Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Downgrading Process of TAPO Cams #623

Closed
RestOp opened this issue Jul 14, 2024 · 9 comments
Closed

Downgrading Process of TAPO Cams #623

RestOp opened this issue Jul 14, 2024 · 9 comments

Comments

@RestOp
Copy link

RestOp commented Jul 14, 2024

Description

Hi to all downgraders,

I have just combined all the infos to one post to make it easier for newbies.

Firts of all - very good news first of all!!!

I have just downgraded all my 3 different Tapo Cams: C100 V1, C200 V1 and C210 V1
It is very easy, took about 15 mins for all of 3 cams...

Here are the working firmware for this cams:
C100 v1: /Tapo_C100v1_en_1.3.6_Build_230512_Rel.47642n_up_boot-signed_1689123454635.bin
C200 v1: /Tapo_C200v1_en_1.3.6_Build_230424_Rel.77225n_up_boot-signed_1682511249340.bin
C210 v1: /Tapo_C210v1_en_1.3.7_Build_230823_Rel.55528n_up_boot-signed_1697005413481.bin

To download one just put the at the start of link - https://download.tplinkcloud.com/firmware

For all other cams you can find the firmware here https://github.com/tapo-firmware/Directory/blob/main/all_keys.txt

Instruction of formatting of SD Card is here https://github.com/DrmnSamoLiu/Downgrading-Tapo-Cams/tree/main?tab=readme-ov-file#solution

Here is the list of commands, you can just copy paste them:

  • list disk

  • select disk 6

  • clean

  • convert gpt

  • create partition primary

  • format quick FS=FAT32

A litle bit more infos to understand downgrade process is here nervous-inhuman/tplink-tapo-c200-re#4 (comment)

As for me i noticed the following steps of flashing

  1. About 15 sec after the power on - red light blinks
  2. About 50 sec after the power on - green light blinks
  3. Then led lights green - It seems to be the downgrade process is fiunished, but i have waited 3 minutes as suggested in manual.

Then restart cam without SD Card, delete firmware from SD Card on PC and put SD Card in cam.
Great that the cam authorisation and all the settings in APP remain, you have just to initialise SD Card in APP again and thats all!

Good Luck!

Reproduction Steps

See above

Expected behavior

See above

If applicable, add error logs.

See above

Device Firmware

1.1.1.1.1

Integration Version

5.01

Using stream component

Yes

Does camera work via official integrations?

Yes

Camera has all attributes filled out in developer tools

Yes

HASS Environment

Hass

Search for similar issues

Yes

Additional information

No response

@krasatos
Copy link

Thank you for this!
I have a bunch of C320ws.
Has anyone gone through the process on Tapo C320ws and can confirm it went smoothly?
Which firmware should I go for?

@andyjduncan
Copy link

I've commented on the other downgrade thread, but I'll add this here:

I found I couldn't downgrade my C210 v2 devices directly to firmware 1.3.7, but it did work downgrading to 1.3.8 first.

@bellario89
Copy link

Does anyone know the firmware I should use for TC73? It's the HomeKit PTZ one, I couldn't figure it out from the list.

@TeDeVPrime
Copy link

i am guessing that we haven't heard any news from TP-Link about this issue yet eh?

@JurajNyiri
Copy link
Owner

The last update is always inside #551 (comment). I just posted a new update today.

@RestOp I have enabled discussions for this repository. Could you please move this in there? https://github.com/JurajNyiri/HomeAssistant-Tapo-Control/discussions Once done, I will link it in the issue above.

@JurajNyiri
Copy link
Owner

Thank you @RestOp linked this in issue and readme as well, once you move into discussion I will change the link.

@RestOp
Copy link
Author

RestOp commented Jul 16, 2024

The last update is always inside #551 (comment). I just posted a new update today.

@RestOp I have enabled discussions for this repository. Could you please move this in there? https://github.com/JurajNyiri/HomeAssistant-Tapo-Control/discussions Once done, I will link it in the issue above.

Done #625

@JurajNyiri
Copy link
Owner

TY, updated all.

@mitchelltornquist
Copy link

Has anyone here had success downgrading a C200v3? Seen lots of posts about success on v1 and v2, but can't find much info on v3. Have been trying to downgrade mine with no success.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

7 participants