RLC-520A: IPC_523128M5MP_V2 v3.1.0.2368 build 23062701 #33
Dnominated
started this conversation in
Firmware sharing
Replies: 1 comment 2 replies
-
Thanks, v3.1.0.1387_22100622 has been added in e9c8cea. |
Beta Was this translation helpful? Give feedback.
2 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
Latest in the archive shows build 22082201 for RLC-520A hw 523128M5MP v2.
Build 22100622:
https://support-d.reolink.com/attachments/token/72ZbJjwx7YB3xvZP1fYl1cD7t/?name=IPC_523128M5MP_V2.1387_22100622.RLC-520A.OV05A10.5MP.REOLINK.pak
From: https://community.reolink.com/topic/3792/rlc-520a-v2-firmware/23?post_id=22939&lang=en-US
Tested on the hw listed above. Seems to work fine.
Build 23062701:
https://support-d.reolink.com/attachments/token/b32M4tyle4rDpYdNSATF25tZP?name=IPC_523128M5MP_V2.2368_23062701.RLC-520A.OV05A10.5MP.REOLINK.pak
Seems to work, but the RLN8-410-E H3MB16 (oldest hw version) with fw 2.0.0.274_20120701 gives a 'connection error' with this firmware. Re-flashed camera and reset, to build 22082201, then re-upgraded to this build. Same issue. NVR detects the camera on port 9000 - If the port is changed to 9001, it detects the camera operating on the new port, but maintains the 'Connection error' status. Everything else (Reolink app, web access) seems to work completely normally with this build. Worth noting that this is the oldest 8-channel NVR that Reolink made. I found the v2.0.0.280_21060101 build on AT0mykcs, and upgraded/flashed and reset the NVR, then attempted flashing the RLC-520A v2 to 23062701 again. This time it worked.
Note: it's probably not necessary to reset the NVR, to get the RLC-520Av2 Build 23062701 to work with it. I did it by accident, when choosing the 'Update Configurations' option, when updating the flash to v2.0.0.280_21060101. I didn't realize it would reset the NVR settings, like the lower choice 'Default Settings' and Restore button do.
Beta Was this translation helpful? Give feedback.
All reactions