acusete-microcontroller.ino

#include <OneWire.h>
#include "pins.h"

//Temperature chip i/o
OneWire ds(DS18S20_DPIN); // on digital pin 2

void setup(void) {
  Serial.begin(9600);
  pinMode(LED_DPIN, OUTPUT);
}

void loop(void) {
  float temperature = getTemp();
  int ppm = analogRead(MQ_4_APIN);
  
  Serial.print(ppm);
  Serial.print(" ");
  Serial.print(temperature);
  Serial.print('\n');
    
//  if(temperature < 35 && ppm > 400) {
//    digitalWrite(LED_DPIN, HIGH);
//  }
  
  delay(100);
}

float getTemp(){
  //returns the temperature from one DS18S20 in DEG Celsius

  byte data[12];
  byte addr[8];

  if (!ds.search(addr)) {
      //no more sensors on chain, reset search
      ds.reset_search();
      return -1000;
  }

  if (OneWire::crc8( addr, 7) != addr[7]) {
      Serial.println("CRC is not valid!");
      return -1000;
  }

  if (addr[0] != 0x10 && addr[0] != 0x28) {
      Serial.print("Device is not recognized");
      return -1000;
  }

  ds.reset();
  ds.select(addr);
  ds.write(0x44, 1); // start conversion, with parasite power on at the end

  byte present = ds.reset();
  ds.select(addr);    
  ds.write(0xBE); // Read Scratchpad

  
  for (int i = 0; i < 9; i++) { // we need 9 bytes
    data[i] = ds.read();
  }
  
  ds.reset_search();
  
  byte MSB = data[1];
  byte LSB = data[0];

  float tempRead = ((MSB << 8) | LSB); //using two's compliment
  float TemperatureSum = tempRead / 16;
  
  return TemperatureSum;
  
}