteCreate": { "title": "CalibratePipetteCreate", @@ -4202,7 +4752,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibratePipette", - "enum": ["calibration/calibratePipette"], + "enum": [ + "calibration/calibratePipette" + ], "type": "string" }, "params": { @@ -4222,7 +4774,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibrateModuleParams": { "title": "CalibrateModuleParams", @@ -4248,7 +4802,11 @@ ] } }, - "required": ["moduleId", "labwareId", "mount"] + "required": [ + "moduleId", + "labwareId", + "mount" + ] }, "CalibrateModuleCreate": { "title": "CalibrateModuleCreate", @@ -4258,7 +4816,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibrateModule", - "enum": ["calibration/calibrateModule"], + "enum": [ + "calibration/calibrateModule" + ], "type": "string" }, "params": { @@ -4278,12 +4838,17 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MaintenancePosition": { "title": "MaintenancePosition", "description": "Maintenance position options.", - "enum": ["attachPlate", "attachInstrument"] + "enum": [ + "attachPlate", + "attachInstrument" + ] }, "MoveToMaintenancePositionParams": { "title": "MoveToMaintenancePositionParams", @@ -4308,7 +4873,9 @@ ] } }, - "required": ["mount"] + "required": [ + "mount" + ] }, "MoveToMaintenancePositionCreate": { "title": "MoveToMaintenancePositionCreate", @@ -4318,7 +4885,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/moveToMaintenancePosition", - "enum": ["calibration/moveToMaintenancePosition"], + "enum": [ + "calibration/moveToMaintenancePosition" + ], "type": "string" }, "params": { @@ -4338,7 +4907,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeBlowOutInPlaceParams": { "title": "UnsafeBlowOutInPlaceParams", @@ -4357,7 +4928,10 @@ "type": "string" } }, - "required": ["flowRate", "pipetteId"] + "required": [ + "flowRate", + "pipetteId" + ] }, "UnsafeBlowOutInPlaceCreate": { "title": "UnsafeBlowOutInPlaceCreate", @@ -4367,7 +4941,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/blowOutInPlace", - "enum": ["unsafe/blowOutInPlace"], + "enum": [ + "unsafe/blowOutInPlace" + ], "type": "string" }, "params": { @@ -4387,7 +4963,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeDropTipInPlaceParams": { "title": "UnsafeDropTipInPlaceParams", @@ -4405,7 +4983,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "UnsafeDropTipInPlaceCreate": { "title": "UnsafeDropTipInPlaceCreate", @@ -4415,7 +4995,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/dropTipInPlace", - "enum": ["unsafe/dropTipInPlace"], + "enum": [ + "unsafe/dropTipInPlace" + ], "type": "string" }, "params": { @@ -4435,7 +5017,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UpdatePositionEstimatorsParams": { "title": "UpdatePositionEstimatorsParams", @@ -4450,7 +5034,9 @@ } } }, - "required": ["axes"] + "required": [ + "axes" + ] }, "UpdatePositionEstimatorsCreate": { "title": "UpdatePositionEstimatorsCreate", @@ -4460,7 +5046,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/updatePositionEstimators", - "enum": ["unsafe/updatePositionEstimators"], + "enum": [ + "unsafe/updatePositionEstimators" + ], "type": "string" }, "params": { @@ -4480,7 +5068,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeEngageAxesParams": { "title": "UnsafeEngageAxesParams", @@ -4495,7 +5085,9 @@ } } }, - "required": ["axes"] + "required": [ + "axes" + ] }, "UnsafeEngageAxesCreate": { "title": "UnsafeEngageAxesCreate", @@ -4505,7 +5097,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/engageAxes", - "enum": ["unsafe/engageAxes"], + "enum": [ + "unsafe/engageAxes" + ], "type": "string" }, "params": { @@ -4525,7 +5119,49 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] + }, + "UnsafeUngripLabwareParams": { + "title": "UnsafeUngripLabwareParams", + "description": "Payload required for an UngripLabware command.", + "type": "object", + "properties": {} + }, + "UnsafeUngripLabwareCreate": { + "title": "UnsafeUngripLabwareCreate", + "description": "UnsafeEngageAxes command request model.", + "type": "object", + "properties": { + "commandType": { + "title": "Commandtype", + "default": "unsafe/ungripLabware", + "enum": [ + "unsafe/ungripLabware" + ], + "type": "string" + }, + "params": { + "$ref": "#/definitions/UnsafeUngripLabwareParams" + }, + "intent": { + "description": "The reason the command was added. If not specified or `protocol`, the command will be treated as part of the protocol run itself, and added to the end of the existing command queue.\n\nIf `setup`, the command will be treated as part of run setup. A setup command may only be enqueued if the run has not started.\n\nUse setup commands for activities like pre-run calibration checks and module setup, like pre-heating.", + "allOf": [ + { + "$ref": "#/definitions/CommandIntent" + } + ] + }, + "key": { + "title": "Key", + "description": "A key value, unique in this run, that can be used to track the same logical command across multiple runs of the same protocol. If a value is not provided, one will be generated.", + "type": "string" + } + }, + "required": [ + "params" + ] } }, "$id": "opentronsCommandSchemaV9",