Releases: CTCaer/hekate
Releases · CTCaer/hekate
hekate - CTCaer mod v4.9
hekate - CTCaer mod v4.8
This version supports booting ALL current OS/CS CFW, Linux chainloading and payload tools.
No more SD card removals
Latest OFW supported: 7.0.1
New in this version
- Full 7.0.0/7.0.1 support.
The keys are generated via Atmosphère's sept. - Additionally the sept/payload.bin, if found that it is hekate, it gets updated via update.bin.
- Reboot to a selected boot entry via HOS hb
You can now force a boot configuration on hekate by setting the boot storage in the hekate binary.
This can be done via a homebrew, which sets the ini entry that is desired to boot.
Additionally force boot to menu can also be achieved. Please checkreadme.mdfor more - Auto NoGC
It checks fuses and applies the patch automatically if higher firmware.
It is now a global config and set on auto by default. (0: Disabled, 1: Auto) - Fixed a bug with ini list, where it would hang when using wildcard * with
kip1=. - Quality of life fixes under the hood, that ease user's life.
- As always many bug fixes and some refactoring.
Backlog from v4.6svc beta:
- svcControlCodeMemory patches that helps dynarec on emulators.
- Fixed sleep mode with debug mode when official 6.X.X secmon is used
- Added RTC driver which now also disables wake up alarm when Auto HOS Power Off is used
Helps when users that use AutoRCM inject and power off pretty fast. - Fixed GPU on Linux when booting from warmboot
- Added missing fallback auto calibration of sd cards and plus some small fixes.
Check readme.md for more.
NOTE: You will need sept and a custom warmboot binary to boot 7.X.X.
hekate - CTCaer mod v4.6 svc
New in this BETA
- Added patch for svcControlCodeMemory that helps dynarec on emulators.
- Fixed sleep mode when debug mode is on and official 6.X.X secmon is used
- Added RTC driver which now also disables wake up alarm when Auto HOS Power Off is used
Helps when users that use AutoRCM inject and power off pretty fast. - Fixed GPU on Linux when booting from warmboot
- Added missing fallback auto calibration of sd cards and plus some small fixes.
NOTE: You can get the other files (lp0 library) from a previous release.
hekate - CTCaer mod v4.6
This version supports booting ALL current OS/CS CFW, Linux chainloading and payload tools.
No more SD card removals
Latest OFW supported: 6.2.0
New in this version
- Fixed sleep for downgraded units with efuses burnt more than required.
- Fixed update.bin chainloading and also forced hw init on update, in case it changes again in the future.
This is a breaking fix and requires to have v4.6 to your modchip/dongle.
(Chainloading with old versions may or may not work. For that reason this is considered breaking.) - New archive bit fix
It can now also fix the Nintendo folder. No more "corrupted" sd when upgrading sd card or restoring Nintendo folder. - Fixed UART debug printing. Thanks @hyln9
- Auto HOS power is now disabled by default. Probably, most people learned what it does and can enable it from the Options menu.
- Some small SMMU emulation for TSEC fixes for the unluckiest out there. Max wait time remains small.
- Many many many fixes and also added some error msgs for restore and boot options.
NOTE: Everything hekate related, moved to bootloader folder.
Check readme.md for more.
hekate - CTCaer mod v4.5
This version supports booting ALL current OS/CS CFW, Linux chainloading and payload tools.
No more SD card removals
Latest OFW supported: 6.2.0
New in this version
- Full 6.2.0 support. Many thanks to @nwert and @balika011 for their help!
-Supports Secure Monitor and new Exosphere
-Supports booting 6.2.0 with less than 8 fuses
-It has100%success ratio
-Added support to "Print TSEC keys" and "Dump pkg1/2" tools - Fixed YouTube HDCP issue. Thanks @hexkyz for taking the time to investigate.
- Every file lister is now ignoring hidden files and .dot files. Thanks @StevenMattera
- The Minerva Training Cell library for hekate was updated to latest version (v1.1)
- Added "silent option to Auto HOS power off option. You can now choose if you want the logo to be shown. Thanks @Huntereb
- Refactored the monolithic main.c to simpler grouped sections. Additionally hos.c took some love.
- Many many bugfixes
NOTE: Everything hekate related, moved to bootloader folder.
Check readme.md for more.
hekate - CTCaer mod v4.2
This version supports booting ALL current OS/CS CFW, Linux chainloading and payload tools.
