Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog, and this project adheres to Semantic Versioning.

LoRaWAN pre-certification results

Please refer to Releases pre-certification-results document for further information.

[Unreleased]

[4.6.0] - 2022-01-11

General

Release based on "LoRaWAN specification 1.0.4" and "LoRaWAN specification 1.1.0 + FCntDwn ERRATA" with "LoRaWAN Regional Parameters 2-1.0.1"
GitHub reported issues corrections.

Known limitations

SAMR34 platform does not implement NVM storage functionality. This is a requirement for LoRaWAN versions greater or equal to 1.0.4. No work on this subject is forseen by the maintainers. Implementation proposals are welcome.

Added

Added NbTrans default value reset under JoinAccept processing
Added missing Class B certification commands
Added missing classBParams.NetworkActivation variable initialization
Added Class B remote multicast setup support
Added data rate validation to the join accept message handling
Added channel id limits verification to DlChannelReq handling

Changed

Changed LmHandlerDeviceTimeReq API to be publicly accessible
Changed improved the way USE_LRWAN_1_1_X_CRYPTO pre-processing directive is used
Changed improved the way JoinNonce is checked

Fixed

Fixed first beacon acquisition after receiving a DeviceTimeAns.
Fixed LmHandlerParams_t PingSlotPeriodicity field type from bool to uint8_t
Fixed i2c.h to include "utilities.h".
Fixed VSCode periodic-uplink-lpp project default LoRaWAN class selection
Fixed SX127x FSK transmission when radio current operating mode is RX.

Removed

Removed no more needed MLME_SCHEDULE_UPLINK notification

[4.5.2] - 2021-05-28

General

Release based on "LoRaWAN specification 1.0.4" and "LoRaWAN Regional Parameters 2-1.0.1"
GitHub reported issues corrections.

Known limitations

SAMR34 platform does not implement NVM storage functionality. This is a requirement for LoRaWAN versions greater or equal to 1.0.4. No work on this subject is forseen by the maintainers. Implementation proposals are welcome.

Added

Added possibility to override periodic-uplink-lpp example LORAWAN_DEFAULT_CLASS
Added I2C driver support for B-L072Z-LRWAN1 and Nucleo platforms to the build system
Added battery voltage and MCU temperature reading functions implementation for Nucleo platforms
Added a default value for Request->ReqReturn.DutyCycleWaitTime to ensure that a valid value is always returned
Added SX126x REG_RX_GAIN and REG_TX_MODULATION to the radio registers retention list
Added SX126x missing registers definitions
Added radio image calibration enforcement after radio initialization and radio sleep cold start.
Added possibility to query minimal Tx data rate

Changed

Updated ADC driver based on en.en-st-stm32cubeide examples
Changed improved the way LmHandler handles the packages transmissions
Changed certification OnTxPeriodicityChanged callback implementation in order to directly apply the requested change
Changed the LmHandler initialization to apply user default data rate
Changed SX1272 and SX1276 FSK FIFO threshold from 15 to 31 in order to give more time for the MCU to make other processing tasks
Changed the way IrqFired global variable is handled by RadioIrqProcess
Changed the place of call to TimerStop( &RxTimeoutTimer ) on RadioIrqProcess implementation
Changed utilities.h SUCCESS/FAIL definition by an enumeration LMN_STATUS_OK/LMN_STATUS_ERROR

Fixed

Fixed Null pointer exception when CN470 region was selected
Fixed src/system/gps.c HasFix variable type from double to bool
Fixed Class C downlink handling
Fixed I2C driver for L476
Fixed re-transmissions handling when ClassB or ClassC downlink is received
Fixed certification FPort224DisableReq command NVM handling
Fixed Class B & C confirmed downlink acknowledge management when CLASS_B_C_RESP_TIMEOUT expires
Fixed an issue when receiving downlinks in class C window during a class A procedure
Fixed SX126x and LR1110 driver IrqFired variable management
Fixed LmhpCompliance.c periodicity array size computation
Fixed join back-off by not storing band usage on the NVM memory.
Fixed LoRaMacMibGetRequestConfirm MIB_SE_PIN handling
Fixed ping-slot frequency to take in account the AS923_FREQ_OFFSET_HZ parameter
Fixed fragmentation loop variable type in order to allow more than 255 fragments
Fixed RtcMs2Tick conversion on SAMR34
Fixed compiling issue when RU864 region is selected
Fixed MLME_SCHEDULE_UPLINK handling.

Removed

Removed STM32 platforms system wake up time calibration

[4.5.1] - 2021-01-18

General

Release based on "LoRaWAN specification 1.0.4" and "LoRaWAN Regional Parameters 2-1.0.1"
GitHub reported issues corrections.

