Get up and running quickly with Open edX services.
This project replaces the older Vagrant-based devstack with a multi-container approach driven by Docker Compose.
A Devstack installation includes the following Open edX components by default:
- The Learning Management System (LMS)
- Open Response Assessments (ORA2), among other LMS plug-ins.
- Open edX Studio
- Discussion Forums
- E-Commerce
- Credentials
- Notes
- Course Discovery
- Open edX Search
- A demonstration Open edX course
- The Publisher and Gradebook micro-frontends
It also includes the following extra components:
- XQueue
- The Learning micro-frontend (A.K.A the new Courseware experience)
- The Program Console micro-frontend
- The Library Authoring micro-frontend
- edX Registrar service.
- The course-authoring micro-frontend
- Where to Find Help
- Prerequisites
- Using the Latest Images
- Roadmap
- Getting Started
- Usernames and Passwords
- Enable ADG theme
- Service List
- Useful Commands
- Frequently Asked Questions
- Testing and Debugging
- Troubleshooting: General Tips
- Troubleshooting: Common Issues
- Troubleshooting: Performance
- Known Issues
- Advanced Configuration Options
There are a number of places to get help, including mailing lists and real-time chat. Please choose an appropriate venue for your question. This helps ensure that you get good prompt advice, and keeps discussion focused. For details of your options, see the Community pages.
You will need to have the following installed:
- make
- Python 3
- Docker
This project requires Docker 17.06+ CE. We recommend Docker Stable, but Docker Edge should work as well.
NOTE: Switching between Docker Stable and Docker Edge will remove all images and settings. Don't forget to restore your memory setting and be prepared to provision.
For macOS users, please use Docker for Mac. Previous Mac-based tools (e.g. boot2docker) are not supported.
Since a Docker-based devstack runs many containers, you should configure Docker with a sufficient amount of resources. We find that configuring Docker for Mac with a minimum of 2 CPUs, 8GB of memory, and a disk image size of 96GB does work.
Docker for Windows may work but has not been tested and is not supported.
If you are using Linux, use the overlay2 storage driver, kernel version
4.0+ and not overlay. To check which storage driver your
docker-daemon uses, run the following command.
docker info | grep -i 'storage driver'You should run all make commands described below on your local machinge, not
from within a Virtual Machine, as these commands are meant to stand up a VM-like environment using
Docker containers.
However, you may want to run the make commands from within a Python 3 virtual
environment, as described in Getting Started. This will keep the Python packages required for Devstack separate from
the ones installed globally on your system.
NOTE: LMS is now using MySql 5.7 by default, you have to run make dev.pull.lms and make dev.provision.lms (more details in Getting Started)
to fetch latest images and re provision local copies of databases in order for an existing devstack setup to keep working.
By default, these instructions will install the master branch. If you want to install a named release instead (e.g. juniper.master), follow the steps in How do I run the images for a named Open edX release? before pulling the docker images. You can learn more about named releases in the official documentation.
New images for our services are published frequently. Assuming that you've followed the steps in Getting Started below, run the following sequence of commands if you want to use the most up-to-date versions of all default devstack images.
make down
make dev.pull
make dev.upThis will stop and remove any running devstack containers, pull the latest images, and then start all of the devstack containers.
If you wish to pull only images relevant to certain services, you can run make dev.pull.<services>.
For example, the following only only pulls images of E-Commerce and Credentials, as well as their dependencies (like LMS).
make dev.pull.ecommerce+credentialsTo further save time, make dev.pull.without-deps.<services> pulls the images for the specified service and nothing else.
make dev.pull.without-deps.ecommerce+credentialsThis repository is in sustained status. The goal is to deprecate this codebase and move the development environment setup into the repos with the application code.
Documentation for future of devstack can be found at: decentralized devstack
Documentation for first prototype of decentralized devstack can be found at: decentralized devstack workflows
The default devstack services can be run by following the steps below.
Install the requirements inside of a Python virtualenv.
make requirements
This will install docker-compose and other utilities into your virtualenv.
The Docker Compose file mounts a host volume for each service's executing code. The host directory defaults to be a sibling of this directory. For example, if this repo is cloned to
~/workspace/devstack, host volumes will be expected in~/workspace/course-discovery,~/workspace/ecommerce, etc. These repos can be cloned with the command below.make dev.clone # or, `make dev.clone.https` if you don't have SSH keys set up.You may customize where the local repositories are found by setting the
DEVSTACK_WORKSPACEenvironment variable.(macOS only) Share the cloned service directories in Docker, using Docker -> Preferences -> File Sharing in the Docker menu.
