Support for other debian versions

[romarcg]

How can nvidia-docker2, nvidia-container-runtime be installed in other linux distributions not listed in the webpage

I have been trying to install docker-nvidia2 in Debian (8) Jessie without success. I am able to install 17.12.0ce-0debian. As I don't see any mention of "other supported distributions", I wonder if is this installation possible?

So far when I try to install nvidia-container-runtime I get a dependency error:

nvidia-container-runtime : Depends: libseccomp2 (>= 2.3.0) but 2.1.1-1 is to be installed

I am using the repository configuration instructions fro Debian Stretch. I could not find a supported entry for Jessie.

Information:

• Kernel version from uname -a

Linux venus 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux

• Driver information from nvidia-smi -a
  ==============NVSMI LOG==============

Timestamp : Mon Jan 22 15:18:54 2018
Driver Version : 367.57

Attached GPUs : 4
GPU 0000:05:00.0
Product Name : Tesla K80
Product Brand : Tesla
Display Mode : Disabled
Display Active : Disabled
Persistence Mode : Enabled
Accounting Mode : Disabled
Accounting Mode Buffer Size : 1920
Driver Model
Current : N/A
Pending : N/A
Serial Number : 0320615095340
GPU UUID : GPU-8e8014b7-333e-7895-50c3-1922fb19e3ac
Minor Number : 0
VBIOS Version : 80.21.1B.00.01
MultiGPU Board : Yes
Board ID : 0x300
GPU Part Number : 900-22080-0000-000
Inforom Version
Image Version : 2080.0200.00.04
OEM Object : 1.1
ECC Object : 3.0
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
GPU Virtualization Mode
Virtualization mode : None
PCI
Bus : 0x05
Device : 0x00
Domain : 0x0000
Device Id : 0x102D10DE
Bus Id : 0000:05:00.0
Sub System Id : 0x106C10DE
GPU Link Info
PCIe Generation
Max : 3
Current : 1
Link Width
Max : 16x
Current : 16x
Bridge Chip
Type : N/A
Firmware : N/A
Replays since reset : 0
Tx Throughput : N/A
Rx Throughput : N/A
Fan Speed : N/A
Performance State : P8
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
Sync Boost : Not Active
Unknown : Not Active
FB Memory Usage
Total : 12205 MiB
Used : 0 MiB
Free : 12205 MiB
BAR1 Memory Usage
Total : 16384 MiB
Used : 2 MiB
Free : 16382 MiB
Compute Mode : Default
Utilization
Gpu : 0 %
Memory : 0 %
Encoder : 0 %
Decoder : 0 %
Ecc Mode
Current : Disabled
Pending : Disabled
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
Total : N/A
Retired Pages
Single Bit ECC : 0
Double Bit ECC : 0
Pending : No
Temperature
GPU Current Temp : 37 C
GPU Shutdown Temp : 93 C
GPU Slowdown Temp : 88 C
Power Readings
Power Management : Supported
Power Draw : 26.20 W
Power Limit : 149.00 W
Default Power Limit : 149.00 W
Enforced Power Limit : 149.00 W
Min Power Limit : 100.00 W
Max Power Limit : 175.00 W
Clocks
Graphics : 324 MHz
SM : 324 MHz
Memory : 324 MHz
Video : 405 MHz
Applications Clocks
Graphics : 562 MHz
Memory : 2505 MHz
Default Applications Clocks
Graphics : 562 MHz
Memory : 2505 MHz
Max Clocks
Graphics : 875 MHz
SM : 875 MHz
Memory : 2505 MHz
Video : 540 MHz
Clock Policy
Auto Boost : On
Auto Boost Default : On
Processes : None
...

