diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h index 9211a6a793bf..ff36796207aa 100644 --- a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -27,7 +27,7 @@ #include "env_validate.h" -#define BOARD_INFO_NAME "AZSMZ MINI" +#define BOARD_INFO_NAME "AZSMZ Mini" // // Servos @@ -76,6 +76,7 @@ // // Heaters / Fans // + // EFB #define HEATER_0_PIN P2_04 #define HEATER_BED_PIN P2_05 @@ -117,14 +118,14 @@ // // Ethernet pins // +#define REF_CLK P1_15 #define ENET_MDIO P1_17 -#define ENET_RX_ER P1_14 -#define ENET_RXD1 P1_10 #define ENET_MOC P1_16 -#define REF_CLK P1_15 -#define ENET_RXD0 P1_09 #define ENET_CRS P1_08 +#define ENET_RX_ER P1_14 #define ENET_TX_EN P1_04 +#define ENET_RXD0 P1_09 +#define ENET_RXD1 P1_10 #define ENET_TXD0 P1_00 #define ENET_TXD1 P1_01 diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h index b74870b30fef..6404fbbf2532 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h @@ -53,26 +53,25 @@ #define E0_ENABLE_PIN P2_12 -/** - * ------ ------ - * NC | 1 2 | GND 5V | 1 2 | GND - * RESET | 3 4 | 1.31 NC | 3 4 | NC - * 0.18 | 5 6 3.25 NC | 5 6 0.15 - * 1.23 | 7 8 | 3.26 0.16 | 7 8 | 0.18 - * 0.15 | 9 10 | 0.17 2.11 | 9 10 | 1.30 - * ------ ------ - * EXP2 EXP1 +/** ------ ------ + * 1.30 |10 9 | 2.11 0.17 |10 9 | 0.15 + * 0.18 | 8 7 | 0.16 3.26 | 8 7 | 1.23 + * 0.15 6 5 | NC 3.25 6 5 | 0.18 + * NC | 4 3 | NC 1.31 | 4 3 | RESET + * GND | 2 1 | 5V GND | 2 1 | NC + * ------ ------ + * EXP1 EXP2 */ -#define EXP1_03_PIN -1 -#define EXP1_04_PIN -1 -#define EXP1_05_PIN -1 +#define EXP1_03_PIN -1 // NC +#define EXP1_04_PIN -1 // NC +#define EXP1_05_PIN -1 // NC #define EXP1_06_PIN P0_15 #define EXP1_07_PIN P0_16 #define EXP1_08_PIN P0_18 #define EXP1_09_PIN P2_11 #define EXP1_10_PIN P1_30 -#define EXP2_03_PIN -1 +#define EXP2_03_PIN -1 // RESET #define EXP2_04_PIN P1_31 #define EXP2_05_PIN P0_18 #define EXP2_06_PIN P3_25 diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index d1d1eccc458c..a9701bc8b522 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -215,6 +215,9 @@ * that the garbage/lines are erased immediately after the SD card accesses are completed. */ +// +// LCD / Controller +// #if IS_TFTGLCD_PANEL #if ENABLED(TFTGLCD_PANEL_SPI) @@ -341,10 +344,8 @@ #endif // UNUSED -#define PIN_P0_27 P0_27 // EXP2/Onboard SD -#define PIN_P0_28 P0_28 // EXP2 -#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) -#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_02 P0_02 // AUX1 (Interrupt Capable/ADC/Serial Port 0) +//#define PIN_P0_03 P0_03 // AUX1 (Interrupt Capable/ADC/Serial Port 0) /** * PWMs diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index a8a4d2de4e20..124f0301b180 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -255,15 +255,14 @@ #define LED4_PIN P1_21 #endif -/** - * ----- ----- - * (BEEPER) 1.31 | · · | 1.30 (BTN_ENC) (MISO) 0.8 | · · | 0.7 (SD_SCK) - * (LCD_EN) 0.18 | · · | 0.16 (LCD_RS) (BTN_EN1) 3.25 | · · | 0.28 (SD_CS2) - * (LCD_D4) 0.15 | · · | 0.17 (LCD_D5) (BTN_EN2) 3.26 | · · | 0.9 (SD_MOSI) - * (LCD_D6) 1.0 | · · | 1.22 (LCD_D7) (SD_DETECT) 0.27 | · · | RST - * GND | · · | 5V GND | · · | NC - * ----- ----- - * EXP1 EXP2 +/** ------ ------ + * (BEEPER) 1.31 |10 9 | 1.30 (BTN_ENC) (MISO) 0.8 |10 9 | 0.7 (SD_SCK) + * (LCD_EN) 0.18 | 8 7 | 0.16 (LCD_RS) (BTN_EN1) 3.25 | 8 7 | 0.28 (SD_CS2) + * (LCD_D4) 0.15 | 6 5 | 0.17 (LCD_D5) (BTN_EN2) 3.26 | 6 5 | 0.9 (SD_MOSI) + * (LCD_D6) 1.0 | 4 3 | 1.22 (LCD_D7) (SD_DETECT) 0.27 | 4 3 | RST + * GND | 2 1 | 5V GND | 2 1 | NC + * ------ ------ + * EXP1 EXP2 */ #define EXP1_03_PIN P1_22 #define EXP1_04_PIN P1_00 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index 5d23466071a3..6aa3372b3fa3 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -96,7 +96,7 @@ /** ------ ------ * (BEEPER) PC10 |10 9 | PC11 (BTN_ENC) (MISO) PB4 |10 9 | PB3 (SCK) * (LCD_EN) PB6 | 8 7 | PC12 (LCD_RS) (BTN_EN1) PD2 | 8 7 | PA15 (SD_SS) - * (LCD_D4) PC13 | 6 5 | PB7 (LCD_D5) (BTN_EN2) PB8 | 6 5 | PB5 (MOSI) + * (LCD_D4) PC13 6 5 | PB7 (LCD_D5) (BTN_EN2) PB8 6 5 | PB5 (MOSI) * (LCD_D6) PC15 | 4 3 | PC14 (LCD_D7) (SD_DETECT) PB9 | 4 3 | RESET * GND | 2 1 | 5V GND | 2 1 | NC * ------ ------ diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h index 7694130a3eee..6062755d3c89 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -165,7 +165,7 @@ * ------ * PC6 |10 9 | PB2 * PB10 | 8 7 | PE8 - * PB14 | 6 5 | PB13 + * PB14 6 5 | PB13 * PB12 | 4 3 | PB15 * GND | 2 1 | 5V * ------ @@ -189,7 +189,7 @@ * ------ * ? |10 9 | PC5 * PB10 | 8 7 | ? - * PA6 | 6 5 | PA5 + * PA6 6 5 | PA5 * PA4 | 4 3 | PA7 * GND | 2 1 | 5V * ------ diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h index f850b4a90b07..67174556926b 100644 --- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h +++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h @@ -294,13 +294,14 @@ #define TFT_BACKLIGHT_PIN PD13 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 // NE4 - #define FSMC_RS_PIN PD11 // A0 #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 - #define TFT_CS_PIN TFT_CS_PIN - #define TFT_RS_PIN TFT_RS_PIN + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN #ifdef TFT_CLASSIC_UI #define TFT_MARLINBG_COLOR 0x3186 // Grey @@ -309,11 +310,14 @@ #define TFT_BTOKMENU_COLOR 0x145F // Cyan #endif #define TFT_BUFFER_SIZE 14400 + #elif HAS_GRAPHICAL_TFT + #define TFT_RESET_PIN PC6 #define TFT_BACKLIGHT_PIN PD13 #define TFT_CS_PIN PD7 // NE4 #define TFT_RS_PIN PD11 // A0 + #endif #if NEED_TOUCH_PINS diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index 2060ad86fe5b..0c2f2fc5db31 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -130,29 +130,39 @@ #define RGB_LED_B_PIN PB6 #endif -/* -* EXP1 pinout for the LCD according to Fysetcs schematic for the Cheetah board -* ----- -* (BEEPER) PC9 | 1 2 | PC12 (BTN_ENC) -* (BTN_EN2) PC11 | 3 4 | PB14 (LCD_RS / MISO) -* (BTN_EN1) PC10 5 6 | PB13 (SCK) -* (LCD_EN) PB12 | 7 8 | PB15 (MOSI) -* GND | 9 10| 5V -* ----- -* EXP1 -* Note: The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board. -* Note: Functionally the pins are assigned in the same order as on the Ender-3 board. -* Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board. -*/ +/** + * EXP1 pinout for the LCD according to FYSETC's Cheetah board schematic + * ------ + * (BEEPER) PC9 |10 9 | PC12 (BTN_ENC) + * (BTN_EN2) PC11 | 8 7 | PB14 (LCD_RS / MISO) + * (BTN_EN1) PC10 6 5 | PB13 (SCK) + * (LCD_EN) PB12 | 4 3 | PB15 (MOSI) + * GND | 2 1 | 5V + * ------ + * EXP1 + * + * Notes: + * - The pin-numbers match the connector correctly and are not in reverse order like on the Ender-3 board. + * - Functionally the pins are assigned in the same order as on the Ender-3 board. + * - Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board. + */ +#define EXP1_03_PIN PB15 +#define EXP1_04_PIN PB12 +#define EXP1_05_PIN PB13 +#define EXP1_06_PIN PC10 +#define EXP1_07_PIN PB14 +#define EXP1_08_PIN PC11 +#define EXP1_09_PIN PC12 +#define EXP1_10_PIN PC9 #if HAS_WIRED_LCD - #define BEEPER_PIN PC9 + #define BEEPER_PIN EXP1_10_PIN #if HAS_MARLINUI_U8GLIB - #define DOGLCD_A0 PB14 - #define DOGLCD_CS PB12 - #define DOGLCD_SCK PB13 - #define DOGLCD_MOSI PB15 + #define DOGLCD_A0 EXP1_07_PIN + #define DOGLCD_CS EXP1_04_PIN + #define DOGLCD_SCK EXP1_05_PIN + #define DOGLCD_MOSI EXP1_03_PIN //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 @@ -162,30 +172,30 @@ #endif #endif - #define LCD_PINS_RS PB12 // CS -- SOFT SPI for ENDER3 LCD - #define LCD_PINS_D4 PB13 // SCLK - #define LCD_PINS_ENABLE PB15 // DATA MOSI + #define LCD_PINS_RS EXP1_04_PIN // CS -- SOFT SPI for ENDER3 LCD + #define LCD_PINS_D4 EXP1_05_PIN // SCLK + #define LCD_PINS_ENABLE EXP1_03_PIN // DATA MOSI //#define LCD_CONTRAST_INIT 190 #if IS_NEWPANEL - #define BTN_EN1 PC10 - #define BTN_EN2 PC11 - #define BTN_ENC PC12 + #define BTN_EN1 EXP1_06_PIN + #define BTN_EN2 EXP1_08_PIN + #define BTN_ENC EXP1_09_PIN #endif #endif #if ENABLED(TOUCH_UI_FTDI_EVE) - #define BEEPER_PIN PC9 - #define CLCD_MOD_RESET PC11 - #define CLCD_SPI_CS PB12 + #define BEEPER_PIN EXP1_10_PIN + #define CLCD_MOD_RESET EXP1_08_PIN + #define CLCD_SPI_CS EXP1_04_PIN //#define CLCD_USE_SOFT_SPI // the Cheetah can use hardware-SPI so we do not really need this #if ENABLED(CLCD_USE_SOFT_SPI) - #define CLCD_SOFT_SPI_MOSI PB15 - #define CLCD_SOFT_SPI_MISO PB14 - #define CLCD_SOFT_SPI_SCLK PB13 + #define CLCD_SOFT_SPI_MOSI EXP1_03_PIN + #define CLCD_SOFT_SPI_MISO EXP1_07_PIN + #define CLCD_SOFT_SPI_SCLK EXP1_05_PIN #else #define CLCD_SPI_BUS 2 #endif diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index 4bf8da564f5c..da83ade4e094 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -195,7 +195,7 @@ * ------ ------ * PC9 |10 9 | PA8 PA6 |10 9 | PA5 * PC11 | 8 7 | PD2 PC6 | 8 7 | PA4 - * PC10 | 6 5 PC12 PC7 | 6 5 PA7 + * PC10 6 5 | PC12 PC7 6 5 | PA7 * PD0 | 4 3 | PD1 PB10 | 4 3 | RESET * GND | 2 1 | 5V GND | 2 1 | 5V * ------ ------ diff --git a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h index 38714d7da9c9..3b6a3f74f60e 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8.h @@ -237,7 +237,7 @@ * ------ ------ * (BEEPER) PB2 |10 9 | PE10 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK) * (LCD_EN) PE11 | 8 7 | PD10 (LCD_RS) (BTN_EN1) PE9 | 8 7 | PA4 (SPI1 CS) - * (LCD_D4) PD9 | 6 5 PD8 (LCD_D5) (BTN_EN2) PE8 | 6 5 PA7 (SPI1 MOSI) + * (LCD_D4) PD9 6 5 | PD8 (LCD_D5) (BTN_EN2) PE8 6 5 | PA7 (SPI1 MOSI) * (LCD_D6) PE15 | 4 3 | PE7 (LCD_D7) (SPI1_RS) PB11 | 4 3 | RESET * GND | 2 1 | 5V GND | 2 1 | 3.3V * ------ ------ diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index 88e2d1804e90..c28da7134746 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -215,8 +215,8 @@ // Onboard SD card // NOT compatible with LCD // -// detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled -#if !defined(SDCARD_CONNECTION) || SDCARD_CONNECTION == ONBOARD +// Detect pin doesn't work when ONBOARD and NO_SD_HOST_DRIVE disabled +#if SD_CONNECTION_IS(ONBOARD) #if USE_NEW_SPI_API #define SD_SPI MARLIN_SPI(HardwareSPI3, PC9) #else @@ -230,17 +230,44 @@ #define SD_DETECT_PIN PD12 #endif -/* +/** ------ ------ + * (BEEPER) PC5 |10 9 | PE13 (BTN_ENC) (SPI1 MISO) PA6 |10 9 | PA5 (SPI1 SCK) + * (LCD_EN) PD13 | 8 7 | PC6 (LCD_RS) (BTN_EN1) PE8 | 8 7 | PE10 (SPI1 CS) + * (LCD_D4) PE14 6 5 | PE15 (LCD_D5) (BTN_EN2) PE11 6 5 | PA7 (SPI1 MOSI) + * (LCD_D6) PD11 | 4 3 | PD10 (LCD_D7) (SPI DET) PE12 | 4 3 | RESET + * GND | 2 1 | 5V GND | 2 1 | 3.3V + * ------ ------ + * EXP1 EXP2 + */ +#define EXP1_03_PIN PD10 +#define EXP1_04_PIN PD11 +#define EXP1_05_PIN PE15 +#define EXP1_06_PIN PE14 +#define EXP1_07_PIN PC6 +#define EXP1_08_PIN PD13 +#define EXP1_09_PIN PE13 +#define EXP1_10_PIN PC5 + +#define EXP2_03_PIN -1 // RESET +#define EXP2_04_PIN PE12 +#define EXP2_05_PIN PA7 +#define EXP2_06_PIN PE11 +#define EXP2_07_PIN PE10 +#define EXP2_08_PIN PE8 +#define EXP2_09_PIN PA5 +#define EXP2_10_PIN PA6 + // // LCD SD // -#if SDCARD_CONNECTION == LCD +/* +#if SD_CONNECTION_IS(LCD) #define ENABLE_SPI1 - #define SDSS PE10 - #define SD_SCK_PIN PA5 - #define SD_MISO_PIN PA6 - #define SD_MOSI_PIN PA7 - #define SD_DETECT_PIN PE12 + #define SDSS EXP2_07_PIN + #define SD_SCK_PIN EXP2_09_PIN + #define SD_MISO_PIN EXP2_10_PIN + #define SD_MOSI_PIN EXP2_05_PIN + #define SD_DETECT_PIN EXP2_04_PIN #endif */ @@ -257,17 +284,6 @@ #define SPI_FLASH_SCK_PIN PB13 #endif -/** - * ----- ----- - * (BEEPER)PC5 | · · | PE13(BTN_ENC) (SPI1 MISO) PA6 | · · | PA5 (SPI1 SCK) - * (LCD_EN)PD13 | · · | PC6(LCD_RS) (BTN_EN1) PE8 | · · | PE10 (SPI1 CS) - * (LCD_D4)PE14 | · · | PE15(LCD_D5) (BTN_EN2) PE11 | · · | PA7 (SPI1 MOSI) - * (LCD_D6)PD11 | · · | PD10(LCD_D7) (SPI DET) PE12 | · · | RESET - * GND | · · | 5V GND | · · | 3.3V - * ----- ----- - * EXP1 EXP2 - */ - #if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) #ifndef TOUCH_CALIBRATION_X #define TOUCH_CALIBRATION_X -17253 @@ -285,21 +301,21 @@ #define TOUCH_ORIENTATION TOUCH_LANDSCAPE #endif - #define TFT_CS_PIN PD11 - #define TFT_SCK_PIN PA5 - #define TFT_MISO_PIN PA6 - #define TFT_MOSI_PIN PA7 - #define TFT_DC_PIN PD10 - #define TFT_RST_PIN PC6 + #define TFT_CS_PIN EXP1_04_PIN + #define TFT_SCK_PIN EXP2_09_PIN + #define TFT_MISO_PIN EXP2_10_PIN + #define TFT_MOSI_PIN EXP2_05_PIN + #define TFT_DC_PIN EXP1_03_PIN + #define TFT_RST_PIN EXP1_07_PIN #define TFT_A0_PIN TFT_DC_PIN - #define TFT_RESET_PIN PC6 - #define TFT_BACKLIGHT_PIN PD13 + #define TFT_RESET_PIN EXP1_07_PIN + #define TFT_BACKLIGHT_PIN EXP1_08_PIN #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 - #define LCD_BACKLIGHT_PIN PD13 + #define LCD_BACKLIGHT_PIN EXP1_08_PIN #ifndef TFT_WIDTH #define TFT_WIDTH 480 #endif @@ -307,15 +323,15 @@ #define TFT_HEIGHT 320 #endif - #define TOUCH_CS_PIN PE14 // SPI1_NSS - #define TOUCH_SCK_PIN PA5 // SPI1_SCK - #define TOUCH_MISO_PIN PA6 // SPI1_MISO - #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + #define TOUCH_CS_PIN EXP1_06_PIN // SPI1_NSS + #define TOUCH_SCK_PIN EXP2_09_PIN // SPI1_SCK + #define TOUCH_MISO_PIN EXP2_10_PIN // SPI1_MISO + #define TOUCH_MOSI_PIN EXP2_05_PIN // SPI1_MOSI - #define BTN_EN1 PE8 - #define BTN_EN2 PE11 - #define BEEPER_PIN PC5 - #define BTN_ENC PE13 + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN #define LCD_READ_ID 0xD3 #define LCD_USE_DMA_SPI @@ -325,22 +341,22 @@ #elif HAS_WIRED_LCD - #define BEEPER_PIN PC5 - #define BTN_ENC PE13 - #define LCD_PINS_ENABLE PD13 - #define LCD_PINS_RS PC6 - #define BTN_EN1 PE8 - #define BTN_EN2 PE11 + #define BEEPER_PIN EXP1_10_PIN + #define BTN_ENC EXP1_09_PIN + #define LCD_PINS_ENABLE EXP1_08_PIN + #define LCD_PINS_RS EXP1_07_PIN + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN #define LCD_BACKLIGHT_PIN -1 // MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor) #if ENABLED(MKS_MINI_12864) //#define LCD_BACKLIGHT_PIN -1 //#define LCD_RESET_PIN -1 - #define DOGLCD_A0 PD11 - #define DOGLCD_CS PE15 - //#define DOGLCD_SCK PA5 - //#define DOGLCD_MOSI PA7 + #define DOGLCD_A0 EXP1_04_PIN + #define DOGLCD_CS EXP1_05_PIN + //#define DOGLCD_SCK EXP2_09_PIN + //#define DOGLCD_MOSI EXP2_05_PIN // Required for MKS_MINI_12864 with this board //#define MKS_LCD12864B @@ -348,15 +364,15 @@ #else // !MKS_MINI_12864 - #define LCD_PINS_D4 PE14 + #define LCD_PINS_D4 EXP1_06_PIN #if ENABLED(ULTIPANEL) - #define LCD_PINS_D5 PE15 - #define LCD_PINS_D6 PD11 - #define LCD_PINS_D7 PD10 + #define LCD_PINS_D5 EXP1_05_PIN + #define LCD_PINS_D6 EXP1_04_PIN + #define LCD_PINS_D7 EXP1_03_PIN #endif - #define BOARD_ST7920_DELAY_1 DELAY_NS(96) - #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #define BOARD_ST7920_DELAY_1 DELAY_NS( 96) + #define BOARD_ST7920_DELAY_2 DELAY_NS( 48) #define BOARD_ST7920_DELAY_3 DELAY_NS(600) #endif // !MKS_MINI_12864