TTY::Spinner

A terminal spinner for tasks that have non-deterministic time frame.

TTY::Spinner provides independent spinner component for TTY toolkit.

Installation

Add this line to your application's Gemfile:

gem "tty-spinner"

And then execute:

$ bundle

Or install it yourself as:

$ gem install tty-spinner

1. Usage

TTY::Spinner by default uses :classic type of formatter and requires no parameters:

spinner = TTY::Spinner.new

In addition you can provide a message with :spinner token and format type you would like for the spinning display:

spinner = TTY::Spinner.new("[:spinner] Loading ...", format: :pulse_2)

spinner.auto_spin # Automatic animation with default interval

sleep(2) # Perform task

spinner.stop("Done!") # Stop animation

This would produce animation in your terminal:

⎺ Loading ...

And when finished output:

_ Loading ... Done!

Use TTY::Spinner::Multi to synchronize multiple spinners:

spinners = TTY::Spinner::Multi.new("[:spinner] top")

sp1 = spinners.register "[:spinner] one"
# or sp1 = ::TTY::Spinner.new("[:spinner] one")
# spinners.register sp1
sp2 = spinners.register "[:spinner] two"

sp1.auto_spin
sp2.auto_spin

sleep(2) # Perform work

sp1.success
sp2.success

The spinners when done will display:

┌ [✔] top
├── [✔] one
└── [✔] two

For more usage examples please see examples directory

2. TTY::Spinner API

2.1 spin

The main workhorse of the spinner is the spin method.

Looping over spin method will animate a given spinner.

loop do
  spinner.spin
end

2.2 auto_spin

To perform automatic spinning animation use auto_spin method like so:

spinner.auto_spin

The speed with which the spinning happens is determined by the :interval parameter. All the spinner formats have their default intervals specified (see).

2.2.1 pause

After calling auto_spin you can pause spinner execution:

spinner.pause

2.2.2 resume

You can continue any paused spinner:

spinner.resume

2.3 run

Use run passing a block with a job that will automatically display spinning animation while the block executes and finish animation when the block terminates. The block yields a spinner instance.

spinner.run do |spinner|
  ...
end

Optionally you can provide a stop message to display when animation is finished.

spinner.run("Done!") do |spinner|
  ...
end

2.4 start

In order to set start time or reuse the same spinner after it has stopped, call start method:

spinner.start

2.5 stop

In order to stop the spinner call stop. This will finish drawing the spinning animation and return to new line.

spinner.stop

You can further pass a message to print when animation is finished.

spinner.stop("Done!")

2.5.1 success

Use success call to stop the spinning animation and replace the spinning symbol with check mark character to indicate successful completion.

spinner = TTY::Spinner.new("[:spinner] Task name")
spinner.success("(successful)")

This will produce:

[✔] Task name (successful)

2.5.2 error

Use error call to stop the spinning animation and replace the spinning symbol with cross character to indicate error completion.

spinner = TTY::Spinner.new("[:spinner] Task name")
spinner.error("(error)")

This will produce:

[✖] Task name (error)

2.6 update

Use update call to dynamically change label name(s).

Provide an arbitrary token name(s) in the message string, such as :title

spinner = TTY::Spinner.new("[:spinner] :title")

and then pass token name and value:

spinner.update(title: "Downloading file1")

next start animation:

spinner.run { ... }
# => | Downloading file1

Once animation finishes you can kick start another one with a different name:

spinner.update(title: "Downloading file2")
spinner.run { ... }

2.7 reset

In order to reset the spinner to its initial frame do:

spinner.reset

2.8 join

One way to wait while the spinning animates is to join the thread started with start method:

spinner.join

Optionally you can provide timeout:

spinner.join(0.5)

2.9 tty?

The spinner will not write any output if the output stream is not a TTY. You can check this with:

spinner.tty?

2.10 log

To output log messages to the console above a spinner use the log method:

spinner.log("Print this log message to the console")

3. Configuration

There are number of configuration options that can be provided to customise the behaviour of a spinner.

3.1 :format

Use one of the predefined spinner styles by passing the formatting token :format

spinner = TTY::Spinner.new(format: :pulse_2)

All spinner formats that TTY::Spinner accepts are defined in /lib/tty/spinner/formats.rb

If you wish to see all available formats in action run the formats.rb file in examples folder like so:

bundle exec ruby examples/formats.rb

3.2 :frames

If you wish to use custom formatting use the :frames option with either array or string of characters.

spinner = TTY::Spinner.new(frames: [".", "o", "0", "@", "*"])

3.3 :interval

The :interval option accepts integer representing number of Hz units, for instance, frequency of 10 will mean that the spinning animation will be displayed 10 times per second.

spinner = TTY::Spinner.new(interval: 20) # 20 Hz (20 times per second)

3.4 :hide_cursor

Hides cursor when spinning animation performs. Defaults to false.

spinner = TTY::Spinner.new(hide_cursor: true)

3.5 :clear

After spinner is finished clears its output. Defaults to false.

spinner = TTY::Spinner.new(clear: true)

3.6 :success_mark

To change marker indicating successful completion use the :success_mark option:

spinner = TTY::Spinner.new(success_mark: "+")

3.7 :error_mark

To change marker indicating error completion use the :error_mark option:

spinner = TTY::Spinner.new(error_mark: "x")

3.8 :output

The spinner only outputs to a console and when output is redirected to a file or a pipe it does nothing. This is so, for example, your error logs do not overflow with spinner output.