Fixed

Fixed compiling issues

[4.4.7] - 2021-01-18

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
Release 4.4.7 is an hotfix of 4.4.6 and is the last one supporting "LoRaWAN specification 1.0.3"

Changed

Changed examples GitHub version to 4.4.7

Fixed

Fixed compiling issues when KR920 or RU864 regions are selected
Fixed compiling issues for fuota-test-01 example

[4.5.0] - 2020-12-18

General

Release based on "LoRaWAN specification 1.0.4" and "LoRaWAN Regional Parameters 2-1.0.1"
GitHub reported issues corrections. Please refer to Release Version 4.5.0

Added

Added implementation of LoRaWAN 1.0.4 changes
Added implementation for new Certification protocol specification
Added GitHub repository and firmware examples version definitions

[4.4.6] - 2020-12-18

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
GitHub reported issues corrections. Please refer to Release Version 4.4.6
Release 4.4.6 is the last one supporting "LoRaWAN specification 1.0.3"

Changed

Refactored MAC layer and examples Non Volatile Memory data handling
Changed NewChannelReq amd DlChannelReq handling to ignore command for AU915, CN470 and US915 regions
Updated behavior of SX126xSetLoRaSymbNumTimeout to round up the timeout to the nearest possible number of symbol.
Changed radio drivers floating point to integer computations
Improved GetNextLowerTxDr function implementation.
Changed SX1272 and SX1276 FSK FIFO handling by using FifoLevel IRQ instead of FifoEmpty IRQ
WARNING DIO1 IRQ MCU pin detection has changed from RISING to RISING_FALLING edge.
Changed IMST boards default power source to USB_POWER

Fixed

Fixed certification test application handling
Fixed ping-pong and rx-sensi examples to use the right FSK_BANDWIDTH and FSK_AFC_BANDWIDTH parameters
Fixed one byte transmissions over I2C
Fixed RegionIN865RxParamSetupReq DrOffset verification
Fixed STM platforms IRQ handlers when using a C++ compiler
Fixed an issue where the Join back off algorithm wasn't being applied when the duty-cycle enforcement was OFF
Fixed AU915_MAX_RX1_DR_OFFSET value to 5 instead of 6

Removed

Removed ClassA, ClassB and ClassC examples.

[4.5.0-rc.1] - 2020-11-24

General

Release based on "LoRaWAN specification 1.0.4" and "LoRaWAN Regional Parameters 2-1.0.1"
GitHub reported issues corrections. Please refer to Release Version 4.5.0

Added

Added implementation of LoRaWAN 1.0.4 changes
Added implementation for new Certification protocol specification
Added GitHub repository and firmware examples version definitions

Changed

Changed IMST boards default power source to USB_POWER

Fixed

Fixed an issue where the Join back off algorithm wasn't being applied when the duty-cycle enforcement was OFF.
Fixed AU915_MAX_RX1_DR_OFFSET value to 5 instead of 6

Removed

Removed NvmCtxCallback calls as they should only be done when a modification happens.
Removed ClassA, ClassB and ClassC examples.

[4.4.5] - 2020-10-14

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
GitHub reported issues corrections. Please refer to Release Version 4.4.5

Added

Added to FRAGMENTATION_FRAG_SESSION_SETUP_REQ checks which verify FragNb and FragSize validity.
Added missing call to SX126xSetOperatingMode on SX126xSetTxContinuousWave and SX126xSetTxInfinitePreamble functions
Added new specific board API to initialize the RF switch (SX126xIoRfSwitchInit)
Add to AS923 and KR920 regions a definition for the Rx bandwidth to be used while executing the LBT algorithm
Added support for other AS923 channel sub plan groups.
Added FPort filtering to loramac handler packages.
Added missing NVM update notifications

Changed

Refactored function RegionXXInitDefaults. Fixes an issue on US based bands where the channels mask was not being reset.
Changed hard coded JoinAccept max payload size (33) by LORAMAC_JOIN_ACCEPT_FRAME_MAX_SIZE definition.
Moved radio operating mode management to specific board implementation
Changed radio IsChannelFree API in order to provide reception bandwidth
AS923 default downlink dwell time setting changed to disabled
Back port 1.0.4 region implementation improvements
Changed RegionCommonComputeSymbolTimeLoRa, RegionCommonComputeSymbolTimeFsk and RegionCommonComputeRxWindowParameters API implementations to use integer divisions instead of double division.
Changed DeriveSessionKey10x and DeriveSessionKey11x functions API (Removed pointer based variable usage)

Fixed

Fixed SX126xSetLoRaSymbNumTimeout to call the workaround only if the number of symbols is equal to or higher than 64.
Fixed IAR C++ compiler warnings
Fixed missing { after extern "C" in cmac.h file
Fixed FragSessionStatusAns message construction for Received&index field
Fixed LoRaMacCryptoHandleJoinAccept function DevNonce, RJCount0 and RJCount1 handling.
Fixed nonce variable declaration
Fixed LoRaMacCrypto.c conditional pre-processing.
Fixed missing Rx1Frequency reset for dynamic channel plans
Applied Japan ARIB restrictions to the AS923_1_JP sub plan
Applied Regional Parameters 1.0.3.revA ERRATA note concerning the ClassB beacon format
Fixed SAMR34 compiling issue when USE_RADIO_DEBUG directive is defined
Fixed SX126xClearIrqStatus call to only clear read flags
Fixed GFSK bandwidth handling for SX126x and LR1110 radios.
Fixed version handling for MC root keys derivation
Fixed Class B initialization.
Fixed duty-cycle implementation

[4.4.4] - 2020-05-26

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
GitHub reported issues corrections. Please refer to Release Version 4.4.4

Added

Added the possibility to setup multicast channels locally
Added new SecureElementProcessJoinAccept API to the secure-element.h
Added possibility to select the secure-element to be used as well as to select if it is pre-provisioned or not
Added support for LR1110 radio
Added support for LR1110 crypto-engine to be used as secure-element
Added support for ATECC608A-TNGLORA secure-element
Added LoRaMacDeInitialization API to ease dynamic region change
Added possibility to query implemented versions of the LoRaWAN MAC layer and Regional Parameters specifications
Added MOTE_MAC_TX_PARAM_SETUP_ANS as sticky MAC command
Added a filter to handle multicast downlinks exceptions
Added CHANGELOG.md file

