========================================================================
MOD_AUTH_CAS 1.2 README
========================================================================
Apache CAS Authentication Module for the JASIG/Apereo CAS Server.

========================================================================
LICENSE
========================================================================
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

 https://www.apache.org/licenses/LICENSE-2.0

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 See the License for the specific language governing permissions and
 limitations under the License.

========================================================================
INTRODUCTION
========================================================================
The purpose of this module is to allow an Apache web server to interact
with an authentication server that conforms to the CAS version 1 or 2
protocol or SAML protocol as used by the JASIG/Apereo CAS Server.
At the time of this writing, the CAS protocol specification is here:

https://apereo.github.io/cas/development/protocol/CAS-Protocol-Specification.html

========================================================================
Getting Started
========================================================================

--------------------------------------------------------------------
Linux Distribution Packaging
--------------------------------------------------------------------
mod_auth_cas is available in most major Linux distributions, including
Debian, Ubuntu, Fedora, and is available from EPEL for CentOS and RHEL.


--------------------------------------------------------------------
Building from Source
--------------------------------------------------------------------

The following development libraries and utilities must be installed:
* OpenSSL - 0.9.8c or higher
* Apache Portable Runtime - 1.5.0 or higher
* Apache Portable Runtime Utilities - 1.3.0 or higher
* Apache Web Server - 2.4 or higher
* libcurl - 7.18.2 or higher
* libpcre2 - 10 or higher

Download the distribution via git or tarball.  Because git does not
preserve timestamps, autoconf may determine it is necessary to bootstrap
the project.  If building from source, please start with:

	autoreconf -ivf

Build is performed with the standard Autoconf incantation:

	./configure && make && sudo make install

Edit your Apache configuration to load the mod_auth_cas module:

	LoadModule auth_cas_module /path/to/mod_auth_cas.so

Set a few required parameters in your Apache configuration:

	CASCookiePath /var/cache/apache2/mod_auth_cas/
	CASLoginURL https://login.example.org/cas/login
	CASValidateURL https://login.example.org/cas/serviceValidate

Protect a "Location" or "Directory" block in your Apache
configuration:

	<Location /secured>
		AuthType CAS
		Require valid-user
	</Location>

If attribute-based authorization is also desired, specify cas-attribute
name:value in your Require rule (please note: both attribute name and value are
case-sensitive):

	CASCookiePath /var/cache/apache2/mod_auth_cas/
	CASLoginURL https://login.example.org/cas/login
	CASValidateURL https://login.example.org/cas/samlValidate
	CASValidateSAML On

	<Location /secured>
		AuthType CAS
		Require cas-attribute edupersonaffiliation:staff
	</Location>

Both the CAS 2.0 and SAML 1.1 protocols support including additional attributes
in the CAS validation response, which may also be added as HTTP headers (see
CASAttributePrefix and CASAttributeDelimiter). This example uses the SAML
protocol and requires that the 'edupersonaffiliation' attribute is set to
'staff'.


========================================================================
NEW FEATURES AND FUNCTIONS IN THIS RELEASE
========================================================================
* OpenSSL 1.1 support.
* CASv2 attributes.
* CASPreserveTicket, which allows tickets to pass through when a valid session exists.
* CASGatewayCookieDomain, to set the gateway cookie domain.
* Use a dynamic buffer to store the CAS validation response.
* Various bug and documentation fixes.
https://github.com/apereo/mod_auth_cas/milestone/6?closed=1

========================================================================
KNOWN ISSUES
========================================================================
* Autoconf does not work well on code freshly checked out of git.  Autoconf
 artifacts must be rebuilt using `autoreconf -ivf` .

========================================================================
KNOWN LIMITATIONS
========================================================================
These limitations are known to exists in this release of the software:

* CAS Proxy Validation is not implemented in this version.

* CAS Ticket Validation can only be performed over an SSL connection.
  The CAS protocol does not explicitly require this, but to not do so
  leaves this system open to a man-in-the-middle attack.

* CAS single sign out is currently not functional and disabled.  It
  is only safe to use in the case where all requests are GET and not
  POST (the module inadvertently 'eats' some content of the POST
  request while determining if it should process it as a SAML logout
  request).

* Reports of slow performance on some systems (particularly
  virtual machines) have been reported.  This is related to the
  entropy that is gathered when creating a session cookie for
  the end user.  To combat this, there are 3 solutions.  The
  first is to upgrade the version of the Apache Portable Runtime
  on your system to >= 1.3.0.  In that version, entropy is gathered
  from a nonblocking source.  The second method would be to install
  a package such as rng-tools and feed random data from /dev/urandom
  to /dev/random("-r /dev/urandom").  The  last way is to reduce
  the size of the CASCookieEntropy setting, reducing the demand on
  the pool.

* Win32 support has been dropped (but not removed) due to lack of
  development resources, and seemingly minimal community usage.
  You are welcome to try it, but YMMV for success.



========================================================================
Configuration
========================================================================
First, you must tell Apache to load the module.  In your httpd.conf,
add:

LoadModule auth_cas_module /path/to/mod_auth_cas.so

Then, in the location(s) you want to protect, use the following
directive:

AuthType CAS

Be sure to set authorization parameters in the locations you
are protecting(e.g. 'require valid-user', 'require group foo')

The following are valid configuration options and their default:

Valid Server/VirtualHost Directives
-----------------------------------
Directive: 	CASVersion
Default:	2
Description:	The version of the CAS protocol to adhere to (1 or 2).
		This affects whether Gateway mode is available and how
		the CAS validation response is parsed.

Directive: 	CASDebug
Default:	Off
Description:	Enable or disable debugging mode for troubleshooting.  Please
		note that LogLevel must be set to Debug for the VirtualHost in
		order for these logs to be visible.

Directive:	CASValidateDepth
Default:	9
Description:	This directive will set the maximum depth for chained certificate
		validation.  The default (according to OpenSSL documentation) is 9.

Directive: 	CASCertificatePath
Default:	/etc/ssl/certs/
Description:	The path to the X509 certificate of the Certificate Authority for
		the server in CASLoginURL and CASValidateURL.  This may be either
		a file, or a directory containing the certificate files linked to
		by their hashed names.

Directive: 	CASLoginURL
Default:	NULL
Description:	The URL to redirect users to when they attempt to access a CAS
		protected resource and do not have an existing session.  The
		'service', 'renew', and 'gateway' parameters will be appended to
		this by mod_auth_cas if necessary.  Include 'http[s]://...'

Directive: 	CASValidateURL
Default:	NULL
Description:	The URL to use when validating a ticket presented by a client in
		the HTTP query string (ticket=...).  Must include 'https://' and
		must be an HTTPS URL.

Directive: 	CASProxyValidateURL
Default:	NULL
Description:	The URL to use when performing a proxy validation.  This is currently
		an unimplemented feature, so setting this will have no effect.

Directive: 	CASRootProxiedAs
Default:	NULL
Description:	This URL represents the URL that end users may see in the event that
		access to this Apache server is proxied.  This will override the
		automatic generation of service URLs and construct them using this
		prefix.  As an example: If the site being protected is http://example.com/
		and the Apache instance of this server is http://internal.example.com:8080,
		setting CASRootProxiedAs to http://example.com would result in proper
		service parameter generation.

Directive: 	CASCookiePath
Default:	/dev/null
Description:	When users first authenticate to mod_auth_cas with a valid service ticket,
		a local session is established.  Information about this session (the
		username, time of creation, last activity time, the resource initially
		requested, and whether or not the credentials were renewed) is stored
		in this directory.  This location should be writable by the web server ONLY.
		Any user that can write to this location can falsify authentication information
		by creating a fake data file.
		NOTE : Some distributions purge the contents of /tmp/ on a reboot, including
		user created directories.  This will prevent mod_auth_cas from storing
		cookie information until that directory is created.  To avoid this, try
		using a different location, such as /var/cache/apache2/mod_auth_cas/

Directive: 	CASCookieEntropy
Default:	32
Description:	When creating a local session, this many random bytes are used to
		create a unique session identifier.  Using large values for this
		field may result in delays when generating session IDs if not
		enough entropy is available.

Directive: 	CASTimeout
Default:	7200 (2 hours)
Description:	This is the hard limit, in seconds, for a mod_auth_cas session (whether
		it is idle or not).  When a session has reached this age and a new
		request is made, the user is redirected to the CASLoginURL to
		obtain a new service ticket.  When this new ticket is validated,
		they will be assigned a new mod_auth_cas session.  Set this value to '0'
		in order to allow a non-idle session to not expire.

Directive: 	CASIdleTimeout
Default:	3600 (1 hour)
Description:	This is a limit, in seconds, of how long a mod_auth_cas session can be idle.
		When a request comes in, if it has been inactive for CASIdleTimeout
		seconds, the user is redirected to the CASLoginURL to obtain a new
		service ticket.

Directive: 	CASCacheCleanInterval
Default:	1800 (30 minutes)
Description:	This is the minimum amount of time that must pass inbetween cache
		cleanings.  When a new ticket is issued, or when an expired session
		is presented, the time of the last cache clean is compared against
		this value.  If CASCacheCleanInterval seconds have passed since the
		last cleaning, then all files in CASCookiePath are examined and if
		they have expired, they are removed.  This is merely to prevent the
		file system from becoming excessively cluttered.

Directive:	CASCookieDomain
Default:	NULL
Description:	Specify the value for the 'Domain=' parameter in the Set-Cookie header.

Directive:	CASCookieSameSite
Default:	NULL
Description:	Specify the value for the 'SameSite=' parameter in the Set-Cookie header.
		Allowed values are 'None', 'Lax', and 'Strict'.

Directive:	CASCookieHttpOnly
Default:	On
Description:	Set the optional 'HttpOnly' flag for cookies issues by mod_auth_cas.
		Set the HttpOnly flag as described in in RFC 6265.  This flag prevents the
		mod_auth_cas cookies from being accessed by client side Javascript.

Directive:	CASCookieSecure
Default:	Auto
Description:	Set the optional 'Secure' attribute for cookies issued by mod_auth_cas.
		Set the Secure attribute as described in in RFC 6265. This flag prevents the
		mod_auth_cas cookies from being sent over an unencrypted HTTP connection.
		By default, mod_auth_cas sets the 'Secure' attribute depending on information about
		the connection (the 'Auto' option). The options 'On' and 'Off' can be used to override
		the automatic behaviour.

Directive:	CASAuthoritative
Default:	Off
Description:	This directive determines whether an optional authorization directive
		(see 'Require cas-attribute') is authoritative and thus binding or
		if other authorization modules will also be applied.
		'On' means authoritative, 'Off' means not authoritative.
		NOTE: This directive is unavailable with Apache 2.4. See the RequireAny,
		RequireNone, and RequireAll directives instead.

Directive:	CASValidateSAML
Default:	Off
Description:	If enabled, the response from the CAS Server will be parsed for SAML
		attributes which will be associated with the user.  Requires setting
		CASValidateURL appropriately; typical URLs are of the form
		https://login.example.org/cas/samlValidate.

Directive:	CASAttributePrefix
Default:	CAS_ (Apache < 2.4)
		CAS- (Apache 2.4)
Description:	The prefix to use when adding CAS or SAML attributes to the HTTP headers,
		which will be named <CASAttributePrefix><attr_name>.  CASAuthNHeader
		must be set for this directive to be used.
		NOTE: In Apache 2.4 and newer, headers containing "invalid" characters
		(including underscores) are silently dropped, so you must set this to
		a "valid" name containing only alphabetic characters and hyphens.

Directive:	CASAttributeDelimiter
Default:	,
Description:	mod_auth_cas will set the value of the attribute header (as described
		in CASAttributePrefix) to <attrvalue><CASAttributeDelimiter><attrvalue>
		in the case of multiple attribute values.

Directive:	CASPreserveTicket
Default:	Off
Description:	This directive leaves CAS ticket parameters intact when a valid
		session cookie exists. This helps prevent infinite redirect loops when
		CAS protection is being used at multiple levels.

