diff --git a/examples/Lab Examples/SmartRock_Workshop/SmartRock_Workshop.ino b/examples/Lab Examples/SmartRock_Workshop/SmartRock_Workshop.ino
new file mode 100644
index 000000000..1fa69959f
--- /dev/null
+++ b/examples/Lab Examples/SmartRock_Workshop/SmartRock_Workshop.ino	
@@ -0,0 +1,133 @@
+///////////////////////////////////////////////////////////////////////////////
+
+// This is a basic example that demonstrates usage of the Hypnos board
+// Deep sleep functionality.
+
+// The Hypnos board includes
+// - SD
+// - DS3231 RTC
+// - Ability to power of peripherals
+
+// Further details about the Hypnos board can be found here:
+// https://github.com/OPEnSLab-OSU/OPEnS-Lab-Home/wiki/Hypnos
+
+///////////////////////////////////////////////////////////////////////////////
+
+#include <Loom.h>
+
+// Include configuration
+const char* json_config = 
+#include "config.h"
+;
+
+// Set enabled modules
+LoomFactory<
+	Enable::Internet::Disabled,
+	Enable::Sensors::Enabled,
+	Enable::Radios::Enabled,
+	Enable::Actuators::Enabled,
+	Enable::Max::Enabled
+> ModuleFactory{};
+
+LoomManager Loom{ &ModuleFactory };
+
+
+const int switchPin = 9;
+int switchPos = 0;
+
+volatile bool rtc_flag = false;
+
+void wakeISR_RTC() {
+	// disable the interrupt
+	detachInterrupt(12);
+	rtc_flag = true;
+}
+
+void setup() 
+{
+
+  pinMode(switchPin, INPUT);
+	// Needs to be done for Hypno Board
+	pinMode(5, OUTPUT);		// Enable control of 3.3V rail 
+	pinMode(6, OUTPUT);		// Enable control of 5V rail 
+	pinMode(12, INPUT_PULLUP);		// Enable waiting for RTC interrupt, MUST use a pullup since signal is active low
+  pinMode(13, OUTPUT);
+
+  //digitalWrite(switchPin, HIGH);
+	//See Above
+	digitalWrite(5, LOW);	// Enable 3.3V rail
+	digitalWrite(6, HIGH);	// Enable 5V rail
+  digitalWrite(13, LOW);
+
+	Loom.begin_serial(true);
+	Loom.parse_config(json_config);
+	Loom.print_config();
+
+	// Register an interrupt on the RTC alarm pin
+	Loom.InterruptManager().register_ISR(12, wakeISR_RTC, LOW, ISR_Type::IMMEDIATE);
+
+	LPrintln("\n ** Setup Complete ** ");
+	Serial.flush();
+}
+
+
+void loop() 
+{
+  //re-enable pin upon wake up
+  pinMode(switchPin, INPUT);
+  
+  /////////////////////////////////////////////
+  //change interval depending the on position of pin
+  //interval is the variable that gets passed to TimeSpan function below
+  switchPos = digitalRead(switchPin);
+  int secs = 0;
+  int mins = 0;
+  if (switchPos == HIGH) {
+    mins = 1200;
+  }else{
+    secs = 1;
+  }
+  /////////////////////////////////////////////
+  
+	digitalWrite(5, LOW); // Disable 3.3V rail
+  digitalWrite(6, HIGH);  // Disable 5V rail
+  digitalWrite(13, HIGH);
+
+	// As it turns out, if the SD card is initialized and you change
+	// the states of the pins to ANY VALUE, the SD card will fail to
+	// write. As a result, we ensure that the board has been turned
+	// off at least once before we make any changes to the pin states
+	if (rtc_flag) {
+		pinMode(23, OUTPUT);
+		pinMode(24, OUTPUT);
+		pinMode(10, OUTPUT);
+
+    delay(1000);
+
+		Loom.power_up();
+	}
+
+  
+	Loom.measure();
+	Loom.package();
+	Loom.display_data();
+	Loom.SDCARD().log();
+
+	// set the RTC alarm to a duration of 10 seconds with TimeSpan
+	Loom.InterruptManager().RTC_alarm_duration(TimeSpan(0,0,mins,secs));
+	Loom.InterruptManager().reconnect_interrupt(12);
+
+  digitalWrite(13, LOW);
+	digitalWrite(5, HIGH); // Enable 3.3V rail
+	digitalWrite(6, LOW);  // Enable 5V rail
+	pinMode(23, INPUT);
+	pinMode(24, INPUT);
+	pinMode(10, INPUT);
+
+	// Sleep Manager autmatically calls power_down on every sensor before sleeping
+	// And power_up after waking.
+
+  rtc_flag = false;
+	Loom.SleepManager().sleep();
+	while (!rtc_flag);
+}
diff --git a/examples/Lab Examples/SmartRock_Workshop/config.h b/examples/Lab Examples/SmartRock_Workshop/config.h
new file mode 100644
index 000000000..877da35ed
--- /dev/null
+++ b/examples/Lab Examples/SmartRock_Workshop/config.h	
@@ -0,0 +1,33 @@
+"{\
+	'general':\
+	{\
+		'name':'Device',\
+		'instance':1\
+	},\
+	'components':[\
+		{\
+			'name':'Analog',\
+			'params':[8,12,true,false,true,false,false,false,5,0,4,0,0,0]\
+		},\
+		{\
+			'name':'SD',\
+			'params': [true,1000,10,'data',true]\
+		},\
+		{\
+			'name':'DS3231',\
+			'params':[11, true]\
+		},\
+		{\
+			'name':'Interrupt_Manager',\
+			'params':'default'\
+		},\
+		{\
+			'name':'Sleep_Manager',\
+			'params':[true,false,1]\
+		},\
+    {\
+      'name':'MS5803',\
+      'params':[119]\
+    }\
+	]\
+}"
diff --git a/src/Sensors/Analog.cpp b/src/Sensors/Analog.cpp
index 57115ad3e..8da97bcc9 100644
--- a/src/Sensors/Analog.cpp
+++ b/src/Sensors/Analog.cpp
@@ -305,7 +305,7 @@ float Loom_Analog::convert_turbidity(const uint16_t analog) const
 	// return -1120.4 * (voltage * voltage) + (5742.3 * voltage) - 4352.9;
 
 
-	return analog // turbidity values are fairly qualitative, just returning the analog value for now
+	return analog; // turbidity values are fairly qualitative, just returning the analog value for now
 }
 
 ///////////////////////////////////////////////////////////////////////////////