Pull any changes made to the various images on which the devstack depends.
make dev.pull
- Optional: You have an option to use NFS on MacOS which may improve the performance significantly. To set it up ONLY ON MAC, do
make dev.nfs.setup
Run the provision command, if you haven't already, to configure the various services with superusers (for development without the auth service) and tenants (for multi-tenancy).
NOTE: When running the provision command, databases for ecommerce and edxapp will be dropped and recreated.
The username and password for the superusers are both
edx. You can access the services directly via Django admin at the/admin/path, or login via single sign-on at/login/.Default:
make dev.provision
Provision using docker-sync:
make dev.sync.provision
Provision using NFS:
make dev.nfs.provision
This is expected to take a while, produce a lot of output from a bunch of steps, and finally end with
Provisioning complete!NOTE: This command will bring up both MySQL 5.6 and 5.7 databases until all services are upgraded to 5.7.
Start the services. This command will mount the repositories under the
DEVSTACK_WORKSPACEdirectory.NOTE: it may take up to 60 seconds for the LMS to start, even after the
make dev.upcommand outputsdone.Default:
make dev.up
Start using docker-sync:
make dev.sync.up
Start using NFS:
make dev.nfs.up
To stop a service, use make dev.stop.<service>, and to both stop it
and remove the container (along with any changes you have made
to the filesystem in the container) use make dev.down.<service>.
After the services have started, if you need shell access to one of the
services, run make dev.shell.<service>. For example to access the
Catalog/Course Discovery Service, you can run:
make dev.shell.discoveryTo see logs from containers running in detached mode, you can either use "Kitematic" (available from the "Docker for Mac" menu), or by running the following:
make dev.logsTo view the logs of a specific service container run make dev.logs.<service>.
For example, to access the logs for Ecommerce, you can run:
make dev.logs.ecommerceFor information on the supported make commands, you can run:
make helpThe provisioning script creates a Django superuser for every service.
Email: [email protected] Username: edx Password: edx
The LMS also includes demo accounts. The passwords for each of these accounts
is edx.
Account Description [email protected]An LMS and Studio user with course creation and editing permissions. This user is a course team member with the Admin role, which gives rights to work with the demonstration course in Studio, the LMS, and Insights. [email protected]A student account that you can use to access the LMS for testing verified certificates. [email protected]A student account that you can use to access the LMS for testing course auditing. [email protected]A student account that you can use to access the LMS for testing honor code certificates.
First of all, clone adg theme to edx-platform/themes folder.
Open django admin, go to site-theme and add the following credentials and save it.
site: localhost:18000
Theme dir name: adgNow goto Site_Configuration and add a new site.
Choose localhost:18000 from site dropdown, check Enabled checkbox and save it.
Then run the command make dev.restart-devserver.lms.
These are the edX services that Devstack can provision, pull, run, attach to, etc.
Each service is accessible at localhost on a specific port.
The table below provides links to the homepage, API root, or API docs of each service,
as well as links to the repository where each service's code lives.
The services marked as Default are provisioned/pulled/run whenever you run
make dev.provision / make dev.pull / make dev.up, respectively.
The extra services are provisioned/pulled/run when specifically requested (e.g.,
make dev.provision.xqueue / make dev.pull.xqueue / make dev.up.xqueue).
Alternatively, you can run these by modifying the DEFAULT_SERVICES option as described in the Advanced Configuration Options section.
You may notice that many Devstack commands come in the form dev.ACTION.SERVICE.
As examples:
make dev.up.registrar
make dev.shell.lms
make dev.attach.studio
make dev.down.credentials
make dev.migrate.edx_notes_api
make dev.static.ecommerce
make dev.restart-devserver.forum
make dev.logs.gradebookIn general, these commands can also be given in the form SERVICE-ACTION,
which saves some keystrokes and is often more friendly for automatic command-completion
by hitting TAB. As examples:
make registrar-up
make lms-shell
make studio-attach
make credentials-down
make edx_notes_api-migrate
make ecommerce-static
make forum-restart-devserver
make gradebook-logsmake dev.up can take a long time, as it starts all services, whether or not
you need them. To instead only start a single service and its dependencies, run
make dev.up.<services>. For example:
make dev.up.lmsThat above command will bring up LMS (along with Memcached, MySQL, DevPI, et al), but it will not bring up Credentials, Studio, or E-Commerce or any of the other default services.
You can also specify multiple services:
make dev.up.ecommerce+studioSimilarly, make dev.pull can take a long time, as it pulls all services' images,
whether or not you need them.
