🔧 Fix up WiFi options (MarlinFirmware#25586)

Andy-Big · Jul 11, 2023 · 843537d · 843537d
1 parent 6dd77df
commit 843537d
Show file tree

Hide file tree

Showing 15 changed files with 205 additions and 182 deletions.
diff --git a/Marlin/src/HAL/ESP32/HAL.h b/Marlin/src/HAL/ESP32/HAL.h
@@ -50,14 +50,12 @@
 
 #define MYSERIAL1 flushableSerial
 
-#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
-  #if ENABLED(ESP3D_WIFISUPPORT)
-    typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
-    extern DefaultSerial1 MSerial0;
-    #define MYSERIAL2 MSerial0
-  #else
-    #define MYSERIAL2 webSocketSerial
-  #endif
+#if ENABLED(ESP3D_WIFISUPPORT)
+  typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
+  extern DefaultSerial1 MSerial0;
+  #define MYSERIAL2 MSerial0
+#elif ENABLED(WIFISUPPORT)
+  #define MYSERIAL2 webSocketSerial
 #endif
 
 #define CRITICAL_SECTION_START() portENTER_CRITICAL(&hal.spinlock)

diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
@@ -4307,10 +4307,14 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive.");
 #endif
 
 /**
- * Sanity check for WIFI
+ * Sanity check WiFi options
  */
-#if EITHER(ESP3D_WIFISUPPORT, WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
-  #error "ESP3D_WIFISUPPORT or WIFISUPPORT requires an ESP32 MOTHERBOARD."
+#if ENABLED(ESP3D_WIFISUPPORT) && DISABLED(ARDUINO_ARCH_ESP32)
+  #error "ESP3D_WIFISUPPORT requires an ESP32 MOTHERBOARD."
+#elif ENABLED(WEBSUPPORT) && NONE(ARDUINO_ARCH_ESP32, WIFISUPPORT)
+  #error "WEBSUPPORT requires WIFISUPPORT and an ESP32 MOTHERBOARD."
+#elif BOTH(ESP3D_WIFISUPPORT, WIFISUPPORT)
+  #error "Enable only one of ESP3D_WIFISUPPORT or WIFISUPPORT."
 #endif
 
 /**

diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h
@@ -163,11 +163,13 @@
 #define TFT_LCD_MODULE_COM                     1
 #define TFT_LCD_MODULE_BAUDRATE              115600
 
-// ESP WiFi Use internal USART-2
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE             115600
-#define ESP_WIFI_MODULE_RESET_PIN             -1
-#define PIGGY_GPIO_PIN                        -1
+#if ENABLED(WIFISUPPORT)
+  // ESP WiFi Use internal USART-2
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE           115600
+  #define ESP_WIFI_MODULE_RESET_PIN           -1
+  #define PIGGY_GPIO_PIN                      -1
+#endif
 
 //
 // EEPROM

diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h
@@ -153,11 +153,13 @@
 #define TFT_LCD_MODULE_COM                     1
 #define TFT_LCD_MODULE_BAUDRATE              115200
 
-// ESP WiFi Use internal USART-2
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE             115200
-#define ESP_WIFI_MODULE_RESET_PIN             -1
-#define PIGGY_GPIO_PIN                        -1
+#if ENABLED(WIFISUPPORT)
+  // ESP WiFi Use internal USART-2
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE           115200
+  #define ESP_WIFI_MODULE_RESET_PIN           -1
+  #define PIGGY_GPIO_PIN                      -1
+#endif
 
 //
 // EEPROM

diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h
@@ -138,27 +138,29 @@
     #define DEFAULT_PWM_MOTOR_CURRENT { 800, 800, 800 }
   #endif
 
