From 92ffabf9cff12a632af62960543d2e1ef60b4664 Mon Sep 17 00:00:00 2001
From: Kai Wei <kwei@cern.ch>
Date: Thu, 2 Jun 2022 10:36:09 -0400
Subject: [PATCH] siteSetting added

---
 Gui/siteSettings.py | 39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Gui/siteSettings.py

diff --git a/Gui/siteSettings.py b/Gui/siteSettings.py
new file mode 100644
index 000000000..c50b5a1f4
--- /dev/null
+++ b/Gui/siteSettings.py
@@ -0,0 +1,39 @@
+######################################################################
+# To be edited by expert as default setting for Hardware configuration
+######################################################################
+# default FC7 boardName
+defaultFC7 = "fc7.board.1"
+# default IP address of IP address
+defaultFC7IP = '192.168.1.80'
+# default fpga config
+defaultFPGAConfig = 'IT-uDTC_L12-KSU-3xQUAD_L8-KSU2xQUAD_x1G28'
+# default FMC board number
+defaultFMC = '0'
+# default USB port for HV power supply
+defaultUSBPortHV = ["ASRL/dev/ttyUSBHV::INSTR"]
+# default model for HV power supply
+defaultHVModel = ["Keithley 2410 (RS232)"]
+# default USB port for LV power supply
+defaultUSBPortLV = ["ASRL/dev/ttyUSBLV::INSTR"]
+# default model for LV power supply
+defaultLVModel = ["KeySight E3633 (RS232)"]
+# default model for LV power supply
+defaultLVModel = ["KeySight E3633 (RS232)"]
+# default mode for LV powering (Direct,SLDO,etc)
+defaultPowerMode = "Direct"
+defaultVoltageMap = {
+    "Direct" : 1.28,
+    "SLDO"   : 1.85
+}
+#default BaudRate for Arduino sensor
+defaultSensorBaudRate = 115200
+#default DBServerIP
+defaultDBServerIP = '127.0.0.1'
+#default DBName
+defaultDBName = 'SampleDB'
+
+##### The following settings are for SLDO scans developed for Purdue.#####
+##### Do not modify these settings unless you know what you are doing.####
+#default settings for SLDO scan.
+defaultSLDOscanVoltage = 0.0
+defaultSLDOscanMaxCurrent = 0.0
\ No newline at end of file