Mqtt discovery for ha #323
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
remove unecessary MQTT_MAX_PACKET_SIZE definition
BME topic macro change add DHT sensor discovery
and correct a comment typo #327
add a condition to bypass this issue
replace by int for rssi storage
|
Add MQTT sensors and gateways discovery for home assistant |
ettiennegous
added a commit
to ettiennegous/OpenMQTTGateway
that referenced
this pull request
May 24, 2019
* ESPilight support Support for ESPilight - only recieve at the moment * Adjustments for sending Pilight messages including RAW messages https://manual.pilight.org/programs/debug.html https://manual.pilight.org/programs/raw.html Considering a RAW receive handler * Fixup callback and loop for Pilight - catches all messages per loop * Update Test_config.h * Added ESPilight libs * change default DHT pin for ESP32 following user feedback pin 16 works and 35 doesn't works * correct impossibility to read value with HM10 1technophile#281 and make the code more flexible (deduct an offset from a key value instead of fixed offset) * Increased size of mqtt_pass to char[30] (1technophile#288) * Increased size of mqtt_pass to char[30] * modified test_config.h too * Fixed typo and added a little formatting (1technophile#290) * Introduced WifiManager_ssid variable and documented user_config.h (1technophile#289) * Commented user_config.h to clarify usage of WifiManager * Introduced WifiManager_ssid variable * Added changes to Test_config.h too * multi gpio input module (1technophile#278) * GPIOKeyCode module added * Add Home Assistant MQTT room presence support (ESP32 only) (1technophile#294) * Add Home Assistant MQTT room presence support ESP32 only * Publish refactoring (1technophile#298) * factoring of the publishing function * integration of json publishing to MQTT * receiving and transcode json messages from mqtt * replace the TRACE runtime condition by a buildtime one so as to decrease program size * remove retainFlag parameter not necessary for the moment * Increase the scope of tests for arduino mega and esp32 * Update arduinojson library to 5.13.3 * add macros to choose between simple or json publishing or both * differentiate build test for ATmega2560 * correct wrong sprintf definition * change IDE version for continuous integration * let default warning level in arduino ide * correct pins for ESP32 * reorganize user_config * remove unecessary variable and PilighttoMQTT call * Update README.md * remove redundant code for home presence (1technophile#303) * correct duplicate comments and code * fix ESP32 ble (1technophile#304) * remove redundant code for home presence * hopefully fix ESP32 BLE hangs * basic support for duplicate detection when JSON publishing is active * correct double variable declaration and use arduino json implicit cast * Update ZgatewayRF2.ino (1technophile#309) Small fix for dimming with JSON payload. switchType 0 OFF switchType 1 ON switchType 2 DIM { "switchType": 2, "adress": "26494598", "unit": 10, "dim": 8 } * correct sonoff rf bridge issue not communicating with RF module 1technophile#310 * update rc-switch (1technophile#313) * more repeatSRFBwMQTT macro to pertinent config file 1technophile#295 * Update contributor list * Add images * add missing macro * update esppilight lib content of the library is not filtered on 433mhz only * Mqtt discovery (1technophile#320) * add mqtt discovery (compatibile with home assistant) with omg status binary sensor & bme280 sensor * added mqtt discovery to Test_config.h for ESP32 (ESP8266 & other boards was not tested) * include support for ESP8266 & arduino mega * fix getting MAC for esp8266 * esp8266 fix * make mqtt discovery functions functions more generic, readable and easy to use & extend * make mqtt discovery functions functions more generic, readable and easy to use & extend PART 2 * remove the macro for each attribute and supposing that if there is a bme280 we expose all * remove unecessaries files from pilight lib * move MQTT_MAX_PACKET_SIZE to pubsubclient library * per default deactivate mqtt ha discovery * wdt tip add and presence detection improvments -improve distance measurement -add wdt prevent tip -add conditional macro haroompresence * Mqtt discovery for ha (1technophile#323) * MQTT discovery factoring * add DHT discovery * BME topic macro change * add sensors to ha discovery * correct a comment typo 1technophile#327 * let the possibility at buildtime to don't publish service data * reduce string usage * change MQTT ONOFF actuator to ON OFF commands instead of true false * add ZactuatorONOFF discovery * add simple publishing for GPIO input * Add RF switch and gateway discovery * fix typo mistake 1technophile#324 * Fix compile error (1technophile#330) on rcswitch Introduced with 1technophile#313 * Default pin for ESP8266 should be RX (1technophile#332) * code cleanup and improvment (1technophile#339) * replace string by char array comparison * take mac adress from user_config for arduino ethernet shield * remove code for managing HM10 with version < v6xx * add sys measure call for arduino mega * code size decrease and optim * differentiate receiving and publishing mqtt for the new json option in user_config.h 1technophile#318 so as to avoid user with non modified controllers to have regression on receiving (per default receiving is activated for both json and simple and prioritary analysed for json) * Storevalue after pub to avoid duplicates publishing in slow environment * add per default Irremote protocol for arduino mega as the mega can handle the list without memory issue (contrary to the uno) set default mega pinout * set default protocol with to IR NEC when no protocol is set on json * differentiate ON OFF pin depending on board * remove cleanFS macro and correct reseting when mqtt fail at start clean FS now available from Arduino IDE tools menu (erase flash) * add some image ressources * add wifimanager config portal timeout 1technophile#350 in case of power outage so as to avoid to pop up the web page before the mqtt server restart * add specific pinout for RF on arduino mega * traces improvements, and code refactoring (RF315) * enable the link between OMG status and its components enable to have the link between OMG status and its sensors/gateways on the same place for HASS https://community.openmqttgateway.com/t/v0-9beta-testers-needed/242/2?u=1technophile * Update OpenMQTTGateway.ino * put RF EMITTER PIN according to doc * Update CONTRIBUTING.md * Update IRRemoteESP8266 version to 2.5.5 factorize IR send signal function between the 2 types of receiving Add new IRRemoteESP8266 protocols replace pins on mega according schema remove unecessaries spaces * Update ESPilight library to 0.16.0 tfa protocol kerui protocol * Enable to switch HM1X led by a macro 1technophile#357 if //#define HM_BLUE_LED_STOP true uncommented the HM1X led is off * add log output through mqtt 1technophile#135 //#define subjectTRACEtoMQTT Base_Topic Gateway_Name "/log" //uncomment if you want to see traces on /log topic * change default pin for rf receiver on ESP32 13 seems to don't work * Add LORA gateway first implementation of a lora gateway integration, tested on ttgo heltec boards with embedded lora module 1technophile#356 Sending and receiving working * Update README.md * Update README.md * add LORA gateway parameters following lora api library def https://github.com/sandeepmistry/arduino-LoRa/blob/master/API.md * a first try for mi flora and mi jia auto discovery on hass 1technophile#361 * add LORA gateway auto discovery * Some memory optimization for Arduino UNO following this thread: https://community.openmqttgateway.com/t/arduino-uno-ethernet-shield-reboots-on-receiving-rf-signal-on-v-0-9/346/22 Rework led management to avoid use of global variables and specify special JSON_MSG_BUFFER for arduino UNO led can now be used for all the boards generalize use of F macro for memory optimization change jsonbuffer calculation method reduce pubsubclient max packet size for uno and nano * Update README.md * no need of going >67 as the code can handle only unsigned long at this time * Add "repeat" field to RF JSON messages. (1technophile#372) * update pubsubclient release to 2.7 * update irremote ESP8266 to 2.5.6 * publish discovery for sensors BLE once per run, add ble white and black list Avoid publishing auto discovery on a time basis publish auto discovery only one time per BLE sensor add BLE white and black list implementation set black list mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoBT/set -m '{"black-list":["012314551615","4C6577889C79","edfrgtyjulik"]}' set white list mosquitto_pub -t home/OpenMQTTGateway/commands/MQTTtoBT/set -m '{"white-list":["012314551615","4C65A5553C79","edfrgtyjulik"]}' * remove optimistic and retain flag from auto discovery 1technophile#361 and add some json buffer size to avoid identifier lost * correct json buffer size optimizations * correct switch between modes raw versus message + protocol and add raw error codes (1technophile#374) has been discussed here: puuu/ESPiLight#39 * Add pilight repeater function 1technophile#369 set #define repeatPilightwMQTT true into config_RF.h to activate it * add comment for sonoff rf bridge IR add * Separate list of contributors for main file reading improvment add also missing contributors * correct deduplication issue with SRFB and improve OMG performance by reducing the receivingMQTT call numbers https://community.openmqttgateway.com/t/seeing-duplicated-messages/398/7 * Correct return always false when using HM10 and return number instead of char array for sensors values * add message if wrong pubsubclient library used * correct isue with using a different receiver with RFM69 than the default and ack issue 1technophile#376 1technophile#375 * revert thigh and tlow for sonoff rf bridge SRFBtoMQTT 1technophile#366 * correct wrong json object name * change actuator default assignment * change default input gpio pin * add comment for sonoff pin * Prepare 0.9.1 release * Add LORA to functions schema
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.