-  /**
-   * MKS Robin_Wifi or another ESP8266 module
-   *
-   *      __ESP(M1)__       -J1-
-   *  GND| 15 | | 08 |+3v3  (22)  RXD1      (PA10)
-   *     | 16 | | 07 |MOSI  (21)  TXD1      (PA9)   Active LOW, probably OK to leave floating
-   *  IO2| 17 | | 06 |MISO  (19)  IO1       (PC7)   Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
-   *  IO0| 18 | | 05 |CLK   (18)  IO0       (PA8)   Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating)
-   *  IO1| 19 | | 03 |EN    (03)  WIFI_EN           Must be HIGH for module to run
-   *     | nc | | nc |      (01)  WIFI_CTRL (PA5)
-   *   RX| 21 | | nc |
-   *   TX| 22 | | 01 |RST
-   *       ￣￣ AE￣￣
-   */
-  // Module ESP-WIFI
-  #define ESP_WIFI_MODULE_COM                  2  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
-  #define ESP_WIFI_MODULE_BAUDRATE      BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
-  #define ESP_WIFI_MODULE_RESET_PIN         PA5   // WIFI CTRL/RST
-  #define ESP_WIFI_MODULE_ENABLE_PIN        -1
-  #define ESP_WIFI_MODULE_TXD_PIN           PA9   // MKS or ESP WIFI RX PIN
-  #define ESP_WIFI_MODULE_RXD_PIN           PA10  // MKS or ESP WIFI TX PIN
+  #if ENABLED(WIFISUPPORT)
+    /**
+     * MKS Robin_Wifi or another ESP8266 module
+     *
+     *      __ESP(M1)__       -J1-
+     *  GND| 15 | | 08 |+3v3  (22)  RXD1      (PA10)
+     *     | 16 | | 07 |MOSI  (21)  TXD1      (PA9)   Active LOW, probably OK to leave floating
+     *  IO2| 17 | | 06 |MISO  (19)  IO1       (PC7)   Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
+     *  IO0| 18 | | 05 |CLK   (18)  IO0       (PA8)   Must be HIGH (ESP3D software configures this with a pullup so OK to leave as floating)
+     *  IO1| 19 | | 03 |EN    (03)  WIFI_EN           Must be HIGH for module to run
+     *     | nc | | nc |      (01)  WIFI_CTRL (PA5)
+     *   RX| 21 | | nc |
+     *   TX| 22 | | 01 |RST
+     *       ￣￣ AE￣￣
+     */
+    // Module ESP-WIFI
+    #define ESP_WIFI_MODULE_COM                2  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+    #define ESP_WIFI_MODULE_BAUDRATE    BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+    #define ESP_WIFI_MODULE_RESET_PIN       PA5   // WIFI CTRL/RST
+    #define ESP_WIFI_MODULE_ENABLE_PIN      -1
+    #define ESP_WIFI_MODULE_TXD_PIN         PA9   // MKS or ESP WIFI RX PIN
+    #define ESP_WIFI_MODULE_RXD_PIN         PA10  // MKS or ESP WIFI TX PIN
+  #endif
 #endif
 
 //

diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h
@@ -226,10 +226,11 @@
 
 #define SDSS                           SD_SS_PIN
 
-//
-// ESP WiFi can be soldered to J9 connector which is wired to USART2.
-// Must define WIFISUPPORT in Configuration.h for the printer.
-//
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE          115200
-#define ESP_WIFI_MODULE_RESET_PIN           -1
+#if ENABLED(WIFISUPPORT)
+  //
+  // ESP WiFi can be soldered to J9 connector which is wired to USART2.
+  //
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE        115200
+  #define ESP_WIFI_MODULE_RESET_PIN         -1
+#endif
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h
@@ -220,10 +220,11 @@
 
 #define SDSS                           SD_SS_PIN
 
-//
-// ESP WiFi can be soldered to J9 connector which is wired to USART2.
-// Must define WIFISUPPORT in Configuration.h for the printer.
-//
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE          115200
-#define ESP_WIFI_MODULE_RESET_PIN           -1
+#if ENABLED(WIFISUPPORT)
+  //
+  // ESP WiFi can be soldered to J9 connector which is wired to USART2.
+  //
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE        115200
+  #define ESP_WIFI_MODULE_RESET_PIN         -1
+#endif
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h
@@ -231,10 +231,11 @@
 
 #define SDSS                           SD_SS_PIN
 
-//
-// ESP WiFi can be soldered to J9 connector which is wired to USART2.
-// Must define WIFISUPPORT in Configuration.h for the printer.
-//
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE          115200
-#define ESP_WIFI_MODULE_RESET_PIN           -1
+#if ENABLED(WIFISUPPORT)
+  //
+  // ESP WiFi can be soldered to J9 connector which is wired to USART2.
+  //
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE        115200
+  #define ESP_WIFI_MODULE_RESET_PIN         -1
+#endif
diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h
@@ -223,10 +223,11 @@
 
