platformio.ini

#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
#
# https://docs.platformio.org/en/latest/projectconf/index.html
#

# Automatic targets - enable auto-uploading
#targets = upload

#
# By default platformio build will abort after 5 errors.
# Remove '-fmax-errors=5' from build_flags below to see all.
#

[platformio]
src_dir      = Marlin
boards_dir   = buildroot/share/PlatformIO/boards
default_envs = FYSETC_S6_8000
include_dir  = Marlin

#
# The 'common' values are used for most Marlin builds
#
[common]
default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
  -<src/lcd/HD44780> -<src/lcd/TFTGLCD> -<src/lcd/dwin> -<src/lcd/dogm> -<src/lcd/tft> -<src/lcd/tft_io>
  -<src/HAL/STM32/tft> -<src/HAL/STM32F1/tft>
  -<src/lcd/menu>
  -<src/lcd/menu/game/game.cpp> -<src/lcd/menu/game/brickout.cpp> -<src/lcd/menu/game/invaders.cpp>
  -<src/lcd/menu/game/maze.cpp> -<src/lcd/menu/game/snake.cpp>
  -<src/lcd/menu/menu_backlash.cpp>
  -<src/lcd/menu/menu_bed_corners.cpp>
  -<src/lcd/menu/menu_bed_leveling.cpp>
  -<src/lcd/menu/menu_cancelobject.cpp>
  -<src/lcd/menu/menu_delta_calibrate.cpp>
  -<src/lcd/menu/menu_filament.cpp>
  -<src/lcd/menu/menu_info.cpp>
  -<src/lcd/menu/menu_job_recovery.cpp>
  -<src/lcd/menu/menu_led.cpp>
  -<src/lcd/menu/menu_media.cpp>
  -<src/lcd/menu/menu_mmu2.cpp>
  -<src/lcd/menu/menu_password.cpp>
  -<src/lcd/menu/menu_power_monitor.cpp>
  -<src/lcd/menu/menu_spindle_laser.cpp>
  -<src/lcd/menu/menu_temperature.cpp>
  -<src/lcd/menu/menu_tmc.cpp>
  -<src/lcd/menu/menu_touch_screen.cpp>
  -<src/lcd/menu/menu_ubl.cpp>
  -<src/lcd/extui/lib/mks_ui>
  -<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
  -<src/lcd/extui/example.cpp>
  -<src/lcd/extui/malyan_lcd.cpp>
  -<src/lcd/extui/lib/ftdi_eve_touch_ui>
  -<src/lcd/extui/anycubic_chiron_lcd.cpp> -<src/lcd/extui/lib/anycubic_chiron>
  -<src/lcd/extui/anycubic_i3mega_lcd.cpp> -<src/lcd/extui/lib/anycubic_i3mega>
  -<src/lcd/lcdprint.cpp>
  -<src/lcd/touch/touch_buttons.cpp>
  -<src/sd/usb_flashdrive>
  -<src/HAL/shared/backtrace>
  -<src/feature/babystep.cpp>
  -<src/feature/backlash.cpp>
  -<src/feature/baricuda.cpp> -<src/gcode/feature/baricuda>
  -<src/feature/bedlevel/abl> -<src/gcode/bedlevel/abl>
  -<src/feature/bedlevel/mbl> -<src/gcode/bedlevel/mbl>
  -<src/feature/bedlevel/ubl> -<src/gcode/bedlevel/ubl>
  -<src/feature/binary_stream.cpp> -<src/libs/heatshrink>
  -<src/feature/bltouch.cpp>
  -<src/feature/cancel_object.cpp> -<src/gcode/feature/cancel>
  -<src/feature/caselight.cpp> -<src/gcode/feature/caselight>
  -<src/feature/closedloop.cpp>
  -<src/feature/controllerfan.cpp> -<src/gcode/feature/controllerfan>
  -<src/feature/dac> -<src/feature/digipot>
  -<src/feature/direct_stepping.cpp> -<src/gcode/motion/G6.cpp>
  -<src/feature/e_parser.cpp>
  -<src/feature/encoder_i2c.cpp>
  -<src/feature/fanmux.cpp>
  -<src/feature/filwidth.cpp> -<src/gcode/feature/filwidth>
  -<src/feature/fwretract.cpp> -<src/gcode/feature/fwretract>
  -<src/feature/host_actions.cpp>
  -<src/feature/hotend_idle.cpp>
  -<src/feature/joystick.cpp>
  -<src/feature/leds/blinkm.cpp>
  -<src/feature/leds/leds.cpp>
  -<src/feature/leds/neopixel.cpp>
  -<src/feature/leds/pca9533.cpp>
  -<src/feature/leds/pca9632.cpp>
  -<src/feature/leds/printer_event_leds.cpp>
  -<src/feature/leds/tempstat.cpp>
  -<src/feature/max7219.cpp>
  -<src/feature/mixing.cpp>
  -<src/feature/mmu2> -<src/gcode/feature/prusa_MMU2>
  -<src/feature/password> -<src/gcode/feature/password>
  -<src/feature/pause.cpp>
  -<src/feature/power.cpp>
  -<src/feature/power_monitor.cpp> -<src/gcode/feature/power_monitor>
  -<src/feature/powerloss.cpp> -<src/gcode/feature/powerloss>
  -<src/feature/probe_temp_comp.cpp>
  -<src/feature/runout.cpp> -<src/gcode/feature/runout>
  -<src/feature/snmm.cpp>
  -<src/feature/solenoid.cpp> -<src/gcode/control/M380_M381.cpp>
  -<src/feature/spindle_laser.cpp> -<src/gcode/control/M3-M5.cpp>
  -<src/feature/tmc_util.cpp> -<src/module/stepper/trinamic.cpp>
  -<src/feature/twibus.cpp>
  -<src/feature/z_stepper_align.cpp>
  -<src/gcode/bedlevel/G26.cpp>
  -<src/gcode/bedlevel/G35.cpp>
  -<src/gcode/bedlevel/G42.cpp>
  -<src/gcode/bedlevel/M420.cpp>
  -<src/gcode/calibrate/G33.cpp>
  -<src/gcode/calibrate/G34.cpp>
  -<src/gcode/calibrate/G34_M422.cpp>
  -<src/gcode/calibrate/G76_M192_M871.cpp>
  -<src/gcode/calibrate/G425.cpp>
  -<src/gcode/calibrate/M12.cpp>
  -<src/gcode/calibrate/M48.cpp>
  -<src/gcode/calibrate/M100.cpp>
  -<src/gcode/calibrate/M425.cpp>
  -<src/gcode/calibrate/M666.cpp>
  -<src/gcode/calibrate/M852.cpp>
  -<src/gcode/control/M42.cpp> -<src/gcode/control/M226.cpp>
  -<src/gcode/config/M43.cpp>
  -<src/gcode/config/M217.cpp>
  -<src/gcode/config/M218.cpp>
  -<src/gcode/config/M221.cpp>
  -<src/gcode/config/M281.cpp>
  -<src/gcode/config/M301.cpp>
  -<src/gcode/config/M302.cpp>
  -<src/gcode/config/M304.cpp>
  -<src/gcode/config/M305.cpp>
  -<src/gcode/config/M540.cpp>
  -<src/gcode/config/M575.cpp>
  -<src/gcode/config/M672.cpp>
  -<src/gcode/control/M7-M9.cpp>
  -<src/gcode/control/M211.cpp>
  -<src/gcode/control/M605.cpp>
  -<src/gcode/feature/advance>
  -<src/gcode/feature/camera>
  -<src/gcode/feature/i2c>
  -<src/gcode/feature/L6470>
  -<src/gcode/feature/leds/M150.cpp>
  -<src/gcode/feature/leds/M7219.cpp>
  -<src/gcode/feature/macro>
  -<src/gcode/feature/mixing/M163-M165.cpp>
  -<src/gcode/feature/mixing/M166.cpp>
  -<src/gcode/feature/pause/G27.cpp>
  -<src/gcode/feature/pause/G60.cpp>
  -<src/gcode/feature/pause/G61.cpp>
  -<src/gcode/feature/pause/M125.cpp>
  -<src/gcode/feature/pause/M600.cpp>
  -<src/gcode/feature/pause/M603.cpp>
  -<src/gcode/feature/pause/M701_M702.cpp>
  -<src/gcode/feature/trinamic/M122.cpp>
  -<src/gcode/feature/trinamic/M569.cpp>
  -<src/gcode/feature/trinamic/M906.cpp>
  -<src/gcode/feature/trinamic/M911-M914.cpp>
  -<src/gcode/geometry/G17-G19.cpp>
  -<src/gcode/geometry/G53-G59.cpp>
  -<src/gcode/geometry/M206_M428.cpp>
  -<src/gcode/host/M16.cpp>
  -<src/gcode/host/M113.cpp>
  -<src/gcode/host/M360.cpp>
  -<src/gcode/host/M876.cpp>
  -<src/gcode/lcd/M0_M1.cpp>
  -<src/gcode/lcd/M250.cpp>
  -<src/gcode/lcd/M73.cpp>
  -<src/gcode/lcd/M995.cpp>
  -<src/gcode/motion/G2_G3.cpp>
  -<src/gcode/motion/G5.cpp>
  -<src/gcode/motion/G80.cpp>
  -<src/gcode/motion/M290.cpp>
  -<src/gcode/probe/G30.cpp>
  -<src/gcode/probe/G31_G32.cpp>
  -<src/gcode/probe/G38.cpp>
  -<src/gcode/probe/M401_M402.cpp>
  -<src/gcode/probe/M851.cpp>
  -<src/gcode/probe/M951.cpp>
  -<src/gcode/scara>
  -<src/gcode/sd>
  -<src/gcode/temp/M104_M109.cpp>
  -<src/gcode/temp/M155.cpp>
  -<src/gcode/units/G20_G21.cpp>
  -<src/gcode/units/M149.cpp>
  -<src/libs/BL24CXX.cpp> -<src/libs/W25Qxx.cpp>
  -<src/libs/L64XX> -<src/module/stepper/L64xx.cpp>
  -<src/libs/hex_print.cpp>
  -<src/libs/least_squares_fit.cpp>
  -<src/libs/nozzle.cpp> -<src/gcode/feature/clean>
  -<src/module/delta.cpp>
  -<src/module/planner_bezier.cpp>
  -<src/module/printcounter.cpp>
  -<src/module/probe.cpp>
  -<src/module/scara.cpp> -<src/gcode/calibrate/M665.cpp>
  -<src/module/stepper/TMC26X.cpp>
extra_scripts      =
  pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  pre:buildroot/share/PlatformIO/scripts/common-cxxflags.py
  post:buildroot/share/PlatformIO/scripts/common-dependencies-post.py
build_flags        = -fmax-errors=5 -g -D__MARLIN_FIRMWARE__ -fmerge-all-constants
lib_deps           =

#
# Feature Dependencies
#
[features]
HAS_TFT_LVGL_UI         = lvgl=https://github.com/makerbase-mks/LVGL-6.1.1-MKS/archive/master.zip
                          src_filter=+<src/lcd/extui/lib/mks_ui>
                          extra_scripts=download_mks_assets.py
HAS_TRINAMIC_CONFIG     = TMCStepper@~0.7.1
                          src_filter=+<src/feature/tmc_util.cpp> +<src/module/stepper/trinamic.cpp> +<src/gcode/feature/trinamic/M122.cpp> +<src/gcode/feature/trinamic/M906.cpp> +<src/gcode/feature/trinamic/M911-M914.cpp>
HAS_STEALTHCHOP         = src_filter=+<src/gcode/feature/trinamic/M569.cpp>
SR_LCD_3W_NL            = SailfishLCD=https://github.com/mikeshub/SailfishLCD/archive/master.zip
HAS_MOTOR_CURRENT_I2C   = SlowSoftI2CMaster
                          src_filter=+<src/feature/digipot>
HAS_TMC26X              = TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
                          src_filter=+<src/module/TMC26X.cpp>
HAS_L64XX               = Arduino-L6470@0.8.0
                          src_filter=+<src/libs/L64XX> +<src/module/stepper/L64xx.cpp> +<src/gcode/feature/L6470>
NEOPIXEL_LED            = Adafruit NeoPixel@1.5.0
                          src_filter=+<src/feature/leds/neopixel.cpp>
MAX6675_IS_MAX31865     = Adafruit MAX31865 library@~1.1.0
USES_LIQUIDCRYSTAL      = LiquidCrystal@1.5.0
USES_LIQUIDTWI2         = LiquidTWI2@1.2.7
HAS_WIRED_LCD           = src_filter=+<src/lcd/lcdprint.cpp>
HAS_MARLINUI_HD44780    = src_filter=+<src/lcd/HD44780>
HAS_MARLINUI_U8GLIB     = U8glib-HAL@~0.4.1
                          src_filter=+<src/lcd/dogm>
HAS_(FSMC|SPI)_TFT      = src_filter=+<src/HAL/STM32/tft> +<src/HAL/STM32F1/tft> +<src/lcd/tft_io>
HAS_FSMC_TFT            = src_filter=+<src/HAL/STM32/tft/tft_fsmc.cpp> +<src/HAL/STM32F1/tft/tft_fsmc.cpp>
HAS_SPI_TFT             = src_filter=+<src/HAL/STM32/tft/tft_spi.cpp> +<src/HAL/STM32F1/tft/tft_spi.cpp>
HAS_GRAPHICAL_TFT       = src_filter=+<src/lcd/tft>
DWIN_CREALITY_LCD       = src_filter=+<src/lcd/dwin>
IS_TFTGLCD_PANEL        = src_filter=+<src/lcd/TFTGLCD>
HAS_TOUCH_XPT2046       = src_filter=+<src/lcd/touch/touch_buttons.cpp>
HAS_LCD_MENU            = src_filter=+<src/lcd/menu>
HAS_GAMES               = src_filter=+<src/lcd/menu/game/game.cpp>
MARLIN_BRICKOUT         = src_filter=+<src/lcd/menu/game/brickout.cpp>
MARLIN_INVADERS         = src_filter=+<src/lcd/menu/game/invaders.cpp>
MARLIN_MAZE             = src_filter=+<src/lcd/menu/game/maze.cpp>
MARLIN_SNAKE            = src_filter=+<src/lcd/menu/game/snake.cpp>
HAS_MENU_BACKLASH       = src_filter=+<src/lcd/menu/menu_backlash.cpp>
HAS_MENU_BED_CORNERS    = src_filter=+<src/lcd/menu/menu_bed_corners.cpp>
LCD_BED_LEVELING        = src_filter=+<src/lcd/menu/menu_bed_leveling.cpp>
HAS_MENU_CANCELOBJECT   = src_filter=+<src/lcd/menu/menu_cancelobject.cpp>
HAS_MENU_DELTA_CALIBRATE = src_filter=+<src/lcd/menu/menu_delta_calibrate.cpp>
HAS_MENU_FILAMENT       = src_filter=+<src/lcd/menu/menu_filament.cpp>
LCD_INFO_MENU           = src_filter=+<src/lcd/menu/menu_info.cpp>
HAS_MENU_JOB_RECOVERY   = src_filter=+<src/lcd/menu/menu_job_recovery.cpp>
HAS_MENU_LED            = src_filter=+<src/lcd/menu/menu_led.cpp>
HAS_MENU_MEDIA          = src_filter=+<src/lcd/menu/menu_media.cpp>
HAS_MENU_MIXER          = src_filter=+<src/lcd/menu/menu_mixer.cpp>
HAS_MENU_MMU2           = src_filter=+<src/lcd/menu/menu_mmu2.cpp>
HAS_MENU_PASSWORD       = src_filter=+<src/lcd/menu/menu_password.cpp>
HAS_MENU_POWER_MONITOR  = src_filter=+<src/lcd/menu/menu_power_monitor.cpp>
HAS_MENU_CUTTER         = src_filter=+<src/lcd/menu/menu_spindle_laser.cpp>
HAS_MENU_TEMPERATURE    = src_filter=+<src/lcd/menu/menu_temperature.cpp>
HAS_MENU_TMC            = src_filter=+<src/lcd/menu/menu_tmc.cpp>
HAS_MENU_TOUCH_SCREEN   = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
HAS_MENU_UBL            = src_filter=+<src/lcd/menu/menu_ubl.cpp>
ANYCUBIC_LCD_CHIRON     = src_filter=+<src/lcd/extui/anycubic_chiron_lcd.cpp> +<src/lcd/extui/lib/anycubic_chiron>
ANYCUBIC_LCD_I3MEGA     = src_filter=+<src/lcd/extui/anycubic_i3mega_lcd.cpp> +<src/lcd/extui/lib/anycubic_i3mega>
HAS_DGUS_LCD            = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
TOUCH_UI_FTDI_EVE       = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
EXTUI_EXAMPLE           = src_filter=+<src/lcd/extui/example.cpp>
MALYAN_LCD              = src_filter=+<src/lcd/extui/malyan_lcd.cpp>
USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+<src/gcode/bedlevel/abl>
MESH_BED_LEVELING       = src_filter=+<src/feature/bedlevel/mbl> +<src/gcode/bedlevel/mbl>
AUTO_BED_LEVELING_UBL   = src_filter=+<src/feature/bedlevel/ubl> +<src/gcode/bedlevel/ubl>
BACKLASH_COMPENSATION   = src_filter=+<src/feature/backlash.cpp>
BARICUDA                = src_filter=+<src/feature/baricuda.cpp> +<src/gcode/feature/baricuda>
BINARY_FILE_TRANSFER    = src_filter=+<src/feature/binary_stream.cpp> +<src/libs/heatshrink>
BLTOUCH                 = src_filter=+<src/feature/bltouch.cpp>
CANCEL_OBJECTS          = src_filter=+<src/feature/cancel_object.cpp> +<src/gcode/feature/cancel>
CASE_LIGHT_ENABLE       = src_filter=+<src/feature/caselight.cpp> +<src/gcode/feature/caselight>
EXTERNAL_CLOSED_LOOP_CONTROLLER = src_filter=+<src/feature/closedloop.cpp> +<src/gcode/calibrate/M12.cpp>
USE_CONTROLLER_FAN      = src_filter=+<src/feature/controllerfan.cpp>
HAS_MOTOR_CURRENT_DAC   = src_filter=+<src/feature/dac>
DIRECT_STEPPING         = src_filter=+<src/feature/direct_stepping.cpp> +<src/gcode/motion/G6.cpp>
EMERGENCY_PARSER        = src_filter=+<src/feature/e_parser.cpp> -<src/gcode/control/M108_*.cpp>
I2C_POSITION_ENCODERS   = src_filter=+<src/feature/encoder_i2c.cpp>
IIC_BL24CXX_EEPROM      = src_filter=+<src/libs/BL24CXX.cpp>
HAS_SPI_FLASH           = src_filter=+<src/libs/W25Qxx.cpp>
HAS_FANMUX              = src_filter=+<src/feature/fanmux.cpp>
FILAMENT_WIDTH_SENSOR   = src_filter=+<src/feature/filwidth.cpp> +<src/gcode/feature/filwidth>
FWRETRACT               = src_filter=+<src/feature/fwretract.cpp> +<src/gcode/feature/fwretract>
HOST_ACTION_COMMANDS    = src_filter=+<src/feature/host_actions.cpp>
HOTEND_IDLE_TIMEOUT     = src_filter=+<src/feature/hotend_idle.cpp>
JOYSTICK                = src_filter=+<src/feature/joystick.cpp>
BLINKM                  = src_filter=+<src/feature/leds/blinkm.cpp>
HAS_COLOR_LEDS          = src_filter=+<src/feature/leds/leds.cpp> +<src/gcode/feature/leds/M150.cpp>
PCA9533                 = src_filter=+<src/feature/leds/pca9533.cpp>
PCA9632                 = src_filter=+<src/feature/leds/pca9632.cpp>
PRINTER_EVENT_LEDS      = src_filter=+<src/feature/leds/printer_event_leds.cpp>
TEMP_STAT_LEDS          = src_filter=+<src/feature/leds/tempstat.cpp>
MAX7219_DEBUG           = src_filter=+<src/feature/max7219.cpp> +<src/gcode/feature/leds/M7219.cpp>
MIXING_EXTRUDER         = src_filter=+<src/feature/mixing.cpp> +<src/gcode/feature/mixing/M163-M165.cpp>
PRUSA_MMU2              = src_filter=+<src/feature/mmu2> +<src/gcode/feature/prusa_MMU2>
PASSWORD_FEATURE        = src_filter=+<src/feature/password> +<src/gcode/feature/password>
ADVANCED_PAUSE_FEATURE  = src_filter=+<src/feature/pause.cpp> +<src/gcode/feature/pause/M600.cpp> +<src/gcode/feature/pause/M603.cpp>
AUTO_POWER_CONTROL      = src_filter=+<src/feature/power.cpp>
HAS_POWER_MONITOR       = src_filter=+<src/feature/power_monitor.cpp> +<src/gcode/feature/power_monitor>
POWER_LOSS_RECOVERY     = src_filter=+<src/feature/powerloss.cpp> +<src/gcode/feature/powerloss>
PROBE_TEMP_COMPENSATION = src_filter=+<src/feature/probe_temp_comp.cpp> +<src/gcode/calibrate/G76_M192_M871.cpp>
HAS_FILAMENT_SENSOR     = src_filter=+<src/feature/runout.cpp> +<src/gcode/feature/runout>
MK2_MULTIPLEXER         = src_filter=+<src/feature/snmm.cpp>
EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp> +<src/gcode/control/M380_M381.cpp>
HAS_CUTTER              = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
EXPERIMENTAL_I2CBUS     = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
MECHANICAL_GANTRY_CAL.+ = src_filter=+<src/gcode/calibrate/G34.cpp>
Z_STEPPER_AUTO_ALIGN    = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
G26_MESH_VALIDATION     = src_filter=+<src/gcode/bedlevel/G26.cpp>
ASSISTED_TRAMMING       = src_filter=+<src/gcode/bedlevel/G35.cpp>
HAS_MESH                = src_filter=+<src/gcode/bedlevel/G42.cpp>
HAS_LEVELING            = src_filter=+<src/gcode/bedlevel/M420.cpp>
DELTA_AUTO_CALIBRATION  = src_filter=+<src/gcode/calibrate/G33.cpp>
CALIBRATION_GCODE       = src_filter=+<src/gcode/calibrate/G425.cpp>
Z_MIN_PROBE_REPEATABILITY_TEST = src_filter=+<src/gcode/calibrate/M48.cpp>
M100_FREE_MEMORY_WATCHER = src_filter=+<src/gcode/calibrate/M100.cpp>
BACKLASH_GCODE          = src_filter=+<src/gcode/calibrate/M425.cpp>
IS_KINEMATIC            = src_filter=+<src/gcode/calibrate/M665.cpp>
HAS_EXTRA_ENDSTOPS      = src_filter=+<src/gcode/calibrate/M666.cpp>
SKEW_CORRECTION_GCODE   = src_filter=+<src/gcode/calibrate/M852.cpp>
DIRECT_PIN_CONTROL      = src_filter=+<src/gcode/control/M42.cpp> +<src/gcode/control/M226.cpp>
PINS_DEBUGGING          = src_filter=+<src/gcode/config/M43.cpp>
NO_VOLUMETRICS          = src_filter=-<src/gcode/config/M200-M205.cpp>
HAS_MULTI_EXTRUDER      = src_filter=+<src/gcode/config/M217.cpp>
HAS_HOTEND_OFFSET       = src_filter=+<src/gcode/config/M218.cpp>
EDITABLE_SERVO_ANGLES   = src_filter=+<src/gcode/config/M281.cpp>
PIDTEMP                 = src_filter=+<src/gcode/config/M301.cpp>
PREVENT_COLD_EXTRUSION  = src_filter=+<src/gcode/config/M302.cpp>
PIDTEMPBED              = src_filter=+<src/gcode/config/M304.cpp>
HAS_USER_THERMISTORS    = src_filter=+<src/gcode/config/M305.cpp>
SD_ABORT_ON_ENDSTOP_HIT = src_filter=+<src/gcode/config/M540.cpp>
BAUD_RATE_GCODE         = src_filter=+<src/gcode/config/M575.cpp>
HAS_SMART_EFF_MOD       = src_filter=+<src/gcode/config/M672.cpp>
COOLANT_CONTROL         = src_filter=+<src/gcode/control/M7-M9.cpp>
HAS_SOFTWARE_ENDSTOPS   = src_filter=+<src/gcode/control/M211.cpp>
HAS_DUPLICATION_MODE    = src_filter=+<src/gcode/control/M605.cpp>
LIN_ADVANCE             = src_filter=+<src/gcode/feature/advance>
PHOTO_GCODE             = src_filter=+<src/gcode/feature/camera>
CONTROLLER_FAN_EDITABLE = src_filter=+<src/gcode/feature/controllerfan>
GCODE_MACROS            = src_filter=+<src/gcode/feature/macro>
GRADIENT_MIX            = src_filter=+<src/gcode/feature/mixing/M166.cpp>
HAS_SAVED_POSITIONS     = src_filter=+<src/gcode/feature/pause/G60.cpp> +<src/gcode/feature/pause/G61.cpp>
PARK_HEAD_ON_PAUSE      = src_filter=+<src/gcode/feature/pause/M125.cpp>
FILAMENT_LOAD_UNLOAD_GCODES = src_filter=+<src/gcode/feature/pause/M701_M702.cpp>
CNC_WORKSPACE_PLANES    = src_filter=+<src/gcode/geometry/G17-G19.cpp>
CNC_COORDINATE_SYSTEMS  = src_filter=+<src/gcode/geometry/G53-G59.cpp>
HAS_M206_COMMAND        = src_filter=+<src/gcode/geometry/M206_M428.cpp>
EXPECTED_PRINTER_CHECK  = src_filter=+<src/gcode/host/M16.cpp>
HOST_KEEPALIVE_FEATURE  = src_filter=+<src/gcode/host/M113.cpp>
REPETIER_GCODE_M360     = src_filter=+<src/gcode/host/M360.cpp>
HAS_GCODE_M876          = src_filter=+<src/gcode/host/M876.cpp>
HAS_RESUME_CONTINUE     = src_filter=+<src/gcode/lcd/M0_M1.cpp>
HAS_LCD_CONTRAST        = src_filter=+<src/gcode/lcd/M250.cpp>
LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>
ARC_SUPPORT             = src_filter=+<src/gcode/motion/G2_G3.cpp>
GCODE_MOTION_MODES      = src_filter=+<src/gcode/motion/G80.cpp>
BABYSTEPPING            = src_filter=+<src/gcode/motion/M290.cpp> +<src/feature/babystep.cpp>
Z_PROBE_SLED            = src_filter=+<src/gcode/probe/G31_G32.cpp>
G38_PROBE_TARGET        = src_filter=+<src/gcode/probe/G38.cpp>
MAGNETIC_PARKING_EXTRUDER = src_filter=+<src/gcode/probe/M951.cpp>
SDSUPPORT               = src_filter=+<src/gcode/sd>
HAS_EXTRUDERS           = src_filter=+<src/gcode/temp/M104_M109.cpp> +<src/gcode/config/M221.cpp>
AUTO_REPORT_TEMPERATURES = src_filter=+<src/gcode/temp/M155.cpp>
INCH_MODE_SUPPORT       = src_filter=+<src/gcode/units/G20_G21.cpp>
TEMPERATURE_UNITS_SUPPORT = src_filter=+<src/gcode/units/M149.cpp>
NEED_HEX_PRINT          = src_filter=+<src/libs/hex_print.cpp>
NEED_LSF                = src_filter=+<src/libs/least_squares_fit.cpp>
NOZZLE_PARK_FEATURE     = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/pause/G27.cpp>
NOZZLE_CLEAN_FEATURE    = src_filter=+<src/libs/nozzle.cpp> +<src/gcode/feature/clean>
DELTA                   = src_filter=+<src/module/delta.cpp> +<src/gcode/calibrate/M666.cpp>
BEZIER_CURVE_SUPPORT    = src_filter=+<src/module/planner_bezier.cpp> +<src/gcode/motion/G5.cpp>
PRINTCOUNTER            = src_filter=+<src/module/printcounter.cpp>
HAS_BED_PROBE           = src_filter=+<src/module/probe.cpp> +<src/gcode/probe/G30.cpp> +<src/gcode/probe/M401_M402.cpp> +<src/gcode/probe/M851.cpp>
IS_SCARA                = src_filter=+<src/module/scara.cpp>
MORGAN_SCARA            = src_filter=+<src/gcode/scara>
(ESP3D_)?WIFISUPPORT    = AsyncTCP, ESP Async WebServer
  ESP3DLib=https://github.com/luc-github/ESP3DLib.git
  arduinoWebSockets=https://github.com/Links2004/arduinoWebSockets.git
  ESP32SSDP=https://github.com/luc-github/ESP32SSDP.git
  lib_ignore=ESPAsyncTCP

#
# Default values apply to all 'env:' prefixed environments
#
[env]
framework     = arduino
extra_scripts = ${common.extra_scripts}
build_flags   = ${common.build_flags}
lib_deps      = ${common.lib_deps}
monitor_speed = 250000
monitor_flags =
  --quiet
  --echo
  --eol
    LF
  --filter
    colorize
  --filter
    time

#################################
#                               #
#   Unique Core Architectures   #
#                               #
#  Add a new "env" below if no  #
# entry has values suitable to  #
#   build for a given board.    #
#                               #
#################################

#################################
#                               #
#       AVR Architecture        #
#                               #
#################################

#
# AVR (8-bit) Common Environment values
#
[common_avr8]
board_build.f_cpu = 16000000L
src_filter        = ${common.default_src_filter} +<src/HAL/AVR>

#
# ATmega2560
#
[env:mega2560]
platform            = atmelavr
extends             = common_avr8
board               = megaatmega2560

#
# ATmega2560 with extended pins 70-85 defined
# BOARD_BQ_ZUM_MEGA_3D
# BOARD_ULTIMAIN_2
# BOARD_MIGHTYBOARD_REVE
# BOARD_EINSTART_S
#
[env:mega2560ext]
platform            = atmelavr
extends             = env:mega2560
board               = megaatmega2560
board_build.variant = megaextendedpins
extra_scripts       = ${common.extra_scripts}
                      pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py

#
# ATmega1280
#
[env:mega1280]
platform      = atmelavr
extends       = common_avr8
board         = megaatmega1280

#
# MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
#
[env:MightyBoard1280]
platform      = atmelavr
extends       = common_avr8
board         = ATmega1280
upload_speed  = 57600

#
# MightyBoard ATmega2560 (MegaCore 100 pin boards variants)
#
[env:MightyBoard2560]
platform      = atmelavr
extends       = common_avr8
board         = ATmega2560
upload_protocol = wiring
upload_speed  = 57600
board_upload.maximum_size = 253952

#
# RAMBo
#
[env:rambo]
platform      = atmelavr
extends       = common_avr8
board         = reprap_rambo

#
# FYSETC F6 V1.3
#
[env:FYSETC_F6_13]
platform      = atmelavr
extends       = common_avr8
board         = fysetc_f6_13

#
# FYSETC F6 V1.4
#
[env:FYSETC_F6_14]
platform      = atmelavr
extends       = common_avr8
board         = fysetc_f6_14

#
# Sanguinololu (ATmega644p)
#
[env:sanguino644p]
platform      = atmelavr
extends       = common_avr8
board         = sanguino_atmega644p

#
# Sanguinololu (ATmega1284p)
#
[env:sanguino1284p]
platform      = atmelavr
extends       = common_avr8
board         = sanguino_atmega1284p
board_upload.maximum_size = 126976

#
# Melzi and clones (ATmega1284p)
#
[env:melzi]
platform      = atmelavr
extends       = common_avr8
board         = sanguino_atmega1284p
upload_speed  = 57600
board_upload.maximum_size = 126976

#
# Melzi and clones (Optiboot bootloader)
#
[env:melzi_optiboot]
platform      = atmelavr
extends       = common_avr8
board         = sanguino_atmega1284p
upload_speed  = 115200

#
# Melzi and clones (Zonestar Melzi2 with tuned flags)
#
[env:melzi_optimized]
platform      = atmelavr
extends       = env:melzi_optiboot
build_flags   = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues
build_unflags = -g -ggdb

#
# AT90USB1286 boards using CDC bootloader
# - BRAINWAVE
# - BRAINWAVE_PRO
# - SAV_MKI
# - TEENSYLU
#
[env:at90usb1286_cdc]
platform      = teensy
extends       = common_avr8
board         = at90usb1286
lib_ignore    = ${env:common_avr8.lib_ignore} Teensy_ADC

#
# AT90USB1286 boards using DFU bootloader
# - PrintrBoard
# - PrintrBoard Rev.F
# - ? 5DPRINT ?
#
[env:at90usb1286_dfu]
platform      = teensy
extends       = env:at90usb1286_cdc

#################################
#                               #
#       DUE Architecture        #
#                               #
#################################

#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
#  - RAMPS4DUE
#  - RADDS
#
[env:DUE]
platform      = atmelsam
board         = due
src_filter    = ${common.default_src_filter} +<src/HAL/DUE> +<src/HAL/shared/backtrace>

[env:DUE_USB]
platform      = atmelsam
extends       = env:DUE
board         = dueUSB

[env:DUE_debug]
# Used when WATCHDOG_RESET_MANUAL is enabled
platform      = atmelsam
extends       = env:DUE
build_flags   = ${common.build_flags}
  -funwind-tables
  -mpoke-function-name

#
# Archim SAM
#
[common_DUE_archim]
platform      = atmelsam
extends       = env:DUE
board         = archim
build_flags   = ${common.build_flags}
  -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSBCON
board_build.variants_dir = buildroot/share/PlatformIO/variants/
extra_scripts = ${common.extra_scripts}
  Marlin/src/HAL/DUE/upload_extra_script.py

[env:DUE_archim]
platform      = ${common_DUE_archim.platform}
extends       = common_DUE_archim

# Used when WATCHDOG_RESET_MANUAL is enabled
[env:DUE_archim_debug]
platform      = ${common_DUE_archim.platform}
extends       = common_DUE_archim
build_flags   = ${common_DUE_archim.build_flags} -funwind-tables -mpoke-function-name

#################################
#                               #
#      SAMD51 Architecture      #
#                               #
#################################

#
# Adafruit Grand Central M4 (Atmel SAMD51P20A ARM Cortex-M4)
#
[env:SAMD51_grandcentral_m4]
platform       = atmelsam
board          = adafruit_grandcentral_m4
build_flags    = ${common.build_flags} -std=gnu++17
build_unflags  = -std=gnu++11
src_filter     = ${common.default_src_filter} +<src/HAL/SAMD51>
lib_deps       = ${common.lib_deps}
  SoftwareSerialM
  Adafruit SPIFlash
custom_marlin.SDSUPPORT = SdFat - Adafruit Fork
debug_tool     = jlink

#################################
#                               #
#     LPC176x Architecture      #
#                               #
#################################

#
# NXP LPC176x ARM Cortex-M3
#
[common_LPC]
platform          = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip
platform_packages = framework-arduino-lpc176x@^0.2.5
board             = nxp_lpc1768
lib_ldf_mode      = off
lib_compat_mode   = strict
extra_scripts     = ${common.extra_scripts}
  Marlin/src/HAL/LPC1768/upload_extra_script.py
src_filter        = ${common.default_src_filter} +<src/HAL/LPC1768> +<src/HAL/shared/backtrace>
lib_deps          = ${common.lib_deps}
  Servo
custom_marlin.USES_LIQUIDCRYSTAL = LiquidCrystal@1.0.0
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/p3p/Adafruit_NeoPixel/archive/1.5.0.zip
build_flags       = ${common.build_flags} -DU8G_HAL_LINKS -IMarlin/src/HAL/LPC1768/include -IMarlin/src/HAL/LPC1768/u8g
  # debug options for backtrace
  #-funwind-tables
  #-mpoke-function-name

#
# NXP LPC176x ARM Cortex-M3
#
[env:LPC1768]
platform  = ${common_LPC.platform}
extends   = common_LPC
board     = nxp_lpc1768

[env:LPC1769]
platform  = ${common_LPC.platform}
extends   = common_LPC
board     = nxp_lpc1769

#################################
#                               #
#      STM32 Architecture       #
#                               #
#################################

#
# HAL/STM32 Base Environment values
#
[common_stm32]
platform      = ststm32@~8.0
build_flags   = ${common.build_flags}
  -std=gnu++14
  -DUSBCON -DUSBD_USE_CDC
  -DTIM_IRQ_PRIO=13
build_unflags = -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/STM32> +<src/HAL/shared/backtrace>

#
# HAL/STM32F1 Common Environment values
#
[common_stm32f1]
platform      = ststm32@~6.1
build_flags   = !python Marlin/src/HAL/STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14 -DHAVE_SW_SERIAL
build_unflags = -std=gnu11 -std=gnu++11
src_filter    = ${common.default_src_filter} +<src/HAL/STM32F1>
lib_ignore    = SPI
lib_deps      = ${common.lib_deps}
  SoftwareSerialM

#
# STM32F103RC
#
[env:STM32F103RC]
platform          = ${common_stm32f1.platform}
extends           = common_stm32f1
board             = genericSTM32F103RC
platform_packages = tool-stm32duino
monitor_speed     = 115200

#
# MEEB_3DP (STM32F103RCT6 with 512K)
#
[env:STM32F103RC_meeb]
platform          = ${common_stm32f1.platform}
extends           = common_stm32f1
board             = MEEB_3DP
platform_packages = tool-stm32duino
build_flags       = ${common_stm32f1.build_flags}
                    -DDEBUG_LEVEL=0
                    -DSS_TIMER=4
                    -DSTM32_FLASH_SIZE=512
                    -DHSE_VALUE=12000000U
                    -DUSE_USB_COMPOSITE
                    -DVECT_TAB_OFFSET=0x2000
                    -DGENERIC_BOOTLOADER
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  buildroot/share/PlatformIO/scripts/STM32F103RC_MEEB_3DP.py
lib_deps          = ${common.lib_deps}
  SoftwareSerialM
  USBComposite for STM32F1@0.91
custom_marlin.NEOPIXEL_LED = Adafruit NeoPixel=https://github.com/ccccmagicboy/Adafruit_NeoPixel#meeb_3dp_use
debug_tool        = stlink
upload_protocol   = dfu

#
# STM32F103RC_fysetc
#
[env:STM32F103RC_fysetc]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RC
extra_scripts     = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py
build_flags       = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0
lib_ldf_mode      = chain
debug_tool        = stlink
upload_protocol   = serial

#
# BigTree SKR Mini V1.1 / SKR mini E3 / SKR E3 DIP (STM32F103RCT6 ARM Cortex-M3)
#
#   STM32F103RC_btt ............. RCT6 with 256K
#   STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage)
#   STM32F103RC_btt_512K ........ RCT6 with 512K
#   STM32F103RC_btt_512K_USB .... RCT6 with 512K (USB mass storage)
#
# WARNING! If you have an SKR Mini v1.1 or an SKR Mini E3 1.0 / 1.2 / 2.0 / DIP
# and experience a printer freeze, re-flash Marlin using the regular (non-512K)
# build option. 256K chips may be re-branded 512K chips, but this means the
# upper 256K is sketchy, and failure is very likely.
#

[env:STM32F103RC_btt]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RC
extra_scripts     = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/STM32F103RC_SKR_MINI.py
build_flags       = ${common_stm32f1.build_flags}
  -DDEBUG_LEVEL=0 -DSS_TIMER=4
monitor_speed     = 115200

[env:STM32F103RC_btt_USB]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RC_btt
build_flags       = ${env:STM32F103RC_btt.build_flags} -DUSE_USB_COMPOSITE
lib_deps          = ${env:STM32F103RC_btt.lib_deps}
  USBComposite for STM32F1@0.91

[env:STM32F103RC_btt_512K]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RC_btt
board_upload.maximum_size=524288
build_flags       = ${env:STM32F103RC_btt.build_flags} -DSTM32_FLASH_SIZE=512

[env:STM32F103RC_btt_512K_USB]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RC_btt_512K
build_flags       = ${env:STM32F103RC_btt_512K.build_flags} -DUSE_USB_COMPOSITE
lib_deps          = ${env:STM32F103RC_btt_512K.lib_deps}
  USBComposite for STM32F1@0.91

#
# STM32F103RE
#
[env:STM32F103RE]
platform          = ${common_stm32f1.platform}
extends           = common_stm32f1
board             = genericSTM32F103RE
platform_packages = tool-stm32duino
monitor_speed     = 115200

#
#   STM32F103RE_btt ............. RET6
#   STM32F103RE_btt_USB ......... RET6 (USB mass storage)
#
[env:STM32F103RE_btt]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RE
extra_scripts     = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/STM32F103RE_SKR_E3_DIP.py
build_flags       = ${common_stm32f1.build_flags} -DDEBUG_LEVEL=0 -DSS_TIMER=4
debug_tool        = stlink
upload_protocol   = stlink

[env:STM32F103RE_btt_USB]
platform          = ${common_stm32f1.platform}
extends           = env:STM32F103RE_btt
build_flags       = ${env:STM32F103RE_btt.build_flags} -DUSE_USB_COMPOSITE
lib_deps          = ${common_stm32f1.lib_deps}
  USBComposite for STM32F1@0.91

#
# STM32F4 with STM32GENERIC
#
[env:STM32F4]
platform      = ${common_stm32.platform}
board         = disco_f407vg
build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F4 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
src_filter    = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F7>

#
# STM32F7 with STM32GENERIC
#
[env:STM32F7]
platform      = ${common_stm32.platform}
board         = remram_v1
build_flags   = ${common.build_flags} -DUSE_STM32GENERIC -DSTM32GENERIC -DSTM32F7 -DMENU_USB_SERIAL -DMENU_SERIAL=SerialUSB -DHAL_IWDG_MODULE_ENABLED
src_filter    = ${common.default_src_filter} +<src/HAL/STM32_F4_F7> -<src/HAL/STM32_F4_F7/STM32F4>

#
# ST NUCLEO-F767ZI Development Board
# This environment is for testing purposes prior to control boards
# being readily available based on STM32F7 MCUs
#
[env:NUCLEO_F767ZI]
platform      = ${common_stm32.platform}
extends       = common_stm32
board         = nucleo_f767zi
build_flags   = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9

