This progam allows to control the SteelSeries per-key RGB keyboard backlighting on MSI laptops such as the GE63VR. It will not work on models with region-based backlighting (such as GE62VR and others). For those you should use tools like MSIKLM.
This is an unofficial tool, I am not affiliated to MSI nor SteelSeries in any way.
If you are on Archlinux, use this AUR package : msi-perkeyrgb (not up-to-date with the Git version yet)
For Debian or others :
git clone https://github.com/Deathle55/msi-perkeyrgb
cd msi-perkeyrgb/
sudo python3 setup.py install
sudo cp 99-msi-rgb.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules
pre-sets:
msi-perkeyrgb -p default
msi-perkeyrgb -p aqua
msi-perkeyrgb --model GS65 -p plain
backlight.msi:
all steady ffffff
arrows steady ffff00
fn steady ffc800
msi-perkeyrgb -c backlight.msi
how to turn it off
msi-perkeyrgb -d
Simple usage Steady color:
msi-perkeyrgb --model <MSI model> -s <COLOR>
Built-in preset (see --list-presets for available options):
msi-perkeyrgb --model <MSI model> -p <preset>
Advanced usage Set from configuration file:
msi-perkeyrgb --model <MSI model> -c <path to your configuration file>
Keys can be assigned a fixed color ("steady" mode), either through a configuration file for each individual key, or via a command-line argument for the whole keyboard,
A few select presets are also available for supported models, which emulate vendor-provided SteelSeries configurations.
This tool should probably work on any recent MSI laptop with a per-key RGB keyboard. It was tested with the following models :
| Model | Basic color support |
|---|---|
| GE63 | Yes |
| GE73 | Yes |
| GE75 | Yes |
| GL63 | Yes |
| GS63 | Yes |
| GS65 | Yes |
| GS75 | Yes |
| GT63 | Yes |
| GT75 | Yes |
| GP75 | Yes |
If you have some additional test results, feel free to open a GitHub issue to help expand this list !
- Python 3.4+
- setuptools
- Archlinux :
# pacman -S python-setuptools - Ubuntu :
# apt install python3-setuptools - Fedora :
# dnf install python3-setuptools
- Archlinux :
- libhidapi 0.8+
- Archlinux :
# pacman -S hidapi - Ubuntu :
# apt install libhidapi-hidraw0 - Fedora :
# dnf install hidapi
- Archlinux :
IMPORTANT : you need to have read/write access to the HID interface of your keyboard. The included udev rule should take care of that, but here are some instructions just in case :
The HID interface is shown as /dev/hidraw* where * can be 0, 1, 2... (there can be more than one if you have a USB mouse or keyboard plugged in). Find the right one (try them all if necessary) and give yourself permissions with # chmod 666 /dev/hidraw*.
Steady color :
msi-perkeyrgb --model <MSI model> -s <COLOR>
Built-in preset (see --list-presets for available options) :
msi-perkeyrgb --model <MSI model> -p <preset>
Set from configuration file :
msi-perkeyrgb --model <MSI model> -c <path to your configuration file>
The configuration file allows you to set individual key configurations. It can have any extension. See the dedicated wiki page for its syntax and examples.
The SteelSeries keyboard is connected to the MSI laptop by two independent interfaces :
- A PS/2 interface to send keypresses
- a USB HID-compliant interface to receive RGB commands
Talking to the RGB controller from Linux is a matter of sending the correct binary packets on the USB HID interface. I used Wireshark to capture the traffic between the SteelSeries Engine on Windows and the keyboard, and then analyzed the captured data to figure out the protocol used. I was only able to reverse-engineer the simple "steady color" commands, but that work was massively improved upon by TauAkiou, who figured out the rest of the protocol and implemented the remaining effects (UPDATE: effects support been disabled for now, for security reasons. See Askannz#24 ). His work include an amazingly detailed write-up of the protocol which you can read here.
Also thanks to tbh1 for providing packet dumps of presets effects.
The HID communication code was inspired by other tools designed for previous generations of MSI laptops, such as MSIKLM.