You can change where console output is streamed with :output option:

spinner = TTY::Spinner.new(output: $stdout)

The output stream defaults to stderr.

4. Events

TTY::Spinner emits :done, :success and :error event types when spinner is stopped.

4.1 done

This event is emitted irrespective of the completion method. In order to listen for this event you need to register callback:

spinner.on(:done) { ... }

4.2 success

This event is fired when success call is made. In order to respond to the event, you need to register callback:

spinner.on(:success) { ... }

4.3 error

This event is fired when error completion is called. In order to respond to the event, you need to register callback:

spinner.on(:error) { ... }

5. TTY::Spinner::Multi API

5.1 register

Create and register a TTY::Spinner under the multispinner

new_spinner = multi_spinner.register("[:spinner] Task 1 name", options)
# or
#   spinner = ::TTY::Spinner.new("[:spinner] one")
#   sp1 = multi_spinner.register(spinner)

If no options are given it will use the options given to the multi_spinner when it was initialized to create the new spinner. If options are passed, they will override any options given to the multi spinner.

5.2 auto_spin

To create a top level spinner that tracks activity of all the registered spinners, the multispinner has to have been given a message on initialization:

multi_spinner = TTY::Spinner::Multi.new("[:spinner] Top level spinner")

The top level multi spinner will perform spinning animation automatically when at least one of the registered spinners starts spinning.

If you register spinners without any tasks then you will have to manually control when the multi_spinner finishes by calling stop, success or error (see manual).

Alternatively, you can register spinners with tasks that will automatically animate and finish spinners when respective tasks are done (see async tasks).

The speed with which the spinning happens is determined by the :interval parameter. All the spinner formats have their default intervals specified (see).

5.2.1 manual async

In case when you wish to have full control over multiple spinners, you will need to perform all actions manually.

For example, create a multi spinner that will track status of all registered spinners:

multi_spinner = TTY::Spinner::Multi.new("[:spinner] top")

and then register spinners with their formats:

spinner_1 = spinners.register "[:spinner] one"
spinner_2 = spinners.register "[:spinner] two"

Once registered, you can set spinners running in separate threads:

spinner_1.auto_spin
spinner_2.auto_spin

Finally, you need to stop each spinner manually, in our case we mark the second spinner as failure which in turn will stop the top level multi spinner automatically and mark it as failure:

spinner_1.success
spinner_2.error

The result may look like this:

┌ [✖] top
├── [✔] one
└── [✖] two

5.2.2 auto async tasks

In case when you wish to execute async tasks and update individual spinners automatically, in any order, about their task status use #register and pass additional block parameter with the job to be executed.

For example, create a multi spinner that will track status of all registered spinners:

multi_spinner = TTY::Spinner::Multi.new("[:spinner] top")

and then register spinners with their respective tasks:

multi_spinner.register("[:spinner] one") { |sp| sleep(2); sp.success("yes 2") }
multi_spinner.register("[:spinner] two") { |sp| sleep(3); sp.error("no 2") }

Finally, call #auto_spin to kick things off:

multi_spinner.auto_spin

If any of the child spinner stops with error then the top level spinner will be marked as failure.

5.3 stop

In order to stop the multi spinner call stop. This will stop the top level spinner, if it exists, and any sub-spinners still spinning.

multi_spinner.stop

5.3.1 success

Use success call to stop the spinning animation and replace the spinning symbol with a check mark character to indicate successful completion. This will also call #success on any sub-spinners that are still spinning.

multi_spinner.success

5.3.2 error

Use error call to stop the spinning animation and replace the spinning symbol with cross character to indicate error completion. This will also call #error on any sub-spinners that are still spinning.

multi_spinner.error

5.4 :style

In addition to all configuration options you can style multi spinner like so:

multi_spinner = TTY::Spinner::Multi.new("[:spinner] parent", style: {
  top: ". "
  middle: "|-> "
  bottom: "|__ "
})

Contributing

Bug reports and pull requests are welcome on GitHub at https://github.com/piotrmurach/tty-spinner. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the code of conduct.

Fork it ( https://github.com/piotrmurach/tty-spinner/fork )
Create your feature branch (git checkout -b my-new-feature)
Commit your changes (git commit -am 'Add some feature')
Push to the branch (git push origin my-new-feature)
Create a new Pull Request

Code of Conduct

Everyone interacting in the TTY::Spinner project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the code of conduct.

Files

README.md

Latest commit

History