Changed

Updated examples to use OTAA activation method by default
Updated LmhpFragmentation implementation
Updated Radio APIs to handle 32-bit register addresses
Changed SX126x driver to only process a received packet when there is no CRC error
Moved Commissioning.h files to a single one located under src/apps/LoRaMac/common directory
Updated Radio.TimeOnAir API in order to be independent of the current hardware settings
Moved keys definition and management to the secure-element implementation
Moved device identity to secure-element se-identity.h file
Changed support of SAML21 platform by SAMR34 platform
Changed the MlmeRequest and McpsRequest APIs to report back when the next transmission is possible
Changed ResetMacParameters to perform a complete re-initialization of the regional layer after processing the join accept
Updated the implementation to verify the MAC commands size
Changed the way the duty-cycle management is handled

Removed

Removed the LoRaWAN keys display on serial terminal
Removed GEN_APP_KEY support as it is equivalent to LoRaWAN 1.1.x APP_KEY
Removed tables definition for repeater support. LoRa-Alliance will provide details on these tables usage in future versions
Removed Changelog chapter from readme.md file

Fixed

Fixed SX126xGetRandom API implementation
Fixed SX126x driver missing call to RadioStandby in LoRa modem case inside RadioSetRxConfig API
Fixed SX126x driver LoRaSymbNumTimeout handling
Fixed soft-se/cmac for misaligned 32-bit access
Fixed ping-pong and rx-sensi projects for packets with sizes bigger than 64 bytes handling
Fixed missing switch case PHY_BEACON_CHANNEL_FREQ for AU915 region
Fixed default data rates for Class B beacon and ping-slots for AU915 region
Fixed join request limitation due to duty cycle restrictions
Fixed SRV_MAC_DEVICE_TIME_ANS, SRV_MAC_PING_SLOT_INFO_ANS and SRV_MAC_BEACON_TIMING_ANS processing to be executed only if corresponding MLME request is queued
Fixed issue where the stack could get stuck in MCPS busy state after MLME Device Time Request
Fixed duty-cycle enforcement by disabling it for IN865 region
Fixed potential issue where the FCntUp counter could sometimes be incremented by 2 instead of 1
Fixed wrong beacon time-on-air calculation

Security

Security breach found by Tencent Blade Team please refer to security advisory - CVE-2020-11068

[4.4.3] - 2019-12-17

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
GitHub reported issues corrections. Please refer to Release Version 4.4.3

[4.4.2] - 2019-07-19

General

Release based on "LoRaWAN specification 1.0.3" and "LoRaWAN Regional Parameters v1.0.3revA"
GitHub reported issues corrections. Please refer to Release Version 4.4.2

Added

Added new refactored application examples
Added LoRa-Alliance defined application layer protocols support. Only FUOTA test scenario 01 required features are currently implemented
- "Clock Synchronization" package
- "Fragmented data block transport" package
- "Remote multicast setup" package
Added a NVM context management module. (Disabled by default)
Added secure-element support
Added B-L072Z-LRWAN1 platform support
Added NucleoL476 platform support
Added NucleoL476 platform support
Added IMST new platforms
Added RU864 region support
Added ClassB support
Added a callback to notify the upper layer to call LoRaMacProcess function
Added support for RxC windows (ClassC) required by the application layer protocols

Changed

Examples application refactoring plus the addition of the application status display on the serial port. (921600-8-N-1)
Refactored timer.c/h, rtc-driver.c/h and added a systime.c/h module
Functions in ISR context have been moved to main context
Changed BoardDisableIrq and BoardEnableIrq functions by CRITICAL_SECTION_BEGIN and CRITICAL_SECTION_END respectively
Heavily refactored the LoRaMac.c and LoRaMac.h implementation
Changed multicast channels handling according to the application layer protocols

Removed

Removed SensorNode platform support
Removed MoteII platform support
Removed LoRaMote platform support
Removed US915-Hybrid region support

Fixed

Applied SX1272 and SX1276 radios errata note 3.1 to the radio drivers implementation
Fixed printf and scanf functions when GCC is used as compiler

[4.4.1] - 2018-03-07

General

Release based on "LoRaWAN specification 1.0.2" and "LoRaWAN Regional Parameters v1.0.2rB"
GitHub reported issues corrections. Please refer to Release Version 4.4.1

Added

Added SX126x radio support
Added NucleoL073 and NucleoL152 board platforms support
Added Microchip/Atmel SAML21 Xplained Pro hardware platform support
Added CMAKE build system support

Removed

Removed CoIDE projects support
Removed Keil projects support

[4.4.0] - 2017-09-08

General

Release based on "LoRaWAN specification 1.0.2" and "LoRaWAN Regional Parameters v1.0.2rB"
GitHub reported issues corrections

Added

Added SX126x radio support
Added NucleoL073 and NucleoL152 board platforms support
Added Microchip/Atmel SAML21 Xplained Pro hardware platform support
Added CMAKE build system support
Added the support for all "LoRaWAN Regional Parameters v1.0.2rB" document defined regions

Changed

Changed radio driver to perform the LBT carrier sense continuously for a given period of time
Changed implementation to support 1.0.2 specification additions

[4.3.2] - 2017-04-19

General

Release based on "LoRaWAN specification 1.0.2"
GitHub reported issues corrections

Added

Added an algorithm to automatically compute the Rx windows parameters. (Window symbolTimeout and Offset from downlink expected time)
Added a workaround to reset the radio in case a TxTimeout occurs
Added newly defined TxCw(Tx Continuous Wave) certification protocol command