 #define SDSS                           SD_SS_PIN
 
-//
-// ESP WiFi can be soldered to J9 connector which is wired to USART2.
-// Must define WIFISUPPORT in Configuration.h for the printer.
-//
-#define ESP_WIFI_MODULE_COM                    2
-#define ESP_WIFI_MODULE_BAUDRATE          115200
-#define ESP_WIFI_MODULE_RESET_PIN           -1
+#if ENABLED(WIFISUPPORT)
+  //
+  // ESP WiFi can be soldered to J9 connector which is wired to USART2.
+  //
+  #define ESP_WIFI_MODULE_COM                  2
+  #define ESP_WIFI_MODULE_BAUDRATE        115200
+  #define ESP_WIFI_MODULE_RESET_PIN         -1
+#endif
diff --git a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h
@@ -390,15 +390,16 @@
   #error "SD CUSTOM_CABLE is not compatible with BTT E3 RRF."
 #endif
 
-//
-// WIFI
-//
-
-#define ESP_WIFI_MODULE_COM                    3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
-#define ESP_WIFI_MODULE_BAUDRATE        BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
-#define ESP_WIFI_MODULE_RESET_PIN           PA4
-#define ESP_WIFI_MODULE_ENABLE_PIN          PA5
-#define ESP_WIFI_MODULE_GPIO0_PIN           PA6
+#if ENABLED(WIFISUPPORT)
+  //
+  // WIFI
+  //
+  #define ESP_WIFI_MODULE_COM                  3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+  #define ESP_WIFI_MODULE_BAUDRATE      BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+  #define ESP_WIFI_MODULE_RESET_PIN         PA4
+  #define ESP_WIFI_MODULE_ENABLE_PIN        PA5
+  #define ESP_WIFI_MODULE_GPIO0_PIN         PA6
+#endif
 
 #if ENABLED(BTT_E3_RRF_IDEX_BOARD)
   #define FPC2_PIN                          PB11

diff --git a/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h b/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h
@@ -542,26 +542,28 @@
   #define NEOPIXEL_PIN                      PB0
 #endif
 
-//
-// WIFI
-//
+#if ENABLED(WIFISUPPORT)
+  //
+  // WIFI
+  //
 
-/**
- *                      -------
- *            GND | 9  |       | 8 | 3.3V
- *  (ESP-CS) PB12 | 10 |       | 7 | PB15 (ESP-MOSI)
- *           3.3V | 11 |       | 6 | PB14 (ESP-MISO)
- * (ESP-IO0)  PD7 | 12 |       | 5 | PB13 (ESP-CLK)
- * (ESP-IO4) PD10 | 13 |       | 4 | --
- *             -- | 14 |       | 3 | PE15 (ESP-EN)
- *  (ESP-RX)  PD8 | 15 |       | 2 | --
- *  (ESP-TX)  PD9 | 16 |       | 1 | PE14 (ESP-RST)
- *                      -------
- *                       WIFI
- */
-#define ESP_WIFI_MODULE_COM                    3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
-#define ESP_WIFI_MODULE_BAUDRATE        BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
-#define ESP_WIFI_MODULE_RESET_PIN           PG7
-#define ESP_WIFI_MODULE_ENABLE_PIN          PG8
-#define ESP_WIFI_MODULE_GPIO0_PIN           PD7
-#define ESP_WIFI_MODULE_GPIO4_PIN           PD10
+  /**
+   *                      -------
+   *            GND | 9  |       | 8 | 3.3V
+   *  (ESP-CS) PB12 | 10 |       | 7 | PB15 (ESP-MOSI)
+   *           3.3V | 11 |       | 6 | PB14 (ESP-MISO)
+   * (ESP-IO0)  PD7 | 12 |       | 5 | PB13 (ESP-CLK)
+   * (ESP-IO4) PD10 | 13 |       | 4 | --
+   *             -- | 14 |       | 3 | PE15 (ESP-EN)
+   *  (ESP-RX)  PD8 | 15 |       | 2 | --
+   *  (ESP-TX)  PD9 | 16 |       | 1 | PE14 (ESP-RST)
+   *                      -------
+   *                       WIFI
+   */
+  #define ESP_WIFI_MODULE_COM                  3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+  #define ESP_WIFI_MODULE_BAUDRATE      BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+  #define ESP_WIFI_MODULE_RESET_PIN         PG7
+  #define ESP_WIFI_MODULE_ENABLE_PIN        PG8
+  #define ESP_WIFI_MODULE_GPIO0_PIN         PD7
+  #define ESP_WIFI_MODULE_GPIO4_PIN         PD10
+#endif
diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h
@@ -545,22 +545,24 @@
   #endif
 #endif
 
-//
-// WIFI
-//
+#if ENABLED(WIFISUPPORT)
+  //
+  // WIFI
+  //
 
-/**
- *          ------
- *      RX | 8  7 | 3.3V      GPIO0  PF14 ... Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
- *   GPIO0 | 6  5 | Reset     GPIO2  PF15 ... must be high (ESP3D software configures this with a pullup so OK to leave as floating)
- *   GPIO2 | 4  3 | Enable    Reset  PG0  ... active low, probably OK to leave floating
- *     GND | 2  1 | TX        Enable PG1  ... Must be high for module to run
- *          ------
- *            W1
- */
-#define ESP_WIFI_MODULE_COM                    6  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
-#define ESP_WIFI_MODULE_BAUDRATE        BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
-#define ESP_WIFI_MODULE_RESET_PIN           PG0
-#define ESP_WIFI_MODULE_ENABLE_PIN          PG1
-#define ESP_WIFI_MODULE_GPIO0_PIN           PF14
-#define ESP_WIFI_MODULE_GPIO2_PIN           PF15
+  /**
+   *          ------
+   *      RX | 8  7 | 3.3V      GPIO0  PF14 ... Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating)
+   *   GPIO0 | 6  5 | Reset     GPIO2  PF15 ... must be high (ESP3D software configures this with a pullup so OK to leave as floating)
+   *   GPIO2 | 4  3 | Enable    Reset  PG0  ... active low, probably OK to leave floating
+   *     GND | 2  1 | TX        Enable PG1  ... Must be high for module to run
+   *          ------
+   *            W1
+   */
+  #define ESP_WIFI_MODULE_COM                  6  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+  #define ESP_WIFI_MODULE_BAUDRATE      BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+  #define ESP_WIFI_MODULE_RESET_PIN         PG0
+  #define ESP_WIFI_MODULE_ENABLE_PIN        PG1
+  #define ESP_WIFI_MODULE_GPIO0_PIN         PF14
+  #define ESP_WIFI_MODULE_GPIO2_PIN         PF15
+#endif
diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h
@@ -554,25 +554,27 @@
   #define NEOPIXEL_PIN                      PE6
 #endif
 
-//
-// WIFI
-//
+#if ENABLED(WIFISUPPORT)
+  //
+  // WIFI
+  //
 
-/**
- *                      -------
- *            GND | 9  |       | 8 | 3.3V
- *  (ESP-CS) PB12 | 10 |       | 7 | PB15 (ESP-MOSI)
- *           3.3V | 11 |       | 6 | PB14 (ESP-MISO)
- * (ESP-IO0) PB10 | 12 |       | 5 | PB13 (ESP-CLK)
- * (ESP-IO4) PB11 | 13 |       | 4 | --
- *             -- | 14 |       | 3 | 3.3V (ESP-EN)
- *  (ESP-RX)  PD8 | 15 |       | 2 | --
- *  (ESP-TX)  PD9 | 16 |       | 1 | PC14 (ESP-RST)
- *                      -------
- *                       WIFI
- */
-#define ESP_WIFI_MODULE_COM                    3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
-#define ESP_WIFI_MODULE_BAUDRATE        BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
-#define ESP_WIFI_MODULE_RESET_PIN           PC14
-#define ESP_WIFI_MODULE_GPIO0_PIN           PB10
-#define ESP_WIFI_MODULE_GPIO4_PIN           PB11
+  /**
+   *                      -------
+   *            GND | 9  |       | 8 | 3.3V
+   *  (ESP-CS) PB12 | 10 |       | 7 | PB15 (ESP-MOSI)
+   *           3.3V | 11 |       | 6 | PB14 (ESP-MISO)
+   * (ESP-IO0) PB10 | 12 |       | 5 | PB13 (ESP-CLK)
+   * (ESP-IO4) PB11 | 13 |       | 4 | --
+   *             -- | 14 |       | 3 | 3.3V (ESP-EN)
+   *  (ESP-RX)  PD8 | 15 |       | 2 | --
+   *  (ESP-TX)  PD9 | 16 |       | 1 | PC14 (ESP-RST)
+   *                      -------
+   *                       WIFI
+   */
+  #define ESP_WIFI_MODULE_COM                  3  // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this
+  #define ESP_WIFI_MODULE_BAUDRATE      BAUDRATE  // Must use same BAUDRATE as SERIAL_PORT & SERIAL_PORT_2
+  #define ESP_WIFI_MODULE_RESET_PIN         PC14
+  #define ESP_WIFI_MODULE_GPIO0_PIN         PB10
+  #define ESP_WIFI_MODULE_GPIO4_PIN         PB11
+#endif