Directive:	CASGatewayCookieDomain
Default:	NULL
Description:	Specify the value for the 'Domain=' parameter in the Set-Cookie header
		when setting the CASGatewayCookie.

Valid Directory/.htaccess Directives
------------------------------------
Directive:	CASScope
Default:	Off
Description:	Use this directive with an argument as a relative path (e.g. /application/) to specify
		the scope for which a mod_auth_cas cookie is valid.  This is beneficial to prevent
		additional round trips to the CAS server.  Assume someone authenticates to /application/subdir/
		and then browses to /application/ - without CASScope set, each request would result in
		a round trip to the CAS server and a new cookie being created (one for each directory).
		CASScope would set one cookie, which will be presented on access to both directories.
		Note that if someone accessed /application/ and then /application/subdir/ this would not
		be an issue, but that order of access can not be guaranteed.  To disable this feature,
		the special argument 'Off' will return to per-directory cookie paths for this directory
		and subdirectories.

Directive: 	CASRenew
Default:	Off
Description:	Use this directive with an argument as a relative path (e.g. /application/secure/
		for http://www.example.com/application/secure/*) to force a user to renew their
		credentials when accessing that directory.  The argument MUST be a relative path.
		To disable this requirement, the special argument 'Off' will disable this requirement
		for this directory and subdirectories.

Directive: 	CASGateway
Default:	Off
Description:	Use this directive with an argument as a relative path (e.g. /application/insecure/
		for http://www.example.com/application/insecure/*) to allow anonymous access to that directory.
		The argument MUST be a relative path. To disable this feature, the special argument 'Off'
		will reinstate the requirement for authentication.

Directive: 	CASCookie
Default:	MOD_AUTH_CAS
Description:	The name of the cookie used to store the session ID over HTTP connections.
		It should be changed if it will interfere with the application protected
		by mod_auth_cas.

Directive: 	CASSecureCookie
Default:	MOD_AUTH_CAS_S
Description:	The name of the cookie used to store the session ID over HTTPS connections.
		It should be changed if it will interfere with the application protected
		by mod_auth_cas.

Directive: 	CASGatewayCookie
Default:	MOD_AUTH_CAS_G
Description:	The name of the cookie used to store whether or not the user has attempted
		to access this resource before.  It should be changed if it will interfere
		with the application protected by mod_auth_cas.

Directive:	CASAuthNHeader
Default:	None
Description:	If enabled, this will store the user returned by CAS in the specified
		HTTP header accessible to your web applications, and any additional
		attributes received in headers named according to CASAttributePrefix.
		This is in addition to the REMOTE_USER environment variable, which is
		always set to the CAS user.

Directive:	CASSSOEnabled
Default:	Off
Description:	If enabled, this activates support for Single Sign Out within the CAS
		protocol.  Please note that this feature is currently experimental and
		may mangle POST data.

Directive:	CASScrubRequestHeaders
Default:	Off
Description:	mod_auth_cas will strip request inbound request headers that may have
		special meaning, such as those set with the CASAttributePrefix or the
		CASAuthNHeader value.

Directive:	Require cas-attribute <attribute>:<value>
Default:	NULL
Description:	Use this directive to authorize based on CAS or SAML attributes
		returned via the session validation call. Multiple directives
		are OR-ed. If directive is present with no attributes defined,
		the request is declined. If value has spaces, wrap the pair in quotes.
		See also CASAuthoritative.

Directive:	Require cas-attribute <attribute>~<value>
Default:	NULL
Description:	Use this form of the directive to authorize based on CAS or SAML
		attributes returned via the session validation call. Multiple
		directives are OR-ed. If directive is present with no attributes
		defined, the request is declined. The value is interpreted as a
		Perl-Compatible Regular Expression (PCRE) using case-sensitive
		matching. See also CASAuthoritative.

========================================================================
CONTACT INFORMATION AND WEBSITE
========================================================================
We welcome your feedback, suggestions and contributions. Contact us
via email if you have questions, feedback, code submissions,
and bug reports.  To reach the development team, send an e-mail to:

cas-user [at] apereo [dot] org

Google Group link:

https://groups.google.com/a/apereo.org/forum/#!forum/cas-user

========================================================================