To instead only pull images required by your service and its dependencies,
run make dev.pull.<services>. For example:
make dev.pull.discoverySometimes you may need to manually restart a particular application server To do so,
the quickest command to run is make dev.restart-devserver.<service>, which restarts the Django/Sinatra server inside the container without restarting the container itself. For example:
make dev.restart-devserver.credentialsThis can be helpful, for example, if automatic code reloading isn't working for some reason.
If you wish to restart the container itself, which takes a bit longer but may resolve a larger class of issues, use make dev.restart-container.<services>. For example:
make dev.restart-container.credentialsBy default, the steps above will install the devstack using the master branch of all repos. If you want to install a named release instead, follow these steps before pulling the docker images in step 3 of the Getting Started guide:
- Set the
OPENEDX_RELEASEenvironment variable to the appropriate image tag; "hawthorn.master", "zebrawood.rc1", etc. Note that unlike a server install,OPENEDX_RELEASEshould not have the "open-release/" prefix. - Check out the appropriate branch in devstack, e.g.
git checkout open-release/ironwood.master - Use
make dev.checkoutto check out the correct branch in the local checkout of each service repository - Continue with step 3 in the Getting Started guide to pull the correct docker images.
All make target and docker-compose calls should now use the correct
images until you change or unset OPENEDX_RELEASE again. To work on the
master branches and latest images, unset OPENEDX_RELEASE or set it to
an empty string.
You can have multiple isolated Devstacks provisioned on a single computer now. Follow these directions after installing at least two devstacks to switch between them.
- If you haven't done so, follow the steps in the Getting Started section, to install the master devstack or any other named release. We recommend that you have at least one devstack on the master branch.
- Change directory to your devstack and activate the virtual env.
- Stop any running containers by issuing a
make dev.stop. - Follow the steps in Getting Started section again, setting the additional OPENEDX_RELEASE you want to install in step 2
The implication of this is that you can switch between isolated Devstack databases by changing the value of the OPENEDX_RELEASE environment variable.
- Stop the containers by issuing a
make dev.stopfor the running release. - Edit the project name in
options.local.mkor set theOPENEDX_RELEASEenvironment variable and let theCOMPOSE_PROJECT_NAMEbe assigned automatically. - Check out the appropriate branch in devstack, e.g.
git checkout open-release/ironwood.master - Use
make dev.checkoutto check out the correct branch in the local copy of each service repository - Bring up the containers with
make dev.up,make dev.nfs.upormake dev.sync.up.
NOTE: Additional instructions on switching releases using direnv can be found in How do I switch releases using 'direnv'? section.
Examples of Docker Service Names After Setting the COMPOSE_PROJECT_NAME variable. Notice that the devstack-juniper.master name represents the COMPOSE_PROJECT_NAME.
- edx.devstack-juniper.master.lms
- edx.devstack-juniper.master.mysql
Each instance has an isolated set of databases. This could, for example, be used to quickly switch between versions of Open edX without hitting as many issues with migrations, data integrity, etc.
Unfortunately, this does not currently support running Devstacks simultaneously, because we hard-code host port numbers all over the place, and two running containers cannot share the same host port.
See if the troubleshooting of this readme can help resolve your broken devstack first, then try posting on the Open edX forums to see if you have the same issue as any others. If you think you have found a bug, file a CR ticket.
Make sure you bring down your devstack before changing the value of COMPOSE_PROJECT_NAME. If you forgot to, change the COMPOSE_PROJECT_NAME back to its original value, run make dev.stop, and then try again.
With the default value of COMPOSE_PROJECT_NAME = devstack, they should still work. If you choose a different COMPOSE_PROJECT_NAME, your extensions will likely break, because the names of containers change along with the project name.
Follow directions in Switch between your Devstack releases by doing the following: then make the following adjustments.
Make sure that you have setup each Open edX release in separate directories using How do I enable environment variables for current directory using 'direnv'? instructions. Open the next release project in a separate code editor, then activate the direnv environment variables and virtual environment for the next release by using a terminal shell to traverse to the directory with the corresponding release .envrc file. You may need to issue a direnv allow command to enable the .envrc file.
# You should see something like the following after successfully enabling 'direnv' for the Juniper release. direnv: loading ~/open-edx/devstack.juniper/.envrc direnv: export +DEVSTACK_WORKSPACE +OPENEDX_RELEASE +VIRTUAL_ENV ~PATH (venv)username@computer-name devstack.juniper %
NOTE: Setting of the OPENEDX_RELEASE should have been handled within the .envrc file for named releases only and should not be defined for the master release.
We recommend separating the named releases into different directories, for clarity purposes. You can use direnv to define different environment variables per directory:
.. code::
# Example showing directory structure for separate Open edX releases.
/Users/<username>/open-edx – root directory for platform development
|_ ./devstack.master – directory containing all repository information related to the main development release.
|_ ./devstack.juniper – directory containing all repository information related to the Juniper release.
Install direnv using instructions on https://direnv.net/. Below you will find additional setup at the time of this writing so refer to latest of direnv site for additional configuration needed.
Setup the following configuration to hook direnv for local directory environment overrides. There are two examples for BASH or ZSH (Mac OS X) shells.
## ~/.bashrc for BASH shell ## Hook in `direnv` for local directory environment overrides. ## https://direnv.net/docs/hook.html eval "$(direnv hook bash)" # https://github.com/direnv/direnv/wiki/Python#bash show_virtual_env() { if [[ -n "$VIRTUAL_ENV" && -n "$DIRENV_DIR" ]]; then echo "($(basename $VIRTUAL_ENV))" fi } export -f show_virtual_env PS1='$(show_virtual_env)'$PS1 # --------------------------------------------------- ## ~/.zshrc for ZSH shell for Mac OS X. ## Hook in `direnv` for local directory environment setup. ## https://direnv.net/docs/hook.html eval "$(direnv hook zsh)" # https://github.com/direnv/direnv/wiki/Python#zsh setopt PROMPT_SUBST show_virtual_env() { if [[ -n "$VIRTUAL_ENV" && -n "$DIRENV_DIR" ]]; then echo "($(basename $VIRTUAL_ENV))" fi } PS1='$(show_virtual_env)'$PS1
Setup layout_python-venv function to be used in local project directory .envrc file.
## ~/.config/direnv/direnvrc # https://github.com/direnv/direnv/wiki/Python#venv-stdlib-module realpath() { [[ $1 = /* ]] && echo "$1" || echo "$PWD/${1#./}" } layout_python-venv() { local python=${1:-python3} [[ $# -gt 0 ]] && shift unset PYTHONHOME if [[ -n $VIRTUAL_ENV ]]; then VIRTUAL_ENV=$(realpath "${VIRTUAL_ENV}") else local python_version python_version=$("$python" -c "import platform; print(platform.python_version())") if [[ -z $python_version ]]; then log_error "Could not detect Python version" return 1 fi VIRTUAL_ENV=$PWD/.direnv/python-venv-$python_version fi export VIRTUAL_ENV if [[ ! -d $VIRTUAL_ENV ]]; then log_status "no venv found; creating $VIRTUAL_ENV" "$python" -m venv "$VIRTUAL_ENV" fi PATH="${VIRTUAL_ENV}/bin:${PATH}" export PATH }
Example .envrc file used in project directory. Need to make sure that each release root has this unique file.
# Open edX named release project directory root. ## <project-path>/devstack.juniper/.envrc # https://discuss.openedx.org/t/docker-devstack-multiple-releases-one-machine/1902/10 # This is handled when OPENEDX_RELEASE is set. Leaving this in for manual override. # export COMPOSE_PROJECT_NAME=devstack-juniper export DEVSTACK_WORKSPACE="$(pwd)" export OPENEDX_RELEASE=juniper.master export VIRTUAL_ENV="$(pwd)/devstack/venv" # https://github.com/direnv/direnv/wiki/Python#virtualenv layout python-venv
If you'd like to add some convenience make targets, you can add them to a local.mk file, ignored by git.
The ecommerce image comes pre-configured for payments via CyberSource and PayPal. Additionally, the provisioning scripts
add the demo course (course-v1:edX+DemoX+Demo_Course) to the ecommerce catalog. You can initiate a checkout by visiting
http://localhost:18130/basket/add/?sku=8CF08E5 or clicking one of the various upgrade links in the LMS. The following
details can be used for checkout. While the name and address fields are required for credit card payments, their values
are not checked in development, so put whatever you want in those fields.
- Card Type: Visa
- Card Number: 4111111111111111
- CVN: 123 (or any three digits)
- Expiry Date: 06/2025 (or any date in the future)
PayPal (same for username and password): [email protected]
If you want to modify an installed package – for instance edx-enterprise or completion – clone the repository in
~/workspace/src/your-package. Next, ssh into the appropriate docker container (make lms-shell),
run pip install -e /edx/src/your-package, and restart the service.
Unlike the node_modules directory, the virtualenv used to run Python
code in a Docker container only exists inside that container. Changes made to
a container's filesystem are not saved when the container exits, so if you
manually install or upgrade Python packages in a container (via
pip install, paver install_python_prereqs, etc.), they will no
longer be present if you restart the container. (Devstack Docker containers
lose changes made to the filesystem when you reboot your computer, run
make down, restart or upgrade Docker itself, etc.) If you want to ensure
that your new or upgraded packages are present in the container every time it
starts, you have a few options:
- Merge your updated requirements files and wait for a new edxops Docker image
for that service to be built and uploaded to Docker Hub. You can
then download and use the updated image (for example, via
make dev.pull.<service>). The discovery and edxapp images are built automatically via a Jenkins job. All other images are currently built as needed by edX employees, but will soon be built automatically on a regular basis. See building images for devstack for more information. - You can update your requirements files as appropriate and then build your
own updated image for the service as described above, tagging it such that
docker-composewill use it instead of the last image you downloaded. (Alternatively, you can temporarily editdocker-compose.ymlto replace theimageentry for that service with the ID of your new image.) You should be sure to modify the variable override for the version of the application code used for building the image. See How do I build images?. for more information. - You can temporarily modify the main service command in
docker-compose.ymlto first install your new package(s) each time the container is started. For example, the part of the studio command which reads...&& while true; do...could be changed to...&& pip install my-new-package && while true; do.... - In order to work on locally pip-installed repos like edx-ora2, first clone
them into
../src(relative to this directory). Then, inside your lms shell, you canpip install -e /edx/src/edx-ora2. If you want to keep this code installed across stop/starts, modifydocker-compose.ymlas mentioned above.
JavaScript packages for Node.js are installed into the node_modules
directory of the local git repository checkout which is synced into the
corresponding Docker container. Hence these can be upgraded via any of the
usual methods for that service (npm install,
paver install_node_prereqs, etc.), and the changes will persist between
container restarts.
Optimized static assets are built for all the Open edX services during
provisioning, but you may want to rebuild them for a particular service
after changing some files without re-provisioning the entire devstack. To
do this, run the make dev.static.<service> target. For example:
make dev.static.credentialsTo rebuild static assets for all service containers:
make dev.staticFollowing directions Changing Themes for an Open edX Site to get started. You can create your theme inside the ${DEVSTACK_WORKSPACE}/edx-themes local directory as this maps to the Docker container /edx/app/edx-themes location.
Make sure that you enable the following code in ./edx-platform/lms/envs/devstack.py as this will make sure that you have the appropriate Mako template overrides applied for your theme. Forgetting to enable this will not allow your theme template files to be overriden by the platform. See discuss 3557 for details concerning issues with not enabling the following code.
########################## THEMING #######################
# If you want to enable theming in devstack, uncomment this section and add any relevant
# theme directories to COMPREHENSIVE_THEME_DIRS
# We have to import the private method here because production.py calls
# derive_settings('lms.envs.production') which runs _make_mako_template_dirs with
# the settings from production, which doesn't include these theming settings. Thus,
# the templating engine is unable to find the themed templates because they don't exist
# in it's path. Re-calling derive_settings doesn't work because the settings was already
# changed from a function to a list, and it can't be derived again.
from .common import _make_mako_template_dirs
ENABLE_COMPREHENSIVE_THEMING = True
COMPREHENSIVE_THEME_DIRS = [
"/edx/app/edxapp/edx-platform/themes/",
"/edx/app/edx-themes"
]
TEMPLATES[1]["DIRS"] = _make_mako_template_dirs
derive_settings(__name__)To connect to the databases from an outside editor (such as MySQLWorkbench),
first uncomment these lines from docker-compose.yml's mysql section:
ports:
- "3506:3306"Then connect using the values below. Note that the username and password will
vary depending on the database. For all of the options, see provision.sql.
- Host:
localhost - Port:
3506 - Username:
edxapp001 - Password:
password
If you have trouble connecting, ensure the port was mapped successfully by
running make dev.ps and looking for a line like this:
edx.devstack.mysql docker-entrypoint.sh mysql ... Up 0.0.0.0:3506→3306/tcp.
The edX.org marketing site built on Drupal is being deprecated, but it can still be run via Devstack. See the Marketing Site instructions for details on getting it up and running. This will not be useful to those outside of edX, Inc, as the marketing site is closed-source and is not built with Open edX usage in mind.
See the instructions for building images for devstack.
See the instructions for updating relational database dumps.
To run Django migrations for a particular service, bring up the service and use
make dev.migrate.<service>. For example:
make dev.up.studio
make dev.migrate.studioTo run migrations for all services at once, run:
make dev.up
make dev.migrateAlternatively, you can discard and rebuild the entire database for all
devstack services by re-running make dev.provision or
make dev.sync.provision as appropriate for your configuration. Note that
if your branch has fallen significantly behind master, it may not include all
of the migrations included in the database dump used by provisioning. In these
cases, it's usually best to first rebase the branch onto master to
get the missing migrations.
