Skip to content

FAQ

Jump to bottom
JaKooLit edited this page Jul 5, 2024 · 84 revisions

❓ Some FAQ on KooL Hyprland-Dots

🙋 How to uninstall this

  • As stated on each readme on Distro-hyprland install scripts

Important

install a backup tool like snapper or timeshift. and Backup your system before installing hyprland using this script. This script does NOT include uninstallation of packages

Note

Main reason why I have not included an uninstallation script is simple. Some packages maybe already installed on your system by default. If I create an uninstall script with packages that I have set to install, you may end up a unrecoverable system.

⁉️ After installing on Gnome or Plasma, after reboot, it boots into Gnome or Plasma

  • Disable auto-login and logout
  • Choose Hyprland on either GDM or SDDM as shown below. If you dont have Hyprland in the option, Hyprland may not be instaled properly. Rerun the install script ./install.sh from the Distro-Hyprland install script you used to install Kool's Dots

🖥️ Will it work on a VM, VMware, Virtualbox or any virtualization?

  • Most probably. Just ensure 3D acceleration is enabled. However, do take note that Hyprland performance on a VM is crap

🖥️ It goes back to log-in Manager after install

  • Check logs. Probably Hyprland or any other packages was not installed properly. Or if you are using a VM, See above
  • You can also try to ran Hyprland manually. CTRL ALT F2 or F3, login as user. Once logged in, type Hyprland. If command not found, check installation log or you can re-ran script

♨️ How to change wallpaper

  • Just add your wallpaper in ~/Pictures/wallpapers and choose it with SUPER W.
  • NOTE: wallpaper file name should not contain any space. you could use - or _ as spacers
  • However, do note that automatic wallpaper change still in effect by default. See below for disabling the automatic wallpaper change
  • Dark & Light wallpapers are placed in ~/Pictures/wallpapers/Dynamic-Wallpapers/
  • If you want to change and make it permanent, edit ~.config/hypr/UserConfigs/Startup_Apps.conf

♨️ Automatic wallpaper change

  • Disabled by default from v2.2.13-1. You can re-enable by editing as stated below
  • By default, it is changing wallpaper every 30 mins. If you dont want that, you can edit ~.config/hypr/UserConfigs/Startup_Apps.conf with your favorite text editor or SUPER E , choose view Execs.conf . comment by adding # on exec-once = $SwwwRandom $WallpaperPath # random wallpaper switcher every 30 minutes. Reboot to take effect as logout does not work since the initial part of script (timer) is already loaded in system's memory
  • From Hyprland-Dots v2.2, the Automatic wallpaper script will not refresh waybar anymore. Means the wallust colors on waybars wont take effect. To quickly apply the wallust colors on waybar, you can press SUPER ALT R to refresh it.

♨️ Waybar modules are missing on some waybar layouts.

  • Every waybar layouts are unique. You need to add manually or reorganize the waybar modules according to your preference.
  • Make sure that once you do the changes, to rename the configs and styles. So you can easily copy over whenever there is an update.

♨️ Dont like Rainbow borders?

  • KooL's Dots v2.3.1, will be offered as optional during copy / installation.
  •

♨️ colorful borders and just one simple border colors?

  • KooL's Dots v2.3.1, will be offered as one color only
  • Note that by default is sourcing colors from wallust. If you dont want the wallust color, around line 8 delete or put # on source = $HOME/.config/hypr/wallust/wallust-hyprland.conf .
  • all the one with $color0-15 are from wallust-colors. Set colors how ever you want. Hyprland WIKI

♨️ Don't like pokemon-colorscripts?

  • you can uninstall it. For arch - sudo pacman -Rns pokemon-colorscripts-git & edit ~/.zshrc
  • other distro. Navigate to your downloaded -Hyprland folder. look for pokemon-colorscripts. cd into it. chmod +x uninstall.sh , then ./uninstall.sh
  • or if you just want to disable it, edit your ~/.zshrc . Comment out (#) the pokemon part.

♨️ Dont like nano or kitty for Quick Editor or Super E? (quick editor)

  • edit ~/.config/hypr/UserScripts/QuickEdit.sh

♨️ Themes are broken when changing dark light or NO THEMES after installing even opted to install GTK Themes

  • Check contents of ~.themes and ~.icons . If no contents, you can download from here GTK Themes & Icons Link
  • Press the dark light button on waybar "󰔎" to switch between dark or light and gtk theme to take effect. Or use nwg-look utility to adjust GTK settings.
  • If you opt for GTK themes, Bibata cursor was also downloaded in your system.
  • You can also install your own dark and light themes and icons. Just ensure to rename the themes icons with -Dark or -Light as this is the reference keyword that script is looking for if you want to utilize the dark / light transition script.

♨️ Adjusting fonts sizes and font scaling including waybar fonts and kitty (terminal)

  • nwg-look is a very good app. Use it to adjust your own preference.
  • for qt-apps, use qt5ct and/or qt6ct and kvantum
  • HiDPI users, I suggest you do the following to have a better appearance.

  • adjust scaling according to your taste by editing ~/.config/hypr/UserConfigs/Monitors.conf

  • adjust font size using nwg-look (GTK Settings)

  • You can tweak the fonts scaling in Font tab in nwg-look

  • Lastly, if desired, adjust waybar fonts sizes in ~/.config/waybar/styles/ . NOT the styles.css since that is only a symlink to the styles in waybar styles folder

  • to adjust Kitty fonts, edit ~/.config/kitty/kitty.conf. If you are using wallust to change your kitty background, change the settings in ~/.config/wallust/templates/kitty.conf

♨️ Keyboard shortcuts or customized Keybinds are broken!

  • copy over your previous Keybinds.conf from the hypr-backups in ~/.config/hypr/Userconfigs

♨️ Wallust color changed on tty or kitty

  • starting Hyprland-Dots v2.2.11, the tty and kitty wallust color change are disabled by default.
  • by running wallust run /path/wallpaper, it will change the tty immediately. To make it permanent, edit ~/.config/wallust/wallust.toml . This will overwrite kitty.conf so change the settings or put your kitty configs, along with color palette in ~/.config/wallust/templates/kitty.conf
  • to change tty colors after wallpaper change, edit the ~/.config/hypr/scripts/WallustSwww.sh remove the -s in wallust run "$wallpaper_path" -s & (located at the end)

❔ Some packages are opening on a specific workspaces

  • By default, some apps like discord, start and open on workspace 7. etc. You can change this behaviour by editing ~/.config/hypr/UserConfigs/WindowRules.conf You will find a lines with # windowrule v2 move to workspace and # windowrule v2 move to workspace (silent) . Edit as per your preference

🔔 swaync no backlight

  • you maybe dont have intel_backlight . Check HERE

💻 Laptop, while lid was closed, whenever do changes on settings or automatic wallpaper change, the main laptop display woke's up or re-enabled.

  • it is now offered as optional in v2.1.18 . See notes on Laptops.conf and LaptopDisplay.conf in ~/.config/hypr/UserConfigs/ )
  • The reason being optional is that there is a CON for doing this. See NOTES in Laptops.conf
  • or one solution if you have only 1 external monitor, is to just mirror your laptop display :)

📽️ Screen Recording like OBS

  • Install pipewire and OBS
  • If OBS screenshare still does not work, you could try forcing to start the xdg-desktop-portal-hyprland. Edit (xdg-desktop-portal-hyprland) in ~/.config/hypr/UserConfigs/Startup_Apps.conf Remove # before exec-once=$scriptsDir/PortalHyprland.sh . Logout and relogin

⌨️ Added keybinds but does not work

  • make sure that it does not conflict with other pre-defined keybinds in ~/.config/hypr/configs/Keybinds.conf. If you think that I should change the pre-defined Keybinds due to conflict with i.e Global Shortcuts, let me know through github or on my Discord Server. Make sure to present a valid argument
  • Starting v2.2.2 add your own keybinds in ~/.config/hypr/UserConfigs/UserKeybinds.conf

🎼 cava does not work

  • unmute the mic

⌛ Automatic Screenlock

  • by default, it is configured that screen will lock in 10 mins.
  • to change this settings, edit ~/.config/hypr/hypridle.conf
  • if you dont want automatic screenlock, edit ~/.config/hypr/UserConfigs/Startup_Apps.conf comment out or delet line 38 exec-once = hypridle -q
  • Alternatively, activate the idle_inbitor on your waybar. Thats the

⌨️ Keyboard layout unset error

  • This happens because when asked about your keyboard layout during copy / installation, you just answered y even detected layout is (unset)
  • edit kb_layout in ~/.config/hypr/UserConfigs/UserSettings.conf line 96 . Type in your proper kb_layout. i.e. us . Use command localectl list-keymaps . More info from here Arch Linux Wiki Keyboard Configuration

⌨️ Keyboard layout switch.

  • pls see this PR Pull Request #292
  • a note from author ["If the layout in the waybar does not match the current keyboard layout, run: echo "us" > ~./.cache/kb_layout instead of "us", put the identifier of the current keyboard layout, for example "ru" or "en" or "ua", etc."]

🐢 delayed launching of hyprlock (screen lock)

  • the weather module on hyprlock gives about 3-5 seconds of delay. fixed on Hyprland-Dots v2.2.11
  • configuration of hyprlock is in ~/.config/hypr/hyprlock.conf hyprlock link

🆕 Rofi not getting auto focus, or some weird things going on with rofi

  • Make sure you installed the ROFI-WAYLAND. Rofi will work but you will have some small issues
  • ROFI-wayland LINK

🫓 Flatpak apps not showing in rofi

🔑 installed zsh but no autostart of Hyprland after login

  • This was disabled a few days ago. (19 May 2024). This was because some users, after they used the Distro-Hyprland scripts with other DE (gnome-wayland or plasma-wayland), if they choose to login into gnome-wayland for example, Hyprland is starting.
  • to avoid this, I disabled it. You can re-enable again by editing ~/.zprofile . Remove all the # on the first lines

☀️ Cant control brightness of monitor on laptop

🔣 waybar-cava broken

  • This is because LANG on locale was not set. You can set your system locale by
sudo localectl set-locale LANG=en_US.UTF-8
  • set the LANG=en_US.UTF-8 according to your locale. See this Arch Wiki . Note this wiki is applicable for any systemd distros

🫢 waybar idle-inhibitor

  • this one is mostly ask. LINK

Home

Installation

FAQ & TIPS

Keybinds

Known Issues & Notes to remember

Changelogs & Release Notes

Other Distros

Gallery & Youtube Videos

HOW TO's (Costumization on KooL's Dots)

Clone this wiki locally