README.md

rc-lock-replica

Remote-controlled prop replica lock 🔓

This project is inspired by The Replica Prop Forum thread by JohnnyNeutron which in turn was inspired by The Amazing Spider-Man 2 (2014) feature film, and consists of a simple Arduino C++ software script and a step-by-step guide (coming soon) on how to create the prop replica using Arduino Uno hardware and other assorted tools.

Warning: This is just a hobby project and provides absolutely no warranty of any kind. Use at your own risk!

Table of Contents

• Table of Contents
• Features
  • Upcoming
• Requirements
  • Software
  • Tools
  • Hardware
• Installation
  • Configuration
• Usage
  • Examples
• Resources
• Development
  • Future
  • History
  • Community
• Credits
• License

Features

• 315MHz Receiver/Transmitter Support
• L12-R Micro Linear Servo Support
• SG92R Micro Servo Support

Upcoming

• Prop Replica Step-By-Step Guide
• Spektrum AR500 Receiver Support
• Spektrum DX5e Transmitter Support

Requirements

Software

• Arduino IDE

Tools

• Power Drill and Drill/Driver Bits
• Rotary Tool, Cut-Off Wheels, and Sanding Drums
• Hot Glue Gun and Glue Sticks
• Soldering Iron and Solder (Recommended)

Hardware

• U 9997 Keyed Bolt Lock
• 315MHz RF Momentary Receiver
• 315MHz RF Keyfob Transmitter
• Connecting Arm 3D Printer STL
• Linear Servo Kit (Choose one of two options):
  1. L12-R Micro Linear Servo
  2. ProtonRev2 Linear Servo Extender for SG92R Micro Servo
• Arduino Uno Rev3 Micro controller
• Arduino Uno Power Supply
• 170 Point Mini Breadboard
• 4 3/4" x 4 3/4" x 1/2" Plate
• 1/2" Pipe Strap or similar
• Screws, Nuts, and Bolts
• 22 AWG Solid-core Wire
• 315MHz Spring Antenna (Recommended)
• Arduino Uno Case (Optional)
• Spektrum AR500 Receiver (Optional)
• Spektrum DX5e Transmitter (Optional)

Installation

$ mkdir -vp ~/sketchbook
mkdir: created directory '~/sketchbook'
$ cd ~/sketchbook
$ git clone https://github.com/NathanUrwin/rc-lock-replica.git
Cloning into 'rc-lock-replica'...
remote: Counting objects: 132, done.
remote: Compressing objects: 100% (3/3), done.
remote: Total 132 (delta 0), reused 1 (delta 0), pack-reused 129
Receiving objects: 100% (132/132), 31.08 MiB | 2.40 MiB/s, done.
Resolving deltas: 100% (56/56), done.

Configuration

Set bool L12_R_SERVO to true or false in RcLock.ino.

Usage

1. Run the Arduino IDE.
2. Select File > Sketchbook > rc-lock-replica > src > RcLock.
3. Setup and Connect the Arduino board to PC.
4. Compile and Upload to the Arduino board.
5. Mount your new door lock and try it out!

Examples

Resources

• The RPF Original Thread
• Arduino Servo Reference

Development

See CONTRIBUTING

Future

See ROADMAP

History

See CHANGELOG

Community

See CODE OF CONDUCT

Credits

See AUTHORS

License

See LICENSE