Replies: 6 comments 9 replies
-
If you need support or feel that this is a bug please open an issue and provice correct log format. |
Beta Was this translation helpful? Give feedback.
-
Hi, Seems like i have the same issue or similar |
Beta Was this translation helpful? Give feedback.
-
I'm also still suffering this Problem... What I've tried so far: Is there a way to easily "sniff" the RS485 Traffic? |
Beta Was this translation helpful? Give feedback.
-
Hmm, seems ok, at least after last reboot?
It seems if I'm connecting the RS485 directly to Raspberry it becomes stable. Was watching it several minutes, no failure. As soon as i connect Hub inbetween it fails every few seconds. Tried second Hub same story. |
Beta Was this translation helpful? Give feedback.
-
/data/log/messages also look strange:
` |
Beta Was this translation helpful? Give feedback.
-
OK, Problem solved! It seems like a "good" Hub is really important. I was ordering now 3 Hubs in total from Amazon. Latest one is from Anker, which now works instantly absolutly fine! Thanks for support! |
Beta Was this translation helpful? Give feedback.
-
Hi,
Somehow I've unstable communication with 2 JKBMS Battery setup.
Sometimes it works for around a minute, then suddenly both loose connection.
After a few seconds both start again working ... for some seconds, then again both loose connection.
I'm using original Victron RS-485 Adapter and tried connecting with and without GND connection.
Tried to change RS485 Converter of JKBMS, tried to change the Victron Adapter ... but it stays always similar.
Tried to change Poll Intervall to 1500msec.
Logfile just shows: ERROR: No reply.
Beta Was this translation helpful? Give feedback.
All reactions