MPEG1 Player

Introduction

Libdragon contains a MPEG-1 player. The player is based on pl_mpeg, but the core algorithms have been replaced by a RSP ucode that makes use of vectorization to speed up decoding.

The player is normally capable of playing back a 320x240 movie at 800 Kbit/s at 20 fps. You can use this as a ballpark for the expected quality.

How to encode a video

Libdragon's MPEG player works with raw MPEG1 video streams. Normally, MPEG1 videos come with the .mpg extension which signals the presence of the mpg container, with interleaved video and audio. Instead, raw MPEG1 streams are normally saved with the .m1v extension. To play a movie with audio, then, both a .m1v and a .wav64 file are required (see the videoplayer example).

Encode a video using ffmpeg

ffmpeg is very popular for video encoding, even though it is a bit inflexible with MPEG-1 (probably the format is too old and less developed). To encode a video that libdragon can playback, use this command line:

$ ffmpeg -i <INPUTFILE> -vb 800K -vf 'scale=320:240' -r 20 output.m1v

This creates a MPEG-1 file at resolution 320x240, at 20 FPS, with 800 Kbps of bitrate (average). You can play with the various encoding parameters to improve video quality or reduce stuttering. Notice that resolution disproportionately affect decoding speed, so see below for some suggested resolutions to try.

Unfortunately, ffmpeg does not seem to respect the provided bitrate close enough, so there might still be scenes where bitrates go through the roof. The MPEG-1 encoder does not offer many knobs to avoid this (at least that we could find).

Encode a video using TMPGEnc

TMPGEnc is a proprietary video encoder specialized in MPEG-1/2, which distributes a free version that's quite feature packed. The software is pretty old but it still runs correctly on Windows 10/11. It is far slower than ffmpeg at encoding, but it offers many more tuning knobs and a more gradual quality control. It is GUI only.

• Download and install the TMPGEnc free version.
• Download and install ffdshow. TMPGEnc is only able to decode video codecs for which a VFW plugin is installed, so ffdshow is probably the best choice to cover most common formats (like H.264).
• Run TMPGEnc, skip the wizard.
• Select the input file and output file at the bottom of the screen. Make sure that the option ES (Video Only) is selected.

• Click on Settings. Select MPEG-1 Video, the insert the resolution and select the desired framerate. At the bottom, in Motion Search Precision, you can bump the level to for instance Highest Quality (very slow), though this will affect encoding time, In Rate Control Mode, select Constant Quality (CQ), then click on Setting and move the slider to adjust the quality level. Try levels in the range 80-95, they usually work well enough. In that same screen, edit Maximum Bitrate and insert a value like 1000 that puts an upper cap to the per-frame bitrate.

• Confirm the settings, then press the Start button to begin encoding.

NOTE: TMPGEnc only supports AVI container as input file. Since the AVI format is very rare as a distribution format nowadays, it might be necessary to repackage the input file into AVI from MP4, MKV, OGG or other more modern format. This does not require a re-encoding, but just a change of container. With ffmpeg, you can do:

$ ffmpeg -i filename.mp4 -vcodec copy -acodec copy filename.avi

Suggested resolutions

In general, the resolution affects the decoding speed more than expected because of the infamous N64 memory access speed. It is generally suggested to decrease the resolution to recover room for increasing the bitrate.

MPEG1 videos must have width and height multiple of 16 (as they are encoded as sequences of 16x16 macroblocks), but libdragon's MPEG video player currently has a further constraint: the width must be a multiple of 32.

Aspect Ratio	Resolution	Comments
4:3	320x240	This is the "default" for 4:3 videos. Consider that on a CRT screen, about 16 pixels on each edge are overscanned, so part of your video will not visible
4:3	288x208	This is a "faster version" of 320x240, and if the video is displayed on a 320x240 framebuffer, it makes sure the whole image is visible on screen. The improvement in bitrate is evident, you can bump to 1 Mb or more
16:9	320x176	Default resolution for widescreen videos, letterboxed
16:9	288x160	This is a "faster version" of 320x176, to be displayed on a 320x240 framebuffer to achieve a widescreen video, fully visible on CRTs.

Audio encoding

Currently, the best option is to encode the audio with VADPCM compression which is supported by the wav64 format. First you need to extract the audio as uncompressed WAV file from the original movie:

$ ffmpeg -i filename.mkv -vn -acodec pcm_s16le -ar 32000 -ac 1 filename.wav

This resamples the audio at 32 Khz, mono (1 channel). It is a good balance for full motion videos between code size and quality, but you can of course change these parameters as you please.

Afterwards, you must convert the wav file to wav64 using the audioconv64 libdragon tool, which compresses audio files by default:

$ $N64_INST/bin/audioconv64 --verbose spring.wav
Converting: spring.wav => ./spring.wav64 (16 bits, 32000 Hz, 1 channels, vadpcm)