Changed

Changed radio driver to perform the LBT carrier sense continuously for a given period of time
Changed implementation to support 1.0.2 specification additions
Changed FSK modem handling to use the provided symbolTimeout (1 symbol equals 1 byte) when in RxSingle mode
Changed GpioMcuInit function to first configure the output pin state before activating the pin
Changed the AdrAckCounter handling as expected by the test houses
Relocate parameter settings from ResetMacParameters to the initialization
Changed MAC layer indications handling

Removed

Removed useless LoRaMacPayload buffer

Fixed

Fixed an overflow issue that could happen with NmeaStringSize variable
Fixed an issue where the node stopped transmitting

[4.3.1] - 2017-02-27

General

Release based on "LoRaWAN specification 1.0.1"
GitHub reported issues corrections

Added

Added MoteII platform based on the IMST module iM881A (STM32L051C8)
Added NAMote72 platform
Added TxCw (Tx continuous wave) LoRaWAN compliance protocol command
Added TxContinuousWave support to the radio drivers
Added region CN470 support

Changed

Updated the MAC layer in order to be LoRaWAN version 1.0.1 compliant (Mainly US915 bug fixes)
Updated SensorNode projects according to the new MCU reference STM32L151CBU6. Bigger memories
Updated ST HAL drivers
- STM32L1xx_HAL-Driver : V1.2.0
- STM32L0xx_HAL_Driver : V1.7.0

Removed

Removed api-v3 support from the project

Fixed

Fixed compliance test protocol command 0x06 behavior
Fixed US band in order to pass the LoRaWAN certification

[4.3.0] - 2016-06-22

General

Release based on "LoRaWAN specification 1.0.1"
GitHub reported issues corrections

Added

Added radio RX_TIMEOUT irq clear into the irq handler
Added retransmission back-off
Added debug pin support to LoRaMote platform
Added a function to verify the RX frequency of window 2 for US band

Changed

Applied to all application files the certification protocol change for LoRaWAN 1.0.1 compliance tests
REMARK: api-v3 application files aren't updated
Update of the STM32L0 HAL to version 1.6.0
Consolidated the line endings across all project files Windows line endings has been choose for almost every file
Updated maximum payload size for US band
Update data rate offset table for US band
Make MAC commands sticky
Updated and improved MPL3115 device driver
RTC driver major update

Removed

Removed the end less loop from HAL_UART_ErrorCallback
Remove the TxPower limitation for US band on LoRaMacMibSetRequestConfirm function. The power will be limited anyway when the SendFrameOnChannel functions is called

Fixed

Issue(#81): Bug fix in function LoRaMacMlmeRequest case MLME_JOIN. Function will return LORAMAC_STATUS_BUSY in case the MAC is in status MAC_TX_DELAYED
Issue(#83): Bug fix in parameter validation
Issue(#84): Fix issue of CalibrateTimer function
Applied pull request #87
Issue(#88): Bug fix in function PrepareFrame where repeated MAC commands were not handled correctly
Fixed OnRadioRxDone Node now drops frames on port 0 with fOpts > 0
Fixed OnRadioRxDone Node now receives frames with fOpts > 0 when no payload is present

[4.2.0] - 2016-05-13

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Added

Added a definition for the LoRaWAN device address. Add an IEEE_OUI for the LoRaWAN device EUI
Added a definition for the default data rate
Introduce individual MIN and MAX datarates for RX and TX
Added the possibility to set and get the ChannelsDefaultDatarate
Introduce a new status MAC_RX_ABORT. Reset MAC_TX_RUNNING only in OnMacStateCheckTimerEvent

Changed

Update STM32L1xx_HAL_Driver version to 1.5. Update related drivers and implementations accordingly
REMARK: This change implies that the time base had to be changed from microseconds to milliseconds
Optimize radio drivers regarding FSK PER
Increase RTC tick frequency for higher resolution
Update the radio wake up time
Update channel mask handling for US915 hybrid mode to support any block in the channel mask
Optimization of the RX symbol timeout
Replace definition LORAMAC_DEFAULT_DATARATE by ChannelsDefaultDatarate in LoRaMacChannelAdd
Accept MAC information of duplicated, confirmed downlinks

Fixed

Fixed the frequency check condition for // ERRATA 2.1 - Sensitivity Optimization with a 500 kHz Bandwidth
Fixed an issue when calling SX127xInit function more than once
Issue(#66) correction of functions SX1276SetOpMode and SX1272SetOpMode
Issue(#68): Fix for low level RF switch control
Issue(#56) correction
Issue(#63) correct the maximum payload length in RX mode
Fixed Tx power setting loss for repeated join requests on US band
Issue(#59): Add the possibility to set the uplink and downlink counter
Issue(#72): Fix of possible array overrun in LoRaMacChannelRemove
Issue(#74): Drop frames with a downlink counter difference greater or equal to MAX_FCNT_GAP

[4.1.0] - 2016-03-10

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections
This version has passed all mandatory LoRa-Alliance compliance tests
One of the optional tests is unsuccessful (FSK downlinks PER on Rx1 and Rx2 windows) and is currently under investigation

Added

Add missing documentation about MIB_REPEATER_SUPPORT. (Issue #42)
Add a new LoRaMacState to allow adding channels during TX procedure. (Issue #43)
Add a new function PrepareRxDoneAbort to prepare a break-out of OnRadioRxDone in case of an error

