From 228ce08533e05b5843faefeb3410cf43d22f4cb7 Mon Sep 17 00:00:00 2001 From: Franck Nijhof Date: Sat, 22 Jun 2024 19:44:37 +0200 Subject: [PATCH] Tiny tweaks --- source/_integrations/motionblinds_ble.markdown | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/source/_integrations/motionblinds_ble.markdown b/source/_integrations/motionblinds_ble.markdown index 8ba47ad79bf5..ecc7d68c10d6 100644 --- a/source/_integrations/motionblinds_ble.markdown +++ b/source/_integrations/motionblinds_ble.markdown @@ -48,8 +48,8 @@ The following entities are available for a Motionblinds Bluetooth device: - [Select](https://www.home-assistant.io/integrations/select/) entities: - Speed select: allows you to change the speed of the motor to low, medium, or high. Available for all blinds except curtain blinds and vertical blinds. - [Sensor](https://www.home-assistant.io/integrations/sensor/) entities: - - Battery sensor: shows the battery percentage. The icon also reflects whether the motor is currently charging and/or whether the motor is wired and therefore does not have a battery. - - Calibration sensor: shows whether or not the blind is still calibrated. The motor can move to an uncalibrated state when the motor has been moved to a different position while not powered. Available for a curtain blind and vertical blind as these can be moved while not powered. + - Battery sensor: shows the battery percentage. The icon also reflects whether the motor is currently charging and/or whether the motor is wired and, therefore, does not have a battery. + Calibration sensor: shows whether or not the blind is still calibrated. The motor can move to an uncalibrated state when it has been moved to a different position while not powered. This sensor is available for curtain blinds and vertical blinds, as these can be moved while not powered. - Connection sensor: shows whether the blind is connected, disconnected, connecting, or disconnecting. - Signal strength sensor: shows the signal strength in dBm.