diff --git a/README.md b/README.md
index 6d51513..ab0bb8b 100644
--- a/README.md
+++ b/README.md
@@ -108,7 +108,6 @@ Off course you can also set *field weakening*. When left empty the bike operates
At this point in time I can't give any advise on the "best" values. Just determine them with trail and error.
**Note**: empty fields are not send to the bike. The default values stored in the motor controller are used. As stated before don't use the *FLASH* button in the main app when your bike was unlocked using a preset. First lock your bike then start the main app to do alterations.
-
##### V1+ Headlight bug
A bug on the V1+ is a non working headlight, the taillight still works.
Can it be fixed? With the Cowboy Untamed app you can reset your PCB. This will not reset any settings but only reboot the communications PCB. 9 out of 10 times the headlight bug will be fixed (for a while). There is no fix from Cowboy yet.
Connect to your bike with the Cowboy Untamed app. Go to the *Expert Settings* and press the *Reset PCB* button. This will reboot the bike, shown by "running lights" on the main tube LEDs.
@@ -118,6 +117,26 @@ For me the sweetspot between excercise and still going fast came up with the fol
- Field Weakening: **18**
- Peddle Max Torque: **85**
+#### Auto Unlock (V1+)
+I can confirm *Auto Unlock* is atleast working up to firmware V4.8.16 (V1+).
+**Note:** after locking the bike has a grace period of a few minutes before enabling *Auto Unlock* after it's locked. Also your phone must been out of reach of the bike. For testing you can temporarely disable bleutooth.
+
+The way to get it working:
+- Connect to your bike with the *Cowboy Untamed* app.
+- Switch on *Auto Unlock*.
+- Disconnect from your bike in the *Cowboy Untamed* app.
+- Disable bluetooth (for testing only).
+- Wait for a minute or two.
+- Enable bluetooth.
+- Start the *original Cowboy* app.
+- The LEDs on the bike should turn on and off slowly.
+- The app should show you an *Auto Unlock* notification.
+- Move your bike to unlock it.
+
+
+
+https://user-images.githubusercontent.com/68418842/121816038-a36ef880-cc79-11eb-8c68-637a619ac671.mp4
+
## The future
I think there is a quite solid base now for the future. Offcourse removing the speed limit was my main goal. Second I wanted to make shortcuts which I could use via *Tasker*.
I have discussed with other bikers and some of us would like to be able to set the support level. When you want to ride along with a non e-biker the support should be a lot less. The idea is to make speed dependant support. Let's say 0-10km/h you get the current support, 11-22km/h low to no support, 23->km/h regular untamed support. The levels can be set by the user. You can activate them via a long press shortcut.
These are ideas. I'm now ready to start exploring how to. I believe it can be done, but I want to do some serious testing with my own bike before I release it into the wild.
**2021-05-29**: Finally some nice weather. I did some testing this morning. At his point I made the following discoveries: