Octolapse fails to find Retraction Speed,Deretraction Speed

[chrisalbertson]

Using Cura 4.13.0. It seems that Octolapse is looking for setting in the g-code file that are not there. Here is the log file line

022-01-16 20:32:54,507 - octolapse.__init__ - ERROR - Your printer profile is missing some required slicer settings. Either enter the settings in your printer profile, or switch to 'automatic' slicer settings. Missing Settings: Retraction Speed,Deretraction Speed.

I followed instructions and copy/pasted script into Cura g-code so now the g-code files contains there lines.. Perhaps the instructions are no longer current with now Cura version?

Retraction speed is clearly in the file, it's value is 25

M82 ;absolute extrusion mode
; Script based on an original created by tjjfvi (https://github.com/tjjfvi)
; An up-to-date version of the tjjfvi's original script can be found
; here:  https://csi.t6.fyi/
; Note - This script will only work in Cura V4.2 and above!
; --- Global Settings
; layer_height = 0.1
; smooth_spiralized_contours = True
; magic_mesh_surface_mode = normal
; machine_extruder_count = 1
; --- Single Extruder Settings
; speed_z_hop = 5
; retraction_amount = 6.5
; retraction_hop = 1
; retraction_hop_enabled = False
; retraction_enable = True
; retraction_speed = 25
; retraction_retract_speed = 25
; retraction_prime_speed = 25
; speed_travel = 187.5
G28 ;Home