Do not work

[tekevics]

Hi!

I have a camera, using this 'hack', but have a message:

o.js:81 POST http://IP/cgi-bin/sdcard.sh 404 (Not Found)

Made a printenv:

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
CPU: VIVT data cache, VIVT instruction cache
Machine model: C330_HS_EVB_CBD_AK3918EV331_PTZ6_0_V1.0.0 dev board
Memory policy: Data cache writeback
ANYKA CPU AK39XXEV330 (ID 0x20160101)

Could somebody help me!

THX in advance

[Arkady23]

SD card in fat32? We also need to check the paths. Maybe something was copied really wrong. You'd better not write about the processor, but about the paths. What is the SD structure. What directories. The card itself should be visible by /mnt/sdcard/

[tekevics]

THX for really sudden react! 8-)

1. SD card in fat32? -> yes

2. What is the SD structure. What directories

ls -al /mnt/sdcard/

drwxr-xr-x 6 root root 4096 Jan 2 00:31 .
drwxrwxrwx 5 1000 1000 52 Mar 19 2021 ..
drwxr-xr-x 3 root root 4096 Jan 1 21:41 RecFiles
drwxr-xr-x 2 root root 4096 Jan 1 00:00 ark-add-on
drwxr-xr-x 2 root root 4096 Jan 1 00:00 bin
drwxr-xr-x 2 root root 4096 Jan 1 03:43 cgi-bin
-rwxr-xr-x 1 root root 854 Sep 5 2022 index.html.gz
-rwxr-xr-x 1 root root 13 Aug 3 2022 quick_check.ini
-rwxr-xr-x 1 root root 2113 Jan 1 04:50 quick_check_dump_26098981.txt
-rwxr-xr-x 1 root root 332 Jan 1 01:08 setup.sh

[Arkady23]

It looks like you have not completed the installation. After proper installation, these files should not be:
quick_check.in
quick_check_dump_26098981.txt
setup.sh
Then you need to perform the installation via setup.sh and show the protocol. What messages were issued?

[tekevics]

'... you have not completed the installation. ...'
Yes, you're right! I did not understand why it is. But after ran the setup.sh it is the state. But why?

[Arkady23]

I don't understand you. Type commands from setup.sh manually via telnet. And watch the messages. Write down what happened and how. Copy everything from the screen.

[tekevics]

[root@V380E ~]$ fl=/mnt/mtd/vg_boot.sh
[root@V380E ~]$ echo $fl
/mnt/mtd/vg_boot.sh
[root@V380E ~]$

[Arkady23]

And why did you introduce it? I didn't understand.

[tekevics]

sorry, i disunderstand you

[tekevics]

if grep -q startup.sh $fl
then
exit 1
else
...
fi

naturally it is exited

[tekevics]

THX in advance 8-)

[Arkady23]

Maybe you have a bad sd card?

[tekevics]

i really thought it in after 10000 try 8-)

[tekevics]

i do not want to bother you, but the changed sd card is not successed

[Arkady23]

I took a new camera with software 2021. I connected it through the application, prepared the sd, formatted it in exFAT under Windows. I logged into telnet and launched setup.sh -- file not found. Really need to enter like this (with an oblique and a dot):

[root@V380E /mnt/sdcard]$ ls -l
total 768
drwxr-xr-x    2 root     root        131072 Jan  6 12:40 RecFiles
drwxr-xr-x    2 root     root        131072 Jan  6  2023 System Volume Information
drwxr-xr-x    2 root     root        131072 Aug 14 11:10 ark-add-on
-rwxr-xr-x    1 root     root            13 Aug  3 23:26 quick_check.ini
-rwxr-xr-x    1 root     root          1555 Jan  1  1970 quick_check_dump_57694865.txt
-rwxr-xr-x    1 root     root           319 Sep 24 12:57 setup.sh
[root@V380E /mnt/sdcard]$ ./setup.sh
killall: as9nvserver: no process killed
killall: udp_broadcast: no process killed