Odometer

[jbalat]

It would be nice to keep track of how many KM you have done on the bike for maintenance purposes

[casainho]

Hmmm, why did you close? A mistake?

I also think this should be implemented, in LCD3 and I think is no problem to be here the issues for LCD3.

[jbalat]

I dont know if it is already there ? On the bottom right of the display there is a number. Is it an odometer field or is it the percentage of watt hours used over the max watt hours. it seems to reset randomly back to zero, but I flash a lot and I can't tell what it is ?

[casainho]

battery state of charge in percentage: this value can be shown as an option on the temperature field. The percentage is based on the accumulated battery power draw from your battery pack and user can define on LCD configurations menu, the battery pack total watts/hour.

[ncvanleeuwen]

Nice feature! My two cents:

• We should be able to reset the value?
• Nice to configure an initial value in case it was incorrectly reset or lost during an update
• Maintenance warnings? User can configure and reset maintenance intervals?

[troebi2]

I just write an issue in the KT3 area:

It may be very helpful, when the KT3 display may show the main functions of a trip computer.

ODO (settable in the config menu when changing the bike/motor/firmware)
DST (resettable with long press "down button)
MAX maximum speed (resettable with long press "down button)
AVG average speed (resettable with long press "down button)

The KT3 display has the icons. If the walk assist mode is not needed, the long press "down" button may provide the reset.

[ncvanleeuwen]

@casainho is the information about the ODO/DST feature missing in the wiki? https://github.com/OpenSource-EBike-firmware/TSDZ2_wiki/wiki/Usage-and-configuration-of-firmware-version-0.13

[casainho]

@endlesscadence , there is only the option to reset and it is on 8: Various -> 3.