5.8.2 some hub/doorbell entities unavailable (OK on 5.8.1)

[RedNo7]

Description

After updating to 5.8.2, the following entities became unavailable (all hub related).

select.doorbell_timezone,
select.tapo_doorbell_motion_detection,
select.tapo_doorbell_person_detection,
select.tapo_doorbell_vehicle_detection,
sensor.tapo_doorbell_disk_1_status
sensor.hub_disk_1_status,
select.hub_timezone,

• The problem survives a restart of both the hub and HA.
• Downgrading to 5.8.1 resolved the issue.
• Upgrading back to 5.8.2, and only 3 of the doorbell select.xxx were still unavailable (the hub itself was fine).

select.tapo_doorbell_motion_detection,
select.tapo_doorbell_person_detection,
select.tapo_doorbell_vehicle_detection,

• Downgrading to 5.8.1 resolved the issue again.
• Upgrading back to 5.8.2, and the same 3 doorbell selects remained unavailable (hub still OK).

select.tapo_doorbell_motion_detection,
select.tapo_doorbell_person_detection,
select.tapo_doorbell_vehicle_detection,

Reproduction Steps

upgrade to 5.8.2

Expected behavior

I expect all (enabled) entities to be available (except buttons which are always 'unavailabe').

If applicable, add error logs.

No response

Device Firmware

1.1.16 Build 20240617 rel.65780

Integration Version

5.8.2

Using stream component

Yes

Does camera work via official integrations?

Yes

Camera has all attributes filled out in developer tools

Yes

HASS Environment

Docker on RPi

Search for similar issues

Yes

Additional information

Note the hub and camera are fine for several sensors (i.e. it is working).

I have a bunch of doorbell entities disabled so not sure whether they would also have been problem. I am happy to re-enable if it helps diagnose the issue.

my dashboard with 5.8.1

my dashboard with 5.8.2

[JurajNyiri]

Please add error logs. If there are no error logs enable debug and add debug logs.

[RedNo7]

Sorry, here you go.

home-assistant.log

[JurajNyiri]

In order to fix this I will need debug logs as well. Please enable them and post full log here.

[JurajNyiri]

When you will be posting debug logs, please post both from 5.8.1 and 5.8.2

[RedNo7]

I'm in the UK (was asleep) so only just got your email.

Sorry about the previous logs - I read your request to mean you wanted debug logs only if there were no error in the logs (and I thought there were).

I got you reply by email this morning, did the work but can now see there was a 2nd message (that I didn't get by email overnight) and so will post the 5.8.3 logs now and downgrade back to 5.8.1 to get those logs in a few mins.

5.8.3 logs:
home-assistant.log

edit: 5.8.1 logs:
home-assistant.log

[JurajNyiri]

Fixed in https://github.com/JurajNyiri/HomeAssistant-Tapo-Control/releases/tag/5.8.4.

[RedNo7]

awesome - thanks for the quick turnaround!