#
# ARMED (STM32)
#
[env:ARMED]
platform      = ${common_stm32.platform}
extends       = common_stm32
board         = armed_v1
build_flags   = ${common_stm32.build_flags}
  -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing

#
# Geeetech GTM32 (STM32F103VET6)
#
[env:STM32F103VE_GTM32]
platform          = ${common_stm32f1.platform}
extends           = common_stm32f1
board             = genericSTM32F103VE
build_flags       = ${common_stm32f1.build_flags}
  -ffunction-sections -fdata-sections -nostdlib -MMD
  -DMCU_STM32F103VE -DARDUINO_GENERIC_STM32F103V -DARDUINO_ARCH_STM32F1 -DBOARD_generic_stm32f103v
  -DDEBUG_LEVEL=DEBUG_NONE -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DVECT_TAB_ADDR=0x8000000
  -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
upload_protocol   = serial

#
# Longer 3D board in Alfawise U20 (STM32F103VET6)
#
[env:STM32F103VE_longer]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103VE
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py
build_flags   = ${common_stm32f1.build_flags}
  -DMCU_STM32F103VE -DSTM32F1xx -USERIAL_USB -DU20 -DTS_V12
build_unflags = ${common_stm32f1.build_unflags}
  -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG=1 -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6
lib_ignore    = ${common_stm32f1.lib_ignore}

#
# MKS Robin Mini (STM32F103VET6)
#
[env:mks_robin_mini]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103VE
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_mini.py
build_flags   = ${common_stm32f1.build_flags}
  -DMCU_STM32F103VE

#
# MKS Robin Nano (STM32F103VET6)
#
[env:mks_robin_nano35]
platform        = ${common_stm32f1.platform}
extends         = common_stm32f1
board           = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts   = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_nano35.py
build_flags     = ${common_stm32f1.build_flags}
  -DMCU_STM32F103VE -DSS_TIMER=4
debug_tool      = jlink
upload_protocol = jlink

#
# MKS Robin (STM32F103ZET6)
#
[env:mks_robin]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin.py
build_flags   = ${common_stm32f1.build_flags}
  -DSS_TIMER=4 -DSTM32_XL_DENSITY

# MKS Robin (STM32F103ZET6)
# Uses HAL STM32 to support Marlin UI for TFT screen with optional touch panel
#
[env:mks_robin_stm32]
platform             = ${common_stm32.platform}
extends              = common_stm32
board                = genericSTM32F103ZE
board_build.core     = stm32
board_build.variant  = MARLIN_F103Zx
board_build.ldscript = ldscript.ld
board_build.offset   = 0x7000
board_build.firmware = Robin.bin
build_flags          = ${common_stm32.build_flags}
  -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8
build_unflags        = ${common_stm32.build_unflags}
 -DUSBCON -DUSBD_USE_CDC
extra_scripts        = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
  buildroot/share/PlatformIO/scripts/mks_encrypt.py
lib_deps             =

#
# MKS Robin Pro (STM32F103ZET6)
#
[env:mks_robin_pro]
platform      = ${common_stm32f1.platform}
extends       = env:mks_robin
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_pro.py


#
# TRIGORILLA PRO (STM32F103ZET6)
#
[env:trigorilla_pro]
platform      = ${common_stm32f1.platform}
extends       = env:mks_robin
extra_scripts = ${common.extra_scripts}

#
# MKS Robin E3D (STM32F103RCT6) and
# MKS Robin E3 with TMC2209
#
[env:mks_robin_e3]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_e3.py
build_flags   = ${common_stm32f1.build_flags}
  -DDEBUG_LEVEL=0 -DSS_TIMER=4

#
# MKS Robin E3p (STM32F103VET6)
#  - LVGL UI
#
[env:mks_robin_e3p]
platform        = ${common_stm32f1.platform}
extends         = common_stm32f1
board           = genericSTM32F103VE
platform_packages = tool-stm32duino
extra_scripts   = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_e3p.py
build_flags     = ${common_stm32f1.build_flags}
  -DMCU_STM32F103VE -DSS_TIMER=4
debug_tool      = jlink
upload_protocol = jlink

#
# MKS Robin Lite/Lite2 (STM32F103RCT6)
#
[env:mks_robin_lite]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103RC
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_lite.py


#
# MKS ROBIN LITE3 (STM32F103RCT6)
#
[env:mks_robin_lite3]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103RC
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/mks_robin_lite3.py

#
# JGAurora A5S A1 (STM32F103ZET6)
#
[env:jgaurora_a5s_a1]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = genericSTM32F103ZE
extra_scripts = ${common.extra_scripts}
  buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py
build_flags   = ${common_stm32f1.build_flags}
  -DSTM32F1xx -DSTM32_XL_DENSITY

#
# Malyan M200 (STM32F103CB)
#
[env:STM32F103CB_malyan]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = malyanM200
build_flags   = ${common_stm32f1.build_flags}
  -DMCU_STM32F103CB -D__STM32F1__=1 -std=c++1y -DSERIAL_USB -ffunction-sections -fdata-sections
  -Wl,--gc-sections -DDEBUG_LEVEL=0 -D__MARLIN_FIRMWARE__
lib_ignore    = ${common_stm32f1.lib_ignore}
  SoftwareSerialM

#
# Malyan M200 v2 (STM32F070RB)
#
[env:STM32F070RB_malyan]
platform    = ${common_stm32.platform}
extends     = common_stm32
board       = malyanM200v2
build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED
  -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
  -DCUSTOM_STARTUP_FILE

#
# Malyan M200 v2 (STM32F070CB)
#
[env:STM32F070CB_malyan]
platform    = ${common_stm32.platform}
extends     = common_stm32
board       = malyanm200_f070cb
build_flags = ${common_stm32.build_flags}
  -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE

#
# Malyan M300 (STM32F070CB)
#
[env:malyan_M300]
platform    = ${common_stm32.platform}
extends     = common_stm32
board       = malyanm300_f070cb
build_flags = ${common_stm32.build_flags}
  -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED
src_filter  = ${common.default_src_filter} +<src/HAL/STM32>

#
# Chitu boards like Tronxy X5s (STM32F103ZET6)
#
[env:chitu_f103]
platform      = ${common_stm32f1.platform}
extends       = common_stm32f1
board         = CHITU_F103
extra_scripts = pre:buildroot/share/PlatformIO/scripts/common-dependencies.py
  pre:buildroot/share/PlatformIO/scripts/STM32F1_create_variant.py
  buildroot/share/PlatformIO/scripts/chitu_crypt.py
build_flags   = ${common_stm32f1.build_flags}
  -DSTM32F1xx -DSTM32_XL_DENSITY
build_unflags = ${common_stm32f1.build_unflags}
  -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6

#
# Some Chitu V5 boards have a problem with GPIO init.
# Use this target if G28 or G29 are always failing.
#
[env:chitu_v5_gpio_init]
platform      = ${common_stm32f1.platform}
extends       = env:chitu_f103
build_flags   = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX

#
# Creality (STM32F103RET6)
#
[env:STM32F103RET6_creality]
platform        = ${common_stm32f1.platform}
extends         = common_stm32f1
board           = genericSTM32F103RE
build_flags     = !python Marlin/src/HAL/STM32F1/build_flags.py
  ${common.build_flags} -std=gnu++14 -DSTM32_XL_DENSITY -DTEMP_TIMER_CHAN=4
extra_scripts   = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/random-bin.py
  buildroot/share/PlatformIO/scripts/creality.py
lib_ignore      = ${common_stm32f1.lib_ignore}
debug_tool      = jlink
upload_protocol = jlink
monitor_speed   = 115200

#
# STM32F401VE
# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
#
[env:STM32F401VE_STEVAL]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = STEVAL_STM32F401VE
build_flags       = ${common_stm32.build_flags}
  -DARDUINO_STEVAL -DSTM32F401xE
  -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
  buildroot/share/PlatformIO/scripts/STEVAL__F401XX.py

#
# FLYF407ZG
#
[env:FLYF407ZG]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = FLYF407ZG
build_flags       = ${common_stm32.build_flags}
  -DVECT_TAB_OFFSET=0x8000
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py

#
# FLY MINI(stm32f103rct6)
#
[env:FLY_MINI]
platform          = ${common_stm32f1.platform}
extends           = common_stm32f1
board             = genericSTM32F103RC
platform_packages = tool-stm32duino
extra_scripts     = ${common.extra_scripts}
 buildroot/share/PlatformIO/scripts/fly_mini.py
build_flags       = ${common_stm32f1.build_flags}
 -DDEBUG_LEVEL=0 -DSS_TIMER=4

#
# FYSETC S6 (STM32F446VET6 ARM Cortex-M4)
#
[env:FYSETC_S6]
platform          = ${common_stm32.platform}
extends           = common_stm32
platform_packages = tool-stm32duino
board             = fysetc_s6
build_flags       = ${common_stm32.build_flags}
  -DVECT_TAB_OFFSET=0x10000
  -DHAL_PCD_MODULE_ENABLED
extra_scripts     = ${common.extra_scripts}
  #pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
debug_tool        = stlink
upload_protocol   = dfu
upload_command    = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"

#
# FYSETC S6 8000(STM32F446VET6 ARM Cortex-M4)
# This env is for new bootloader, check it here: https://github.com/FYSETC/FYSETC-S6/tree/main/bootloader
#
[env:FYSETC_S6_8000]
platform          = ${common_stm32.platform}
extends           = common_stm32
platform_packages = tool-stm32duino
board             = marlin_fysetc_s6
build_flags       = ${common_stm32.build_flags}
  -DVECT_TAB_OFFSET=0x8000
  -DHAL_PCD_MODULE_ENABLED
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
debug_tool        = stlink
upload_protocol   = dfu
upload_command    = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE"

#
# STM32F407VET6 with RAMPS-like shield
# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
# Shield - https://github.com/jmz52/Hardware
#
[env:STM32F407VE_black]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = blackSTM32F407VET6
build_flags       = ${common_stm32.build_flags}
  -DARDUINO_BLACK_F407VE
  -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py

#
# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
#
[env:BIGTREE_SKR_PRO]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = BigTree_SKR_Pro
build_flags       = ${common_stm32.build_flags}
  -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
#upload_protocol   = stlink
#upload_command    = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
debug_tool        = stlink
debug_init_break  =

#
# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
#
[env:BIGTREE_GTR_V1_0]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = BigTree_GTR_v1
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
build_flags       = ${common_stm32.build_flags}
  -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000

#
# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
#
[env:BIGTREE_BTT002]
platform          = ${common_stm32.platform}
extends           = common_stm32
board             = BigTree_Btt002
build_flags       = ${common_stm32.build_flags}
  -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
  -DHAVE_HWSERIAL2
  -DHAVE_HWSERIAL3
  -DPIN_SERIAL2_RX=PD_6
  -DPIN_SERIAL2_TX=PD_5
extra_scripts     = ${common.extra_scripts}
  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py

#
# Lerdge base
#
[lerdge_common]
platform           = ${common_stm32.platform}
extends            = common_stm32
board              = LERDGE
board_build.offset = 0x10000
extra_scripts      = ${common.extra_scripts}
                     pre:buildroot/share/PlatformIO/scripts/copy_marlin_variant_to_framework.py
                     buildroot/share/PlatformIO/scripts/stm32_bootloader.py
                     buildroot/share/PlatformIO/scripts/lerdge.py
build_flags        = ${common_stm32.build_flags}
  -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
  -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
  -DTRANSFER_CLOCK_DIV=8 -DHAL_SRAM_MODULE_ENABLED
build_unflags      = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483

#
# Lerdge X
#
[env:LERDGEX]
extends              = lerdge_common
board_build.firmware = Lerdge_X_firmware_force.bin

#
# Lerdge S
#
[env:LERDGES]
extends              = lerdge_common
board_build.firmware = Lerdge_firmware_force.bin

#
# Lerdge K
#
[env:LERDGEK]
extends              = lerdge_common
board_build.firmware = Lerdge_K_firmware_force.bin
build_flags          = ${lerdge_common.build_flags}
  -DLERDGEK

#
# RUMBA32
#
[env:rumba32]
platform      = ${common_stm32.platform}
extends       = common_stm32
build_flags   = ${common_stm32.build_flags}
  -Os
  -DHAL_PCD_MODULE_ENABLED
  -DDISABLE_GENERIC_SERIALUSB
  -DHAL_UART_MODULE_ENABLED
  -DTIMER_SERIAL=TIM9
board         = rumba32_f446ve
upload_protocol = dfu
monitor_speed = 500000

#################################
#                               #
#      Other Architectures      #
#                               #
#################################

#
# Espressif ESP32
#
[env:esp32]
platform      = espressif32@1.11.2
board         = esp32dev
build_flags   = ${common.build_flags} -DCORE_DEBUG_LEVEL=0
src_filter    = ${common.default_src_filter} +<src/HAL/ESP32>
upload_speed  = 115200
#upload_port   = marlinesp.local
#board_build.flash_mode = qio

#
# Teensy 3.1 / 3.2 (ARM Cortex-M4)
#
[env:teensy31]
platform      = teensy
board         = teensy31
src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY31_32>

#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
platform      = teensy
board         = teensy35
src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY35_36>

[env:teensy36]
platform      = teensy
board         = teensy36
src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY35_36>

#
# Teensy 4.0 / 4.1 (ARM Cortex-M7)
#
[env:teensy41]
platform      = teensy
board         = teensy41
src_filter    = ${common.default_src_filter} +<src/HAL/TEENSY40_41>

#
# Native
# No supported Arduino libraries, base Marlin only
#
[env:linux_native]
platform        = native
framework       =
build_flags     = -D__PLAT_LINUX__ -std=gnu++17 -ggdb -g -lrt -lpthread -D__MARLIN_FIRMWARE__ -Wno-expansion-to-defined
src_build_flags = -Wall -IMarlin/src/HAL/LINUX/include
build_unflags   = -Wall
lib_ldf_mode    = off
lib_deps        =
src_filter      = ${common.default_src_filter} +<src/HAL/LINUX>

#
# Just print the dependency tree
#
[env:include_tree]
platform    = atmelavr
board       = megaatmega2560
build_flags = -c -H -std=gnu++11 -Wall -Os -D__MARLIN_FIRMWARE__
src_filter  = +<src/MarlinCore.cpp>