Makefile.in

# Makefile.in generated automatically by automake 1.5 from Makefile.am.

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  Makefile for FastCGI development kit
#
#  $Id: Makefile.am,v 1.7 2001/12/22 13:05:39 robs Exp $
#

SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AMTAR = @AMTAR@
AS = @AS@
AWK = @AWK@
CC = @CC@
CPP = @CPP@
CXX = @CXX@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
ECHO = @ECHO@
ECHO_CPP = @ECHO_CPP@
EXEEXT = @EXEEXT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBFCGIXX = @LIBFCGIXX@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PTHREAD_CC = @PTHREAD_CC@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
RANLIB = @RANLIB@
STRIP = @STRIP@
SYSTEM = @SYSTEM@
THREADED = @THREADED@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
install_sh = @install_sh@

SUBDIRS = libfcgi cgi-fcgi examples include

include_HEADERS = fcgi_config.h

EXTRA_DIST = LICENSE.TERMS              \
             Makefile.nt                \
             cgi-fcgi/cgi-fcgi.mak      \
             examples/authorizer.mak    \
             examples/echo.mak          \
             examples/echox.mak         \
             examples/size.mak          \
             examples/echo-cpp.mak      \
             libfcgi/libfcgi.mak        \
             images/aplib-hd.gif        \
             images/divider.gif         \
             images/fcgi-hd.gif         \
             images/mail-hd.gif         \
             images/navbar.gif          \
             images/serv-hd.gif         \
             images/words-hd.gif        \
             include/fcgi_config_x86.h  \
             java/FCGIGlobalDefs.java   \
             java/FCGIInputStream.java  \
             java/FCGIInterface.java    \
             java/FCGIMessage.java      \
             java/FCGIOutputStream.java \
             java/FCGIRequest.java      \
             libfcgi/os_unix.c          \
             libfcgi/os_win32.c         \
             perl/ChangeLog             \
             perl/FCGI.PL               \
             perl/FCGI.XL               \
             perl/MANIFEST              \
             perl/Makefile.PL           \
             perl/README                \
             perl/aclocal.m4            \
             perl/configure             \
             perl/configure.in          \
             perl/echo.PL               \
             perl/fcgi_config.h.in      \
             perl/oldinterface.pod      \
             perl/remote.PL             \
             perl/threaded.PL           \
             perl/typemap               \
             perl/version.pm            \
             Win32/FastCGI.dsw          \
             Win32/authorizer.dsp       \
             Win32/cgifcgi.dsp          \
             Win32/echo-cpp.dsp         \
             Win32/echo.dsp             \
             Win32/echox.dsp            \
             Win32/libfcgi.dsp          \
             Win32/logdump.dsp          \
             Win32/size.dsp             \
             Win32/threaded.dsp         \
             doc/FCGI_Accept.3          \
             doc/FCGI_Finish.3          \
             doc/FCGI_SetExitStatus.3   \
             doc/FCGI_StartFilterData.3 \
             doc/cgi-fcgi.1             \
             doc/fcgi-devel-kit.htm     \
             doc/fcgi-java.htm          \
             doc/fcgi-perf.htm          \
             doc/fcgi-perl.htm          \
             doc/fcgi-spec.html         \
             doc/fcgi-tcl.htm           \
             doc/omi-logo.gif           \
             doc/overview.html          \
             doc/www5-api-workshop.html \
             doc/fastcgi-prog-guide/ap_guida.htm        \
             doc/fastcgi-prog-guide/ap_guide.htm        \
             doc/fastcgi-prog-guide/apaman.htm          \
             doc/fastcgi-prog-guide/ch1inta1.gif        \
             doc/fastcgi-prog-guide/ch1intra.gif        \
             doc/fastcgi-prog-guide/ch1intro.htm        \
             doc/fastcgi-prog-guide/ch2c.htm            \
             doc/fastcgi-prog-guide/ch3perl.htm         \
             doc/fastcgi-prog-guide/ch4tcl.htm          \
             doc/fastcgi-prog-guide/cover.htm           \
             doc/fastcgi-prog-guide/covera.gif          \
             doc/fastcgi-whitepaper/fastcgi.htm         \
             doc/fastcgi-whitepaper/img00001.gif        \
             doc/fastcgi-whitepaper/img00002.gif        \
             doc/fastcgi-whitepaper/img00003.gif

subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
CONFIG_HEADER = fcgi_config.h
CONFIG_CLEAN_FILES =
DIST_SOURCES =
HEADERS = $(include_HEADERS)


RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
	uninstall-info-recursive all-recursive install-data-recursive \
	install-exec-recursive installdirs-recursive install-recursive \
	uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = README $(include_HEADERS) ./stamp-h.in Makefile.am \
	Makefile.in acinclude.m4 aclocal.m4 compile config.guess \
	config.sub configure configure.in depcomp fcgi_config.h.in \
	install-sh ltmain.sh missing mkinstalldirs
DIST_SUBDIRS = $(SUBDIRS)
all: fcgi_config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool
$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) && \
	  CONFIG_HEADERS= CONFIG_LINKS= \
	  CONFIG_FILES=$@ $(SHELL) ./config.status

$(top_builddir)/config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure:  $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

$(ACLOCAL_M4):  configure.in acinclude.m4
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
fcgi_config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/fcgi_config.h.in $(top_builddir)/config.status
	@rm -f stamp-h stamp-hT
	@echo timestamp > stamp-hT 2> /dev/null
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=fcgi_config.h \
	     $(SHELL) ./config.status
	@mv stamp-hT stamp-h
$(srcdir)/fcgi_config.h.in:  $(srcdir)/./stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/./stamp-h.in; \
		$(MAKE) $(srcdir)/./stamp-h.in; \
	else :; fi
$(srcdir)/./stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	@rm -f $(srcdir)/./stamp-h.in $(srcdir)/./stamp-h.inT
	@echo timestamp > $(srcdir)/./stamp-h.inT 2> /dev/null
	cd $(top_srcdir) && $(AUTOHEADER)
	@mv $(srcdir)/./stamp-h.inT $(srcdir)/./stamp-h.in

distclean-hdr:
	-rm -f fcgi_config.h
uninstall-info-am:
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(includedir)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " $(INSTALL_HEADER) $$d$$p $(DESTDIR)$(includedir)/$$f"; \
	  $(INSTALL_HEADER) $$d$$p $(DESTDIR)$(includedir)/$$f; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; for p in $$list; do \
	  f="`echo $$p | sed -e 's|^.*/||'`"; \
	  echo " rm -f $(DESTDIR)$(includedir)/$$f"; \
	  rm -f $(DESTDIR)$(includedir)/$$f; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) fcgi_config.h.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)fcgi_config.h.in$$unique$(LISP)$$tags" \
	  || etags $(ETAGS_ARGS) $$tags fcgi_config.h.in $$unique $(LISP)

GTAGS:
	here=`CDPATH=: && cd $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = .
# Avoid unsightly `./'.
distdir = $(PACKAGE)-$(VERSION)

GZIP_ENV = --best

distdir: $(DISTFILES)
	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
	mkdir $(distdir)
	$(mkinstalldirs) $(distdir)/Win32 $(distdir)/cgi-fcgi $(distdir)/doc $(distdir)/doc/fastcgi-prog-guide $(distdir)/doc/fastcgi-whitepaper $(distdir)/examples $(distdir)/images $(distdir)/include $(distdir)/java $(distdir)/libfcgi $(distdir)/perl
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    $(mkinstalldirs) "$(distdir)/$$dir"; \
	  fi; \
	  if test -d $$d/$$file; then \
	    cp -pR $$d/$$file $(distdir) \
	    || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$(top_distdir)" \
	        distdir=../$(distdir)/$$subdir \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
	GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf -
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	chmod a-w $(distdir)
	dc_install_base=`CDPATH=: && cd $(distdir)/=inst && pwd` \
	  && cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \
	     || (echo "Error: files left after uninstall" 1>&2; \
	         exit 1) ) \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && $(MAKE) $(AM_MAKEFLAGS) distclean \
	  && rm -f $(distdir).tar.gz \
	  && (test `find . -type f -print | wc -l` -eq 0 \
	     || (echo "Error: files left after distclean" 1>&2; \
	         exit 1) )
	-chmod -R a+w $(distdir) > /dev/null 2>&1; rm -rf $(distdir)
	@echo "$(distdir).tar.gz is ready for distribution" | \
	  sed 'h;s/./=/g;p;x;p;x'
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS) fcgi_config.h
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs) $(DESTDIR)$(includedir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES) stamp-h stamp-h[0-9]*

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

dist-all: distdir
	$(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	-chmod -R a+w $(distdir) >/dev/null 2>&1; rm -rf $(distdir)
distclean: distclean-recursive
	-rm -f config.status config.cache config.log
distclean-am: clean-am distclean-generic distclean-hdr distclean-libtool \
	distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am: install-includeHEADERS

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

uninstall-am: uninstall-includeHEADERS uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
	clean-generic clean-libtool clean-recursive dist dist-all \
	distcheck distclean distclean-generic distclean-hdr \
	distclean-libtool distclean-recursive distclean-tags distdir \
	dvi dvi-am dvi-recursive info info-am info-recursive install \
	install-am install-data install-data-am install-data-recursive \
	install-exec install-exec-am install-exec-recursive \
	install-includeHEADERS install-info install-info-am \
	install-info-recursive install-man install-recursive \
	install-strip installcheck installcheck-am installdirs \
	installdirs-am installdirs-recursive maintainer-clean \
	maintainer-clean-generic maintainer-clean-recursive mostlyclean \
	mostlyclean-generic mostlyclean-libtool mostlyclean-recursive \
	tags tags-recursive uninstall uninstall-am \
	uninstall-includeHEADERS uninstall-info-am \
	uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: