From 02972722fdfc5c2230370f7ea8dd359fc4ee8048 Mon Sep 17 00:00:00 2001 From: Laura Cox Date: Thu, 7 Nov 2024 00:07:03 +0200 Subject: [PATCH] add additional commands to schema 11 --- shared-data/command/schemas/11.json | 1262 +++++++++++++++++++++------ 1 file changed, 990 insertions(+), 272 deletions(-) diff --git a/shared-data/command/schemas/11.json b/shared-data/command/schemas/11.json index 0340e4a1cc11..4ee7e930abef 100644 --- a/shared-data/command/schemas/11.json +++ b/shared-data/command/schemas/11.json @@ -4,6 +4,7 @@ "discriminator": { "propertyName": "commandType", "mapping": { + "airGapInPlace": "#/definitions/AirGapInPlaceCreate", "aspirate": "#/definitions/AspirateCreate", "aspirateInPlace": "#/definitions/AspirateInPlaceCreate", "comment": "#/definitions/CommentCreate", @@ -84,6 +85,9 @@ } }, "oneOf": [ + { + "$ref": "#/definitions/AirGapInPlaceCreate" + }, { "$ref": "#/definitions/AspirateCreate" }, @@ -314,10 +318,88 @@ } ], "definitions": { + "AirGapInPlaceParams": { + "title": "AirGapInPlaceParams", + "description": "Payload required to air gap in place.", + "type": "object", + "properties": { + "flowRate": { + "title": "Flowrate", + "description": "Speed in \u00b5L/s configured for the pipette", + "exclusiveMinimum": 0, + "type": "number" + }, + "volume": { + "title": "Volume", + "description": "The amount of liquid to aspirate, in \u00b5L. Must not be greater than the remaining available amount, which depends on the pipette (see `loadPipette`), its configuration (see `configureForVolume`), the tip (see `pickUpTip`), and the amount you've aspirated so far. There is some tolerance for floating point rounding errors.", + "minimum": 0, + "type": "number" + }, + "pipetteId": { + "title": "Pipetteid", + "description": "Identifier of pipette to use for liquid handling.", + "type": "string" + } + }, + "required": [ + "flowRate", + "volume", + "pipetteId" + ] + }, + "CommandIntent": { + "title": "CommandIntent", + "description": "Run intent for a given command.\n\nProps:\n PROTOCOL: the command is part of the protocol run itself.\n SETUP: the command is part of the setup phase of a run.", + "enum": [ + "protocol", + "setup", + "fixit" + ], + "type": "string" + }, + "AirGapInPlaceCreate": { + "title": "AirGapInPlaceCreate", + "description": "AirGapInPlace command request model.", + "type": "object", + "properties": { + "commandType": { + "title": "Commandtype", + "default": "airGapInPlace", + "enum": [ + "airGapInPlace" + ], + "type": "string" + }, + "params": { + "$ref": "#/definitions/AirGapInPlaceParams" + }, + "intent": { + "description": "The reason the command was added. If not specified or `protocol`, the command will be treated as part of the protocol run itself, and added to the end of the existing command queue.\n\nIf `setup`, the command will be treated as part of run setup. A setup command may only be enqueued if the run has not started.\n\nUse setup commands for activities like pre-run calibration checks and module setup, like pre-heating.", + "allOf": [ + { + "$ref": "#/definitions/CommandIntent" + } + ] + }, + "key": { + "title": "Key", + "description": "A key value, unique in this run, that can be used to track the same logical command across multiple runs of the same protocol. If a value is not provided, one will be generated.", + "type": "string" + } + }, + "required": [ + "params" + ] + }, "WellOrigin": { "title": "WellOrigin", "description": "Origin of WellLocation offset.\n\nProps:\n TOP: the top-center of the well\n BOTTOM: the bottom-center of the well\n CENTER: the middle-center of the well\n MENISCUS: the meniscus-center of the well", - "enum": ["top", "bottom", "center", "meniscus"], + "enum": [ + "top", + "bottom", + "center", + "meniscus" + ], "type": "string" }, "WellOffset": { @@ -367,7 +449,9 @@ "type": "number" }, { - "enum": ["operationVolume"], + "enum": [ + "operationVolume" + ], "type": "string" } ] @@ -416,13 +500,13 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "flowRate", "volume", "pipetteId"] - }, - "CommandIntent": { - "title": "CommandIntent", - "description": "Run intent for a given command.\n\nProps:\n PROTOCOL: the command is part of the protocol run itself.\n SETUP: the command is part of the setup phase of a run.", - "enum": ["protocol", "setup", "fixit"], - "type": "string" + "required": [ + "labwareId", + "wellName", + "flowRate", + "volume", + "pipetteId" + ] }, "AspirateCreate": { "title": "AspirateCreate", @@ -432,7 +516,9 @@ "commandType": { "title": "Commandtype", "default": "aspirate", - "enum": ["aspirate"], + "enum": [ + "aspirate" + ], "type": "string" }, "params": { @@ -452,7 +538,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AspirateInPlaceParams": { "title": "AspirateInPlaceParams", @@ -477,7 +565,11 @@ "type": "string" } }, - "required": ["flowRate", "volume", "pipetteId"] + "required": [ + "flowRate", + "volume", + "pipetteId" + ] }, "AspirateInPlaceCreate": { "title": "AspirateInPlaceCreate", @@ -487,7 +579,9 @@ "commandType": { "title": "Commandtype", "default": "aspirateInPlace", - "enum": ["aspirateInPlace"], + "enum": [ + "aspirateInPlace" + ], "type": "string" }, "params": { @@ -507,7 +601,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CommentParams": { "title": "CommentParams", @@ -520,7 +616,9 @@ "type": "string" } }, - "required": ["message"] + "required": [ + "message" + ] }, "CommentCreate": { "title": "CommentCreate", @@ -530,7 +628,9 @@ "commandType": { "title": "Commandtype", "default": "comment", - "enum": ["comment"], + "enum": [ + "comment" + ], "type": "string" }, "params": { @@ -550,7 +650,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ConfigureForVolumeParams": { "title": "ConfigureForVolumeParams", @@ -574,7 +676,10 @@ "type": "string" } }, - "required": ["pipetteId", "volume"] + "required": [ + "pipetteId", + "volume" + ] }, "ConfigureForVolumeCreate": { "title": "ConfigureForVolumeCreate", @@ -584,7 +689,9 @@ "commandType": { "title": "Commandtype", "default": "configureForVolume", - "enum": ["configureForVolume"], + "enum": [ + "configureForVolume" + ], "type": "string" }, "params": { @@ -604,7 +711,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AllNozzleLayoutConfiguration": { "title": "AllNozzleLayoutConfiguration", @@ -614,7 +723,9 @@ "style": { "title": "Style", "default": "ALL", - "enum": ["ALL"], + "enum": [ + "ALL" + ], "type": "string" } } @@ -627,17 +738,26 @@ "style": { "title": "Style", "default": "SINGLE", - "enum": ["SINGLE"], + "enum": [ + "SINGLE" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "RowNozzleLayoutConfiguration": { "title": "RowNozzleLayoutConfiguration", @@ -647,17 +767,26 @@ "style": { "title": "Style", "default": "ROW", - "enum": ["ROW"], + "enum": [ + "ROW" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "ColumnNozzleLayoutConfiguration": { "title": "ColumnNozzleLayoutConfiguration", @@ -667,17 +796,26 @@ "style": { "title": "Style", "default": "COLUMN", - "enum": ["COLUMN"], + "enum": [ + "COLUMN" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" } }, - "required": ["primaryNozzle"] + "required": [ + "primaryNozzle" + ] }, "QuadrantNozzleLayoutConfiguration": { "title": "QuadrantNozzleLayoutConfiguration", @@ -687,13 +825,20 @@ "style": { "title": "Style", "default": "QUADRANT", - "enum": ["QUADRANT"], + "enum": [ + "QUADRANT" + ], "type": "string" }, "primaryNozzle": { "title": "Primarynozzle", "description": "The primary nozzle to use in the layout configuration. This nozzle will update the critical point of the current pipette. For now, this is also the back left corner of your rectangle.", - "enum": ["A1", "H1", "A12", "H12"], + "enum": [ + "A1", + "H1", + "A12", + "H12" + ], "type": "string" }, "frontRightNozzle": { @@ -709,7 +854,11 @@ "type": "string" } }, - "required": ["primaryNozzle", "frontRightNozzle", "backLeftNozzle"] + "required": [ + "primaryNozzle", + "frontRightNozzle", + "backLeftNozzle" + ] }, "ConfigureNozzleLayoutParams": { "title": "ConfigureNozzleLayoutParams", @@ -742,7 +891,10 @@ ] } }, - "required": ["pipetteId", "configurationParams"] + "required": [ + "pipetteId", + "configurationParams" + ] }, "ConfigureNozzleLayoutCreate": { "title": "ConfigureNozzleLayoutCreate", @@ -752,7 +904,9 @@ "commandType": { "title": "Commandtype", "default": "configureNozzleLayout", - "enum": ["configureNozzleLayout"], + "enum": [ + "configureNozzleLayout" + ], "type": "string" }, "params": { @@ -772,7 +926,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CustomParams": { "title": "CustomParams", @@ -788,7 +944,9 @@ "commandType": { "title": "Commandtype", "default": "custom", - "enum": ["custom"], + "enum": [ + "custom" + ], "type": "string" }, "params": { @@ -808,7 +966,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DispenseParams": { "title": "DispenseParams", @@ -857,7 +1017,13 @@ "type": "number" } }, - "required": ["labwareId", "wellName", "flowRate", "volume", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "flowRate", + "volume", + "pipetteId" + ] }, "DispenseCreate": { "title": "DispenseCreate", @@ -867,7 +1033,9 @@ "commandType": { "title": "Commandtype", "default": "dispense", - "enum": ["dispense"], + "enum": [ + "dispense" + ], "type": "string" }, "params": { @@ -887,7 +1055,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DispenseInPlaceParams": { "title": "DispenseInPlaceParams", @@ -917,7 +1087,11 @@ "type": "number" } }, - "required": ["flowRate", "volume", "pipetteId"] + "required": [ + "flowRate", + "volume", + "pipetteId" + ] }, "DispenseInPlaceCreate": { "title": "DispenseInPlaceCreate", @@ -927,7 +1101,9 @@ "commandType": { "title": "Commandtype", "default": "dispenseInPlace", - "enum": ["dispenseInPlace"], + "enum": [ + "dispenseInPlace" + ], "type": "string" }, "params": { @@ -947,7 +1123,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WellLocation": { "title": "WellLocation", @@ -1009,7 +1187,12 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "flowRate", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "flowRate", + "pipetteId" + ] }, "BlowOutCreate": { "title": "BlowOutCreate", @@ -1019,7 +1202,9 @@ "commandType": { "title": "Commandtype", "default": "blowout", - "enum": ["blowout"], + "enum": [ + "blowout" + ], "type": "string" }, "params": { @@ -1039,7 +1224,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "BlowOutInPlaceParams": { "title": "BlowOutInPlaceParams", @@ -1058,7 +1245,10 @@ "type": "string" } }, - "required": ["flowRate", "pipetteId"] + "required": [ + "flowRate", + "pipetteId" + ] }, "BlowOutInPlaceCreate": { "title": "BlowOutInPlaceCreate", @@ -1068,7 +1258,9 @@ "commandType": { "title": "Commandtype", "default": "blowOutInPlace", - "enum": ["blowOutInPlace"], + "enum": [ + "blowOutInPlace" + ], "type": "string" }, "params": { @@ -1088,12 +1280,19 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DropTipWellOrigin": { "title": "DropTipWellOrigin", "description": "The origin of a DropTipWellLocation offset.\n\nProps:\n TOP: the top-center of the well\n BOTTOM: the bottom-center of the well\n CENTER: the middle-center of the well\n DEFAULT: the default drop-tip location of the well,\n based on pipette configuration and length of the tip.", - "enum": ["top", "bottom", "center", "default"], + "enum": [ + "top", + "bottom", + "center", + "default" + ], "type": "string" }, "DropTipWellLocation": { @@ -1155,7 +1354,11 @@ "type": "boolean" } }, - "required": ["pipetteId", "labwareId", "wellName"] + "required": [ + "pipetteId", + "labwareId", + "wellName" + ] }, "DropTipCreate": { "title": "DropTipCreate", @@ -1165,7 +1368,9 @@ "commandType": { "title": "Commandtype", "default": "dropTip", - "enum": ["dropTip"], + "enum": [ + "dropTip" + ], "type": "string" }, "params": { @@ -1185,7 +1390,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DropTipInPlaceParams": { "title": "DropTipInPlaceParams", @@ -1203,7 +1410,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "DropTipInPlaceCreate": { "title": "DropTipInPlaceCreate", @@ -1213,7 +1422,9 @@ "commandType": { "title": "Commandtype", "default": "dropTipInPlace", - "enum": ["dropTipInPlace"], + "enum": [ + "dropTipInPlace" + ], "type": "string" }, "params": { @@ -1233,7 +1444,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MotorAxis": { "title": "MotorAxis", @@ -1254,7 +1467,11 @@ "MountType": { "title": "MountType", "description": "An enumeration.", - "enum": ["left", "right", "extension"], + "enum": [ + "left", + "right", + "extension" + ], "type": "string" }, "HomeParams": { @@ -1287,7 +1504,9 @@ "commandType": { "title": "Commandtype", "default": "home", - "enum": ["home"], + "enum": [ + "home" + ], "type": "string" }, "params": { @@ -1307,7 +1526,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "RetractAxisParams": { "title": "RetractAxisParams", @@ -1323,7 +1544,9 @@ ] } }, - "required": ["axis"] + "required": [ + "axis" + ] }, "RetractAxisCreate": { "title": "RetractAxisCreate", @@ -1333,7 +1556,9 @@ "commandType": { "title": "Commandtype", "default": "retractAxis", - "enum": ["retractAxis"], + "enum": [ + "retractAxis" + ], "type": "string" }, "params": { @@ -1353,7 +1578,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeckSlotName": { "title": "DeckSlotName", @@ -1399,7 +1626,9 @@ ] } }, - "required": ["slotName"] + "required": [ + "slotName" + ] }, "ModuleLocation": { "title": "ModuleLocation", @@ -1412,7 +1641,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "OnLabwareLocation": { "title": "OnLabwareLocation", @@ -1425,7 +1656,9 @@ "type": "string" } }, - "required": ["labwareId"] + "required": [ + "labwareId" + ] }, "AddressableAreaLocation": { "title": "AddressableAreaLocation", @@ -1438,7 +1671,9 @@ "type": "string" } }, - "required": ["addressableAreaName"] + "required": [ + "addressableAreaName" + ] }, "LoadLabwareParams": { "title": "LoadLabwareParams", @@ -1459,7 +1694,9 @@ "$ref": "#/definitions/OnLabwareLocation" }, { - "enum": ["offDeck"], + "enum": [ + "offDeck" + ], "type": "string" }, { @@ -1493,7 +1730,12 @@ "type": "string" } }, - "required": ["location", "loadName", "namespace", "version"] + "required": [ + "location", + "loadName", + "namespace", + "version" + ] }, "LoadLabwareCreate": { "title": "LoadLabwareCreate", @@ -1503,7 +1745,9 @@ "commandType": { "title": "Commandtype", "default": "loadLabware", - "enum": ["loadLabware"], + "enum": [ + "loadLabware" + ], "type": "string" }, "params": { @@ -1523,7 +1767,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ReloadLabwareParams": { "title": "ReloadLabwareParams", @@ -1536,7 +1782,9 @@ "type": "string" } }, - "required": ["labwareId"] + "required": [ + "labwareId" + ] }, "ReloadLabwareCreate": { "title": "ReloadLabwareCreate", @@ -1546,7 +1794,9 @@ "commandType": { "title": "Commandtype", "default": "reloadLabware", - "enum": ["reloadLabware"], + "enum": [ + "reloadLabware" + ], "type": "string" }, "params": { @@ -1566,7 +1816,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LoadLiquidParams": { "title": "LoadLiquidParams", @@ -1575,8 +1827,18 @@ "properties": { "liquidId": { "title": "Liquidid", - "description": "Unique identifier of the liquid to load.", - "type": "string" + "description": "Unique identifier of the liquid to load. If this is the sentinel value EMPTY, all values of volumeByWell must be 0.", + "anyOf": [ + { + "type": "string" + }, + { + "enum": [ + "EMPTY" + ], + "type": "string" + } + ] }, "labwareId": { "title": "Labwareid", @@ -1585,14 +1847,18 @@ }, "volumeByWell": { "title": "Volumebywell", - "description": "Volume of liquid, in \u00b5L, loaded into each well by name, in this labware.", + "description": "Volume of liquid, in \u00b5L, loaded into each well by name, in this labware. If the liquid id is the sentinel value EMPTY, all volumes must be 0.", "type": "object", "additionalProperties": { "type": "number" } } }, - "required": ["liquidId", "labwareId", "volumeByWell"] + "required": [ + "liquidId", + "labwareId", + "volumeByWell" + ] }, "LoadLiquidCreate": { "title": "LoadLiquidCreate", @@ -1602,7 +1868,9 @@ "commandType": { "title": "Commandtype", "default": "loadLiquid", - "enum": ["loadLiquid"], + "enum": [ + "loadLiquid" + ], "type": "string" }, "params": { @@ -1622,7 +1890,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ModuleModel": { "title": "ModuleModel", @@ -1668,7 +1938,10 @@ "type": "string" } }, - "required": ["model", "location"] + "required": [ + "model", + "location" + ] }, "LoadModuleCreate": { "title": "LoadModuleCreate", @@ -1678,7 +1951,9 @@ "commandType": { "title": "Commandtype", "default": "loadModule", - "enum": ["loadModule"], + "enum": [ + "loadModule" + ], "type": "string" }, "params": { @@ -1698,7 +1973,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PipetteNameType": { "title": "PipetteNameType", @@ -1761,7 +2038,10 @@ "type": "boolean" } }, - "required": ["pipetteName", "mount"] + "required": [ + "pipetteName", + "mount" + ] }, "LoadPipetteCreate": { "title": "LoadPipetteCreate", @@ -1771,7 +2051,9 @@ "commandType": { "title": "Commandtype", "default": "loadPipette", - "enum": ["loadPipette"], + "enum": [ + "loadPipette" + ], "type": "string" }, "params": { @@ -1791,12 +2073,18 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LabwareMovementStrategy": { "title": "LabwareMovementStrategy", "description": "Strategy to use for labware movement.", - "enum": ["usingGripper", "manualMoveWithPause", "manualMoveWithoutPause"], + "enum": [ + "usingGripper", + "manualMoveWithPause", + "manualMoveWithoutPause" + ], "type": "string" }, "LabwareOffsetVector": { @@ -1817,7 +2105,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveLabwareParams": { "title": "MoveLabwareParams", @@ -1843,7 +2135,9 @@ "$ref": "#/definitions/OnLabwareLocation" }, { - "enum": ["offDeck"], + "enum": [ + "offDeck" + ], "type": "string" }, { @@ -1878,7 +2172,11 @@ ] } }, - "required": ["labwareId", "newLocation", "strategy"] + "required": [ + "labwareId", + "newLocation", + "strategy" + ] }, "MoveLabwareCreate": { "title": "MoveLabwareCreate", @@ -1888,7 +2186,9 @@ "commandType": { "title": "Commandtype", "default": "moveLabware", - "enum": ["moveLabware"], + "enum": [ + "moveLabware" + ], "type": "string" }, "params": { @@ -1908,12 +2208,18 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MovementAxis": { "title": "MovementAxis", "description": "Axis on which to issue a relative movement.", - "enum": ["x", "y", "z"], + "enum": [ + "x", + "y", + "z" + ], "type": "string" }, "MoveRelativeParams": { @@ -1940,7 +2246,11 @@ "type": "number" } }, - "required": ["pipetteId", "axis", "distance"] + "required": [ + "pipetteId", + "axis", + "distance" + ] }, "MoveRelativeCreate": { "title": "MoveRelativeCreate", @@ -1950,7 +2260,9 @@ "commandType": { "title": "Commandtype", "default": "moveRelative", - "enum": ["moveRelative"], + "enum": [ + "moveRelative" + ], "type": "string" }, "params": { @@ -1970,7 +2282,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeckPoint": { "title": "DeckPoint", @@ -1990,7 +2304,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveToCoordinatesParams": { "title": "MoveToCoordinatesParams", @@ -2028,7 +2346,10 @@ ] } }, - "required": ["pipetteId", "coordinates"] + "required": [ + "pipetteId", + "coordinates" + ] }, "MoveToCoordinatesCreate": { "title": "MoveToCoordinatesCreate", @@ -2038,7 +2359,9 @@ "commandType": { "title": "Commandtype", "default": "moveToCoordinates", - "enum": ["moveToCoordinates"], + "enum": [ + "moveToCoordinates" + ], "type": "string" }, "params": { @@ -2058,7 +2381,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveToWellParams": { "title": "MoveToWellParams", @@ -2106,7 +2431,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "MoveToWellCreate": { "title": "MoveToWellCreate", @@ -2116,7 +2445,9 @@ "commandType": { "title": "Commandtype", "default": "moveToWell", - "enum": ["moveToWell"], + "enum": [ + "moveToWell" + ], "type": "string" }, "params": { @@ -2136,7 +2467,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "AddressableOffsetVector": { "title": "AddressableOffsetVector", @@ -2156,7 +2489,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "MoveToAddressableAreaParams": { "title": "MoveToAddressableAreaParams", @@ -2210,7 +2547,10 @@ "type": "boolean" } }, - "required": ["pipetteId", "addressableAreaName"] + "required": [ + "pipetteId", + "addressableAreaName" + ] }, "MoveToAddressableAreaCreate": { "title": "MoveToAddressableAreaCreate", @@ -2220,7 +2560,9 @@ "commandType": { "title": "Commandtype", "default": "moveToAddressableArea", - "enum": ["moveToAddressableArea"], + "enum": [ + "moveToAddressableArea" + ], "type": "string" }, "params": { @@ -2240,7 +2582,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveToAddressableAreaForDropTipParams": { "title": "MoveToAddressableAreaForDropTipParams", @@ -2300,7 +2644,10 @@ "type": "boolean" } }, - "required": ["pipetteId", "addressableAreaName"] + "required": [ + "pipetteId", + "addressableAreaName" + ] }, "MoveToAddressableAreaForDropTipCreate": { "title": "MoveToAddressableAreaForDropTipCreate", @@ -2310,7 +2657,9 @@ "commandType": { "title": "Commandtype", "default": "moveToAddressableAreaForDropTip", - "enum": ["moveToAddressableAreaForDropTip"], + "enum": [ + "moveToAddressableAreaForDropTip" + ], "type": "string" }, "params": { @@ -2330,7 +2679,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PrepareToAspirateParams": { "title": "PrepareToAspirateParams", @@ -2343,7 +2694,9 @@ "type": "string" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "PrepareToAspirateCreate": { "title": "PrepareToAspirateCreate", @@ -2353,7 +2706,9 @@ "commandType": { "title": "Commandtype", "default": "prepareToAspirate", - "enum": ["prepareToAspirate"], + "enum": [ + "prepareToAspirate" + ], "type": "string" }, "params": { @@ -2373,7 +2728,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForResumeParams": { "title": "WaitForResumeParams", @@ -2395,7 +2752,10 @@ "commandType": { "title": "Commandtype", "default": "waitForResume", - "enum": ["waitForResume", "pause"], + "enum": [ + "waitForResume", + "pause" + ], "type": "string" }, "params": { @@ -2415,7 +2775,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForDurationParams": { "title": "WaitForDurationParams", @@ -2433,7 +2795,9 @@ "type": "string" } }, - "required": ["seconds"] + "required": [ + "seconds" + ] }, "WaitForDurationCreate": { "title": "WaitForDurationCreate", @@ -2443,7 +2807,9 @@ "commandType": { "title": "Commandtype", "default": "waitForDuration", - "enum": ["waitForDuration"], + "enum": [ + "waitForDuration" + ], "type": "string" }, "params": { @@ -2463,12 +2829,18 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "PickUpTipWellOrigin": { "title": "PickUpTipWellOrigin", "description": "The origin of a PickUpTipWellLocation offset.\n\nProps:\n TOP: the top-center of the well\n BOTTOM: the bottom-center of the well\n CENTER: the middle-center of the well", - "enum": ["top", "bottom", "center"], + "enum": [ + "top", + "bottom", + "center" + ], "type": "string" }, "PickUpTipWellLocation": { @@ -2519,7 +2891,11 @@ ] } }, - "required": ["pipetteId", "labwareId", "wellName"] + "required": [ + "pipetteId", + "labwareId", + "wellName" + ] }, "PickUpTipCreate": { "title": "PickUpTipCreate", @@ -2529,7 +2905,9 @@ "commandType": { "title": "Commandtype", "default": "pickUpTip", - "enum": ["pickUpTip"], + "enum": [ + "pickUpTip" + ], "type": "string" }, "params": { @@ -2549,7 +2927,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SavePositionParams": { "title": "SavePositionParams", @@ -2573,7 +2953,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "SavePositionCreate": { "title": "SavePositionCreate", @@ -2583,7 +2965,9 @@ "commandType": { "title": "Commandtype", "default": "savePosition", - "enum": ["savePosition"], + "enum": [ + "savePosition" + ], "type": "string" }, "params": { @@ -2603,7 +2987,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetRailLightsParams": { "title": "SetRailLightsParams", @@ -2616,7 +3002,9 @@ "type": "boolean" } }, - "required": ["on"] + "required": [ + "on" + ] }, "SetRailLightsCreate": { "title": "SetRailLightsCreate", @@ -2626,7 +3014,9 @@ "commandType": { "title": "Commandtype", "default": "setRailLights", - "enum": ["setRailLights"], + "enum": [ + "setRailLights" + ], "type": "string" }, "params": { @@ -2646,7 +3036,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TouchTipParams": { "title": "TouchTipParams", @@ -2689,7 +3081,11 @@ "type": "number" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "TouchTipCreate": { "title": "TouchTipCreate", @@ -2699,7 +3095,9 @@ "commandType": { "title": "Commandtype", "default": "touchTip", - "enum": ["touchTip"], + "enum": [ + "touchTip" + ], "type": "string" }, "params": { @@ -2719,12 +3117,20 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "StatusBarAnimation": { "title": "StatusBarAnimation", "description": "Status Bar animation options.", - "enum": ["idle", "confirm", "updating", "disco", "off"] + "enum": [ + "idle", + "confirm", + "updating", + "disco", + "off" + ] }, "SetStatusBarParams": { "title": "SetStatusBarParams", @@ -2740,7 +3146,9 @@ ] } }, - "required": ["animation"] + "required": [ + "animation" + ] }, "SetStatusBarCreate": { "title": "SetStatusBarCreate", @@ -2750,7 +3158,9 @@ "commandType": { "title": "Commandtype", "default": "setStatusBar", - "enum": ["setStatusBar"], + "enum": [ + "setStatusBar" + ], "type": "string" }, "params": { @@ -2770,18 +3180,28 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TipPresenceStatus": { "title": "TipPresenceStatus", "description": "Tip presence status reported by a pipette.", - "enum": ["present", "absent", "unknown"], + "enum": [ + "present", + "absent", + "unknown" + ], "type": "string" }, "InstrumentSensorId": { "title": "InstrumentSensorId", "description": "Primary and secondary sensor ids.", - "enum": ["primary", "secondary", "both"], + "enum": [ + "primary", + "secondary", + "both" + ], "type": "string" }, "VerifyTipPresenceParams": { @@ -2811,7 +3231,10 @@ ] } }, - "required": ["pipetteId", "expectedState"] + "required": [ + "pipetteId", + "expectedState" + ] }, "VerifyTipPresenceCreate": { "title": "VerifyTipPresenceCreate", @@ -2821,7 +3244,9 @@ "commandType": { "title": "Commandtype", "default": "verifyTipPresence", - "enum": ["verifyTipPresence"], + "enum": [ + "verifyTipPresence" + ], "type": "string" }, "params": { @@ -2841,7 +3266,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "GetTipPresenceParams": { "title": "GetTipPresenceParams", @@ -2854,7 +3281,9 @@ "type": "string" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "GetTipPresenceCreate": { "title": "GetTipPresenceCreate", @@ -2864,7 +3293,9 @@ "commandType": { "title": "Commandtype", "default": "getTipPresence", - "enum": ["getTipPresence"], + "enum": [ + "getTipPresence" + ], "type": "string" }, "params": { @@ -2884,7 +3315,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "LiquidProbeParams": { "title": "LiquidProbeParams", @@ -2916,7 +3349,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "LiquidProbeCreate": { "title": "LiquidProbeCreate", @@ -2926,7 +3363,9 @@ "commandType": { "title": "Commandtype", "default": "liquidProbe", - "enum": ["liquidProbe"], + "enum": [ + "liquidProbe" + ], "type": "string" }, "params": { @@ -2946,7 +3385,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "TryLiquidProbeParams": { "title": "TryLiquidProbeParams", @@ -2978,7 +3419,11 @@ "type": "string" } }, - "required": ["labwareId", "wellName", "pipetteId"] + "required": [ + "labwareId", + "wellName", + "pipetteId" + ] }, "TryLiquidProbeCreate": { "title": "TryLiquidProbeCreate", @@ -2988,7 +3433,9 @@ "commandType": { "title": "Commandtype", "default": "tryLiquidProbe", - "enum": ["tryLiquidProbe"], + "enum": [ + "tryLiquidProbe" + ], "type": "string" }, "params": { @@ -3008,7 +3455,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__heater_shaker__wait_for_temperature__WaitForTemperatureParams": { "title": "WaitForTemperatureParams", @@ -3026,7 +3475,9 @@ "type": "number" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__heater_shaker__wait_for_temperature__WaitForTemperatureCreate": { "title": "WaitForTemperatureCreate", @@ -3036,7 +3487,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/waitForTemperature", - "enum": ["heaterShaker/waitForTemperature"], + "enum": [ + "heaterShaker/waitForTemperature" + ], "type": "string" }, "params": { @@ -3056,7 +3509,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__heater_shaker__set_target_temperature__SetTargetTemperatureParams": { "title": "SetTargetTemperatureParams", @@ -3074,7 +3529,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "opentrons__protocol_engine__commands__heater_shaker__set_target_temperature__SetTargetTemperatureCreate": { "title": "SetTargetTemperatureCreate", @@ -3084,7 +3542,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/setTargetTemperature", - "enum": ["heaterShaker/setTargetTemperature"], + "enum": [ + "heaterShaker/setTargetTemperature" + ], "type": "string" }, "params": { @@ -3104,7 +3564,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateHeaterParams": { "title": "DeactivateHeaterParams", @@ -3117,7 +3579,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateHeaterCreate": { "title": "DeactivateHeaterCreate", @@ -3127,7 +3591,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/deactivateHeater", - "enum": ["heaterShaker/deactivateHeater"], + "enum": [ + "heaterShaker/deactivateHeater" + ], "type": "string" }, "params": { @@ -3147,7 +3613,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetAndWaitForShakeSpeedParams": { "title": "SetAndWaitForShakeSpeedParams", @@ -3165,7 +3633,10 @@ "type": "number" } }, - "required": ["moduleId", "rpm"] + "required": [ + "moduleId", + "rpm" + ] }, "SetAndWaitForShakeSpeedCreate": { "title": "SetAndWaitForShakeSpeedCreate", @@ -3175,7 +3646,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/setAndWaitForShakeSpeed", - "enum": ["heaterShaker/setAndWaitForShakeSpeed"], + "enum": [ + "heaterShaker/setAndWaitForShakeSpeed" + ], "type": "string" }, "params": { @@ -3195,7 +3668,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateShakerParams": { "title": "DeactivateShakerParams", @@ -3208,7 +3683,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateShakerCreate": { "title": "DeactivateShakerCreate", @@ -3218,7 +3695,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/deactivateShaker", - "enum": ["heaterShaker/deactivateShaker"], + "enum": [ + "heaterShaker/deactivateShaker" + ], "type": "string" }, "params": { @@ -3238,7 +3717,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "OpenLabwareLatchParams": { "title": "OpenLabwareLatchParams", @@ -3251,7 +3732,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "OpenLabwareLatchCreate": { "title": "OpenLabwareLatchCreate", @@ -3261,7 +3744,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/openLabwareLatch", - "enum": ["heaterShaker/openLabwareLatch"], + "enum": [ + "heaterShaker/openLabwareLatch" + ], "type": "string" }, "params": { @@ -3281,7 +3766,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CloseLabwareLatchParams": { "title": "CloseLabwareLatchParams", @@ -3294,7 +3781,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "CloseLabwareLatchCreate": { "title": "CloseLabwareLatchCreate", @@ -3304,7 +3793,9 @@ "commandType": { "title": "Commandtype", "default": "heaterShaker/closeLabwareLatch", - "enum": ["heaterShaker/closeLabwareLatch"], + "enum": [ + "heaterShaker/closeLabwareLatch" + ], "type": "string" }, "params": { @@ -3324,7 +3815,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DisengageParams": { "title": "DisengageParams", @@ -3337,7 +3830,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DisengageCreate": { "title": "DisengageCreate", @@ -3347,7 +3842,9 @@ "commandType": { "title": "Commandtype", "default": "magneticModule/disengage", - "enum": ["magneticModule/disengage"], + "enum": [ + "magneticModule/disengage" + ], "type": "string" }, "params": { @@ -3367,7 +3864,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "EngageParams": { "title": "EngageParams", @@ -3385,7 +3884,10 @@ "type": "number" } }, - "required": ["moduleId", "height"] + "required": [ + "moduleId", + "height" + ] }, "EngageCreate": { "title": "EngageCreate", @@ -3395,7 +3897,9 @@ "commandType": { "title": "Commandtype", "default": "magneticModule/engage", - "enum": ["magneticModule/engage"], + "enum": [ + "magneticModule/engage" + ], "type": "string" }, "params": { @@ -3415,7 +3919,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__temperature_module__set_target_temperature__SetTargetTemperatureParams": { "title": "SetTargetTemperatureParams", @@ -3433,7 +3939,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "opentrons__protocol_engine__commands__temperature_module__set_target_temperature__SetTargetTemperatureCreate": { "title": "SetTargetTemperatureCreate", @@ -3443,7 +3952,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/setTargetTemperature", - "enum": ["temperatureModule/setTargetTemperature"], + "enum": [ + "temperatureModule/setTargetTemperature" + ], "type": "string" }, "params": { @@ -3463,7 +3974,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__temperature_module__wait_for_temperature__WaitForTemperatureParams": { "title": "WaitForTemperatureParams", @@ -3481,7 +3994,9 @@ "type": "number" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__temperature_module__wait_for_temperature__WaitForTemperatureCreate": { "title": "WaitForTemperatureCreate", @@ -3491,7 +4006,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/waitForTemperature", - "enum": ["temperatureModule/waitForTemperature"], + "enum": [ + "temperatureModule/waitForTemperature" + ], "type": "string" }, "params": { @@ -3511,7 +4028,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateTemperatureParams": { "title": "DeactivateTemperatureParams", @@ -3524,7 +4043,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateTemperatureCreate": { "title": "DeactivateTemperatureCreate", @@ -3534,7 +4055,9 @@ "commandType": { "title": "Commandtype", "default": "temperatureModule/deactivate", - "enum": ["temperatureModule/deactivate"], + "enum": [ + "temperatureModule/deactivate" + ], "type": "string" }, "params": { @@ -3554,7 +4077,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetTargetBlockTemperatureParams": { "title": "SetTargetBlockTemperatureParams", @@ -3582,7 +4107,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "SetTargetBlockTemperatureCreate": { "title": "SetTargetBlockTemperatureCreate", @@ -3592,7 +4120,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/setTargetBlockTemperature", - "enum": ["thermocycler/setTargetBlockTemperature"], + "enum": [ + "thermocycler/setTargetBlockTemperature" + ], "type": "string" }, "params": { @@ -3612,7 +4142,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForBlockTemperatureParams": { "title": "WaitForBlockTemperatureParams", @@ -3625,7 +4157,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "WaitForBlockTemperatureCreate": { "title": "WaitForBlockTemperatureCreate", @@ -3635,7 +4169,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/waitForBlockTemperature", - "enum": ["thermocycler/waitForBlockTemperature"], + "enum": [ + "thermocycler/waitForBlockTemperature" + ], "type": "string" }, "params": { @@ -3655,7 +4191,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "SetTargetLidTemperatureParams": { "title": "SetTargetLidTemperatureParams", @@ -3673,7 +4211,10 @@ "type": "number" } }, - "required": ["moduleId", "celsius"] + "required": [ + "moduleId", + "celsius" + ] }, "SetTargetLidTemperatureCreate": { "title": "SetTargetLidTemperatureCreate", @@ -3683,7 +4224,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/setTargetLidTemperature", - "enum": ["thermocycler/setTargetLidTemperature"], + "enum": [ + "thermocycler/setTargetLidTemperature" + ], "type": "string" }, "params": { @@ -3703,7 +4246,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "WaitForLidTemperatureParams": { "title": "WaitForLidTemperatureParams", @@ -3716,7 +4261,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "WaitForLidTemperatureCreate": { "title": "WaitForLidTemperatureCreate", @@ -3726,7 +4273,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/waitForLidTemperature", - "enum": ["thermocycler/waitForLidTemperature"], + "enum": [ + "thermocycler/waitForLidTemperature" + ], "type": "string" }, "params": { @@ -3746,7 +4295,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateBlockParams": { "title": "DeactivateBlockParams", @@ -3759,7 +4310,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateBlockCreate": { "title": "DeactivateBlockCreate", @@ -3769,7 +4322,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/deactivateBlock", - "enum": ["thermocycler/deactivateBlock"], + "enum": [ + "thermocycler/deactivateBlock" + ], "type": "string" }, "params": { @@ -3789,7 +4344,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "DeactivateLidParams": { "title": "DeactivateLidParams", @@ -3802,7 +4359,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "DeactivateLidCreate": { "title": "DeactivateLidCreate", @@ -3812,7 +4371,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/deactivateLid", - "enum": ["thermocycler/deactivateLid"], + "enum": [ + "thermocycler/deactivateLid" + ], "type": "string" }, "params": { @@ -3832,7 +4393,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__thermocycler__open_lid__OpenLidParams": { "title": "OpenLidParams", @@ -3845,7 +4408,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__thermocycler__open_lid__OpenLidCreate": { "title": "OpenLidCreate", @@ -3855,7 +4420,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/openLid", - "enum": ["thermocycler/openLid"], + "enum": [ + "thermocycler/openLid" + ], "type": "string" }, "params": { @@ -3875,7 +4442,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__thermocycler__close_lid__CloseLidParams": { "title": "CloseLidParams", @@ -3888,7 +4457,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__thermocycler__close_lid__CloseLidCreate": { "title": "CloseLidCreate", @@ -3898,7 +4469,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/closeLid", - "enum": ["thermocycler/closeLid"], + "enum": [ + "thermocycler/closeLid" + ], "type": "string" }, "params": { @@ -3918,7 +4491,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "RunProfileStepParams": { "title": "RunProfileStepParams", @@ -3936,7 +4511,10 @@ "type": "number" } }, - "required": ["celsius", "holdSeconds"] + "required": [ + "celsius", + "holdSeconds" + ] }, "RunProfileParams": { "title": "RunProfileParams", @@ -3962,7 +4540,10 @@ "type": "number" } }, - "required": ["moduleId", "profile"] + "required": [ + "moduleId", + "profile" + ] }, "RunProfileCreate": { "title": "RunProfileCreate", @@ -3972,7 +4553,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/runProfile", - "enum": ["thermocycler/runProfile"], + "enum": [ + "thermocycler/runProfile" + ], "type": "string" }, "params": { @@ -3992,7 +4575,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ProfileStep": { "title": "ProfileStep", @@ -4010,7 +4595,10 @@ "type": "number" } }, - "required": ["celsius", "holdSeconds"] + "required": [ + "celsius", + "holdSeconds" + ] }, "ProfileCycle": { "title": "ProfileCycle", @@ -4031,7 +4619,10 @@ "type": "integer" } }, - "required": ["steps", "repetitions"] + "required": [ + "steps", + "repetitions" + ] }, "RunExtendedProfileParams": { "title": "RunExtendedProfileParams", @@ -4064,7 +4655,10 @@ "type": "number" } }, - "required": ["moduleId", "profileElements"] + "required": [ + "moduleId", + "profileElements" + ] }, "RunExtendedProfileCreate": { "title": "RunExtendedProfileCreate", @@ -4074,7 +4668,9 @@ "commandType": { "title": "Commandtype", "default": "thermocycler/runExtendedProfile", - "enum": ["thermocycler/runExtendedProfile"], + "enum": [ + "thermocycler/runExtendedProfile" + ], "type": "string" }, "params": { @@ -4094,7 +4690,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__close_lid__CloseLidParams": { "title": "CloseLidParams", @@ -4107,7 +4705,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__close_lid__CloseLidCreate": { "title": "CloseLidCreate", @@ -4117,7 +4717,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/closeLid", - "enum": ["absorbanceReader/closeLid"], + "enum": [ + "absorbanceReader/closeLid" + ], "type": "string" }, "params": { @@ -4137,7 +4739,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__open_lid__OpenLidParams": { "title": "OpenLidParams", @@ -4150,7 +4754,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "opentrons__protocol_engine__commands__absorbance_reader__open_lid__OpenLidCreate": { "title": "OpenLidCreate", @@ -4160,7 +4766,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/openLid", - "enum": ["absorbanceReader/openLid"], + "enum": [ + "absorbanceReader/openLid" + ], "type": "string" }, "params": { @@ -4180,7 +4788,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "InitializeParams": { "title": "InitializeParams", @@ -4195,7 +4805,10 @@ "measureMode": { "title": "Measuremode", "description": "Initialize single or multi measurement mode.", - "enum": ["single", "multi"], + "enum": [ + "single", + "multi" + ], "type": "string" }, "sampleWavelengths": { @@ -4212,7 +4825,11 @@ "type": "integer" } }, - "required": ["moduleId", "measureMode", "sampleWavelengths"] + "required": [ + "moduleId", + "measureMode", + "sampleWavelengths" + ] }, "InitializeCreate": { "title": "InitializeCreate", @@ -4222,7 +4839,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/initialize", - "enum": ["absorbanceReader/initialize"], + "enum": [ + "absorbanceReader/initialize" + ], "type": "string" }, "params": { @@ -4242,7 +4861,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "ReadAbsorbanceParams": { "title": "ReadAbsorbanceParams", @@ -4260,7 +4881,9 @@ "type": "string" } }, - "required": ["moduleId"] + "required": [ + "moduleId" + ] }, "ReadAbsorbanceCreate": { "title": "ReadAbsorbanceCreate", @@ -4270,7 +4893,9 @@ "commandType": { "title": "Commandtype", "default": "absorbanceReader/read", - "enum": ["absorbanceReader/read"], + "enum": [ + "absorbanceReader/read" + ], "type": "string" }, "params": { @@ -4290,12 +4915,17 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibrateGripperParamsJaw": { "title": "CalibrateGripperParamsJaw", "description": "An enumeration.", - "enum": ["front", "rear"] + "enum": [ + "front", + "rear" + ] }, "Vec3f": { "title": "Vec3f", @@ -4315,7 +4945,11 @@ "type": "number" } }, - "required": ["x", "y", "z"] + "required": [ + "x", + "y", + "z" + ] }, "CalibrateGripperParams": { "title": "CalibrateGripperParams", @@ -4340,7 +4974,9 @@ ] } }, - "required": ["jaw"] + "required": [ + "jaw" + ] }, "CalibrateGripperCreate": { "title": "CalibrateGripperCreate", @@ -4350,7 +4986,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibrateGripper", - "enum": ["calibration/calibrateGripper"], + "enum": [ + "calibration/calibrateGripper" + ], "type": "string" }, "params": { @@ -4370,7 +5008,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibratePipetteParams": { "title": "CalibratePipetteParams", @@ -4386,7 +5026,9 @@ ] } }, - "required": ["mount"] + "required": [ + "mount" + ] }, "CalibratePipetteCreate": { "title": "CalibratePipetteCreate", @@ -4396,7 +5038,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibratePipette", - "enum": ["calibration/calibratePipette"], + "enum": [ + "calibration/calibratePipette" + ], "type": "string" }, "params": { @@ -4416,7 +5060,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "CalibrateModuleParams": { "title": "CalibrateModuleParams", @@ -4442,7 +5088,11 @@ ] } }, - "required": ["moduleId", "labwareId", "mount"] + "required": [ + "moduleId", + "labwareId", + "mount" + ] }, "CalibrateModuleCreate": { "title": "CalibrateModuleCreate", @@ -4452,7 +5102,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/calibrateModule", - "enum": ["calibration/calibrateModule"], + "enum": [ + "calibration/calibrateModule" + ], "type": "string" }, "params": { @@ -4472,12 +5124,17 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MaintenancePosition": { "title": "MaintenancePosition", "description": "Maintenance position options.", - "enum": ["attachPlate", "attachInstrument"] + "enum": [ + "attachPlate", + "attachInstrument" + ] }, "MoveToMaintenancePositionParams": { "title": "MoveToMaintenancePositionParams", @@ -4502,7 +5159,9 @@ ] } }, - "required": ["mount"] + "required": [ + "mount" + ] }, "MoveToMaintenancePositionCreate": { "title": "MoveToMaintenancePositionCreate", @@ -4512,7 +5171,9 @@ "commandType": { "title": "Commandtype", "default": "calibration/moveToMaintenancePosition", - "enum": ["calibration/moveToMaintenancePosition"], + "enum": [ + "calibration/moveToMaintenancePosition" + ], "type": "string" }, "params": { @@ -4532,7 +5193,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeBlowOutInPlaceParams": { "title": "UnsafeBlowOutInPlaceParams", @@ -4551,7 +5214,10 @@ "type": "string" } }, - "required": ["flowRate", "pipetteId"] + "required": [ + "flowRate", + "pipetteId" + ] }, "UnsafeBlowOutInPlaceCreate": { "title": "UnsafeBlowOutInPlaceCreate", @@ -4561,7 +5227,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/blowOutInPlace", - "enum": ["unsafe/blowOutInPlace"], + "enum": [ + "unsafe/blowOutInPlace" + ], "type": "string" }, "params": { @@ -4581,7 +5249,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeDropTipInPlaceParams": { "title": "UnsafeDropTipInPlaceParams", @@ -4599,7 +5269,9 @@ "type": "boolean" } }, - "required": ["pipetteId"] + "required": [ + "pipetteId" + ] }, "UnsafeDropTipInPlaceCreate": { "title": "UnsafeDropTipInPlaceCreate", @@ -4609,7 +5281,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/dropTipInPlace", - "enum": ["unsafe/dropTipInPlace"], + "enum": [ + "unsafe/dropTipInPlace" + ], "type": "string" }, "params": { @@ -4629,7 +5303,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UpdatePositionEstimatorsParams": { "title": "UpdatePositionEstimatorsParams", @@ -4644,7 +5320,9 @@ } } }, - "required": ["axes"] + "required": [ + "axes" + ] }, "UpdatePositionEstimatorsCreate": { "title": "UpdatePositionEstimatorsCreate", @@ -4654,7 +5332,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/updatePositionEstimators", - "enum": ["unsafe/updatePositionEstimators"], + "enum": [ + "unsafe/updatePositionEstimators" + ], "type": "string" }, "params": { @@ -4674,7 +5354,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeEngageAxesParams": { "title": "UnsafeEngageAxesParams", @@ -4689,7 +5371,9 @@ } } }, - "required": ["axes"] + "required": [ + "axes" + ] }, "UnsafeEngageAxesCreate": { "title": "UnsafeEngageAxesCreate", @@ -4699,7 +5383,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/engageAxes", - "enum": ["unsafe/engageAxes"], + "enum": [ + "unsafe/engageAxes" + ], "type": "string" }, "params": { @@ -4719,7 +5405,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafeUngripLabwareParams": { "title": "UnsafeUngripLabwareParams", @@ -4735,7 +5423,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/ungripLabware", - "enum": ["unsafe/ungripLabware"], + "enum": [ + "unsafe/ungripLabware" + ], "type": "string" }, "params": { @@ -4755,7 +5445,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "UnsafePlaceLabwareParams": { "title": "UnsafePlaceLabwareParams", @@ -4786,7 +5478,10 @@ ] } }, - "required": ["labwareId", "location"] + "required": [ + "labwareId", + "location" + ] }, "UnsafePlaceLabwareCreate": { "title": "UnsafePlaceLabwareCreate", @@ -4796,7 +5491,9 @@ "commandType": { "title": "Commandtype", "default": "unsafe/placeLabware", - "enum": ["unsafe/placeLabware"], + "enum": [ + "unsafe/placeLabware" + ], "type": "string" }, "params": { @@ -4816,7 +5513,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveAxesRelativeParams": { "title": "MoveAxesRelativeParams", @@ -4837,7 +5536,9 @@ "type": "number" } }, - "required": ["axis_map"] + "required": [ + "axis_map" + ] }, "MoveAxesRelativeCreate": { "title": "MoveAxesRelativeCreate", @@ -4847,7 +5548,9 @@ "commandType": { "title": "Commandtype", "default": "robot/moveAxesRelative", - "enum": ["robot/moveAxesRelative"], + "enum": [ + "robot/moveAxesRelative" + ], "type": "string" }, "params": { @@ -4867,7 +5570,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveAxesToParams": { "title": "MoveAxesToParams", @@ -4896,7 +5601,9 @@ "type": "number" } }, - "required": ["axis_map"] + "required": [ + "axis_map" + ] }, "MoveAxesToCreate": { "title": "MoveAxesToCreate", @@ -4906,7 +5613,9 @@ "commandType": { "title": "Commandtype", "default": "robot/moveAxesTo", - "enum": ["robot/moveAxesTo"], + "enum": [ + "robot/moveAxesTo" + ], "type": "string" }, "params": { @@ -4926,7 +5635,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] }, "MoveToParams": { "title": "MoveToParams", @@ -4956,7 +5667,10 @@ "type": "number" } }, - "required": ["mount", "destination"] + "required": [ + "mount", + "destination" + ] }, "MoveToCreate": { "title": "MoveToCreate", @@ -4966,7 +5680,9 @@ "commandType": { "title": "Commandtype", "default": "robot/moveTo", - "enum": ["robot/moveTo"], + "enum": [ + "robot/moveTo" + ], "type": "string" }, "params": { @@ -4986,7 +5702,9 @@ "type": "string" } }, - "required": ["params"] + "required": [ + "params" + ] } }, "$id": "opentronsCommandSchemaV11",