Skip to content

Latest commit

 

History

History
45 lines (36 loc) · 2.38 KB

settings.md

File metadata and controls

45 lines (36 loc) · 2.38 KB

Requirements and Settings

Requirements

  • Only devices running the Android TV Remote Service are supported.
    • ‼️ This service does not work on Fire TV devices.
  • Only devices in the same network can be discovered.
  • The mDNS protocol must be allowed in your network.
    • In most consumer networks the mDNS protocol is allowed and when the Remote and the Android TV device(s) are on the same network, the Remote should have no difficulties finding the device(s).
    • When using mesh networking or professional networking gear, mDNS may be disabled or only specific mDNS services may be allowed.
      In such cases, please check the manufacturer's documentation on how to enable mDNS or specific mDNS services.

Limitations and Known Issues

  • During the setup process, you have to enter a PIN code that is shown on your Android TV.
    • Please make sure that your Android TV is powered on and that no old pairing request is shown.
    • If pairing continuously fails, reboot your Android TV device and try again.
    • If sending commands doesn't work after pairing or the integration is repeatedly disconnected, try rebooting the Android TV device.
  • Verify with the Google TV mobile app or the Google Home mobile app to send commands to the Android TV device.
    • If these don't work, neither will this integration.
  • Not every app will work or supports all keycodes.
    • For example, some IP-TV apps don't support channel-up & down commands.
  • Some devices, like TCL, become unavailable after they are turned off, unless you activate the Screenless service.
    • Activate it under: Settings, System, Power and energy: Screenless service

See also the known issues of Home Assistant's Android TV Remote Integration, since it is using the same communication library.

Application Settings

Kodi

If navigation doesn't work within the Kodi app, an additional input controller needs to be configured first with the original Android TV remote:

  1. Start Kodi
  2. Go to Settings, System, Input: Configure attached controllers
  3. Select Get more...
  4. Scroll down and select TV Remote
  5. Configure buttons: select a button in the list with the original remote, then confirm it with the corresponding Remote Two button.