Changed

Application state machine. Relocate setting sleep state and update the duty cycle in compliance test mode
Changed TimerHwDelayMs function to be re-entrant
Rename attribute nbRetries to NbTrials in structure McpsReqConfirmed_t. (Issue #37)
Updated implementation of SetNextChannel. Added enabling default channels in case of join request. (Issue #39)
Relocate the activation of LoRaMacFlags.Bits.McpsInd in OnRadioRxDone
Reset status of NodeAckRequested if we received an ACK or in case of timeout
Improved and corrected AdrNextDr function

Removed

Removed support for Raisonance Ride7 IDE (Reduces the amount of work to be done at each new release)
Removed the Bleeper-72 and Bleeper-76 platforms support as these are now deprecated
Removed additional EU868 channels from the LoRaWAN implementation files. GitHub (Issue #49)
The creation of these additional channels has been moved to the application example

Fixed

Fixed TimerIrqHandler. Now, it is possible to insert timers in callback
Fixed FSK modem packets bigger than 64 bytes handling (Issue #36)
Fixed default channels activation in case all others are disabled. (Issue #39)
Fixed default channel setting in case none is enabled
Fixed SRV_MAC_NEW_CHANNEL_REQ MAC command by adding a fix to the macIndex variable on US915 band
Start the MacStateCheckTimer in OnRxDone and related error cases with a short interval to handle events promptly. (Issue #44)

[4.0.0] - 2015-12-18

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Added

LoRaWAN certification protocol implementation

Changed

STACKFORCE new API integration
Reverse the EUIs arrays in the MAC layer

[3.4.1] - 2015-11-06

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Fixed

Fixed downlink counter roll over management when several downlinks were missed
Fixed the Radio maximum payload length management. Radio was filtering received frames with a length bigger than the transmitted one
Applied Pull request #22 solution proposition

[3.4.0] - 2015-10-30

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Added

Added TimerStop function calls to each timer event callback
Added some missing variables casts. Helps on code portability
Added const variable attribute when necessary to functions prototypes
Added LORAMAC_MIN_RX1_DR_OFFSET and LORAMAC_MAX_RX1_DR_OFFSET definitions to LoRaMac-board.h. Can be different upon used PHY layer
Added the limitation of output power according to the number of enabled channels for US915 band
Added the limitation of the applicative payload length according to the data rate. Does not yet take in account the MAC commands buffer. (Issue #15)

Changed

Changed all applications in order to have preprocessing definitions on top of the files and added relevant comments
Applications LED control is no more done into the timer callback functions but instead on the main while loop
Changed types names for stdint.h names. Helps on code portability
Renamed rand and srand to rand1 and srand1. Helps on code portability
Moved ID1, ID2 and ID3 definition from board.h to board.c, usb-cdc-board.c and usb-dfu-board.c
Renamed BoardMeasureBatterieLevel to BoardGetBatteryLevel
Added SetMaxPayloadLength API function to SX1272 and SX1276 radio drivers
Changed the name of Radio API Status function to GetStatus
Changed AES/CMAC types names for stdint.h names. Helps on code portability (Issue #20)
Moved __ffs function from utilities.h to spi-board.c. This function is only used there
Added support for the US915 band (Normal mode and hybrid mode. Hybrid mode is a temporary configuration up until servers support it automatically) (Issue #16)
Replaced the usage of __IO attribute by volatile
Renamed LoRaMacEvent_t into LoRaMacCallbacks_t and added a function pointer for getting battery level status
Renamed LoRaMacSetDutyCycleOn into LoRaMacSetTestDutyCycleOn
Renamed LoRaMacSetMicTest into LoRaMacTestSetMic
Increased the PHY buffer size to 250
LoRaMacEventInfo.TxDatarate now returns LoRaWAN data rate (DR0 -> DR7) instead of (SF12 -> DF7)
LoRaMac-board.h now implements the settings for the PHY layers specified by LoRaWAN 1.0 specification. (EU433, CN780, EU868, US915) (Issue #19)

Removed

Removed NULL definition from board.h
Removed the definition of RAND_SEED. It has been replaced by a function named BoardGetRandomSeed
Removed fputc function redefinition from Utilities.c
Removed the usage of PACKED attribute for data structures
Removed IsChannelFree check on LoRaMacSetNextChannel function. LoRaWAN is an ALHOA protocol. (Pull request #8)

Fixed

Fixed timings comments. Timing values are most of the time us based
Fixed and simplified the downlink sequence counter management
Fixed channel mask management for EU868 band
Fixed LoRaMacPrepareFrame function behavior when no applicative payload is present
Fixed MacCommandBufferIndex management. (Issue #18)

[3.3.0] - 2015-08-07

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Added

Added the support for LoRaWAN Class C devices
Added the possibility to change the channel mask and number of repetitions trough SRV_MAC_LINK_ADR_REQ command when ADR is disabled

Changed

Increased FSK SyncWord timeout value in order to listen for longer time if a down link is available or not. Makes FSK downlink more reliable
Increased the UART USB FIFO buffer size in order to handle bigger chunks of data
Renamed data rates as per LoRaWAN specification
Changed confirmed messages function to use default datarate when ADR control is off
After a Join accept the node falls back to the default datarate. Enables the user to Join a network using a different datarate from its own default one
Moved the MAC commands processing to the right places. FOpts field before the Payload and Port 0 just after the decryption. (Pull request #9)