To access a MongoDB shell, run the following commands:
make dev.shell.mongo
mongoTo access the MySQL shell for a particular database, run:
make dev.shell.mysql
mysql
use <database>;Equivalently, you can use the command make dev.dbshell.<database> as a shortcut. For example,
this will put you in a MySQL shell using the E-Commerce database:
make dev.dbshell.ecommerceFor LMS, log into the LMS shell and run the
makemigrations command with the devstack_docker settings:
make dev.shell.lms
./manage.py lms makemigrations <appname> --settings=devstack_dockerFor Studio, it is similar:
make dev.shell.studio
./manage.py cms makemigrations <appname> --settings=devstack_dockerFinally, for any other service, run:
make dev.shell.<service>
./manage.py makemigrations <appname>Also, make sure you are aware of the Django Migration Don'ts as the edx-platform is deployed using the red-black method.
You can usually switch branches on a service's repository without adverse effects on a running container for it. The service in each container is using runserver and should automatically reload when any changes are made to the code on disk. However, note the points made above regarding database migrations and package updates.
When switching to a branch which differs greatly from the one you've been
working on (especially if the new branch is more recent), you may wish to
halt and remove the existing containers via make down, pull the latest Docker
images via make dev.pull.<service>, and then re-run make dev.provision or
make dev.sync.provision in order to recreate up-to-date databases,
static assets, etc.
If making a patch to a named release, you should pull and use Docker images which were tagged for that release.
LMS and Studio (a.k.a. CMS) read many configuration settings from the container filesystem in the following locations:
/edx/etc/lms.yml/edx/etc/studio.yml
Changes to these files will not persist over a container restart, as they are part of the layered container filesystem and not a mounted volume. However, you may need to change these settings and then have the LMS or Studio pick up the changes.
After changing settings, you can restart the LMS/Studio process without restarting the container by running the following on your host machine:
make dev.restart-devserver.lms # For LMS
make dev.restart-devserver.studio # For Studio/CMSSee the Pycharm Integration documentation.
See the Transifex translations documentation.
LMS and Studio use a devpi container to cache PyPI dependencies, which speeds up several Devstack operations. See the devpi documentation.
It's possible to debug any of the containers' Python services using PDB. To do so, start up the containers as usual with:
make dev.upThis command starts each relevant container with the equivalent of the '--it' option, allowing a developer to attach to the process once the process is up and running.
To attach to a container and its process, use make dev.attach.<service>. For example:
make dev.attach.lmsSet a PDB breakpoint anywhere in the code using one of the following:
breakpoint() # Works in Python >= 3.7
import pdb;pdb.set_trace() # Workg in any version of Pythonand your attached session will offer an interactive PDB prompt when the breakpoint is hit.
You may be able to detach from the container with the Ctrl-P, Ctrl-Q key sequence.
If that doesn't work, you will have either close your terminal window or
stop the service with:
make dev.stop.<service>You can bring that same service back up with:
make dev.up.<service>After entering a shell for the appropriate service via make lms-shell or
make studio-shell, you can run any of the usual paver commands from the
edx-platform testing documentation. Examples:
paver run_quality
paver test_a11y
paver test_bokchoy
paver test_js
paver test_lib
paver test_pythonTests can also be run individually. Example:
pytest openedx/core/djangoapps/user_apiTests can also be easily run with a shortcut from the host machine, so that you maintain your command history:
./in lms pytest openedx/core/djangoapps/user_apiIf you want to see the browser being automated for JavaScript or bok-choy tests, you can connect to the container running it via VNC.
| Browser | VNC connection |
|---|---|
| Firefox (Default) | vnc://0.0.0.0:25900 |
| Chrome (via Selenium) | vnc://0.0.0.0:15900 |
On macOS, enter the VNC connection string in the address bar in Safari to
connect via VNC. The VNC passwords for both browsers are randomly generated and
logged at container startup, and can be found by running make vnc-passwords.
Most tests are run in Firefox by default. To use Chrome for tests that normally
use Firefox instead, prefix the test command with
SELENIUM_BROWSER=chrome SELENIUM_HOST=edx.devstack.chrome.
To run the base set of end-to-end tests for edx-platform, run the following make target:
make e2e-testsIf you want to use some of the other testing options described in the edx-e2e-tests README, you can instead start a shell for the e2e container and run the tests manually via paver:
make e2e-shell
paver e2e_testThe browser running the tests can be seen and interacted with via VNC as described above (Firefox is used by default).
If you are having trouble with your containers, this sections contains some troubleshooting tips.
If a container stops unexpectedly, you can look at its logs for clues:
make dev.logs.<service>
Make sure you have the latest code and Docker images.
Pull the latest Docker images by running the following command from the devstack directory:
make dev.pullPull the latest Docker Compose configuration and provisioning scripts by running the following command from the devstack directory:
git pullLastly, the images are built from the master branches of the application repositories (e.g. edx-platform, ecommerce, etc.). Make sure you are using the latest code from the master branches, or have rebased your branches on master.
Sometimes containers end up in strange states and need to be rebuilt. Run
make dev.down to remove all containers and networks. This will NOT remove your
data volumes.
Sometimes you just aren't sure what's wrong, if you would like to hit the reset button
run make dev.reset.
Running this command will perform the following steps:
- Bring down all containers
- Reset all git repositories to the HEAD of master
- Pull new images for all services
- Compile static assets for all services
- Run migrations for all services
This does not delete your data and you do not need to re-provision after running it. It can be good to try this before asking for help.
If you botched a migration for a service, or just want to start with a clean database for a service without re-provisioning every single service, you can drop that service's database and re-provision it.
- Drop the correct database (see
provision.sqlfor the full list of database names):
make dev.drop-db.<database>- Re-provision the service(s):
make dev.provision.<services>For example, if you messed up just your Course Discovery and Registrar databases, you could try running:
make dev.drop-db.discovery
make dev.drop-db.registrar
make dev.provision.discovery+registrarIf you want to completely start over, run make dev.destroy. This will remove
all containers, networks, AND data volumes, requiring you to re-provision.
If you notice that the ownership of some (maybe all) files have changed and you
need to enter your root password when editing a file, you might
have pulled changes to the remote repository from within a container. While running
git pull, git changes the owner of the files that you pull to the user that runs
that command. Within a container, that is the root user - so git operations
should be ran outside of the container.
To fix this situation, change the owner back to yourself outside of the container by running:
$ sudo chown <user>:<group> -R .Most of the paver commands require a settings flag. If omitted, the flag defaults to
devstack. If you run into issues running paver commands in a docker container, you should append
the devstack_docker flag. For example:
$ paver update_assets --settings=devstack_dockerWhile running make static within the ecommerce container you could get an error
saying:
Error: Error: EBUSY: resource busy or locked, rmdir '/edx/app/ecommerce/ecommerce/ecommerce/static/build/'To fix this, remove the directory manually outside of the container and run the command again.
If you see the error no space left on device, Docker has run
out of space in its Docker.qcow2 file.
Here is an example error while running make dev.pull:
...
32d52c166025: Extracting [==================================================>] 1.598 GB/1.598 GB
ERROR: failed to register layer: Error processing tar file(exit status 1): write /edx/app/edxapp/edx-platform/.git/objects/pack/pack-4ff9873be2ca8ab77d4b0b302249676a37b3cd4b.pack: no space left on device
make: *** [pull] Error 1Try this first to clean up dangling images:
docker system prune -f # (This is very safe, so try this first.)If you are still seeing issues, you can try cleaning up dangling volumes.
- Bring up all containers.
make dev.upRemove all unused volumes. Warning: this will remove all Docker data on your system that is not currently in use by a container, which is why it's important to run the previous step. Otherwise, this will wipe out your Devstack data.
docker volume prune -f
While provisioning, some have seen the following error:
...
cwd = os.getcwdu()
OSError: [Errno 2] No such file or directory
make: *** [dev.provision.services] Error 1This issue can be worked around, but there's no guaranteed method to do so. Rebooting and restarting Docker does not seem to correct the issue. It may be an issue that is exacerbated by our use of sync (which typically speeds up the provisioning process on Mac), so you can try the following:
# repeat the following until you get past the error.
make stop
make dev.provisionOnce you get past the issue, you should be able to continue to use sync versions of the make targets.
While provisioning, some have seen the following error:
...
Build failed running pavelib.assets.update_assets: Subprocess return code: 137This error is an indication that your docker process died during execution. Most likely, this error is due to running out of memory. Try increasing the memory allocated to Docker.
On the Mac, this often manifests as the hyperkit process using a high
percentage of available CPU resources. To identify the container(s)
responsible for the CPU usage:
make dev.statsOnce you've identified a container using too much CPU time, check its logs; for example:
make dev.logs.lmsThe most common culprit is an infinite restart loop where an error during
service startup causes the process to exit, but we've configured
docker-compose to immediately try starting it again (so the container will
stay running long enough for you to use a shell to investigate and fix the
problem). Make sure the set of packages installed in the container matches
what your current code branch expects; you may need to rerun pip on a
requirements file or pull new container images that already have the required
package versions installed.
When trying to check out a branch, you may see an error like this:
git checkout jj/REV-666-implement-evil-feature > error: pathspec 'jj/REV-666-implement-evil-feature' did not match any file(s) known to git
If you are sure you have (i) recently run git fetch and (ii) didn't misspell the
branch name, then it is possible your repository is set in "single-branch" mode, meaning
that it is configured to only fetch master. Although devstack currently clones services'
repositories with all their branches, devstacks provisioned before September 2020
will start out with single-branch repositories. You check if your repository is in this
state by running git branch -r. If you only see a couple of entries
(origin/master and origin/HEAD), then your local repository is in single-branch
mode.
You can manually reconfigure your repository to pull all branches by running these commands from within the repository:
git config remote.origin.fetch "+refs/heads/*:refs/remotes/origin/*" git fetch origin git checkout jj/REV-666-implement-evil-feature > Switched to branch 'jj/REV-666-implement-evil-feature'.
git is powerful but complex; you may occasionally find your respository in a
confusing state. This problem isn't devstack-specific.
If you find yourself stuck, folks in the edX-internal or Open edX Slack workspaces may be able to give you a hand.
Alternatively, if you are at a roadblock and don't care about any changes you've made to your local copy of the repository (i.e., you have pushed or otherwise saved your work elsewhere) then you can always delete the repository and start over again:
rm -rf ./<repository> git clone [email protected]:edx/<repository>
Finally, if you regularly find yourself mystified by git, consider reading
through Understanding Git Conceptually. It explains core Git principles in way
that makes it easier to use the simpler git commands more effectively
and easier to use the more complicated git commands when you have to.
The option to use docker with nfs on mac was added recently. This can potentially increase performance in mac osx. However, this option is still in testing phase. If you find any corrections that should be made, please start a PR with corrections.
NOTE:
docker-sync is no longer actively supported. See section for nfs above for possible alternative.
Docker for Mac has known filesystem issues that significantly decrease performance for certain use cases, for example running tests in edx-platform. To improve performance, Docker Sync can be used to synchronize file data from the host machine to the containers.
Many developers have opted not to use Docker Sync because it adds complexity and can sometimes lead to issues with the filesystem getting out of sync.
You can swap between using Docker Sync and native volumes at any time, by using the make targets with or without 'sync'. However, this is harder to do quickly if you want to switch inside the PyCharm IDE due to its need to rebuild its cache of the containers' virtual environments.
If you are using macOS, please follow the Docker Sync installation instructions before provisioning.
Check your version and make sure you are running 0.4.6 or above:
docker-sync --versionIf not, upgrade to the latest version:
gem update docker-syncIf you are having issues with docker sync, try the following:
make stop
docker-sync stop
docker-sync cleanThe performance improvements provided by cached consistency mode for volume mounts introduced in Docker CE Edge 17.04 are still not good enough. It's possible that the "delegated" consistency mode will be enough to no longer need docker-sync, but this feature hasn't been fully implemented yet (as of Docker 17.12.0-ce, "delegated" behaves the same as "cached"). There is a GitHub issue which explains the current status of implementing delegated consistency mode.
Currently, some containers rely on Elasticsearch 7 and some rely on Elasticsearch 1.5. This is because services are in the process of being upgraded to Elasticsearch 7, but not all of them support Elasticsearch 7 yet. As we complete these migrations, we will update the dependencies of these containers.
The file options.mk sets several configuration options to default values.
For example DEVSTACK_WORKSPACE (the folder where your Git repos are expected to be)
is set to this directory's parent directory by default,
and DEFAULT_SERVICES (the list of services that are provisioned and run by default)
is set to a fairly long list of services out of the box.
For more detail, refer to the comments in the file itself.
If you're feeling brave, you can create an git-ignored overrides file called
options.local.mk in the same directory and set your own values. In general,
it's good to bring down containers before changing any settings.
The COMPOSE_PROJECT_NAME variable is used to define Docker namespaced volumes
and network based on this value, so changing it will give you a separate set of databases.
This is handled for you automatically by setting the OPENEDX_RELEASE environment variable in options.mk
(e.g. COMPOSE_PROJECT_NAME=devstack-juniper.master. Should you want to manually override this, edit the options.local.mk in the root of this repo and create the file if it does not exist. Change the devstack project name by adding the following line:
COMPOSE_PROJECT_NAME=<your-alternate-devstack-name>(e.g.COMPOSE_PROJECT_NAME=secondarydevstack)
As a specific example, if OPENEDX_RELEASE is set in your environment as juniper.master, then COMPOSE_PROJECT_NAME will default to devstack-juniper.master instead of devstack.