diff --git a/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/ARZJ.txt b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/ARZJ.txt new file mode 100644 index 0000000..c5194f3 --- /dev/null +++ b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/ARZJ.txt @@ -0,0 +1,98 @@ +smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-4-pve] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar DC HC530 +Device Model: WDC WUH721414ALE6L4 +Serial Number: 9MG6ARZJ +LU WWN Device Id: 5 000cca 290c2e28c +Firmware Version: LDGNW400 +User Capacity: 14,000,519,643,136 bytes [14.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 5 10:14:44 2024 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1512) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96 + 3 Spin_Up_Time 0x0007 089 089 001 Pre-fail Always - 77 (Average 386) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 6 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2645 + 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 + 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 110 +193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 110 +194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 23 (Min/Max 19/48) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2629 - +# 2 Extended offline Completed without error 00% 310 - +# 3 Extended offline Completed without error 00% 174 - +# 4 Short offline Completed without error 00% 2 - +# 5 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. \ No newline at end of file diff --git a/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/BWLU.txt b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/BWLU.txt new file mode 100644 index 0000000..b45786b --- /dev/null +++ b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/BWLU.txt @@ -0,0 +1,96 @@ +smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-4-pve] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WUH721414ALN604 +Serial Number: 9MH2BWLU +LU WWN Device Id: 5 000cca 290cf2ce1 +Firmware Version: LDGNW400 +User Capacity: 14,000,519,643,136 bytes [14.0 TB] +Sector Size: 4096 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 5 10:14:01 2024 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1562) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 136 136 054 Pre-fail Offline - 96 + 3 Spin_Up_Time 0x0007 091 091 001 Pre-fail Always - 0 (Average 383) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 5 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2643 + 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 + 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 109 +193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 109 +194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 23 (Min/Max 20/36) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2628 - +# 2 Extended offline Completed without error 00% 309 - +# 3 Extended offline Completed without error 00% 176 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. \ No newline at end of file diff --git a/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/EPXL.txt b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/EPXL.txt new file mode 100644 index 0000000..062d26f --- /dev/null +++ b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/EPXL.txt @@ -0,0 +1,72 @@ +smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-4-pve] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Device Model: WDC WUH721414ALN604 +Serial Number: X1G4EPXL +LU WWN Device Id: 5 000cca 298c204f0 +Firmware Version: LDGNW400 +User Capacity: 14,000,519,643,136 bytes [14.0 TB] +Sector Size: 4096 bytes logical/physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: Not in smartctl database 7.3/5319 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 5 10:11:35 2024 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92 + 3 Spin_Up_Time 0x0007 091 091 001 Pre-fail Always - 0 (Average 393) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 5 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2643 + 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5 + 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 110 +193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 110 +194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 21 (Min/Max 18/37) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2626 - +# 2 Extended offline Completed without error 00% 307 - +# 3 Extended offline Completed without error 00% 177 - +# 4 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. \ No newline at end of file diff --git a/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/HXDM.txt b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/HXDM.txt new file mode 100644 index 0000000..612ba5b --- /dev/null +++ b/hardware/moose/hdd-smart-reports/2024-11-pool-degraded/HXDM.txt @@ -0,0 +1,98 @@ +smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.8.12-4-pve] (local build) +Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org + +=== START OF INFORMATION SECTION === +Model Family: Western Digital Ultrastar DC HC530 +Device Model: WDC WUH721414ALE6L4 +Serial Number: XJG0HXDM +LU WWN Device Id: 5 000cca 29ac03bbf +Firmware Version: LDGNW400 +User Capacity: 14,000,519,643,136 bytes [14.0 TB] +Sector Sizes: 512 bytes logical, 4096 bytes physical +Rotation Rate: 7200 rpm +Form Factor: 3.5 inches +Device is: In smartctl database 7.3/5319 +ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4 +SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) +Local Time is: Thu Dec 5 10:15:18 2024 EST +SMART support is: Available - device has SMART capability. +SMART support is: Enabled + +=== START OF READ SMART DATA SECTION === +SMART overall-health self-assessment test result: PASSED + +General SMART Values: +Offline data collection status: (0x82) Offline data collection activity + was completed without error. + Auto Offline Data Collection: Enabled. +Self-test execution status: ( 0) The previous self-test routine completed + without error or no self-test has ever + been run. +Total time to complete Offline +data collection: ( 101) seconds. +Offline data collection +capabilities: (0x5b) SMART execute Offline immediate. + Auto Offline data collection on/off support. + Suspend Offline collection upon new + command. + Offline surface scan supported. + Self-test supported. + No Conveyance Self-test supported. + Selective Self-test supported. +SMART capabilities: (0x0003) Saves SMART data before entering + power-saving mode. + Supports SMART auto save timer. +Error logging capability: (0x01) Error logging supported. + General Purpose Logging supported. +Short self-test routine +recommended polling time: ( 2) minutes. +Extended self-test routine +recommended polling time: (1342) minutes. +SCT capabilities: (0x003d) SCT Status supported. + SCT Error Recovery Control supported. + SCT Feature Control supported. + SCT Data Table supported. + +SMART Attributes Data Structure revision number: 16 +Vendor Specific SMART Attributes with Thresholds: +ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE + 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 2 Throughput_Performance 0x0005 137 137 054 Pre-fail Offline - 92 + 3 Spin_Up_Time 0x0007 089 089 001 Pre-fail Always - 76 (Average 384) + 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 6 + 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 + 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 + 8 Seek_Time_Performance 0x0005 128 128 020 Pre-fail Offline - 18 + 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 2645 + 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0 + 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 + 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 +192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 110 +193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 110 +194 Temperature_Celsius 0x0002 100 100 000 Old_age Always - 22 (Min/Max 19/49) +196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 +197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 +198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 +199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0 + +SMART Error Log Version: 1 +No Errors Logged + +SMART Self-test log structure revision number 1 +Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error +# 1 Extended offline Completed without error 00% 2627 - +# 2 Extended offline Completed without error 00% 308 - +# 3 Extended offline Completed without error 00% 174 - +# 4 Short offline Completed without error 00% 2 - +# 5 Short offline Completed without error 00% 0 - + +SMART Selective self-test log data structure revision number 1 + SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS + 1 0 0 Not_testing + 2 0 0 Not_testing + 3 0 0 Not_testing + 4 0 0 Not_testing + 5 0 0 Not_testing +Selective self-test flags (0x0): + After scanning selected spans, do NOT read-scan remainder of disk. +If Selective self-test is pending on power-up, resume after 0 minute delay. \ No newline at end of file