diff --git a/README.md b/README.md index 2132e9d4..09c48183 100644 --- a/README.md +++ b/README.md @@ -30,7 +30,7 @@ I am currently selling fully set up Joustmania devices (pi, case, bluetooth dong If you would like to build your own device you will need the following: -* A Raspberry Pi 3 B with sd card +* A Raspberry Pi 4 B with sd card Optional and recommended: @@ -45,14 +45,11 @@ Optional: This will allow you to charge 9 controllers at once through the pi -A good power supply is recommended, (if you see a lightning bolt at the top right of your screen it means your pi is under voltage) Something like this should work well: (https://www.amazon.com/dp/B00L88M8TE) - - Installation --------------------------- -0. [Download](https://www.raspberrypi.org/downloads/raspbian/) and [Install](https://www.raspberrypi.org/documentation/installation/installing-images/README.md) Raspbian on the micro SD card, this build was tested on the full version of raspian stretch. +0. [Download](https://www.raspberrypi.org/downloads/raspbian/) and [Install](https://www.raspberrypi.org/documentation/installation/installing-images/README.md) Raspbian on the micro SD card, this build was tested on the full version of raspian buster. 0. Connect the bluetooth adapters and speaker 0. Turn on the pi, open a Terminal and run these commands, the pi will reboot on a successful install 0. If prompted about restarting services select yes