Fixed

Implemented the radios errata note workarounds. SX1276 errata 2.3 "Receiver Spurious Reception of a LoRa Signal" is not yet implemented
Fixed handling of the MAC commands which was done incorrectly the condition to verify the length of the buffer has changed from < to <=
Fixed Rx1DrOffset management. In previous version DR1 was missing for all offsets
Fixed default FSK channel frequency
Fixed a firmware freeze when one of the following situations arrived in OnRxDone callback: bad address, bad MIC, bad frame. (Pull request #10)
Fixed weird conditions to check data rate on MAC command SRV_MAC_NEW_CHANNEL_REQ (Pull request #7)
Fixed join accept message handling to be ignored if already joined (Pull request #6)
Fixed channel index verification should use OR on SRV_MAC_NEW_CHANNEL_REQ command (Pull request #5)
Fixed the CFList management on JoinAccept. The for loop indexes were wrong. (Pull request #4)
Fixed AES key size (Pull request #3)

[3.2.0] - 2015-04-30

General

Release based on "LoRaWAN specification 1.0.0"
GitHub reported issues corrections

Added

Added the support of packed structures when using IAR tool chain
Added a function to get the time in us
Added a typedef for time variables (TimerTime_t)
Added a function that returns if the GPS has a fix or not
Added missing MAC commands and updated others when necessary
- Corrected the Port 0 MAC commands decryption
- Changed the way the upper layer is notified. Now it is only notified when all the operations are finished
  
  When a ClassA Tx cycle starts a timer is launched to check every second if everything is finished
- Added a new parameter to LoRaMacEventFlags structure that indicates on which Rx window the data has been received
- Added a new parameter to LoRaMacEventFlags structure that indicates if there is applicative data on the received payload
- Corrected ADR MAC command behavior
- DutyCycle enforcement implementation (EU868 PHY only)
  
  REMARK 1 The regulatory duty cycle enforcement is enabled by default which means that for lower data rates the node may not transmit a new frame as quickly as requested
  The formula used to compute the node idle time is
```
Toff = TimeOnAir / DutyCycle - TxTimeOnAir
```
  Example:
  A device just transmitted a 0.5 s long frame on one default channel This channel is in a sub-band allowing 1% duty-cycle. Therefore this whole sub-band (868 MHz - 868.6 MHz) will be unavailable for 49.5 s.
  
  REMARK 2 The duty cycle enforcement can be disabled for test purposes by calling the LoRaMacSetDutyCycleOn function with false parameter.
- Implemented aggregated duty cycle management
- Added a function to create new channels
- Implemented the missing features on the JoinAccept MAC command
- Updated LoRaMacJoinDecrypt function to handle the CFList field
Added the possibility to chose to use either public or private networks

Changed

Cosmetic updates
Changed the TimeOnAir radio function to return a uint32_t value instead of a double. The value is in us
Changed the GetPosition functions to return a latitude and longitude of 0 and altitude of 65535 when no GPS fix
Due to duty cycle management the applicative API has changed
All applications must be updated accordingly

Removed

Removed support for previous LoRaMac/LoRaWAN specifications

Fixed

Fixed the 250 kHz bandwidth choice for the FSK modem

[3.1.0] - 2015-01-30

General

Release based on "LoRaMac specification R3.0.0"
GitHub reported issues corrections

Added

Started to add support for CooCox CoIDE Integrated Development Environment
Currently only LoRaMote and SensorNode platform projects are available
Added the support of different tool chains for the HardFault_Handler function
Added an invalid bandwidth to the Bandwidths table in order to avoid an error when selecting 250 kHz bandwidth when using FSK modem
Added another timer in order increment the tick counter without blocking the normal timer count
Added the possibility to switch between low power timers and normal timers on the fly
Added an I2C EEPROM driver
Added the possibility to analyze an hard fault interrupt
Added the possibility to configure almost all the MAC parameters
Added the functions to read the Up and Down Link sequence counters

Changed

Updated GCC compiler linker scripts
Changed the RSSI values type from int8_t to int16_t. We can have RSSI values below -128 dBm
Updated radio API to support FHSS and CAD handling
Changed all structures declarations to be packed
Automatically activate the channel once it is created

Fixed

Fixed Radio drivers I&Q signals inversion to be possible in Rx and in Tx
Added some missing radio state machine initialization
Fixed SNR computation on RxDone interrupt
Fixed in SetRxConfig function the FSK modem preamble register name
Fixed RTC alarm setup which could be set to an invalid date
Fixed I2C driver by correcting the 2 bytes internal address management
Corrected buffer read function when more that 1 byte was to be read Added a function to wait for the I2C bus to become IDLE
Fixed and improved USB Virtual COM Port management files
Corrected the USB CDC and USB UART drivers
Fixed RxWindow2 data rate management
Fixed SrvAckRequested variable was never reset
Fixed tstIndoor applications for LoRaMac R3.0 support
Fixed the LoRaMacSetNextChannel function
Fixed the port 0 MAC command decoding
Fixed the Acknowledgment retries management when only 1 trial is needed
Before the device was issuing at least 2 trials
Fixed server mac new channel req answer
Fixed SRV_MAC_RX2_SETUP_REQ frequency handling Added a x100 multiplication
Fixed SRV_MAC_NEW_CHANNEL_REQ
Removed the DutyCycle parameter decoding
Fixed NbRepTimeoutTimer initial value. RxWindow2Delay already contains RxWindow1Delay in it

[3.0.0] - 2014-07-18

General

Release based on "LoRaMac specification R3.0.0"
GitHub reported issues corrections

Added

Added to Radio API the possibility to select the modem

Changed

Changed radio callbacks events to timeout when it is a timeout event and error when it is a CRC error
Radio API updated
Updated ping-pong applications
Updated tx-cw applications
Updated LoRaMac applications in order to handle LoRaMac returned functions calls status
Updated LoRaMac applications to toggle LED2 each time there is an application payload down link
Updated tstIndoor application to handle correctly more than 6 channels
Changed the MPL3115 altitude variable from unsigned to signed value
Changed the usage of pow(2, n) by defining POW2 functions Saves ~2 KBytes of code
MAC commands implemented
- LinkCheckReq YES
- LinkCheckAns YES
- LinkADRReq YES
- LinkADRAns YES
- DutyCycleReq YES
- DutyCycleAns YES
- Rx2SetupReq YES
- Rx2SetupAns YES
- DevStatusReq YES
- DevStatusAns YES
- JoinReq YES
- JoinAccept YES
- NewChannelReq YES
- NewChannelAns YES
Features implemented
- Possibility to shut-down the device YES (Possible by issuing DutyCycleReq MAC command)
- Duty cycle management enforcement NO
- Acknowledgments retries YES
- Unconfirmed messages retries YES

Fixed

Fixed RSSI reading formulas as well as changed the RSSI and SNR values from double to int8_t type
Fixed an issue potentially arriving when LOW_POWER_MODE_ENABLE wasn't defined
A timer interrupt could be generated while the TimerList could already be emptied

[2.3.0-RC2] - 2014-07-10

General

Release based on "LoRaMac specification R2.2.1"
GitHub reported issues corrections

Fixed

Fixed all radios antenna switch low power mode handling
Fixed SX1276 antenna switch control

[2.3.0-RC1] - 2014-06-06

General

GitHub reported issues corrections

Added

Added the support for SX1276 radio
Added Bleeper-76 and SensorNode platforms support
Added to the radio drivers a function that generates a random value from RSSI readings
Added a project to transmit a continuous wave and a project to measure the the radio sensitivity
Added a bootloader project for the LoRaMote and SensorNode platforms
Added a function to the timer driver that checks if a timer is already in the list or not
Added the UART Overrun bit exception handling to the UART driver

Changed

Radio driver RxDone callback function API has changed (size parameter is no more a pointer)
- Previous function prototype:
  void ( *RxDone )( uint8_t *payload, uint16_t *size, double rssi, double snr, uint8_t rawSnr );
- New function prototype:
  void ( *RxDone )( uint8_t *payload, uint16_t size, double rssi, double snr, uint8_t rawSnr );

The LoRaMac application for Bleeper platforms now sends the Selector and LED status plus the sensors values

The application payload for the Bleeper platforms is as follows:
LoRaMac port 1:

{ 0xX0/0xX1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
  ----------  ----------  ----------  ----------  ----
      |           |           |           |        |
SELECTOR/LED  PRESSURE   TEMPERATURE  ALTITUDE  BATTERY
MSB nibble = SELECTOR               (barometric)
LSB bit    = LED

Redefined rand() and srand() standard C functions. These functions are redefined in order to get the same behavior across different compiler tool chains implementations
GPS driver improvements. Made independent of the board platform
Simplified the RTC management
MAC commands implemented
- LinkCheckReq YES
- LinkCheckAns YES
- LinkADRReq YES
- LinkADRAns YES
- DutyCycleReq YES (LoRaMac specification R2.2.1)
- DutyCycleAns YES (LoRaMac specification R2.2.1)
- Rx2SetupReq YES (LoRaMac specification R2.2.1)
- Rx2SetupAns YES (LoRaMac specification R2.2.1)
- DevStatusReq YES
- DevStatusAns YES
- JoinReq YES
- JoinAccept YES (LoRaMac specification R2.2.1)
- NewChannelReq YES (LoRaMac specification R2.2.1)
- NewChannelAns YES (LoRaMac specification R2.2.1)
Features implemented
- Possibility to shut-down the device YES (Possible by issuing DutyCycleReq MAC command)
- Duty cycle management enforcement NO
- Acknowledgments retries WORK IN PROGRESS (Not fully debugged. Disabled by default)
- Unconfirmed messages retries WORK IN PROGRESS (LoRaMac specification R2.2.1)
Due to new specification the LoRaMacInitNwkIds LoRaMac API function had to be modified
- Previous function prototype:
  void LoRaMacInitNwkIds( uint32_t devAddr, uint8_t *nwkSKey, uint8_t *appSKey );
- New function prototype:
  void LoRaMacInitNwkIds( uint32_t netID, uint32_t devAddr, uint8_t *nwkSKey, uint8_t *appSKey );
Changed the LoRaMac channels management
LoRaMac channels definition has been moved to LoRaMac-board.h file located in each specific board directory

Removed

Removed dependency of spi-board files to the __builtin_ffs function
This function is only available on GNU compiler tool suite
Removed --gnu compiler option from Keil projects
Added own __ffs function implementation to utilities.h file
Removed obsolete class1 devices support

Fixed

Fixed Radio continuous reception mode

[2.2.0] - 2014-04-07

General

GitHub reported issues corrections

Added

Added IMST SK-iM880A starter kit board support to the project
- The application payload for the SK-iM880A platform is as follows:
  LoRaMac port 3:
```
    { 0x00/0x01, 0x00, 0x00, 0x00 }
     ----------  ----- ----------
          |        |       |
         LED     POTI     VDD
```

Changed

Ping-Pong applications have been split per supported board
Made fifo functions coding style coherent with the project
UART driver is now independent of the used MCU