• Docker version from docker version

Docker version 17.12.0-ce, build c97c6d6

• NVIDIA packages version from dpkg -l '*nvidia*' or rpm -qa '*nvidia*'

Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-====================-===============-===============-==============================================
un bumblebee-nvidia (no description available)
un libgl1-nvidia-altern (no description available)
un libgl1-nvidia-glx (no description available)
un libglx-nvidia-altern (no description available)
ii libnvidia-container- 1.0.0alpha.2-1 amd64 NVIDIA container runtime library (command-line
ii libnvidia-container1 1.0.0alpha.2-1 amd64 NVIDIA container runtime library
rc nvidia-346 346.46-0ubuntu1 amd64 NVIDIA binary driver - version 346.46
un nvidia-346-uvm (no description available)
un nvidia-alternative (no description available)
ii nvidia-container-run 1.1.1+docker17. amd64 NVIDIA container runtime
un nvidia-current (no description available)
un nvidia-docker (no description available)
ii nvidia-docker2 2.0.2+docker17. all nvidia-docker CLI wrapper
un nvidia-driver (no description available)
un nvidia-driver-binary (no description available)
un nvidia-glx (no description available)
un nvidia-glx-dev (no description available)
un nvidia-glx-ia32 (no description available)
un nvidia-glx-legacy-17 (no description available)
un nvidia-glx-legacy-17 (no description available)
un nvidia-glx-legacy-71 (no description available)
un nvidia-glx-legacy-71 (no description available)
un nvidia-glx-legacy-96 (no description available)
un nvidia-glx-legacy-96 (no description available)
un nvidia-installer-cle (no description available)
un nvidia-kernel-340.65 (no description available)
un nvidia-kernel-dkms (no description available)
un nvidia-kernel-source (no description available)
un nvidia-libopencl1-34 (no description available)
un nvidia-libopencl1-de (no description available)
un nvidia-libvdpau1-ia3 (no description available)
un nvidia-opencl-icd (no description available)
rc nvidia-opencl-icd-34 346.46-0ubuntu1 amd64 NVIDIA OpenCL ICD
un nvidia-persistenced (no description available)
un nvidia-prime (no description available)
un nvidia-settings (no description available)
un nvidia-support (no description available)
un nvidia-va-driver (no description available)
un nvidia-vdpau-driver (no description available)
rc xserver-xorg-video-n 340.65-2 amd64 NVIDIA binary Xorg driver
un xserver-xorg-video-n (no description available)

• NVIDIA container library version from nvidia-container-cli -V

version: 1.0.0
build date: 2017-10-30T23:47+00:00
build revision: ec15c7233bd2de821ad5127cb0de6b52d9d2083c
build compiler: gcc-5 5.4.0 20160609
build flags: -D_GNU_SOURCE -D_FORTIFY_SOURCE=2 -DNDEBUG -std=gnu11 -O2 -g -fdata-sections -ffunction-sections -fstack-protector -fno-strict-aliasing -fvisibility=hidden -Wall -Wextra -Wcast-align -Wpointer-arith -Wmissing-prototypes -Wnonnull -Wwrite-strings -Wlogical-op -Wformat=2 -Wmissing-format-attribute -Winit-self -Wshadow -Wstrict-prototypes -Wunreachable-code -Wconversion -Wsign-conversion -Wno-unknown-warning-option -Wno-format-extra-args -Wno-gnu-alignof-expression -Wl,-zrelro -Wl,-znow -Wl,-zdefs -Wl,--gc-sections

• Docker command, image and tag used

docker run --runtime=nvidia --rm nvidia/cuda:8.0-cudnn6-devel nvidia-smi

docker: Error response from daemon: OCI runtime create failed: container_linux.go:296: starting container process caused "process_linux.go:398: container init caused "process_linux.go:381: running prestart hook 1 caused \"error running hook: exit status 1, stdout: , stderr: exec command: [/usr/bin/nvidia-container-cli --load-kmods configure --ldconfig=@/sbin/ldconfig --device=all --compute --utility --require=cuda>=8.0 --pid=10934 /var/lib/docker/aufs/mnt/f70de535aadabae5cfa0daa675960b80983c38c60a3deb925bbf589640e68110]\\nnvidia-container-cli: ldcache error: process /sbin/ldconfig failed with error code: 127\\n\""": unknown.

[adampl]

Any update on this issue?

[3XX0]

Closing as there are packages for debian 8.