No more SD card removals
Latest OFW supported: 6.1.0
New in this hotfix version
- Support "*" folder wildcard in kip1 key
Using<folder>/*can now parse and load all kip and kip1 files inside that folder. - Add option to enable/disable Auto HOS power off
If you don't use a modchip/dongle you may find this feature annoying. Options->Auto HOS power off to disable. - Allow canceling of the verification process
Now you can cancel backup and verification process. If backup phase is done, canceling in verification, will keep your files. - Some small bugfixes and support certain cfw on its stock version
NOTE: Everything hekate related, moved to bootloader folder.
Check readme.md for more.
hekate - CTCaer mod v4.1
This version supports booting ALL current OS/CS CFW, Linux chainloading and payload tools.
No more SD card removals
New in this version
- Full 6.0.0 support
Secmon/ kernel patches, FS patches, sleep mode, hw config, etc. - Improved .ini/payload handling
hekate_ipl.ini is no longer required and hekate does not hang on empty folders. - PWM backlight
You can now change the backlight brightness. - Auto full power off when the device woke up from HOS' power off
Usefull with modchips/dongles when using AutoRCM. (You can see it as a breathing backlight with hekate's logo). - Backup can be now cancelled when in the writing process (white bar), by pressing VOL UP + DOWN.
- Self update chainloading properly checks for version number now to avoid uneeded loads.
- Support payloads with broken/bad hw init...
- Added ipatches info and dumping of patched/unpatched bootrom and ipatches
- Corrected some hw config changes found in 5.x-6.0.0
- More boot reasons and bootrom registers restores to normal
- It now properly restores BCT on dev units from where it's supposed to.
- Added warning message when the bootloader library for sleep mode is missing.
- And many many bugfixes
Everything hekate related, moved to bootloader folder.
Check readme.md for more.
hekate - CTCaer mod v4.0
This version now supports booting ALL current CFW, Linux chainloading and payload tools.
No more SD card removals
New in this version
- Added Payload launching. Supports: All current CFW bootloaders, Linux chainloading and payload tools.
Use the new entry in Launch, Payloads. Autoboot is supported via inis to all payloads. - Added Ianos, our module support loading and launching. First module is LP0 (sleep mode).
- Added support for split ini
They should be located to bootloader/ini. All cfw bootloaders, payloads and linux payloads are supported, along with Horizon files.
Autoboot support. Use the More configs menu in autoboot configuration. - Auto launch update for modchips. For users that do not like to always update their eeprom.
- Add KIP1 patching support
- Backup speed is now faster, by having bigger write speeds.
- Backup folder now uses eMMC serial number.
- AutoRCM now shows status and can unbrick all AutoRCM versions and types.
- If sd card is missing asks to continue. No more accidental stock HOS launching.
- Allow dumping of TSEC keys to sd card
- Fixed display sanitization for all firmwares. No more white flash or black screen.
- Fix critical bug to FatFs
- Countless fixes and bugfixes
- And many more..
Everything hekate related, moved to bootloader folder.
Check readme.md for more.
hekate - CTCaer mod v3.2
This version now supports sleep mode to all available firmwares!
New in this version
- Fixed sleep mode for 3.0.0 - 3.0.2
- Add status bar with battery info
Now you can always see your battery when into a time-consuming backup/restore. - Add background color support from bitmap's first pixel
If your logo is smaller than 720x1280, it will now use the first pixel as background color, instead of dark grey. - Add dumping of package2
- Unset archive bit to all sd card files re-added
Now it does not touch Nintendo folder. Keep in mind that this can mess with some homebrew. - Fixed an issue with a non-working firmware launching when "Dump package1" was used before.
- Changed partial backup message to inform about the sd card unmounting when in a menu.
- Some small bugfixes.
hekate - CTCaer mod v3.1
New in this version
- Implement millisecond timer
This is a must and a very important feature, because we expect to use the bootloader more than 71 minutes (Backup/Restore). This has the side-effect of fixing a lot of stuff. Especially on SDMMC operations.
If you had problems with read/write/verify on eMMC or SD, the new version is a must. - Fix the verification code at last!
Another side-effect of using a 32bit ms timer (from the μs original one). Plus additional fixes to variables that could not fit in u32 storage, makes the fix complete. Thanks to all the testers that helped to tackle these dreaded bugs.
Better redo that backup! - The Fusée patches for 4.X are now fixed
- The sd files archive bit removal tool, now only applies to switch folder