Fixed

Fixed the SX1272 output power management
- Added a variable to store the current Radio channel
- Added missing FSK bit definition

[2.1.0] - 2014-03-28

General

GitHub reported issues corrections

Added

Added to the radio driver the possibility to choose the preamble length and rxSingle symbol timeout in reception
Added Hex coder selector driver for the Bleeper board
Added acknowledgments retries management
- Split the LoRaMacSendOnChannel function in LoRaMacPrepareFrame and LoRaMacSendFrameOnChannel LoRaMacSendOnChannel now calls the 2 newly defined functions
  WARNING: By default the acknowledgment retries specific code isn't enabled
  The current http://iot.semtech.com server version doesn't support it
Added LORAMAC_EVENT_INFO_STATUS_MAC_ERROR event info status

Changed

The timers and RTC management has been rewritten
Improved the UART and UP501 GPS drivers
Changed copyright Unicode character to (C) in all source files
MAC commands implemented
- LinkCheckReq YES
- LinkCheckAns YES
- LinkADRReq YES
- LinkADRAns YES
- DevStatusReq YES
- DevStatusAns YES
- JoinReq YES
- JoinAccept YES

Fixed

Fixed GPIO pin names management
Fixed the antenna switch management in the SX1272 driver
Fixed issues on JoinRequest and JoinAccept MAC commands

[2.0.0] - 2014-02-21

General

GitHub reported issues corrections

Added

Added new MAC layer application API implementation
Added sensors drivers implementation

Changed

The LoRaMac applications now sends the LED status plus the sensors values For the LoRaMote platform the application also sends the GPS coordinates

The application payload for the Bleeper platform is as follows:
LoRaMac port 1:

  { 0x00/0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
   ----------  ----------  ----------  ----------  ----
       |           |           |           |        |
      LED      PRESSURE   TEMPERATURE  ALTITUDE  BATTERY
                                     (barometric)

The application payload for the LoRaMote platform is as follows:
LoRaMac port 2:

  { 0x00/0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
    ----------  ----------  ----------  ----------  ----  ----------------  ----------------  ----------
        |           |           |           |        |           |                 |              |
       LED      PRESSURE   TEMPERATURE  ALTITUDE  BATTERY    LATITUDE          LONGITUDE      ALTITUDE
                                      (barometric)                                              (gps)

Changed applications examples according to the new MAC layer API
MAC commands implemented
- LinkCheckReq YES
- LinkCheckAns YES
- LinkADRReq YES
- LinkADRAns YES
- DevStatusReq YES
- DevStatusAns YES
- JoinReq YES (Not tested)
- JoinAccept YES (Not tested)

Known bugs

Still some issues with RTC/Timer. Will be solved in a future version

[1.1.0] - 2014-01-24

General

GitHub reported issues corrections

Added

Implemented an application LED control
- If the server sends on port 1 an application payload of one byte with the following contents:
```
0: LED off
1: LED on
```
The node transmits periodically on port 1 the LED status on 1st byte and the message "Hello World!!!!" the array looks lik
```
 { 0, 'H', 'e', 'l', 'l', 'o', ' ', 'W', 'o', 'r', 'l', 'd', '!', '!', '!', '!' }
```

Changed

MAC commands implemented
- LinkCheckReq NO
- LinkCheckAns NO
- LinkADRReq YES
- LinkADRAns YES
- DevStatusReq YES
- DevStatusAns YES

Known bugs

There is an issue when launching an asynchronous Timer. Will be solved in a future version

[1.1.0-RC1] - 2014-01-20

Added

Added Doc directory. The directory contains:
- LoRa MAC specification
- Bleeper board schematic

Changed

Changed LoRaMac according to Release1 of the specification. Main changes are:
- MAC API changed
- Frame format
- ClassA first ADR implementation
- MAC commands implemented
  - LinkCheckReq NO
  - LinkCheckAns NO
  - LinkADRReq YES
  - LinkADRAns NO
  - DevStatusReq NO
  - DevStatusAns NO
Timers and RTC rewriting. Known bugs are:
- The Radio wakeup time is taken in account for all timings
- When opening the second reception window the microcontroller sometimes doesn't enter in low power mode

[1.0.0] - 2013-11-28

General

Initial version of the LoRa MAC node firmware implementation

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

Changelog

LoRaWAN pre-certification results

[Unreleased]

[4.6.0] - 2022-01-11

General

Known limitations

Added

Changed

Fixed

Removed

[4.5.2] - 2021-05-28

General

Known limitations

Added

Changed

Fixed

Removed

[4.5.1] - 2021-01-18

General

Fixed

[4.4.7] - 2021-01-18

General

Changed

Fixed

[4.5.0] - 2020-12-18

General

Added

[4.4.6] - 2020-12-18

General

Changed

Fixed

Removed

[4.5.0-rc.1] - 2020-11-24

General

Added

Changed

Fixed

Removed

[4.4.5] - 2020-10-14

General

Added

Changed

Fixed

[4.4.4] - 2020-05-26

General

Added

Changed

Removed

Fixed

Security

[4.4.3] - 2019-12-17

General

[4.4.2] - 2019-07-19

General

Added

Changed

Removed

Fixed

[4.4.1] - 2018-03-07

General

Added

Removed

[4.4.0] - 2017-09-08

General

Added

Changed

[4.3.2] - 2017-04-19

General

Added

Changed

Removed

Fixed

[4.3.1] - 2017-02-27

General